From: Simon Glass <sjg@chromium.org>
Date: Sat, 5 Nov 2011 04:46:50 +0000 (+0000)
Subject: tegra2: spi: Support SPI / UART switch
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4560c7decc1b13121072621cee9874e042c059b7;p=project%2Fbcm63xx%2Fu-boot.git

tegra2: spi: Support SPI / UART switch

Add the SPI / UART switch logic into the Tegra2 SPI driver so that it
can co-exist with the NS16550 UART.

We need the ns16550.h header for NS16550_t for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
---

diff --git a/drivers/spi/tegra2_spi.c b/drivers/spi/tegra2_spi.c
index fdcad093cf..56cb22963d 100644
--- a/drivers/spi/tegra2_spi.c
+++ b/drivers/spi/tegra2_spi.c
@@ -28,9 +28,11 @@
 #include <spi.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
+#include <ns16550.h>
 #include <asm/arch/clk_rst.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/pinmux.h>
+#include <asm/arch/uart-spi-switch.h>
 #include <asm/arch/tegra2_spi.h>
 
 struct tegra_spi_slave {
@@ -128,6 +130,16 @@ int spi_claim_bus(struct spi_slave *slave)
 	 */
 	pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
 	pinmux_tristate_disable(PINGRP_LSPI);
+
+#ifndef CONFIG_SPI_UART_SWITCH
+	/*
+	 * NOTE:
+	 * Only set PinMux bits 3:2 to SPI here on boards that don't have the
+	 * SPI UART switch or subsequent UART data won't go out!  See
+	 * spi_uart_switch().
+	 */
+	/* TODO: pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); */
+#endif
 	return 0;
 }
 
@@ -145,6 +157,8 @@ void spi_cs_activate(struct spi_slave *slave)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
 
+	pinmux_select_spi();
+
 	/* CS is negated on Tegra, so drive a 1 to get a 0 */
 	setbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
 }