From: Lars-Peter Clausen Date: Sat, 27 Sep 2008 17:09:35 +0000 (+0000) Subject: Update olpc target kernel to 2.26.5. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=41ac00278fc015c23b552f1dd49fa1811aa41afb;p=openwrt%2Fstaging%2Fjow.git Update olpc target kernel to 2.26.5. SVN-Revision: 12740 --- diff --git a/target/linux/olpc/Makefile b/target/linux/olpc/Makefile index 915d11acbd..733d613727 100644 --- a/target/linux/olpc/Makefile +++ b/target/linux/olpc/Makefile @@ -1,4 +1,4 @@ -# +# # Copyright (C) 2006 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. @@ -11,7 +11,7 @@ BOARD:=olpc BOARDNAME:=OLPC XO-1 FEATURES:=squashfs ext2 -LINUX_VERSION:=2.6.23.17 +LINUX_VERSION:=2.6.26.5 include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += kmod-natsemi kmod-ne2k-pci diff --git a/target/linux/olpc/config-2.6.23 b/target/linux/olpc/config-2.6.23 index e6e17080f7..e69de29bb2 100644 --- a/target/linux/olpc/config-2.6.23 +++ b/target/linux/olpc/config-2.6.23 @@ -1,586 +0,0 @@ -# CONFIG_60XX_WDT is not set -# CONFIG_8139TOO is not set -CONFIG_AC97_BUS=m -# CONFIG_ACPI is not set -# CONFIG_ACQUIRE_WDT is not set -# CONFIG_ADVANTECH_WDT is not set -# CONFIG_AGP is not set -# CONFIG_AIRO is not set -# CONFIG_ALIM1535_WDT is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_APM is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_ATM is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_BACKLIGHT_PROGEAR is not set -CONFIG_BASE_SMALL=0 -# CONFIG_BATTERY_DS2760 is not set -CONFIG_BATTERY_OLPC=y -# CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_MISC=y -CONFIG_BITREVERSE=y -CONFIG_BLK_DEV_GENERIC=m -CONFIG_BLK_DEV_IDE=m -CONFIG_BLK_DEV_IDEDISK=m -CONFIG_BLK_DEV_IDEDMA=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_SC1200=m -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_BLK_DEV_VIA82CXXX=m -# CONFIG_BONDING is not set -CONFIG_BOUNCE=y -# CONFIG_BRIDGE_NF_EBTABLES is not set -# CONFIG_BT is not set -CONFIG_CFG80211=m -CONFIG_CHR_DEV_SG=y -# CONFIG_CIFS is not set -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_COMPAT_VDSO=y -# CONFIG_CPU5_WDT is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_AES_586 is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_TWOFISH_586 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CS5535_GPIO is not set -# CONFIG_DCDBAS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DELL_RBU is not set -CONFIG_DEVPORT=y -# CONFIG_DISABLE_CONSOLE_SUSPEND is not set -CONFIG_DISPLAY_SUPPORT=y -CONFIG_DMI=y -CONFIG_DMIID=y -CONFIG_DNOTIFY=y -CONFIG_DOUBLEFAULT=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_E100 is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_EDAC is not set -# CONFIG_EDD is not set -# CONFIG_EEPROM_93CX6 is not set -CONFIG_ELF_CORE=y -# CONFIG_EUROTECH_WDT is not set -CONFIG_EXT2_FS=y -# CONFIG_EXT3_FS is not set -CONFIG_FB=y -# CONFIG_FB_3DFX is not set -# CONFIG_FB_ARC is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_BACKLIGHT is not set -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_GEODE=y -CONFIG_FB_GEODE_GX=y -# CONFIG_FB_GEODE_GX1 is not set -# CONFIG_FB_GEODE_GX_SET_FBSIZE is not set -CONFIG_FB_GEODE_LX=y -# CONFIG_FB_HECUBA is not set -# CONFIG_FB_HGA is not set -# CONFIG_FB_I810 is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_LE80578 is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_OLPC_DCON=y -# CONFIG_FB_PM2 is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VESA is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FIRMWARE_EDID is not set -CONFIG_FIX_EARLYCON_MEM=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x16=y -CONFIG_FONT_8x8=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GEODE_MFGPT_TIMER=y -# CONFIG_HAMRADIO is not set -# CONFIG_HANGCHECK_TIMER is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HERMES is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_HFS_FS is not set -CONFIG_HIBERNATION=y -CONFIG_HIBERNATION_UP_POSSIBLE=y -CONFIG_HID=y -CONFIG_HID_SUPPORT=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HOSTAP is not set -# CONFIG_HPET_TIMER is not set -CONFIG_HT_IRQ=y -# CONFIG_HUGETLBFS is not set -CONFIG_HW_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HW_RANDOM_AMD is not set -CONFIG_HW_RANDOM_GEODE=y -# CONFIG_HW_RANDOM_INTEL is not set -CONFIG_HW_RANDOM_VIA=y -CONFIG_I2C=y -# CONFIG_I2C_ALGOBIT is not set -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -# CONFIG_I6300ESB_WDT is not set -# CONFIG_I8K is not set -# CONFIG_IB700_WDT is not set -# CONFIG_IBMASR is not set -# CONFIG_IBM_ASM is not set -CONFIG_IDE=m -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_IDE_ARM is not set -CONFIG_IDE_GENERIC=m -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IEEE80211 is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -# CONFIG_INPUT_EVDEV is not set -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_MOUSE=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INSTRUMENTATION=y -# CONFIG_IPV6 is not set -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_MATCH_AH is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_IPP2P is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_TIME is not set -# CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_SET is not set -# CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_IMQ is not set -# CONFIG_IP_NF_TARGET_LOG is not set -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_REDIRECT is not set -# CONFIG_IP_NF_TARGET_TOS is not set -# CONFIG_IP_NF_TARGET_TTL is not set -# CONFIG_IP_NF_TARGET_ULOG is not set -# CONFIG_ISA is not set -CONFIG_ISA_DMA_API=y -# CONFIG_ISDN is not set -# CONFIG_ISO9660_FS is not set -# CONFIG_ITCO_WDT is not set -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_KALLSYMS=y -CONFIG_KEXEC=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -CONFIG_KMOD=y -# CONFIG_KPROBES is not set -CONFIG_KTIME_SCALAR=y -# CONFIG_KVM is not set -CONFIG_LCD_CLASS_DEVICE=y -# CONFIG_LEDS_ALIX is not set -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_LOGO is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586MMX is not set -# CONFIG_M586TSC is not set -# CONFIG_M686 is not set -# CONFIG_MACHZ_WDT is not set -# CONFIG_MACINTOSH_DRIVERS is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_MCA is not set -# CONFIG_MCORE2 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MGEODEGX1 is not set -CONFIG_MGEODE_LX=y -CONFIG_MICROCODE=y -CONFIG_MICROCODE_OLD_INTERFACE=y -# CONFIG_MINIX_FS is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_SDHCI=y -# CONFIG_MMC_TIFM_SD is not set -# CONFIG_MMC_UNSAFE_RESUME is not set -# CONFIG_MMC_WBSD is not set -CONFIG_MODVERSIONS=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_OLPC=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -# CONFIG_MSDOS_FS is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_BLOCK2MTD=y -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CHAR=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_CAFE=y -# CONFIG_MTD_NAND_CS553X is not set -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_OOPS=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_PCI=y -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_TS5500 is not set -# CONFIG_MTRR is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_MVIAC7 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -CONFIG_NETDEV_1000=y -# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set -# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set -# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_HELPER is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set -# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_KEY is not set -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_SCH_DSMARK is not set -# CONFIG_NET_SCH_ESFQ is not set -# CONFIG_NET_SCH_GRED is not set -# CONFIG_NET_SCH_HFSC is not set -# CONFIG_NET_SCH_HTB is not set -# CONFIG_NET_SCH_INGRESS is not set -# CONFIG_NET_SCH_RED is not set -# CONFIG_NET_SCH_SFQ is not set -# CONFIG_NET_SCH_TBF is not set -# CONFIG_NET_SCH_TEQL is not set -CONFIG_NET_VENDOR_3COM=y -# CONFIG_NFSD is not set -# CONFIG_NFS_FS is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set -# CONFIG_NF_CONNTRACK_H323 is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -# CONFIG_NF_CONNTRACK_RTSP is not set -# CONFIG_NF_CONNTRACK_SIP is not set -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_H323 is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_RTSP is not set -# CONFIG_NF_NAT_SIP is not set -# CONFIG_NF_NAT_SNMP_BASIC is not set -# CONFIG_NLS is not set -CONFIG_NOHIGHMEM=y -CONFIG_NR_QUICK=1 -CONFIG_NSC_GPIO=m -CONFIG_NVRAM=y -CONFIG_OLPC=y -CONFIG_OLPC_PM=y -CONFIG_OPEN_FIRMWARE=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PARAVIRT is not set -CONFIG_PC8736x_GPIO=m -# CONFIG_PC87413_WDT is not set -CONFIG_PCI=y -# CONFIG_PCIEPORTBUS is not set -# CONFIG_PCIPCWATCHDOG is not set -CONFIG_PCI_DIRECT=y -# CONFIG_PCI_GOANY is not set -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -# CONFIG_PCI_GOMMCONFIG is not set -CONFIG_PCI_GOOLPC=y -# CONFIG_PCI_MSI is not set -CONFIG_PCI_OLPC=y -# CONFIG_PDA_POWER is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -CONFIG_PHYSICAL_START=0x100000 -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_LEGACY=y -CONFIG_PM_SLEEP=y -CONFIG_PM_STD_PARTITION="" -# CONFIG_PM_TRACE is not set -# CONFIG_PM_VERBOSE is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PPP_MPPE is not set -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PRISM54 is not set -# CONFIG_PROMFS_FS is not set -CONFIG_QUICKLIST=y -CONFIG_REED_SOLOMON=y -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_RELAY=y -# CONFIG_RELOCATABLE is not set -CONFIG_RTC=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_SBC8360_WDT is not set -# CONFIG_SBC_EPX_C3_WATCHDOG is not set -# CONFIG_SC1200_WDT is not set -# CONFIG_SC520_WDT is not set -CONFIG_SCSI=y -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SCx200 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_SDIO_UART is not set -CONFIG_SEMAPHORE_SLEEPERS=y -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIO=y -# CONFIG_SERIO_CT82C710 is not set -CONFIG_SERIO_I8042=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SMP is not set -# CONFIG_SMSC37B787_WDT is not set -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_CS5530 is not set -CONFIG_SND_CS5535AUDIO=m -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SONYPI is not set -CONFIG_SPARSEMEM_STATIC=y -CONFIG_SUSPEND=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_TELCLOCK is not set -CONFIG_TICK_ONESHOT=y -# CONFIG_TOSHIBA is not set -# CONFIG_TUN is not set -# CONFIG_TYPHOON is not set -# CONFIG_UDF_FS is not set -CONFIG_UID16=y -CONFIG_USB=y -# CONFIG_USBPCWATCHDOG is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_SPLIT_ISO=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_R8A66597_HCD is not set -CONFIG_USB_STORAGE=y -# CONFIG_USB_SUSPEND is not set -CONFIG_USB_UHCI_HCD=y -# CONFIG_USER_NS is not set -# CONFIG_VFAT_FS is not set -CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 -# CONFIG_VGASTATE is not set -CONFIG_VGA_CONSOLE=y -# CONFIG_VGA_NOPROBE is not set -# CONFIG_VIA_RHINE is not set -CONFIG_VIDEO_SELECT=y -CONFIG_VIRTUALIZATION=y -CONFIG_VM86=y -# CONFIG_VMSPLIT_1G is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_2G_OPT is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_VORTEX is not set -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_WAFER_WDT is not set -CONFIG_X86=y -CONFIG_X86_32=y -# CONFIG_X86_BIGSMP is not set -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_BSWAP=y -CONFIG_X86_CMPXCHG=y -# CONFIG_X86_CPUID is not set -# CONFIG_X86_ELAN is not set -# CONFIG_X86_ES7000 is not set -CONFIG_X86_FIND_SMP_CONFIG=y -CONFIG_X86_GENERIC=y -# CONFIG_X86_GENERICARCH is not set -CONFIG_X86_INTEL_USERCOPY=y -CONFIG_X86_INVLPG=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_L1_CACHE_SHIFT=7 -CONFIG_X86_LOCAL_APIC=y -# CONFIG_X86_MCE is not set -CONFIG_X86_MINIMUM_CPU_FAMILY=4 -CONFIG_X86_MPPARSE=y -# CONFIG_X86_MSR is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_PAE is not set -CONFIG_X86_PC=y -CONFIG_X86_POPAD_OK=y -# CONFIG_X86_REBOOTFIXUPS is not set -# CONFIG_X86_SUMMIT is not set -CONFIG_X86_TSC=y -CONFIG_X86_UP_APIC=y -CONFIG_X86_UP_IOAPIC=y -CONFIG_X86_USE_3DNOW=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -# CONFIG_X86_VISWS is not set -# CONFIG_X86_VOYAGER is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_XADD=y -# CONFIG_XFS_FS is not set diff --git a/target/linux/olpc/config-2.6.26 b/target/linux/olpc/config-2.6.26 new file mode 100644 index 0000000000..63972953f6 --- /dev/null +++ b/target/linux/olpc/config-2.6.26 @@ -0,0 +1,725 @@ +CONFIG_4KSTACKS=y +# CONFIG_64BIT is not set +CONFIG_AC97_BUS=m +CONFIG_ACPI=y +CONFIG_ACPI_AC=y +# CONFIG_ACPI_ASUS is not set +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BLACKLIST_YEAR=0 +CONFIG_ACPI_BUTTON=y +# CONFIG_ACPI_CONTAINER is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_EC=y +CONFIG_ACPI_FAN=y +CONFIG_ACPI_POWER=y +CONFIG_ACPI_PROCESSOR=y +# CONFIG_ACPI_PROCFS is not set +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y +# CONFIG_ACPI_SBS is not set +CONFIG_ACPI_SLEEP=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_SYSTEM=y +CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_TOSHIBA is not set +# CONFIG_ACPI_WMI is not set +# CONFIG_AGP is not set +# CONFIG_AIRO is not set +# CONFIG_APM is not set +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_ARCH_HAS_CPU_RELAX=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ATM is not set +# CONFIG_ATMEL is not set +# CONFIG_AUDIT_ARCH is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_BACKLIGHT_PROGEAR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BATTERY_DS2760 is not set +CONFIG_BATTERY_OLPC=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y +CONFIG_BITREVERSE=y +# CONFIG_BLK_DEV is not set +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +# CONFIG_BONDING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +CONFIG_BOUNCE=y +# CONFIG_BT is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_CFG80211=y +CONFIG_CHR_DEV_SG=y +CONFIG_CLASSIC_RCU=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_COMPAT_VDSO=y +# CONFIG_CPA_DEBUG is not set +CONFIG_CPU_FREQ=y +# CONFIG_CPU_FREQ_DEBUG is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_IDLE is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_AES_586 is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_GF128MUL=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_SALSA20_586 is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CS5535_GPIO is not set +# CONFIG_DCDBAS is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_NX_TEST is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_RODATA is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +# CONFIG_DELL_RBU is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_DEVPORT=y +CONFIG_DISPLAY_SUPPORT=y +# CONFIG_DMADEVICES is not set +CONFIG_DMI=y +CONFIG_DMIID=y +CONFIG_DOUBLEFAULT=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EDAC is not set +# CONFIG_EDD is not set +# CONFIG_EFI is not set +CONFIG_ELF_CORE=y +CONFIG_EXT2_FS=y +# CONFIG_EXT3_FS is not set +CONFIG_FAST_CMPXCHG_LOCAL=y +# CONFIG_FAULT_INJECTION is not set +CONFIG_FB=y +# CONFIG_FB_3DFX is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_EFI is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_GEODE=y +# CONFIG_FB_GEODE_GX is not set +# CONFIG_FB_GEODE_GX1 is not set +CONFIG_FB_GEODE_LX=y +# CONFIG_FB_HGA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VESA is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FIX_EARLYCON_MEM=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x16=y +CONFIG_FONT_8x8=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FRAME_POINTER is not set +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +# CONFIG_GENERIC_CPU is not set +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_GENERIC_LOCKBREAK is not set +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_GEODE_MFGPT_TIMER=y +# CONFIG_HAMRADIO is not set +# CONFIG_HANGCHECK_TIMER is not set +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y +# CONFIG_HERMES is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HIBERNATION=y +CONFIG_HID=y +CONFIG_HID_SUPPORT=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +# CONFIG_HOSTAP is not set +# CONFIG_HPET is not set +CONFIG_HPET_EMULATE_RTC=y +CONFIG_HPET_TIMER=y +CONFIG_HT_IRQ=y +# CONFIG_HUGETLBFS is not set +CONFIG_HW_CONSOLE=y +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_AMD is not set +CONFIG_HW_RANDOM_GEODE=y +# CONFIG_HW_RANDOM_INTEL is not set +CONFIG_HW_RANDOM_VIA=y +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +# CONFIG_I8K is not set +# CONFIG_IDE is not set +# CONFIG_IEEE80211 is not set +# CONFIG_IFB is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_INPUT_MOUSE=y +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1200 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900 +# CONFIG_IOMMU_HELPER is not set +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IPV6 is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_IPP2P is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_TIME is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_SET is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +# CONFIG_ISA is not set +CONFIG_ISA_DMA_API=y +# CONFIG_ISCSI_IBFT_FIND is not set +# CONFIG_ISDN is not set +# CONFIG_ISO9660_FS is not set +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KEXEC=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KGDB is not set +CONFIG_KMOD=y +# CONFIG_KPROBES is not set +CONFIG_KTIME_SCALAR=y +# CONFIG_LATENCYTOP is not set +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LEDS_ALIX is not set +# CONFIG_LEDS_CLEVO_MAIL is not set +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_DEBUG=y +# CONFIG_LIBERTAS_SDIO is not set +CONFIG_LIBERTAS_USB=m +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCK_STAT is not set +# CONFIG_LOGO is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586MMX is not set +# CONFIG_M586TSC is not set +# CONFIG_M686 is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_MARKERS=y +# CONFIG_MATH_EMULATION is not set +# CONFIG_MCA is not set +# CONFIG_MCORE2 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +# CONFIG_MEFFICEON is not set +# CONFIG_MGEODEGX1 is not set +CONFIG_MGEODE_LX=y +CONFIG_MICROCODE=y +CONFIG_MICROCODE_OLD_INTERFACE=y +# CONFIG_MINIX_FS is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_RICOH_MMC is not set +CONFIG_MMC_SDHCI=y +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_UNSAFE_RESUME is not set +# CONFIG_MMC_WBSD is not set +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPSC is not set +# CONFIG_MSDOS_FS is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_BLOCK2MTD=y +# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_OOPS=m +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_PCI=y +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_TS5500 is not set +# CONFIG_MTRR is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set +# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_KEY is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_ESFQ is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_INGRESS is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_RTSP is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_H323 is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_RTSP is not set +# CONFIG_NF_NAT_SIP is not set +# CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NL80211=y +# CONFIG_NLS is not set +CONFIG_NOHIGHMEM=y +# CONFIG_NONPROMISC_DEVMEM is not set +CONFIG_NO_HZ=y +CONFIG_NSC_GPIO=m +CONFIG_NVRAM=y +# CONFIG_OCF_OCF is not set +CONFIG_OLPC=y +CONFIG_OPROFILE=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PARAVIRT_GUEST is not set +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PC8736x_GPIO=m +CONFIG_PCI=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set +CONFIG_PCI_DIRECT=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_GOANY is not set +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GODIRECT is not set +# CONFIG_PCI_GOMMCONFIG is not set +CONFIG_PCI_GOOLPC=y +CONFIG_PCI_OLPC=y +CONFIG_PCSPKR_PLATFORM=y +# CONFIG_PDA_POWER is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +CONFIG_PHYSICAL_START=0x100000 +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_SLEEP=y +CONFIG_PM_STD_PARTITION="" +# CONFIG_PM_TRACE_RTC is not set +# CONFIG_PM_VERBOSE is not set +CONFIG_PNP=y +CONFIG_PNPACPI=y +# CONFIG_PNP_DEBUG is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PPP is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PRISM54 is not set +CONFIG_PROFILING=y +# CONFIG_PROVE_LOCKING is not set +# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RELAY=y +# CONFIG_RELOCATABLE is not set +# CONFIG_RFKILL is not set +CONFIG_RTC=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SCHEDSTATS=y +CONFIG_SCHED_DEBUG=y +CONFIG_SCHED_HRTICK=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCSI=y +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SCx200 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_SDIO_UART is not set +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_PNP=y +CONFIG_SERIO=y +# CONFIG_SERIO_CT82C710 is not set +CONFIG_SERIO_I8042=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=y +CONFIG_SLAB=y +CONFIG_SLABINFO=y +# CONFIG_SLUB is not set +# CONFIG_SMP is not set +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 +CONFIG_SND_CS5535AUDIO=m +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCSP is not set +# CONFIG_SND_SIS7019 is not set +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SONYPI is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SSB_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_TELCLOCK is not set +CONFIG_THERMAL=y +CONFIG_TICK_ONESHOT=y +CONFIG_TIMER_STATS=y +# CONFIG_TOSHIBA is not set +# CONFIG_TUN is not set +# CONFIG_UDF_FS is not set +CONFIG_UID16=y +CONFIG_USB=y +# CONFIG_USB_ACM is not set +# CONFIG_USB_CATC is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_HID is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_SERIAL is not set +CONFIG_USB_STORAGE=y +CONFIG_USB_SUSPEND=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_USBNET is not set +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VFAT_FS is not set +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +# CONFIG_VGASTATE is not set +CONFIG_VGA_CONSOLE=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_CAFE_CCIC=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_CPIA2 is not set +CONFIG_VIDEO_MEDIA=m +CONFIG_VIDEO_OV7670=m +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_VIDEO_SELECT=y +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VM86=y +# CONFIG_VMSPLIT_1G is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_W1 is not set +# CONFIG_WATCHDOG is not set +CONFIG_X86=y +CONFIG_X86_32=y +# CONFIG_X86_64 is not set +# CONFIG_X86_ACPI_CPUFREQ is not set +# CONFIG_X86_BIGSMP is not set +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_BSWAP=y +CONFIG_X86_CMPXCHG=y +CONFIG_X86_CPU=y +# CONFIG_X86_CPUFREQ_NFORCE2 is not set +# CONFIG_X86_CPUID is not set +CONFIG_X86_DEBUGCTLMSR=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_X86_E_POWERSAVER is not set +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_GENERIC=y +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_GX_SUSPMOD is not set +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_INVLPG=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_LOCAL_APIC=y +# CONFIG_X86_LONGHAUL is not set +# CONFIG_X86_LONGRUN is not set +# CONFIG_X86_MCE is not set +CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_X86_MPPARSE=y +# CONFIG_X86_MSR is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_P4_CLOCKMOD is not set +# CONFIG_X86_PAE is not set +CONFIG_X86_PC=y +CONFIG_X86_PM_TIMER=y +CONFIG_X86_POPAD_OK=y +# CONFIG_X86_POWERNOW_K6 is not set +# CONFIG_X86_POWERNOW_K7 is not set +# CONFIG_X86_POWERNOW_K8 is not set +# CONFIG_X86_PTDUMP is not set +# CONFIG_X86_RDC321X is not set +# CONFIG_X86_REBOOTFIXUPS is not set +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +# CONFIG_X86_SPEEDSTEP_ICH is not set +# CONFIG_X86_SPEEDSTEP_LIB is not set +# CONFIG_X86_SPEEDSTEP_SMI is not set +# CONFIG_X86_SUMMIT is not set +CONFIG_X86_TSC=y +CONFIG_X86_UP_APIC=y +CONFIG_X86_UP_IOAPIC=y +CONFIG_X86_USE_3DNOW=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +# CONFIG_X86_VISWS is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_VSMP is not set +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_XADD=y +# CONFIG_XFS_FS is not set +# CONFIG_ZONE_DMA32 is not set diff --git a/target/linux/olpc/patches-2.6.23/100-olpc.patch b/target/linux/olpc/patches-2.6.23/100-olpc.patch new file mode 100644 index 0000000000..4607aeda68 --- /dev/null +++ b/target/linux/olpc/patches-2.6.23/100-olpc.patch @@ -0,0 +1,5880 @@ +Index: linux-2.6.23.17/arch/i386/Kconfig +=================================================================== +--- linux-2.6.23.17.orig/arch/i386/Kconfig ++++ linux-2.6.23.17/arch/i386/Kconfig +@@ -796,6 +796,15 @@ config SECCOMP + + If unsure, say Y. Only embedded should say N here. + ++config VGA_NOPROBE ++ bool "Don't probe VGA at boot" if EMBEDDED ++ default n ++ help ++ Saying Y here will cause the kernel to not probe VGA at boot time. ++ This will break everything that depends on the probed screen ++ data. Say N here unless you are absolutely sure this is what you ++ want. ++ + source kernel/Kconfig.hz + + config KEXEC +@@ -1120,6 +1129,9 @@ config PCI_GODIRECT + config PCI_GOANY + bool "Any" + ++config PCI_GOOLPC ++ bool "OLPC" ++ + endchoice + + config PCI_BIOS +@@ -1129,7 +1141,7 @@ config PCI_BIOS + + config PCI_DIRECT + bool +- depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS) ++ depends on PCI && ((PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS) + default y + + config PCI_MMCONFIG +@@ -1137,6 +1149,11 @@ config PCI_MMCONFIG + depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) + default y + ++config PCI_OLPC ++ bool ++ depends on PCI && PCI_GOOLPC ++ default y ++ + source "drivers/pci/pcie/Kconfig" + + source "drivers/pci/Kconfig" +@@ -1206,10 +1223,43 @@ config SCx200HR_TIMER + processor goes idle (as is done by the scheduler). The + other workaround is idle=poll boot option. + ++config GEODE_MFGPT_TIMER ++ bool "Geode Multi-Function General Purpose Timer (mfgpt) Support" ++ depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS ++ default y ++ help ++ This driver provides a clock event source based on the MFGPT ++ timer(s) in the CS5535 and CS5536 companion chip for the geode. ++ MFGPTs have a better resolution and max interval than the ++ generic PIT, and are suitable for use as high-res timers. ++ + config K8_NB + def_bool y + depends on AGP_AMD64 + ++config OLPC ++ bool "OLPC Support" ++ default n ++ help ++ Add support for detecting the unique features of the OLPC ++ Childrens Machine ++ ++config OLPC_PM ++ tristate "OLPC power management support" ++ default y ++ depends on OLPC ++ help ++ Add support for the Geode power management facilities on the ++ OLPC Childrens Machine ++ ++config OPEN_FIRMWARE ++ bool "Support for Open Firmware" ++ default y if OLPC ++ help ++ This option adds support for the implementation of Open Firmware ++ that is used on the OLPC Children's Machine. ++ If unsure, say N here. ++ + source "drivers/pcmcia/Kconfig" + + source "drivers/pci/hotplug/Kconfig" +Index: linux-2.6.23.17/arch/i386/kernel/Makefile +=================================================================== +--- linux-2.6.23.17.orig/arch/i386/kernel/Makefile ++++ linux-2.6.23.17/arch/i386/kernel/Makefile +@@ -39,13 +39,17 @@ obj-$(CONFIG_VM86) += vm86.o + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + obj-$(CONFIG_HPET_TIMER) += hpet.o + obj-$(CONFIG_K8_NB) += k8.o +-obj-$(CONFIG_MGEODE_LX) += geode.o ++obj-$(CONFIG_MGEODE_LX) += geode.o mfgpt.o + + obj-$(CONFIG_VMI) += vmi.o vmiclock.o + obj-$(CONFIG_PARAVIRT) += paravirt.o + obj-y += pcspeaker.o + + obj-$(CONFIG_SCx200) += scx200.o ++obj-$(CONFIG_OLPC) += olpc.o ++obj-$(CONFIG_OLPC_PM) += olpc-pm.o olpc-wakeup.o ++obj-$(CONFIG_OPEN_FIRMWARE) += ofw.o ++obj-$(CONFIG_PROMFS_FS) += prom.o + + # vsyscall.o contains the vsyscall DSO images as __initdata. + # We must build both images before we can assemble it. +Index: linux-2.6.23.17/arch/i386/kernel/geode.c +=================================================================== +--- linux-2.6.23.17.orig/arch/i386/kernel/geode.c ++++ linux-2.6.23.17/arch/i386/kernel/geode.c +@@ -145,10 +145,14 @@ EXPORT_SYMBOL_GPL(geode_gpio_setup_event + + static int __init geode_southbridge_init(void) + { ++ int timers; ++ + if (!is_geode()) + return -ENODEV; + + init_lbars(); ++ timers = geode_mfgpt_detect(); ++ printk(KERN_INFO "geode-mfgpt: %d timers available.\n", timers); + return 0; + } + +Index: linux-2.6.23.17/arch/i386/kernel/head.S +=================================================================== +--- linux-2.6.23.17.orig/arch/i386/kernel/head.S ++++ linux-2.6.23.17/arch/i386/kernel/head.S +@@ -117,8 +117,34 @@ ENTRY(startup_32) + movl $(COMMAND_LINE_SIZE/4),%ecx + rep + movsl ++ ++#ifdef CONFIG_OPEN_FIRMWARE ++/* ++ * If Open Firmware booted us, save the OFW client interface callback address ++ * and preserve the OFW page mappings by priming the kernel's new page ++ * directory area with a copy of the OFW page directory. That lets OFW stay ++ * resident in high memory (high in both the virtual and physical spaces) ++ * for at least long enough to copy out the device tree. ++ */ + 1: ++ movl $(boot_params - __PAGE_OFFSET + OFW_INFO_OFFSET), %ebp ++ cmpl $0x2057464F, (%ebp) /* Magic number "OFW " */ ++ jne 1f ++ ++ mov 0x8(%ebp), %eax /* Save callback address */ ++ mov %eax, call_firmware - __PAGE_OFFSET ++ ++ /* Copy the OFW pdir into swapper_pg_dir */ ++ movl %esi, %edx /* save %esi */ ++ movl $(swapper_pg_dir - __PAGE_OFFSET), %edi ++ movl %cr3, %esi /* Source is current pg_dir base address */ ++ movl $1024, %ecx /* Number of page directory entries */ ++ rep ++ movsl ++ movl %edx, %esi /* restore %esi */ ++#endif + ++1: + /* + * Initialize page tables. This creates a PDE and a set of page + * tables, which are located immediately beyond _end. The variable +@@ -129,6 +155,7 @@ ENTRY(startup_32) + * Warning: don't use %esi or the stack in this code. However, %esp + * can be used as a GPR if you really need it... + */ ++ + page_pde_offset = (__PAGE_OFFSET >> 20); + + movl $(pg0 - __PAGE_OFFSET), %edi +Index: linux-2.6.23.17/arch/i386/kernel/setup.c +=================================================================== +--- linux-2.6.23.17.orig/arch/i386/kernel/setup.c ++++ linux-2.6.23.17/arch/i386/kernel/setup.c +@@ -362,8 +362,10 @@ void __init zone_sizes_init(void) + { + unsigned long max_zone_pfns[MAX_NR_ZONES]; + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); ++#ifdef CONFIG_ZONE_DMA + max_zone_pfns[ZONE_DMA] = + virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; ++#endif + max_zone_pfns[ZONE_NORMAL] = max_low_pfn; + #ifdef CONFIG_HIGHMEM + max_zone_pfns[ZONE_HIGHMEM] = highend_pfn; +@@ -428,6 +430,9 @@ void __init setup_bootmem_allocator(void + */ + acpi_reserve_bootmem(); + #endif ++#ifdef CONFIG_OLPC_PM ++ reserve_bootmem(0xf0000, PAGE_SIZE); ++#endif + #ifdef CONFIG_X86_FIND_SMP_CONFIG + /* + * Find and reserve possible boot-time SMP configuration: +Index: linux-2.6.23.17/arch/i386/pci/Makefile +=================================================================== +--- linux-2.6.23.17.orig/arch/i386/pci/Makefile ++++ linux-2.6.23.17/arch/i386/pci/Makefile +@@ -3,6 +3,7 @@ obj-y := i386.o init.o + obj-$(CONFIG_PCI_BIOS) += pcbios.o + obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o + obj-$(CONFIG_PCI_DIRECT) += direct.o ++obj-$(CONFIG_PCI_OLPC) += olpc.o + + pci-y := fixup.o + pci-$(CONFIG_ACPI) += acpi.o +Index: linux-2.6.23.17/arch/i386/pci/init.c +=================================================================== +--- linux-2.6.23.17.orig/arch/i386/pci/init.c ++++ linux-2.6.23.17/arch/i386/pci/init.c +@@ -14,6 +14,9 @@ static __init int pci_access_init(void) + #ifdef CONFIG_PCI_MMCONFIG + pci_mmcfg_init(type); + #endif ++#ifdef CONFIG_PCI_OLPC ++ pci_olpc_init(); ++#endif + if (raw_pci_ops) + return 0; + #ifdef CONFIG_PCI_BIOS +Index: linux-2.6.23.17/arch/i386/pci/pci.h +=================================================================== +--- linux-2.6.23.17.orig/arch/i386/pci/pci.h ++++ linux-2.6.23.17/arch/i386/pci/pci.h +@@ -93,6 +93,7 @@ extern void pci_direct_init(int type); + extern void pci_pcbios_init(void); + extern void pci_mmcfg_init(int type); + extern void pcibios_sort(void); ++extern void pci_olpc_init(void); + + /* pci-mmconfig.c */ + +Index: linux-2.6.23.17/drivers/Makefile +=================================================================== +--- linux-2.6.23.17.orig/drivers/Makefile ++++ linux-2.6.23.17/drivers/Makefile +@@ -23,6 +23,8 @@ obj-y += char/ + + obj-$(CONFIG_CONNECTOR) += connector/ + ++obj-$(CONFIG_SYSPROF) += sysprof/ ++ + # i810fb and intelfb depend on char/agp/ + obj-$(CONFIG_FB_I810) += video/i810/ + obj-$(CONFIG_FB_INTEL) += video/intelfb/ +Index: linux-2.6.23.17/drivers/char/vt_ioctl.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/char/vt_ioctl.c ++++ linux-2.6.23.17/drivers/char/vt_ioctl.c +@@ -37,6 +37,9 @@ + char vt_dont_switch; + extern struct tty_driver *console_driver; + ++/* Add a notifier chain to inform drivers of a VT_TEXT/VT_GRAPHICS switch */ ++RAW_NOTIFIER_HEAD(console_notifier_list); ++ + #define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count) + #define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons) + +@@ -491,6 +494,14 @@ int vt_ioctl(struct tty_struct *tty, str + vc->vc_mode = (unsigned char) arg; + if (console != fg_console) + return 0; ++ ++ /* Notify listeners if the current fg_console has switched */ ++ ++ raw_notifier_call_chain(&console_notifier_list, ++ (arg == KD_TEXT) ? ++ CONSOLE_EVENT_SWITCH_TEXT : ++ CONSOLE_EVENT_SWITCH_GRAPHICS, 0); ++ + /* + * explicitly blank/unblank the screen if switching modes + */ +Index: linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/i2c/busses/scx200_acb.c ++++ linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c +@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820, + module_param_array(base, int, NULL, 0); + MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers"); + ++static unsigned int smbclk = 0x70; ++module_param(smbclk, uint, 0); ++MODULE_PARM_DESC(smbclk, "Specify the SMB_CLK value"); ++ + #define POLL_TIMEOUT (HZ/5) + + enum scx200_acb_state { +@@ -108,6 +112,7 @@ struct scx200_acb_iface { + #define ACBADDR (iface->base + 4) + #define ACBCTL2 (iface->base + 5) + #define ACBCTL2_ENABLE 0x01 ++#define ACBCTL3 (iface->base + 6) + + /************************************************************************/ + +@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struc + { + u8 val; + +- /* Disable the ACCESS.bus device and Configure the SCL +- frequency: 16 clock cycles */ +- outb(0x70, ACBCTL2); ++ /* Disable the ACCESS.bus device and Configure the SCL */ ++ ++ outb((smbclk & 0x7F) << 1, ACBCTL2); ++ ++ outb((smbclk >> 7) & 0xFF, ACBCTL3); + +- if (inb(ACBCTL2) != 0x70) { ++ if (inb(ACBCTL2) != ((smbclk & 0x7F) << 1)) { + pr_debug(NAME ": ACBCTL2 readback failed\n"); + return -ENXIO; + } +Index: linux-2.6.23.17/drivers/input/keyboard/atkbd.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/input/keyboard/atkbd.c ++++ linux-2.6.23.17/drivers/input/keyboard/atkbd.c +@@ -63,12 +63,25 @@ static int atkbd_extra; + module_param_named(extra, atkbd_extra, bool, 0); + MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); + ++#define ATKBD_KEY_UNKNOWN 0 ++#define ATKBD_KEY_NULL 0xFF0000FF ++ ++#define ATKBD_SCR_1 0xFF0000FE ++#define ATKBD_SCR_2 0xFF0000FD ++#define ATKBD_SCR_4 0xFF0000FC ++#define ATKBD_SCR_8 0xFF0000FB ++#define ATKBD_SCR_CLICK 0xFF0000FA ++#define ATKBD_SCR_LEFT 0xFF0000F9 ++#define ATKBD_SCR_RIGHT 0xFF0000F8 ++ ++#define ATKBD_SPECIAL 0xFF0000F8 ++ + /* + * Scancode to keycode tables. These are just the default setting, and + * are loadable via an userland utility. + */ + +-static unsigned char atkbd_set2_keycode[512] = { ++static unsigned int atkbd_set2_keycode[512] = { + + #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES + +@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[ + 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99, + + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +- 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125, ++ ++ 217,100,ATKBD_KEY_NULL, 0, 97,165, 0, 0, ++ 156, 0, 0, 0, 0, 0, 0,125, ++ + 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127, + 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142, + 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0, +- 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0, ++ ++ 226, 0, 0, 0, 0, 0, 0, 0, ++ 0,ATKBD_KEY_NULL, 96, 0, 0, 0,143, 0, ++ + 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112, + 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0, + +@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table + #define ATKBD_RET_HANGEUL 0xf2 + #define ATKBD_RET_ERR 0xff + +-#define ATKBD_KEY_UNKNOWN 0 +-#define ATKBD_KEY_NULL 255 +- +-#define ATKBD_SCR_1 254 +-#define ATKBD_SCR_2 253 +-#define ATKBD_SCR_4 252 +-#define ATKBD_SCR_8 251 +-#define ATKBD_SCR_CLICK 250 +-#define ATKBD_SCR_LEFT 249 +-#define ATKBD_SCR_RIGHT 248 +- +-#define ATKBD_SPECIAL 248 +- + #define ATKBD_LED_EVENT_BIT 0 + #define ATKBD_REP_EVENT_BIT 1 + +@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table + #define ATKBD_XL_HANJA 0x20 + + static struct { +- unsigned char keycode; ++ unsigned int keycode; + unsigned char set2; + } atkbd_scroll_keys[] = { + { ATKBD_SCR_1, 0xc5 }, +@@ -200,7 +206,7 @@ struct atkbd { + char phys[32]; + + unsigned short id; +- unsigned char keycode[512]; ++ unsigned int keycode[512]; + unsigned char set; + unsigned char translated; + unsigned char extra; +@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struc + unsigned int code = data; + int scroll = 0, hscroll = 0, click = -1, add_release_event = 0; + int value; +- unsigned char keycode; ++ unsigned int keycode; + + #ifdef ATKBD_DEBUG + printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags); +@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(stru + atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode; + } + } else if (atkbd->set == 3) { +- memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode)); ++ for (i = 0; i < ARRAY_SIZE(atkbd_set3_keycode); i++) ++ atkbd->keycode[i] = atkbd_set3_keycode[i]; + } else { +- memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode)); ++ for (i = 0; i < ARRAY_SIZE(atkbd_set2_keycode); i++) ++ atkbd->keycode[i] = atkbd_set2_keycode[i]; + + if (atkbd->scroll) + for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) +@@ -925,8 +933,8 @@ static void atkbd_set_device_attrs(struc + } + + input_dev->keycode = atkbd->keycode; +- input_dev->keycodesize = sizeof(unsigned char); +- input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); ++ input_dev->keycodesize = sizeof(unsigned int); ++ input_dev->keycodemax = ARRAY_SIZE(atkbd->keycode); + + for (i = 0; i < 512; i++) + if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL) +@@ -1017,6 +1025,10 @@ static int atkbd_connect(struct serio *s + return err; + } + ++#ifdef CONFIG_OLPC ++#include ++#endif ++ + /* + * atkbd_reconnect() tries to restore keyboard into a sane state and is + * most likely called on resume. +@@ -1027,6 +1039,12 @@ static int atkbd_reconnect(struct serio + struct atkbd *atkbd = serio_get_drvdata(serio); + struct serio_driver *drv = serio->drv; + ++#ifdef CONFIG_OLPC ++ if (olpc_rev_after(OLPC_REV_B2)) ++ if (serio->dev.power.power_state.event != PM_EVENT_ON) ++ return 0; ++#endif ++ + if (!atkbd || !drv) { + printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n"); + return -1; +Index: linux-2.6.23.17/drivers/input/mouse/Kconfig +=================================================================== +--- linux-2.6.23.17.orig/drivers/input/mouse/Kconfig ++++ linux-2.6.23.17/drivers/input/mouse/Kconfig +@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT + + If unsure, say N. + ++config MOUSE_PS2_OLPC ++ bool "OLPC PS/2 mouse protocol extension" if EMBEDDED ++ default n ++ depends on MOUSE_PS2 && OLPC ++ ---help--- ++ Say Y here if you have an OLPC PS/2 touchpad connected to ++ your system. ++ ++ If unsure, say N. ++ + config MOUSE_SERIAL + tristate "Serial mouse" + select SERIO +Index: linux-2.6.23.17/drivers/input/mouse/Makefile +=================================================================== +--- linux-2.6.23.17.orig/drivers/input/mouse/Makefile ++++ linux-2.6.23.17/drivers/input/mouse/Makefile +@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += + psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o + psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o + psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o ++psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o +Index: linux-2.6.23.17/drivers/input/mouse/psmouse-base.