From: Roland Reinl Date: Sun, 1 Oct 2023 09:25:40 +0000 (+0200) Subject: mediatek: Add support for TP-Link EAP225v5 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=44cd32d764fe1daed3b6d0595530df0c4d1c3464;p=openwrt%2Fstaging%2F981213.git mediatek: Add support for TP-Link EAP225v5 Device specification: - MT7629 with 16MB NOR flash W25Q128 and 128 MB DDR3 RAM. - MT7761N and MT7762N wireless chips (currenlty no driver in OpenWrt available) - WiFi is NOT working on this device - Dual core but second CPU doesn't seem to work (Error message during boot: "CPU1: failed to come online") There are two similar merge requests for similar devices with the same issues: - https://github.com/openwrt/openwrt/pull/12286 - https://github.com/openwrt/openwrt/pull/5084 UART interface is next to the reset button, pinout: - 1: TX (the pin with the arrow marker) - 2: RX - 3: GND - 4: VCC UART settings: 115200,8n1, 3.3V U-Boot menu can be entered by pressing Ctrl+B during startup. Booting initramfs: - Set your computers IP adress to 192.168.1.110 - Run a TFTP server providing the initramfs image - Power on the AP, press Ctrl+B to get to the U-Boot menu - Select "1. System Load Linux to SDRAM via TFTP" - Update kernel file name, input server IP and input device IP (if they deviate from the defaults) - After booting, create a backup of all partitions, especially for kernel and root_fs. They are required for reverting back to stock firmware - The sysupgrade image can be flashed now MAC adresses: - LAN and 2.4GHz use the same MAC (the one printed on the device) - 5GHz WiFi MAC is LAN MAC + 1 GPIOs: - GPIO 21 is the reset pin (low active) - GPIO 55 is for the green LED (active high) - GPIO 56 is for the yellow/amber LED (active high) Signed-off-by: Roland Reinl --- diff --git a/target/linux/mediatek/dts/mt7629-tplink_eap225-v5.dts b/target/linux/mediatek/dts/mt7629-tplink_eap225-v5.dts new file mode 100644 index 0000000000..52e22541fa --- /dev/null +++ b/target/linux/mediatek/dts/mt7629-tplink_eap225-v5.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +#include +#include "mt7629.dtsi" + +/ { + model = "TP-Link EAP225 v5"; + compatible = "tplink,eap225-v5", "mediatek,mt7629"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_amber; + led-running = &led_status_green; + led-upgrade = &led_status_amber; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-override = "console=ttyS0,115200n8"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&pio 21 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: status_green { + label = "green:status"; + gpios = <&pio 55 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_status_amber: status_amber { + label = "amber:status"; + gpios = <&pio 56 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + pinctrl-1 = <&ephy_leds_pins>; + status = "okay"; + + mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&phy0>; + nvmem-cells = <&macaddr_factory_8>; + nvmem-cell-names = "mac-address"; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&qspi { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&qspi_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x00080000>; + read-only; + }; + + partition@80000 { + label = "Partition"; + reg = <0x00080000 0x00010000>; + read-only; + }; + + partition@90000 { + label = "Factory"; + reg = <0x00090000 0x00010000>; + compatible = "nvmem-cells"; + read-only; + + macaddr_factory_8: macaddr@8 { + reg = <0x8 0x6>; + }; + }; + + partition@A0000 { + label = "Radio"; + reg = <0x000A0000 0x00010000>; + read-only; + }; + + partition@B0000 { + label = "Extra"; + reg = <0x000B0000 0x00010000>; + read-only; + }; + + /* Vendor layout: kernel (0x000C0000 0x001A0000) - rootfs (0x00260000 0x00BE0000) */ + /* OpenWrt flash layout: combine kernel and rootfs from OEM layout */ + partition@C0000 { + label = "firmware"; + reg = <0x000C0000 0x00D80000>; + }; + + partition@E40000 { + label = "Config"; + reg = <0x00E40000 0x0001B0000>; + read-only; + }; + }; + }; +}; + +&pio { + eth_pins: eth-pins { + mux { + function = "eth"; + groups = "mdc_mdio"; + }; + }; + + ephy_leds_pins: ephy-leds-pins { + mux { + function = "led"; + groups = "ephy_leds"; + }; + }; + + qspi_pins: qspi-pins { + mux { + function = "flash"; + groups = "spi_nor"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0_txd_rxd" ; + }; + }; + + watchdog_pins: watchdog-pins { + mux { + function = "watchdog"; + groups = "watchdog"; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&watchdog { + pinctrl-names = "default"; + pinctrl-0 = <&watchdog_pins>; + status = "okay"; +}; diff --git a/target/linux/mediatek/image/mt7629.mk b/target/linux/mediatek/image/mt7629.mk index 33c557190f..9374228808 100644 --- a/target/linux/mediatek/image/mt7629.mk +++ b/target/linux/mediatek/image/mt7629.mk @@ -48,3 +48,12 @@ define Device/netgear_ex6250-v2 pad-rootfs | check-size | netgear-encrypted-factory endef TARGET_DEVICES += netgear_ex6250-v2 + +define Device/tplink_eap225-v5 + DEVICE_VENDOR := TP-Link + DEVICE_MODEL := EAP225 + DEVICE_VARIANT := v5 + DEVICE_DTS := mt7629-tplink_eap225-v5 + DEVICE_DTS_DIR := ../dts +endef +TARGET_DEVICES += tplink_eap225-v5 diff --git a/target/linux/mediatek/mt7629/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7629/base-files/etc/board.d/02_network index db931c8334..df042f8ad2 100644 --- a/target/linux/mediatek/mt7629/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/mt7629/base-files/etc/board.d/02_network @@ -16,7 +16,8 @@ mediatek_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "6@eth0" ;; - netgear,ex6250-v2) + netgear,ex6250-v2|\ + tplink,eap225-v5) ucidef_set_interface_lan "eth0" ;; esac