From: Alan Cox Date: Wed, 30 Jan 2008 12:33:14 +0000 (+0100) Subject: x86: isolate PIC/PIT in/out calls X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=466eed22d127a1f16e1251cdc54a9f8f944140c0;p=openwrt%2Fstaging%2Fblogic.git x86: isolate PIC/PIT in/out calls Rather than remove and/or mangle inb_p/outb_p we want to remove the use of them from inappropriate places. For the PIC/PIT this may eventually depend on 32/64bitism or similar so start by adding inb/outb_pit and inb/outb_pic so that we can make them use any scheme we settle on without disturbing the existing, correct (for ISA), port 0x80 usage. (eg we can make inb_pit use udelay without messing up inb_p). Floppy already does this for the fdc. That really only leaves the CMOS as a core logic item to tackle, and bits of parallel port handling in the chipset layers. Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 955dd43b1676..d4438ef296d8 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -1174,11 +1174,11 @@ static void reinit_timer(void) spin_lock_irqsave(&i8253_lock, flags); /* set the clock to HZ */ - outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ + outb_pit(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ udelay(10); - outb_p(LATCH & 0xff, PIT_CH0); /* LSB */ + outb_pit(LATCH & 0xff, PIT_CH0); /* LSB */ udelay(10); - outb(LATCH >> 8, PIT_CH0); /* MSB */ + outb_pit(LATCH >> 8, PIT_CH0); /* MSB */ udelay(10); spin_unlock_irqrestore(&i8253_lock, flags); #endif diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c index c76fef1ce355..ef62b07b2b48 100644 --- a/arch/x86/kernel/i8253.c +++ b/arch/x86/kernel/i8253.c @@ -43,26 +43,26 @@ static void init_pit_timer(enum clock_event_mode mode, switch(mode) { case CLOCK_EVT_MODE_PERIODIC: /* binary, mode 2, LSB/MSB, ch 0 */ - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ - outb(LATCH >> 8 , PIT_CH0); /* MSB */ + outb_pit(0x34, PIT_MODE); + outb_pit(LATCH & 0xff , PIT_CH0); /* LSB */ + outb_pit(LATCH >> 8 , PIT_CH0); /* MSB */ break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: if (evt->mode == CLOCK_EVT_MODE_PERIODIC || evt->mode == CLOCK_EVT_MODE_ONESHOT) { - outb_p(0x30, PIT_MODE); - outb_p(0, PIT_CH0); - outb_p(0, PIT_CH0); + outb_pit(0x30, PIT_MODE); + outb_pit(0, PIT_CH0); + outb_pit(0, PIT_CH0); } pit_disable_clocksource(); break; case CLOCK_EVT_MODE_ONESHOT: /* One shot setup */ - outb_p(0x38, PIT_MODE); pit_disable_clocksource(); + outb_pit(0x38, PIT_MODE); break; case CLOCK_EVT_MODE_RESUME: @@ -80,8 +80,8 @@ static void init_pit_timer(enum clock_event_mode mode, static int pit_next_event(unsigned long delta, struct clock_event_device *evt) { spin_lock(&i8253_lock); - outb_p(delta & 0xff , PIT_CH0); /* LSB */ - outb(delta >> 8 , PIT_CH0); /* MSB */ + outb_pit(delta & 0xff , PIT_CH0); /* LSB */ + outb_pit(delta >> 8 , PIT_CH0); /* MSB */ spin_unlock(&i8253_lock); return 0; @@ -153,15 +153,15 @@ static cycle_t pit_read(void) * count), it cannot be newer. */ jifs = jiffies; - outb_p(0x00, PIT_MODE); /* latch the count ASAP */ - count = inb_p(PIT_CH0); /* read the latched count */ - count |= inb_p(PIT_CH0) << 8; + outb_pit(0x00, PIT_MODE); /* latch the count ASAP */ + count = inb_pit(PIT_CH0); /* read the latched count */ + count |= inb_pit(PIT_CH0) << 8; /* VIA686a test code... reset the latch if count > max + 1 */ if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); + outb_pit(0x34, PIT_MODE); + outb_pit(LATCH & 0xff, PIT_CH0); + outb_pit(LATCH >> 8, PIT_CH0); count = LATCH - 1; } diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c index f201e7da1bbc..2d25b77102fe 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259_32.c @@ -289,20 +289,20 @@ void init_8259A(int auto_eoi) outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ /* - * outb_p - this has to work on a wide range of PC hardware. + * outb_pic - this has to work on a wide range of PC hardware. */ - outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - outb_p(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ + outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ if (auto_eoi) /* master does Auto EOI */ - outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); else /* master expects normal EOI */ - outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - outb_p(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ + outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ if (auto_eoi) /* * In AEOI mode we just have to mask the interrupt diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index 99c8406ae253..d3edb9f23f2c 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -359,25 +359,25 @@ void init_8259A(int auto_eoi) outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ /* - * outb_p - this has to work on a wide range of PC hardware. + * outb_pic - this has to work on a wide range of PC hardware. */ - outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ + outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_p(IRQ0_VECTOR, PIC_MASTER_IMR); + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ - outb_p(0x04, PIC_MASTER_IMR); + outb_pic(0x04, PIC_MASTER_IMR); if (auto_eoi) /* master does Auto EOI */ - outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); else /* master expects normal EOI */ - outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ + outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_p(IRQ8_VECTOR, PIC_SLAVE_IMR); + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR); + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); if (auto_eoi) /* diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c index 57f9ef5a324c..a2b030780aa9 100644 --- a/arch/x86/kernel/vmiclock_32.c +++ b/arch/x86/kernel/vmiclock_32.c @@ -237,7 +237,7 @@ static void __devinit vmi_time_init_clockevent(void) void __init vmi_time_init(void) { /* Disable PIT: BIOSes start PIT CH0 with 18.2hz peridic. */ - outb_p(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */ + outb_pit(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */ vmi_time_init_clockevent(); setup_irq(0, &vmi_clock_action); diff --git a/include/asm-x86/i8253.h b/include/asm-x86/i8253.h index 747548ec5d1d..b51c0487fc41 100644 --- a/include/asm-x86/i8253.h +++ b/include/asm-x86/i8253.h @@ -12,4 +12,7 @@ extern struct clock_event_device *global_clock_event; extern void setup_pit_timer(void); +#define inb_pit inb_p +#define outb_pit outb_p + #endif /* __ASM_I8253_H__ */ diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h index cabcc6cf3923..67c319e0efc7 100644 --- a/include/asm-x86/i8259.h +++ b/include/asm-x86/i8259.h @@ -29,4 +29,7 @@ extern void enable_8259A_irq(unsigned int irq); extern void disable_8259A_irq(unsigned int irq); extern unsigned int startup_8259A_irq(unsigned int irq); +#define inb_pic inb_p +#define outb_pic outb_p + #endif /* __ASM_I8259_H__ */