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/input/mouse/psmouse-base.c ++++ linux-2.6.23.17/drivers/input/mouse/psmouse-base.c +@@ -26,6 +26,7 @@ + #include "synaptics.h" + #include "logips2pp.h" + #include "alps.h" ++#include "olpc.h" + #include "lifebook.h" + #include "trackpoint.h" + #include "touchkit_ps2.h" +@@ -103,7 +104,7 @@ static struct attribute_group psmouse_at + */ + static DEFINE_MUTEX(psmouse_mutex); + +-static struct workqueue_struct *kpsmoused_wq; ++struct workqueue_struct *kpsmoused_wq; + + struct psmouse_protocol { + enum psmouse_type type; +@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(str + goto out; + } + +- if (psmouse->packet[1] == PSMOUSE_RET_ID) { ++ if (psmouse->packet[1] == PSMOUSE_RET_ID || psmouse->packet[1] == PSMOUSE_RET_BAT) { + __psmouse_set_state(psmouse, PSMOUSE_IGNORE); + serio_reconnect(serio); + goto out; +@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psm + } + } + ++/* ++ * Try OLPC touchpad. ++ */ + if (max_proto > PSMOUSE_IMEX) { ++ if (olpc_detect(psmouse, set_properties) == 0) { ++ if (!set_properties || olpc_init(psmouse) == 0) ++ return PSMOUSE_OLPC; ++/* ++ * Init failed, try basic relative protocols ++ */ ++ max_proto = PSMOUSE_IMEX; ++ } ++ } + ++ if (max_proto > PSMOUSE_IMEX) { + if (genius_detect(psmouse, set_properties) == 0) + return PSMOUSE_GENPS; + +@@ -762,6 +776,14 @@ static const struct psmouse_protocol psm + .detect = touchkit_ps2_detect, + }, + #endif ++#ifdef CONFIG_MOUSE_PS2_OLPC ++ { ++ .type = PSMOUSE_OLPC, ++ .name = "OLPC", ++ .alias = "olpc", ++ .detect = olpc_detect, ++ }, ++#endif + { + .type = PSMOUSE_CORTRON, + .name = "CortronPS/2", +Index: linux-2.6.23.17/drivers/input/mouse/psmouse.h +=================================================================== +--- linux-2.6.23.17.orig/drivers/input/mouse/psmouse.h ++++ linux-2.6.23.17/drivers/input/mouse/psmouse.h +@@ -89,6 +89,7 @@ enum psmouse_type { + PSMOUSE_TRACKPOINT, + PSMOUSE_TOUCHKIT_PS2, + PSMOUSE_CORTRON, ++ PSMOUSE_OLPC, + PSMOUSE_AUTO /* This one should always be last */ + }; + +@@ -96,6 +97,7 @@ int psmouse_sliced_command(struct psmous + int psmouse_reset(struct psmouse *psmouse); + void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution); + ++extern struct workqueue_struct *kpsmoused_wq; + + struct psmouse_attribute { + struct device_attribute dattr; +Index: linux-2.6.23.17/drivers/input/serio/i8042.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/input/serio/i8042.c ++++ linux-2.6.23.17/drivers/input/serio/i8042.c +@@ -868,6 +868,11 @@ static long i8042_panic_blink(long count + #undef DELAY + + #ifdef CONFIG_PM ++ ++#ifdef CONFIG_OLPC ++#include ++#endif ++ + /* + * Here we try to restore the original BIOS settings. We only want to + * do that once, when we really suspend, not when we taking memory +@@ -878,8 +883,15 @@ static long i8042_panic_blink(long count + static int i8042_suspend(struct platform_device *dev, pm_message_t state) + { + if (dev->dev.power.power_state.event != state.event) { ++#ifdef CONFIG_OLPC ++ /* Anything newer than B2 remains powered; no reset needed */ ++ if (olpc_rev_before(OLPC_REV_PRE_B3)) { ++#endif + if (state.event == PM_EVENT_SUSPEND) + i8042_controller_reset(); ++#ifdef CONFIG_OLPC ++ } ++#endif + + dev->dev.power.power_state = state; + } +@@ -902,9 +914,15 @@ static int i8042_resume(struct platform_ + if (dev->dev.power.power_state.event == PM_EVENT_ON) + return 0; + ++#ifdef CONFIG_OLPC ++ if (olpc_rev_before(OLPC_REV_PRE_B3)) { ++#endif + error = i8042_controller_check(); + if (error) + return error; ++#ifdef CONFIG_OLPC ++ } ++#endif + + error = i8042_controller_selftest(); + if (error) +Index: linux-2.6.23.17/drivers/input/serio/serio.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/input/serio/serio.c ++++ linux-2.6.23.17/drivers/input/serio/serio.c +@@ -916,11 +916,22 @@ static int serio_uevent(struct device *d + #endif /* CONFIG_HOTPLUG */ + + #ifdef CONFIG_PM ++ ++#ifdef CONFIG_OLPC ++#include ++#endif ++ + static int serio_suspend(struct device *dev, pm_message_t state) + { + if (dev->power.power_state.event != state.event) { ++#ifdef CONFIG_OLPC ++ if (olpc_rev_before(OLPC_REV_PRE_B3)) { ++#endif + if (state.event == PM_EVENT_SUSPEND) + serio_cleanup(to_serio_port(dev)); ++#ifdef CONFIG_OLPC ++ } ++#endif + + dev->power.power_state = state; + } +Index: linux-2.6.23.17/drivers/media/video/cafe_ccic.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/media/video/cafe_ccic.c ++++ linux-2.6.23.17/drivers/media/video/cafe_ccic.c +@@ -63,13 +63,13 @@ MODULE_SUPPORTED_DEVICE("Video"); + */ + + #define MAX_DMA_BUFS 3 +-static int alloc_bufs_at_load = 0; +-module_param(alloc_bufs_at_load, bool, 0444); +-MODULE_PARM_DESC(alloc_bufs_at_load, +- "Non-zero value causes DMA buffers to be allocated at module " +- "load time. This increases the chances of successfully getting " +- "those buffers, but at the cost of nailing down the memory from " +- "the outset."); ++static int alloc_bufs_at_read = 0; ++module_param(alloc_bufs_at_read, bool, 0444); ++MODULE_PARM_DESC(alloc_bufs_at_read, ++ "Non-zero value causes DMA buffers to be allocated when the " ++ "video capture device is read, rather than at module load " ++ "time. This saves memory, but decreases the chances of " ++ "successfully getting those buffers."); + + static int n_dma_bufs = 3; + module_param(n_dma_bufs, uint, 0644); +@@ -370,6 +370,10 @@ static int cafe_smbus_write_data(struct + rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + cafe_reg_write(cam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&cam->dev_lock, flags); ++ mdelay(2); /* It'll probably take about 900µs anyway, and the ++ CAFÉ is apparently quite sensitive to being poked ++ at this point. If we can work out precisely what's ++ going on and reduce this delay, it would be nice. */ + + /* + * Time to wait for the write to complete. THIS IS A RACY +@@ -1503,7 +1507,7 @@ static int cafe_v4l_release(struct inode + } + if (cam->users == 0) { + cafe_ctlr_power_down(cam); +- if (! alloc_bufs_at_load) ++ if (alloc_bufs_at_read) + cafe_free_dma_bufs(cam); + } + mutex_unlock(&cam->s_mutex); +@@ -2162,7 +2166,7 @@ static int cafe_pci_probe(struct pci_dev + /* + * If so requested, try to get our DMA buffers now. + */ +- if (alloc_bufs_at_load) { ++ if (!alloc_bufs_at_read) { + if (cafe_alloc_dma_bufs(cam, 1)) + cam_warn(cam, "Unable to alloc DMA buffers at load" + " will try again later."); +Index: linux-2.6.23.17/drivers/misc/Kconfig +=================================================================== +--- linux-2.6.23.17.orig/drivers/misc/Kconfig ++++ linux-2.6.23.17/drivers/misc/Kconfig +@@ -202,5 +202,10 @@ config THINKPAD_ACPI_BAY + + If you are not sure, say Y here. + ++config EEPROM_93CX6 ++ tristate "EEPROM 93CX6 support" ++ ---help--- ++ This is a driver for the EEPROM chipsets 93c46 and 93c66. ++ The driver supports both read as well as write commands. + + endif # MISC_DEVICES +Index: linux-2.6.23.17/drivers/mmc/host/sdhci.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mmc/host/sdhci.c ++++ linux-2.6.23.17/drivers/mmc/host/sdhci.c +@@ -411,6 +411,12 @@ static void sdhci_prepare_data(struct sd + break; + } + ++ /* ++ * There's an off-by-one error in the hw that we need to ++ * compensate for. ++ */ ++ count++; ++ + if (count >= 0xF) { + printk(KERN_WARNING "%s: Too large timeout requested!\n", + mmc_hostname(host->mmc)); +@@ -676,19 +682,17 @@ static void sdhci_set_power(struct sdhci + if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) + writeb(0, host->ioaddr + SDHCI_POWER_CONTROL); + +- pwr = SDHCI_POWER_ON; +- + switch (1 << power) { + case MMC_VDD_165_195: +- pwr |= SDHCI_POWER_180; ++ pwr = SDHCI_POWER_180; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: +- pwr |= SDHCI_POWER_300; ++ pwr = SDHCI_POWER_300; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: +- pwr |= SDHCI_POWER_330; ++ pwr = SDHCI_POWER_330; + break; + default: + BUG(); +@@ -696,6 +700,10 @@ static void sdhci_set_power(struct sdhci + + writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); + ++ pwr |= SDHCI_POWER_ON; ++ ++ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); ++ + out: + host->power = power; + } +Index: linux-2.6.23.17/drivers/mtd/Kconfig +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/Kconfig ++++ linux-2.6.23.17/drivers/mtd/Kconfig +@@ -288,6 +288,14 @@ config SSFDC + This enables read only access to SmartMedia formatted NAND + flash. You can mount it with FAT file system. + ++config MTD_OOPS ++ tristate "Log panic/oops to an MTD buffer" ++ depends on MTD ++ help ++ This enables panic and oops messages to be logged to a circular ++ buffer in a flash partition where it can be read back at some ++ later point. ++ + source "drivers/mtd/chips/Kconfig" + + source "drivers/mtd/maps/Kconfig" +Index: linux-2.6.23.17/drivers/mtd/Makefile +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/Makefile ++++ linux-2.6.23.17/drivers/mtd/Makefile +@@ -22,6 +22,7 @@ obj-$(CONFIG_NFTL) += nftl.o + obj-$(CONFIG_INFTL) += inftl.o + obj-$(CONFIG_RFD_FTL) += rfd_ftl.o + obj-$(CONFIG_SSFDC) += ssfdc.o ++obj-$(CONFIG_MTD_OOPS) += mtdoops.o + + nftl-objs := nftlcore.o nftlmount.o + inftl-objs := inftlcore.o inftlmount.o +Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0001.c ++++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c +@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup( + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + + /* +- * Probing of multi-partition flash ships. ++ * Probing of multi-partition flash chips. + * + * To support multiple partitions when available, we simply arrange + * for each of them to have their own flchip structure even if they +@@ -1781,7 +1781,7 @@ static int __xipram do_erase_oneblock(st + return ret; + } + +-int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) ++static int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) + { + unsigned long ofs, len; + int ret; +@@ -1931,7 +1931,7 @@ static int cfi_intelext_lock(struct mtd_ + printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n", + __FUNCTION__, ofs, len); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, +- ofs, len, 0); ++ ofs, len, NULL); + #endif + + ret = cfi_varsize_frob(mtd, do_xxlock_oneblock, +@@ -1941,7 +1941,7 @@ static int cfi_intelext_lock(struct mtd_ + printk(KERN_DEBUG "%s: lock status after, ret=%d\n", + __FUNCTION__, ret); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, +- ofs, len, 0); ++ ofs, len, NULL); + #endif + + return ret; +@@ -1955,7 +1955,7 @@ static int cfi_intelext_unlock(struct mt + printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n", + __FUNCTION__, ofs, len); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, +- ofs, len, 0); ++ ofs, len, NULL); + #endif + + ret = cfi_varsize_frob(mtd, do_xxlock_oneblock, +@@ -1965,7 +1965,7 @@ static int cfi_intelext_unlock(struct mt + printk(KERN_DEBUG "%s: lock status after, ret=%d\n", + __FUNCTION__, ret); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, +- ofs, len, 0); ++ ofs, len, NULL); + #endif + + return ret; +@@ -2256,7 +2256,7 @@ static void cfi_intelext_save_locks(stru + adr = region->offset + block * len; + + status = cfi_varsize_frob(mtd, +- do_getlockstatus_oneblock, adr, len, 0); ++ do_getlockstatus_oneblock, adr, len, NULL); + if (status) + set_bit(block, region->lockmap); + else +Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0002.c ++++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -1617,7 +1617,7 @@ static int __xipram do_erase_oneblock(st + } + + +-int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) ++static int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) + { + unsigned long ofs, len; + int ret; +Index: linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/chips/jedec_probe.c ++++ linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c +@@ -70,6 +70,7 @@ + + /* Fujitsu */ + #define MBM29F040C 0x00A4 ++#define MBM29F800BA 0x2258 + #define MBM29LV650UE 0x22D7 + #define MBM29LV320TE 0x22F6 + #define MBM29LV320BE 0x22F9 +@@ -129,6 +130,7 @@ + #define LH28F640BF 0x00b0 + + /* ST - www.st.com */ ++#define M29F800AB 0x0058 + #define M29W800DT 0x00D7 + #define M29W800DB 0x005B + #define M29W160DT 0x22C4 +@@ -646,6 +648,23 @@ static const struct amd_flash_info jedec + } + }, { + .mfr_id = MANUFACTURER_FUJITSU, ++ .dev_id = MBM29F800BA, ++ .name = "Fujitsu MBM29F800BA", ++ .uaddr = { ++ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */ ++ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */ ++ }, ++ .DevSize = SIZE_1MiB, ++ .CmdSet = P_ID_AMD_STD, ++ .NumEraseRegions= 4, ++ .regions = { ++ ERASEINFO(0x04000,1), ++ ERASEINFO(0x02000,2), ++ ERASEINFO(0x08000,1), ++ ERASEINFO(0x10000,15), ++ } ++ }, { ++ .mfr_id = MANUFACTURER_FUJITSU, + .dev_id = MBM29LV650UE, + .name = "Fujitsu MBM29LV650UE", + .uaddr = { +@@ -1510,6 +1529,23 @@ static const struct amd_flash_info jedec + ERASEINFO(0x1000,256) + } + ++ }, { ++ .mfr_id = MANUFACTURER_ST, ++ .dev_id = M29F800AB, ++ .name = "ST M29F800AB", ++ .uaddr = { ++ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */ ++ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */ ++ }, ++ .DevSize = SIZE_1MiB, ++ .CmdSet = P_ID_AMD_STD, ++ .NumEraseRegions= 4, ++ .regions = { ++ ERASEINFO(0x04000,1), ++ ERASEINFO(0x02000,2), ++ ERASEINFO(0x08000,1), ++ ERASEINFO(0x10000,15), ++ } + }, { + .mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */ + .dev_id = M29W800DT, +Index: linux-2.6.23.17/drivers/mtd/devices/Kconfig +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/devices/Kconfig ++++ linux-2.6.23.17/drivers/mtd/devices/Kconfig +@@ -69,12 +69,21 @@ config MTD_DATAFLASH26 + If you have such a board and such a DataFlash, say 'Y'. + + config MTD_M25P80 +- tristate "Support for M25 SPI Flash" ++ tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" + depends on SPI_MASTER && EXPERIMENTAL + help +- This enables access to ST M25P80 and similar SPI flash chips, +- used for program and data storage. Set up your spi devices +- with the right board-specific platform data. ++ This enables access to most modern SPI flash chips, used for ++ program and data storage. Series supported include Atmel AT26DF, ++ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips ++ are supported as well. See the driver source for the current list, ++ or to add other chips. ++ ++ Note that the original DataFlash chips (AT45 series, not AT26DF), ++ need an entirely different driver. ++ ++ Set up your spi devices with the right board-specific platform data, ++ if you want to specify device partitioning or to use a device which ++ doesn't support the JEDEC ID instruction. + + config MTD_SLRAM + tristate "Uncached system RAM" +Index: linux-2.6.23.17/drivers/mtd/devices/m25p80.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/devices/m25p80.c ++++ linux-2.6.23.17/drivers/mtd/devices/m25p80.c +@@ -1,5 +1,5 @@ + /* +- * MTD SPI driver for ST M25Pxx flash chips ++ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips + * + * Author: Mike Lavender, mike@steroidmicros.com + * +@@ -19,33 +19,32 @@ + #include + #include + #include +-#include ++#include ++ + #include + #include ++ + #include + #include + +-#include +- +- +-/* NOTE: AT 25F and SST 25LF series are very similar, +- * but commands for sector erase and chip id differ... +- */ + + #define FLASH_PAGESIZE 256 + + /* Flash opcodes. */ +-#define OPCODE_WREN 6 /* Write enable */ +-#define OPCODE_RDSR 5 /* Read status register */ +-#define OPCODE_READ 3 /* Read data bytes */ +-#define OPCODE_PP 2 /* Page program */ +-#define OPCODE_SE 0xd8 /* Sector erase */ +-#define OPCODE_RES 0xab /* Read Electronic Signature */ ++#define OPCODE_WREN 0x06 /* Write enable */ ++#define OPCODE_RDSR 0x05 /* Read status register */ ++#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */ ++#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ ++#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ ++#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ ++#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ ++#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ + #define OPCODE_RDID 0x9f /* Read JEDEC ID */ + + /* Status Register bits. */ + #define SR_WIP 1 /* Write in progress */ + #define SR_WEL 2 /* Write enable latch */ ++/* meaning of other SR_* bits may differ between vendors */ + #define SR_BP0 4 /* Block protect 0 */ + #define SR_BP1 8 /* Block protect 1 */ + #define SR_BP2 0x10 /* Block protect 2 */ +@@ -65,9 +64,10 @@ + + struct m25p { + struct spi_device *spi; +- struct semaphore lock; ++ struct mutex lock; + struct mtd_info mtd; +- unsigned partitioned; ++ unsigned partitioned:1; ++ u8 erase_opcode; + u8 command[4]; + }; + +@@ -150,8 +150,9 @@ static int wait_till_ready(struct m25p * + */ + static int erase_sector(struct m25p *flash, u32 offset) + { +- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s at 0x%08x\n", flash->spi->dev.bus_id, +- __FUNCTION__, offset); ++ DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n", ++ flash->spi->dev.bus_id, __FUNCTION__, ++ flash->mtd.erasesize / 1024, offset); + + /* Wait until finished previous write command. */ + if (wait_till_ready(flash)) +@@ -161,7 +162,7 @@ static int erase_sector(struct m25p *fla + write_enable(flash); + + /* Set up command buffer. */ +- flash->command[0] = OPCODE_SE; ++ flash->command[0] = flash->erase_opcode; + flash->command[1] = offset >> 16; + flash->command[2] = offset >> 8; + flash->command[3] = offset; +@@ -201,13 +202,17 @@ static int m25p80_erase(struct mtd_info + addr = instr->addr; + len = instr->len; + +- down(&flash->lock); ++ mutex_lock(&flash->lock); ++ ++ /* REVISIT in some cases we could speed up erasing large regions ++ * by using OPCODE_SE instead of OPCODE_BE_4K ++ */ + + /* now erase those sectors */ + while (len) { + if (erase_sector(flash, addr)) { + instr->state = MTD_ERASE_FAILED; +- up(&flash->lock); ++ mutex_unlock(&flash->lock); + return -EIO; + } + +@@ -215,7 +220,7 @@ static int m25p80_erase(struct mtd_info + len -= mtd->erasesize; + } + +- up(&flash->lock); ++ mutex_unlock(&flash->lock); + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); +@@ -260,16 +265,19 @@ static int m25p80_read(struct mtd_info * + if (retlen) + *retlen = 0; + +- down(&flash->lock); ++ mutex_lock(&flash->lock); + + /* Wait till previous write/erase is done. */ + if (wait_till_ready(flash)) { + /* REVISIT status return?? */ +- up(&flash->lock); ++ mutex_unlock(&flash->lock); + return 1; + } + +- /* NOTE: OPCODE_FAST_READ (if available) is faster... */ ++ /* FIXME switch to OPCODE_FAST_READ. It's required for higher ++ * clocks; and at this writing, every chip this driver handles ++ * supports that opcode. ++ */ + + /* Set up the write data buffer. */ + flash->command[0] = OPCODE_READ; +@@ -281,7 +289,7 @@ static int m25p80_read(struct mtd_info * + + *retlen = m.actual_length - sizeof(flash->command); + +- up(&flash->lock); ++ mutex_unlock(&flash->lock); + + return 0; + } +@@ -323,7 +331,7 @@ static int m25p80_write(struct mtd_info + t[1].tx_buf = buf; + spi_message_add_tail(&t[1], &m); + +- down(&flash->lock); ++ mutex_lock(&flash->lock); + + /* Wait until finished previous write command. */ + if (wait_till_ready(flash)) +@@ -381,10 +389,10 @@ static int m25p80_write(struct mtd_info + if (retlen) + *retlen += m.actual_length + - sizeof(flash->command); +- } +- } ++ } ++ } + +- up(&flash->lock); ++ mutex_unlock(&flash->lock); + + return 0; + } +@@ -398,24 +406,118 @@ static int m25p80_write(struct mtd_info + + struct flash_info { + char *name; +- u8 id; +- u16 jedec_id; ++ ++ /* JEDEC id zero means "no ID" (most older chips); otherwise it has ++ * a high byte of zero plus three data bytes: the manufacturer id, ++ * then a two byte device id. ++ */ ++ u32 jedec_id; ++ ++ /* The size listed here is what works with OPCODE_SE, which isn't ++ * necessarily called a "sector" by the vendor. ++ */ + unsigned sector_size; +- unsigned n_sectors; ++ u16 n_sectors; ++ ++ u16 flags; ++#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */ + }; + ++ ++/* NOTE: double check command sets and memory organization when you add ++ * more flash chips. This current list focusses on newer chips, which ++ * have been converging on command sets which including JEDEC ID. ++ */ + static struct flash_info __devinitdata m25p_data [] = { +- /* REVISIT: fill in JEDEC ids, for parts that have them */ +- { "m25p05", 0x05, 0x2010, 32 * 1024, 2 }, +- { "m25p10", 0x10, 0x2011, 32 * 1024, 4 }, +- { "m25p20", 0x11, 0x2012, 64 * 1024, 4 }, +- { "m25p40", 0x12, 0x2013, 64 * 1024, 8 }, +- { "m25p80", 0x13, 0x0000, 64 * 1024, 16 }, +- { "m25p16", 0x14, 0x2015, 64 * 1024, 32 }, +- { "m25p32", 0x15, 0x2016, 64 * 1024, 64 }, +- { "m25p64", 0x16, 0x2017, 64 * 1024, 128 }, ++ ++ /* Atmel -- some are (confusingly) marketed as "DataFlash" */ ++ { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, }, ++ { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, }, ++ ++ { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, }, ++ ++ { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, }, ++ { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, }, ++ { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, }, ++ { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, }, ++ ++ /* Spansion -- single (large) sector size only, at least ++ * for the chips listed here (without boot sectors). ++ */ ++ { "s25sl004a", 0x010212, 64 * 1024, 8, }, ++ { "s25sl008a", 0x010213, 64 * 1024, 16, }, ++ { "s25sl016a", 0x010214, 64 * 1024, 32, }, ++ { "s25sl032a", 0x010215, 64 * 1024, 64, }, ++ { "s25sl064a", 0x010216, 64 * 1024, 128, }, ++ ++ /* SST -- large erase sizes are "overlays", "sectors" are 4K */ ++ { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, }, ++ { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, }, ++ { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, }, ++ { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, }, ++ ++ /* ST Microelectronics -- newer production may have feature updates */ ++ { "m25p05", 0x202010, 32 * 1024, 2, }, ++ { "m25p10", 0x202011, 32 * 1024, 4, }, ++ { "m25p20", 0x202012, 64 * 1024, 4, }, ++ { "m25p40", 0x202013, 64 * 1024, 8, }, ++ { "m25p80", 0, 64 * 1024, 16, }, ++ { "m25p16", 0x202015, 64 * 1024, 32, }, ++ { "m25p32", 0x202016, 64 * 1024, 64, }, ++ { "m25p64", 0x202017, 64 * 1024, 128, }, ++ { "m25p128", 0x202018, 256 * 1024, 64, }, ++ ++ { "m45pe80", 0x204014, 64 * 1024, 16, }, ++ { "m45pe16", 0x204015, 64 * 1024, 32, }, ++ ++ { "m25pe80", 0x208014, 64 * 1024, 16, }, ++ { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, }, ++ ++ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ ++ { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, }, ++ { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, }, ++ { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, }, ++ { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, }, ++ { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, }, ++ { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, }, ++ { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, }, + }; + ++static struct flash_info *__devinit jedec_probe(struct spi_device *spi) ++{ ++ int tmp; ++ u8 code = OPCODE_RDID; ++ u8 id[3]; ++ u32 jedec; ++ struct flash_info *info; ++ ++ /* JEDEC also defines an optional "extended device information" ++ * string for after vendor-specific data, after the three bytes ++ * we use here. Supporting some chips might require using it. ++ */ ++ tmp = spi_write_then_read(spi, &code, 1, id, 3); ++ if (tmp < 0) { ++ DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n", ++ spi->dev.bus_id, tmp); ++ return NULL; ++ } ++ jedec = id[0]; ++ jedec = jedec << 8; ++ jedec |= id[1]; ++ jedec = jedec << 8; ++ jedec |= id[2]; ++ ++ for (tmp = 0, info = m25p_data; ++ tmp < ARRAY_SIZE(m25p_data); ++ tmp++, info++) { ++ if (info->jedec_id == jedec) ++ return info; ++ } ++ dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); ++ return NULL; ++} ++ ++ + /* + * board specific setup should have ensured the SPI clock used here + * matches what the READ command supports, at least until this driver +@@ -429,37 +531,51 @@ static int __devinit m25p_probe(struct s + unsigned i; + + /* Platform data helps sort out which chip type we have, as +- * well as how this board partitions it. ++ * well as how this board partitions it. If we don't have ++ * a chip ID, try the JEDEC id commands; they'll work for most ++ * newer chips, even if we don't recognize the particular chip. + */ + data = spi->dev.platform_data; +- if (!data || !data->type) { +- /* FIXME some chips can identify themselves with RES +- * or JEDEC get-id commands. Try them ... +- */ +- DEBUG(MTD_DEBUG_LEVEL1, "%s: no chip id\n", +- spi->dev.bus_id); +- return -ENODEV; +- } ++ if (data && data->type) { ++ for (i = 0, info = m25p_data; ++ i < ARRAY_SIZE(m25p_data); ++ i++, info++) { ++ if (strcmp(data->type, info->name) == 0) ++ break; ++ } + +- for (i = 0, info = m25p_data; i < ARRAY_SIZE(m25p_data); i++, info++) { +- if (strcmp(data->type, info->name) == 0) +- break; +- } +- if (i == ARRAY_SIZE(m25p_data)) { +- DEBUG(MTD_DEBUG_LEVEL1, "%s: unrecognized id %s\n", +- spi->dev.bus_id, data->type); ++ /* unrecognized chip? */ ++ if (i == ARRAY_SIZE(m25p_data)) { ++ DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n", ++ spi->dev.bus_id, data->type); ++ info = NULL; ++ ++ /* recognized; is that chip really what's there? */ ++ } else if (info->jedec_id) { ++ struct flash_info *chip = jedec_probe(spi); ++ ++ if (!chip || chip != info) { ++ dev_warn(&spi->dev, "found %s, expected %s\n", ++ chip ? chip->name : "UNKNOWN", ++ info->name); ++ info = NULL; ++ } ++ } ++ } else ++ info = jedec_probe(spi); ++ ++ if (!info) + return -ENODEV; +- } + + flash = kzalloc(sizeof *flash, GFP_KERNEL); + if (!flash) + return -ENOMEM; + + flash->spi = spi; +- init_MUTEX(&flash->lock); ++ mutex_init(&flash->lock); + dev_set_drvdata(&spi->dev, flash); + +- if (data->name) ++ if (data && data->name) + flash->mtd.name = data->name; + else + flash->mtd.name = spi->dev.bus_id; +@@ -468,17 +584,25 @@ static int __devinit m25p_probe(struct s + flash->mtd.writesize = 1; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.size = info->sector_size * info->n_sectors; +- flash->mtd.erasesize = info->sector_size; + flash->mtd.erase = m25p80_erase; + flash->mtd.read = m25p80_read; + flash->mtd.write = m25p80_write; + ++ /* prefer "small sector" erase if possible */ ++ if (info->flags & SECT_4K) { ++ flash->erase_opcode = OPCODE_BE_4K; ++ flash->mtd.erasesize = 4096; ++ } else { ++ flash->erase_opcode = OPCODE_SE; ++ flash->mtd.erasesize = info->sector_size; ++ } ++ + dev_info(&spi->dev, "%s (%d Kbytes)\n", info->name, + flash->mtd.size / 1024); + + DEBUG(MTD_DEBUG_LEVEL2, +- "mtd .name = %s, .size = 0x%.8x (%uM) " +- ".erasesize = 0x%.8x (%uK) .numeraseregions = %d\n", ++ "mtd .name = %s, .size = 0x%.8x (%uMiB) " ++ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", + flash->mtd.name, + flash->mtd.size, flash->mtd.size / (1024*1024), + flash->mtd.erasesize, flash->mtd.erasesize / 1024, +@@ -488,7 +612,7 @@ static int __devinit m25p_probe(struct s + for (i = 0; i < flash->mtd.numeraseregions; i++) + DEBUG(MTD_DEBUG_LEVEL2, + "mtd.eraseregions[%d] = { .offset = 0x%.8x, " +- ".erasesize = 0x%.8x (%uK), " ++ ".erasesize = 0x%.8x (%uKiB), " + ".numblocks = %d }\n", + i, flash->mtd.eraseregions[i].offset, + flash->mtd.eraseregions[i].erasesize, +@@ -516,14 +640,14 @@ static int __devinit m25p_probe(struct s + } + + if (nr_parts > 0) { +- for (i = 0; i < data->nr_parts; i++) { ++ for (i = 0; i < nr_parts; i++) { + DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " + "{.name = %s, .offset = 0x%.8x, " +- ".size = 0x%.8x (%uK) }\n", +- i, data->parts[i].name, +- data->parts[i].offset, +- data->parts[i].size, +- data->parts[i].size / 1024); ++ ".size = 0x%.8x (%uKiB) }\n", ++ i, parts[i].name, ++ parts[i].offset, ++ parts[i].size, ++ parts[i].size / 1024); + } + flash->partitioned = 1; + return add_mtd_partitions(&flash->mtd, parts, nr_parts); +@@ -560,6 +684,11 @@ static struct spi_driver m25p80_driver = + }, + .probe = m25p_probe, + .remove = __devexit_p(m25p_remove), ++ ++ /* REVISIT: many of these chips have deep power-down modes, which ++ * should clearly be entered on suspend() to minimize power use. ++ * And also when they're otherwise idle... ++ */ + }; + + +Index: linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/devices/mtd_dataflash.c ++++ linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -89,7 +90,7 @@ struct dataflash { + unsigned short page_offset; /* offset in flash address */ + unsigned int page_size; /* of bytes per page */ + +- struct semaphore lock; ++ struct mutex lock; + struct spi_device *spi; + + struct mtd_info mtd; +@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_in + x.len = 4; + spi_message_add_tail(&x, &msg); + +- down(&priv->lock); ++ mutex_lock(&priv->lock); + while (instr->len > 0) { + unsigned int pageaddr; + int status; +@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_in + instr->len -= priv->page_size; + } + } +- up(&priv->lock); ++ mutex_unlock(&priv->lock); + + /* Inform MTD subsystem that erase is complete */ + instr->state = MTD_ERASE_DONE; +@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_inf + x[1].len = len; + spi_message_add_tail(&x[1], &msg); + +- down(&priv->lock); ++ mutex_lock(&priv->lock); + + /* Continuous read, max clock = f(car) which may be less than + * the peak rate available. Some chips support commands with +@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_inf + /* plus 4 "don't care" bytes */ + + status = spi_sync(priv->spi, &msg); +- up(&priv->lock); ++ mutex_unlock(&priv->lock); + + if (status >= 0) { + *retlen = msg.actual_length - 8; +@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_in + else + writelen = len; + +- down(&priv->lock); ++ mutex_lock(&priv->lock); + while (remaining > 0) { + DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n", + pageaddr, offset, writelen); +@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_in + else + writelen = remaining; + } +- up(&priv->lock); ++ mutex_unlock(&priv->lock); + + return status; + } +@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, ch + if (!priv) + return -ENOMEM; + +- init_MUTEX(&priv->lock); ++ mutex_init(&priv->lock); + priv->spi = spi; + priv->page_size = pagesize; + priv->page_offset = pageoffset; +Index: linux-2.6.23.17/drivers/mtd/devices/pmc551.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/devices/pmc551.c ++++ linux-2.6.23.17/drivers/mtd/devices/pmc551.c +@@ -30,8 +30,8 @@ + * + * Notes: + * Due to what I assume is more buggy SROM, the 64M PMC551 I +- * have available claims that all 4 of it's DRAM banks have 64M +- * of ram configured (making a grand total of 256M onboard). ++ * have available claims that all 4 of its DRAM banks have 64MiB ++ * of ram configured (making a grand total of 256MiB onboard). + * This is slightly annoying since the BAR0 size reflects the + * aperture size, not the dram size, and the V370PDC supplies no + * other method for memory size discovery. This problem is +@@ -70,7 +70,7 @@ + * made the memory unusable, added a fix to code to touch up + * the DRAM some. + * +- * Bugs/FIXME's: ++ * Bugs/FIXMEs: + * * MUST fix the init function to not spin on a register + * waiting for it to set .. this does not safely handle busted + * devices that never reset the register correctly which will +@@ -562,10 +562,10 @@ static u32 fixup_pmc551(struct pci_dev * + /* + * Some screen fun + */ +- printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at " ++ printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at " + "0x%llx\n", (size < 1024) ? size : (size < 1048576) ? + size >> 10 : size >> 20, +- (size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size, ++ (size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size, + ((dcmd & (0x1 << 3)) == 0) ? "non-" : "", + (unsigned long long)pci_resource_start(dev, 0)); + +@@ -649,14 +649,10 @@ MODULE_DESCRIPTION(PMC551_VERSION); + * Stuff these outside the ifdef so as to not bust compiled in driver support + */ + static int msize = 0; +-#if defined(CONFIG_MTD_PMC551_APERTURE_SIZE) +-static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE; +-#else + static int asize = 0; +-#endif + + module_param(msize, int, 0); +-MODULE_PARM_DESC(msize, "memory size in Megabytes [1 - 1024]"); ++MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]"); + module_param(asize, int, 0); + MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]"); + +@@ -799,8 +795,7 @@ static int __init init_pmc551(void) + mtd->owner = THIS_MODULE; + + if (add_mtd_device(mtd)) { +- printk(KERN_NOTICE "pmc551: Failed to register new " +- "device\n"); ++ printk(KERN_NOTICE "pmc551: Failed to register new device\n"); + pci_iounmap(PCI_Device, priv->start); + kfree(mtd->priv); + kfree(mtd); +@@ -811,13 +806,13 @@ static int __init init_pmc551(void) + pci_dev_get(PCI_Device); + + printk(KERN_NOTICE "Registered pmc551 memory device.\n"); +- printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n", ++ printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n", + priv->asize >> 20, + priv->start, priv->start + priv->asize); +- printk(KERN_NOTICE "Total memory is %d%c\n", ++ printk(KERN_NOTICE "Total memory is %d%sB\n", + (length < 1024) ? length : + (length < 1048576) ? length >> 10 : length >> 20, +- (length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M'); ++ (length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi"); + priv->nextpmc551 = pmc551list; + pmc551list = mtd; + found++; +@@ -850,7 +845,7 @@ static void __exit cleanup_pmc551(void) + pmc551list = priv->nextpmc551; + + if (priv->start) { +- printk(KERN_DEBUG "pmc551: unmapping %dM starting at " ++ printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at " + "0x%p\n", priv->asize >> 20, priv->start); + pci_iounmap(priv->dev, priv->start); + } +Index: linux-2.6.23.17/drivers/mtd/maps/nettel.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/maps/nettel.c ++++ linux-2.6.23.17/drivers/mtd/maps/nettel.c +@@ -158,68 +158,11 @@ static struct notifier_block nettel_noti + nettel_reboot_notifier, NULL, 0 + }; + +-/* +- * Erase the configuration file system. +- * Used to support the software reset button. +- */ +-static void nettel_erasecallback(struct erase_info *done) +-{ +- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; +- wake_up(wait_q); +-} +- +-static struct erase_info nettel_erase; +- +-int nettel_eraseconfig(void) +-{ +- struct mtd_info *mtd; +- DECLARE_WAITQUEUE(wait, current); +- wait_queue_head_t wait_q; +- int ret; +- +- init_waitqueue_head(&wait_q); +- mtd = get_mtd_device(NULL, 2); +- if (!IS_ERR(mtd)) { +- nettel_erase.mtd = mtd; +- nettel_erase.callback = nettel_erasecallback; +- nettel_erase.callback = NULL; +- nettel_erase.addr = 0; +- nettel_erase.len = mtd->size; +- nettel_erase.priv = (u_long) &wait_q; +- nettel_erase.priv = 0; +- +- set_current_state(TASK_INTERRUPTIBLE); +- add_wait_queue(&wait_q, &wait); +- +- ret = mtd->erase(mtd, &nettel_erase); +- if (ret) { +- set_current_state(TASK_RUNNING); +- remove_wait_queue(&wait_q, &wait); +- put_mtd_device(mtd); +- return(ret); +- } +- +- schedule(); /* Wait for erase to finish. */ +- remove_wait_queue(&wait_q, &wait); +- +- put_mtd_device(mtd); +- } +- +- return(0); +-} +- +-#else +- +-int nettel_eraseconfig(void) +-{ +- return(0); +-} +- + #endif + + /****************************************************************************/ + +-int __init nettel_init(void) ++static int __init nettel_init(void) + { + volatile unsigned long *amdpar; + unsigned long amdaddr, maxsize; +@@ -421,10 +364,6 @@ int __init nettel_init(void) + + intel_mtd->owner = THIS_MODULE; + +-#ifndef CONFIG_BLK_DEV_INITRD +- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 1); +-#endif +- + num_intel_partitions = sizeof(nettel_intel_partitions) / + sizeof(nettel_intel_partitions[0]); + +@@ -477,7 +416,7 @@ out_unmap2: + + /****************************************************************************/ + +-void __exit nettel_cleanup(void) ++static void __exit nettel_cleanup(void) + { + #ifdef CONFIG_MTD_CFI_INTELEXT + unregister_reboot_notifier(&nettel_notifier_block); +Index: linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/maps/pmcmsp-ramroot.c ++++ linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c +@@ -79,7 +79,6 @@ static int __init init_rrmap(void) + rr_mtd->owner = THIS_MODULE; + + add_mtd_device(rr_mtd); +- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, rr_mtd->index); + + return 0; + } +Index: linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/mtd_blkdevs.c ++++ linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c +@@ -24,10 +24,9 @@ + #include + #include + +-static LIST_HEAD(blktrans_majors); ++#include "mtdcore.h" + +-extern struct mutex mtd_table_mutex; +-extern struct mtd_info *mtd_table[]; ++static LIST_HEAD(blktrans_majors); + + struct mtd_blkcore_priv { + struct task_struct *thread; +@@ -202,7 +201,7 @@ static int blktrans_ioctl(struct inode * + } + } + +-struct block_device_operations mtd_blktrans_ops = { ++static struct block_device_operations mtd_blktrans_ops = { + .owner = THIS_MODULE, + .open = blktrans_open, + .release = blktrans_release, +Index: linux-2.6.23.17/drivers/mtd/mtdchar.