From: Joe Mullally Date: Mon, 30 Aug 2021 21:35:05 +0000 (+0100) Subject: ath79: Move TPLink WPA8630Pv2 to ath79-tiny target X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=44e1e5d;p=openwrt%2Fstaging%2Frmilecki.git ath79: Move TPLink WPA8630Pv2 to ath79-tiny target These devices only have 6MiB available for firmware, which is not enough for recent release images, so move these to the tiny target. Note for users sysupgrading from the previous ath79-generic snapshot images: The tiny target kernel has a 4Kb flash erase block size instead of the generic target's 64kb. This means the JFFS2 overlay partition containing settings must be reformatted with the new block size or else there will be data corruption. To do this, backup your settings before upgrading, then during the sysupgrade, de-select "Keep Settings". On the CLI, use "sysupgrade -n". If you forget to do this and your system becomes unstable after upgrading, you can do this to format the partition and recover: * Reboot * Press RESET when Power LED blinks during boot to enter Failsafe mode * SSH to 192.168.1.1 * Run "firstboot" and reboot Signed-off-by: Joe Mullally Tested-by: Robert Högberg --- diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 2ce489b0d1a..e22cee51a3e 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -401,10 +401,7 @@ tplink,tl-mr6400-v1) ucidef_set_led_netdev "wan" "WAN" "white:wan" "eth1" ucidef_set_led_netdev "4g" "4G" "white:4g" "usb0" ;; -tplink,tl-wpa8630-v1|\ -tplink,tl-wpa8630p-v2-int|\ -tplink,tl-wpa8630p-v2.0-eu|\ -tplink,tl-wpa8630p-v2.1-eu) +tplink,tl-wpa8630-v1) ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c" ;; tplink,tl-wr841hp-v2|\ diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index bc32081910f..2f0208b288a 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -440,10 +440,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:1" "2:lan:3" "3:lan:2" ;; - tplink,tl-wpa8630-v1|\ - tplink,tl-wpa8630p-v2-int|\ - tplink,tl-wpa8630p-v2.0-eu|\ - tplink,tl-wpa8630p-v2.1-eu) + tplink,tl-wpa8630-v1) # port 5 (internal) is the power-line port ucidef_add_switch "switch0" \ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index b8e99a661f3..348b8839b6d 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -249,10 +249,7 @@ case "$FIRMWARE" in ;; tplink,eap225-outdoor-v1|\ tplink,eap225-v3|\ - tplink,eap225-wall-v2|\ - tplink,tl-wpa8630p-v2-int|\ - tplink,tl-wpa8630p-v2.0-eu|\ - tplink,tl-wpa8630p-v2.1-eu) + tplink,eap225-wall-v2) caldata_extract "art" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 37a0fcc1692..6479f6e26a8 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -640,36 +640,6 @@ define Device/tplink_tl-wpa8630-v1 endef TARGET_DEVICES += tplink_tl-wpa8630-v1 -define Device/tplink_tl-wpa8630p-v2 - $(Device/tplink-safeloader) - SOC := qca9563 - DEVICE_MODEL := TL-WPA8630P - IMAGE_SIZE := 6016k - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct -endef - -define Device/tplink_tl-wpa8630p-v2-int - $(Device/tplink_tl-wpa8630p-v2) - DEVICE_VARIANT := v2 (Int.) - TPLINK_BOARD_ID := TL-WPA8630P-V2-INT -endef -TARGET_DEVICES += tplink_tl-wpa8630p-v2-int - -define Device/tplink_tl-wpa8630p-v2.0-eu - $(Device/tplink_tl-wpa8630p-v2) - DEVICE_VARIANT := v2.0 (EU) - TPLINK_BOARD_ID := TL-WPA8630P-V2.0-EU - SUPPORTED_DEVICES += tplink,tl-wpa8630p-v2-eu -endef -TARGET_DEVICES += tplink_tl-wpa8630p-v2.0-eu - -define Device/tplink_tl-wpa8630p-v2.1-eu - $(Device/tplink_tl-wpa8630p-v2) - DEVICE_VARIANT := v2.1 (EU) - TPLINK_BOARD_ID := TL-WPA8630P-V2.1-EU -endef -TARGET_DEVICES += tplink_tl-wpa8630p-v2.1-eu - define Device/tplink_tl-wr1043nd-v1 $(Device/tplink-8m) SOC := ar9132 diff --git a/target/linux/ath79/image/tiny-tp-link.mk b/target/linux/ath79/image/tiny-tp-link.mk index c918c6baa68..2110f08b524 100644 --- a/target/linux/ath79/image/tiny-tp-link.mk +++ b/target/linux/ath79/image/tiny-tp-link.mk @@ -223,6 +223,41 @@ define Device/tplink_tl-wa901nd-v5 endef TARGET_DEVICES += tplink_tl-wa901nd-v5 +define Device/tplink_tl-wpa8630p-v2 + $(Device/tplink-safeloader) + SOC := qca9563 + DEVICE_MODEL := TL-WPA8630P + IMAGE_SIZE := 6016k + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct + DEVICE_COMPAT_VERSION := 2.0 + DEVICE_COMPAT_MESSAGE := The flash erase blocksize has changed to 4k from the 64k in previous versions, \ + so the JFFS2 settings partition MUST be reformatted to avoid data corruption. \ + Backup your settings before upgrading, then during sysupgrade, \ + de-select "Keep settings" and select "Force" to continue (equivilant to "sysupgrade -n -F"). +endef + +define Device/tplink_tl-wpa8630p-v2-int + $(Device/tplink_tl-wpa8630p-v2) + DEVICE_VARIANT := v2 (Int.) + TPLINK_BOARD_ID := TL-WPA8630P-V2-INT +endef +TARGET_DEVICES += tplink_tl-wpa8630p-v2-int + +define Device/tplink_tl-wpa8630p-v2.0-eu + $(Device/tplink_tl-wpa8630p-v2) + DEVICE_VARIANT := v2.0 (EU) + TPLINK_BOARD_ID := TL-WPA8630P-V2.0-EU + SUPPORTED_DEVICES += tplink,tl-wpa8630p-v2-eu +endef +TARGET_DEVICES += tplink_tl-wpa8630p-v2.0-eu + +define Device/tplink_tl-wpa8630p-v2.1-eu + $(Device/tplink_tl-wpa8630p-v2) + DEVICE_VARIANT := v2.1 (EU) + TPLINK_BOARD_ID := TL-WPA8630P-V2.1-EU +endef +TARGET_DEVICES += tplink_tl-wpa8630p-v2.1-eu + define Device/tplink_tl-wr703n $(Device/tplink-4mlzma) SOC := ar9331 diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds index 72df8b3dea0..f705c5c718e 100644 --- a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds @@ -93,6 +93,11 @@ tplink,tl-wa850re-v2) ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "blue:signal4" "wlan0" "60" "100" ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "blue:signal5" "wlan0" "80" "100" ;; +tplink,tl-wpa8630p-v2-int|\ +tplink,tl-wpa8630p-v2.0-eu|\ +tplink,tl-wpa8630p-v2.1-eu) + ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c" + ;; tplink,tl-wr940n-v3|\ tplink,tl-wr940n-v4|\ tplink,tl-wr941nd-v6) diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network index 45335c7c895..77b2444819f 100644 --- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network +++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network @@ -82,6 +82,13 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" ;; + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.0-eu|\ + tplink,tl-wpa8630p-v2.1-eu) + # port 5 (internal) is the power-line port + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" + ;; tplink,tl-wr941-v2) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" ;; diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version b/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version new file mode 100644 index 00000000000..b6c2ae48f75 --- /dev/null +++ b/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version @@ -0,0 +1,20 @@ +# +# Copyright (C) 2020 OpenWrt.org +# + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.0-eu|\ + tplink,tl-wpa8630p-v2.1-eu) + ucidef_set_compat_version "2.0" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata new file mode 100644 index 00000000000..8e3e142ec97 --- /dev/null +++ b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -0,0 +1,25 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions/caldata.sh + +board=$(board_name) + +case "$FIRMWARE" in +"ath10k/pre-cal-pci-0000:00:00.0.bin") + case $board in + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.0-eu|\ + tplink,tl-wpa8630p-v2.1-eu) + caldata_extract "art" 0x5000 0x2f20 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1) + ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ + /lib/firmware/ath10k/QCA9888/hw2.0/board.bin + ;; + esac + ;; +*) + exit 1 + ;; +esac