From: John Crispin Date: Thu, 12 Feb 2015 08:07:39 +0000 (+0000) Subject: ralink: make the mt7621 irq core with with the new CM api X-Git-Tag: reboot~4291 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=44b929fcdd6e739f1882f7a9905ad051d98840b3;p=openwrt%2Fstaging%2Fchunkeey.git ralink: make the mt7621 irq core with with the new CM api Signed-off-by: John Crispin SVN-Revision: 44418 --- diff --git a/target/linux/ramips/mt7621/config-default b/target/linux/ramips/mt7621/config-default index c71a847dcd..d95338d024 100644 --- a/target/linux/ramips/mt7621/config-default +++ b/target/linux/ramips/mt7621/config-default @@ -2,9 +2,11 @@ CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y CONFIG_ARCH_HAS_RESET_CONTROLLER=y +# CONFIG_ARCH_HAS_SG_CHAIN is not set CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_BOARD_SCACHE=y @@ -26,11 +28,13 @@ CONFIG_CPU_MIPS32_R2=y CONFIG_CPU_MIPSR2=y CONFIG_CPU_MIPSR2_IRQ_EI=y CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y CONFIG_CPU_R4K_CACHE_TLB=y CONFIG_CPU_R4K_FPU=y CONFIG_CPU_RMAP=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CPU_SUPPORTS_MSA=y CONFIG_CSRC_R4K=y CONFIG_DEBUG_PINCTRL=y CONFIG_DMA_NONCOHERENT=y @@ -44,7 +48,6 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_IO=y CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GPIOLIB=y @@ -55,12 +58,14 @@ CONFIG_GPIO_SYSFS=y CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y +CONFIG_HAS_IOPORT_MAP=y # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_HAVE_CLK=y CONFIG_HAVE_CONTEXT_TRACKING=y @@ -69,11 +74,11 @@ CONFIG_HAVE_DEBUG_KMEMLEAK=y CONFIG_HAVE_DEBUG_STACKOVERFLOW=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_HAVE_IDE=y CONFIG_HAVE_KVM=y @@ -95,19 +100,21 @@ CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_GIC=y CONFIG_IRQ_WORK=y +CONFIG_KERNFS=y +CONFIG_LIBFDT=y CONFIG_MDIO_BOARDINFO=y CONFIG_MIPS=y +CONFIG_MIPS_CM=y CONFIG_MIPS_CMP=y CONFIG_MIPS_CPU_SCACHE=y +CONFIG_MIPS_GIC_IPI=y # CONFIG_MIPS_HUGE_TLB_SUPPORT is not set CONFIG_MIPS_L1_CACHE_SHIFT=6 CONFIG_MIPS_L1_CACHE_SHIFT_6=y # CONFIG_MIPS_MACHINE is not set CONFIG_MIPS_MT=y -# CONFIG_MIPS_MT_DISABLED is not set CONFIG_MIPS_MT_FPAFF=y CONFIG_MIPS_MT_SMP=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_O32_FP64_SUPPORT is not set CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y # CONFIG_MIPS_VPE_LOADER is not set @@ -115,10 +122,10 @@ CONFIG_MODULES_USE_ELF_REL=y CONFIG_MT7621_WDT=y # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_M25P80=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_SPLIT_FIRMWARE=y CONFIG_MTD_SPLIT_SEAMA_FW=y +CONFIG_MTD_SPLIT_SUPPORT=y CONFIG_MTD_SPLIT_TRX_FW=y CONFIG_MTD_SPLIT_UIMAGE_FW=y CONFIG_NEED_DMA_MAP_STATE=y @@ -128,9 +135,11 @@ CONFIG_NET_RALINK_GSW_MT7620=y CONFIG_NET_RALINK_MDIO=y CONFIG_NET_RALINK_MT7620=y CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +# CONFIG_NO_IOPORT_MAP is not set CONFIG_NR_CPUS=4 CONFIG_OF=y CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_FLATTREE=y CONFIG_OF_GPIO=y @@ -146,16 +155,18 @@ CONFIG_PCI_DISABLE_COMMON_QUIRKS=y CONFIG_PCI_DOMAINS=y CONFIG_PERF_USE_VMALLOC=y CONFIG_PHYLIB=y -# CONFIG_PINCONF is not set +# CONFIG_PHY_RALINK_USB is not set CONFIG_PINCTRL=y CONFIG_PINCTRL_RT2880=y # CONFIG_PINCTRL_SINGLE is not set CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y +# CONFIG_POWER_RESET_GPIO_RESTART is not set +# CONFIG_POWER_RESET_LTC2952 is not set +# CONFIG_POWER_RESET_SYSCON is not set CONFIG_POWER_SUPPLY=y # CONFIG_PREEMPT_RCU is not set CONFIG_RALINK=y -CONFIG_RALINK_USBPHY=y # CONFIG_RALINK_WDT is not set CONFIG_RCU_STALL_COMMON=y CONFIG_RESET_CONTROLLER=y @@ -188,21 +199,16 @@ CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_MIPS16=y CONFIG_SYS_SUPPORTS_MIPS_CMP=y CONFIG_SYS_SUPPORTS_MULTITHREADING=y CONFIG_SYS_SUPPORTS_SCHED_SMT=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TREE_RCU=y -# CONFIG_USB_EHCI_HCD is not set -CONFIG_USB_MT7621_XHCI_PLATFORM=y -CONFIG_USB_PHY=y CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set -CONFIG_USB_XHCI_PLATFORM=y CONFIG_USE_OF=y CONFIG_WATCHDOG_CORE=y CONFIG_WEAK_ORDERING=y