From: Aleksander Jan Bajkowski Date: Sat, 22 May 2021 18:07:56 +0000 (+0200) Subject: lantiq: replace patches with version accepted upstream X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=46468fc9d5d95279ab0b70914ae85a31a0a5efd6;p=openwrt%2Fstaging%2Frmilecki.git lantiq: replace patches with version accepted upstream Replace recently added patches with version accepted upstream. Signed-off-by: Aleksander Jan Bajkowski --- diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi index e379b07b533..27858be28fb 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi @@ -488,8 +488,6 @@ interrupt-names = "tx", "rx"; resets = <&reset0 21 16>, <&reset0 8 8>, <&reset0 3 3>; reset-names = "switch", "ppe", "ppe_dsp"; - lantiq,tx-burst-length = <8>; - lantiq,rx-burst-length = <8>; #address-cells = <1>; #size-cells = <0>; diff --git a/target/linux/lantiq/patches-5.10/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch b/target/linux/lantiq/patches-5.10/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch deleted file mode 100644 index fab24404537..00000000000 --- a/target/linux/lantiq/patches-5.10/0113-MIPS-lantiq-dma-make-a-burst-length-configurable-in-.patch +++ /dev/null @@ -1,84 +0,0 @@ -From 6615eeb39f7a110a196f20acbfb3a017da4d75d2 Mon Sep 17 00:00:00 2001 -From: Aleksander Jan Bajkowski -Date: Fri, 14 May 2021 21:25:08 +0200 -Subject: [PATCH 4/5] MIPS: lantiq: dma: make a burst length configurable in - drivers - -Make a burst length configurable in drivers. - -Signed-off-by: Aleksander Jan Bajkowski ---- - .../include/asm/mach-lantiq/xway/xway_dma.h | 2 +- - arch/mips/lantiq/xway/dma.c | 38 ++++++++++++++++--- - 2 files changed, 34 insertions(+), 6 deletions(-) - ---- a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h -+++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h -@@ -45,6 +45,6 @@ extern void ltq_dma_close(struct ltq_dma - extern void ltq_dma_alloc_tx(struct ltq_dma_channel *ch); - extern void ltq_dma_alloc_rx(struct ltq_dma_channel *ch); - extern void ltq_dma_free(struct ltq_dma_channel *ch); --extern void ltq_dma_init_port(int p); -+extern void ltq_dma_init_port(int p, int tx_burst, int rx_burst); - - #endif ---- a/arch/mips/lantiq/xway/dma.c -+++ b/arch/mips/lantiq/xway/dma.c -@@ -181,7 +181,7 @@ ltq_dma_free(struct ltq_dma_channel *ch) - EXPORT_SYMBOL_GPL(ltq_dma_free); - - void --ltq_dma_init_port(int p) -+ltq_dma_init_port(int p, int tx_burst, int rx_burst) - { - ltq_dma_w32(p, LTQ_DMA_PS); - switch (p) { -@@ -190,16 +190,44 @@ ltq_dma_init_port(int p) - * Tell the DMA engine to swap the endianness of data frames and - * drop packets if the channel arbitration fails. - */ -- ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN, -+ ltq_dma_w32_mask(0, (DMA_ETOP_ENDIANNESS | DMA_PDEN), - LTQ_DMA_PCTRL); - break; - -- case DMA_PORT_DEU: -- ltq_dma_w32((DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT) | -- (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT), -+ default: -+ break; -+ } -+ -+ switch (rx_burst) { -+ case 8: -+ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_8W_BURST << DMA_RX_BURST_SHIFT), - LTQ_DMA_PCTRL); - break; -+ case 4: -+ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_4W_BURST << DMA_RX_BURST_SHIFT), -+ LTQ_DMA_PCTRL); -+ break; -+ case 2: -+ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT), -+ LTQ_DMA_PCTRL); -+ break; -+ default: -+ break; -+ } - -+ switch (tx_burst) { -+ case 8: -+ ltq_dma_w32_mask(0x30, (DMA_PCTRL_8W_BURST << DMA_TX_BURST_SHIFT), -+ LTQ_DMA_PCTRL); -+ break; -+ case 4: -+ ltq_dma_w32_mask(0x30, (DMA_PCTRL_4W_BURST << DMA_TX_BURST_SHIFT), -+ LTQ_DMA_PCTRL); -+ break; -+ case 2: -+ ltq_dma_w32_mask(0x30, (DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT), -+ LTQ_DMA_PCTRL); -+ break; - default: - break; - } diff --git a/target/linux/lantiq/patches-5.10/0310-v5.16-MIPS-lantiq-dma-make-the-burst-length-configurable-b.patch