From: Daniel Golle Date: Sat, 5 Oct 2024 21:19:43 +0000 (+0100) Subject: generic: phy: aquantia: correctly describe LED polarity X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=45bad8ba984fdecbd12523b58c2962c1cd4704db;p=openwrt%2Fstaging%2Fwigyori.git generic: phy: aquantia: correctly describe LED polarity Backport newly introduced support for 'active-high' property and use it to correctly implement polarity assignment for Aquantia PHY LEDs. Previously the 'active-low' property was used to switch a LED PIN to active-high ("drive VDD" in Aquantia-speak) mode. Signed-off-by: Daniel Golle --- diff --git a/target/linux/generic/backport-6.6/839-v6.13-net-phy-aquantia-fix-setting-active_low-bit.patch b/target/linux/generic/backport-6.6/839-v6.13-net-phy-aquantia-fix-setting-active_low-bit.patch new file mode 100644 index 0000000000..6072e02fd4 --- /dev/null +++ b/target/linux/generic/backport-6.6/839-v6.13-net-phy-aquantia-fix-setting-active_low-bit.patch @@ -0,0 +1,55 @@ +From patchwork Tue Sep 17 13:49:40 2024 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 13806176 +X-Patchwork-Delegate: kuba@kernel.org +Date: Tue, 17 Sep 2024 14:49:40 +0100 +From: Daniel Golle +To: Andrew Lunn , Heiner Kallweit , + Russell King , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , Paolo Abeni , + Daniel Golle , + Christian Marangi , + Bartosz Golaszewski , + Robert Marko , + Russell King , netdev@vger.kernel.org, + linux-kernel@vger.kernel.org +Subject: [PATCH net 1/2] net: phy: aquantia: fix setting active_low bit +Message-ID: + +Precedence: bulk +X-Mailing-List: netdev@vger.kernel.org +List-Id: +List-Subscribe: +List-Unsubscribe: +MIME-Version: 1.0 +Content-Disposition: inline +X-Patchwork-Delegate: kuba@kernel.org + +phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting +in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit. +Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit. + +Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") +Signed-off-by: Daniel Golle +Reviewed-by: Russell King (Oracle) +--- + drivers/net/phy/aquantia/aquantia_leds.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/net/phy/aquantia/aquantia_leds.c ++++ b/drivers/net/phy/aquantia/aquantia_leds.c +@@ -120,7 +120,8 @@ int aqr_phy_led_hw_control_set(struct ph + int aqr_phy_led_active_low_set(struct phy_device *phydev, int index, bool enable) + { + return phy_modify_mmd(phydev, MDIO_MMD_VEND1, AQR_LED_DRIVE(index), +- VEND1_GLOBAL_LED_DRIVE_VDD, enable); ++ VEND1_GLOBAL_LED_DRIVE_VDD, ++ enable ? VEND1_GLOBAL_LED_DRIVE_VDD : 0); + } + + int aqr_phy_led_polarity_set(struct phy_device *phydev, int index, unsigned long modes) diff --git a/target/linux/generic/backport-6.6/840-v6.13-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch b/target/linux/generic/backport-6.6/840-v6.13-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch new file mode 100644 index 0000000000..6d71b3d7a5 --- /dev/null +++ b/target/linux/generic/backport-6.6/840-v6.13-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch @@ -0,0 +1,72 @@ +From patchwork Tue Sep 17 13:49:55 2024 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 13806177 +X-Patchwork-Delegate: kuba@kernel.org +Date: Tue, 17 Sep 2024 14:49:55 +0100 +From: Daniel Golle +To: Andrew Lunn , Heiner Kallweit , + Russell King , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , Paolo Abeni , + Daniel Golle , + Christian Marangi , + Bartosz Golaszewski , + Robert Marko , + Russell King , netdev@vger.kernel.org, + linux-kernel@vger.kernel.org +Subject: [PATCH net 2/2] net: phy: aquantia: fix applying active_low bit + after reset +Message-ID: + <9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@makrotopia.org> +References: + +Precedence: bulk +X-Mailing-List: netdev@vger.kernel.org +List-Id: +List-Subscribe: +List-Unsubscribe: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: + +X-Patchwork-Delegate: