From: Linus Walleij Date: Mon, 20 May 2024 19:32:55 +0000 (+0200) Subject: ixp4xx: Add back support for Iomega NAS100D X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=4220f75d1ee212348f5b01e2e1878744e4ef8f7c;p=openwrt%2Fstaging%2Fansuel.git ixp4xx: Add back support for Iomega NAS100D OpenWrt supported the Iomega NAS100D in the past and it has 64 MB of RAM so if booted from a harddrive it will probably work just fine. The APEX boot loader already has a build variant for this machine that we can just pick up and use. This device has a single ethernet port so bring this online with DHCP as expected for a NAS device. Signed-off-by: Linus Walleij --- diff --git a/target/linux/ixp4xx/base-files/etc/board.d/02_network b/target/linux/ixp4xx/base-files/etc/board.d/02_network index 864328d6bc..96d7b31282 100644 --- a/target/linux/ixp4xx/base-files/etc/board.d/02_network +++ b/target/linux/ixp4xx/base-files/etc/board.d/02_network @@ -8,6 +8,7 @@ gateworks,gw2348|\ gateworks,gw2358) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; +iom,nas-100d|\ linksys,nslu2) ucidef_set_interface_lan "eth0" "dhcp" ;; diff --git a/target/linux/ixp4xx/image/Makefile b/target/linux/ixp4xx/image/Makefile index b532bcd914..14d74cfb70 100644 --- a/target/linux/ixp4xx/image/Makefile +++ b/target/linux/ixp4xx/image/Makefile @@ -60,6 +60,19 @@ define Device/gateworks_cambria endef TARGET_DEVICES += gateworks_cambria +define Device/iomega_nas100d + DEVICE_VENDOR := Iomega + DEVICE_MODEL := NAS100d + # USB2 is compiled in and needs no package + DEVICE_PACKAGES := ixp4xx-microcode-ethernet kmod-rtc-pcf8563 + DEVICE_DTS := intel-ixp42x-iomega-nas100d + KERNEL := kernel-bin | append-dtb + IMAGES := factory.bin + # This has to boot from harddisk so just append the kernel + IMAGE/factory.bin := append-kernel | linksys-ixp425-image "nas100d" +endef +TARGET_DEVICES += iomega_nas100d + define Device/linksys_nslu2 DEVICE_VENDOR := Linksys DEVICE_MODEL := NSLU2