From: Charles Keepax Date: Thu, 6 Nov 2014 15:49:41 +0000 (+0000) Subject: asix: Do full reset during ax88772_bind X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=436c2a5036b6ffe813310df2cf327d3b69be0734;p=openwrt%2Fstaging%2Fblogic.git asix: Do full reset during ax88772_bind commit 3cc81d85ee01 ("asix: Don't reset PHY on if_up for ASIX 88772") causes the ethernet on Arndale to no longer function. This appears to be because the Arndale ethernet requires a full reset before it will function correctly, however simply reverting the above patch causes problems with ethtool settings getting reset. It seems the problem is that the ethernet is not properly reset during bind, and indeed the code in ax88772_bind that resets the device is a very small subset of the actual ax88772_reset function. This patch uses ax88772_reset in place of the existing reset code in ax88772_bind which removes some code duplication and fixes the ethernet on Arndale. It is still possible that the original patch causes some issues with suspend and resume but that seems like a separate issue and I haven't had a chance to test that yet. Signed-off-by: Charles Keepax Tested-by: Riku Voipio Signed-off-by: David S. Miller --- diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 2c05f6cdb12f..816d511e34d3 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -465,19 +465,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) return ret; } - ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL); - if (ret < 0) - return ret; - - msleep(150); - - ret = asix_sw_reset(dev, AX_SWRESET_CLEAR); - if (ret < 0) - return ret; - - msleep(150); - - ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE); + ax88772_reset(dev); /* Read PHYID register *AFTER* the PHY was reset properly */ phyid = asix_get_phyid(dev);