b/target/linux/lantiq/patches-5.10/0310-v5.16-MIPS-lantiq-dma-make-the-burst-length-configurable-b.patch new file mode 100644 index 00000000000..33c06e9d778 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0310-v5.16-MIPS-lantiq-dma-make-the-burst-length-configurable-b.patch @@ -0,0 +1,86 @@ +From 49293bbc50cb7d44223eb49e0f7cb38e7dac2361 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Tue, 14 Sep 2021 23:21:01 +0200 +Subject: [PATCH 4/5] MIPS: lantiq: dma: make the burst length configurable by + the drivers + +Make the burst length configurable by the drivers. + +Signed-off-by: Aleksander Jan Bajkowski +Acked-by: Hauke Mehrtens +Signed-off-by: David S. Miller +--- + .../include/asm/mach-lantiq/xway/xway_dma.h | 2 +- + arch/mips/lantiq/xway/dma.c | 38 ++++++++++++++++--- + 2 files changed, 34 insertions(+), 6 deletions(-) + +--- a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h ++++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h +@@ -45,6 +45,6 @@ extern void ltq_dma_close(struct ltq_dma + extern void ltq_dma_alloc_tx(struct ltq_dma_channel *ch); + extern void ltq_dma_alloc_rx(struct ltq_dma_channel *ch); + extern void ltq_dma_free(struct ltq_dma_channel *ch); +-extern void ltq_dma_init_port(int p); ++extern void ltq_dma_init_port(int p, int tx_burst, int rx_burst); + + #endif +--- a/arch/mips/lantiq/xway/dma.c ++++ b/arch/mips/lantiq/xway/dma.c +@@ -181,7 +181,7 @@ ltq_dma_free(struct ltq_dma_channel *ch) + EXPORT_SYMBOL_GPL(ltq_dma_free); + + void +-ltq_dma_init_port(int p) ++ltq_dma_init_port(int p, int tx_burst, int rx_burst) + { + ltq_dma_w32(p, LTQ_DMA_PS); + switch (p) { +@@ -190,16 +190,44 @@ ltq_dma_init_port(int p) + * Tell the DMA engine to swap the endianness of data frames and + * drop packets if the channel arbitration fails. + */ +- ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN, ++ ltq_dma_w32_mask(0, (DMA_ETOP_ENDIANNESS | DMA_PDEN), + LTQ_DMA_PCTRL); + break; + +- case DMA_PORT_DEU: +- ltq_dma_w32((DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT) | +- (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT), ++ default: ++ break; ++ } ++ ++ switch (rx_burst) { ++ case 8: ++ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_8W_BURST << DMA_RX_BURST_SHIFT), + LTQ_DMA_PCTRL); + break; ++ case 4: ++ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_4W_BURST << DMA_RX_BURST_SHIFT), ++ LTQ_DMA_PCTRL); ++ break; ++ case 2: ++ ltq_dma_w32_mask(0x0c, (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT), ++ LTQ_DMA_PCTRL); ++ break; ++ default: ++ break; ++ } + ++ switch (tx_burst) { ++ case 8: ++ ltq_dma_w32_mask(0x30, (DMA_PCTRL_8W_BURST << DMA_TX_BURST_SHIFT), ++ LTQ_DMA_PCTRL); ++ break; ++ case 4: ++ ltq_dma_w32_mask(0x30, (DMA_PCTRL_4W_BURST << DMA_TX_BURST_SHIFT), ++ LTQ_DMA_PCTRL); ++ break; ++ case 2: ++ ltq_dma_w32_mask(0x30, (DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT), ++ LTQ_DMA_PCTRL); ++ break; + default: + break; + } diff --git a/target/linux/lantiq/patches-5.10/0710-net-lantiq-configure-burst-length-for-ethernet.patch b/target/linux/lantiq/patches-5.10/0710-net-lantiq-configure-burst-length-for-ethernet.patch deleted file mode 100644 index 0a2996813a0..00000000000 --- a/target/linux/lantiq/patches-5.10/0710-net-lantiq-configure-burst-length-for-ethernet.patch +++ /dev/null @@ -1,124 +0,0 @@ -From ec1a17a11aced3cd756e59d91ad6f50b7a2fabfb Mon Sep 17 00:00:00 2001 -From: Aleksander Jan Bajkowski -Date: Sun, 16 May 2021 15:52:06 +0200 -Subject: [PATCH 5/5] net: lantiq: configure burst length for ethernet - -Configure the burst length for Ethernet. This improves Ethernet -performance by 58%. According to the vendor BSP, 8W burst length -is supported by ar9 and newer SoCs. - -The NAT benchmark results on xRX200 (Down/Up): -* 2W: 330 Mb/s -* 4W: 432 