From: Lars-Peter Clausen <lars@metafoo.de>
Date: Sun, 29 Aug 2010 21:10:59 +0000 (+0000)
Subject: Use kirkwood_nand_init instead of manually registering the nand driver
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=429c8a56b6b9a1ada2d10d17488b29590232c579;p=openwrt%2Fstaging%2Frmilecki.git

Use kirkwood_nand_init instead of manually registering the nand driver

This fixes that the device would hang during boot.

SVN-Revision: 22837
---

diff --git a/target/linux/kirkwood/patches/100-dockstar.patch b/target/linux/kirkwood/patches/100-dockstar.patch
index f6ac90b7a8b..59334b4cda0 100644
--- a/target/linux/kirkwood/patches/100-dockstar.patch
+++ b/target/linux/kirkwood/patches/100-dockstar.patch
@@ -38,7 +38,7 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
  obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 --- /dev/null
 +++ b/arch/arm/mach-kirkwood/dockstar-setup.c
-@@ -0,0 +1,148 @@
+@@ -0,0 +1,121 @@
 +/*
 + * arch/arm/mach-kirkwood/dockstar-setup.c
 + *
@@ -61,7 +61,6 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
 +#include <asm/mach/arch.h>
 +#include <mach/kirkwood.h>
 +#include <plat/mvsdio.h>
-+#include <plat/orion_nand.h>
 +#include "common.h"
 +#include "mpp.h"
 +
@@ -81,7 +80,7 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
 +	}, {
 +		.name = "rootfs",
 +		.offset = MTDPART_OFS_NXTBLK,
-+		.size = SZ_64M,
++		.size = SZ_32M,
 +	}, {
 +		.name = "data",
 +		.offset = MTDPART_OFS_NXTBLK,
@@ -89,33 +88,6 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
 +	},
 +};
 +
-+static struct resource dockstar_nand_resource = {
-+	.flags		= IORESOURCE_MEM,
-+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-+			  KIRKWOOD_NAND_MEM_SIZE - 1,
-+};
-+
-+static struct orion_nand_data dockstar_nand_data = {
-+	.parts		= dockstar_nand_parts,
-+	.nr_parts	= ARRAY_SIZE(dockstar_nand_parts),
-+	.cle		= 0,
-+	.ale		= 1,
-+	.width		= 8,
-+	.chip_delay	= 25,
-+};
-+
-+static struct platform_device dockstar_nand_flash = {
-+	.name		= "orion_nand",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data	= &dockstar_nand_data,
-+	},
-+	.resource	= &dockstar_nand_resource,
-+	.num_resources	= 1,
-+};
-+
-+
 +static struct mv643xx_eth_platform_data dockstar_ge00_data = {
 +	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 +};
@@ -172,9 +144,10 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
 +		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
 +	kirkwood_ehci_init();
 +
++	kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
++
 +	kirkwood_ge00_init(&dockstar_ge00_data);
 +
-+	platform_device_register(&dockstar_nand_flash);
 +	platform_device_register(&dockstar_leds);
 +}
 +