kuba@kernel.org + +for_each_set_bit was used wrongly in aqr107_config_init() when iterating +over LEDs. Drop misleading 'index' variable and call +aqr_phy_led_active_low_set() for each set bit representing an LED which +is driven by VDD instead of GND pin. + +Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") +Signed-off-by: Daniel Golle +Reviewed-by: Russell King (Oracle) +--- + drivers/net/phy/aquantia/aquantia_main.c | 5 ++--- + 1 file changed, 2 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/aquantia/aquantia_main.c ++++ b/drivers/net/phy/aquantia/aquantia_main.c +@@ -530,7 +530,7 @@ static int aqr107_config_init(struct phy + { + struct aqr107_priv *priv = phydev->priv; + u32 led_active_low; +- int ret, index = 0; ++ int ret; + + /* Check that the PHY interface type is compatible */ + if (phydev->interface != PHY_INTERFACE_MODE_SGMII && +@@ -570,10 +570,9 @@ static int aqr107_config_init(struct phy + + /* Restore LED polarity state after reset */ + for_each_set_bit(led_active_low, &priv->leds_active_low, AQR_MAX_LEDS) { +- ret = aqr_phy_led_active_low_set(phydev, index, led_active_low); ++ ret = aqr_phy_led_active_low_set(phydev, led_active_low, true); + if (ret) + return ret; +- index++; + } + + return 0; diff --git a/target/linux/generic/backport-6.6/841-v6.13-net-phy-support-active-high-property-for-PHY-LEDs.patch b/target/linux/generic/backport-6.6/841-v6.13-net-phy-support-active-high-property-for-PHY-LEDs.patch new file mode 100644 index 0000000000..02706ccd3f --- /dev/null +++ b/target/linux/generic/backport-6.6/841-v6.13-net-phy-support-active-high-property-for-PHY-LEDs.patch @@ -0,0 +1,53 @@ +From a274465cc3bef2dfd9c9ea5100848dda0a8641e1 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Thu, 10 Oct 2024 13:54:19 +0100 +Subject: [PATCH 1/4] net: phy: support 'active-high' property for PHY LEDs + +In addition to 'active-low' and 'inactive-high-impedance' also +support 'active-high' property for PHY LED pin configuration. +As only either 'active-high' or 'active-low' can be set at the +same time, WARN and return an error in case both are set. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Link: https://patch.msgid.link/91598487773d768f254d5faf06cf65b13e972f0e.1728558223.git.daniel@makrotopia.org +Signed-off-by: Paolo Abeni +--- + drivers/net/phy/phy_device.c | 6 ++++++ + include/linux/phy.h | 5 +++-- + 2 files changed, 9 insertions(+), 2 deletions(-) + +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -3219,11 +3219,17 @@ static int of_phy_led(struct phy_device + if (index > U8_MAX) + return -EINVAL; + ++ if (of_property_read_bool(led, "active-high")) ++ set_bit(PHY_LED_ACTIVE_HIGH, &modes); + if (of_property_read_bool(led, "active-low")) + set_bit(PHY_LED_ACTIVE_LOW, &modes); + if (of_property_read_bool(led, "inactive-high-impedance")) + set_bit(PHY_LED_INACTIVE_HIGH_IMPEDANCE, &modes); + ++ if (WARN_ON(modes & BIT(PHY_LED_ACTIVE_LOW) && ++ modes & BIT(PHY_LED_ACTIVE_HIGH))) ++ return -EINVAL; ++ + if (modes) { + /* Return error if asked to set polarity modes but not supported */ + if (!phydev->drv->led_polarity_set) +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -872,8 +872,9 @@ struct phy_led { + + /* Modes for PHY LED configuration */ + enum phy_led_modes { +- PHY_LED_ACTIVE_LOW = 0, +- PHY_LED_INACTIVE_HIGH_IMPEDANCE = 1, ++ PHY_LED_ACTIVE_HIGH = 0, ++ PHY_LED_ACTIVE_LOW = 1, ++ PHY_LED_INACTIVE_HIGH_IMPEDANCE = 2, + + /* keep it last */ + __PHY_LED_MODES_NUM, diff --git a/target/linux/generic/backport-6.6/842-v6.13-net-phy-aquantia-correctly-describe-LED-polarity-ove.patch b/target/linux/generic/backport-6.6/842-v6.13-net-phy-aquantia-correctly-describe-LED-polarity-ove.patch new file mode 100644 index 0000000000..f26bb829e4 --- /dev/null +++ b/target/linux/generic/backport-6.6/842-v6.13-net-phy-aquantia-correctly-describe-LED-polarity-ove.patch @@ -0,0 +1,108 @@ +From 