From: Felix Fietkau Date: Wed, 19 Nov 2014 20:18:01 +0000 (+0000) Subject: ar8216: use genphy_config_aneg also for PHY 0 X-Git-Tag: reboot~5291 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=43e3e88379e688de4c2165116722d99abaeeeffe;p=openwrt%2Fstaging%2Fchunkeey.git ar8216: use genphy_config_aneg also for PHY 0 Kernel 3.14 introduced a switch reset in phy_init_hw in drivers/net/phy causing BMCR_ANENABLE to get cleared. Due to the fact that ar8xxx_phy_config_aneg does nothing for PHY 0 autonegatiation support remains disabled. This can cause ports to operate at 10MBit/half-duplex only. Fix this by calling genphy_config_aneg for PHY 0 too as genphy_config_aneg sets BMCR_ANENABLE if it's not yet set. Fixes: ticket 17800 Signed-off-by: Heiner Kallweit SVN-Revision: 43332 --- diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index b2c87db09d..147d21b57a 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -2863,15 +2863,6 @@ ar8xxx_phy_read_status(struct phy_device *phydev) return ret; } -static int -ar8xxx_phy_config_aneg(struct phy_device *phydev) -{ - if (phydev->addr == 0) - return 0; - - return genphy_config_aneg(phydev); -} - static const u32 ar8xxx_phy_ids[] = { 0x004dd033, 0x004dd034, /* AR8327 */ @@ -3043,7 +3034,7 @@ static struct phy_driver ar8xxx_phy_driver = { .remove = ar8xxx_phy_remove, .detach = ar8xxx_phy_detach, .config_init = ar8xxx_phy_config_init, - .config_aneg = ar8xxx_phy_config_aneg, + .config_aneg = genphy_config_aneg, .read_status = ar8xxx_phy_read_status, .driver = { .owner = THIS_MODULE }, };