From: Gabor Juhos Date: Sun, 15 Aug 2010 09:43:07 +0000 (+0000) Subject: ramips: add support for Sparklan WCR-150GN board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=462dabc7f55d5e5f0aa7d63c10b66e25a091f405;p=openwrt%2Fstaging%2Fmans0n.git ramips: add support for Sparklan WCR-150GN board This patch adds support for Sparklan WCR-150GN board. Network configuration should be tweaked to make it work fully. The reason it's not in this patch is that ramips target should be modified to support different /etc/config/network files for different boards. Signed-off-by: Roman Yeryomin SVN-Revision: 22658 --- diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 22e2b64627..53d42a04eb 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -21,6 +21,7 @@ enum ramips_mach_type { RAMIPS_MACH_DIR_300_REVB, /* D-Link DIR-300 rev B */ /* RT3052 based machines */ + RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */ RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 532e471d77..e43261ed39 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -20,6 +20,12 @@ config RT305X_MACH_V22RW_2X2 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_WCR150GN + bool "Sparklan WCR-150GN support" + default y + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_FONERA20N bool "La Fonera20N board support" default y diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index a1278c3057..28cb88c630 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -13,5 +13,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o +obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c new file mode 100644 index 0000000000..3c3319b108 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c @@ -0,0 +1,68 @@ +/* + * Sparklan WCR-150GN board support + * + * Copyright (C) 2010 Roman Yeryomin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "devices.h" + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wcr150gn_partitions[] = { + { + .name = "Bootloader", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Config", + .offset = 0x030000, + .size = 0x040000, + }, { + .name = "Factory", + .offset = 0x040000, + .size = 0x050000, + }, { + .name = "Kernel", + .offset = 0x050000, + .size = 0x120000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x400000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data wcr150gn_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(wcr150gn_partitions), + .parts = wcr150gn_partitions, +#endif +}; + +static void __init wcr150gn_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_flash(0, &wcr150gn_flash_data); + rt305x_register_ethernet(); + rt305x_register_wifi(); +} + +MIPS_MACHINE(RAMIPS_MACH_WCR150GN, "WCR150GN", "Sparklan WCR-150GN", + wcr150gn_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 1addcbf22f..03be7647ce 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -96,12 +96,26 @@ define Image/Build/Profile/WHRG300N $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N) endef + +mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(Bootloader)ro,64k(Config),64k(Factory),832k(Kernel),2944k(rootfs),3776k@0x50000(firmware) +mtd_wcr150gn_kernel_part_size=851968 +mtd_wcr150gn_rootfs_part_size=3014656 +define Image/Build/Template/WCR150GN + $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_wcr150gn,$(mtd_wcr150gn_kernel_part_size),$(mtd_wcr150gn_rootfs_part_size)) +endef + +define Image/Build/Profile/WCR150GN + $(call Image/Build/Template/WCR150GN,$(1),wcr150gn,WCR150GN) +endef + + ifeq ($(CONFIG_RALINK_RT305X),y) define Image/Build/Profile/Default $(call Image/Build/Profile/DIR300B1,$(1)) $(call Image/Build/Profile/FONERA20N,$(1)) $(call Image/Build/Profile/V22RW2X2,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) + $(call Image/Build/Profile/WCR150GN,$(1)) endef endif diff --git a/target/linux/ramips/rt305x/config-2.6.32 b/target/linux/ramips/rt305x/config-2.6.32 index 9e8030aaac..c7ec775894 100644 --- a/target/linux/ramips/rt305x/config-2.6.32 +++ b/target/linux/ramips/rt305x/config-2.6.32 @@ -119,6 +119,7 @@ CONFIG_RALINK_RT305X=y CONFIG_RT305X_MACH_DIR_300_REVB=y CONFIG_RT305X_MACH_FONERA20N=y CONFIG_RT305X_MACH_V22RW_2X2=y +CONFIG_RT305X_MACH_WCR150GN=y CONFIG_RT305X_MACH_WHR_G300N=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_SCSI_DMA is not set diff --git a/target/linux/ramips/rt305x/config-2.6.34 b/target/linux/ramips/rt305x/config-2.6.34 index 513224a3cd..a493b5be18 100644 --- a/target/linux/ramips/rt305x/config-2.6.34 +++ b/target/linux/ramips/rt305x/config-2.6.34 @@ -129,6 +129,7 @@ CONFIG_RALINK_RT305X=y CONFIG_RT305X_MACH_DIR_300_REVB=y CONFIG_RT305X_MACH_FONERA20N=y CONFIG_RT305X_MACH_V22RW_2X2=y +CONFIG_RT305X_MACH_WCR150GN=y CONFIG_RT305X_MACH_WHR_G300N=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_SCSI_DMA is not set