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/mtdchar.c ++++ linux-2.6.23.17/drivers/mtd/mtdchar.c +@@ -137,7 +137,8 @@ static int mtd_close(struct inode *inode + + DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n"); + +- if (mtd->sync) ++ /* Only sync if opened RW */ ++ if ((file->f_mode & 2) && mtd->sync) + mtd->sync(mtd); + + put_mtd_device(mtd); +Index: linux-2.6.23.17/drivers/mtd/mtdcore.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/mtdcore.c ++++ linux-2.6.23.17/drivers/mtd/mtdcore.c +@@ -22,6 +22,8 @@ + + #include + ++#include "mtdcore.h" ++ + /* These are exported solely for the purpose of mtd_blkdevs.c. You + should not use them for _anything_ else */ + DEFINE_MUTEX(mtd_table_mutex); +Index: linux-2.6.23.17/drivers/mtd/nand/Kconfig +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/nand/Kconfig ++++ linux-2.6.23.17/drivers/mtd/nand/Kconfig +@@ -134,10 +134,10 @@ config MTD_NAND_S3C2410_HWECC + + config MTD_NAND_NDFC + tristate "NDFC NanD Flash Controller" +- depends on 44x ++ depends on 4xx + select MTD_NAND_ECC_SMC + help +- NDFC Nand Flash Controllers are integrated in EP44x SoCs ++ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs + + config MTD_NAND_S3C2410_CLKSTOP + bool "S3C2410 NAND IDLE clock stop" +@@ -237,7 +237,7 @@ config MTD_NAND_CAFE + select REED_SOLOMON + select REED_SOLOMON_DEC16 + help +- Use NAND flash attached to the CAFÉ chip designed for the $100 ++ Use NAND flash attached to the CAFÉ chip designed for the OLPC + laptop. + + config MTD_NAND_CS553X +Index: linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/nand/cafe_nand.c ++++ linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c +@@ -822,14 +822,53 @@ static struct pci_device_id cafe_nand_tb + + MODULE_DEVICE_TABLE(pci, cafe_nand_tbl); + ++static int cafe_nand_resume(struct pci_dev *pdev) ++{ ++ uint32_t timing1, timing2, timing3; ++ uint32_t ctrl; ++ struct mtd_info *mtd = pci_get_drvdata(pdev); ++ struct cafe_priv *cafe = mtd->priv; ++ ++ timing1 = timing2 = timing3 = 0xffffffff; ++ /* Start off by resetting the NAND controller completely */ ++ cafe_writel(cafe, 1, NAND_RESET); ++ cafe_writel(cafe, 0, NAND_RESET); ++ cafe_writel(cafe, timing1, NAND_TIMING1); ++ cafe_writel(cafe, timing2, NAND_TIMING2); ++ cafe_writel(cafe, timing3, NAND_TIMING3); ++ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK); ++ ++ /* Disable master reset, enable NAND clock */ ++ ctrl = cafe_readl(cafe, GLOBAL_CTRL); ++ ctrl &= 0xffffeff0; ++ ctrl |= 0x00007000; ++ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL); ++ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL); ++ cafe_writel(cafe, 0, NAND_DMA_CTRL); ++ cafe_writel(cafe, 0x7006, GLOBAL_CTRL); ++ cafe_writel(cafe, 0x700a, GLOBAL_CTRL); ++ ++ /* Set up DMA address */ ++ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0); ++ if (sizeof(cafe->dmaaddr) > 4) ++ /* Shift in two parts to shut the compiler up */ ++ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1); ++ else ++ cafe_writel(cafe, 0, NAND_DMA_ADDR1); ++ ++ /* Enable NAND IRQ in global IRQ mask register */ ++ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK); ++ return 0; ++} ++ + static struct pci_driver cafe_nand_pci_driver = { + .name = "CAFÉ NAND", + .id_table = cafe_nand_tbl, + .probe = cafe_nand_probe, + .remove = __devexit_p(cafe_nand_remove), ++ .resume = cafe_nand_resume, + #ifdef CONFIG_PMx + .suspend = cafe_nand_suspend, +- .resume = cafe_nand_resume, + #endif + }; + +Index: linux-2.6.23.17/drivers/mtd/nand/ndfc.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/nand/ndfc.c ++++ linux-2.6.23.17/drivers/mtd/nand/ndfc.c +@@ -24,7 +24,11 @@ + #include + + #include ++#ifdef CONFIG_40x ++#include ++#else + #include ++#endif + + struct ndfc_nand_mtd { + struct mtd_info mtd; +@@ -230,7 +234,11 @@ static int ndfc_nand_probe(struct platfo + struct ndfc_controller *ndfc = &ndfc_ctrl; + unsigned long long phys = settings->ndfc_erpn | res->start; + ++#ifndef CONFIG_PHYS_64BIT ++ ndfc->ndfcbase = ioremap((phys_addr_t)phys, res->end - res->start + 1); ++#else + ndfc->ndfcbase = ioremap64(phys, res->end - res->start + 1); ++#endif + if (!ndfc->ndfcbase) { + printk(KERN_ERR "NDFC: ioremap failed\n"); + return -EIO; +Index: linux-2.6.23.17/drivers/mtd/onenand/Kconfig +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/onenand/Kconfig ++++ linux-2.6.23.17/drivers/mtd/onenand/Kconfig +@@ -40,4 +40,27 @@ config MTD_ONENAND_OTP + + OTP block is fully-guaranteed to be a valid block. + ++config MTD_ONENAND_2X_PROGRAM ++ bool "OneNAND 2X program support" ++ help ++ The 2X Program is an extension of Program Operation. ++ Since the device is equipped with two DataRAMs, and two-plane NAND ++ Flash memory array, these two component enables simultaneous program ++ of 4KiB. Plane1 has only even blocks such as block0, block2, block4 ++ while Plane2 has only odd blocks such as block1, block3, block5. ++ So MTD regards it as 4KiB page size and 256KiB block size ++ ++ Now the following chips support it. (KFXXX16Q2M) ++ Demux: KFG2G16Q2M, KFH4G16Q2M, KFW8G16Q2M, ++ Mux: KFM2G16Q2M, KFN4G16Q2M, ++ ++ And more recent chips ++ ++config MTD_ONENAND_SIM ++ tristate "OneNAND simulator support" ++ depends on MTD_PARTITIONS ++ help ++ The simulator may simulate various OneNAND flash chips for the ++ OneNAND MTD layer. ++ + endif # MTD_ONENAND +Index: linux-2.6.23.17/drivers/mtd/onenand/Makefile +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/onenand/Makefile ++++ linux-2.6.23.17/drivers/mtd/onenand/Makefile +@@ -8,4 +8,7 @@ obj-$(CONFIG_MTD_ONENAND) += onenand.o + # Board specific. + obj-$(CONFIG_MTD_ONENAND_GENERIC) += generic.o + ++# Simulator ++obj-$(CONFIG_MTD_ONENAND_SIM) += onenand_sim.o ++ + onenand-objs = onenand_base.o onenand_bbt.o +Index: linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/onenand/onenand_base.c ++++ linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c +@@ -206,6 +206,15 @@ static int onenand_command(struct mtd_in + default: + block = (int) (addr >> this->erase_shift); + page = (int) (addr >> this->page_shift); ++ ++ if (ONENAND_IS_2PLANE(this)) { ++ /* Make the even block number */ ++ block &= ~1; ++ /* Is it the odd plane? */ ++ if (addr & this->writesize) ++ block++; ++ page >>= 1; ++ } + page &= this->page_mask; + break; + } +@@ -216,8 +225,12 @@ static int onenand_command(struct mtd_in + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + +- /* Switch to the next data buffer */ +- ONENAND_SET_NEXT_BUFFERRAM(this); ++ if (ONENAND_IS_2PLANE(this)) ++ /* It is always BufferRAM0 */ ++ ONENAND_SET_BUFFERRAM0(this); ++ else ++ /* Switch to the next data buffer */ ++ ONENAND_SET_NEXT_BUFFERRAM(this); + + return 0; + } +@@ -247,6 +260,8 @@ static int onenand_command(struct mtd_in + break; + + default: ++ if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG) ++ cmd = ONENAND_CMD_2X_PROG; + dataram = ONENAND_CURRENT_BUFFERRAM(this); + break; + } +@@ -445,8 +460,9 @@ static inline int onenand_bufferram_offs + struct onenand_chip *this = mtd->priv; + + if (ONENAND_CURRENT_BUFFERRAM(this)) { ++ /* Note: the 'this->writesize' is a real page size */ + if (area == ONENAND_DATARAM) +- return mtd->writesize; ++ return this->writesize; + if (area == ONENAND_SPARERAM) + return mtd->oobsize; + } +@@ -572,6 +588,30 @@ static int onenand_write_bufferram(struc + } + + /** ++ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode ++ * @param mtd MTD data structure ++ * @param addr address to check ++ * @return blockpage address ++ * ++ * Get blockpage address at 2x program mode ++ */ ++static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr) ++{ ++ struct onenand_chip *this = mtd->priv; ++ int blockpage, block, page; ++ ++ /* Calculate the even block number */ ++ block = (int) (addr >> this->erase_shift) & ~1; ++ /* Is it the odd plane? */ ++ if (addr & this->writesize) ++ block++; ++ page = (int) (addr >> (this->page_shift + 1)) & this->page_mask; ++ blockpage = (block << 7) | page; ++ ++ return blockpage; ++} ++ ++/** + * onenand_check_bufferram - [GENERIC] Check BufferRAM information + * @param mtd MTD data structure + * @param addr address to check +@@ -585,7 +625,10 @@ static int onenand_check_bufferram(struc + int blockpage, found = 0; + unsigned int i; + +- blockpage = (int) (addr >> this->page_shift); ++ if (ONENAND_IS_2PLANE(this)) ++ blockpage = onenand_get_2x_blockpage(mtd, addr); ++ else ++ blockpage = (int) (addr >> this->page_shift); + + /* Is there valid data? */ + i = ONENAND_CURRENT_BUFFERRAM(this); +@@ -625,7 +668,10 @@ static void onenand_update_bufferram(str + int blockpage; + unsigned int i; + +- blockpage = (int) (addr >> this->page_shift); ++ if (ONENAND_IS_2PLANE(this)) ++ blockpage = onenand_get_2x_blockpage(mtd, addr); ++ else ++ blockpage = (int) (addr >> this->page_shift); + + /* Invalidate another BufferRAM */ + i = ONENAND_NEXT_BUFFERRAM(this); +@@ -734,6 +780,7 @@ static int onenand_read(struct mtd_info + int read = 0, column; + int thislen; + int ret = 0, boundary = 0; ++ int writesize = this->writesize; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); + +@@ -754,22 +801,22 @@ static int onenand_read(struct mtd_info + /* Do first load to bufferRAM */ + if (read < len) { + if (!onenand_check_bufferram(mtd, from)) { +- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize); ++ this->command(mtd, ONENAND_CMD_READ, from, writesize); + ret = this->wait(mtd, FL_READING); + onenand_update_bufferram(mtd, from, !ret); + } + } + +- thislen = min_t(int, mtd->writesize, len - read); +- column = from & (mtd->writesize - 1); +- if (column + thislen > mtd->writesize) +- thislen = mtd->writesize - column; ++ thislen = min_t(int, writesize, len - read); ++ column = from & (writesize - 1); ++ if (column + thislen > writesize) ++ thislen = writesize - column; + + while (!ret) { + /* If there is more to load then start next load */ + from += thislen; + if (read + thislen < len) { +- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize); ++ this->command(mtd, ONENAND_CMD_READ, from, writesize); + /* + * Chip boundary handling in DDP + * Now we issued chip 1 read and pointed chip 1 +@@ -794,7 +841,7 @@ static int onenand_read(struct mtd_info + this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2); + ONENAND_SET_NEXT_BUFFERRAM(this); + buf += thislen; +- thislen = min_t(int, mtd->writesize, len - read); ++ thislen = min_t(int, writesize, len - read); + column = 0; + cond_resched(); + /* Now wait for load */ +@@ -1079,7 +1126,7 @@ int onenand_bbt_read_oob(struct mtd_info + /* Read more? */ + if (read < len) { + /* Update Page size */ +- from += mtd->writesize; ++ from += this->writesize; + column = 0; + } + } +@@ -1135,12 +1182,12 @@ static int onenand_verify(struct mtd_inf + int thislen, column; + + while (len != 0) { +- thislen = min_t(int, mtd->writesize, len); +- column = addr & (mtd->writesize - 1); +- if (column + thislen > mtd->writesize) +- thislen = mtd->writesize - column; ++ thislen = min_t(int, this->writesize, len); ++ column = addr & (this->writesize - 1); ++ if (column + thislen > this->writesize) ++ thislen = this->writesize - column; + +- this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize); ++ this->command(mtd, ONENAND_CMD_READ, addr, this->writesize); + + onenand_update_bufferram(mtd, addr, 0); + +@@ -1236,6 +1283,10 @@ static int onenand_write(struct mtd_info + + /* In partial page write we don't update bufferram */ + onenand_update_bufferram(mtd, to, !ret && !subpage); ++ if (ONENAND_IS_2PLANE(this)) { ++ ONENAND_SET_BUFFERRAM1(this); ++ onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage); ++ } + + if (ret) { + printk(KERN_ERR "onenand_write: write filaed %d\n", ret); +@@ -1384,6 +1435,10 @@ static int onenand_do_write_oob(struct m + this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); + + onenand_update_bufferram(mtd, to, 0); ++ if (ONENAND_IS_2PLANE(this)) { ++ ONENAND_SET_BUFFERRAM1(this); ++ onenand_update_bufferram(mtd, to + this->writesize, 0); ++ } + + ret = this->wait(mtd, FL_WRITING); + if (ret) { +@@ -2107,6 +2162,7 @@ static int onenand_lock_user_prot_reg(st + * + * Check and set OneNAND features + * - lock scheme ++ * - two plane + */ + static void onenand_check_features(struct mtd_info *mtd) + { +@@ -2118,19 +2174,35 @@ static void onenand_check_features(struc + process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT; + + /* Lock scheme */ +- if (density >= ONENAND_DEVICE_DENSITY_1Gb) { ++ switch (density) { ++ case ONENAND_DEVICE_DENSITY_4Gb: ++ this->options |= ONENAND_HAS_2PLANE; ++ ++ case ONENAND_DEVICE_DENSITY_2Gb: ++ /* 2Gb DDP don't have 2 plane */ ++ if (!ONENAND_IS_DDP(this)) ++ this->options |= ONENAND_HAS_2PLANE; ++ this->options |= ONENAND_HAS_UNLOCK_ALL; ++ ++ case ONENAND_DEVICE_DENSITY_1Gb: + /* A-Die has all block unlock */ +- if (process) { +- printk(KERN_DEBUG "Chip support all block unlock\n"); ++ if (process) + this->options |= ONENAND_HAS_UNLOCK_ALL; +- } +- } else { +- /* Some OneNAND has continues lock scheme */ +- if (!process) { +- printk(KERN_DEBUG "Lock scheme is Continues Lock\n"); ++ break; ++ ++ default: ++ /* Some OneNAND has continuous lock scheme */ ++ if (!process) + this->options |= ONENAND_HAS_CONT_LOCK; +- } ++ break; + } ++ ++ if (this->options & ONENAND_HAS_CONT_LOCK) ++ printk(KERN_DEBUG "Lock scheme is Continuous Lock\n"); ++ if (this->options & ONENAND_HAS_UNLOCK_ALL) ++ printk(KERN_DEBUG "Chip support all block unlock\n"); ++ if (this->options & ONENAND_HAS_2PLANE) ++ printk(KERN_DEBUG "Chip has 2 plane\n"); + } + + /** +@@ -2257,6 +2329,8 @@ static int onenand_probe(struct mtd_info + this->erase_shift = ffs(mtd->erasesize) - 1; + this->page_shift = ffs(mtd->writesize) - 1; + this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1; ++ /* It's real page size */ ++ this->writesize = mtd->writesize; + + /* REVIST: Multichip handling */ + +@@ -2265,6 +2339,17 @@ static int onenand_probe(struct mtd_info + /* Check OneNAND features */ + onenand_check_features(mtd); + ++ /* ++ * We emulate the 4KiB page and 256KiB erase block size ++ * But oobsize is still 64 bytes. ++ * It is only valid if you turn on 2X program support, ++ * Otherwise it will be ignored by compiler. ++ */ ++ if (ONENAND_IS_2PLANE(this)) { ++ mtd->writesize <<= 1; ++ mtd->erasesize <<= 1; ++ } ++ + return 0; + } + +Index: linux-2.6.23.17/drivers/pci/quirks.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/pci/quirks.c ++++ linux-2.6.23.17/drivers/pci/quirks.c +@@ -1396,6 +1396,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN + DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); + + /* ++ * According to Tom Sylla, the Geode does not support PCI power management ++ * transition, so we shouldn't need the D3hot delay. ++ */ ++static void __init quirk_geode_pci_pm(struct pci_dev *dev) ++{ ++ pci_pm_d3_delay = 0; ++} ++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, quirk_geode_pci_pm); ++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_geode_pci_pm); ++ ++/* + * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size + * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. + * Re-allocate the region if needed... +Index: linux-2.6.23.17/drivers/video/Kconfig +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/Kconfig ++++ linux-2.6.23.17/drivers/video/Kconfig +@@ -594,7 +594,7 @@ config FB_TGA + + config FB_VESA + bool "VESA VGA graphics support" +- depends on (FB = y) && X86 ++ depends on (FB = y) && X86 && !VGA_NOPROBE + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT +@@ -1028,7 +1028,7 @@ config FB_CARILLO_RANCH + + config FB_INTEL + tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" +- depends on FB && EXPERIMENTAL && PCI && X86 ++ depends on FB && EXPERIMENTAL && PCI && X86 && !VGA_NOPROBE + select AGP + select AGP_INTEL + select FB_MODE_HELPERS +@@ -1383,7 +1383,7 @@ config FB_SAVAGE_ACCEL + + config FB_SIS + tristate "SiS/XGI display support" +- depends on FB && PCI ++ depends on FB && PCI && !VGA_NOPROBE + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT +@@ -1822,6 +1822,15 @@ config FB_PS3_DEFAULT_SIZE_M + The default value can be overridden on the kernel command line + using the "ps3fb" option (e.g. "ps3fb=9M"); + ++config FB_OLPC_DCON ++ tristate "One Laptop Per Child Display CONtroller support" ++ depends on OLPC ++ select I2C ++ ---help--- ++ Add support for the OLPC DCON controller. This controller is only ++ available on OLPC platforms. Unless you have one of these ++ platforms, you will want to say 'N'. ++ + config FB_XILINX + tristate "Xilinx frame buffer support" + depends on FB && XILINX_VIRTEX +Index: linux-2.6.23.17/drivers/video/Makefile +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/Makefile ++++ linux-2.6.23.17/drivers/video/Makefile +@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx + obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o + obj-$(CONFIG_FB_PS3) += ps3fb.o + obj-$(CONFIG_FB_SM501) += sm501fb.o ++obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon.o + obj-$(CONFIG_FB_XILINX) += xilinxfb.o + obj-$(CONFIG_FB_OMAP) += omap/ + +Index: linux-2.6.23.17/drivers/video/fbmem.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/fbmem.c ++++ linux-2.6.23.17/drivers/video/fbmem.c +@@ -820,6 +820,53 @@ static void try_to_load(int fb) + #endif /* CONFIG_KMOD */ + + int ++fb_powerup(struct fb_info *info) ++{ ++ int ret = 0; ++ ++ if (!info || info->state == FBINFO_STATE_RUNNING) ++ return 0; ++ ++ if (info->fbops->fb_powerup) ++ ret = info->fbops->fb_powerup(info); ++ ++ if (!ret) { ++ acquire_console_sem(); ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ } ++ ++ return ret; ++} ++ ++int ++fb_powerdown(struct fb_info *info) ++{ ++ int ret = 0; ++ ++ if (!info || info->state == FBINFO_STATE_SUSPENDED) ++ return 0; ++ ++ /* Tell everybody that the fbdev is going down */ ++ acquire_console_sem(); ++ fb_set_suspend(info, 1); ++ release_console_sem(); ++ ++ if (info->fbops->fb_powerdown) ++ ret = info->fbops->fb_powerdown(info); ++ ++ /* If the power down failed, then un-notify */ ++ ++ if (ret) { ++ acquire_console_sem(); ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ } ++ ++ return ret; ++} ++ ++int + fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var) + { + struct fb_fix_screeninfo *fix = &info->fix; +Index: linux-2.6.23.17/drivers/video/geode/Makefile +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/geode/Makefile ++++ linux-2.6.23.17/drivers/video/geode/Makefile +@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o + obj-$(CONFIG_FB_GEODE_LX) += lxfb.o + + gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o +-gxfb-objs := gxfb_core.o display_gx.o video_gx.o ++gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o + lxfb-objs := lxfb_core.o lxfb_ops.o +Index: linux-2.6.23.17/drivers/video/geode/display_gx.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/geode/display_gx.c ++++ linux-2.6.23.17/drivers/video/geode/display_gx.c +@@ -11,26 +11,44 @@ + * Free Software Foundation; either version 2 of the License, or * (at your + * option) any later version. + */ ++ ++#include + #include + #include + #include + #include + #include + #include ++#include + + #include "geodefb.h" + #include "display_gx.h" + +-#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE +-unsigned int gx_frame_buffer_size(void) ++static inline void rmwl(u32 val, u32 *reg) + { +- return CONFIG_FB_GEODE_GX_FBSIZE; ++ u32 in = readl(reg); ++ if (in != val) ++ writel(val, reg); + } +-#else ++ + unsigned int gx_frame_buffer_size(void) + { + unsigned int val; + ++#ifdef CONFIG_OLPC ++ if (machine_is_olpc() && !olpc_has_vsa()) { ++ u32 hi,lo; ++ rdmsr(GLIU0_P2D_RO0, lo, hi); ++ ++ /* Top page number */ ++ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20); ++ ++ val -= (lo & 0x000fffff); /* Subtract bottom page number */ ++ val += 1; /* Adjust page count */ ++ return (val << 12); ++ } ++#endif ++ + /* FB size is reported by a virtual register */ + /* Virtual register class = 0x02 */ + /* VG_MEM_SIZE(512Kb units) = 0x00 */ +@@ -41,7 +59,6 @@ unsigned int gx_frame_buffer_size(void) + val = (unsigned int)(inw(0xAC1E)) & 0xFFl; + return (val << 19); + } +-#endif + + int gx_line_delta(int xres, int bpp) + { +@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info * + gcfg = readl(par->dc_regs + DC_GENERAL_CFG); + dcfg = readl(par->dc_regs + DC_DISPLAY_CFG); + +- /* Disable the timing generator. */ +- dcfg &= ~(DC_DCFG_TGEN); +- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); +- +- /* Wait for pending memory requests before disabling the FIFO load. */ +- udelay(100); +- +- /* Disable FIFO load and compression. */ +- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); +- writel(gcfg, par->dc_regs + DC_GENERAL_CFG); +- +- /* Setup DCLK and its divisor. */ +- par->vid_ops->set_dclk(info); +- +- /* +- * Setup new mode. +- */ ++ /* Programming the clock is costly and ugly, so avoid if if we can */ ++ ++ if (par->curdclk != info->var.pixclock) { ++ /* Disable the timing generator. */ ++ dcfg &= ~(DC_DCFG_TGEN); ++ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); ++ ++ /* Wait for pending memory requests before disabling the FIFO load. */ ++ udelay(100); ++ ++ /* Disable FIFO load and compression. */ ++ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); ++ writel(gcfg, par->dc_regs + DC_GENERAL_CFG); ++ ++ /* Setup DCLK and its divisor. */ ++ par->vid_ops->set_dclk(info); ++ } + + /* Clear all unused feature bits. */ + gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE; +@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info * + gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE; + + /* Framebuffer start offset. */ +- writel(0, par->dc_regs + DC_FB_ST_OFFSET); ++ rmwl(0, par->dc_regs + DC_FB_ST_OFFSET); + + /* Line delta and line buffer length. */ +- writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH); +- writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, +- par->dc_regs + DC_LINE_SIZE); ++ rmwl(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH); ++ ++ rmwl(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, ++ par->dc_regs + DC_LINE_SIZE); + + + /* Enable graphics and video data and unmask address lines. */ +@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info * + vblankend = vsyncend + info->var.upper_margin; + vtotal = vblankend; + +- writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING); +- writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING); +- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING); +- +- writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING); +- writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING); +- writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING); ++ rmwl((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING); ++ rmwl((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING); ++ rmwl((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING); ++ rmwl((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING); ++ rmwl((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING); ++ rmwl((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING); + + /* Write final register values. */ +- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); +- writel(gcfg, par->dc_regs + DC_GENERAL_CFG); ++ rmwl(dcfg, par->dc_regs + DC_DISPLAY_CFG); ++ rmwl(gcfg, par->dc_regs + DC_GENERAL_CFG); + + par->vid_ops->configure_display(info); + +Index: linux-2.6.23.17/drivers/video/geode/display_gx.h +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/geode/display_gx.h ++++ linux-2.6.23.17/drivers/video/geode/display_gx.h +@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops; + #define GLD_MSR_CONFIG 0xC0002001 + #define GLD_MSR_CONFIG_DM_FP 0x40 + ++/* Used for memory dection on the OLPC */ ++#define GLIU0_P2D_RO0 0x10000029 ++ + /* Display controller registers */ + + #define DC_UNLOCK 0x00 +Index: linux-2.6.23.17/drivers/video/geode/geodefb.h +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/geode/geodefb.h ++++ linux-2.6.23.17/drivers/video/geode/geodefb.h +@@ -12,6 +12,10 @@ + #ifndef __GEODEFB_H__ + #define __GEODEFB_H__ + ++#define FB_POWER_STATE_OFF 0 ++#define FB_POWER_STATE_SUSPEND 1 ++#define FB_POWER_STATE_ON 2 ++ + struct geodefb_info; + + struct geode_dc_ops { +@@ -21,18 +25,24 @@ struct geode_dc_ops { + + struct geode_vid_ops { + void (*set_dclk)(struct fb_info *); ++ unsigned int (*get_dclk)(struct fb_info *); + void (*configure_display)(struct fb_info *); + int (*blank_display)(struct fb_info *, int blank_mode); + }; + + struct geodefb_par { + int enable_crt; ++ int fbactive; /* True if the current console is in KD_GRAPHICS mode */ + int panel_x; /* dimensions of an attached flat panel, non-zero => enable panel */ + int panel_y; ++ unsigned int curdclk; /* Used by GX to avoid unnessesary clock switching */ + void __iomem *dc_regs; + void __iomem *vid_regs; ++ void __iomem *gp_regs; + struct geode_dc_ops *dc_ops; + struct geode_vid_ops *vid_ops; ++ ++ int state; + }; + + #endif /* !__GEODEFB_H__ */ +Index: linux-2.6.23.17/drivers/video/geode/gxfb_core.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/geode/gxfb_core.c ++++ linux-2.6.23.17/drivers/video/geode/gxfb_core.c +@@ -30,12 +30,31 @@ + #include + #include + #include ++#include ++#include ++#include ++#include ++#include + + #include "geodefb.h" + #include "display_gx.h" + #include "video_gx.h" + ++#define FBIOSGAMMA _IOW('F', 0x20, void *) ++#define FBIOGGAMMA _IOW('F', 0x21, void *) ++ ++#ifdef DEBUG ++ ++#define FBIODUMPGP _IOW('F', 0x22, void *) ++#define FBIODUMPDC _IOW('F', 0x23, void *) ++#define FBIODUMPVP _IOW('F', 0x24, void *) ++#define FBIODUMPFP _IOW('F', 0x25, void *) ++ ++#endif ++ + static char *mode_option; ++static int noclear; ++struct fb_info *gxfb_info; + + /* Modes relevant to the GX (taken from modedb.c) */ + static const struct fb_videomode gx_modedb[] __initdata = { +@@ -103,8 +122,20 @@ static const struct fb_videomode gx_mode + { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1200x900-75 - CRT timings for the OLPC mode */ ++ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3, ++ 0, FB_VMODE_NONINTERLACED, 0 } + }; + ++#ifdef CONFIG_OLPC ++static const struct fb_videomode gx_dcon_modedb[] __initdata = { ++ /* The only mode the DCON has is 1200x900 */ ++ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, ++ 0, FB_VMODE_NONINTERLACED, 0 } ++}; ++#endif ++ ++ + static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) + { + if (var->xres > 1600 || var->yres > 1200) +@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_ + return 0; + } + +-static int gxfb_set_par(struct fb_info *info) ++int gxfb_set_par(struct fb_info *info) + { + struct geodefb_par *par = info->par; + +@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, st + return par->vid_ops->blank_display(info, blank_mode); + } + ++static int fbsize; ++ + static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev) + { + struct geodefb_par *par = info->par; +- int fb_len; + int ret; + + ret = pci_enable_device(dev); + if (ret < 0) + return ret; + ++ ret = pci_request_region(dev, 1, "gxfb (graphics processor)"); ++ if (ret < 0) ++ return ret; ++ ++ par->gp_regs = ioremap(pci_resource_start(dev, 1), ++ pci_resource_len(dev, 1)); ++ if (!par->gp_regs) ++ return -ENOMEM; ++ + ret = pci_request_region(dev, 3, "gxfb (video processor)"); + if (ret < 0) + return ret; +@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory( + ret = pci_request_region(dev, 0, "gxfb (framebuffer)"); + if (ret < 0) + return ret; +- if ((fb_len = gx_frame_buffer_size()) < 0) +- return -ENOMEM; ++ ++ /* If the fbsize wasn't specified then try to probe it */ ++ ++ if (!fbsize) { ++ fbsize = gx_frame_buffer_size(); ++ if (fbsize == 0) ++ return -ENOMEM; ++ } ++ + info->fix.smem_start = pci_resource_start(dev, 0); +- info->fix.smem_len = fb_len; ++ info->fix.smem_len = fbsize; + info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); + if (!info->screen_base) + return -ENOMEM; + +- /* Set the 16MB aligned base address of the graphics memory region ++ /* Set the 16MiB aligned base address of the graphics memory region + * in the display controller */ + + writel(info->fix.smem_start & 0xFF000000, + par->dc_regs + DC_GLIU0_MEM_OFFSET); + +- dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n", ++ dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n", + info->fix.smem_len / 1024, info->fix.smem_start); + + return 0; + } + ++static int gxfb_ioctl( struct fb_info *info, unsigned int cmd, ++ unsigned long arg) ++{ ++ unsigned int gamma[GXFB_GAMMA_DWORDS]; ++ int ret = -EINVAL; ++ struct geodefb_par *par = info->par; ++ int i; ++ ++ switch(cmd) { ++ case FBIOSGAMMA: ++ /* Read the gamma information from the user - 256 dwords */ ++ ++ if (copy_from_user(gamma, (void * __user) arg, GXFB_GAMMA_SIZE)) ++ return -EFAULT; ++ ++ writel(0, par->vid_regs + GX_GAR); ++ ++ /* Sequential writes to the data register will increment the ++ address automatically */ ++ ++ for(i = 0; i < GXFB_GAMMA_DWORDS; i++) ++ writel(gamma[i] & 0xFFFFFF, par->vid_regs + GX_GDR); ++ ++ writel(readl(par->vid_regs + GX_MISC) & ~GX_MISC_GAM_EN, ++ par->vid_regs + GX_MISC); ++ ++ ret = 0; ++ break; ++ ++ case FBIOGGAMMA: ++ if (readl(par->vid_regs + GX_MISC) & GX_MISC_GAM_EN) ++ return -EINVAL; ++ ++ memset(gamma, 0, GXFB_GAMMA_SIZE); ++ writel(0, par->vid_regs + GX_GAR); ++ ++ for(i = 0; i < GXFB_GAMMA_DWORDS;i++) ++ gamma[i] = readl(par->vid_regs + GX_GDR); ++ ++ if (copy_to_user((void * __user) arg, gamma, GXFB_GAMMA_SIZE)) ++ ret = -EFAULT; ++ else ++ ret = 0; ++ ++ break; ++ ++#ifdef DEBUG ++ case FBIODUMPGP: ++ ret = 0; ++ dump_regs(info, 0); ++ break; ++ ++ case FBIODUMPDC: ++ ret = 0; ++ dump_regs(info, 1); ++ break; ++ ++ case FBIODUMPVP: ++ ret = 0; ++ dump_regs(info, 2); ++ break; ++ ++ case FBIODUMPFP: ++ ret = 0; ++ dump_regs(info, 3); ++ break; ++#endif ++ } ++ ++ return ret; ++} ++ + static struct fb_ops gxfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = gxfb_check_var, + .fb_set_par = gxfb_set_par, + .fb_setcolreg = gxfb_setcolreg, + .fb_blank = gxfb_blank, ++ .fb_ioctl = gxfb_ioctl, + /* No HW acceleration for now. */ + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, ++ .fb_powerdown = gxfb_powerdown, ++ .fb_powerup = gxfb_powerup, + }; + + static struct fb_info * __init gxfb_init_fbinfo(struct device *dev) +@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init + return info; + } + +-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id) ++static int gxfb_console_notify(struct notifier_block *self, ++ unsigned long action, void *data) ++{ ++ if (gxfb_info != NULL) { ++ struct geodefb_par *par = gxfb_info->par; ++ par->fbactive = (action == CONSOLE_EVENT_SWITCH_TEXT) ? 0 : 1; ++ } ++ ++ return NOTIFY_OK; ++} ++ ++static struct notifier_block gxfb_console_notifier = { ++ .notifier_call = gxfb_console_notify ++}; ++ ++#ifdef CONFIG_PM ++ ++static int gxfb_suspend(struct pci_dev *pdev, pm_message_t state) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ struct geodefb_par *par = info->par; ++ ++ if (pdev->dev.power.power_state.event == state.event) ++ return 0; ++ ++ if (state.event == PM_EVENT_SUSPEND) { ++ ++ acquire_console_sem(); ++ gxfb_powerdown(info); ++ ++ par->state = FB_POWER_STATE_OFF; ++ fb_set_suspend(info, 1); ++ ++ release_console_sem(); ++ } ++ ++ pdev->dev.power.power_state = state; ++ return 0; ++} ++ ++static int gxfb_resume(struct pci_dev *pdev) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ ++ acquire_console_sem(); ++ ++ /* Turn the engine completely on */ ++ ++ if (gxfb_powerup(info)) ++ printk(KERN_ERR "gxfb: Powerup failed\n"); ++ ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ ++ pdev->dev.power.power_state = PMSG_ON; ++ return 0; ++} ++#endif ++ ++static int __init gxfb_probe(struct pci_dev *pdev, ++ const struct pci_device_id *id) + { + struct geodefb_par *par; +- struct fb_info *info; + int ret; + unsigned long val; + +- info = gxfb_init_fbinfo(&pdev->dev); +- if (!info) ++ struct fb_videomode *modedb_ptr; ++ int modedb_size; ++ ++ gxfb_info = gxfb_init_fbinfo(&pdev->dev); ++ if (gxfb_info == NULL) + return -ENOMEM; +- par = info->par; ++ ++ par = gxfb_info->par; + + /* GX display controller and GX video device. */ + par->dc_ops = &gx_dc_ops; + par->vid_ops = &gx_vid_ops; + +- if ((ret = gxfb_map_video_memory(info, pdev)) < 0) { ++ if ((ret = gxfb_map_video_memory(gxfb_info, pdev)) < 0) { + dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n"); + goto err; + } +@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_ + else + par->enable_crt = 1; + +- ret = fb_find_mode(&info->var, info, mode_option, +- gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16); ++ /* Get the current dotclock */ ++ ++ par->curdclk = (par->vid_ops->get_dclk) ? par->vid_ops->get_dclk(gxfb_info) : 0; ++ ++ /* We need to determine a display mode right now, so we will ++ * check to see if the DCON was previously detected by the BIOS ++ * and use that to make our mode database decision. ++ */ ++ ++ modedb_ptr = (struct fb_videomode *) gx_modedb; ++ modedb_size = ARRAY_SIZE(gx_modedb); ++ ++#ifdef CONFIG_OLPC ++ if (olpc_has_dcon()) { ++ modedb_ptr = (struct fb_videomode *) gx_dcon_modedb; ++ modedb_size = ARRAY_SIZE(gx_dcon_modedb); ++ } ++#endif ++ ++ ret = fb_find_mode(&gxfb_info->var, gxfb_info, mode_option, ++ modedb_ptr, modedb_size, NULL, 16); ++ + if (ret == 0 || ret == 4) { + dev_err(&pdev->dev, "could not find valid video mode\n"); + ret = -EINVAL; + goto err; + } + ++ /* Clear the screen of garbage, unless noclear was specified, ++ * in which case we assume the user knows what he is doing */ ++ ++ if (!noclear) ++ memset_io(gxfb_info->screen_base, 0, gxfb_info->fix.smem_len); ++ ++ gxfb_check_var(&gxfb_info->var, gxfb_info); ++ gxfb_set_par(gxfb_info); ++ ++ /* We are powered up */ ++ par->state = FB_POWER_STATE_ON; + +- /* Clear the frame buffer of garbage. */ +- memset_io(info->screen_base, 0, info->fix.smem_len); + +- gxfb_check_var(&info->var, info); +- gxfb_set_par(info); ++ console_event_register(&gxfb_console_notifier); + +- if (register_framebuffer(info) < 0) { ++ if (register_framebuffer(gxfb_info) < 0) { + ret = -EINVAL; + goto err; + } +- pci_set_drvdata(pdev, info); +- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id); ++ pci_set_drvdata(pdev, gxfb_info); ++ printk(KERN_INFO "fb%d: %s frame buffer device\n", gxfb_info->node, gxfb_info->fix.id); + return 0; + + err: +- if (info->screen_base) { +- iounmap(info->screen_base); ++ if (gxfb_info->screen_base) { ++ iounmap(gxfb_info->screen_base); + pci_release_region(pdev, 0); + } + if (par->vid_regs) { +@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_ + pci_release_region(pdev, 2); + } + +- if (info) +- framebuffer_release(info); ++ if (gxfb_info) ++ framebuffer_release(gxfb_info); ++ + return ret; + } + +@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev * + } + + static struct pci_device_id gxfb_id_table[] = { +- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO, +- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, +- 0xff0000, 0 }, ++ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) }, + { 0, } + }; + +@@ -410,22 +623,30 @@ static struct pci_driver gxfb_driver = { + .id_table = gxfb_id_table, + .probe = gxfb_probe, + .remove = gxfb_remove, ++#ifdef CONFIG_PM ++ .suspend = gxfb_suspend, ++ .resume = gxfb_resume ++#endif + }; + + #ifndef MODULE +-static int __init gxfb_setup(char *options) +-{ ++static int __init gxfb_setup(char *options) { + + char *opt; + + if (!options || !*options) + return 0; + +- while ((opt = strsep(&options, ",")) != NULL) { ++ while((opt = strsep(&options, ",")) != NULL) { + if (!*opt) + continue; + +- mode_option = opt; ++ if (!strncmp(opt, "fbsize:", 7)) ++ fbsize = simple_strtoul(opt+7, NULL, 0); ++ else if (!strcmp(opt, "noclear")) ++ noclear = 1; ++ else ++ mode_option = opt; + } + + return 0; +@@ -444,7 +665,6 @@ static int __init gxfb_init(void) + #endif + return pci_register_driver(&gxfb_driver); + } +- + static void __exit gxfb_cleanup(void) + { + pci_unregister_driver(&gxfb_driver); +@@ -456,5 +676,8 @@ module_exit(gxfb_cleanup); + module_param(mode_option, charp, 0); + MODULE_PARM_DESC(mode_option, "video mode (x[-][@])"); + ++module_param(fbsize, int, 0); ++MODULE_PARM_DESC(fbsize, "video memory size"); ++ + MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX"); + MODULE_LICENSE("GPL"); +Index: linux-2.6.23.17/drivers/video/geode/lxfb.h +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/geode/lxfb.h ++++ linux-2.6.23.17/drivers/video/geode/lxfb.h +@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *); + void lx_get_gamma(struct fb_info *, unsigned int *, int); + void lx_set_gamma(struct fb_info *, unsigned int *, int); + unsigned int lx_framebuffer_size(void); ++int lx_shutdown(struct fb_info *); ++int lx_powerup(struct fb_info *); + int lx_blank_display(struct fb_info *, int); + void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int, + unsigned int, unsigned int); + ++ ++ ++/* ioctl() defines */ ++ ++#define FBIOSGAMMA _IOW('F', 0x20, void *) ++#define FBIOGGAMMA _IOW('F', 0x21, void *) ++ ++/* General definitions */ ++#define LXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */ ++#define LXFB_GAMMA_SIZE (LXFB_GAMMA_DWORDS * sizeof(unsigned int)) ++ + /* MSRS */ + + #define MSR_LX_GLD_CONFIG 0x48002001 +Index: linux-2.6.23.17/drivers/video/geode/lxfb_core.