From: Pawel Dembicki Date: Fri, 17 Apr 2020 20:31:11 +0000 (+0200) Subject: ramips: add support for LB-Link BL-W1200 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=426fb8cf84ae19b0edc2ed06f7a595bc7b1ed212;p=openwrt%2Fstaging%2Frmilecki.git ramips: add support for LB-Link BL-W1200 The BL-W1200 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7612E) - 5x 10/100/1000 Mbps Ethernet (MT7530) - 2x external, non-detachable antennas (Wifi 2.4G/5G) - 1x USB 2.0 - UART (R2) on PCB (57600 8n1) - 9x LED (1 GPIO controlled), 1x button - u-Boot bootloader Known issues: - No status LED. Used WPS LED during boot/failsafe/sysupgrade. Installation: 1. Apply initramfs image via factory web-gui. 2. Install sysupgrade image. How to revert to OEM firmware: - sysupgrade -n -F stock_firmware.bin Reviewed-by: Sungbo Eo Signed-off-by: Pawel Dembicki --- diff --git a/target/linux/ramips/dts/mt7620a_lb-link_bl-w1200.dts b/target/linux/ramips/dts/mt7620a_lb-link_bl-w1200.dts new file mode 100644 index 00000000000..a55550d9699 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_lb-link_bl-w1200.dts @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "lb-link,bl-w1200", "ralink,mt7620a-soc"; + model = "LB-Link BL-W1200"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + led-upgrade = &led_wps; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + keys { + compatible = "gpio-keys"; + + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_wps: wps { + label = "bl-w1200:green:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "uartf", "spi refclk"; + function = "gpio"; + }; +}; + +ðernet { + status = "okay"; + + mtd-mac-address = <&factory 0x28>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins &mdio_pins>; + mediatek,portmap = "wllll"; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; + + ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + + ethernet-phy@2 { + reg = <2>; + phy-mode = "rgmii"; + }; + + ethernet-phy@3 { + reg = <3>; + phy-mode = "rgmii"; + }; + + ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + ethernet-phy@1f { + reg = <0x1f>; + phy-mode = "rgmii"; + }; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0x0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5000000 6000000>; + mediatek,mtd-eeprom = <&factory 0x8000>; + + led { + led-sources = <2>; + led-active-low; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 5e281f307d4..4f5341f06ee 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -579,6 +579,15 @@ define Device/lava_lr-25g001 endef TARGET_DEVICES += lava_lr-25g001 +define Device/lb-link_bl-w1200 + SOC := mt7620a + DEVICE_VENDOR := LB-Link + DEVICE_MODEL := BL-W1200 + IMAGE_SIZE := 7872k + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76x2 +endef +TARGET_DEVICES += lb-link_bl-w1200 + define Device/lenovo_newifi-y1 SOC := mt7620a IMAGE_SIZE := 16064k diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 8ae50b3df5a..3f306d85063 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -116,6 +116,7 @@ ramips_setup_interfaces() "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "6@eth0" ;; edimax,br-6478ac-v2|\ + lb-link,bl-w1200|\ tplink,archer-c2-v1) ucidef_add_switch "switch0" ucidef_add_switch_attr "switch0" "enable" "false" @@ -319,6 +320,10 @@ ramips_setup_macs() iptime,a104ns) wan_mac=$(macaddr_add "$(mtd_get_mac_binary u-boot 0x1fc20)" 2) ;; + lb-link,bl-w1200) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + label_mac=$wan_mac + ;; lenovo,newifi-y1|\ lenovo,newifi-y1s|\ ohyeah,oy-0001|\ diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches index f2355fdb978..959991598cd 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches @@ -22,6 +22,9 @@ head-weblink,hdrm200) ucidef_add_gpio_switch "io4" "I/O 4" "14" ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "21" "1" ;; +lb-link,bl-w1200) + ucidef_add_gpio_switch "eth_leds_enable" "ETH LEDs enable" "10" "1" + ;; zbtlink,zbt-we826-e) ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "13" ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "14" "1"