9d55e68b19f222e6334ef4021c5527998f5ab537 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Thu, 10 Oct 2024 13:55:00 +0100 +Subject: [PATCH 2/4] net: phy: aquantia: correctly describe LED polarity + override + +Use newly defined 'active-high' property to set the +VEND1_GLOBAL_LED_DRIVE_VDD bit and let 'active-low' clear that bit. This +reflects the technical reality which was inverted in the previous +description in which the 'active-low' property was used to actually set +the VEND1_GLOBAL_LED_DRIVE_VDD bit, which means that VDD (ie. supply +voltage) of the LED is driven rather than GND. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Link: https://patch.msgid.link/86a413b4387c42dcb54f587cc2433a06f16aae83.1728558223.git.daniel@makrotopia.org +Signed-off-by: Paolo Abeni +--- + drivers/net/phy/aquantia/aquantia.h | 1 + + drivers/net/phy/aquantia/aquantia_leds.c | 19 ++++++++++++++----- + drivers/net/phy/aquantia/aquantia_main.c | 12 +++++++++--- + 3 files changed, 24 insertions(+), 8 deletions(-) + +--- a/drivers/net/phy/aquantia/aquantia.h ++++ b/drivers/net/phy/aquantia/aquantia.h +@@ -169,6 +169,7 @@ static const struct aqr107_hw_stat aqr10 + struct aqr107_priv { + u64 sgmii_stats[AQR107_SGMII_STAT_SZ]; + unsigned long leds_active_low; ++ unsigned long leds_active_high; + }; + + #if IS_REACHABLE(CONFIG_HWMON) +--- a/drivers/net/phy/aquantia/aquantia_leds.c ++++ b/drivers/net/phy/aquantia/aquantia_leds.c +@@ -121,13 +121,13 @@ int aqr_phy_led_active_low_set(struct ph + { + return phy_modify_mmd(phydev, MDIO_MMD_VEND1, AQR_LED_DRIVE(index), + VEND1_GLOBAL_LED_DRIVE_VDD, +- enable ? VEND1_GLOBAL_LED_DRIVE_VDD : 0); ++ enable ? 0 : VEND1_GLOBAL_LED_DRIVE_VDD); + } + + int aqr_phy_led_polarity_set(struct phy_device *phydev, int index, unsigned long modes) + { ++ bool force_active_low = false, force_active_high = false; + struct aqr107_priv *priv = phydev->priv; +- bool active_low = false; + u32 mode; + + if (index >= AQR_MAX_LEDS) +@@ -136,7 +136,10 @@ int aqr_phy_led_polarity_set(struct phy_ + for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) { + switch (mode) { + case PHY_LED_ACTIVE_LOW: +- active_low = true; ++ force_active_low = true; ++ break; ++ case PHY_LED_ACTIVE_HIGH: ++ force_active_high = true; + break; + default: + return -EINVAL; +@@ -144,8 +147,14 @@ int aqr_phy_led_polarity_set(struct phy_ + } + + /* Save LED driver vdd state to restore on SW reset */ +- if (active_low) ++ if (force_active_low) + priv->leds_active_low |= BIT(index); + +- return aqr_phy_led_active_low_set(phydev, index, active_low); ++ if (force_active_high) ++ priv->leds_active_high |= BIT(index); ++ ++ if (force_active_high || force_active_low) ++ return aqr_phy_led_active_low_set(phydev, index, force_active_low); ++ ++ unreachable(); + } +--- a/drivers/net/phy/aquantia/aquantia_main.c ++++ b/drivers/net/phy/aquantia/aquantia_main.c +@@ -529,7 +529,7 @@ static int aqr107_config_mdi(struct phy_ + static int aqr107_config_init(struct phy_device *phydev) + { + struct aqr107_priv *priv = phydev->priv; +- u32 led_active_low; ++ u32 led_idx; + int ret; + + /* Check that the PHY interface type is compatible */ +@@ -569,8 +569,14 @@ static int aqr107_config_init(struct phy + return ret; + + /* Restore LED polarity state after reset */ +- for_each_set_bit(led_active_low, &priv->leds_active_low, AQR_MAX_LEDS) { +- ret = aqr_phy_led_active_low_set(phydev, led_active_low, true); ++ for_each_set_bit(led_idx, &priv->leds_active_low, AQR_MAX_LEDS) { ++ ret = aqr_phy_led_active_low_set(phydev, led_idx, true); ++ if (ret) ++ return ret; ++ } ++ ++ for_each_set_bit(led_idx, &priv->leds_active_high, AQR_MAX_LEDS) { ++ ret = aqr_phy_led_active_low_set(phydev, led_idx, false); + if (ret) + return ret; + } diff --git a/target/linux/generic/hack-6.6/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch b/target/linux/generic/hack-6.6/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch index 4ebddb3b45..522dbaf68f 100644 --- a/target/linux/generic/hack-6.6/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch +++ b/target/linux/generic/hack-6.6/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch @@ -97,7 +97,7 @@ Signed-off-by: Alex Marginean static int aqr_config_intr(struct phy_device *phydev) { bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED; -@@ -848,7 +916,7 @@ static struct phy_driver aqr_driver[] = +@@ -854,7 +922,7 @@ static struct phy_driver aqr_driver[] = PHY_ID_MATCH_MODEL(PHY_ID_AQR112), .name = "Aquantia AQR112", .probe = aqr107_probe, @@ -106,7 +106,7 @@ Signed-off-by: Alex Marginean .config_intr = aqr_config_intr, .handle_interrupt = aqr_handle_interrupt, .get_tunable = aqr107_get_tunable, -@@ -871,7 +939,7 @@ static struct phy_driver aqr_driver[] = +@@ -877,7 +945,7 @@ static struct phy_driver aqr_driver[] = PHY_ID_MATCH_MODEL(PHY_ID_AQR412), .name = "Aquantia AQR412", .probe = aqr107_probe, diff --git a/target/linux/generic/hack-6.6/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch b/target/linux/generic/hack-6.6/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch index b3767f1346..ed47187a3e 100644 --- a/target/linux/generic/hack-6.6/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch +++ b/target/linux/generic/hack-6.6/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch @@ -21,7 +21,7 @@ Signed-off-by: Daniel Golle #define MDIO_PHYXS_VEND_IF_STATUS 0xe812 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK GENMASK(7, 3) -@@ -1055,6 +1057,30 @@ static struct phy_driver aqr_driver[] = +@@ -1061,6 +1063,30 @@ static struct phy_driver aqr_driver[] = .led_hw_control_get = aqr_phy_led_hw_control_get, .led_polarity_set = aqr_phy_led_polarity_set, }, @@ -52,7 +52,7 @@ Signed-off-by: Daniel Golle }; module_phy_driver(aqr_driver); -@@ -1075,6 +1101,8 @@ static struct mdio_device_id __maybe_unu +@@ -1081,6 +1107,8 @@ static struct mdio_device_id __maybe_unu { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, diff --git a/target/linux/generic/pending-6.6/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-6.6/703-phy-add-detach-callback-to-struct-phy_driver.patch index aa83968263..a556a9cc40 100644 --- a/target/linux/generic/pending-6.6/703-phy-add-detach-callback-to-struct-phy_driver.patch +++ b/target/linux/generic/pending-6.6/703-phy-add-detach-callback-to-struct-phy_driver.patch @@ -23,7 +23,7 @@ Signed-off-by: Gabor Juhos sysfs_remove_link(&dev->dev.kobj, "phydev"); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -979,6 +979,12 @@ struct phy_driver { +@@ -980,6 +980,12 @@ struct phy_driver { /** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev); diff --git a/target/linux/generic/pending-6.6/750-net-phy-aquantia-fix-setting-active_low-bit.patch b/target/linux/generic/pending-6.6/750-net-phy-aquantia-fix-setting-active_low-bit.patch deleted file mode 100644 index 6072e02fd4..0000000000 --- a/target/linux/generic/pending-6.6/750-net-phy-aquantia-fix-setting-active_low-bit.patch +++ /dev/null @@ -1,55 +0,0 @@ -From patchwork Tue Sep 17 13:49:40 2024 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Daniel Golle -X-Patchwork-Id: 13806176 -X-Patchwork-Delegate: kuba@kernel.org -Date: Tue, 17 Sep 2024 14:49:40 +0100 -From: Daniel Golle -To: Andrew Lunn , Heiner Kallweit , - Russell King , - "David S. Miller" , - Eric Dumazet , - Jakub Kicinski , Paolo Abeni , - Daniel Golle , - Christian Marangi , - Bartosz Golaszewski , - Robert Marko , - Russell King , netdev@vger.kernel.org, - linux-kernel@vger.kernel.org -Subject: [PATCH net 1/2] net: phy: aquantia: fix setting active_low bit -Message-ID: - -Precedence: bulk -X-Mailing-List: netdev@vger.kernel.org -List-Id: -List-Subscribe: -List-Unsubscribe: -MIME-Version: 1.0 -Content-Disposition: inline -X-Patchwork-Delegate: kuba@kernel.org - -phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting -in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit. -Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit. - -Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") -Signed-off-by: Daniel Golle -Reviewed-by: Russell King (Oracle) ---- - drivers/net/phy/aquantia/aquantia_leds.