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/geode/lxfb_core.c ++++ linux-2.6.23.17/drivers/video/geode/lxfb_core.c +@@ -22,6 +22,7 @@ + #include + #include + #include ++#include + + #include "lxfb.h" + +@@ -35,186 +36,84 @@ static int fbsize; + */ + + const struct fb_videomode geode_modedb[] __initdata = { +- /* 640x480-60 */ +- { NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2, ++ /* 640x480-60 VESA */ ++ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 640x480-75 VESA */ ++ { NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 640x480-85 VESA */ ++ { NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 800x600-60 VESA */ ++ { NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 800x600-75 VESA */ ++ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 800x600-85 VESA */ ++ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1024x768-60 VESA */ ++ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1024x768-75 VESA */ ++ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1024x768-85 VESA */ ++ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x960-60 VESA */ ++ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x960-85 VESA */ ++ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x1024-60 VESA */ ++ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x1024-75 VESA */ ++ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x1024-85 VESA */ ++ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x400-70 */ +- { NULL, 70, 640, 400, 39770, 40, 8, 28, 5, 96, 2, +- FB_SYNC_HOR_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-70 */ +- { NULL, 70, 640, 480, 35014, 88, 24, 15, 2, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-72 */ +- { NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-75 */ +- { NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-85 */ +- { NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-90 */ +- { NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-100 */ +- { NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-60 */ +- { NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-56 */ +- { NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-60 */ +- { NULL, 60, 800, 600, 25131, 72, 32, 23, 1, 136, 4, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-70 */ +- { NULL, 70, 800, 600, 21873, 120, 40, 21, 4, 80, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-72 */ +- { NULL, 72, 800, 600, 20052, 64, 56, 23, 37, 120, 6, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-75 */ +- { NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-85 */ +- { NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-90 */ +- { NULL, 90, 800, 600, 16648, 128, 40, 28, 1, 88, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-100 */ +- { NULL, 100, 800, 600, 14667, 136, 48, 27, 1, 88, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-60 */ +- { NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-60 */ +- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-70 */ +- { NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-72 */ +- { NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-75 */ +- { NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-85 */ +- { NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-90 */ +- { NULL, 90, 1024, 768, 9981, 176, 64, 37, 1, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-100 */ +- { NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-60 */ +- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-60 */ +- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-70 */ +- { NULL, 70, 1152, 864, 10254, 192, 72, 32, 8, 120, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-72 */ +- { NULL, 72, 1152, 864, 9866, 200, 72, 33, 7, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-75 */ +- { NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-85 */ +- { NULL, 85, 1152, 864, 8357, 200, 72, 37, 3, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-90 */ +- { NULL, 90, 1152, 864, 7719, 208, 80, 42, 9, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-100 */ +- { NULL, 100, 1152, 864, 6947, 208, 80, 48, 3, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-60 */ +- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-60 */ +- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-70 */ +- { NULL, 70, 1280, 1024, 7719, 224, 88, 38, 6, 136, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-72 */ +- { NULL, 72, 1280, 1024, 7490, 224, 88, 39, 7, 136, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-75 */ +- { NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-85 */ +- { NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-90 */ +- { NULL, 90, 1280, 1024, 5791, 240, 96, 51, 12, 144, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-100 */ +- { NULL, 100, 1280, 1024, 5212, 240, 96, 57, 6, 144, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-60 */ +- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-60 */ ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1600x1200-60 VESA */ + { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-70 */ +- { NULL, 70, 1600, 1200, 5291, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-72 */ +- { NULL, 72, 1600, 1200, 5053, 288, 112, 47, 13, 176, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-75 */ ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1600x1200-75 VESA */ + { NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-85 */ ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1600x1200-85 VESA */ + { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-90 */ +- { NULL, 90, 1600, 1200, 3981, 304, 128, 60, 1, 176, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-100 */ +- { NULL, 100, 1600, 1200, 3563, 304, 128, 67, 1, 176, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-60 */ +- { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-60 */ +- { NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-70 */ +- { NULL, 70, 1920, 1440, 3593, 360, 152, 55, 8, 208, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-72 */ +- { NULL, 72, 1920, 1440, 3472, 360, 152, 68, 4, 208, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-75 */ +- { NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-85 */ +- { NULL, 85, 1920, 1440, 2929, 368, 152, 68, 1, 216, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1200x900-75 - CRT timings for the OLPC mode */ ++ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3, ++ 0, FB_VMODE_NONINTERLACED, 0 } + }; + ++#ifdef CONFIG_OLPC ++const struct fb_videomode olpc_dcon_modedb[] __initdata = { ++ /* The only mode the DCON has is 1200x900 */ ++ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, 0 } ++}; ++#endif ++ + static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) + { + if (var->xres > 1920 || var->yres > 1440) +@@ -379,16 +278,55 @@ static int __init lxfb_map_video_memory( + return 0; + } + ++static int lxfb_set_gamma(struct fb_info *info, void * __user data) ++{ ++ unsigned int gamma[LXFB_GAMMA_DWORDS]; ++ ++ if (copy_from_user(gamma, data, LXFB_GAMMA_SIZE)) ++ return -EFAULT; ++ ++ lx_set_gamma(info, gamma, LXFB_GAMMA_SIZE); ++ return 0; ++} ++ ++static int lxfb_get_gamma(struct fb_info *info, void * __user data) ++{ ++ unsigned int gamma[LXFB_GAMMA_DWORDS]; ++ memset(gamma, 0, sizeof(gamma)); ++ ++ lx_get_gamma(info, gamma, LXFB_GAMMA_DWORDS); ++ ++ return copy_to_user(data, gamma, LXFB_GAMMA_SIZE) ? ++ -EFAULT : 0; ++} ++ ++static int lxfb_ioctl( struct fb_info *info, unsigned int cmd, ++ unsigned long arg) ++{ ++ switch(cmd) { ++ case FBIOSGAMMA: ++ return lxfb_set_gamma(info, (void * __user) arg); ++ ++ case FBIOGGAMMA: ++ return lxfb_get_gamma(info, (void * __user) arg); ++ } ++ ++ return -ENOTTY; ++} ++ + static struct fb_ops lxfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = lxfb_check_var, + .fb_set_par = lxfb_set_par, + .fb_setcolreg = lxfb_setcolreg, + .fb_blank = lxfb_blank, ++ .fb_ioctl = lxfb_ioctl, + /* No HW acceleration for now. */ + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, ++ .fb_powerdown = lx_shutdown, ++ .fb_powerup = lx_powerup, + }; + + static struct fb_info * __init lxfb_init_fbinfo(struct device *dev) +@@ -431,6 +369,45 @@ static struct fb_info * __init lxfb_init + return info; + } + ++#ifdef CONFIG_PM ++ ++static int lxfb_suspend(struct pci_dev *pdev, pm_message_t state) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ ++ if (pdev->dev.power.power_state.event == state.event) ++ return 0; ++ ++ if (state.event == PM_EVENT_SUSPEND) { ++ ++ acquire_console_sem(); ++ lx_shutdown(info); ++ fb_set_suspend(info, 1); ++ release_console_sem(); ++ } ++ ++ pdev->dev.power.power_state = state; ++ return 0; ++} ++ ++static int lxfb_resume(struct pci_dev *pdev) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ ++ acquire_console_sem(); ++ ++ /* Turn the engine completely on */ ++ ++ lx_powerup(info); ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ ++ pdev->dev.power.power_state = PMSG_ON; ++ return 0; ++} ++ ++#endif ++ + static int __init lxfb_probe(struct pci_dev *pdev, + const struct pci_device_id *id) + { +@@ -467,6 +444,13 @@ static int __init lxfb_probe(struct pci_ + modedb_ptr = (struct fb_videomode *) geode_modedb; + modedb_size = ARRAY_SIZE(geode_modedb); + ++#ifdef CONFIG_OLPC ++ if (olpc_has_dcon()) { ++ modedb_ptr = (struct fb_videomode *) olpc_dcon_modedb; ++ modedb_size = ARRAY_SIZE(olpc_dcon_modedb); ++ } ++#endif ++ + ret = fb_find_mode(&info->var, info, mode_option, + modedb_ptr, modedb_size, NULL, 16); + +@@ -556,6 +540,10 @@ static struct pci_driver lxfb_driver = { + .id_table = lxfb_id_table, + .probe = lxfb_probe, + .remove = lxfb_remove, ++#ifdef CONFIG_PM ++ .suspend = lxfb_suspend, ++ .resume = lxfb_resume ++#endif + }; + + #ifndef MODULE +Index: linux-2.6.23.17/drivers/video/geode/lxfb_ops.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/geode/lxfb_ops.c ++++ linux-2.6.23.17/drivers/video/geode/lxfb_ops.c +@@ -13,9 +13,13 @@ + #include + #include + #include ++#include + + #include "lxfb.h" + ++#define _GEODELX_ ++#include "geode_regs.h" ++ + /* TODO + * Support panel scaling + * Add acceleration +@@ -290,6 +294,19 @@ unsigned int lx_framebuffer_size(void) + { + unsigned int val; + ++#ifdef CONFIG_OLPC ++ if (machine_is_olpc() && !olpc_has_vsa()) { ++ u32 hi,lo; ++ rdmsr(MSR_LX_GLIU0_P2D_RO0, lo, hi); ++ ++ /* Top page number */ ++ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20); ++ val -= (lo & 0x000fffff); /* Subtract bottom page number */ ++ val += 1; /* Adjust page count */ ++ return (val << 12); ++ } ++#endif ++ + /* The frame buffer size is reported by a VSM in VSA II */ + /* Virtual Register Class = 0x02 */ + /* VG_MEM_SIZE (1MB units) = 0x00 */ +@@ -301,6 +318,34 @@ unsigned int lx_framebuffer_size(void) + return (val << 20); + } + ++void lx_set_gamma(struct fb_info *info, unsigned int *gamma, int len) ++{ ++ int i; ++ struct lxfb_par *par = info->par; ++ ++ writel(0, par->df_regs + DF_PAR); ++ ++ /* Sequential writes to the data register will increment the ++ address automatically */ ++ ++ for(i = 0; i < len; i++) ++ writel(gamma[i] & 0xFFFFFF, par->df_regs + DF_PDR); ++ ++ writel(readl(par->df_regs + DF_MISC) & ~DF_MISC_GAM_BYPASS, ++ par->df_regs + DF_MISC); ++} ++ ++void lx_get_gamma(struct fb_info *info, unsigned int *gamma, int len) ++{ ++ int i; ++ struct lxfb_par *par = info->par; ++ ++ writel(0, par->df_regs + DF_PAR); ++ ++ for(i = 0; i < len;i++) ++ gamma[i] = readl(par->df_regs + DF_PDR); ++} ++ + void lx_set_mode(struct fb_info *info) + { + struct lxfb_par *par = info->par; +@@ -313,6 +358,7 @@ void lx_set_mode(struct fb_info *info) + int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal; + + /* Unlock the DC registers */ ++ readl(par->dc_regs + DC_UNLOCK); + writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); + + lx_graphics_disable(info); +@@ -534,3 +580,285 @@ int lx_blank_display(struct fb_info *inf + + return 0; + } ++ ++static struct geoderegs saved_regs; ++ ++static void lx_save_regs(struct fb_info *info, struct geoderegs *regs) ++{ ++ struct lxfb_par *par = info->par; ++ int i; ++ ++ /* Wait for the command buffer to empty */ ++ while(!(readl(par->gp_regs + 0x44) & (1 << 4))); ++ ++ rdmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel); ++ rdmsrl(MSR_LX_GLCP_DOTPLL, regs->msr.dotpll); ++ rdmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg); ++ rdmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare); ++ ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE); ++ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE); ++ memcpy(regs->vp.b, par->df_regs, VP_REG_SIZE); ++ memcpy(regs->fp.b, par->df_regs + VP_FP_START, FP_REG_SIZE); ++ ++ /* Save the palettes */ ++ writel(0, par->dc_regs + 0x70); ++ ++ for(i = 0; i < DC_PAL_SIZE; i++) ++ regs->pal[i] = readl(par->dc_regs + 0x74); ++ ++ writel(0, par->df_regs + 0x38); ++ ++ for(i = 0; i <= 0xFF; i++) ++ regs->gamma[i] = readl(par->df_regs + 0x40); ++} ++ ++static void lx_restore_regs(struct fb_info *info, struct geoderegs *regs) ++{ ++ struct lxfb_par *par = info->par; ++ u32 val, i; ++ ++ /* == DOTPLL == */ ++ ++ lx_set_dotpll((u32) (regs->msr.dotpll >> 32)); ++ ++ /* MSRs */ ++ ++ wrmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg); ++ ++ /* == GP == */ ++ ++ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00); ++ writel(regs->gp.r.src_offset, par->gp_regs + 0x04); ++ writel(regs->gp.r.stride, par->gp_regs + 0x08); ++ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C); ++ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10); ++ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14); ++ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18); ++ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C); ++ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20); ++ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24); ++ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28); ++ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C); ++ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30); ++ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34); ++ ++ /* Writing to these registers would cause a blt to happen */ ++ /* 0x38, 0x3c, 0x40 */ ++ ++ /* Status register (0x44) is read only */ ++ ++ writel(regs->gp.r.hst_src, par->gp_regs + 0x48); ++ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c); ++ writel(regs->gp.r.cmd_top, par->gp_regs + 0x50); ++ writel(regs->gp.r.cmd_bot, par->gp_regs + 0x54); ++ writel(regs->gp.r.cmd_read, par->gp_regs + 0x58); ++ writel(regs->gp.r.cmd_write, par->gp_regs + 0x5C); ++ writel(regs->gp.r.ch3_offset, par->gp_regs + 0x60); ++ writel(regs->gp.r.ch3_mode_str, par->gp_regs + 0x64); ++ writel(regs->gp.r.ch3_width, par->gp_regs + 0x6C); ++ writel(regs->gp.r.ch3_hsrc, par->gp_regs + 0x70); ++ ++ /* FIXME: Restore the LUT data here */ ++ ++ writel(regs->gp.r.int_cntrl, par->gp_regs + 0x70); ++ ++ /* == DC == */ ++ ++ /* Write the unlock value */ ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ /* Write the palette data first */ ++ ++ writel(0, par->dc_regs + 0x70); ++ ++ for(i = 0; i < DC_PAL_SIZE; i++) ++ writel(regs->pal[i], par->dc_regs + 0x74); ++ ++ /* MSRs */ ++ wrmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare); ++ ++ /* Write the gcfg register without the enables */ ++ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04); ++ ++ /* Write the vcfg register without the enables */ ++ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08); ++ ++ /* Write the rest of the active registers */ ++ writel(regs->dc.r.arb, par->dc_regs + 0x0C); ++ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10); ++ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14); ++ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18); ++ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C); ++ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20); ++ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24); ++ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28); ++ writel(regs->dc.r.dctop, par->dc_regs + 0x2c); ++ writel(regs->dc.r.line_size, par->dc_regs + 0x30); ++ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34); ++ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38); ++ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40); ++ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44); ++ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48); ++ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50); ++ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54); ++ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58); ++ writel(regs->dc.r.fbactive, par->dc_regs + 0x5c); ++ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60); ++ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64); ++ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68); ++ ++ /* Skip register 0x6C (line_cnt), 0x70/0x74 (palette), ++ 0x78 (diagnostic), and 0x7c (diagnostic) ++ */ ++ ++ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80); ++ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84); ++ writel(regs->dc.r.dv_ctl, par->dc_regs + 0x88); ++ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C); ++ ++ writel(regs->dc.r.gfx_scale, par->dc_regs + 0x90); ++ writel(regs->dc.r.irq_filt_ctl, par->dc_regs + 0x94); ++ writel(regs->dc.r.filt_coeff1, par->dc_regs + 0x98); ++ writel(regs->dc.r.filt_coeff2, par->dc_regs + 0x9C); ++ writel(regs->dc.r.vbi_event_ctl, par->dc_regs + 0xA0); ++ ++ writel(regs->dc.r.vbi_odd_ctl, par->dc_regs + 0xA4); ++ writel(regs->dc.r.vbi_hor, par->dc_regs + 0xA8); ++ writel(regs->dc.r.vbi_ln_odd, par->dc_regs + 0xAC); ++ writel(regs->dc.r.vbi_ln_event, par->dc_regs + 0xB0); ++ writel(regs->dc.r.vbi_pitch, par->dc_regs + 0xB4); ++ writel(regs->dc.r.clr_key, par->dc_regs + 0xB8); ++ writel(regs->dc.r.clr_key_mask, par->dc_regs + 0xBC); ++ ++ writel(regs->dc.r.clr_key_x, par->dc_regs + 0xC0); ++ writel(regs->dc.r.clr_key_y, par->dc_regs + 0xC4); ++ writel(regs->dc.r.irq, par->dc_regs + 0xC8); ++ writel(regs->dc.r.genlk_ctrl, par->dc_regs + 0xD4); ++ ++ writel(regs->dc.r.vid_even_y_st_offset, par->dc_regs + 0xD8); ++ writel(regs->dc.r.vid_even_u_st_offset, par->dc_regs + 0xDC); ++ writel(regs->dc.r.vid_even_v_st_offset, par->dc_regs + 0xE0); ++ ++ writel(regs->dc.r.v_active_even_timing, par->dc_regs + 0xE4); ++ writel(regs->dc.r.v_blank_even_timing, par->dc_regs + 0xE8); ++ writel(regs->dc.r.v_sync_even_timing, par->dc_regs + 0xEC); ++ ++ /* == VP == */ ++ ++ /* MSR */ ++ wrmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel); ++ ++ /* Write gamma information first */ ++ ++ writel(0, par->df_regs + 0x38); ++ ++ for(i = 0; i <= 0xFF; i++) ++ writel((u32) regs->gamma[i], par->df_regs + 0x40); ++ ++ /* Don't enable video yet */ ++ writel((u32) regs->vp.r.vcfg & ~0x01, par->df_regs + 0x00); ++ ++ /* Don't enable the CRT yet */ ++ writel((u32) regs->vp.r.dcfg & ~0x0F, par->df_regs + 0x08); ++ ++ /* Write the rest of the VP registers */ ++ ++ writel((u32) regs->vp.r.vx, par->df_regs + 0x10); ++ writel((u32) regs->vp.r.vy, par->df_regs + 0x18); ++ writel((u32) regs->vp.r.vs, par->df_regs + 0x20); ++ writel((u32) regs->vp.r.vck, par->df_regs + 0x28); ++ writel((u32) regs->vp.r.vcm, par->df_regs + 0x30); ++ writel((u32) regs->vp.r.misc, par->df_regs + 0x50); ++ writel((u32) regs->vp.r.ccs, par->df_regs + 0x58); ++ writel((u32) regs->vp.r.vdc, par->df_regs + 0x78); ++ writel((u32) regs->vp.r.vco, par->df_regs + 0x80); ++ writel((u32) regs->vp.r.crc, par->df_regs + 0x88); ++ writel((u32) regs->vp.r.vde, par->df_regs + 0x98); ++ writel((u32) regs->vp.r.cck, par->df_regs + 0xA0); ++ writel((u32) regs->vp.r.ccm, par->df_regs + 0xA8); ++ writel((u32) regs->vp.r.cc1, par->df_regs + 0xB0); ++ writel((u32) regs->vp.r.cc2, par->df_regs + 0xB8); ++ writel((u32) regs->vp.r.a1x, par->df_regs + 0xC0); ++ writel((u32) regs->vp.r.a1y, par->df_regs + 0xC8); ++ writel((u32) regs->vp.r.a1c, par->df_regs + 0xD0); ++ writel((u32) regs->vp.r.a1t, par->df_regs + 0xD8); ++ writel((u32) regs->vp.r.a2x, par->df_regs + 0xE0); ++ writel((u32) regs->vp.r.a2y, par->df_regs + 0xE8); ++ writel((u32) regs->vp.r.a2c, par->df_regs + 0xF0); ++ writel((u32) regs->vp.r.a2t, par->df_regs + 0xF8); ++ writel((u32) regs->vp.r.a3x, par->df_regs + 0x100); ++ writel((u32) regs->vp.r.a3y, par->df_regs + 0x108); ++ writel((u32) regs->vp.r.a3c, par->df_regs + 0x110); ++ writel((u32) regs->vp.r.a3t, par->df_regs + 0x118); ++ writel((u32) regs->vp.r.vrr, par->df_regs + 0x120); ++ ++ writel((u32) regs->vp.r.vye, par->df_regs + 0x138); ++ writel((u32) regs->vp.r.a1ye, par->df_regs + 0x140); ++ writel((u32) regs->vp.r.a2ye, par->df_regs + 0x148); ++ writel((u32) regs->vp.r.a3ye, par->df_regs + 0x150); ++ ++ /* == FP == */ ++ ++ writel((u32) regs->fp.r.pt1, par->df_regs + 0x400); ++ writel((u32) regs->fp.r.pt2, par->df_regs + 0x408); ++ writel((u32) regs->fp.r.dfc, par->df_regs + 0x418); ++ writel(regs->fp.r.dca, par->df_regs + 0x448); ++ writel(regs->fp.r.dmd, par->df_regs + 0x450); ++ writel(regs->fp.r.crc, par->df_regs + 0x458); ++ ++ /* Final enables */ ++ ++ val = readl(par->df_regs + 0x410); ++ ++ /* Control the panel */ ++ if (regs->fp.r.pm & (1 << 24)) { ++ ++ if (!(val & 0x09)) ++ writel(regs->fp.r.pm, par->df_regs + 0x410); ++ } ++ else { ++ if (!(val & 0x05)) ++ writel(regs->fp.r.pm, par->df_regs + 0x410); ++ } ++ ++ /* Turn everything on */ ++ ++ writel(regs->dc.r.gcfg, par->dc_regs + 0x04); ++ writel((u32) regs->vp.r.vcfg, par->df_regs + 0x00); ++ writel((u32) regs->vp.r.dcfg, par->df_regs + 0x08); ++ writel(regs->dc.r.dcfg, par->dc_regs + 0x08); ++} ++ ++static int lx_power_on = 1; ++ ++int lx_shutdown(struct fb_info *info) ++{ ++ struct lxfb_par *par = info->par; ++ ++ if (lx_power_on == 0) ++ return 0; ++ ++ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); ++ lx_save_regs(info, &saved_regs); ++ lx_graphics_disable(info); ++ ++ lx_power_on = 0; ++ return 0; ++} ++ ++int lx_powerup(struct fb_info *info) ++{ ++ struct lxfb_par *par = info->par; ++ ++ if (lx_power_on == 1) ++ return 0; ++ ++ lx_restore_regs(info, &saved_regs); ++ writel(0, par->dc_regs + DC_UNLOCK); ++ ++ lx_power_on = 1; ++ return 0; ++} +Index: linux-2.6.23.17/drivers/video/geode/video_gx.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/geode/video_gx.c ++++ linux-2.6.23.17/drivers/video/geode/video_gx.c +@@ -16,10 +16,14 @@ + #include + #include + #include ++#include + + #include "geodefb.h" + #include "video_gx.h" ++#include "display_gx.h" + ++/* This structure is used to store the saved registers during suspend */ ++static struct geoderegs gx_saved_regs; + + /* + * Tables of register settings for various DOTCLKs. +@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_ + { 13888, POSTDIV3, 0x000007E1 }, /* 72.0000 */ + { 13426, PREMULT2, 0x00000F4A }, /* 74.4810 */ + { 13333, 0, 0x00000052 }, /* 75.0000 */ +- { 12698, 0, 0x00000056 }, /* 78.7500 */ ++ { 12698, 0, 0x00000056 }, /* 78.7500 */ + { 12500, POSTDIV3|PREMULT2, 0x00000709 }, /* 80.0000 */ + { 11135, PREMULT2, 0x00000262 }, /* 89.8000 */ + { 10582, 0, 0x000002D2 }, /* 94.5000 */ +@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_ + { 4357, 0, 0x0000057D }, /* 229.5000 */ + }; + +-static void gx_set_dclk_frequency(struct fb_info *info) ++void gx_set_dclk_frequency(struct fb_info *info) + { ++ struct geodefb_par *par = info->par; + const struct gx_pll_entry *pll_table; + int pll_table_len; + int i, best_i; +@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct + do { + rdmsrl(MSR_GLCP_DOTPLL, dotpll); + } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK)); ++ ++ par->curdclk = pll_table[best_i].dotpll_value; + } + +-static void +-gx_configure_tft(struct fb_info *info) ++/* Find out the current clock - we will use this information to avoid ++ re-programming it if we don't need to */ ++ ++unsigned int gx_get_dclk(struct fb_info *info) + { +- struct geodefb_par *par = info->par; +- unsigned long val; +- unsigned long fp; ++ const struct gx_pll_entry *pll_table; ++ int pll_table_len; ++ u64 dotpll; ++ int i; + +- /* Set up the DF pad select MSR */ ++ if (cpu_data->x86_mask == 1) { ++ pll_table = gx_pll_table_14MHz; ++ pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz); ++ } else { ++ pll_table = gx_pll_table_48MHz; ++ pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz); ++ } + +- rdmsrl(GX_VP_MSR_PAD_SELECT, val); +- val &= ~GX_VP_PAD_SELECT_MASK; +- val |= GX_VP_PAD_SELECT_TFT; +- wrmsrl(GX_VP_MSR_PAD_SELECT, val); ++ rdmsrl(MSR_GLCP_DOTPLL, dotpll); + +- /* Turn off the panel */ ++ for(i = 0; i < pll_table_len; i++) { ++ if (pll_table[i].dotpll_value == (u32) (dotpll >> 32)) ++ break; ++ } ++ ++ return (i == pll_table_len) ? 0 : pll_table[i].pixclock; ++} + +- fp = readl(par->vid_regs + GX_FP_PM); +- fp &= ~GX_FP_PM_P; +- writel(fp, par->vid_regs + GX_FP_PM); + +- /* Set timing 1 */ ++#define CMP(val, mask, res) (((val) & (mask)) == (res)) + +- fp = readl(par->vid_regs + GX_FP_PT1); +- fp &= GX_FP_PT1_VSIZE_MASK; +- fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT; +- writel(fp, par->vid_regs + GX_FP_PT1); ++static void ++gx_configure_tft(struct fb_info *info) { + +- /* Timing 2 */ +- /* Set bits that are always on for TFT */ ++ struct geodefb_par *par = info->par; ++ u32 val, fp = 0, fp1, fp2, sync = 0; + +- fp = 0x0F100000; ++ /* Set up the DF pad select MSR */ + +- /* Add sync polarity */ ++ rdmsrl(GX_VP_MSR_PAD_SELECT, val); ++ ++ if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) { ++ val &= ~GX_VP_PAD_SELECT_MASK; ++ val |= GX_VP_PAD_SELECT_TFT; ++ wrmsrl(GX_VP_MSR_PAD_SELECT, val); ++ } + + if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) +- fp |= GX_FP_PT2_VSP; ++ sync |= GX_FP_PT2_VSP; + + if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) +- fp |= GX_FP_PT2_HSP; ++ sync |= GX_FP_PT2_HSP; + +- writel(fp, par->vid_regs + GX_FP_PT2); ++ /* We only need to turn off the panel if something changed */ + +- /* Set the dither control */ +- writel(0x70, par->vid_regs + GX_FP_DFC); ++ fp1 = readl(par->vid_regs + GX_FP_PT1); ++ fp2 = readl(par->vid_regs + GX_FP_PT2); ++ ++ if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) || ++ (fp2 != (0x0F100000 | sync))) { ++ ++ /* Turn off the panel */ ++ ++#ifdef NOTUSED ++ /* Do we really need to turn off the panel? */ ++ /* Possibly - we have a glitch somewhere */ + +- /* Enable the FP data and power (in case the BIOS didn't) */ ++ fp = readl(par->vid_regs + GX_FP_PM); ++ fp &= ~GX_FP_PM_P; ++ writel(fp, par->vid_regs + GX_FP_PM); ++#endif + +- fp = readl(par->vid_regs + GX_DCFG); +- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN; +- writel(fp, par->vid_regs + GX_DCFG); ++ /* Timing 1 */ ++ fp1 &= GX_FP_PT1_VSIZE_MASK; ++ fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT; ++ writel(fp, par->vid_regs + GX_FP_PT1); + +- /* Unblank the panel */ ++ /* Timing 2 */ ++ writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2); ++ } ++ ++ /* Set the dither control */ ++ if (readl(par->vid_regs + GX_FP_DFC) != 0x70) { ++ writel(0x70, par->vid_regs + GX_FP_DFC); ++ } ++ ++ /* Turn on the panel */ + + fp = readl(par->vid_regs + GX_FP_PM); +- fp |= GX_FP_PM_P; +- writel(fp, par->vid_regs + GX_FP_PM); ++ ++ if (!(fp & 0x09)) ++ writel(fp | GX_FP_PM_P, par->vid_regs + GX_FP_PM); + } + ++#define DCFG_DEFAULT_VAL GX_DCFG_CRT_SYNC_SKW_DFLT | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN | \ ++GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN ++ + static void gx_configure_display(struct fb_info *info) + { + struct geodefb_par *par = info->par; +- u32 dcfg, misc; ++ u32 dcfg, misc, sync = 0; + + /* Set up the MISC register */ +- + misc = readl(par->vid_regs + GX_MISC); + +- /* Power up the DAC */ +- misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); ++ /* We leave gamma enabled if it was already enabled. ++ Although the hardware enables it without setting ++ up the gamma table, the BIOS or bootloader ought ++ to have either disabled it or loaded a table by now */ + +- /* Disable gamma correction */ +- misc |= GX_MISC_GAM_EN; + +- writel(misc, par->vid_regs + GX_MISC); + +- /* Write the display configuration */ +- dcfg = readl(par->vid_regs + GX_DCFG); ++ if (par->enable_crt) { ++ /* Power up the CRT DACs */ ++ if (misc & ( GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN)) { ++ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); ++ writel(misc, par->vid_regs + GX_MISC); ++ } + +- /* Disable hsync and vsync */ +- dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); +- writel(dcfg, par->vid_regs + GX_DCFG); ++ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) ++ sync |= GX_DCFG_CRT_HSYNC_POL; + +- /* Clear bits from existing mode. */ +- dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK +- | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL +- | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); ++ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) ++ sync |= GX_DCFG_CRT_VSYNC_POL; ++ } ++ else { ++ /* Turn off the CRT DACs in FP mode - we don't need them */ ++ if ((misc & (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN))) { ++ misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); ++ writel(misc, par->vid_regs + GX_MISC); ++ } ++ } + +- /* Set default sync skew. */ +- dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT; ++ /* Write the display configuration */ ++ dcfg = readl(par->vid_regs + GX_DCFG); + +- /* Enable hsync and vsync. */ +- dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN; ++ if (!CMP(dcfg, DCFG_DEFAULT_VAL | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL, ++ DCFG_DEFAULT_VAL | sync)) { + +- /* Sync polarities. */ +- if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) +- dcfg |= GX_DCFG_CRT_HSYNC_POL; +- if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) +- dcfg |= GX_DCFG_CRT_VSYNC_POL; ++ /* Disable hsync and vsync */ ++ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); ++ writel(dcfg, par->vid_regs + GX_DCFG); + +- /* Enable the display logic */ +- /* Set up the DACS to blank normally */ ++ /* Clear bits from existing mode. */ ++ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK ++ | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL ++ | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); + +- dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN; ++ /* Set default sync skew. */ ++ dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT; + +- /* Enable the external DAC VREF? */ ++ /* Enable hsync and vsync. */ ++ dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN; + +- writel(dcfg, par->vid_regs + GX_DCFG); ++ /* Enable the display logic */ ++ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN; ++ ++ writel(dcfg, par->vid_regs + GX_DCFG); ++ } + + /* Set up the flat panel (if it is enabled) */ + +@@ -289,6 +348,100 @@ static void gx_configure_display(struct + gx_configure_tft(info); + } + ++int gxfb_powerdown(struct fb_info *info) ++{ ++ struct geodefb_par *par = info->par; ++ ++ /* We're already suspended */ ++ ++ if (par->state != FB_POWER_STATE_ON) ++ return 0; ++ ++ /* Save the registers */ ++ gx_save_regs(info, &gx_saved_regs); ++ ++ /* Shut down the engine */ ++ ++ writel(gx_saved_regs.vp.r.vcfg & ~0x01, par->vid_regs + GX_VCFG); ++ writel(gx_saved_regs.vp.r.dcfg & ~0x0F, par->vid_regs + GX_DCFG); ++ ++ /* Turn off the flat panel unless we are attached to a DCON */ ++ if (!olpc_has_dcon()) ++ writel(gx_saved_regs.fp.r.pm & ~GX_FP_PM_P, par->vid_regs + GX_FP_PM); ++ ++ writel(0x4758, par->dc_regs + DC_UNLOCK); ++ ++ writel(gx_saved_regs.dc.r.gcfg & ~0x0F, ++ par->dc_regs + DC_GENERAL_CFG); ++ ++ writel(gx_saved_regs.dc.r.dcfg & ~0x19, ++ par->dc_regs + DC_DISPLAY_CFG); ++ ++ par->state = FB_POWER_STATE_SUSPEND; ++ ++ return 0; ++} ++ ++int gxfb_powerup(struct fb_info *info) ++{ ++ struct geodefb_par *par = info->par; ++ u32 val; ++ ++ if (par->state == FB_POWER_STATE_SUSPEND) { ++ ++ writel(gx_saved_regs.dc.r.dcfg, ++ par->dc_regs + DC_DISPLAY_CFG); ++ ++ writel(gx_saved_regs.vp.r.vcfg, par->vid_regs + GX_VCFG); ++ writel(gx_saved_regs.vp.r.dcfg, par->vid_regs + GX_DCFG); ++ ++ val = readl(par->vid_regs + GX_FP_PM); ++ ++ /* power up the panel if it needs it; we don't always power it down */ ++ if (!(val & 0x09)) { ++ writel(gx_saved_regs.fp.r.pm, par->vid_regs + GX_FP_PM); ++ mdelay(64); ++ } ++ } ++ ++ /* If the panel is currently on its way up, then wait up to 100ms ++ for it */ ++ ++ if (readl(par->vid_regs + GX_FP_PM) & 0x08) { ++ int i; ++ ++ for(i = 0; i < 10; i++) { ++ if (readl(par->vid_regs + GX_FP_PM) & 0x01) ++ break; ++ ++ mdelay(10); ++ } ++ ++ if (i == 10) ++ printk(KERN_ERR "gxfb: Panel power up timed out\n"); ++ } ++ ++ if (par->state == FB_POWER_STATE_ON) ++ return 0; ++ ++ switch(par->state) { ++ case FB_POWER_STATE_OFF: ++ gx_restore_regs(info, &gx_saved_regs); ++ break; ++ ++ case FB_POWER_STATE_SUSPEND: ++ /* Do this because it will turn on the FIFO which will ++ start the line count */ ++ writel(gx_saved_regs.dc.r.gcfg, ++ par->dc_regs + DC_GENERAL_CFG); ++ writel(0x0, par->dc_regs + DC_UNLOCK); ++ break; ++ } ++ ++ par->state = FB_POWER_STATE_ON; ++ return 0; ++} ++ + static int gx_blank_display(struct fb_info *info, int blank_mode) + { + struct geodefb_par *par = info->par; +@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_in + default: + return -EINVAL; + } ++ + dcfg = readl(par->vid_regs + GX_DCFG); + dcfg &= ~(GX_DCFG_DAC_BL_EN + | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN); +@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_in + dcfg |= GX_DCFG_VSYNC_EN; + writel(dcfg, par->vid_regs + GX_DCFG); + +- /* Power on/off flat panel. */ ++ /* Power on/off flat panel */ + + if (par->enable_crt == 0) { + fp_pm = readl(par->vid_regs + GX_FP_PM); +@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_in + return 0; + } + ++extern struct fb_info *gxfb_info; ++ ++/* This function controls the flatpanel power sequencing - this is used ++ by the OLPC power management engine to enable the FP sequencing much ++ earlier in the resume process ++*/ ++ ++void gxfb_flatpanel_control(int state) ++{ ++ struct geodefb_par *par = gxfb_info->par; ++ u32 val, fp = readl(par->vid_regs + GX_FP_PM); ++ val = fp; ++ ++ /* Turn on the panel if it isn't aleady */ ++ ++ if (state) { ++ if (!(val & 0x01)) ++ val |= GX_FP_PM_P; ++ } ++ else { ++ if (!(val & 0x02)) ++ val &= ~GX_FP_PM_P; ++ } ++ ++ if (val != fp) ++ writel(val, par->vid_regs + GX_FP_PM); ++} ++ + struct geode_vid_ops gx_vid_ops = { + .set_dclk = gx_set_dclk_frequency, ++ .get_dclk = gx_get_dclk, + .configure_display = gx_configure_display, + .blank_display = gx_blank_display, + }; +Index: linux-2.6.23.17/drivers/video/geode/video_gx.h +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/geode/video_gx.h ++++ linux-2.6.23.17/drivers/video/geode/video_gx.h +@@ -11,6 +11,8 @@ + #ifndef __VIDEO_GX_H__ + #define __VIDEO_GX_H__ + ++#include "geode_regs.h" ++ + extern struct geode_vid_ops gx_vid_ops; + + /* GX Flatpanel control MSR */ +@@ -20,6 +22,8 @@ extern struct geode_vid_ops gx_vid_ops; + + /* Geode GX video processor registers */ + ++#define GX_VCFG 0x0000 ++ + #define GX_DCFG 0x0008 + # define GX_DCFG_CRT_EN 0x00000001 + # define GX_DCFG_HSYNC_EN 0x00000002 +@@ -42,6 +46,14 @@ extern struct geode_vid_ops gx_vid_ops; + #define GX_MISC_DAC_PWRDN 0x00000400 + #define GX_MISC_A_PWRDN 0x00000800 + ++/* Gamma correction RAM - address and data registers */ ++ ++#define GX_GAR 0x038 ++#define GX_GDR 0x040 ++ ++#define GXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */ ++#define GXFB_GAMMA_SIZE (GXFB_GAMMA_DWORDS * sizeof(unsigned int)) ++ + /* Geode GX flat panel display control registers */ + + #define GX_FP_PT1 0x0400 +@@ -69,4 +81,13 @@ extern struct geode_vid_ops gx_vid_ops; + # define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull) + # define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull) + ++int gxfb_powerdown(struct fb_info *info); ++int gxfb_powerup(struct fb_info *info); ++ ++void gx_set_dclk_frequency(struct fb_info *info); ++unsigned int gx_get_dclk(struct fb_info *info); ++ ++void gx_save_regs(struct fb_info *info, struct geoderegs *regs); ++void gx_restore_regs(struct fb_info *info, struct geoderegs *regs); ++ + #endif /* !__VIDEO_GX_H__ */ +Index: linux-2.6.23.17/drivers/video/modedb.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/video/modedb.c ++++ linux-2.6.23.17/drivers/video/modedb.c +@@ -33,6 +33,8 @@ const char *global_mode_option; + * Standard video mode definitions (taken from XFree86) + */ + ++#define DEFAULT_MODEDB_INDEX 0 ++ + static const struct fb_videomode modedb[] = { + { + /* 640x400 @ 70 Hz, 31.5 kHz hsync */ +@@ -504,7 +506,8 @@ int fb_find_mode(struct fb_var_screeninf + } + + if (!default_mode) +- default_mode = &db[0]; ++ default_mode = (db == modedb) ? ++ &modedb[DEFAULT_MODEDB_INDEX] : &db[0]; + + if (!default_bpp) + default_bpp = 8; +Index: linux-2.6.23.17/fs/Kconfig +=================================================================== +--- linux-2.6.23.17.orig/fs/Kconfig ++++ linux-2.6.23.17/fs/Kconfig +@@ -1003,6 +1003,23 @@ config HUGETLBFS + config HUGETLB_PAGE + def_bool HUGETLBFS + ++config PROMFS_FS ++ tristate "PromFS IEEE 1275 file system support" ++ depends on SPARC || PPC || OLPC ++ help ++ PromFS is a file system interface to various IEEE-1275 compatible ++ firmwares. If you have such a firmware (Sparc64, PowerPC, and ++ some other architectures and embedded systems have such firmwares, ++ with names like "OpenBoot (tm)" and "OpenFirmware"), say Y here ++ to be able to access the firmware's device-tree from Linux. ++ ++ The firmware device-tree is available as a virtual file system, ++ can be mounted under /prom with the command "mount -t promfs ++ none /prom". ++ ++ To compile PromFS support as a module, choose M here; the module ++ will be called promfs. If unsure, choose M. ++ + config RAMFS + bool + default y +@@ -1229,6 +1246,14 @@ config JFFS2_FS_WRITEBUFFER + - NOR flash with transparent ECC + - DataFlash + ++config JFFS2_FS_WBUF_VERIFY ++ bool "Verify JFFS2 write-buffer reads" ++ depends on JFFS2_FS_WRITEBUFFER ++ default n ++ help ++ This causes JFFS2 to read back every page written through the ++ write-buffer, and check for errors. ++ + config JFFS2_SUMMARY + bool "JFFS2 summary support (EXPERIMENTAL)" + depends on JFFS2_FS && EXPERIMENTAL +@@ -1299,52 +1324,52 @@ config JFFS2_ZLIB + select ZLIB_DEFLATE + depends on JFFS2_FS + default y +- help +- Zlib is designed to be a free, general-purpose, legally unencumbered, +- lossless data-compression library for use on virtually any computer +- hardware and operating system. See for +- further information. ++ help ++ Zlib is designed to be a free, general-purpose, legally unencumbered, ++ lossless data-compression library for use on virtually any computer ++ hardware and operating system. See for ++ further information. + +- Say 'Y' if unsure. ++ Say 'Y' if unsure. + + config JFFS2_RTIME + bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS + default y +- help +- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. ++ help ++ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. + + config JFFS2_RUBIN + bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS + default n +- help +- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. ++ help ++ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. + + choice +- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS +- default JFFS2_CMODE_PRIORITY +- depends on JFFS2_FS +- help +- You can set here the default compression mode of JFFS2 from +- the available compression modes. Don't touch if unsure. ++ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS ++ default JFFS2_CMODE_PRIORITY ++ depends on JFFS2_FS ++ help ++ You can set here the default compression mode of JFFS2 from ++ the available compression modes. Don't touch if unsure. + + config JFFS2_CMODE_NONE +- bool "no compression" +- help +- Uses no compression. ++ bool "no compression" ++ help ++ Uses no compression. + + config JFFS2_CMODE_PRIORITY +- bool "priority" +- help +- Tries the compressors in a predefined order and chooses the first +- successful one. ++ bool "priority" ++ help ++ Tries the compressors in a predefined order and chooses the first ++ successful one. + + config JFFS2_CMODE_SIZE +- bool "size (EXPERIMENTAL)" +- help +- Tries all compressors and chooses the one which has the smallest +- result. ++ bool "size (EXPERIMENTAL)" ++ help ++ Tries all compressors and chooses the one which has the smallest ++ result. + + endchoice + +Index: linux-2.6.23.17/fs/Makefile +=================================================================== +--- linux-2.6.23.17.orig/fs/Makefile ++++ linux-2.6.23.17/fs/Makefile +@@ -110,6 +110,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/ + obj-$(CONFIG_FUSE_FS) += fuse/ + obj-$(CONFIG_UDF_FS) += udf/ + obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/ ++obj-$(CONFIG_PROMFS_FS) += promfs/ + obj-$(CONFIG_JFS_FS) += jfs/ + obj-$(CONFIG_XFS_FS) += xfs/ + obj-$(CONFIG_9P_FS) += 9p/ +Index: linux-2.6.23.17/fs/jffs2/background.