From: Stefan Lippers-Hollmann Date: Fri, 18 May 2018 01:49:27 +0000 (+0200) Subject: ipq806x: increase kernel partition size for the Netgear Nighthawk X4 D7800 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=45b8a7c1a6415125f4fe872ec83b3d31a2fa799b;p=openwrt%2Fstaging%2Fynezz.git ipq806x: increase kernel partition size for the Netgear Nighthawk X4 D7800 Starting with kernel 4.14 and gcc 7, the kernel doesn't fit into the 2 MB reserved for the kernel partition by the OEM firmware anymore. This patch increases the kernel partition from 2 MB to 4 MB, at the expense of the rootfs, for all supported kernels. WARNING: This breaks sysupgrade! Flashing a firmware containing this changed partitioning from an older image with 2 MB reserved for the kernel partion requires the tftp recovery procedure, thereby losing all settings. This change follows the functional example of the Netgear r7800, but has not been runtime tested on a Netgear Nighthawk X4 D7800. Signed-off-by: Stefan Lippers-Hollmann Cc: Tathagata Das --- diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts index b7c49cc816..e22a9292a3 100644 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts @@ -250,12 +250,12 @@ kernel@1480000 { label = "kernel"; - reg = <0x1480000 0x0200000>; + reg = <0x1480000 0x0400000>; }; - ubi@1680000 { + ubi@1880000 { label = "ubi"; - reg = <0x1680000 0x1E00000>; + reg = <0x1880000 0x1C00000>; }; netgear@3480000 { diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-d7800.dts index b7c49cc816..e22a9292a3 100644 --- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-d7800.dts +++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-d7800.dts @@ -250,12 +250,12 @@ kernel@1480000 { label = "kernel"; - reg = <0x1480000 0x0200000>; + reg = <0x1480000 0x0400000>; }; - ubi@1680000 { + ubi@1880000 { label = "ubi"; - reg = <0x1680000 0x1E00000>; + reg = <0x1880000 0x1C00000>; }; netgear@3480000 { diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index 8b302b658d..496564de38 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -104,7 +104,7 @@ TARGET_DEVICES += linksys_ea8500 define Device/netgear_d7800 $(call Device/DniImage) DEVICE_DTS := qcom-ipq8064-d7800 - KERNEL_SIZE := 2097152 + KERNEL_SIZE := 4194304 NETGEAR_BOARD_ID := D7800 NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4 BLOCKSIZE := 128k