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/net/phy/aquantia/aquantia_leds.c -+++ b/drivers/net/phy/aquantia/aquantia_leds.c -@@ -120,7 +120,8 @@ int aqr_phy_led_hw_control_set(struct ph - int aqr_phy_led_active_low_set(struct phy_device *phydev, int index, bool enable) - { - return phy_modify_mmd(phydev, MDIO_MMD_VEND1, AQR_LED_DRIVE(index), -- VEND1_GLOBAL_LED_DRIVE_VDD, enable); -+ VEND1_GLOBAL_LED_DRIVE_VDD, -+ enable ? VEND1_GLOBAL_LED_DRIVE_VDD : 0); - } - - int aqr_phy_led_polarity_set(struct phy_device *phydev, int index, unsigned long modes) diff --git a/target/linux/generic/pending-6.6/751-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch b/target/linux/generic/pending-6.6/751-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch deleted file mode 100644 index 6d71b3d7a5..0000000000 --- a/target/linux/generic/pending-6.6/751-net-phy-aquantia-fix-applying-active_low-bit-after-reset.patch +++ /dev/null @@ -1,72 +0,0 @@ -From patchwork Tue Sep 17 13:49:55 2024 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Daniel Golle -X-Patchwork-Id: 13806177 -X-Patchwork-Delegate: kuba@kernel.org -Date: Tue, 17 Sep 2024 14:49:55 +0100 -From: Daniel Golle -To: Andrew Lunn , Heiner Kallweit , - Russell King , - "David S. Miller" , - Eric Dumazet , - Jakub Kicinski , Paolo Abeni , - Daniel Golle , - Christian Marangi , - Bartosz Golaszewski , - Robert Marko , - Russell King , netdev@vger.kernel.org, - linux-kernel@vger.kernel.org -Subject: [PATCH net 2/2] net: phy: aquantia: fix applying active_low bit - after reset -Message-ID: - <9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@makrotopia.org> -References: - -Precedence: bulk -X-Mailing-List: netdev@vger.kernel.org -List-Id: -List-Subscribe: -List-Unsubscribe: -MIME-Version: 1.0 -Content-Disposition: inline -In-Reply-To: - -X-Patchwork-Delegate: kuba@kernel.org - -for_each_set_bit was used wrongly in aqr107_config_init() when iterating -over LEDs. Drop misleading 'index' variable and call -aqr_phy_led_active_low_set() for each set bit representing an LED which -is driven by VDD instead of GND pin. - -Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") -Signed-off-by: Daniel Golle -Reviewed-by: Russell King (Oracle) ---- - drivers/net/phy/aquantia/aquantia_main.c | 5 ++--- - 1 file changed, 2 insertions(+), 3 deletions(-) - ---- a/drivers/net/phy/aquantia/aquantia_main.c -+++ b/drivers/net/phy/aquantia/aquantia_main.c -@@ -530,7 +530,7 @@ static int aqr107_config_init(struct phy - { - struct aqr107_priv *priv = phydev->priv; - u32 led_active_low; -- int ret, index = 0; -+ int ret; - - /* Check that the PHY interface type is compatible */ - if (phydev->interface != PHY_INTERFACE_MODE_SGMII && -@@ -570,10 +570,9 @@ static int aqr107_config_init(struct phy - - /* Restore LED polarity state after reset */ - for_each_set_bit(led_active_low, &priv->leds_active_low, AQR_MAX_LEDS) { -- ret = aqr_phy_led_active_low_set(phydev, index, led_active_low); -+ ret = aqr_phy_led_active_low_set(phydev, led_active_low, true); - if (ret) - return ret; -- index++; - } - - return 0; diff --git a/target/linux/mediatek/dts/mt7988a-smartrg-mt-stuart.dtsi b/target/linux/mediatek/dts/mt7988a-smartrg-mt-stuart.dtsi index 93bbd0103b..ccf85fc110 100644 --- a/target/linux/mediatek/dts/mt7988a-smartrg-mt-stuart.dtsi +++ b/target/linux/mediatek/dts/mt7988a-smartrg-mt-stuart.dtsi @@ -433,7 +433,7 @@ reg = <2>; function = LED_FUNCTION_WAN; color = ; - active-low; + active-high; }; }; }; @@ -467,7 +467,7 @@ reg = <2>; function = LED_FUNCTION_LAN; color = ; - active-low; + active-high; }; }; };