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/background.c ++++ linux-2.6.23.17/fs/jffs2/background.c +@@ -23,8 +23,8 @@ static int jffs2_garbage_collect_thread( + void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c) + { + spin_lock(&c->erase_completion_lock); +- if (c->gc_task && jffs2_thread_should_wake(c)) +- send_sig(SIGHUP, c->gc_task, 1); ++ if (c->gc_task && jffs2_thread_should_wake(c)) ++ send_sig(SIGHUP, c->gc_task, 1); + spin_unlock(&c->erase_completion_lock); + } + +Index: linux-2.6.23.17/fs/jffs2/compr.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/compr.c ++++ linux-2.6.23.17/fs/jffs2/compr.c +@@ -5,7 +5,7 @@ + * Created by Arjan van de Ven + * + * Copyright © 2004 Ferenc Havasi , +- * University of Szeged, Hungary ++ * University of Szeged, Hungary + * + * For licensing information, see the file 'LICENCE' in this directory. + * +@@ -43,121 +43,122 @@ static uint32_t none_stat_compr_blocks=0 + * *datalen accordingly to show the amount of data which were compressed. + */ + uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, +- unsigned char *data_in, unsigned char **cpage_out, +- uint32_t *datalen, uint32_t *cdatalen) ++ unsigned char *data_in, unsigned char **cpage_out, ++ uint32_t *datalen, uint32_t *cdatalen) + { + int ret = JFFS2_COMPR_NONE; +- int compr_ret; +- struct jffs2_compressor *this, *best=NULL; +- unsigned char *output_buf = NULL, *tmp_buf; +- uint32_t orig_slen, orig_dlen; +- uint32_t best_slen=0, best_dlen=0; +- +- switch (jffs2_compression_mode) { +- case JFFS2_COMPR_MODE_NONE: +- break; +- case JFFS2_COMPR_MODE_PRIORITY: +- output_buf = kmalloc(*cdatalen,GFP_KERNEL); +- if (!output_buf) { +- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n"); +- goto out; +- } +- orig_slen = *datalen; +- orig_dlen = *cdatalen; +- spin_lock(&jffs2_compressor_list_lock); +- list_for_each_entry(this, &jffs2_compressor_list, list) { +- /* Skip decompress-only backwards-compatibility and disabled modules */ +- if ((!this->compress)||(this->disabled)) +- continue; +- +- this->usecount++; +- spin_unlock(&jffs2_compressor_list_lock); +- *datalen = orig_slen; +- *cdatalen = orig_dlen; +- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL); +- spin_lock(&jffs2_compressor_list_lock); +- this->usecount--; +- if (!compr_ret) { +- ret = this->compr; +- this->stat_compr_blocks++; +- this->stat_compr_orig_size += *datalen; +- this->stat_compr_new_size += *cdatalen; +- break; +- } +- } +- spin_unlock(&jffs2_compressor_list_lock); +- if (ret == JFFS2_COMPR_NONE) kfree(output_buf); +- break; +- case JFFS2_COMPR_MODE_SIZE: +- orig_slen = *datalen; +- orig_dlen = *cdatalen; +- spin_lock(&jffs2_compressor_list_lock); +- list_for_each_entry(this, &jffs2_compressor_list, list) { +- /* Skip decompress-only backwards-compatibility and disabled modules */ +- if ((!this->compress)||(this->disabled)) +- continue; +- /* Allocating memory for output buffer if necessary */ +- if ((this->compr_buf_sizecompr_buf)) { +- spin_unlock(&jffs2_compressor_list_lock); +- kfree(this->compr_buf); +- spin_lock(&jffs2_compressor_list_lock); +- this->compr_buf_size=0; +- this->compr_buf=NULL; +- } +- if (!this->compr_buf) { +- spin_unlock(&jffs2_compressor_list_lock); +- tmp_buf = kmalloc(orig_dlen,GFP_KERNEL); +- spin_lock(&jffs2_compressor_list_lock); +- if (!tmp_buf) { +- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen); +- continue; +- } +- else { +- this->compr_buf = tmp_buf; +- this->compr_buf_size = orig_dlen; +- } +- } +- this->usecount++; +- spin_unlock(&jffs2_compressor_list_lock); +- *datalen = orig_slen; +- *cdatalen = orig_dlen; +- compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL); +- spin_lock(&jffs2_compressor_list_lock); +- this->usecount--; +- if (!compr_ret) { +- if ((!best_dlen)||(best_dlen>*cdatalen)) { +- best_dlen = *cdatalen; +- best_slen = *datalen; +- best = this; +- } +- } +- } +- if (best_dlen) { +- *cdatalen = best_dlen; +- *datalen = best_slen; +- output_buf = best->compr_buf; +- best->compr_buf = NULL; +- best->compr_buf_size = 0; +- best->stat_compr_blocks++; +- best->stat_compr_orig_size += best_slen; +- best->stat_compr_new_size += best_dlen; +- ret = best->compr; +- } +- spin_unlock(&jffs2_compressor_list_lock); +- break; +- default: +- printk(KERN_ERR "JFFS2: unknow compression mode.\n"); +- } ++ int compr_ret; ++ struct jffs2_compressor *this, *best=NULL; ++ unsigned char *output_buf = NULL, *tmp_buf; ++ uint32_t orig_slen, orig_dlen; ++ uint32_t best_slen=0, best_dlen=0; ++ ++ switch (jffs2_compression_mode) { ++ case JFFS2_COMPR_MODE_NONE: ++ break; ++ case JFFS2_COMPR_MODE_PRIORITY: ++ output_buf = kmalloc(*cdatalen,GFP_KERNEL); ++ if (!output_buf) { ++ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n"); ++ goto out; ++ } ++ orig_slen = *datalen; ++ orig_dlen = *cdatalen; ++ spin_lock(&jffs2_compressor_list_lock); ++ list_for_each_entry(this, &jffs2_compressor_list, list) { ++ /* Skip decompress-only backwards-compatibility and disabled modules */ ++ if ((!this->compress)||(this->disabled)) ++ continue; ++ ++ this->usecount++; ++ spin_unlock(&jffs2_compressor_list_lock); ++ *datalen = orig_slen; ++ *cdatalen = orig_dlen; ++ compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL); ++ spin_lock(&jffs2_compressor_list_lock); ++ this->usecount--; ++ if (!compr_ret) { ++ ret = this->compr; ++ this->stat_compr_blocks++; ++ this->stat_compr_orig_size += *datalen; ++ this->stat_compr_new_size += *cdatalen; ++ break; ++ } ++ } ++ spin_unlock(&jffs2_compressor_list_lock); ++ if (ret == JFFS2_COMPR_NONE) ++ kfree(output_buf); ++ break; ++ case JFFS2_COMPR_MODE_SIZE: ++ orig_slen = *datalen; ++ orig_dlen = *cdatalen; ++ spin_lock(&jffs2_compressor_list_lock); ++ list_for_each_entry(this, &jffs2_compressor_list, list) { ++ /* Skip decompress-only backwards-compatibility and disabled modules */ ++ if ((!this->compress)||(this->disabled)) ++ continue; ++ /* Allocating memory for output buffer if necessary */ ++ if ((this->compr_buf_sizecompr_buf)) { ++ spin_unlock(&jffs2_compressor_list_lock); ++ kfree(this->compr_buf); ++ spin_lock(&jffs2_compressor_list_lock); ++ this->compr_buf_size=0; ++ this->compr_buf=NULL; ++ } ++ if (!this->compr_buf) { ++ spin_unlock(&jffs2_compressor_list_lock); ++ tmp_buf = kmalloc(orig_dlen,GFP_KERNEL); ++ spin_lock(&jffs2_compressor_list_lock); ++ if (!tmp_buf) { ++ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen); ++ continue; ++ } ++ else { ++ this->compr_buf = tmp_buf; ++ this->compr_buf_size = orig_dlen; ++ } ++ } ++ this->usecount++; ++ spin_unlock(&jffs2_compressor_list_lock); ++ *datalen = orig_slen; ++ *cdatalen = orig_dlen; ++ compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL); ++ spin_lock(&jffs2_compressor_list_lock); ++ this->usecount--; ++ if (!compr_ret) { ++ if ((!best_dlen)||(best_dlen>*cdatalen)) { ++ best_dlen = *cdatalen; ++ best_slen = *datalen; ++ best = this; ++ } ++ } ++ } ++ if (best_dlen) { ++ *cdatalen = best_dlen; ++ *datalen = best_slen; ++ output_buf = best->compr_buf; ++ best->compr_buf = NULL; ++ best->compr_buf_size = 0; ++ best->stat_compr_blocks++; ++ best->stat_compr_orig_size += best_slen; ++ best->stat_compr_new_size += best_dlen; ++ ret = best->compr; ++ } ++ spin_unlock(&jffs2_compressor_list_lock); ++ break; ++ default: ++ printk(KERN_ERR "JFFS2: unknow compression mode.\n"); ++ } + out: +- if (ret == JFFS2_COMPR_NONE) { +- *cpage_out = data_in; +- *datalen = *cdatalen; +- none_stat_compr_blocks++; +- none_stat_compr_size += *datalen; +- } +- else { +- *cpage_out = output_buf; +- } ++ if (ret == JFFS2_COMPR_NONE) { ++ *cpage_out = data_in; ++ *datalen = *cdatalen; ++ none_stat_compr_blocks++; ++ none_stat_compr_size += *datalen; ++ } ++ else { ++ *cpage_out = output_buf; ++ } + return ret; + } + +@@ -165,8 +166,8 @@ int jffs2_decompress(struct jffs2_sb_inf + uint16_t comprtype, unsigned char *cdata_in, + unsigned char *data_out, uint32_t cdatalen, uint32_t datalen) + { +- struct jffs2_compressor *this; +- int ret; ++ struct jffs2_compressor *this; ++ int ret; + + /* Older code had a bug where it would write non-zero 'usercompr' + fields. Deal with it. */ +@@ -177,32 +178,32 @@ int jffs2_decompress(struct jffs2_sb_inf + case JFFS2_COMPR_NONE: + /* This should be special-cased elsewhere, but we might as well deal with it */ + memcpy(data_out, cdata_in, datalen); +- none_stat_decompr_blocks++; ++ none_stat_decompr_blocks++; + break; + case JFFS2_COMPR_ZERO: + memset(data_out, 0, datalen); + break; + default: +- spin_lock(&jffs2_compressor_list_lock); +- list_for_each_entry(this, &jffs2_compressor_list, list) { +- if (comprtype == this->compr) { +- this->usecount++; +- spin_unlock(&jffs2_compressor_list_lock); +- ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL); +- spin_lock(&jffs2_compressor_list_lock); +- if (ret) { +- printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret); +- } +- else { +- this->stat_decompr_blocks++; +- } +- this->usecount--; +- spin_unlock(&jffs2_compressor_list_lock); +- return ret; +- } +- } ++ spin_lock(&jffs2_compressor_list_lock); ++ list_for_each_entry(this, &jffs2_compressor_list, list) { ++ if (comprtype == this->compr) { ++ this->usecount++; ++ spin_unlock(&jffs2_compressor_list_lock); ++ ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL); ++ spin_lock(&jffs2_compressor_list_lock); ++ if (ret) { ++ printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret); ++ } ++ else { ++ this->stat_decompr_blocks++; ++ } ++ this->usecount--; ++ spin_unlock(&jffs2_compressor_list_lock); ++ return ret; ++ } ++ } + printk(KERN_WARNING "JFFS2 compression type 0x%02x not available.\n", comprtype); +- spin_unlock(&jffs2_compressor_list_lock); ++ spin_unlock(&jffs2_compressor_list_lock); + return -EIO; + } + return 0; +@@ -210,108 +211,108 @@ int jffs2_decompress(struct jffs2_sb_inf + + int jffs2_register_compressor(struct jffs2_compressor *comp) + { +- struct jffs2_compressor *this; ++ struct jffs2_compressor *this; + +- if (!comp->name) { +- printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n"); +- return -1; +- } +- comp->compr_buf_size=0; +- comp->compr_buf=NULL; +- comp->usecount=0; +- comp->stat_compr_orig_size=0; +- comp->stat_compr_new_size=0; +- comp->stat_compr_blocks=0; +- comp->stat_decompr_blocks=0; +- D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name)); +- +- spin_lock(&jffs2_compressor_list_lock); +- +- list_for_each_entry(this, &jffs2_compressor_list, list) { +- if (this->priority < comp->priority) { +- list_add(&comp->list, this->list.prev); +- goto out; +- } +- } +- list_add_tail(&comp->list, &jffs2_compressor_list); ++ if (!comp->name) { ++ printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n"); ++ return -1; ++ } ++ comp->compr_buf_size=0; ++ comp->compr_buf=NULL; ++ comp->usecount=0; ++ comp->stat_compr_orig_size=0; ++ comp->stat_compr_new_size=0; ++ comp->stat_compr_blocks=0; ++ comp->stat_decompr_blocks=0; ++ D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name)); ++ ++ spin_lock(&jffs2_compressor_list_lock); ++ ++ list_for_each_entry(this, &jffs2_compressor_list, list) { ++ if (this->priority < comp->priority) { ++ list_add(&comp->list, this->list.prev); ++ goto out; ++ } ++ } ++ list_add_tail(&comp->list, &jffs2_compressor_list); + out: +- D2(list_for_each_entry(this, &jffs2_compressor_list, list) { +- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); +- }) ++ D2(list_for_each_entry(this, &jffs2_compressor_list, list) { ++ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); ++ }) + +- spin_unlock(&jffs2_compressor_list_lock); ++ spin_unlock(&jffs2_compressor_list_lock); + +- return 0; ++ return 0; + } + + int jffs2_unregister_compressor(struct jffs2_compressor *comp) + { +- D2(struct jffs2_compressor *this;) ++ D2(struct jffs2_compressor *this;) ++ ++ D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name)); + +- D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name)); ++ spin_lock(&jffs2_compressor_list_lock); + +- spin_lock(&jffs2_compressor_list_lock); ++ if (comp->usecount) { ++ spin_unlock(&jffs2_compressor_list_lock); ++ printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n"); ++ return -1; ++ } ++ list_del(&comp->list); + +- if (comp->usecount) { +- spin_unlock(&jffs2_compressor_list_lock); +- printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n"); +- return -1; +- } +- list_del(&comp->list); +- +- D2(list_for_each_entry(this, &jffs2_compressor_list, list) { +- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); +- }) +- spin_unlock(&jffs2_compressor_list_lock); +- return 0; ++ D2(list_for_each_entry(this, &jffs2_compressor_list, list) { ++ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); ++ }) ++ spin_unlock(&jffs2_compressor_list_lock); ++ return 0; + } + + void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig) + { +- if (orig != comprbuf) +- kfree(comprbuf); ++ if (orig != comprbuf) ++ kfree(comprbuf); + } + + int __init jffs2_compressors_init(void) + { + /* Registering compressors */ + #ifdef CONFIG_JFFS2_ZLIB +- jffs2_zlib_init(); ++ jffs2_zlib_init(); + #endif + #ifdef CONFIG_JFFS2_RTIME +- jffs2_rtime_init(); ++ jffs2_rtime_init(); + #endif + #ifdef CONFIG_JFFS2_RUBIN +- jffs2_rubinmips_init(); +- jffs2_dynrubin_init(); ++ jffs2_rubinmips_init(); ++ jffs2_dynrubin_init(); + #endif + /* Setting default compression mode */ + #ifdef CONFIG_JFFS2_CMODE_NONE +- jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; +- D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");) ++ jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; ++ D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");) + #else + #ifdef CONFIG_JFFS2_CMODE_SIZE +- jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE; +- D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");) ++ jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE; ++ D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");) + #else +- D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");) ++ D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");) + #endif + #endif +- return 0; ++ return 0; + } + + int jffs2_compressors_exit(void) + { + /* Unregistering compressors */ + #ifdef CONFIG_JFFS2_RUBIN +- jffs2_dynrubin_exit(); +- jffs2_rubinmips_exit(); ++ jffs2_dynrubin_exit(); ++ jffs2_rubinmips_exit(); + #endif + #ifdef CONFIG_JFFS2_RTIME +- jffs2_rtime_exit(); ++ jffs2_rtime_exit(); + #endif + #ifdef CONFIG_JFFS2_ZLIB +- jffs2_zlib_exit(); ++ jffs2_zlib_exit(); + #endif +- return 0; ++ return 0; + } +Index: linux-2.6.23.17/fs/jffs2/compr.h +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/compr.h ++++ linux-2.6.23.17/fs/jffs2/compr.h +@@ -2,7 +2,7 @@ + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright © 2004 Ferenc Havasi , +- * University of Szeged, Hungary ++ * University of Szeged, Hungary + * + * For licensing information, see the file 'LICENCE' in this directory. + * +@@ -32,29 +32,29 @@ + #define JFFS2_ZLIB_PRIORITY 60 + + #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */ +-#define JFFS2_DYNRUBIN_DISABLED /* for decompression */ ++#define JFFS2_DYNRUBIN_DISABLED /* for decompression */ + + #define JFFS2_COMPR_MODE_NONE 0 + #define JFFS2_COMPR_MODE_PRIORITY 1 + #define JFFS2_COMPR_MODE_SIZE 2 + + struct jffs2_compressor { +- struct list_head list; +- int priority; /* used by prirority comr. mode */ +- char *name; +- char compr; /* JFFS2_COMPR_XXX */ +- int (*compress)(unsigned char *data_in, unsigned char *cpage_out, +- uint32_t *srclen, uint32_t *destlen, void *model); +- int (*decompress)(unsigned char *cdata_in, unsigned char *data_out, +- uint32_t cdatalen, uint32_t datalen, void *model); +- int usecount; +- int disabled; /* if seted the compressor won't compress */ +- unsigned char *compr_buf; /* used by size compr. mode */ +- uint32_t compr_buf_size; /* used by size compr. mode */ +- uint32_t stat_compr_orig_size; +- uint32_t stat_compr_new_size; +- uint32_t stat_compr_blocks; +- uint32_t stat_decompr_blocks; ++ struct list_head list; ++ int priority; /* used by prirority comr. mode */ ++ char *name; ++ char compr; /* JFFS2_COMPR_XXX */ ++ int (*compress)(unsigned char *data_in, unsigned char *cpage_out, ++ uint32_t *srclen, uint32_t *destlen, void *model); ++ int (*decompress)(unsigned char *cdata_in, unsigned char *data_out, ++ uint32_t cdatalen, uint32_t datalen, void *model); ++ int usecount; ++ int disabled; /* if set the compressor won't compress */ ++ unsigned char *compr_buf; /* used by size compr. mode */ ++ uint32_t compr_buf_size; /* used by size compr. mode */ ++ uint32_t stat_compr_orig_size; ++ uint32_t stat_compr_new_size; ++ uint32_t stat_compr_blocks; ++ uint32_t stat_decompr_blocks; + }; + + int jffs2_register_compressor(struct jffs2_compressor *comp); +@@ -64,12 +64,12 @@ int jffs2_compressors_init(void); + int jffs2_compressors_exit(void); + + uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, +- unsigned char *data_in, unsigned char **cpage_out, +- uint32_t *datalen, uint32_t *cdatalen); ++ unsigned char *data_in, unsigned char **cpage_out, ++ uint32_t *datalen, uint32_t *cdatalen); + + int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, +- uint16_t comprtype, unsigned char *cdata_in, +- unsigned char *data_out, uint32_t cdatalen, uint32_t datalen); ++ uint16_t comprtype, unsigned char *cdata_in, ++ unsigned char *data_out, uint32_t cdatalen, uint32_t datalen); + + void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig); + +Index: linux-2.6.23.17/fs/jffs2/compr_rtime.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/compr_rtime.c ++++ linux-2.6.23.17/fs/jffs2/compr_rtime.c +@@ -104,7 +104,7 @@ static int jffs2_rtime_decompress(unsign + } + } + } +- return 0; ++ return 0; + } + + static struct jffs2_compressor jffs2_rtime_comp = { +Index: linux-2.6.23.17/fs/jffs2/compr_rubin.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/compr_rubin.c ++++ linux-2.6.23.17/fs/jffs2/compr_rubin.c +@@ -384,7 +384,7 @@ static int jffs2_rubinmips_decompress(un + void *model) + { + rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in, cpage_out, sourcelen, dstlen); +- return 0; ++ return 0; + } + + static int jffs2_dynrubin_decompress(unsigned char *data_in, +@@ -399,7 +399,7 @@ static int jffs2_dynrubin_decompress(uns + bits[c] = data_in[c]; + + rubin_do_decompress(256, bits, data_in+8, cpage_out, sourcelen-8, dstlen); +- return 0; ++ return 0; + } + + static struct jffs2_compressor jffs2_rubinmips_comp = { +Index: linux-2.6.23.17/fs/jffs2/compr_zlib.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/compr_zlib.c ++++ linux-2.6.23.17/fs/jffs2/compr_zlib.c +@@ -181,7 +181,7 @@ static int jffs2_zlib_decompress(unsigne + } + zlib_inflateEnd(&inf_strm); + mutex_unlock(&inflate_mutex); +- return 0; ++ return 0; + } + + static struct jffs2_compressor jffs2_zlib_comp = { +@@ -203,11 +203,11 @@ int __init jffs2_zlib_init(void) + + ret = alloc_workspaces(); + if (ret) +- return ret; ++ return ret; + + ret = jffs2_register_compressor(&jffs2_zlib_comp); + if (ret) +- free_workspaces(); ++ free_workspaces(); + + return ret; + } +Index: linux-2.6.23.17/fs/jffs2/dir.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/dir.c ++++ linux-2.6.23.17/fs/jffs2/dir.c +@@ -32,7 +32,7 @@ static int jffs2_mkdir (struct inode *,s + static int jffs2_rmdir (struct inode *,struct dentry *); + static int jffs2_mknod (struct inode *,struct dentry *,int,dev_t); + static int jffs2_rename (struct inode *, struct dentry *, +- struct inode *, struct dentry *); ++ struct inode *, struct dentry *); + + const struct file_operations jffs2_dir_operations = + { +@@ -770,7 +770,7 @@ static int jffs2_mknod (struct inode *di + } + + static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry, +- struct inode *new_dir_i, struct dentry *new_dentry) ++ struct inode *new_dir_i, struct dentry *new_dentry) + { + int ret; + struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb); +Index: linux-2.6.23.17/fs/jffs2/erase.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/erase.c ++++ linux-2.6.23.17/fs/jffs2/erase.c +@@ -38,8 +38,8 @@ static void jffs2_erase_block(struct jff + #ifdef __ECOS + ret = jffs2_flash_erase(c, jeb); + if (!ret) { +- jffs2_erase_succeeded(c, jeb); +- return; ++ jffs2_erase_succeeded(c, jeb); ++ return; + } + bad_offset = jeb->offset; + #else /* Linux */ +@@ -50,12 +50,14 @@ static void jffs2_erase_block(struct jff + instr = kmalloc(sizeof(struct erase_info) + sizeof(struct erase_priv_struct), GFP_KERNEL); + if (!instr) { + printk(KERN_WARNING "kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n"); ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + list_move(&jeb->list, &c->erase_pending_list); + c->erasing_size -= c->sector_size; + c->dirty_size += c->sector_size; + jeb->dirty_size = c->sector_size; + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + return; + } + +@@ -82,12 +84,14 @@ static void jffs2_erase_block(struct jff + if (ret == -ENOMEM || ret == -EAGAIN) { + /* Erase failed immediately. Refile it on the list */ + D1(printk(KERN_DEBUG "Erase at 0x%08x failed: %d. Refiling on erase_pending_list\n", jeb->offset, ret)); ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + list_move(&jeb->list, &c->erase_pending_list); + c->erasing_size -= c->sector_size; + c->dirty_size += c->sector_size; + jeb->dirty_size = c->sector_size; + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + return; + } + +@@ -114,6 +118,7 @@ void jffs2_erase_pending_blocks(struct j + jeb = list_entry(c->erase_complete_list.next, struct jffs2_eraseblock, list); + list_del(&jeb->list); + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + jffs2_mark_erased_block(c, jeb); + + if (!--count) { +@@ -134,6 +139,7 @@ void jffs2_erase_pending_blocks(struct j + jffs2_free_jeb_node_refs(c, jeb); + list_add(&jeb->list, &c->erasing_list); + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + + jffs2_erase_block(c, jeb); + +@@ -142,23 +148,25 @@ void jffs2_erase_pending_blocks(struct j + } + + /* Be nice */ +- cond_resched(); ++ yield(); ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + } + + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + done: + D1(printk(KERN_DEBUG "jffs2_erase_pending_blocks completed\n")); +- +- up(&c->erase_free_sem); + } + + static void jffs2_erase_succeeded(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) + { + D1(printk(KERN_DEBUG "Erase completed successfully at 0x%08x\n", jeb->offset)); ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + list_move_tail(&jeb->list, &c->erase_complete_list); + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + /* Ensure that kupdated calls us again to mark them clean */ + jffs2_erase_pending_trigger(c); + } +@@ -172,22 +180,26 @@ static void jffs2_erase_failed(struct jf + failed too many times. */ + if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) { + /* We'd like to give this block another try. */ ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + list_move(&jeb->list, &c->erase_pending_list); + c->erasing_size -= c->sector_size; + c->dirty_size += c->sector_size; + jeb->dirty_size = c->sector_size; + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + return; + } + } + ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + c->erasing_size -= c->sector_size; + c->bad_size += c->sector_size; + list_move(&jeb->list, &c->bad_list); + c->nr_erasing_blocks--; + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + wake_up(&c->erase_wait); + } + +@@ -317,6 +329,33 @@ static int jffs2_block_check_erase(struc + size_t retlen; + int ret = -EIO; + ++ if (c->mtd->point) { ++ unsigned long *wordebuf; ++ ++ ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size, &retlen, (unsigned char **)&ebuf); ++ if (ret) { ++ D1(printk(KERN_DEBUG "MTD point failed %d\n", ret)); ++ goto do_flash_read; ++ } ++ if (retlen < c->sector_size) { ++ /* Don't muck about if it won't let us point to the whole erase sector */ ++ D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", retlen)); ++ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size); ++ goto do_flash_read; ++ } ++ wordebuf = ebuf-sizeof(*wordebuf); ++ retlen /= sizeof(*wordebuf); ++ do { ++ if (*++wordebuf != ~0) ++ break; ++ } while(--retlen); ++ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size); ++ if (retlen) ++ printk(KERN_WARNING "Newly-erased block contained word 0x%lx at offset 0x%08x\n", ++ *wordebuf, jeb->offset + c->sector_size-retlen*sizeof(*wordebuf)); ++ return 0; ++ } ++ do_flash_read: + ebuf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!ebuf) { + printk(KERN_WARNING "Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n", jeb->offset); +@@ -417,6 +456,7 @@ static void jffs2_mark_erased_block(stru + jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, c->cleanmarker_size, NULL); + } + ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + c->erasing_size -= c->sector_size; + c->free_size += jeb->free_size; +@@ -429,23 +469,28 @@ static void jffs2_mark_erased_block(stru + c->nr_erasing_blocks--; + c->nr_free_blocks++; + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + wake_up(&c->erase_wait); + return; + + filebad: ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + /* Stick it on a list (any list) so erase_failed can take it + right off again. Silly, but shouldn't happen often. */ + list_add(&jeb->list, &c->erasing_list); + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + jffs2_erase_failed(c, jeb, bad_offset); + return; + + refile: + /* Stick it back on the list from whence it came and come back later */ + jffs2_erase_pending_trigger(c); ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + list_add(&jeb->list, &c->erase_complete_list); + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + return; + } +Index: linux-2.6.23.17/fs/jffs2/gc.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/gc.c ++++ linux-2.6.23.17/fs/jffs2/gc.c +@@ -556,7 +556,7 @@ static int jffs2_garbage_collect_pristin + + node = kmalloc(rawlen, GFP_KERNEL); + if (!node) +- return -ENOMEM; ++ return -ENOMEM; + + ret = jffs2_flash_read(c, ref_offset(raw), rawlen, &retlen, (char *)node); + if (!ret && retlen != rawlen) +@@ -624,7 +624,7 @@ static int jffs2_garbage_collect_pristin + + if (ret || (retlen != rawlen)) { + printk(KERN_NOTICE "Write of %d bytes at 0x%08x failed. returned %d, retlen %zd\n", +- rawlen, phys_ofs, ret, retlen); ++ rawlen, phys_ofs, ret, retlen); + if (retlen) { + jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, rawlen, NULL); + } else { +Index: linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/jffs2_fs_sb.h ++++ linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h +@@ -106,6 +106,9 @@ struct jffs2_sb_info { + + uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */ + ++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY ++ unsigned char *wbuf_verify; /* read-back buffer for verification */ ++#endif + #ifdef CONFIG_JFFS2_FS_WRITEBUFFER + unsigned char *wbuf; /* Write-behind buffer for NAND flash */ + uint32_t wbuf_ofs; +Index: linux-2.6.23.17/fs/jffs2/nodelist.h +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/nodelist.h ++++ linux-2.6.23.17/fs/jffs2/nodelist.h +@@ -127,7 +127,7 @@ static inline struct jffs2_inode_cache * + return ((struct jffs2_inode_cache *)raw); + } + +- /* flash_offset & 3 always has to be zero, because nodes are ++ /* flash_offset & 3 always has to be zero, because nodes are + always aligned at 4 bytes. So we have a couple of extra bits + to play with, which indicate the node's status; see below: */ + #define REF_UNCHECKED 0 /* We haven't yet checked the CRC or built its inode */ +@@ -197,7 +197,7 @@ struct jffs2_inode_cache { + #define RAWNODE_CLASS_XATTR_DATUM 1 + #define RAWNODE_CLASS_XATTR_REF 2 + +-#define INOCACHE_HASHSIZE 128 ++#define INOCACHE_HASHSIZE 1024 + + #define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size) + +Index: linux-2.6.23.17/fs/jffs2/nodemgmt.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/nodemgmt.c ++++ linux-2.6.23.17/fs/jffs2/nodemgmt.c +@@ -154,7 +154,7 @@ int jffs2_reserve_space_gc(struct jffs2_ + while(ret == -EAGAIN) { + ret = jffs2_do_reserve_space(c, minsize, len, sumsize); + if (ret) { +- D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret)); ++ D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret)); + } + } + spin_unlock(&c->erase_completion_lock); +@@ -423,7 +423,12 @@ struct jffs2_raw_node_ref *jffs2_add_phy + even after refiling c->nextblock */ + if ((c->nextblock || ((ofs & 3) != REF_OBSOLETE)) + && (jeb != c->nextblock || (ofs & ~3) != jeb->offset + (c->sector_size - jeb->free_size))) { +- printk(KERN_WARNING "argh. node added in wrong place\n"); ++ printk(KERN_WARNING "argh. node added in wrong place at 0x%08x(%d)\n", ofs & ~3, ofs & 3); ++ if (c->nextblock) ++ printk(KERN_WARNING "nextblock 0x%08x", c->nextblock->offset); ++ else ++ printk(KERN_WARNING "No nextblock"); ++ printk(", expected at %08x\n", jeb->offset + (c->sector_size - jeb->free_size)); + return ERR_PTR(-EINVAL); + } + #endif +Index: linux-2.6.23.17/fs/jffs2/readinode.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/readinode.c ++++ linux-2.6.23.17/fs/jffs2/readinode.c +@@ -211,7 +211,7 @@ static void jffs2_kill_tn(struct jffs2_s + * ordering. + * + * Returns 0 if the node was handled (including marking it obsolete) +- * < 0 an if error occurred ++ * < 0 an if error occurred + */ + static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, + struct jffs2_readinode_info *rii, +@@ -862,8 +862,8 @@ static inline int read_unknown(struct jf + JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n", + ref_offset(ref)); + JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n", +- je16_to_cpu(un->magic), je16_to_cpu(un->nodetype), +- je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc)); ++ je16_to_cpu(un->magic), je16_to_cpu(un->nodetype), ++ je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc)); + jffs2_mark_node_obsolete(c, ref); + return 0; + } +Index: linux-2.6.23.17/fs/jffs2/scan.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/scan.c ++++ linux-2.6.23.17/fs/jffs2/scan.c +@@ -877,7 +877,7 @@ scan_more: + switch (je16_to_cpu(node->nodetype) & JFFS2_COMPAT_MASK) { + case JFFS2_FEATURE_ROCOMPAT: + printk(KERN_NOTICE "Read-only compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs); +- c->flags |= JFFS2_SB_FLAG_RO; ++ c->flags |= JFFS2_SB_FLAG_RO; + if (!(jffs2_is_readonly(c))) + return -EROFS; + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen))))) +Index: linux-2.6.23.17/fs/jffs2/security.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/security.c ++++ linux-2.6.23.17/fs/jffs2/security.c +@@ -38,9 +38,9 @@ int jffs2_init_security(struct inode *in + } + rc = do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, value, len, 0); + +- kfree(name); +- kfree(value); +- return rc; ++ kfree(name); ++ kfree(value); ++ return rc; + } + + /* ---- XATTR Handler for "security.*" ----------------- */ +Index: linux-2.6.23.17/fs/jffs2/summary.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/summary.c ++++ linux-2.6.23.17/fs/jffs2/summary.c +@@ -2,10 +2,10 @@ + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright © 2004 Ferenc Havasi , +- * Zoltan Sogor , +- * Patrik Kluba , +- * University of Szeged, Hungary +- * 2006 KaiGai Kohei ++ * Zoltan Sogor , ++ * Patrik Kluba , ++ * University of Szeged, Hungary ++ * 2006 KaiGai Kohei + * + * For licensing information, see the file 'LICENCE' in this directory. + * +Index: linux-2.6.23.17/fs/jffs2/summary.h +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/summary.h ++++ linux-2.6.23.17/fs/jffs2/summary.h +@@ -2,9 +2,9 @@ + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright © 2004 Ferenc Havasi , +- * Zoltan Sogor , +- * Patrik Kluba , +- * University of Szeged, Hungary ++ * Zoltan Sogor , ++ * Patrik Kluba , ++ * University of Szeged, Hungary + * + * For licensing information, see the file 'LICENCE' in this directory. + * +Index: linux-2.6.23.17/fs/jffs2/wbuf.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/wbuf.c ++++ linux-2.6.23.17/fs/jffs2/wbuf.c +@@ -220,6 +220,47 @@ static struct jffs2_raw_node_ref **jffs2 + return NULL; + } + ++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY ++static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf, ++ uint32_t ofs) ++{ ++ int ret; ++ size_t retlen; ++ char *eccstr; ++ ++ ret = c->mtd->read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify); ++ if (ret && ret != -EUCLEAN && ret != -EBADMSG) { ++ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x failed: %d\n", c->wbuf_ofs, ret); ++ return ret; ++ } else if (retlen != c->wbuf_pagesize) { ++ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x gave short read: %zd not %d.