CONFIG_XPS=y CONFIG_ZONE_DMA_FLAG=0 -# CONFIG_MTK_MTD_NAND is not set diff --git a/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch b/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch index 699c71c866..0eebadb849 100644 --- a/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch +++ b/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch @@ -78,7 +78,7 @@ Signed-off-by: John Crispin +#endif --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S -@@ -51,6 +51,7 @@ SECTIONS +@@ -51,6 +51,7 @@ /* read-only */ _text = .; /* Text and read-only data */ .text : { @@ -88,7 +88,7 @@ Signed-off-by: John Crispin LOCK_TEXT --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig -@@ -7,6 +7,11 @@ config CLKEVT_RT3352 +@@ -7,6 +7,11 @@ select CLKSRC_OF select CLKSRC_MMIO @@ -100,7 +100,7 @@ Signed-off-by: John Crispin choice prompt "Ralink SoC selection" default SOC_RT305X -@@ -28,6 +33,15 @@ choice +@@ -28,6 +33,15 @@ config SOC_MT7620 bool "MT7620" @@ -116,7 +116,7 @@ Signed-off-by: John Crispin endchoice choice -@@ -59,6 +73,10 @@ choice +@@ -59,6 +73,10 @@ depends on SOC_MT7620 select BUILTIN_DTB @@ -154,7 +154,7 @@ Signed-off-by: John Crispin --- a/arch/mips/ralink/Platform +++ b/arch/mips/ralink/Platform -@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctr +@@ -27,3 +27,8 @@ # load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000 cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620 @@ -165,7 +165,7 @@ Signed-off-by: John Crispin +cflags-$(CONFIG_SOC_MT7621) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621 --- /dev/null +++ b/arch/mips/ralink/irq-gic.c -@@ -0,0 +1,271 @@ +@@ -0,0 +1,268 @@ +#include +#include +#include @@ -185,9 +185,9 @@ Signed-off-by: John Crispin +#include + +#include -+#include + +#include ++#define GIC_BASE_ADDR 0x1fbc0000 + +unsigned long _gcmp_base; +static int gic_resched_int_base = 56; @@ -241,7 +241,7 @@ Signed-off-by: John Crispin + gic_intr_map[i].pin = GIC_CPU_INT0; + gic_intr_map[i].polarity = GIC_POL_POS; + gic_intr_map[i].trigtype = GIC_TRIG_LEVEL; -+ gic_intr_map[i].flags = GIC_FLAG_IPI; ++ gic_intr_map[i].flags = 0; + } + +#if defined(CONFIG_MIPS_MT_SMP) @@ -388,11 +388,8 @@ Signed-off-by: John Crispin + if (!_gcmp_base) + panic("Failed to remap gcmp memory\n"); + -+ if ((GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) != gcmp.start) -+ panic("Failed to find gcmp core\n"); -+ + /* tell the gcmp where to find the gic */ -+ GCMPGCB(GICBA) = gic.start | GCMP_GCB_GICBA_EN_MSK; ++ write_gcr_gic_base(GIC_BASE_ADDR | CM_GCR_GIC_BASE_GICEN_MSK); + gic_present = 1; + if (cpu_has_vint) { + set_vi_handler(2, gic_irqdispatch); @@ -523,7 +520,7 @@ Signed-off-by: John Crispin +} --- /dev/null +++ b/arch/mips/ralink/mt7621.c -@@ -0,0 +1,183 @@ +@@ -0,0 +1,192 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -539,10 +536,11 @@ Signed-off-by: John Crispin +#include +#include +#include -+#include + +#include +#include ++#include ++#include +#include +#include + @@ -704,6 +702,34 @@ Signed-off-by: John Crispin + + rt2880_pinmux_data = mt7621_pinmux_data; + -+ if (register_cmp_smp_ops()) -+ panic("failed to register_vsmp_smp_ops()"); ++ /* Early detection of CMP support */ ++ mips_cm_probe(); ++ mips_cpc_probe(); ++ ++ if (!register_cps_smp_ops()) ++ return; ++ if (!register_cmp_smp_ops()) ++ return; ++ if (!register_vsmp_smp_ops()) ++ return; +} +--- a/arch/mips/kernel/mips-cm.c ++++ b/arch/mips/kernel/mips-cm.c +@@ -105,7 +105,7 @@ + write_gcr_base(base_reg); + + /* disable CM regions */ +- write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK); ++/* write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK); + write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); + write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK); + write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); +@@ -113,7 +113,7 @@ + write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); + write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK); + write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); +- ++*/ + /* probe for an L2-only sync region */ + mips_cm_probe_l2sync(); +