From: Alexander Shiyan Date: Mon, 3 Dec 2012 18:23:32 +0000 (+0400) Subject: serial: sccnxp: Rename header file to match functionality X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=463dcc42e4832150eb3de804682b924f9b73a91a;p=openwrt%2Fstaging%2Fblogic.git serial: sccnxp: Rename header file to match functionality Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index 9cb9d43a3a0e..e05ad4da44d9 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -118,7 +118,7 @@ static struct resource sc26xx_rsrc[] = { } }; -#include +#include static struct sccnxp_pdata sccnxp_data = { .reg_shift = 2, diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 3a4c57e6ea1e..c864353352c5 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #define SCCNXP_NAME "uart-sccnxp" #define SCCNXP_MAJOR 204 diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/sccnxp.h deleted file mode 100644 index 096de90cf848..000000000000 --- a/include/linux/platform_data/sccnxp.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * NXP (Philips) SCC+++(SCN+++) serial driver - * - * Copyright (C) 2012 Alexander Shiyan - * - * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __SCCNXP_H -#define __SCCNXP_H - -#define SCCNXP_MAX_UARTS 2 - -/* Output lines */ -#define LINE_OP0 1 -#define LINE_OP1 2 -#define LINE_OP2 3 -#define LINE_OP3 4 -#define LINE_OP4 5 -#define LINE_OP5 6 -#define LINE_OP6 7 -#define LINE_OP7 8 - -/* Input lines */ -#define LINE_IP0 9 -#define LINE_IP1 10 -#define LINE_IP2 11 -#define LINE_IP3 12 -#define LINE_IP4 13 -#define LINE_IP5 14 -#define LINE_IP6 15 - -/* Signals */ -#define DTR_OP 0 /* DTR */ -#define RTS_OP 4 /* RTS */ -#define DSR_IP 8 /* DSR */ -#define CTS_IP 12 /* CTS */ -#define DCD_IP 16 /* DCD */ -#define RNG_IP 20 /* RNG */ - -#define DIR_OP 24 /* Special signal for control RS-485. - * Goes high when transmit, - * then goes low. - */ - -/* Routing control signal 'sig' to line 'line' */ -#define MCTRL_SIG(sig, line) ((line) << (sig)) - -/* - * Example board initialization data: - * - * static struct resource sc2892_resources[] = { - * DEFINE_RES_MEM(UART_PHYS_START, 0x10), - * DEFINE_RES_IRQ(IRQ_EXT2), - * }; - * - * static struct sccnxp_pdata sc2892_info = { - * .frequency = 3686400, - * .mctrl_cfg[0] = MCTRL_SIG(DIR_OP, LINE_OP0), - * .mctrl_cfg[1] = MCTRL_SIG(DIR_OP, LINE_OP1), - * }; - * - * static struct platform_device sc2892 = { - * .name = "sc2892", - * .id = -1, - * .resource = sc2892_resources, - * .num_resources = ARRAY_SIZE(sc2892_resources), - * .dev = { - * .platform_data = &sc2892_info, - * }, - * }; - */ - -/* SCCNXP platform data structure */ -struct sccnxp_pdata { - /* Frequency (extrenal clock or crystal) */ - int frequency; - /* Shift for A0 line */ - const u8 reg_shift; - /* Modem control lines configuration */ - const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; - /* Timer value for polling mode (usecs) */ - const unsigned int poll_time_us; - /* Called during startup */ - void (*init)(void); - /* Called before finish */ - void (*exit)(void); -}; - -#endif diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h new file mode 100644 index 000000000000..215574d1e81d --- /dev/null +++ b/include/linux/platform_data/serial-sccnxp.h @@ -0,0 +1,95 @@ +/* + * NXP (Philips) SCC+++(SCN+++) serial driver + * + * Copyright (C) 2012 Alexander Shiyan + * + * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _PLATFORM_DATA_SERIAL_SCCNXP_H_ +#define _PLATFORM_DATA_SERIAL_SCCNXP_H_ + +#define SCCNXP_MAX_UARTS 2 + +/* Output lines */ +#define LINE_OP0 1 +#define LINE_OP1 2 +#define LINE_OP2 3 +#define LINE_OP3 4 +#define LINE_OP4 5 +#define LINE_OP5 6 +#define LINE_OP6 7 +#define LINE_OP7 8 + +/* Input lines */ +#define LINE_IP0 9 +#define LINE_IP1 10 +#define LINE_IP2 11 +#define LINE_IP3 12 +#define LINE_IP4 13 +#define LINE_IP5 14 +#define LINE_IP6 15 + +/* Signals */ +#define DTR_OP 0 /* DTR */ +#define RTS_OP 4 /* RTS */ +#define DSR_IP 8 /* DSR */ +#define CTS_IP 12 /* CTS */ +#define DCD_IP 16 /* DCD */ +#define RNG_IP 20 /* RNG */ + +#define DIR_OP 24 /* Special signal for control RS-485. + * Goes high when transmit, + * then goes low. + */ + +/* Routing control signal 'sig' to line 'line' */ +#define MCTRL_SIG(sig, line) ((line) << (sig)) + +/* + * Example board initialization data: + * + * static struct resource sc2892_resources[] = { + * DEFINE_RES_MEM(UART_PHYS_START, 0x10), + * DEFINE_RES_IRQ(IRQ_EXT2), + * }; + * + * static struct sccnxp_pdata sc2892_info = { + * .frequency = 3686400, + * .mctrl_cfg[0] = MCTRL_SIG(DIR_OP, LINE_OP0), + * .mctrl_cfg[1] = MCTRL_SIG(DIR_OP, LINE_OP1), + * }; + * + * static struct platform_device sc2892 = { + * .name = "sc2892", + * .id = -1, + * .resource = sc2892_resources, + * .num_resources = ARRAY_SIZE(sc2892_resources), + * .dev = { + * .platform_data = &sc2892_info, + * }, + * }; + */ + +/* SCCNXP platform data structure */ +struct sccnxp_pdata { + /* Frequency (extrenal clock or crystal) */ + int frequency; + /* Shift for A0 line */ + const u8 reg_shift; + /* Modem control lines configuration */ + const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + /* Timer value for polling mode (usecs) */ + const unsigned int poll_time_us; + /* Called during startup */ + void (*init)(void); + /* Called before finish */ + void (*exit)(void); +}; + +#endif