\n", ofs, retlen, c->wbuf_pagesize); ++ return -EIO; ++ } ++ if (!memcmp(buf, c->wbuf_verify, c->wbuf_pagesize)) ++ return 0; ++ ++ if (ret == -EUCLEAN) ++ eccstr = "corrected"; ++ else if (ret == -EBADMSG) ++ eccstr = "correction failed"; ++ else ++ eccstr = "OK or unused"; ++ ++ printk(KERN_WARNING "Write verify error (ECC %s) at %08x. Wrote:\n", ++ eccstr, c->wbuf_ofs); ++ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1, ++ c->wbuf, c->wbuf_pagesize, 0); ++ ++ printk(KERN_WARNING "Read back:\n"); ++ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1, ++ c->wbuf_verify, c->wbuf_pagesize, 0); ++ ++ return -EIO; ++} ++#else ++#define jffs2_verify_write(c,b,o) (0) ++#endif ++ + /* Recover from failure to write wbuf. Recover the nodes up to the + * wbuf, not the one which we were starting to try to write. */ + +@@ -380,7 +421,7 @@ static void jffs2_wbuf_recover(struct jf + ret = c->mtd->write(c->mtd, ofs, towrite, &retlen, + rewrite_buf); + +- if (ret || retlen != towrite) { ++ if (ret || retlen != towrite || jffs2_verify_write(c, rewrite_buf, ofs)) { + /* Argh. We tried. Really we did. */ + printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n"); + kfree(buf); +@@ -587,15 +628,16 @@ static int __jffs2_flush_wbuf(struct jff + + ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf); + +- if (ret || retlen != c->wbuf_pagesize) { +- if (ret) +- printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n",ret); +- else { +- printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n", +- retlen, c->wbuf_pagesize); +- ret = -EIO; +- } +- ++ if (ret) { ++ printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n", ret); ++ goto wfail; ++ } else if (retlen != c->wbuf_pagesize) { ++ printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n", ++ retlen, c->wbuf_pagesize); ++ ret = -EIO; ++ goto wfail; ++ } else if ((ret = jffs2_verify_write(c, c->wbuf, c->wbuf_ofs))) { ++ wfail: + jffs2_wbuf_recover(c); + + return ret; +@@ -966,8 +1008,8 @@ exit: + + #define NR_OOB_SCAN_PAGES 4 + +-/* For historical reasons we use only 12 bytes for OOB clean marker */ +-#define OOB_CM_SIZE 12 ++/* For historical reasons we use only 8 bytes for OOB clean marker */ ++#define OOB_CM_SIZE 8 + + static const struct jffs2_unknown_node oob_cleanmarker = + { +@@ -1021,8 +1063,8 @@ int jffs2_check_oob_empty(struct jffs2_s + /* + * Check for a valid cleanmarker. + * Returns: 0 if a valid cleanmarker was found +- * 1 if no cleanmarker was found +- * negative error code if an error occurred ++ * 1 if no cleanmarker was found ++ * negative error code if an error occurred + */ + int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb) +@@ -1138,11 +1180,22 @@ int jffs2_nand_flash_setup(struct jffs2_ + return -ENOMEM; + } + ++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY ++ c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL); ++ if (!c->wbuf_verify) { ++ kfree(c->oobbuf); ++ kfree(c->wbuf); ++ return -ENOMEM; ++ } ++#endif + return 0; + } + + void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c) + { ++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY ++ kfree(c->wbuf_verify); ++#endif + kfree(c->wbuf); + kfree(c->oobbuf); + } +Index: linux-2.6.23.17/fs/jffs2/xattr.h +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/xattr.h ++++ linux-2.6.23.17/fs/jffs2/xattr.h +@@ -75,7 +75,7 @@ extern void jffs2_build_xattr_subsystem( + extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c); + + extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c, +- uint32_t xid, uint32_t version); ++ uint32_t xid, uint32_t version); + + extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic); + extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic); +Index: linux-2.6.23.17/fs/jffs2/xattr_user.c +=================================================================== +--- linux-2.6.23.17.orig/fs/jffs2/xattr_user.c ++++ linux-2.6.23.17/fs/jffs2/xattr_user.c +@@ -17,7 +17,7 @@ + #include "nodelist.h" + + static int jffs2_user_getxattr(struct inode *inode, const char *name, +- void *buffer, size_t size) ++ void *buffer, size_t size) + { + if (!strcmp(name, "")) + return -EINVAL; +@@ -25,7 +25,7 @@ static int jffs2_user_getxattr(struct in + } + + static int jffs2_user_setxattr(struct inode *inode, const char *name, const void *buffer, +- size_t size, int flags) ++ size_t size, int flags) + { + if (!strcmp(name, "")) + return -EINVAL; +Index: linux-2.6.23.17/include/asm-i386/geode.h +=================================================================== +--- linux-2.6.23.17.orig/include/asm-i386/geode.h ++++ linux-2.6.23.17/include/asm-i386/geode.h +@@ -135,6 +135,55 @@ static inline void geode_gpio_event_pme( + geode_gpio_setup_event(gpio, pair, 1); + } + ++/* MFGPT */ ++ ++#define MFGPT_TIMER_ANY -1 ++ ++#define MFGPT_DOMAIN_WORKING 1 ++#define MFGPT_DOMAIN_STANDBY 2 ++#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY) ++ ++#define MFGPT_CMP1 0 ++#define MFGPT_CMP2 1 ++ ++#define MFGPT_EVENT_IRQ 0 ++#define MFGPT_EVENT_NMI 1 ++#define MFGPT_EVENT_RESET 3 ++ ++#define MFGPT_REG_CMP1 0 ++#define MFGPT_REG_CMP2 2 ++#define MFGPT_REG_COUNTER 4 ++#define MFGPT_REG_SETUP 6 ++ ++#define MFGPT_SETUP_CNTEN (1 << 15) ++#define MFGPT_SETUP_CMP2 (1 << 14) ++#define MFGPT_SETUP_CMP1 (1 << 13) ++#define MFGPT_SETUP_SETUP (1 << 12) ++#define MFGPT_SETUP_STOPEN (1 << 11) ++#define MFGPT_SETUP_EXTEN (1 << 10) ++#define MFGPT_SETUP_REVEN (1 << 5) ++#define MFGPT_SETUP_CLKSEL (1 << 4) ++ ++static inline void geode_mfgpt_write(int timer, u16 reg, u16 value) ++{ ++ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); ++ outw(value, base + reg + (timer * 8)); ++} ++ ++static inline u16 geode_mfgpt_read(int timer, u16 reg) ++{ ++ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); ++ return inw(base + reg + (timer * 8)); ++} ++ ++extern int __init geode_mfgpt_detect(void); ++extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable); ++extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable); ++extern int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner); ++ ++#define geode_mfgpt_setup_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),1) ++#define geode_mfgpt_release_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),0) ++ + /* Specific geode tests */ + + static inline int is_geode_gx(void) +Index: linux-2.6.23.17/include/asm-i386/setup.h +=================================================================== +--- linux-2.6.23.17.orig/include/asm-i386/setup.h ++++ linux-2.6.23.17/include/asm-i386/setup.h +@@ -24,6 +24,7 @@ + #define OLD_CL_BASE_ADDR 0x90000 + #define OLD_CL_OFFSET 0x90022 + #define NEW_CL_POINTER 0x228 /* Relative to real mode data */ ++#define OFW_INFO_OFFSET 0xb0 /* Relative to real mode data */ + + #ifndef __ASSEMBLY__ + +Index: linux-2.6.23.17/include/linux/console.h +=================================================================== +--- linux-2.6.23.17.orig/include/linux/console.h ++++ linux-2.6.23.17/include/linux/console.h +@@ -121,14 +121,11 @@ extern void console_stop(struct console + extern void console_start(struct console *); + extern int is_console_locked(void); + +-#ifndef CONFIG_DISABLE_CONSOLE_SUSPEND ++extern int serial_console_suspend_enabled; ++ + /* Suspend and resume console messages over PM events */ + extern void suspend_console(void); + extern void resume_console(void); +-#else +-static inline void suspend_console(void) {} +-static inline void resume_console(void) {} +-#endif /* CONFIG_DISABLE_CONSOLE_SUSPEND */ + + int mda_console_init(void); + void prom_con_init(void); +Index: linux-2.6.23.17/include/linux/fb.h +=================================================================== +--- linux-2.6.23.17.orig/include/linux/fb.h ++++ linux-2.6.23.17/include/linux/fb.h +@@ -664,6 +664,12 @@ struct fb_ops { + /* restore saved state */ + void (*fb_restore_state)(struct fb_info *info); + ++ /* Shut down the graphics engine to save power */ ++ int (*fb_powerdown)(struct fb_info *info); ++ ++ /* Power it back up */ ++ int (*fb_powerup)(struct fb_info *info); ++ + /* get capability given var */ + void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps, + struct fb_var_screeninfo *var); +@@ -943,6 +949,9 @@ extern int fb_get_color_depth(struct fb_ + extern int fb_get_options(char *name, char **option); + extern int fb_new_modelist(struct fb_info *info); + ++extern int fb_powerdown(struct fb_info *info); ++extern int fb_powerup(struct fb_info *info); ++ + extern struct fb_info *registered_fb[FB_MAX]; + extern int num_registered_fb; + extern struct class *fb_class; +Index: linux-2.6.23.17/include/linux/mtd/onenand.h +=================================================================== +--- linux-2.6.23.17.orig/include/linux/mtd/onenand.h ++++ linux-2.6.23.17/include/linux/mtd/onenand.h +@@ -60,6 +60,7 @@ struct onenand_bufferram { + * @erase_shift: [INTERN] number of address bits in a block + * @page_shift: [INTERN] number of address bits in a page + * @page_mask: [INTERN] a page per block mask ++ * @writesize: [INTERN] a real page size + * @bufferram_index: [INTERN] BufferRAM index + * @bufferram: [INTERN] BufferRAM info + * @readw: [REPLACEABLE] hardware specific function for read short +@@ -100,6 +101,7 @@ struct onenand_chip { + unsigned int erase_shift; + unsigned int page_shift; + unsigned int page_mask; ++ unsigned int writesize; + + unsigned int bufferram_index; + struct onenand_bufferram bufferram[MAX_BUFFERRAM]; +@@ -140,6 +142,8 @@ struct onenand_chip { + #define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) + #define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) + #define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1) ++#define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0) ++#define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1) + + #define ONENAND_GET_SYS_CFG1(this) \ + (this->read_word(this->base + ONENAND_REG_SYS_CFG1)) +@@ -149,6 +153,13 @@ struct onenand_chip { + #define ONENAND_IS_DDP(this) \ + (this->device_id & ONENAND_DEVICE_IS_DDP) + ++#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM ++#define ONENAND_IS_2PLANE(this) \ ++ (this->options & ONENAND_HAS_2PLANE) ++#else ++#define ONENAND_IS_2PLANE(this) (0) ++#endif ++ + /* Check byte access in OneNAND */ + #define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1) + +@@ -157,6 +168,7 @@ struct onenand_chip { + */ + #define ONENAND_HAS_CONT_LOCK (0x0001) + #define ONENAND_HAS_UNLOCK_ALL (0x0002) ++#define ONENAND_HAS_2PLANE (0x0004) + #define ONENAND_PAGEBUF_ALLOC (0x1000) + #define ONENAND_OOBBUF_ALLOC (0x2000) + +Index: linux-2.6.23.17/include/linux/mtd/onenand_regs.h +=================================================================== +--- linux-2.6.23.17.orig/include/linux/mtd/onenand_regs.h ++++ linux-2.6.23.17/include/linux/mtd/onenand_regs.h +@@ -74,6 +74,8 @@ + + #define ONENAND_DEVICE_DENSITY_512Mb (0x002) + #define ONENAND_DEVICE_DENSITY_1Gb (0x003) ++#define ONENAND_DEVICE_DENSITY_2Gb (0x004) ++#define ONENAND_DEVICE_DENSITY_4Gb (0x005) + + /* + * Version ID Register F002h (R) +@@ -111,6 +113,8 @@ + #define ONENAND_CMD_READOOB (0x13) + #define ONENAND_CMD_PROG (0x80) + #define ONENAND_CMD_PROGOOB (0x1A) ++#define ONENAND_CMD_2X_PROG (0x7D) ++#define ONENAND_CMD_2X_CACHE_PROG (0x7F) + #define ONENAND_CMD_UNLOCK (0x23) + #define ONENAND_CMD_LOCK (0x2A) + #define ONENAND_CMD_LOCK_TIGHT (0x2C) +Index: linux-2.6.23.17/include/linux/vt_kern.h +=================================================================== +--- linux-2.6.23.17.orig/include/linux/vt_kern.h ++++ linux-2.6.23.17/include/linux/vt_kern.h +@@ -95,4 +95,23 @@ struct vt_spawn_console { + }; + extern struct vt_spawn_console vt_spawn_con; + ++/* A notifier list for console events */ ++extern struct raw_notifier_head console_notifier_list; ++ ++/* Called when the FG console switches to KD_TEXT mode */ ++#define CONSOLE_EVENT_SWITCH_TEXT 0x01 ++ ++/* Called when the FG console switches to KD_GRAPHICS mode */ ++#define CONSOLE_EVENT_SWITCH_GRAPHICS 0x02 ++ ++static inline int console_event_register(struct notifier_block *n) ++{ ++ return raw_notifier_chain_register(&console_notifier_list, n); ++} ++ ++static inline int console_event_unregister(struct notifier_block *n) ++{ ++ return raw_notifier_chain_unregister(&console_notifier_list, n); ++} ++ + #endif /* _VT_KERN_H */ +Index: linux-2.6.23.17/kernel/power/console.c +=================================================================== +--- linux-2.6.23.17.orig/kernel/power/console.c ++++ linux-2.6.23.17/kernel/power/console.c +@@ -9,7 +9,7 @@ + #include + #include "power.h" + +-#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) ++#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) && !defined(CONFIG_DISABLE_SUSPEND_VT_SWITCH) + #define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1) + + static int orig_fgconsole, orig_kmsg; diff --git a/target/linux/olpc/patches-2.6.23/110-olpc_sound.patch b/target/linux/olpc/patches-2.6.23/110-olpc_sound.patch new file mode 100644 index 0000000000..c322e46f53 --- /dev/null +++ b/target/linux/olpc/patches-2.6.23/110-olpc_sound.patch @@ -0,0 +1,414 @@ +Index: linux-2.6.23.17/include/sound/ac97_codec.h +=================================================================== +--- linux-2.6.23.17.orig/include/sound/ac97_codec.h ++++ linux-2.6.23.17/include/sound/ac97_codec.h +@@ -281,10 +281,12 @@ + /* specific - Analog Devices */ + #define AC97_AD_TEST 0x5a /* test register */ + #define AC97_AD_TEST2 0x5c /* undocumented test register 2 */ ++#define AC97_AD_HPFD_SHIFT 12 /* High Pass Filter Disable */ + #define AC97_AD_CODEC_CFG 0x70 /* codec configuration */ + #define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */ + #define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */ + #define AC97_AD_MISC 0x76 /* Misc Control Bits */ ++#define AC97_AD_VREFD_SHIFT 2 /* V_REFOUT Disable (AD1888) */ + + /* specific - Cirrus Logic */ + #define AC97_CSR_ACMODE 0x5e /* AC Mode Register */ +Index: linux-2.6.23.17/sound/pci/ac97/ac97_codec.c +=================================================================== +--- linux-2.6.23.17.orig/sound/pci/ac97/ac97_codec.c ++++ linux-2.6.23.17/sound/pci/ac97/ac97_codec.c +@@ -49,7 +49,7 @@ module_param(enable_loopback, bool, 0444 + MODULE_PARM_DESC(enable_loopback, "Enable AC97 ADC/DAC Loopback Control"); + + #ifdef CONFIG_SND_AC97_POWER_SAVE +-static int power_save; ++static int power_save = 1; + module_param(power_save, bool, 0644); + MODULE_PARM_DESC(power_save, "Enable AC97 power-saving control"); + #endif +Index: linux-2.6.23.17/sound/pci/ac97/ac97_patch.c +=================================================================== +--- linux-2.6.23.17.orig/sound/pci/ac97/ac97_patch.c ++++ linux-2.6.23.17/sound/pci/ac97/ac97_patch.c +@@ -1973,8 +1973,9 @@ static const struct snd_kcontrol_new snd + .get = snd_ac97_ad1888_lohpsel_get, + .put = snd_ac97_ad1888_lohpsel_put + }, +- AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1), +- AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1), ++ AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1), ++ AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, ++ AC97_AD_HPFD_SHIFT, 1, 1), + AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, +Index: linux-2.6.23.17/sound/pci/cs5535audio/Makefile +=================================================================== +--- linux-2.6.23.17.orig/sound/pci/cs5535audio/Makefile ++++ linux-2.6.23.17/sound/pci/cs5535audio/Makefile +@@ -8,5 +8,9 @@ ifeq ($(CONFIG_PM),y) + snd-cs5535audio-objs += cs5535audio_pm.o + endif + ++ifdef CONFIG_OLPC ++snd-cs5535audio-objs += cs5535audio_olpc.o ++endif ++ + # Toplevel Module Dependency + obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o +Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.c +=================================================================== +--- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio.c ++++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.c +@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac + return snd_cs5535audio_codec_read(cs5535au, reg); + } + +-static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au) ++static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au) + { + struct snd_card *card = cs5535au->card; + struct snd_ac97_bus *pbus; +@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct + return err; + + memset(&ac97, 0, sizeof(ac97)); +- ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM; ++ ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM ++ | AC97_SCAP_POWER_SAVE; + ac97.private_data = cs5535au; + ac97.pci = cs5535au->pci; + ++ /* olpc_prequirks is dummied out if not olpc */ ++ olpc_prequirks(card, &ac97); ++ + if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) { + snd_printk(KERN_ERR "mixer failed\n"); + return err; +@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct + + snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk); + ++ /* olpc_quirks is dummied out if not olpc */ ++ if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) { ++ snd_printk(KERN_ERR "olpc quirks failed\n"); ++ return err; ++ } ++ + return 0; + } + +@@ -206,7 +216,6 @@ static void process_bm1_irq(struct cs553 + static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id) + { + u16 acc_irq_stat; +- u8 bm_stat; + unsigned char count; + struct cs5535audio *cs5535au = dev_id; + +@@ -217,7 +226,7 @@ static irqreturn_t snd_cs5535audio_inter + + if (!acc_irq_stat) + return IRQ_NONE; +- for (count = 0; count < 10; count++) { ++ for (count = 0; count < 4; count++) { + if (acc_irq_stat & (1 << count)) { + switch (count) { + case IRQ_STS: +@@ -232,26 +241,9 @@ static irqreturn_t snd_cs5535audio_inter + case BM1_IRQ_STS: + process_bm1_irq(cs5535au); + break; +- case BM2_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM2_STATUS); +- break; +- case BM3_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM3_STATUS); +- break; +- case BM4_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM4_STATUS); +- break; +- case BM5_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM5_STATUS); +- break; +- case BM6_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM6_STATUS); +- break; +- case BM7_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM7_STATUS); +- break; + default: +- snd_printk(KERN_ERR "Unexpected irq src\n"); ++ snd_printk(KERN_ERR "Unexpected irq src: " ++ "0x%x\n", acc_irq_stat); + break; + } + } +Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.h +=================================================================== +--- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio.h ++++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.h +@@ -16,57 +16,28 @@ + #define ACC_IRQ_STATUS 0x12 + #define ACC_BM0_CMD 0x20 + #define ACC_BM1_CMD 0x28 +-#define ACC_BM2_CMD 0x30 +-#define ACC_BM3_CMD 0x38 +-#define ACC_BM4_CMD 0x40 +-#define ACC_BM5_CMD 0x48 +-#define ACC_BM6_CMD 0x50 +-#define ACC_BM7_CMD 0x58 + #define ACC_BM0_PRD 0x24 + #define ACC_BM1_PRD 0x2C +-#define ACC_BM2_PRD 0x34 +-#define ACC_BM3_PRD 0x3C +-#define ACC_BM4_PRD 0x44 +-#define ACC_BM5_PRD 0x4C +-#define ACC_BM6_PRD 0x54 +-#define ACC_BM7_PRD 0x5C + #define ACC_BM0_STATUS 0x21 + #define ACC_BM1_STATUS 0x29 +-#define ACC_BM2_STATUS 0x31 +-#define ACC_BM3_STATUS 0x39 +-#define ACC_BM4_STATUS 0x41 +-#define ACC_BM5_STATUS 0x49 +-#define ACC_BM6_STATUS 0x51 +-#define ACC_BM7_STATUS 0x59 + #define ACC_BM0_PNTR 0x60 + #define ACC_BM1_PNTR 0x64 +-#define ACC_BM2_PNTR 0x68 +-#define ACC_BM3_PNTR 0x6C +-#define ACC_BM4_PNTR 0x70 +-#define ACC_BM5_PNTR 0x74 +-#define ACC_BM6_PNTR 0x78 +-#define ACC_BM7_PNTR 0x7C ++ + /* acc_codec bar0 reg bits */ + /* ACC_IRQ_STATUS */ + #define IRQ_STS 0 + #define WU_IRQ_STS 1 + #define BM0_IRQ_STS 2 + #define BM1_IRQ_STS 3 +-#define BM2_IRQ_STS 4 +-#define BM3_IRQ_STS 5 +-#define BM4_IRQ_STS 6 +-#define BM5_IRQ_STS 7 +-#define BM6_IRQ_STS 8 +-#define BM7_IRQ_STS 9 + /* ACC_BMX_STATUS */ + #define EOP (1<<0) + #define BM_EOP_ERR (1<<1) + /* ACC_BMX_CTL */ +-#define BM_CTL_EN 0x00000001 +-#define BM_CTL_PAUSE 0x00000011 +-#define BM_CTL_DIS 0x00000000 +-#define BM_CTL_BYTE_ORD_LE 0x00000000 +-#define BM_CTL_BYTE_ORD_BE 0x00000100 ++#define BM_CTL_EN 0x01 ++#define BM_CTL_PAUSE 0x03 ++#define BM_CTL_DIS 0x00 ++#define BM_CTL_BYTE_ORD_LE 0x00 ++#define BM_CTL_BYTE_ORD_BE 0x04 + /* cs5535 specific ac97 codec register defines */ + #define CMD_MASK 0xFF00FFFF + #define CMD_NEW 0x00010000 +@@ -106,8 +77,8 @@ struct cs5535audio_dma { + struct snd_pcm_substream *substream; + unsigned int buf_addr, buf_bytes; + unsigned int period_bytes, periods; +- int suspended; + u32 saved_prd; ++ int pcm_open_flag; + }; + + struct cs5535audio { +@@ -123,8 +94,21 @@ struct cs5535audio { + struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS]; + }; + ++#ifdef CONFIG_PM + int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state); + int snd_cs5535audio_resume(struct pci_dev *pci); ++#endif ++ ++#ifdef CONFIG_OLPC ++void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit; ++int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit; ++int olpc_ai_enable(struct snd_ac97 *ac97, u8 val); ++#else ++#define olpc_prequirks(arg,arg2) do {} while (0) ++#define olpc_quirks(arg,arg2) (0) ++#define olpc_ai_enable(a, v) (0) ++#endif ++ + int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio); + + #endif /* __SOUND_CS5535AUDIO_H */ +Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pcm.c +=================================================================== +--- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio_pcm.c ++++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pcm.c +@@ -164,6 +164,7 @@ static int cs5535audio_build_dma_packets + jmpprd_addr = cpu_to_le32(lastdesc->addr + + (sizeof(struct cs5535audio_dma_desc)*periods)); + ++ dma->substream = substream; + dma->period_bytes = period_bytes; + dma->periods = periods; + spin_lock_irq(&cs5535au->reg_lock); +@@ -241,6 +242,7 @@ static void cs5535audio_clear_dma_packet + { + snd_dma_free_pages(&dma->desc_buf); + dma->desc_buf.area = NULL; ++ dma->substream = NULL; + } + + static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream, +@@ -260,6 +262,9 @@ static int snd_cs5535audio_hw_params(str + err = cs5535audio_build_dma_packets(cs5535au, dma, substream, + params_periods(hw_params), + params_period_bytes(hw_params)); ++ if (!err) ++ dma->pcm_open_flag = 1; ++ + return err; + } + +@@ -268,6 +273,15 @@ static int snd_cs5535audio_hw_free(struc + struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream); + struct cs5535audio_dma *dma = substream->runtime->private_data; + ++ if (dma->pcm_open_flag) { ++ if (substream == cs5535au->playback_substream) ++ snd_ac97_update_power(cs5535au->ac97, ++ AC97_PCM_FRONT_DAC_RATE, 0); ++ else ++ snd_ac97_update_power(cs5535au->ac97, ++ AC97_PCM_LR_ADC_RATE, 0); ++ dma->pcm_open_flag = 0; ++ } + cs5535audio_clear_dma_packets(cs5535au, dma, substream); + return snd_pcm_lib_free_pages(substream); + } +@@ -298,14 +312,12 @@ static int snd_cs5535audio_trigger(struc + break; + case SNDRV_PCM_TRIGGER_RESUME: + dma->ops->enable_dma(cs5535au); +- dma->suspended = 0; + break; + case SNDRV_PCM_TRIGGER_STOP: + dma->ops->disable_dma(cs5535au); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + dma->ops->disable_dma(cs5535au); +- dma->suspended = 1; + break; + default: + snd_printk(KERN_ERR "unhandled trigger\n"); +@@ -344,6 +356,7 @@ static int snd_cs5535audio_capture_open( + int err; + struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; ++ struct snd_ac97 *ac97 = cs5535au->ac97; + + runtime->hw = snd_cs5535audio_capture; + cs5535au->capture_substream = substream; +@@ -352,11 +365,29 @@ static int snd_cs5535audio_capture_open( + if ((err = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS)) < 0) + return err; +- return 0; ++ ++#ifdef CONFIG_OLPC ++ /* Disable Analog Input */ ++ olpc_ai_enable(ac97, 0); ++ /* Enable V_ref bias while recording. */ ++ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<ac97; ++ ++ /* Disable Analog Input */ ++ olpc_ai_enable(ac97, 0); ++ /* Disable V_ref bias. */ ++ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<pcm); ++ snd_ac97_suspend(cs5535au->ac97); + for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) { + struct cs5535audio_dma *dma = &cs5535au->dmas[i]; +- if (dma && dma->substream && !dma->suspended) ++ if (dma && dma->substream) + dma->saved_prd = dma->ops->read_prd(cs5535au); + } +- snd_pcm_suspend_all(cs5535au->pcm); +- snd_ac97_suspend(cs5535au->ac97); + /* save important regs, then disable aclink in hw */ + snd_cs5535audio_stop_hardware(cs5535au); + ++ if (pci_save_state(pci)) { ++ printk(KERN_ERR "cs5535audio: pci_save_state failed!\n"); ++ return -EIO; ++ } + pci_disable_device(pci); +- pci_save_state(pci); + pci_set_power_state(pci, pci_choose_state(pci, state)); + return 0; + } +@@ -89,7 +92,12 @@ int snd_cs5535audio_resume(struct pci_de + int i; + + pci_set_power_state(pci, PCI_D0); +- pci_restore_state(pci); ++ if (pci_restore_state(pci) < 0) { ++ printk(KERN_ERR "cs5535audio: pci_restore_state failed, " ++ "disabling device\n"); ++ snd_card_disconnect(card); ++ return -EIO; ++ } + if (pci_enable_device(pci) < 0) { + printk(KERN_ERR "cs5535audio: pci_enable_device failed, " + "disabling device\n"); +@@ -112,17 +120,17 @@ int snd_cs5535audio_resume(struct pci_de + if (!timeout) + snd_printk(KERN_ERR "Failure getting AC Link ready\n"); + +- /* we depend on ac97 to perform the codec power up */ +- snd_ac97_resume(cs5535au->ac97); + /* set up rate regs, dma. actual initiation is done in trig */ + for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) { + struct cs5535audio_dma *dma = &cs5535au->dmas[i]; +- if (dma && dma->substream && dma->suspended) { ++ if (dma && dma->substream) { + dma->substream->ops->prepare(dma->substream); + dma->ops->setup_prd(cs5535au, dma->saved_prd); + } + } +- ++ ++ /* we depend on ac97 to perform the codec power up */ ++ snd_ac97_resume(cs5535au->ac97); + snd_power_change_state(card, SNDRV_CTL_POWER_D0); + + return 0; diff --git a/target/linux/olpc/patches-2.6.23/200-fix_dcon_id.patch b/target/linux/olpc/patches-2.6.23/200-fix_dcon_id.patch new file mode 100644 index 0000000000..73860f9b84 --- /dev/null +++ b/target/linux/olpc/patches-2.6.23/200-fix_dcon_id.patch @@ -0,0 +1,12 @@ +Index: linux-2.6.23.17/include/linux/i2c-id.h +=================================================================== +--- linux-2.6.23.17.orig/include/linux/i2c-id.h ++++ linux-2.6.23.17/include/linux/i2c-id.h +@@ -119,6 +119,7 @@ + #define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */ + #define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */ + #define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */ ++#define I2C_DRIVERID_DCON 93 + + #define I2C_DRIVERID_I2CDEV 900 + #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */ diff --git a/target/linux/olpc/patches-2.6.23/300-block2mtd_init.patch b/target/linux/olpc/patches-2.6.23/300-block2mtd_init.patch new file mode 100644 index 0000000000..a922b4e2a9 --- /dev/null +++ b/target/linux/olpc/patches-2.6.23/300-block2mtd_init.patch @@ -0,0 +1,235 @@ +Index: linux-2.6.23.17/drivers/mtd/devices/block2mtd.c +=================================================================== +--- linux-2.6.23.17.orig/drivers/mtd/devices/block2mtd.c ++++ linux-2.6.23.17/drivers/mtd/devices/block2mtd.c +@@ -20,6 +20,8 @@ + #include + #include + #include ++#include ++#include + + #define VERSION "$Revision: 1.30 $" + +@@ -27,6 +29,12 @@ + #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) + #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args) + ++struct retry { ++ struct list_head list; ++ const char *val; ++}; ++ ++static LIST_HEAD(retry_list); + + /* Info for the block device */ + struct block2mtd_dev { +@@ -38,10 +46,36 @@ struct block2mtd_dev { + char devname[0]; + }; + ++static int block2mtd_setup2(const char *val); + + /* Static info about the MTD, used in cleanup_module */ + static LIST_HEAD(blkmtd_device_list); + ++static int add_retry(const char *val) ++{ ++ struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL); ++ ++ INIT_LIST_HEAD(&r->list); ++ r->val = val; ++ list_add(&r->list, &retry_list); ++ ++ return 0; ++} ++ ++static int __init process_retries(void) ++{ ++ struct list_head *p, *tmp; ++ ++ list_for_each_safe(p, tmp, &retry_list) { ++ struct retry *r = list_entry(p, struct retry, list); ++ block2mtd_setup2(r->val); ++ msleep(100); ++ list_del(p); ++ kfree(r); ++ } ++ return 0; ++} ++rootfs_initcall(process_retries); + + static struct page *page_read(struct address_space *mapping, int index) + { +@@ -518,7 +552,10 @@ static int block2mtd_setup2(const char * + if (token[2] && (strlen(token[2]) + 1 > 80)) + parse_err("mtd device name too long"); + +- add_device(name, erase_size, token[2]); ++ if (add_device(name, erase_size, token[2]) == NULL) { ++ add_retry(val); ++ return 0; ++ } + + return 0; + } +@@ -534,8 +571,11 @@ static int block2mtd_setup(const char *v + and block2mtd_init() has already been called, + we can parse the argument now. */ + +- if (block2mtd_init_called) ++ if (block2mtd_init_called) { ++ /* if the call failed (e.g. because the device does not exist yet) ++ * then try again just before attempting to mount the rootfs */ + return block2mtd_setup2(val); ++ } + + /* During early boot stage, we only save the parameters + here. We must parse them later: if the param passed +Index: linux-2.6.23.17/init/do_mounts.c +=================================================================== +--- linux-2.6.23.17.orig/init/do_mounts.c ++++ linux-2.6.23.17/init/do_mounts.c +@@ -241,16 +241,8 @@ static int __init fs_names_setup(char *s + return 1; + } + +-static unsigned int __initdata root_delay; +-static int __init root_delay_setup(char *str) +-{ +- root_delay = simple_strtoul(str, NULL, 0); +- return 1; +-} +- + __setup("rootflags=", root_data_setup); + __setup("rootfstype=", fs_names_setup); +-__setup("rootdelay=", root_delay_setup); + + static void __init get_fs_names(char *page) + { +@@ -426,18 +418,6 @@ void __init prepare_namespace(void) + { + int is_floppy; + +- if (root_delay) { +- printk(KERN_INFO "Waiting %dsec before mounting root device...\n", +- root_delay); +- ssleep(root_delay); +- } +- +- /* wait for the known devices to complete their probing */ +- while (driver_probe_done() != 0) +- msleep(100); +- +- md_run_setup(); +- + if (saved_root_name[0]) { + root_device_name = saved_root_name; + if (!strncmp(root_device_name, "mtd", 3)) { +Index: linux-2.6.23.17/init/main.c +=================================================================== +--- linux-2.6.23.17.orig/init/main.c ++++ linux-2.6.23.17/init/main.c +@@ -65,6 +65,7 @@ + #ifdef CONFIG_X86_LOCAL_APIC + #include + #endif ++#include "do_mounts.h" + + /* + * This is one of the first .c files built. Error out early if we have compiler +@@ -662,13 +663,14 @@ static int __init initcall_debug_setup(c + __setup("initcall_debug", initcall_debug_setup); + + extern initcall_t __initcall_start[], __initcall_end[]; ++extern initcall_t __root_initcall_start[], __root_initcall_end[]; + +-static void __init do_initcalls(void) ++static void __init do_initcalls(initcall_t *start, initcall_t *end) + { + initcall_t *call; + int count = preempt_count(); + +- for (call = __initcall_start; call < __initcall_end; call++) { ++ for (call = start; call < end; call++) { + ktime_t t0, t1, delta; + char *msg = NULL; + char msgbuf[40]; +@@ -737,7 +739,7 @@ static void __init do_basic_setup(void) + usermodehelper_init(); + driver_init(); + init_irq_proc(); +- do_initcalls(); ++ do_initcalls(__initcall_start, __initcall_end); + } + + static int __initdata nosoftlockup; +@@ -810,6 +812,14 @@ static int noinline init_post(void) + panic("No init found. Try passing init= option to kernel."); + } + ++static unsigned int __initdata root_delay; ++static int __init root_delay_setup(char *str) ++{ ++ root_delay = simple_strtoul(str, NULL, 0); ++ return 1; ++} ++__setup("rootdelay=", root_delay_setup); ++ + static int __init kernel_init(void * unused) + { + lock_kernel(); +@@ -851,6 +861,17 @@ static int __init kernel_init(void * unu + + if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) { + ramdisk_execute_command = NULL; ++ if (root_delay) { ++ printk(KERN_INFO "Waiting %dsec before mounting root device...\n", ++ root_delay); ++ ssleep(root_delay); ++ } ++ /* wait for the known devices to complete their probing */ ++ while (driver_probe_done() != 0) ++ msleep(100); ++ md_run_setup(); ++ do_initcalls(__root_initcall_start, __root_initcall_end); ++ + prepare_namespace(); + } + +Index: linux-2.6.23.17/arch/i386/kernel/vmlinux.lds.S +=================================================================== +--- linux-2.6.23.17.orig/arch/i386/kernel/vmlinux.lds.S ++++ linux-2.6.23.17/arch/i386/kernel/vmlinux.lds.S +@@ -146,6 +146,11 @@ SECTIONS + INITCALLS + __initcall_end = .; + } ++ .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) { ++ __root_initcall_start = .; ++ INITCALLS_ROOT ++ __root_initcall_end = .; ++ } + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + __con_initcall_start = .; + *(.con_initcall.init) +Index: linux-2.6.23.17/include/asm-generic/vmlinux.lds.h +=================================================================== +--- linux-2.6.23.17.orig/include/asm-generic/vmlinux.lds.h ++++ linux-2.6.23.17/include/asm-generic/vmlinux.lds.h +@@ -243,12 +243,14 @@ + *(.initcall4s.init) \ + *(.initcall5.init) \ + *(.initcall5s.init) \ +- *(.initcallrootfs.init) \ + *(.initcall6.init) \ + *(.initcall6s.init) \ + *(.initcall7.init) \ + *(.initcall7s.init) + ++#define INITCALLS_ROOT \ ++ *(.initcallrootfs.init) ++ + #define PERCPU(align) \ + . = ALIGN(align); \ + __per_cpu_start = .; \ diff --git a/target/linux/olpc/patches-2.6.26/300-block2mtd_init.patch b/target/linux/olpc/patches-2.6.26/300-block2mtd_init.patch new file mode 100644 index 0000000000..2a0d8f6c74 --- /dev/null +++ b/target/linux/olpc/patches-2.6.26/300-block2mtd_init.patch @@ -0,0 +1,213 @@ +diff -urN linux-2.6.26.orig/arch/x86/kernel/vmlinux_32.lds.S linux-2.6.26/arch/x86/kernel/vmlinux_32.lds.S +--- linux-2.6.26.orig/arch/x86/kernel/vmlinux_32.lds.S 2008-08-13 03:51:12.000000000 +0200 ++++ linux-2.6.26/arch/x86/kernel/vmlinux_32.lds.S 2008-08-13 04:08:18.000000000 +0200 +@@ -144,6 +144,12 @@ + INITCALLS + __initcall_end = .; + } ++ .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) { ++ __root_initcall_start = .; ++ INITCALLS_ROOT ++ __root_initcall_end = .; ++ } ++ + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + __con_initcall_start = .; + *(.con_initcall.init) +diff -urN linux-2.6.26.orig/drivers/mtd/devices/block2mtd.c linux-2.6.26/drivers/mtd/devices/block2mtd.c +--- linux-2.6.26.orig/drivers/mtd/devices/block2mtd.c 2008-08-13 03:51:05.000000000 +0200 ++++ linux-2.6.26/drivers/mtd/devices/block2mtd.c 2008-08-13 04:06:43.000000000 +0200 +@@ -20,6 +20,8 @@ + #include + #include + #include ++#include ++#include + + #define VERSION "$Revision: 1.30 $" + +@@ -27,6 +29,12 @@ + #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) + #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args) + ++struct retry { ++ struct list_head list; ++ const char *val; ++}; ++ ++static LIST_HEAD(retry_list); + + /* Info for the block device */ + struct block2mtd_dev { +@@ -38,10 +46,34 @@ + char devname[0]; + }; + ++static int block2mtd_setup2(const char *val); + + /* Static info about the MTD, used in cleanup_module */ + static LIST_HEAD(blkmtd_device_list); + ++static int add_retry(const char *val) { ++ struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL); ++ ++ INIT_LIST_HEAD(&r->list); ++ r->val = val; ++ list_add(&r->list, &retry_list); ++ ++ return 0; ++} ++ ++static int __init process_retries(void) { ++ struct list_head *p, *tmp; ++ ++ list_for_each_safe(p, tmp, &retry_list) { ++ struct retry *r = list_entry(p, struct retry, list); ++ block2mtd_setup2(r->val); ++ msleep(100); ++ list_del(p); ++ kfree(r); ++ } ++ return 0; ++} ++rootfs_initcall(process_retries); + + static struct page *page_read(struct address_space *mapping, int index) + { +@@ -517,7 +549,9 @@ + if (token[2] && (strlen(token[2]) + 1 > 80)) + parse_err("mtd device name too long"); + +- add_device(name, erase_size, token[2]); ++ if (add_device(name, erase_size, token[2]) == NULL) { ++ add_retry(val); ++ } + + return 0; + } +diff -urN linux-2.6.26.orig/include/asm-generic/vmlinux.lds.h linux-2.6.26/include/asm-generic/vmlinux.lds.h +--- linux-2.6.26.orig/include/asm-generic/vmlinux.lds.h 2008-08-13 03:51:08.000000000 +0200 ++++ linux-2.6.26/include/asm-generic/vmlinux.lds.h 2008-08-13 04:09:04.000000000 +0200 +@@ -338,12 +338,14 @@ + *(.initcall4s.init) \ + *(.initcall5.init) \ + *(.initcall5s.init) \ +- *(.initcallrootfs.init) \ + *(.initcall6.init) \ + *(.initcall6s.init) \ + *(.initcall7.init) \ + *(.initcall7s.init) + ++#define INITCALLS_ROOT \ ++ *(.initcallrootfs.init) ++ + #define PERCPU(align) \ + . = ALIGN(align); \ + __per_cpu_start = .; \ +diff -urN linux-2.6.26.orig/init/do_mounts.c linux-2.6.26/init/do_mounts.c +--- linux-2.6.26.orig/init/do_mounts.c 2008-08-13 03:51:11.000000000 +0200 ++++ linux-2.6.26/init/do_mounts.c 2008-08-13 04:00:22.000000000 +0200 +@@ -173,16 +173,8 @@ + return 1; + } + +-static unsigned int __initdata root_delay; +-static int __init root_delay_setup(char *str) +-{ +- root_delay = simple_strtoul(str, NULL, 0); +- return 1; +-} +- + __setup("rootflags=", root_data_setup); + __setup("rootfstype=", fs_names_setup); +-__setup("rootdelay=", root_delay_setup); + + static void __init get_fs_names(char *page) + { +@@ -358,18 +350,6 @@ + { + int is_floppy; + +- if (root_delay) { +- printk(KERN_INFO "Waiting %dsec before mounting root device...\n", +- root_delay); +- ssleep(root_delay); +- } +- +- /* wait for the known devices to complete their probing */ +- while (driver_probe_done() != 0) +- msleep(100); +- +- md_run_setup(); +- + if (saved_root_name[0]) { + root_device_name = saved_root_name; + if (!strncmp(root_device_name, "mtd", 3)) { +diff -urN linux-2.6.26.orig/init/main.c linux-2.6.26/init/main.c +--- linux-2.6.26.orig/init/main.c 2008-08-13 03:51:11.000000000 +0200 ++++ linux-2.6.26/init/main.c 2008-08-13 04:06:01.000000000 +0200 +@@ -70,6 +70,7 @@ + #ifdef CONFIG_X86_LOCAL_APIC + #include + #endif ++#include "do_mounts.h" + + /* + * This is one of the first .c files built. Error out early if we have compiler +@@ -737,12 +738,13 @@ + + + extern initcall_t __initcall_start[], __initcall_end[]; ++extern initcall_t __root_initcall_start[], __root_initcall_end[]; + +-static void __init do_initcalls(void) ++static void __init do_initcalls(initcall_t *start, initcall_t *end) + { + initcall_t *call; + +- for (call = __initcall_start; call < __initcall_end; call++) ++ for (call = start; call < end; call++) + do_one_initcall(*call); + + /* Make sure there is no pending stuff from the initcall sequence */ +@@ -763,7 +765,7 @@ + usermodehelper_init(); + driver_init(); + init_irq_proc(); +- do_initcalls(); ++ do_initcalls(__initcall_start, __initcall_end); + } + + static int __initdata nosoftlockup; +@@ -835,6 +837,13 @@ + panic("No init found. Try passing init= option to kernel."); + } + ++static unsigned int __initdata root_delay; ++static int __init root_delay_setup(char *str) ++{ ++ root_delay = simple_strtoul(str, NULL, 0); ++ return 1; ++} ++__setup("rootdelay=", root_delay_setup); + static int __init kernel_init(void * unused) + { + lock_kernel(); +@@ -875,7 +884,16 @@ + + if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) { + ramdisk_execute_command = NULL; +- prepare_namespace(); ++ if (root_delay) { ++ printk(KERN_INFO "Waiting %desc before mounting root device...\n", ++ root_delay); ++ ssleep(root_delay); ++ } ++ while (driver_probe_done() != 0) ++ msleep(100); ++ md_run_setup(); ++ do_initcalls(__root_initcall_start, __root_initcall_end); ++ prepare_namespace(); + } + + /* diff --git a/target/linux/olpc/patches/100-olpc.patch b/target/linux/olpc/patches/100-olpc.patch deleted file mode 100644 index 4607aeda68..0000000000 --- a/target/linux/olpc/patches/100-olpc.patch +++ /dev/null @@ -1,5880 +0,0 @@ -Index: linux-2.6.23.17/arch/i386/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/arch/i386/Kconfig -+++ linux-2.6.23.17/arch/i386/Kconfig -@@ -796,6 +796,15 @@ config SECCOMP - - If unsure, say Y. Only embedded should say N here. - -+config VGA_NOPROBE -+ bool "Don't probe VGA at boot" if EMBEDDED -+ default n -+ help -+ Saying Y here will cause the kernel to not probe VGA at boot time. -+ This will break everything that depends on the probed screen -+ data. Say N here unless you are absolutely sure this is what you -+ want. -+ - source kernel/Kconfig.hz - - config KEXEC -@@ -1120,6 +1129,9 @@ config PCI_GODIRECT - config PCI_GOANY - bool "Any" - -+config PCI_GOOLPC -+ bool "OLPC" -+ - endchoice - - config PCI_BIOS -@@ -1129,7 +1141,7 @@ config PCI_BIOS - - config PCI_DIRECT - bool -- depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS) -+ depends on PCI && ((PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS) - default y - - config PCI_MMCONFIG -@@ -1137,6 +1149,11 @@ config PCI_MMCONFIG - depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) - default y - -+config PCI_OLPC -+ bool -+ depends on PCI && PCI_GOOLPC -+ default y -+ - source "drivers/pci/pcie/Kconfig" - - source "drivers/pci/Kconfig" -@@ -1206,10 +1223,43 @@ config SCx200HR_TIMER - processor goes idle (as is done by the scheduler). The - other workaround is idle=poll boot option. - -+config GEODE_MFGPT_TIMER -+ bool "Geode Multi-Function General Purpose Timer (mfgpt) Support" -+ depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS -+ default y -+ help -+ This driver provides a clock event source based on the MFGPT -+ timer(s) in the CS5535 and CS5536 companion chip for the geode. -+ MFGPTs have a better resolution and max interval than the -+ generic PIT, and are suitable for use as high-res timers. -+ - config K8_NB - def_bool y - depends on AGP_AMD64 - -+config OLPC -+ bool "OLPC Support" -+ default n -+ help -+ Add support for detecting the unique features of the OLPC -+ Childrens Machine -+ -+config OLPC_PM -+ tristate "OLPC power management support" -+ default y -+ depends on OLPC -+ help -+ Add support for the Geode power management facilities on the -+ OLPC Childrens Machine -+ -+config OPEN_FIRMWARE -+ bool "Support for Open Firmware" -+ default y if OLPC -+ help -+ This option adds support for the implementation of Open Firmware -+ that is used on the OLPC Children's Machine. -+ If unsure, say N here. -+ - source "drivers/pcmcia/Kconfig" - - source "drivers/pci/hotplug/Kconfig" -Index: linux-2.6.23.17/arch/i386/kernel/Makefile -=================================================================== ---- linux-2.6.23.17.orig/arch/i386/kernel/Makefile -+++ linux-2.6.23.17/arch/i386/kernel/Makefile -@@ -39,13 +39,17 @@ obj-$(CONFIG_VM86) += vm86.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - obj-$(CONFIG_HPET_TIMER) += hpet.o - obj-$(CONFIG_K8_NB) += k8.o --obj-$(CONFIG_MGEODE_LX) += geode.o -+obj-$(CONFIG_MGEODE_LX) += geode.o mfgpt.o - - obj-$(CONFIG_VMI) += vmi.o vmiclock.o - obj-$(CONFIG_PARAVIRT) += paravirt.o - obj-y += pcspeaker.o - - obj-$(CONFIG_SCx200) += scx200.o -+obj-$(CONFIG_OLPC) += olpc.o -+obj-$(CONFIG_OLPC_PM) += olpc-pm.o olpc-wakeup.o -+obj-$(CONFIG_OPEN_FIRMWARE) += ofw.o -+obj-$(CONFIG_PROMFS_FS) += prom.o - - # vsyscall.o contains the vsyscall DSO images as __initdata. - # We must build both images before we can assemble it. -Index: linux-2.6.23.17/arch/i386/kernel/geode.c -=================================================================== ---- linux-2.6.23.17.orig/arch/i386/kernel/geode.c -+++ linux-2.6.23.17/arch/i386/kernel/geode.c -@@ -145,10 +145,14 @@ EXPORT_SYMBOL_GPL(geode_gpio_setup_event - - static int __init geode_southbridge_init(void) - { -+ int timers; -+ - if (!is_geode()) - return -ENODEV; - - init_lbars(); -+ timers = geode_mfgpt_detect(); -+ printk(KERN_INFO "geode-mfgpt: %d timers available.