Mb/s 372 Mb/s -* 8W: 520 Mb/s 389 Mb/s - -Tested on xRX200 and xRX330. - -Signed-off-by: Aleksander Jan Bajkowski ---- - drivers/net/ethernet/lantiq_etop.c | 21 ++++++++++++++++++--- - drivers/net/ethernet/lantiq_xrx200.c | 21 ++++++++++++++++++--- - 2 files changed, 36 insertions(+), 6 deletions(-) - ---- a/drivers/net/ethernet/lantiq_etop.c -+++ b/drivers/net/ethernet/lantiq_etop.c -@@ -148,6 +148,9 @@ struct ltq_etop_priv { - struct ltq_etop_chan txch; - struct ltq_etop_chan rxch; - -+ int tx_burst_len; -+ int rx_burst_len; -+ - int tx_irq; - int rx_irq; - -@@ -399,7 +402,7 @@ ltq_etop_dma_init(struct net_device *dev - int rx = priv->rx_irq - LTQ_DMA_ETOP; - int err; - -- ltq_dma_init_port(DMA_PORT_ETOP); -+ ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, priv->rx_burst_len); - - priv->txch.dma.nr = tx; - priv->txch.dma.dev = &priv->pdev->dev; -@@ -676,8 +679,8 @@ ltq_etop_tx(struct sk_buff *skb, struct - return NETDEV_TX_BUSY; - } - -- /* dma needs to start on a 16 byte aligned address */ -- byte_offset = CPHYSADDR(skb->data) % 16; -+ /* dma needs to start on a burst length value aligned address */ -+ byte_offset = CPHYSADDR(skb->data) % (priv->tx_burst_len * 4); - priv->txch.skb[priv->txch.dma.desc] = skb; - - netif_trans_update(dev); -@@ -925,6 +928,18 @@ static int ltq_etop_probe(struct platfor - spin_lock_init(&priv->lock); - SET_NETDEV_DEV(dev, &pdev->dev); - -+ err = device_property_read_u32(&pdev->dev, "lantiq,tx-burst-length", &priv->tx_burst_len); -+ if (err < 0) { -+ dev_err(&pdev->dev, "unable to read tx-burst-length property\n"); -+ return err; -+ } -+ -+ err = device_property_read_u32(&pdev->dev, "lantiq,rx-burst-length", &priv->rx_burst_len); -+ if (err < 0) { -+ dev_err(&pdev->dev, "unable to read rx-burst-length property\n"); -+ return err; -+ } -+ - netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8); - netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32); - priv->txch.netdev = dev; ---- a/drivers/net/ethernet/lantiq_xrx200.c -+++ b/drivers/net/ethernet/lantiq_xrx200.c -@@ -71,6 +71,9 @@ struct xrx200_priv { - struct net_device *net_dev; - struct device *dev; - -+ int tx_burst_len; -+ int rx_burst_len; -+ - __iomem void *pmac_reg; - }; - -@@ -316,8 +319,8 @@ static netdev_tx_t xrx200_start_xmit(str - if (unlikely(dma_mapping_error(priv->dev, mapping))) - goto err_drop; - -- /* dma needs to start on a 16 byte aligned address */ -- byte_offset = mapping % 16; -+ /* dma needs to start on a burst length value aligned address */ -+ byte_offset = mapping % (priv->tx_burst_len * 4); - - desc->addr = mapping - byte_offset; - /* Make sure the address is written before we give it to HW */ -@@ -369,7 +372,7 @@ static int xrx200_dma_init(struct xrx200 - int ret = 0; - int i; - -- ltq_dma_init_port(DMA_PORT_ETOP); -+ ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, priv->rx_burst_len); - - ch_rx->dma.nr = XRX200_DMA_RX; - ch_rx->dma.dev = priv->dev; -@@ -487,6 +490,18 @@ static int xrx200_probe(struct platform_ - if (err) - eth_hw_addr_random(net_dev); - -+ err = device_property_read_u32(dev, "lantiq,tx-burst-length", &priv->tx_burst_len); -+ if (err < 0) { -+ dev_err(dev, "unable to read tx-burst-length property\n"); -+ return err; -+ } -+ -+ err = device_property_read_u32(dev, "lantiq,rx-burst-length", &priv->rx_burst_len); -+ if (err < 0) { -+ dev_err(dev, "unable to read rx-burst-length property\n"); -+ return err; -+ } -+ - /* bring up the dma engine and IP core */ - err = xrx200_dma_init(priv); - if (err) diff --git a/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch b/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch new file mode 100644 index 00000000000..bf3b9036162 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch @@ -0,0 +1,126 @@ +From 14d4e308e0aa0b78dc7a059716861a4380de3535 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Tue, 