From: Matt Redfearn Date: Fri, 31 Mar 2017 11:05:32 +0000 (+0100) Subject: irqchip/mips-gic: Fix Local compare interrupt X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=42969893b45a7a1864192f5634a8d2626e546a7b;p=openwrt%2Fstaging%2Fblogic.git irqchip/mips-gic: Fix Local compare interrupt Commit 4cfffcfa5106 ("irqchip/mips-gic: Fix local interrupts") added mapping of several local interrupts during initialisation of the gic driver. This associates virq numbers with these interrupts. Unfortunately, as not all of the interrupts are mapped in hardware order, when drivers subsequently request these interrupts they conflict with the mappings that have already been set up. For example, this manifests itself in the gic clocksource driver, which fails to probe with the message: clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x7350c9738, max_idle_ns: 440795203769 ns GIC timer IRQ 25 setup failed: -22 This is because virq 25 (the correct IRQ number specified via device tree) was allocated to the PERFCTR interrupt (and 24 to the timer, 26 to the FDC). To fix this, map all of these local interrupts in the hardware order so as to associate their virq numbers with the correct hw interrupts. Fixes: 4cfffcfa5106 ("irqchip/mips-gic: Fix local interrupts") Acked-by: Ralf Baechle Signed-off-by: Matt Redfearn Signed-off-by: Marc Zyngier --- diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 11d12bccc4e7..cd20df12d63d 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -991,8 +991,12 @@ static void __init gic_map_single_int(struct device_node *node, static void __init gic_map_interrupts(struct device_node *node) { + gic_map_single_int(node, GIC_LOCAL_INT_WD); + gic_map_single_int(node, GIC_LOCAL_INT_COMPARE); gic_map_single_int(node, GIC_LOCAL_INT_TIMER); gic_map_single_int(node, GIC_LOCAL_INT_PERFCTR); + gic_map_single_int(node, GIC_LOCAL_INT_SWINT0); + gic_map_single_int(node, GIC_LOCAL_INT_SWINT1); gic_map_single_int(node, GIC_LOCAL_INT_FDC); }