\n", timers); - return 0; - } - -Index: linux-2.6.23.17/arch/i386/kernel/head.S -=================================================================== ---- linux-2.6.23.17.orig/arch/i386/kernel/head.S -+++ linux-2.6.23.17/arch/i386/kernel/head.S -@@ -117,8 +117,34 @@ ENTRY(startup_32) - movl $(COMMAND_LINE_SIZE/4),%ecx - rep - movsl -+ -+#ifdef CONFIG_OPEN_FIRMWARE -+/* -+ * If Open Firmware booted us, save the OFW client interface callback address -+ * and preserve the OFW page mappings by priming the kernel's new page -+ * directory area with a copy of the OFW page directory. That lets OFW stay -+ * resident in high memory (high in both the virtual and physical spaces) -+ * for at least long enough to copy out the device tree. -+ */ - 1: -+ movl $(boot_params - __PAGE_OFFSET + OFW_INFO_OFFSET), %ebp -+ cmpl $0x2057464F, (%ebp) /* Magic number "OFW " */ -+ jne 1f -+ -+ mov 0x8(%ebp), %eax /* Save callback address */ -+ mov %eax, call_firmware - __PAGE_OFFSET -+ -+ /* Copy the OFW pdir into swapper_pg_dir */ -+ movl %esi, %edx /* save %esi */ -+ movl $(swapper_pg_dir - __PAGE_OFFSET), %edi -+ movl %cr3, %esi /* Source is current pg_dir base address */ -+ movl $1024, %ecx /* Number of page directory entries */ -+ rep -+ movsl -+ movl %edx, %esi /* restore %esi */ -+#endif - -+1: - /* - * Initialize page tables. This creates a PDE and a set of page - * tables, which are located immediately beyond _end. The variable -@@ -129,6 +155,7 @@ ENTRY(startup_32) - * Warning: don't use %esi or the stack in this code. However, %esp - * can be used as a GPR if you really need it... - */ -+ - page_pde_offset = (__PAGE_OFFSET >> 20); - - movl $(pg0 - __PAGE_OFFSET), %edi -Index: linux-2.6.23.17/arch/i386/kernel/setup.c -=================================================================== ---- linux-2.6.23.17.orig/arch/i386/kernel/setup.c -+++ linux-2.6.23.17/arch/i386/kernel/setup.c -@@ -362,8 +362,10 @@ void __init zone_sizes_init(void) - { - unsigned long max_zone_pfns[MAX_NR_ZONES]; - memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); -+#ifdef CONFIG_ZONE_DMA - max_zone_pfns[ZONE_DMA] = - virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; -+#endif - max_zone_pfns[ZONE_NORMAL] = max_low_pfn; - #ifdef CONFIG_HIGHMEM - max_zone_pfns[ZONE_HIGHMEM] = highend_pfn; -@@ -428,6 +430,9 @@ void __init setup_bootmem_allocator(void - */ - acpi_reserve_bootmem(); - #endif -+#ifdef CONFIG_OLPC_PM -+ reserve_bootmem(0xf0000, PAGE_SIZE); -+#endif - #ifdef CONFIG_X86_FIND_SMP_CONFIG - /* - * Find and reserve possible boot-time SMP configuration: -Index: linux-2.6.23.17/arch/i386/pci/Makefile -=================================================================== ---- linux-2.6.23.17.orig/arch/i386/pci/Makefile -+++ linux-2.6.23.17/arch/i386/pci/Makefile -@@ -3,6 +3,7 @@ obj-y := i386.o init.o - obj-$(CONFIG_PCI_BIOS) += pcbios.o - obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o - obj-$(CONFIG_PCI_DIRECT) += direct.o -+obj-$(CONFIG_PCI_OLPC) += olpc.o - - pci-y := fixup.o - pci-$(CONFIG_ACPI) += acpi.o -Index: linux-2.6.23.17/arch/i386/pci/init.c -=================================================================== ---- linux-2.6.23.17.orig/arch/i386/pci/init.c -+++ linux-2.6.23.17/arch/i386/pci/init.c -@@ -14,6 +14,9 @@ static __init int pci_access_init(void) - #ifdef CONFIG_PCI_MMCONFIG - pci_mmcfg_init(type); - #endif -+#ifdef CONFIG_PCI_OLPC -+ pci_olpc_init(); -+#endif - if (raw_pci_ops) - return 0; - #ifdef CONFIG_PCI_BIOS -Index: linux-2.6.23.17/arch/i386/pci/pci.h -=================================================================== ---- linux-2.6.23.17.orig/arch/i386/pci/pci.h -+++ linux-2.6.23.17/arch/i386/pci/pci.h -@@ -93,6 +93,7 @@ extern void pci_direct_init(int type); - extern void pci_pcbios_init(void); - extern void pci_mmcfg_init(int type); - extern void pcibios_sort(void); -+extern void pci_olpc_init(void); - - /* pci-mmconfig.c */ - -Index: linux-2.6.23.17/drivers/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/Makefile -+++ linux-2.6.23.17/drivers/Makefile -@@ -23,6 +23,8 @@ obj-y += char/ - - obj-$(CONFIG_CONNECTOR) += connector/ - -+obj-$(CONFIG_SYSPROF) += sysprof/ -+ - # i810fb and intelfb depend on char/agp/ - obj-$(CONFIG_FB_I810) += video/i810/ - obj-$(CONFIG_FB_INTEL) += video/intelfb/ -Index: linux-2.6.23.17/drivers/char/vt_ioctl.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/char/vt_ioctl.c -+++ linux-2.6.23.17/drivers/char/vt_ioctl.c -@@ -37,6 +37,9 @@ - char vt_dont_switch; - extern struct tty_driver *console_driver; - -+/* Add a notifier chain to inform drivers of a VT_TEXT/VT_GRAPHICS switch */ -+RAW_NOTIFIER_HEAD(console_notifier_list); -+ - #define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count) - #define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons) - -@@ -491,6 +494,14 @@ int vt_ioctl(struct tty_struct *tty, str - vc->vc_mode = (unsigned char) arg; - if (console != fg_console) - return 0; -+ -+ /* Notify listeners if the current fg_console has switched */ -+ -+ raw_notifier_call_chain(&console_notifier_list, -+ (arg == KD_TEXT) ? -+ CONSOLE_EVENT_SWITCH_TEXT : -+ CONSOLE_EVENT_SWITCH_GRAPHICS, 0); -+ - /* - * explicitly blank/unblank the screen if switching modes - */ -Index: linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/i2c/busses/scx200_acb.c -+++ linux-2.6.23.17/drivers/i2c/busses/scx200_acb.c -@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820, - module_param_array(base, int, NULL, 0); - MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers"); - -+static unsigned int smbclk = 0x70; -+module_param(smbclk, uint, 0); -+MODULE_PARM_DESC(smbclk, "Specify the SMB_CLK value"); -+ - #define POLL_TIMEOUT (HZ/5) - - enum scx200_acb_state { -@@ -108,6 +112,7 @@ struct scx200_acb_iface { - #define ACBADDR (iface->base + 4) - #define ACBCTL2 (iface->base + 5) - #define ACBCTL2_ENABLE 0x01 -+#define ACBCTL3 (iface->base + 6) - - /************************************************************************/ - -@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struc - { - u8 val; - -- /* Disable the ACCESS.bus device and Configure the SCL -- frequency: 16 clock cycles */ -- outb(0x70, ACBCTL2); -+ /* Disable the ACCESS.bus device and Configure the SCL */ -+ -+ outb((smbclk & 0x7F) << 1, ACBCTL2); -+ -+ outb((smbclk >> 7) & 0xFF, ACBCTL3); - -- if (inb(ACBCTL2) != 0x70) { -+ if (inb(ACBCTL2) != ((smbclk & 0x7F) << 1)) { - pr_debug(NAME ": ACBCTL2 readback failed\n"); - return -ENXIO; - } -Index: linux-2.6.23.17/drivers/input/keyboard/atkbd.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/input/keyboard/atkbd.c -+++ linux-2.6.23.17/drivers/input/keyboard/atkbd.c -@@ -63,12 +63,25 @@ static int atkbd_extra; - module_param_named(extra, atkbd_extra, bool, 0); - MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); - -+#define ATKBD_KEY_UNKNOWN 0 -+#define ATKBD_KEY_NULL 0xFF0000FF -+ -+#define ATKBD_SCR_1 0xFF0000FE -+#define ATKBD_SCR_2 0xFF0000FD -+#define ATKBD_SCR_4 0xFF0000FC -+#define ATKBD_SCR_8 0xFF0000FB -+#define ATKBD_SCR_CLICK 0xFF0000FA -+#define ATKBD_SCR_LEFT 0xFF0000F9 -+#define ATKBD_SCR_RIGHT 0xFF0000F8 -+ -+#define ATKBD_SPECIAL 0xFF0000F8 -+ - /* - * Scancode to keycode tables. These are just the default setting, and - * are loadable via an userland utility. - */ - --static unsigned char atkbd_set2_keycode[512] = { -+static unsigned int atkbd_set2_keycode[512] = { - - #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES - -@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[ - 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99, - - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -- 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125, -+ -+ 217,100,ATKBD_KEY_NULL, 0, 97,165, 0, 0, -+ 156, 0, 0, 0, 0, 0, 0,125, -+ - 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127, - 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142, - 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0, -- 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0, -+ -+ 226, 0, 0, 0, 0, 0, 0, 0, -+ 0,ATKBD_KEY_NULL, 96, 0, 0, 0,143, 0, -+ - 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112, - 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0, - -@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table - #define ATKBD_RET_HANGEUL 0xf2 - #define ATKBD_RET_ERR 0xff - --#define ATKBD_KEY_UNKNOWN 0 --#define ATKBD_KEY_NULL 255 -- --#define ATKBD_SCR_1 254 --#define ATKBD_SCR_2 253 --#define ATKBD_SCR_4 252 --#define ATKBD_SCR_8 251 --#define ATKBD_SCR_CLICK 250 --#define ATKBD_SCR_LEFT 249 --#define ATKBD_SCR_RIGHT 248 -- --#define ATKBD_SPECIAL 248 -- - #define ATKBD_LED_EVENT_BIT 0 - #define ATKBD_REP_EVENT_BIT 1 - -@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table - #define ATKBD_XL_HANJA 0x20 - - static struct { -- unsigned char keycode; -+ unsigned int keycode; - unsigned char set2; - } atkbd_scroll_keys[] = { - { ATKBD_SCR_1, 0xc5 }, -@@ -200,7 +206,7 @@ struct atkbd { - char phys[32]; - - unsigned short id; -- unsigned char keycode[512]; -+ unsigned int keycode[512]; - unsigned char set; - unsigned char translated; - unsigned char extra; -@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struc - unsigned int code = data; - int scroll = 0, hscroll = 0, click = -1, add_release_event = 0; - int value; -- unsigned char keycode; -+ unsigned int keycode; - - #ifdef ATKBD_DEBUG - printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags); -@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(stru - atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode; - } - } else if (atkbd->set == 3) { -- memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode)); -+ for (i = 0; i < ARRAY_SIZE(atkbd_set3_keycode); i++) -+ atkbd->keycode[i] = atkbd_set3_keycode[i]; - } else { -- memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode)); -+ for (i = 0; i < ARRAY_SIZE(atkbd_set2_keycode); i++) -+ atkbd->keycode[i] = atkbd_set2_keycode[i]; - - if (atkbd->scroll) - for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) -@@ -925,8 +933,8 @@ static void atkbd_set_device_attrs(struc - } - - input_dev->keycode = atkbd->keycode; -- input_dev->keycodesize = sizeof(unsigned char); -- input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); -+ input_dev->keycodesize = sizeof(unsigned int); -+ input_dev->keycodemax = ARRAY_SIZE(atkbd->keycode); - - for (i = 0; i < 512; i++) - if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL) -@@ -1017,6 +1025,10 @@ static int atkbd_connect(struct serio *s - return err; - } - -+#ifdef CONFIG_OLPC -+#include -+#endif -+ - /* - * atkbd_reconnect() tries to restore keyboard into a sane state and is - * most likely called on resume. -@@ -1027,6 +1039,12 @@ static int atkbd_reconnect(struct serio - struct atkbd *atkbd = serio_get_drvdata(serio); - struct serio_driver *drv = serio->drv; - -+#ifdef CONFIG_OLPC -+ if (olpc_rev_after(OLPC_REV_B2)) -+ if (serio->dev.power.power_state.event != PM_EVENT_ON) -+ return 0; -+#endif -+ - if (!atkbd || !drv) { - printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n"); - return -1; -Index: linux-2.6.23.17/drivers/input/mouse/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/input/mouse/Kconfig -+++ linux-2.6.23.17/drivers/input/mouse/Kconfig -@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT - - If unsure, say N. - -+config MOUSE_PS2_OLPC -+ bool "OLPC PS/2 mouse protocol extension" if EMBEDDED -+ default n -+ depends on MOUSE_PS2 && OLPC -+ ---help--- -+ Say Y here if you have an OLPC PS/2 touchpad connected to -+ your system. -+ -+ If unsure, say N. -+ - config MOUSE_SERIAL - tristate "Serial mouse" - select SERIO -Index: linux-2.6.23.17/drivers/input/mouse/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/input/mouse/Makefile -+++ linux-2.6.23.17/drivers/input/mouse/Makefile -@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += - psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o - psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o - psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o -+psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o -Index: linux-2.6.23.17/drivers/input/mouse/psmouse-base.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/input/mouse/psmouse-base.c -+++ linux-2.6.23.17/drivers/input/mouse/psmouse-base.c -@@ -26,6 +26,7 @@ - #include "synaptics.h" - #include "logips2pp.h" - #include "alps.h" -+#include "olpc.h" - #include "lifebook.h" - #include "trackpoint.h" - #include "touchkit_ps2.h" -@@ -103,7 +104,7 @@ static struct attribute_group psmouse_at - */ - static DEFINE_MUTEX(psmouse_mutex); - --static struct workqueue_struct *kpsmoused_wq; -+struct workqueue_struct *kpsmoused_wq; - - struct psmouse_protocol { - enum psmouse_type type; -@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(str - goto out; - } - -- if (psmouse->packet[1] == PSMOUSE_RET_ID) { -+ if (psmouse->packet[1] == PSMOUSE_RET_ID || psmouse->packet[1] == PSMOUSE_RET_BAT) { - __psmouse_set_state(psmouse, PSMOUSE_IGNORE); - serio_reconnect(serio); - goto out; -@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psm - } - } - -+/* -+ * Try OLPC touchpad. -+ */ - if (max_proto > PSMOUSE_IMEX) { -+ if (olpc_detect(psmouse, set_properties) == 0) { -+ if (!set_properties || olpc_init(psmouse) == 0) -+ return PSMOUSE_OLPC; -+/* -+ * Init failed, try basic relative protocols -+ */ -+ max_proto = PSMOUSE_IMEX; -+ } -+ } - -+ if (max_proto > PSMOUSE_IMEX) { - if (genius_detect(psmouse, set_properties) == 0) - return PSMOUSE_GENPS; - -@@ -762,6 +776,14 @@ static const struct psmouse_protocol psm - .detect = touchkit_ps2_detect, - }, - #endif -+#ifdef CONFIG_MOUSE_PS2_OLPC -+ { -+ .type = PSMOUSE_OLPC, -+ .name = "OLPC", -+ .alias = "olpc", -+ .detect = olpc_detect, -+ }, -+#endif - { - .type = PSMOUSE_CORTRON, - .name = "CortronPS/2", -Index: linux-2.6.23.17/drivers/input/mouse/psmouse.h -=================================================================== ---- linux-2.6.23.17.orig/drivers/input/mouse/psmouse.h -+++ linux-2.6.23.17/drivers/input/mouse/psmouse.h -@@ -89,6 +89,7 @@ enum psmouse_type { - PSMOUSE_TRACKPOINT, - PSMOUSE_TOUCHKIT_PS2, - PSMOUSE_CORTRON, -+ PSMOUSE_OLPC, - PSMOUSE_AUTO /* This one should always be last */ - }; - -@@ -96,6 +97,7 @@ int psmouse_sliced_command(struct psmous - int psmouse_reset(struct psmouse *psmouse); - void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution); - -+extern struct workqueue_struct *kpsmoused_wq; - - struct psmouse_attribute { - struct device_attribute dattr; -Index: linux-2.6.23.17/drivers/input/serio/i8042.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/input/serio/i8042.c -+++ linux-2.6.23.17/drivers/input/serio/i8042.c -@@ -868,6 +868,11 @@ static long i8042_panic_blink(long count - #undef DELAY - - #ifdef CONFIG_PM -+ -+#ifdef CONFIG_OLPC -+#include -+#endif -+ - /* - * Here we try to restore the original BIOS settings. We only want to - * do that once, when we really suspend, not when we taking memory -@@ -878,8 +883,15 @@ static long i8042_panic_blink(long count - static int i8042_suspend(struct platform_device *dev, pm_message_t state) - { - if (dev->dev.power.power_state.event != state.event) { -+#ifdef CONFIG_OLPC -+ /* Anything newer than B2 remains powered; no reset needed */ -+ if (olpc_rev_before(OLPC_REV_PRE_B3)) { -+#endif - if (state.event == PM_EVENT_SUSPEND) - i8042_controller_reset(); -+#ifdef CONFIG_OLPC -+ } -+#endif - - dev->dev.power.power_state = state; - } -@@ -902,9 +914,15 @@ static int i8042_resume(struct platform_ - if (dev->dev.power.power_state.event == PM_EVENT_ON) - return 0; - -+#ifdef CONFIG_OLPC -+ if (olpc_rev_before(OLPC_REV_PRE_B3)) { -+#endif - error = i8042_controller_check(); - if (error) - return error; -+#ifdef CONFIG_OLPC -+ } -+#endif - - error = i8042_controller_selftest(); - if (error) -Index: linux-2.6.23.17/drivers/input/serio/serio.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/input/serio/serio.c -+++ linux-2.6.23.17/drivers/input/serio/serio.c -@@ -916,11 +916,22 @@ static int serio_uevent(struct device *d - #endif /* CONFIG_HOTPLUG */ - - #ifdef CONFIG_PM -+ -+#ifdef CONFIG_OLPC -+#include -+#endif -+ - static int serio_suspend(struct device *dev, pm_message_t state) - { - if (dev->power.power_state.event != state.event) { -+#ifdef CONFIG_OLPC -+ if (olpc_rev_before(OLPC_REV_PRE_B3)) { -+#endif - if (state.event == PM_EVENT_SUSPEND) - serio_cleanup(to_serio_port(dev)); -+#ifdef CONFIG_OLPC -+ } -+#endif - - dev->power.power_state = state; - } -Index: linux-2.6.23.17/drivers/media/video/cafe_ccic.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/media/video/cafe_ccic.c -+++ linux-2.6.23.17/drivers/media/video/cafe_ccic.c -@@ -63,13 +63,13 @@ MODULE_SUPPORTED_DEVICE("Video"); - */ - - #define MAX_DMA_BUFS 3 --static int alloc_bufs_at_load = 0; --module_param(alloc_bufs_at_load, bool, 0444); --MODULE_PARM_DESC(alloc_bufs_at_load, -- "Non-zero value causes DMA buffers to be allocated at module " -- "load time. This increases the chances of successfully getting " -- "those buffers, but at the cost of nailing down the memory from " -- "the outset."); -+static int alloc_bufs_at_read = 0; -+module_param(alloc_bufs_at_read, bool, 0444); -+MODULE_PARM_DESC(alloc_bufs_at_read, -+ "Non-zero value causes DMA buffers to be allocated when the " -+ "video capture device is read, rather than at module load " -+ "time. This saves memory, but decreases the chances of " -+ "successfully getting those buffers."); - - static int n_dma_bufs = 3; - module_param(n_dma_bufs, uint, 0644); -@@ -370,6 +370,10 @@ static int cafe_smbus_write_data(struct - rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); - cafe_reg_write(cam, REG_TWSIC1, rval); - spin_unlock_irqrestore(&cam->dev_lock, flags); -+ mdelay(2); /* It'll probably take about 900µs anyway, and the -+ CAFÉ is apparently quite sensitive to being poked -+ at this point. If we can work out precisely what's -+ going on and reduce this delay, it would be nice. */ - - /* - * Time to wait for the write to complete. THIS IS A RACY -@@ -1503,7 +1507,7 @@ static int cafe_v4l_release(struct inode - } - if (cam->users == 0) { - cafe_ctlr_power_down(cam); -- if (! alloc_bufs_at_load) -+ if (alloc_bufs_at_read) - cafe_free_dma_bufs(cam); - } - mutex_unlock(&cam->s_mutex); -@@ -2162,7 +2166,7 @@ static int cafe_pci_probe(struct pci_dev - /* - * If so requested, try to get our DMA buffers now. - */ -- if (alloc_bufs_at_load) { -+ if (!alloc_bufs_at_read) { - if (cafe_alloc_dma_bufs(cam, 1)) - cam_warn(cam, "Unable to alloc DMA buffers at load" - " will try again later."); -Index: linux-2.6.23.17/drivers/misc/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/misc/Kconfig -+++ linux-2.6.23.17/drivers/misc/Kconfig -@@ -202,5 +202,10 @@ config THINKPAD_ACPI_BAY - - If you are not sure, say Y here. - -+config EEPROM_93CX6 -+ tristate "EEPROM 93CX6 support" -+ ---help--- -+ This is a driver for the EEPROM chipsets 93c46 and 93c66. -+ The driver supports both read as well as write commands. - - endif # MISC_DEVICES -Index: linux-2.6.23.17/drivers/mmc/host/sdhci.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mmc/host/sdhci.c -+++ linux-2.6.23.17/drivers/mmc/host/sdhci.c -@@ -411,6 +411,12 @@ static void sdhci_prepare_data(struct sd - break; - } - -+ /* -+ * There's an off-by-one error in the hw that we need to -+ * compensate for. -+ */ -+ count++; -+ - if (count >= 0xF) { - printk(KERN_WARNING "%s: Too large timeout requested!\n", - mmc_hostname(host->mmc)); -@@ -676,19 +682,17 @@ static void sdhci_set_power(struct sdhci - if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) - writeb(0, host->ioaddr + SDHCI_POWER_CONTROL); - -- pwr = SDHCI_POWER_ON; -- - switch (1 << power) { - case MMC_VDD_165_195: -- pwr |= SDHCI_POWER_180; -+ pwr = SDHCI_POWER_180; - break; - case MMC_VDD_29_30: - case MMC_VDD_30_31: -- pwr |= SDHCI_POWER_300; -+ pwr = SDHCI_POWER_300; - break; - case MMC_VDD_32_33: - case MMC_VDD_33_34: -- pwr |= SDHCI_POWER_330; -+ pwr = SDHCI_POWER_330; - break; - default: - BUG(); -@@ -696,6 +700,10 @@ static void sdhci_set_power(struct sdhci - - writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); - -+ pwr |= SDHCI_POWER_ON; -+ -+ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); -+ - out: - host->power = power; - } -Index: linux-2.6.23.17/drivers/mtd/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/Kconfig -+++ linux-2.6.23.17/drivers/mtd/Kconfig -@@ -288,6 +288,14 @@ config SSFDC - This enables read only access to SmartMedia formatted NAND - flash. You can mount it with FAT file system. - -+config MTD_OOPS -+ tristate "Log panic/oops to an MTD buffer" -+ depends on MTD -+ help -+ This enables panic and oops messages to be logged to a circular -+ buffer in a flash partition where it can be read back at some -+ later point. -+ - source "drivers/mtd/chips/Kconfig" - - source "drivers/mtd/maps/Kconfig" -Index: linux-2.6.23.17/drivers/mtd/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/Makefile -+++ linux-2.6.23.17/drivers/mtd/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_NFTL) += nftl.o - obj-$(CONFIG_INFTL) += inftl.o - obj-$(CONFIG_RFD_FTL) += rfd_ftl.o - obj-$(CONFIG_SSFDC) += ssfdc.o -+obj-$(CONFIG_MTD_OOPS) += mtdoops.o - - nftl-objs := nftlcore.o nftlmount.o - inftl-objs := inftlcore.o inftlmount.o -Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0001.c -+++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0001.c -@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup( - struct cfi_pri_intelext *extp = cfi->cmdset_priv; - - /* -- * Probing of multi-partition flash ships. -+ * Probing of multi-partition flash chips. - * - * To support multiple partitions when available, we simply arrange - * for each of them to have their own flchip structure even if they -@@ -1781,7 +1781,7 @@ static int __xipram do_erase_oneblock(st - return ret; - } - --int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) -+static int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) - { - unsigned long ofs, len; - int ret; -@@ -1931,7 +1931,7 @@ static int cfi_intelext_lock(struct mtd_ - printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n", - __FUNCTION__, ofs, len); - cfi_varsize_frob(mtd, do_printlockstatus_oneblock, -- ofs, len, 0); -+ ofs, len, NULL); - #endif - - ret = cfi_varsize_frob(mtd, do_xxlock_oneblock, -@@ -1941,7 +1941,7 @@ static int cfi_intelext_lock(struct mtd_ - printk(KERN_DEBUG "%s: lock status after, ret=%d\n", - __FUNCTION__, ret); - cfi_varsize_frob(mtd, do_printlockstatus_oneblock, -- ofs, len, 0); -+ ofs, len, NULL); - #endif - - return ret; -@@ -1955,7 +1955,7 @@ static int cfi_intelext_unlock(struct mt - printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n", - __FUNCTION__, ofs, len); - cfi_varsize_frob(mtd, do_printlockstatus_oneblock, -- ofs, len, 0); -+ ofs, len, NULL); - #endif - - ret = cfi_varsize_frob(mtd, do_xxlock_oneblock, -@@ -1965,7 +1965,7 @@ static int cfi_intelext_unlock(struct mt - printk(KERN_DEBUG "%s: lock status after, ret=%d\n", - __FUNCTION__, ret); - cfi_varsize_frob(mtd, do_printlockstatus_oneblock, -- ofs, len, 0); -+ ofs, len, NULL); - #endif - - return ret; -@@ -2256,7 +2256,7 @@ static void cfi_intelext_save_locks(stru - adr = region->offset + block * len; - - status = cfi_varsize_frob(mtd, -- do_getlockstatus_oneblock, adr, len, 0); -+ do_getlockstatus_oneblock, adr, len, NULL); - if (status) - set_bit(block, region->lockmap); - else -Index: linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/chips/cfi_cmdset_0002.c -+++ linux-2.6.23.17/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1617,7 +1617,7 @@ static int __xipram do_erase_oneblock(st - } - - --int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) -+static int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) - { - unsigned long ofs, len; - int ret; -Index: linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/chips/jedec_probe.c -+++ linux-2.6.23.17/drivers/mtd/chips/jedec_probe.c -@@ -70,6 +70,7 @@ - - /* Fujitsu */ - #define MBM29F040C 0x00A4 -+#define MBM29F800BA 0x2258 - #define MBM29LV650UE 0x22D7 - #define MBM29LV320TE 0x22F6 - #define MBM29LV320BE 0x22F9 -@@ -129,6 +130,7 @@ - #define LH28F640BF 0x00b0 - - /* ST - www.st.com */ -+#define M29F800AB 0x0058 - #define M29W800DT 0x00D7 - #define M29W800DB 0x005B - #define M29W160DT 0x22C4 -@@ -646,6 +648,23 @@ static const struct amd_flash_info jedec - } - }, { - .mfr_id = MANUFACTURER_FUJITSU, -+ .dev_id = MBM29F800BA, -+ .name = "Fujitsu MBM29F800BA", -+ .uaddr = { -+ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */ -+ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */ -+ }, -+ .DevSize = SIZE_1MiB, -+ .CmdSet = P_ID_AMD_STD, -+ .NumEraseRegions= 4, -+ .regions = { -+ ERASEINFO(0x04000,1), -+ ERASEINFO(0x02000,2), -+ ERASEINFO(0x08000,1), -+ ERASEINFO(0x10000,15), -+ } -+ }, { -+ .mfr_id = MANUFACTURER_FUJITSU, - .dev_id = MBM29LV650UE, - .name = "Fujitsu MBM29LV650UE", - .uaddr = { -@@ -1510,6 +1529,23 @@ static const struct amd_flash_info jedec - ERASEINFO(0x1000,256) - } - -+ }, { -+ .mfr_id = MANUFACTURER_ST, -+ .dev_id = M29F800AB, -+ .name = "ST M29F800AB", -+ .uaddr = { -+ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */ -+ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */ -+ }, -+ .DevSize = SIZE_1MiB, -+ .CmdSet = P_ID_AMD_STD, -+ .NumEraseRegions= 4, -+ .regions = { -+ ERASEINFO(0x04000,1), -+ ERASEINFO(0x02000,2), -+ ERASEINFO(0x08000,1), -+ ERASEINFO(0x10000,15), -+ } - }, { - .mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */ - .dev_id = M29W800DT, -Index: linux-2.6.23.17/drivers/mtd/devices/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/devices/Kconfig -+++ linux-2.6.23.17/drivers/mtd/devices/Kconfig -@@ -69,12 +69,21 @@ config MTD_DATAFLASH26 - If you have such a board and such a DataFlash, say 'Y'. - - config MTD_M25P80 -- tristate "Support for M25 SPI Flash" -+ tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" - depends on SPI_MASTER && EXPERIMENTAL - help -- This enables access to ST M25P80 and similar SPI flash chips, -- used for program and data storage. Set up your spi devices -- with the right board-specific platform data. -+ This enables access to most modern SPI flash chips, used for -+ program and data storage. Series supported include Atmel AT26DF, -+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips -+ are supported as well. See the driver source for the current list, -+ or to add other chips. -+ -+ Note that the original DataFlash chips (AT45 series, not AT26DF), -+ need an entirely different driver. -+ -+ Set up your spi devices with the right board-specific platform data, -+ if you want to specify device partitioning or to use a device which -+ doesn't support the JEDEC ID instruction. - - config MTD_SLRAM - tristate "Uncached system RAM" -Index: linux-2.6.23.17/drivers/mtd/devices/m25p80.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/devices/m25p80.c -+++ linux-2.6.23.17/drivers/mtd/devices/m25p80.c -@@ -1,5 +1,5 @@ - /* -- * MTD SPI driver for ST M25Pxx flash chips -+ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips - * - * Author: Mike Lavender, mike@steroidmicros.com - * -@@ -19,33 +19,32 @@ - #include - #include - #include --#include -+#include -+ - #include - #include -+ - #include - #include - --#include -- -- --/* NOTE: AT 25F and SST 25LF series are very similar, -- * but commands for sector erase and chip id differ... -- */ - - #define FLASH_PAGESIZE 256 - - /* Flash opcodes. */ --#define OPCODE_WREN 6 /* Write enable */ --#define OPCODE_RDSR 5 /* Read status register */ --#define OPCODE_READ 3 /* Read data bytes */ --#define OPCODE_PP 2 /* Page program */ --#define OPCODE_SE 0xd8 /* Sector erase */ --#define OPCODE_RES 0xab /* Read Electronic Signature */ -+#define OPCODE_WREN 0x06 /* Write enable */ -+#define OPCODE_RDSR 0x05 /* Read status register */ -+#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */ -+#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ -+#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ -+#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ -+#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ -+#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ - #define OPCODE_RDID 0x9f /* Read JEDEC ID */ - - /* Status Register bits. */ - #define SR_WIP 1 /* Write in progress */ - #define SR_WEL 2 /* Write enable latch */ -+/* meaning of other SR_* bits may differ between vendors */ - #define SR_BP0 4 /* Block protect 0 */ - #define SR_BP1 8 /* Block protect 1 */ - #define SR_BP2 0x10 /* Block protect 2 */ -@@ -65,9 +64,10 @@ - - struct m25p { - struct spi_device *spi; -- struct semaphore lock; -+ struct mutex lock; - struct mtd_info mtd; -- unsigned partitioned; -+ unsigned partitioned:1; -+ u8 erase_opcode; - u8 command[4]; - }; - -@@ -150,8 +150,9 @@ static int wait_till_ready(struct m25p * - */ - static int erase_sector(struct m25p *flash, u32 offset) - { -- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s at 0x%08x\n", flash->spi->dev.bus_id, -- __FUNCTION__, offset); -+ DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n", -+ flash->spi->dev.bus_id, __FUNCTION__, -+ flash->mtd.erasesize / 1024, offset); - - /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) -@@ -161,7 +162,7 @@ static int erase_sector(struct m25p *fla - write_enable(flash); - - /* Set up command buffer. */ -- flash->command[0] = OPCODE_SE; -+ flash->command[0] = flash->erase_opcode; - flash->command[1] = offset >> 16; - flash->command[2] = offset >> 8; - flash->command[3] = offset; -@@ -201,13 +202,17 @@ static int m25p80_erase(struct mtd_info - addr = instr->addr; - len = instr->len; - -- down(&flash->lock); -+ mutex_lock(&flash->lock); -+ -+ /* REVISIT in some cases we could speed up erasing large regions -+ * by using OPCODE_SE instead of OPCODE_BE_4K -+ */ - - /* now erase those sectors */ - while (len) { - if (erase_sector(flash, addr)) { - instr->state = MTD_ERASE_FAILED; -- up(&flash->lock); -+ mutex_unlock(&flash->lock); - return -EIO; - } - -@@ -215,7 +220,7 @@ static int m25p80_erase(struct mtd_info - len -= mtd->erasesize; - } - -- up(&flash->lock); -+ mutex_unlock(&flash->lock); - - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); -@@ -260,16 +265,19 @@ static int m25p80_read(struct mtd_info * - if (retlen) - *retlen = 0; - -- down(&flash->lock); -+ mutex_lock(&flash->lock); - - /* Wait till previous write/erase is done. */ - if (wait_till_ready(flash)) { - /* REVISIT status return?? */ -- up(&flash->lock); -+ mutex_unlock(&flash->lock); - return 1; - } - -- /* NOTE: OPCODE_FAST_READ (if available) is faster... */ -+ /* FIXME switch to OPCODE_FAST_READ. It's required for higher -+ * clocks; and at this writing, every chip this driver handles -+ * supports that opcode. -+ */ - - /* Set up the write data buffer. */ - flash->command[0] = OPCODE_READ; -@@ -281,7 +289,7 @@ static int m25p80_read(struct mtd_info * - - *retlen = m.actual_length - sizeof(flash->command); - -- up(&flash->lock); -+ mutex_unlock(&flash->lock); - - return 0; - } -@@ -323,7 +331,7 @@ static int m25p80_write(struct mtd_info - t[1].tx_buf = buf; - spi_message_add_tail(&t[1], &m); - -- down(&flash->lock); -+ mutex_lock(&flash->lock); - - /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) -@@ -381,10 +389,10 @@ static int m25p80_write(struct mtd_info - if (retlen) - *retlen += m.actual_length - - sizeof(flash->command); -- } -- } -+ } -+ } - -- up(&flash->lock); -+ mutex_unlock(&flash->lock); - - return 0; - } -@@ -398,24 +406,118 @@ static int m25p80_write(struct mtd_info - - struct flash_info { - char *name; -- u8 id; -- u16 jedec_id; -+ -+ /* JEDEC id zero means "no ID" (most older chips); otherwise it has -+ * a high byte of zero plus three data bytes: the manufacturer id, -+ * then a two byte device id. -+ */ -+ u32 jedec_id; -+ -+ /* The size listed here is what works with OPCODE_SE, which isn't -+ * necessarily called a "sector" by the vendor. -+ */ - unsigned sector_size; -- unsigned n_sectors; -+ u16 n_sectors; -+ -+ u16 flags; -+#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */ - }; - -+ -+/* NOTE: double check command sets and memory organization when you add -+ * more flash chips. This current list focusses on newer chips, which -+ * have been converging on command sets which including JEDEC ID. -+ */ - static struct flash_info __devinitdata m25p_data [] = { -- /* REVISIT: fill in JEDEC ids, for parts that have them */ -- { "m25p05", 0x05, 0x2010, 32 * 1024, 2 }, -- { "m25p10", 0x10, 0x2011, 32 * 1024, 4 }, -- { "m25p20", 0x11, 0x2012, 64 * 1024, 4 }, -- { "m25p40", 0x12, 0x2013, 64 * 1024, 8 }, -- { "m25p80", 0x13, 0x0000, 64 * 1024, 16 }, -- { "m25p16", 0x14, 0x2015, 64 * 1024, 32 }, -- { "m25p32", 0x15, 0x2016, 64 * 1024, 64 }, -- { "m25p64", 0x16, 0x2017, 64 * 1024, 128 }, -+ -+ /* Atmel -- some are (confusingly) marketed as "DataFlash" */ -+ { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, }, -+ { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, }, -+ -+ { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, }, -+ -+ { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, }, -+ { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, }, -+ { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, }, -+ { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, }, -+ -+ /* Spansion -- single (large) sector size only, at least -+ * for the chips listed here (without boot sectors). -+ */ -+ { "s25sl004a", 0x010212, 64 * 1024, 8, }, -+ { "s25sl008a", 0x010213, 64 * 1024, 16, }, -+ { "s25sl016a", 0x010214, 64 * 1024, 32, }, -+ { "s25sl032a", 0x010215, 64 * 1024, 64, }, -+ { "s25sl064a", 0x010216, 64 * 1024, 128, }, -+ -+ /* SST -- large erase sizes are "overlays", "sectors" are 4K */ -+ { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, }, -+ { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, }, -+ { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, }, -+ { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, }, -+ -+ /* ST Microelectronics -- newer production may have feature updates */ -+ { "m25p05", 0x202010, 32 * 1024, 2, }, -+ { "m25p10", 0x202011, 32 * 1024, 4, }, -+ { "m25p20", 0x202012, 64 * 1024, 4, }, -+ { "m25p40", 0x202013, 64 * 1024, 8, }, -+ { "m25p80", 0, 64 * 1024, 16, }, -+ { "m25p16", 0x202015, 64 * 1024, 32, }, -+ { "m25p32", 0x202016, 64 * 1024, 64, }, -+ { "m25p64", 0x202017, 64 * 1024, 128, }, -+ { "m25p128", 0x202018, 256 * 1024, 64, }, -+ -+ { "m45pe80", 0x204014, 64 * 1024, 16, }, -+ { "m45pe16", 0x204015, 64 * 1024, 32, }, -+ -+ { "m25pe80", 0x208014, 64 * 1024, 16, }, -+ { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, }, -+ -+ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ -+ { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, }, -+ { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, }, -+ { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, }, -+ { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, }, -+ { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, }, -+ { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, }, -+ { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, }, - }; - -+static struct flash_info *__devinit jedec_probe(struct spi_device *spi) -+{ -+ int tmp; -+ u8 code = OPCODE_RDID; -+ u8 id[3]; -+ u32 jedec; -+ struct flash_info *info; -+ -+ /* JEDEC also defines an optional "extended device information" -+ * string for after vendor-specific data, after the three bytes -+ * we use here. Supporting some chips might require using it. -+ */ -+ tmp = spi_write_then_read(spi, &code, 1, id, 3); -+ if (tmp < 0) { -+ DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n", -+ spi->dev.bus_id, tmp); -+ return NULL; -+ } -+ jedec = id[0]; -+ jedec = jedec << 8; -+ jedec |= id[1]; -+ jedec = jedec << 8; -+ jedec |= id[2]; -+ -+ for (tmp = 0, info = m25p_data; -+ tmp < ARRAY_SIZE(m25p_data); -+ tmp++, info++) { -+ if (info->jedec_id == jedec) -+ return info; -+ } -+ dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); -+ return NULL; -+} -+ -+ - /* - * board specific setup should have ensured the SPI clock used here - * matches what the READ command supports, at least until this driver -@@ -429,37 +531,51 @@ static int __devinit m25p_probe(struct s - unsigned i; - - /* Platform data helps sort out which chip type we have, as -- * well as how this board partitions it. -+ * well as how this board partitions it. If we don't have -+ * a chip ID, try the JEDEC id commands; they'll work for most -+ * newer chips, even if we don't recognize the particular chip. - */ - data = spi->dev.platform_data; -- if (!data || !data->type) { -- /* FIXME some chips can identify themselves with RES -- * or JEDEC get-id commands. Try them ... -- */ -- DEBUG(MTD_DEBUG_LEVEL1, "%s: no chip id\n", -- spi->dev.bus_id); -- return -ENODEV; -- } -+ if (data && data->type) { -+ for (i = 0, info = m25p_data; -+ i < ARRAY_SIZE(m25p_data); -+ i++, info++) { -+ if (strcmp(data->type, info->name) == 0) -+ break; -+ } - -- for (i = 0, info = m25p_data; i < ARRAY_SIZE(m25p_data); i++, info++) { -- if (strcmp(data->type, info->name) == 0) -- break; -- } -- if (i == ARRAY_SIZE(m25p_data)) { -- DEBUG(MTD_DEBUG_LEVEL1, "%s: unrecognized id %s\n", -- spi->dev.bus_id, data->type); -+ /* unrecognized chip? */ -+ if (i == ARRAY_SIZE(m25p_data)) { -+ DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n", -+ spi->dev.bus_id, data->type); -+ info = NULL; -+ -+ /* recognized; is that chip really what's there? */ -+ } else if (info->jedec_id) { -+ struct flash_info *chip = jedec_probe(spi); -+ -+ if (!chip || chip != info) { -+ dev_warn(&spi->dev, "found %s, expected %s\n", -+ chip ? chip->name : "UNKNOWN", -+ info->name); -+ info = NULL; -+ } -+ } -+ } else -+ info = jedec_probe(spi); -+ -+ if (!info) - return -ENODEV; -- } - - flash = kzalloc(sizeof *flash, GFP_KERNEL); - if (!flash) - return -ENOMEM; - - flash->spi = spi; -- init_MUTEX(&flash->lock); -+ mutex_init(&flash->lock); - dev_set_drvdata(&spi->dev, flash); - -- if (data->name) -+ if (data && data->name) - flash->mtd.name = data->name; - else - flash->mtd.name = spi->dev.bus_id; -@@ -468,17 +584,25 @@ static int __devinit m25p_probe(struct s - flash->mtd.writesize = 1; - flash->mtd.flags = MTD_CAP_NORFLASH; - flash->mtd.size = info->sector_size * info->n_sectors; -- flash->mtd.erasesize = info->sector_size; - flash->mtd.erase = m25p80_erase; - flash->mtd.read = m25p80_read; - flash->mtd.write = m25p80_write; - -+ /* prefer "small sector" erase if possible */ -+ if (info->flags & SECT_4K) { -+ flash->erase_opcode = OPCODE_BE_4K; -+ flash->mtd.erasesize = 4096; -+ } else { -+ flash->erase_opcode = OPCODE_SE; -+ flash->mtd.erasesize = info->sector_size; -+ } -+ - dev_info(&spi->dev, "%s (%d Kbytes)\n", info->name, - flash->mtd.size / 1024); - - DEBUG(MTD_DEBUG_LEVEL2, -- "mtd .name = %s, .size = 0x%.8x (%uM) " -- ".erasesize = 0x%.8x (%uK) .numeraseregions = %d\n", -+ "mtd .name = %s, .size = 0x%.8x (%uMiB) " -+ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", - flash->mtd.name, - flash->mtd.size, flash->mtd.size / (1024*1024), - flash->mtd.erasesize, flash->mtd.erasesize / 1024, -@@ -488,7 +612,7 @@ static int __devinit m25p_probe(struct s - for (i = 0; i < flash->mtd.numeraseregions; i++) - DEBUG(MTD_DEBUG_LEVEL2, - "mtd.eraseregions[%d] = { .offset = 0x%.8x, " -- ".erasesize = 0x%.8x (%uK), " -+ ".erasesize = 0x%.8x (%uKiB), " - ".numblocks = %d }\n", - i, flash->mtd.eraseregions[i].offset, - flash->mtd.eraseregions[i].erasesize, -@@ -516,14 +640,14 @@ static int __devinit m25p_probe(struct s - } - - if (nr_parts > 0) { -- for (i = 0; i < data->nr_parts; i++) { -+ for (i = 0; i < nr_parts; i++) { - DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " - "{.name = %s, .offset = 0x%.8x, " -- ".size = 0x%.8x (%uK) }\n", -- i, data->parts[i].name, -- data->parts[i].offset, -- data->parts[i].size, -- data->parts[i].size / 1024); -+ ".size = 0x%.8x (%uKiB) }\n", -+ i, parts[i].name, -+ parts[i].offset, -+ parts[i].size, -+ parts[i].size / 1024); - } - flash->partitioned = 1; - return add_mtd_partitions(&flash->mtd, parts, nr_parts); -@@ -560,6 +684,11 @@ static struct spi_driver m25p80_driver = - }, - .probe = m25p_probe, - .remove = __devexit_p(m25p_remove), -+ -+ /* REVISIT: many of these chips have deep power-down modes, which -+ * should clearly be entered on suspend() to minimize power use. -+ * And also when they're otherwise idle... -+ */ - }; - - -Index: linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/devices/mtd_dataflash.c -+++ linux-2.6.23.17/drivers/mtd/devices/mtd_dataflash.