14 Sep 2021 23:21:02 +0200 +Subject: [PATCH 5/5] net: lantiq: configure the burst length in ethernet + drivers + +Configure the burst length in Ethernet drivers. This improves +Ethernet performance by 58%. According to the vendor BSP, +8W burst length is supported by ar9 and newer SoCs. + +The NAT benchmark results on xRX200 (Down/Up): +* 2W: 330 Mb/s +* 4W: 432 Mb/s 372 Mb/s +* 8W: 520 Mb/s 389 Mb/s + +Tested on xRX200 and xRX330. + +Signed-off-by: Aleksander Jan Bajkowski +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/lantiq_etop.c | 21 ++++++++++++++++++--- + drivers/net/ethernet/lantiq_xrx200.c | 21 ++++++++++++++++++--- + 2 files changed, 36 insertions(+), 6 deletions(-) + +--- a/drivers/net/ethernet/lantiq_etop.c ++++ b/drivers/net/ethernet/lantiq_etop.c +@@ -148,6 +148,9 @@ struct ltq_etop_priv { + struct ltq_etop_chan txch; + struct ltq_etop_chan rxch; + ++ int tx_burst_len; ++ int rx_burst_len; ++ + int tx_irq; + int rx_irq; + +@@ -399,7 +402,7 @@ ltq_etop_dma_init(struct net_device *dev + int rx = priv->rx_irq - LTQ_DMA_ETOP; + int err; + +- ltq_dma_init_port(DMA_PORT_ETOP); ++ ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len); + + priv->txch.dma.nr = tx; + priv->txch.dma.dev = &priv->pdev->dev; +@@ -676,8 +679,8 @@ ltq_etop_tx(struct sk_buff *skb, struct + return NETDEV_TX_BUSY; + } + +- /* dma needs to start on a 16 byte aligned address */ +- byte_offset = CPHYSADDR(skb->data) % 16; ++ /* dma needs to start on a burst length value aligned address */ ++ byte_offset = CPHYSADDR(skb->data) % (priv->tx_burst_len * 4); + priv->txch.skb[priv->txch.dma.desc] = skb; + + netif_trans_update(dev); +@@ -925,6 +928,18 @@ static int ltq_etop_probe(struct platfor + spin_lock_init(&priv->lock); + SET_NETDEV_DEV(dev, &pdev->dev); + ++ err = device_property_read_u32(&pdev->dev, "lantiq,tx-burst-length", &priv->tx_burst_len); ++ if (err < 0) { ++ dev_err(&pdev->dev, "unable to read tx-burst-length property\n"); ++ return err; ++ } ++ ++ err = device_property_read_u32(&pdev->dev, "lantiq,rx-burst-length", &priv->rx_burst_len); ++ if (err < 0) { ++ dev_err(&pdev->dev, "unable to read rx-burst-length property\n"); ++ return err; ++ } ++ + netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8); + netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32); + priv->txch.netdev = dev; +--- a/drivers/net/ethernet/lantiq_xrx200.c ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -71,6 +71,9 @@ struct xrx200_priv { + struct net_device *net_dev; + struct device *dev; + ++ int tx_burst_len; ++ int rx_burst_len; ++ + __iomem void *pmac_reg; + }; + +@@ -316,8 +319,8 @@ static netdev_tx_t xrx200_start_xmit(str + if (unlikely(dma_mapping_error(priv->dev, mapping))) + goto err_drop; + +- /* dma needs to start on a 16 byte aligned address */ +- byte_offset = mapping % 16; ++ /* dma needs to start on a burst length value aligned address */ ++ byte_offset = mapping % (priv->tx_burst_len * 4); + + desc->addr = mapping - byte_offset; + /* Make sure the address is written before we give it to HW */ +@@ -369,7 +372,7 @@ static int xrx200_dma_init(struct xrx200 + int ret = 0; + int i; + +- ltq_dma_init_port(DMA_PORT_ETOP); ++ ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len); + + ch_rx->dma.nr = XRX200_DMA_RX; + ch_rx->dma.dev = priv->dev; +@@ -487,6 +490,18 @@ static int xrx200_probe(struct platform_ + if (err) + eth_hw_addr_random(net_dev); + ++ err = device_property_read_u32(dev, "lantiq,tx-burst-length", &priv->tx_burst_len); ++ if (err < 0) { ++ dev_err(dev, "unable to read tx-burst-length property\n"); ++ return err; ++ } ++ ++ err = device_property_read_u32(dev, "lantiq,rx-burst-length", &priv->rx_burst_len); ++ if (err < 0) { ++ dev_err(dev, "unable to read rx-burst-length property\n"); ++ return err; ++ } ++ + /* bring up the dma engine and IP core */ + err = xrx200_dma_init(priv); + if (err) diff --git a/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch b/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch new file mode 100644 index 00000000000..0b68179a486 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch @@ -0,0 +1,73 @@ +From 7e553c44f09a8f536090904c6db5b8c9dbafa03b Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Tue, 26 Oct 2021 22:59:01 +0200 +Subject: [PATCH] net: lantiq_xrx200: Hardcode the burst length value + +All SoCs with this IP core support 8 burst length. Hauke +suggested to hardcode this value and simplify the driver. + +Link: https://lkml.org/lkml/2021/9/14/1533 +Signed-off-by: Aleksander Jan Bajkowski +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/lantiq_xrx200.c | 21 ++++----------------- + 1 file changed, 4 insertions(+), 17 deletions(-) + +--- a/drivers/net/ethernet/lantiq_xrx200.c ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -23,6 +23,7 @@ + #define XRX200_DMA_DATA_LEN 0x600 + #define XRX200_DMA_RX 0 + #define XRX200_DMA_TX 1 ++#define XRX200_DMA_BURST_LEN 8 + + /* cpu port mac */ + #define PMAC_RX_IPG 0x0024 +@@ -71,9 +72,6 @@ struct xrx200_priv { + struct net_device *net_dev; + struct device *dev; + +- int tx_burst_len; +- int rx_burst_len; +- + __iomem void *pmac_reg; + }; + +@@ -320,7 +318,7 @@ static netdev_tx_t xrx200_start_xmit(str + goto err_drop; + + /* dma needs to start on a burst length value aligned address */ +- byte_offset = mapping % (priv->tx_burst_len * 4); ++ byte_offset = mapping % (XRX200_DMA_BURST_LEN * 4); + + desc->addr = mapping - byte_offset; + /* Make sure the address is written before we give it to HW */ +@@ -372,7 +370,8 @@ static int xrx200_dma_init(struct xrx200 + int ret = 0; + int i; + +- ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len); ++ ltq_dma_init_port(DMA_PORT_ETOP, XRX200_DMA_BURST_LEN, ++ XRX200_DMA_BURST_LEN); + + ch_rx->dma.nr = XRX200_DMA_RX; + ch_rx->dma.dev = priv->dev; +@@ -490,18 +489,6 @@ static int xrx200_probe(struct platform_ + if (err) + eth_hw_addr_random(net_dev); + +- err = device_property_read_u32(dev, "lantiq,tx-burst-length", &priv->tx_burst_len); +- if (err < 0) { +- dev_err(dev, "unable to read tx-burst-length property\n"); +- return err; +- } +- +- err = device_property_read_u32(dev, "lantiq,rx-burst-length", &priv->rx_burst_len); +- if (err < 0) { +- dev_err(dev, "unable to read rx-burst-length property\n"); +- return err; +- } +- + /* bring up the dma engine and IP core */ + err = xrx200_dma_init(priv); + if (err) diff --git a/target/linux/lantiq/patches-5.10/0712-v5.16-net-ethernet-lantiq_etop-Fix-compilation-error.patch b/target/linux/lantiq/patches-5.10/0712-v5.16-net-ethernet-lantiq_etop-Fix-compilation-error.patch new file mode 100644 index 00000000000..06f4bc2eeed --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0712-v5.16-net-ethernet-lantiq_etop-Fix-compilation-error.patch @@ -0,0 +1,26 @@ +From 68eabc348148ae051631e8dab13c3b1a85c82896 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Tue, 9 Nov 2021 23:23:54 +0100 +Subject: [PATCH] net: ethernet: lantiq_etop: Fix compilation error + +This fixes the error detected when compiling the driver. + +Fixes: 14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers") +Reported-by: kernel test robot +Signed-off-by: Aleksander Jan Bajkowski +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/lantiq_etop.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/ethernet/lantiq_etop.c ++++ b/drivers/net/ethernet/lantiq_etop.c +@@ -402,7 +402,7 @@ ltq_etop_dma_init(struct net_device *dev + int rx = priv->rx_irq - LTQ_DMA_ETOP; + int err; + +- ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len); ++ ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, priv->rx_burst_len); + + priv->txch.dma.nr = tx; + priv->txch.dma.dev = &priv->pdev->dev;