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -89,7 +90,7 @@ struct dataflash { - unsigned short page_offset; /* offset in flash address */ - unsigned int page_size; /* of bytes per page */ - -- struct semaphore lock; -+ struct mutex lock; - struct spi_device *spi; - - struct mtd_info mtd; -@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_in - x.len = 4; - spi_message_add_tail(&x, &msg); - -- down(&priv->lock); -+ mutex_lock(&priv->lock); - while (instr->len > 0) { - unsigned int pageaddr; - int status; -@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_in - instr->len -= priv->page_size; - } - } -- up(&priv->lock); -+ mutex_unlock(&priv->lock); - - /* Inform MTD subsystem that erase is complete */ - instr->state = MTD_ERASE_DONE; -@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_inf - x[1].len = len; - spi_message_add_tail(&x[1], &msg); - -- down(&priv->lock); -+ mutex_lock(&priv->lock); - - /* Continuous read, max clock = f(car) which may be less than - * the peak rate available. Some chips support commands with -@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_inf - /* plus 4 "don't care" bytes */ - - status = spi_sync(priv->spi, &msg); -- up(&priv->lock); -+ mutex_unlock(&priv->lock); - - if (status >= 0) { - *retlen = msg.actual_length - 8; -@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_in - else - writelen = len; - -- down(&priv->lock); -+ mutex_lock(&priv->lock); - while (remaining > 0) { - DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n", - pageaddr, offset, writelen); -@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_in - else - writelen = remaining; - } -- up(&priv->lock); -+ mutex_unlock(&priv->lock); - - return status; - } -@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, ch - if (!priv) - return -ENOMEM; - -- init_MUTEX(&priv->lock); -+ mutex_init(&priv->lock); - priv->spi = spi; - priv->page_size = pagesize; - priv->page_offset = pageoffset; -Index: linux-2.6.23.17/drivers/mtd/devices/pmc551.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/devices/pmc551.c -+++ linux-2.6.23.17/drivers/mtd/devices/pmc551.c -@@ -30,8 +30,8 @@ - * - * Notes: - * Due to what I assume is more buggy SROM, the 64M PMC551 I -- * have available claims that all 4 of it's DRAM banks have 64M -- * of ram configured (making a grand total of 256M onboard). -+ * have available claims that all 4 of its DRAM banks have 64MiB -+ * of ram configured (making a grand total of 256MiB onboard). - * This is slightly annoying since the BAR0 size reflects the - * aperture size, not the dram size, and the V370PDC supplies no - * other method for memory size discovery. This problem is -@@ -70,7 +70,7 @@ - * made the memory unusable, added a fix to code to touch up - * the DRAM some. - * -- * Bugs/FIXME's: -+ * Bugs/FIXMEs: - * * MUST fix the init function to not spin on a register - * waiting for it to set .. this does not safely handle busted - * devices that never reset the register correctly which will -@@ -562,10 +562,10 @@ static u32 fixup_pmc551(struct pci_dev * - /* - * Some screen fun - */ -- printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at " -+ printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at " - "0x%llx\n", (size < 1024) ? size : (size < 1048576) ? - size >> 10 : size >> 20, -- (size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size, -+ (size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size, - ((dcmd & (0x1 << 3)) == 0) ? "non-" : "", - (unsigned long long)pci_resource_start(dev, 0)); - -@@ -649,14 +649,10 @@ MODULE_DESCRIPTION(PMC551_VERSION); - * Stuff these outside the ifdef so as to not bust compiled in driver support - */ - static int msize = 0; --#if defined(CONFIG_MTD_PMC551_APERTURE_SIZE) --static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE; --#else - static int asize = 0; --#endif - - module_param(msize, int, 0); --MODULE_PARM_DESC(msize, "memory size in Megabytes [1 - 1024]"); -+MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]"); - module_param(asize, int, 0); - MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]"); - -@@ -799,8 +795,7 @@ static int __init init_pmc551(void) - mtd->owner = THIS_MODULE; - - if (add_mtd_device(mtd)) { -- printk(KERN_NOTICE "pmc551: Failed to register new " -- "device\n"); -+ printk(KERN_NOTICE "pmc551: Failed to register new device\n"); - pci_iounmap(PCI_Device, priv->start); - kfree(mtd->priv); - kfree(mtd); -@@ -811,13 +806,13 @@ static int __init init_pmc551(void) - pci_dev_get(PCI_Device); - - printk(KERN_NOTICE "Registered pmc551 memory device.\n"); -- printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n", -+ printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n", - priv->asize >> 20, - priv->start, priv->start + priv->asize); -- printk(KERN_NOTICE "Total memory is %d%c\n", -+ printk(KERN_NOTICE "Total memory is %d%sB\n", - (length < 1024) ? length : - (length < 1048576) ? length >> 10 : length >> 20, -- (length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M'); -+ (length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi"); - priv->nextpmc551 = pmc551list; - pmc551list = mtd; - found++; -@@ -850,7 +845,7 @@ static void __exit cleanup_pmc551(void) - pmc551list = priv->nextpmc551; - - if (priv->start) { -- printk(KERN_DEBUG "pmc551: unmapping %dM starting at " -+ printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at " - "0x%p\n", priv->asize >> 20, priv->start); - pci_iounmap(priv->dev, priv->start); - } -Index: linux-2.6.23.17/drivers/mtd/maps/nettel.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/maps/nettel.c -+++ linux-2.6.23.17/drivers/mtd/maps/nettel.c -@@ -158,68 +158,11 @@ static struct notifier_block nettel_noti - nettel_reboot_notifier, NULL, 0 - }; - --/* -- * Erase the configuration file system. -- * Used to support the software reset button. -- */ --static void nettel_erasecallback(struct erase_info *done) --{ -- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; -- wake_up(wait_q); --} -- --static struct erase_info nettel_erase; -- --int nettel_eraseconfig(void) --{ -- struct mtd_info *mtd; -- DECLARE_WAITQUEUE(wait, current); -- wait_queue_head_t wait_q; -- int ret; -- -- init_waitqueue_head(&wait_q); -- mtd = get_mtd_device(NULL, 2); -- if (!IS_ERR(mtd)) { -- nettel_erase.mtd = mtd; -- nettel_erase.callback = nettel_erasecallback; -- nettel_erase.callback = NULL; -- nettel_erase.addr = 0; -- nettel_erase.len = mtd->size; -- nettel_erase.priv = (u_long) &wait_q; -- nettel_erase.priv = 0; -- -- set_current_state(TASK_INTERRUPTIBLE); -- add_wait_queue(&wait_q, &wait); -- -- ret = mtd->erase(mtd, &nettel_erase); -- if (ret) { -- set_current_state(TASK_RUNNING); -- remove_wait_queue(&wait_q, &wait); -- put_mtd_device(mtd); -- return(ret); -- } -- -- schedule(); /* Wait for erase to finish. */ -- remove_wait_queue(&wait_q, &wait); -- -- put_mtd_device(mtd); -- } -- -- return(0); --} -- --#else -- --int nettel_eraseconfig(void) --{ -- return(0); --} -- - #endif - - /****************************************************************************/ - --int __init nettel_init(void) -+static int __init nettel_init(void) - { - volatile unsigned long *amdpar; - unsigned long amdaddr, maxsize; -@@ -421,10 +364,6 @@ int __init nettel_init(void) - - intel_mtd->owner = THIS_MODULE; - --#ifndef CONFIG_BLK_DEV_INITRD -- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 1); --#endif -- - num_intel_partitions = sizeof(nettel_intel_partitions) / - sizeof(nettel_intel_partitions[0]); - -@@ -477,7 +416,7 @@ out_unmap2: - - /****************************************************************************/ - --void __exit nettel_cleanup(void) -+static void __exit nettel_cleanup(void) - { - #ifdef CONFIG_MTD_CFI_INTELEXT - unregister_reboot_notifier(&nettel_notifier_block); -Index: linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/maps/pmcmsp-ramroot.c -+++ linux-2.6.23.17/drivers/mtd/maps/pmcmsp-ramroot.c -@@ -79,7 +79,6 @@ static int __init init_rrmap(void) - rr_mtd->owner = THIS_MODULE; - - add_mtd_device(rr_mtd); -- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, rr_mtd->index); - - return 0; - } -Index: linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/mtd_blkdevs.c -+++ linux-2.6.23.17/drivers/mtd/mtd_blkdevs.c -@@ -24,10 +24,9 @@ - #include - #include - --static LIST_HEAD(blktrans_majors); -+#include "mtdcore.h" - --extern struct mutex mtd_table_mutex; --extern struct mtd_info *mtd_table[]; -+static LIST_HEAD(blktrans_majors); - - struct mtd_blkcore_priv { - struct task_struct *thread; -@@ -202,7 +201,7 @@ static int blktrans_ioctl(struct inode * - } - } - --struct block_device_operations mtd_blktrans_ops = { -+static struct block_device_operations mtd_blktrans_ops = { - .owner = THIS_MODULE, - .open = blktrans_open, - .release = blktrans_release, -Index: linux-2.6.23.17/drivers/mtd/mtdchar.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/mtdchar.c -+++ linux-2.6.23.17/drivers/mtd/mtdchar.c -@@ -137,7 +137,8 @@ static int mtd_close(struct inode *inode - - DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n"); - -- if (mtd->sync) -+ /* Only sync if opened RW */ -+ if ((file->f_mode & 2) && mtd->sync) - mtd->sync(mtd); - - put_mtd_device(mtd); -Index: linux-2.6.23.17/drivers/mtd/mtdcore.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/mtdcore.c -+++ linux-2.6.23.17/drivers/mtd/mtdcore.c -@@ -22,6 +22,8 @@ - - #include - -+#include "mtdcore.h" -+ - /* These are exported solely for the purpose of mtd_blkdevs.c. You - should not use them for _anything_ else */ - DEFINE_MUTEX(mtd_table_mutex); -Index: linux-2.6.23.17/drivers/mtd/nand/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/nand/Kconfig -+++ linux-2.6.23.17/drivers/mtd/nand/Kconfig -@@ -134,10 +134,10 @@ config MTD_NAND_S3C2410_HWECC - - config MTD_NAND_NDFC - tristate "NDFC NanD Flash Controller" -- depends on 44x -+ depends on 4xx - select MTD_NAND_ECC_SMC - help -- NDFC Nand Flash Controllers are integrated in EP44x SoCs -+ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs - - config MTD_NAND_S3C2410_CLKSTOP - bool "S3C2410 NAND IDLE clock stop" -@@ -237,7 +237,7 @@ config MTD_NAND_CAFE - select REED_SOLOMON - select REED_SOLOMON_DEC16 - help -- Use NAND flash attached to the CAFÉ chip designed for the $100 -+ Use NAND flash attached to the CAFÉ chip designed for the OLPC - laptop. - - config MTD_NAND_CS553X -Index: linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/nand/cafe_nand.c -+++ linux-2.6.23.17/drivers/mtd/nand/cafe_nand.c -@@ -822,14 +822,53 @@ static struct pci_device_id cafe_nand_tb - - MODULE_DEVICE_TABLE(pci, cafe_nand_tbl); - -+static int cafe_nand_resume(struct pci_dev *pdev) -+{ -+ uint32_t timing1, timing2, timing3; -+ uint32_t ctrl; -+ struct mtd_info *mtd = pci_get_drvdata(pdev); -+ struct cafe_priv *cafe = mtd->priv; -+ -+ timing1 = timing2 = timing3 = 0xffffffff; -+ /* Start off by resetting the NAND controller completely */ -+ cafe_writel(cafe, 1, NAND_RESET); -+ cafe_writel(cafe, 0, NAND_RESET); -+ cafe_writel(cafe, timing1, NAND_TIMING1); -+ cafe_writel(cafe, timing2, NAND_TIMING2); -+ cafe_writel(cafe, timing3, NAND_TIMING3); -+ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK); -+ -+ /* Disable master reset, enable NAND clock */ -+ ctrl = cafe_readl(cafe, GLOBAL_CTRL); -+ ctrl &= 0xffffeff0; -+ ctrl |= 0x00007000; -+ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL); -+ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL); -+ cafe_writel(cafe, 0, NAND_DMA_CTRL); -+ cafe_writel(cafe, 0x7006, GLOBAL_CTRL); -+ cafe_writel(cafe, 0x700a, GLOBAL_CTRL); -+ -+ /* Set up DMA address */ -+ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0); -+ if (sizeof(cafe->dmaaddr) > 4) -+ /* Shift in two parts to shut the compiler up */ -+ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1); -+ else -+ cafe_writel(cafe, 0, NAND_DMA_ADDR1); -+ -+ /* Enable NAND IRQ in global IRQ mask register */ -+ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK); -+ return 0; -+} -+ - static struct pci_driver cafe_nand_pci_driver = { - .name = "CAFÉ NAND", - .id_table = cafe_nand_tbl, - .probe = cafe_nand_probe, - .remove = __devexit_p(cafe_nand_remove), -+ .resume = cafe_nand_resume, - #ifdef CONFIG_PMx - .suspend = cafe_nand_suspend, -- .resume = cafe_nand_resume, - #endif - }; - -Index: linux-2.6.23.17/drivers/mtd/nand/ndfc.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/nand/ndfc.c -+++ linux-2.6.23.17/drivers/mtd/nand/ndfc.c -@@ -24,7 +24,11 @@ - #include - - #include -+#ifdef CONFIG_40x -+#include -+#else - #include -+#endif - - struct ndfc_nand_mtd { - struct mtd_info mtd; -@@ -230,7 +234,11 @@ static int ndfc_nand_probe(struct platfo - struct ndfc_controller *ndfc = &ndfc_ctrl; - unsigned long long phys = settings->ndfc_erpn | res->start; - -+#ifndef CONFIG_PHYS_64BIT -+ ndfc->ndfcbase = ioremap((phys_addr_t)phys, res->end - res->start + 1); -+#else - ndfc->ndfcbase = ioremap64(phys, res->end - res->start + 1); -+#endif - if (!ndfc->ndfcbase) { - printk(KERN_ERR "NDFC: ioremap failed\n"); - return -EIO; -Index: linux-2.6.23.17/drivers/mtd/onenand/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/onenand/Kconfig -+++ linux-2.6.23.17/drivers/mtd/onenand/Kconfig -@@ -40,4 +40,27 @@ config MTD_ONENAND_OTP - - OTP block is fully-guaranteed to be a valid block. - -+config MTD_ONENAND_2X_PROGRAM -+ bool "OneNAND 2X program support" -+ help -+ The 2X Program is an extension of Program Operation. -+ Since the device is equipped with two DataRAMs, and two-plane NAND -+ Flash memory array, these two component enables simultaneous program -+ of 4KiB. Plane1 has only even blocks such as block0, block2, block4 -+ while Plane2 has only odd blocks such as block1, block3, block5. -+ So MTD regards it as 4KiB page size and 256KiB block size -+ -+ Now the following chips support it. (KFXXX16Q2M) -+ Demux: KFG2G16Q2M, KFH4G16Q2M, KFW8G16Q2M, -+ Mux: KFM2G16Q2M, KFN4G16Q2M, -+ -+ And more recent chips -+ -+config MTD_ONENAND_SIM -+ tristate "OneNAND simulator support" -+ depends on MTD_PARTITIONS -+ help -+ The simulator may simulate various OneNAND flash chips for the -+ OneNAND MTD layer. -+ - endif # MTD_ONENAND -Index: linux-2.6.23.17/drivers/mtd/onenand/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/onenand/Makefile -+++ linux-2.6.23.17/drivers/mtd/onenand/Makefile -@@ -8,4 +8,7 @@ obj-$(CONFIG_MTD_ONENAND) += onenand.o - # Board specific. - obj-$(CONFIG_MTD_ONENAND_GENERIC) += generic.o - -+# Simulator -+obj-$(CONFIG_MTD_ONENAND_SIM) += onenand_sim.o -+ - onenand-objs = onenand_base.o onenand_bbt.o -Index: linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/onenand/onenand_base.c -+++ linux-2.6.23.17/drivers/mtd/onenand/onenand_base.c -@@ -206,6 +206,15 @@ static int onenand_command(struct mtd_in - default: - block = (int) (addr >> this->erase_shift); - page = (int) (addr >> this->page_shift); -+ -+ if (ONENAND_IS_2PLANE(this)) { -+ /* Make the even block number */ -+ block &= ~1; -+ /* Is it the odd plane? */ -+ if (addr & this->writesize) -+ block++; -+ page >>= 1; -+ } - page &= this->page_mask; - break; - } -@@ -216,8 +225,12 @@ static int onenand_command(struct mtd_in - value = onenand_bufferram_address(this, block); - this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); - -- /* Switch to the next data buffer */ -- ONENAND_SET_NEXT_BUFFERRAM(this); -+ if (ONENAND_IS_2PLANE(this)) -+ /* It is always BufferRAM0 */ -+ ONENAND_SET_BUFFERRAM0(this); -+ else -+ /* Switch to the next data buffer */ -+ ONENAND_SET_NEXT_BUFFERRAM(this); - - return 0; - } -@@ -247,6 +260,8 @@ static int onenand_command(struct mtd_in - break; - - default: -+ if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG) -+ cmd = ONENAND_CMD_2X_PROG; - dataram = ONENAND_CURRENT_BUFFERRAM(this); - break; - } -@@ -445,8 +460,9 @@ static inline int onenand_bufferram_offs - struct onenand_chip *this = mtd->priv; - - if (ONENAND_CURRENT_BUFFERRAM(this)) { -+ /* Note: the 'this->writesize' is a real page size */ - if (area == ONENAND_DATARAM) -- return mtd->writesize; -+ return this->writesize; - if (area == ONENAND_SPARERAM) - return mtd->oobsize; - } -@@ -572,6 +588,30 @@ static int onenand_write_bufferram(struc - } - - /** -+ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode -+ * @param mtd MTD data structure -+ * @param addr address to check -+ * @return blockpage address -+ * -+ * Get blockpage address at 2x program mode -+ */ -+static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr) -+{ -+ struct onenand_chip *this = mtd->priv; -+ int blockpage, block, page; -+ -+ /* Calculate the even block number */ -+ block = (int) (addr >> this->erase_shift) & ~1; -+ /* Is it the odd plane? */ -+ if (addr & this->writesize) -+ block++; -+ page = (int) (addr >> (this->page_shift + 1)) & this->page_mask; -+ blockpage = (block << 7) | page; -+ -+ return blockpage; -+} -+ -+/** - * onenand_check_bufferram - [GENERIC] Check BufferRAM information - * @param mtd MTD data structure - * @param addr address to check -@@ -585,7 +625,10 @@ static int onenand_check_bufferram(struc - int blockpage, found = 0; - unsigned int i; - -- blockpage = (int) (addr >> this->page_shift); -+ if (ONENAND_IS_2PLANE(this)) -+ blockpage = onenand_get_2x_blockpage(mtd, addr); -+ else -+ blockpage = (int) (addr >> this->page_shift); - - /* Is there valid data? */ - i = ONENAND_CURRENT_BUFFERRAM(this); -@@ -625,7 +668,10 @@ static void onenand_update_bufferram(str - int blockpage; - unsigned int i; - -- blockpage = (int) (addr >> this->page_shift); -+ if (ONENAND_IS_2PLANE(this)) -+ blockpage = onenand_get_2x_blockpage(mtd, addr); -+ else -+ blockpage = (int) (addr >> this->page_shift); - - /* Invalidate another BufferRAM */ - i = ONENAND_NEXT_BUFFERRAM(this); -@@ -734,6 +780,7 @@ static int onenand_read(struct mtd_info - int read = 0, column; - int thislen; - int ret = 0, boundary = 0; -+ int writesize = this->writesize; - - DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); - -@@ -754,22 +801,22 @@ static int onenand_read(struct mtd_info - /* Do first load to bufferRAM */ - if (read < len) { - if (!onenand_check_bufferram(mtd, from)) { -- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize); -+ this->command(mtd, ONENAND_CMD_READ, from, writesize); - ret = this->wait(mtd, FL_READING); - onenand_update_bufferram(mtd, from, !ret); - } - } - -- thislen = min_t(int, mtd->writesize, len - read); -- column = from & (mtd->writesize - 1); -- if (column + thislen > mtd->writesize) -- thislen = mtd->writesize - column; -+ thislen = min_t(int, writesize, len - read); -+ column = from & (writesize - 1); -+ if (column + thislen > writesize) -+ thislen = writesize - column; - - while (!ret) { - /* If there is more to load then start next load */ - from += thislen; - if (read + thislen < len) { -- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize); -+ this->command(mtd, ONENAND_CMD_READ, from, writesize); - /* - * Chip boundary handling in DDP - * Now we issued chip 1 read and pointed chip 1 -@@ -794,7 +841,7 @@ static int onenand_read(struct mtd_info - this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2); - ONENAND_SET_NEXT_BUFFERRAM(this); - buf += thislen; -- thislen = min_t(int, mtd->writesize, len - read); -+ thislen = min_t(int, writesize, len - read); - column = 0; - cond_resched(); - /* Now wait for load */ -@@ -1079,7 +1126,7 @@ int onenand_bbt_read_oob(struct mtd_info - /* Read more? */ - if (read < len) { - /* Update Page size */ -- from += mtd->writesize; -+ from += this->writesize; - column = 0; - } - } -@@ -1135,12 +1182,12 @@ static int onenand_verify(struct mtd_inf - int thislen, column; - - while (len != 0) { -- thislen = min_t(int, mtd->writesize, len); -- column = addr & (mtd->writesize - 1); -- if (column + thislen > mtd->writesize) -- thislen = mtd->writesize - column; -+ thislen = min_t(int, this->writesize, len); -+ column = addr & (this->writesize - 1); -+ if (column + thislen > this->writesize) -+ thislen = this->writesize - column; - -- this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize); -+ this->command(mtd, ONENAND_CMD_READ, addr, this->writesize); - - onenand_update_bufferram(mtd, addr, 0); - -@@ -1236,6 +1283,10 @@ static int onenand_write(struct mtd_info - - /* In partial page write we don't update bufferram */ - onenand_update_bufferram(mtd, to, !ret && !subpage); -+ if (ONENAND_IS_2PLANE(this)) { -+ ONENAND_SET_BUFFERRAM1(this); -+ onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage); -+ } - - if (ret) { - printk(KERN_ERR "onenand_write: write filaed %d\n", ret); -@@ -1384,6 +1435,10 @@ static int onenand_do_write_oob(struct m - this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); - - onenand_update_bufferram(mtd, to, 0); -+ if (ONENAND_IS_2PLANE(this)) { -+ ONENAND_SET_BUFFERRAM1(this); -+ onenand_update_bufferram(mtd, to + this->writesize, 0); -+ } - - ret = this->wait(mtd, FL_WRITING); - if (ret) { -@@ -2107,6 +2162,7 @@ static int onenand_lock_user_prot_reg(st - * - * Check and set OneNAND features - * - lock scheme -+ * - two plane - */ - static void onenand_check_features(struct mtd_info *mtd) - { -@@ -2118,19 +2174,35 @@ static void onenand_check_features(struc - process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT; - - /* Lock scheme */ -- if (density >= ONENAND_DEVICE_DENSITY_1Gb) { -+ switch (density) { -+ case ONENAND_DEVICE_DENSITY_4Gb: -+ this->options |= ONENAND_HAS_2PLANE; -+ -+ case ONENAND_DEVICE_DENSITY_2Gb: -+ /* 2Gb DDP don't have 2 plane */ -+ if (!ONENAND_IS_DDP(this)) -+ this->options |= ONENAND_HAS_2PLANE; -+ this->options |= ONENAND_HAS_UNLOCK_ALL; -+ -+ case ONENAND_DEVICE_DENSITY_1Gb: - /* A-Die has all block unlock */ -- if (process) { -- printk(KERN_DEBUG "Chip support all block unlock\n"); -+ if (process) - this->options |= ONENAND_HAS_UNLOCK_ALL; -- } -- } else { -- /* Some OneNAND has continues lock scheme */ -- if (!process) { -- printk(KERN_DEBUG "Lock scheme is Continues Lock\n"); -+ break; -+ -+ default: -+ /* Some OneNAND has continuous lock scheme */ -+ if (!process) - this->options |= ONENAND_HAS_CONT_LOCK; -- } -+ break; - } -+ -+ if (this->options & ONENAND_HAS_CONT_LOCK) -+ printk(KERN_DEBUG "Lock scheme is Continuous Lock\n"); -+ if (this->options & ONENAND_HAS_UNLOCK_ALL) -+ printk(KERN_DEBUG "Chip support all block unlock\n"); -+ if (this->options & ONENAND_HAS_2PLANE) -+ printk(KERN_DEBUG "Chip has 2 plane\n"); - } - - /** -@@ -2257,6 +2329,8 @@ static int onenand_probe(struct mtd_info - this->erase_shift = ffs(mtd->erasesize) - 1; - this->page_shift = ffs(mtd->writesize) - 1; - this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1; -+ /* It's real page size */ -+ this->writesize = mtd->writesize; - - /* REVIST: Multichip handling */ - -@@ -2265,6 +2339,17 @@ static int onenand_probe(struct mtd_info - /* Check OneNAND features */ - onenand_check_features(mtd); - -+ /* -+ * We emulate the 4KiB page and 256KiB erase block size -+ * But oobsize is still 64 bytes. -+ * It is only valid if you turn on 2X program support, -+ * Otherwise it will be ignored by compiler. -+ */ -+ if (ONENAND_IS_2PLANE(this)) { -+ mtd->writesize <<= 1; -+ mtd->erasesize <<= 1; -+ } -+ - return 0; - } - -Index: linux-2.6.23.17/drivers/pci/quirks.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/pci/quirks.c -+++ linux-2.6.23.17/drivers/pci/quirks.c -@@ -1396,6 +1396,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN - DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); - - /* -+ * According to Tom Sylla, the Geode does not support PCI power management -+ * transition, so we shouldn't need the D3hot delay. -+ */ -+static void __init quirk_geode_pci_pm(struct pci_dev *dev) -+{ -+ pci_pm_d3_delay = 0; -+} -+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, quirk_geode_pci_pm); -+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_geode_pci_pm); -+ -+/* - * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size - * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. - * Re-allocate the region if needed... -Index: linux-2.6.23.17/drivers/video/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/Kconfig -+++ linux-2.6.23.17/drivers/video/Kconfig -@@ -594,7 +594,7 @@ config FB_TGA - - config FB_VESA - bool "VESA VGA graphics support" -- depends on (FB = y) && X86 -+ depends on (FB = y) && X86 && !VGA_NOPROBE - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT -@@ -1028,7 +1028,7 @@ config FB_CARILLO_RANCH - - config FB_INTEL - tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" -- depends on FB && EXPERIMENTAL && PCI && X86 -+ depends on FB && EXPERIMENTAL && PCI && X86 && !VGA_NOPROBE - select AGP - select AGP_INTEL - select FB_MODE_HELPERS -@@ -1383,7 +1383,7 @@ config FB_SAVAGE_ACCEL - - config FB_SIS - tristate "SiS/XGI display support" -- depends on FB && PCI -+ depends on FB && PCI && !VGA_NOPROBE - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT -@@ -1822,6 +1822,15 @@ config FB_PS3_DEFAULT_SIZE_M - The default value can be overridden on the kernel command line - using the "ps3fb" option (e.g. "ps3fb=9M"); - -+config FB_OLPC_DCON -+ tristate "One Laptop Per Child Display CONtroller support" -+ depends on OLPC -+ select I2C -+ ---help--- -+ Add support for the OLPC DCON controller. This controller is only -+ available on OLPC platforms. Unless you have one of these -+ platforms, you will want to say 'N'. -+ - config FB_XILINX - tristate "Xilinx frame buffer support" - depends on FB && XILINX_VIRTEX -Index: linux-2.6.23.17/drivers/video/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/Makefile -+++ linux-2.6.23.17/drivers/video/Makefile -@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx - obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o - obj-$(CONFIG_FB_PS3) += ps3fb.o - obj-$(CONFIG_FB_SM501) += sm501fb.o -+obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon.o - obj-$(CONFIG_FB_XILINX) += xilinxfb.o - obj-$(CONFIG_FB_OMAP) += omap/ - -Index: linux-2.6.23.17/drivers/video/fbmem.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/fbmem.c -+++ linux-2.6.23.17/drivers/video/fbmem.c -@@ -820,6 +820,53 @@ static void try_to_load(int fb) - #endif /* CONFIG_KMOD */ - - int -+fb_powerup(struct fb_info *info) -+{ -+ int ret = 0; -+ -+ if (!info || info->state == FBINFO_STATE_RUNNING) -+ return 0; -+ -+ if (info->fbops->fb_powerup) -+ ret = info->fbops->fb_powerup(info); -+ -+ if (!ret) { -+ acquire_console_sem(); -+ fb_set_suspend(info, 0); -+ release_console_sem(); -+ } -+ -+ return ret; -+} -+ -+int -+fb_powerdown(struct fb_info *info) -+{ -+ int ret = 0; -+ -+ if (!info || info->state == FBINFO_STATE_SUSPENDED) -+ return 0; -+ -+ /* Tell everybody that the fbdev is going down */ -+ acquire_console_sem(); -+ fb_set_suspend(info, 1); -+ release_console_sem(); -+ -+ if (info->fbops->fb_powerdown) -+ ret = info->fbops->fb_powerdown(info); -+ -+ /* If the power down failed, then un-notify */ -+ -+ if (ret) { -+ acquire_console_sem(); -+ fb_set_suspend(info, 0); -+ release_console_sem(); -+ } -+ -+ return ret; -+} -+ -+int - fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var) - { - struct fb_fix_screeninfo *fix = &info->fix; -Index: linux-2.6.23.17/drivers/video/geode/Makefile -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/geode/Makefile -+++ linux-2.6.23.17/drivers/video/geode/Makefile -@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o - obj-$(CONFIG_FB_GEODE_LX) += lxfb.o - - gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o --gxfb-objs := gxfb_core.o display_gx.o video_gx.o -+gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o - lxfb-objs := lxfb_core.o lxfb_ops.o -Index: linux-2.6.23.17/drivers/video/geode/display_gx.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/geode/display_gx.c -+++ linux-2.6.23.17/drivers/video/geode/display_gx.c -@@ -11,26 +11,44 @@ - * Free Software Foundation; either version 2 of the License, or * (at your - * option) any later version. - */ -+ -+#include - #include - #include - #include - #include - #include - #include -+#include - - #include "geodefb.h" - #include "display_gx.h" - --#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE --unsigned int gx_frame_buffer_size(void) -+static inline void rmwl(u32 val, u32 *reg) - { -- return CONFIG_FB_GEODE_GX_FBSIZE; -+ u32 in = readl(reg); -+ if (in != val) -+ writel(val, reg); - } --#else -+ - unsigned int gx_frame_buffer_size(void) - { - unsigned int val; - -+#ifdef CONFIG_OLPC -+ if (machine_is_olpc() && !olpc_has_vsa()) { -+ u32 hi,lo; -+ rdmsr(GLIU0_P2D_RO0, lo, hi); -+ -+ /* Top page number */ -+ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20); -+ -+ val -= (lo & 0x000fffff); /* Subtract bottom page number */ -+ val += 1; /* Adjust page count */ -+ return (val << 12); -+ } -+#endif -+ - /* FB size is reported by a virtual register */ - /* Virtual register class = 0x02 */ - /* VG_MEM_SIZE(512Kb units) = 0x00 */ -@@ -41,7 +59,6 @@ unsigned int gx_frame_buffer_size(void) - val = (unsigned int)(inw(0xAC1E)) & 0xFFl; - return (val << 19); - } --#endif - - int gx_line_delta(int xres, int bpp) - { -@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info * - gcfg = readl(par->dc_regs + DC_GENERAL_CFG); - dcfg = readl(par->dc_regs + DC_DISPLAY_CFG); - -- /* Disable the timing generator. */ -- dcfg &= ~(DC_DCFG_TGEN); -- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); -- -- /* Wait for pending memory requests before disabling the FIFO load. */ -- udelay(100); -- -- /* Disable FIFO load and compression. */ -- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); -- writel(gcfg, par->dc_regs + DC_GENERAL_CFG); -- -- /* Setup DCLK and its divisor. */ -- par->vid_ops->set_dclk(info); -- -- /* -- * Setup new mode. -- */ -+ /* Programming the clock is costly and ugly, so avoid if if we can */ -+ -+ if (par->curdclk != info->var.pixclock) { -+ /* Disable the timing generator. */ -+ dcfg &= ~(DC_DCFG_TGEN); -+ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); -+ -+ /* Wait for pending memory requests before disabling the FIFO load. */ -+ udelay(100); -+ -+ /* Disable FIFO load and compression. */ -+ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); -+ writel(gcfg, par->dc_regs + DC_GENERAL_CFG); -+ -+ /* Setup DCLK and its divisor. */ -+ par->vid_ops->set_dclk(info); -+ } - - /* Clear all unused feature bits. */ - gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE; -@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info * - gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE; - - /* Framebuffer start offset. */ -- writel(0, par->dc_regs + DC_FB_ST_OFFSET); -+ rmwl(0, par->dc_regs + DC_FB_ST_OFFSET); - - /* Line delta and line buffer length. */ -- writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH); -- writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, -- par->dc_regs + DC_LINE_SIZE); -+ rmwl(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH); -+ -+ rmwl(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, -+ par->dc_regs + DC_LINE_SIZE); - - - /* Enable graphics and video data and unmask address lines. */ -@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info * - vblankend = vsyncend + info->var.upper_margin; - vtotal = vblankend; - -- writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING); -- writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING); -- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING); -- -- writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING); -- writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING); -- writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING); -+ rmwl((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING); -+ rmwl((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING); -+ rmwl((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING); -+ rmwl((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING); -+ rmwl((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING); -+ rmwl((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING); - - /* Write final register values. */ -- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); -- writel(gcfg, par->dc_regs + DC_GENERAL_CFG); -+ rmwl(dcfg, par->dc_regs + DC_DISPLAY_CFG); -+ rmwl(gcfg, par->dc_regs + DC_GENERAL_CFG); - - par->vid_ops->configure_display(info); - -Index: linux-2.6.23.17/drivers/video/geode/display_gx.h -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/geode/display_gx.h -+++ linux-2.6.23.17/drivers/video/geode/display_gx.h -@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops; - #define GLD_MSR_CONFIG 0xC0002001 - #define GLD_MSR_CONFIG_DM_FP 0x40 - -+/* Used for memory dection on the OLPC */ -+#define GLIU0_P2D_RO0 0x10000029 -+ - /* Display controller registers */ - - #define DC_UNLOCK 0x00 -Index: linux-2.6.23.17/drivers/video/geode/geodefb.h -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/geode/geodefb.h -+++ linux-2.6.23.17/drivers/video/geode/geodefb.h -@@ -12,6 +12,10 @@ - #ifndef __GEODEFB_H__ - #define __GEODEFB_H__ - -+#define FB_POWER_STATE_OFF 0 -+#define FB_POWER_STATE_SUSPEND 1 -+#define FB_POWER_STATE_ON 2 -+ - struct geodefb_info; - - struct geode_dc_ops { -@@ -21,18 +25,24 @@ struct geode_dc_ops { - - struct geode_vid_ops { - void (*set_dclk)(struct fb_info *); -+ unsigned int (*get_dclk)(struct fb_info *); - void (*configure_display)(struct fb_info *); - int (*blank_display)(struct fb_info *, int blank_mode); - }; - - struct geodefb_par { - int enable_crt; -+ int fbactive; /* True if the current console is in KD_GRAPHICS mode */ - int panel_x; /* dimensions of an attached flat panel, non-zero => enable panel */ - int panel_y; -+ unsigned int curdclk; /* Used by GX to avoid unnessesary clock switching */ - void __iomem *dc_regs; - void __iomem *vid_regs; -+ void __iomem *gp_regs; - struct geode_dc_ops *dc_ops; - struct geode_vid_ops *vid_ops; -+ -+ int state; - }; - - #endif /* !__GEODEFB_H__ */ -Index: linux-2.6.23.17/drivers/video/geode/gxfb_core.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/geode/gxfb_core.c -+++ linux-2.6.23.17/drivers/video/geode/gxfb_core.c -@@ -30,12 +30,31 @@ - #include - #include - #include -+#include -+#include -+#include -+#include -+#include - - #include "geodefb.h" - #include "display_gx.h" - #include "video_gx.h" - -+#define FBIOSGAMMA _IOW('F', 0x20, void *) -+#define FBIOGGAMMA _IOW('F', 0x21, void *) -+ -+#ifdef DEBUG -+ -+#define FBIODUMPGP _IOW('F', 0x22, void *) -+#define FBIODUMPDC _IOW('F', 0x23, void *) -+#define FBIODUMPVP _IOW('F', 0x24, void *) -+#define FBIODUMPFP _IOW('F', 0x25, void *) -+ -+#endif -+ - static char *mode_option; -+static int noclear; -+struct fb_info *gxfb_info; - - /* Modes relevant to the GX (taken from modedb.c) */ - static const struct fb_videomode gx_modedb[] __initdata = { -@@ -103,8 +122,20 @@ static const struct fb_videomode gx_mode - { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3, - FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1200x900-75 - CRT timings for the OLPC mode */ -+ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3, -+ 0, FB_VMODE_NONINTERLACED, 0 } - }; - -+#ifdef CONFIG_OLPC -+static const struct fb_videomode gx_dcon_modedb[] __initdata = { -+ /* The only mode the DCON has is 1200x900 */ -+ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, -+ 0, FB_VMODE_NONINTERLACED, 0 } -+}; -+#endif -+ -+ - static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) - { - if (var->xres > 1600 || var->yres > 1200) -@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_ - return 0; - } - --static int gxfb_set_par(struct fb_info *info) -+int gxfb_set_par(struct fb_info *info) - { - struct geodefb_par *par = info->par; - -@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, st - return par->vid_ops->blank_display(info, blank_mode); - } - -+static int fbsize; -+ - static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev) - { - struct geodefb_par *par = info->par; -- int fb_len; - int ret; - - ret = pci_enable_device(dev); - if (ret < 0) - return ret; - -+ ret = pci_request_region(dev, 1, "gxfb (graphics processor)"); -+ if (ret < 0) -+ return ret; -+ -+ par->gp_regs = ioremap(pci_resource_start(dev, 1), -+ pci_resource_len(dev, 1)); -+ if (!par->gp_regs) -+ return -ENOMEM; -+ - ret = pci_request_region(dev, 3, "gxfb (video processor)"); - if (ret < 0) - return ret; -@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory( - ret = pci_request_region(dev, 0, "gxfb (framebuffer)"); - if (ret < 0) - return ret; -- if ((fb_len = gx_frame_buffer_size()) < 0) -- return -ENOMEM; -+ -+ /* If the fbsize wasn't specified then try to probe it */ -+ -+ if (!fbsize) { -+ fbsize = gx_frame_buffer_size(); -+ if (fbsize == 0) -+ return -ENOMEM; -+ } -+ - info->fix.smem_start = pci_resource_start(dev, 0); -- info->fix.smem_len = fb_len; -+ info->fix.smem_len = fbsize; - info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); - if (!info->screen_base) - return -ENOMEM; - -- /* Set the 16MB aligned base address of the graphics memory region -+ /* Set the 16MiB aligned base address of the graphics memory region - * in the display controller */ - - writel(info->fix.smem_start & 0xFF000000, - par->dc_regs + DC_GLIU0_MEM_OFFSET); - -- dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n", -+ dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n", - info->fix.smem_len / 1024, info->fix.smem_start); - - return 0; - } - -+static int gxfb_ioctl( struct fb_info *info, unsigned int cmd, -+ unsigned long arg) -+{ -+ unsigned int gamma[GXFB_GAMMA_DWORDS]; -+ int ret = -EINVAL; -+ struct geodefb_par *par = info->par; -+ int i; -+ -+ switch(cmd) { -+ case FBIOSGAMMA: -+ /* Read the gamma information from the user - 256 dwords */ -+ -+ if (copy_from_user(gamma, (void * __user) arg, GXFB_GAMMA_SIZE)) -+ return -EFAULT; -+ -+ writel(0, par->vid_regs + GX_GAR); -+ -+ /* Sequential writes to the data register will increment the -+ address automatically */ -+ -+ for(i = 0; i < GXFB_GAMMA_DWORDS; i++) -+ writel(gamma[i] & 0xFFFFFF, par->vid_regs + GX_GDR); -+ -+ writel(readl(par->vid_regs + GX_MISC) & ~GX_MISC_GAM_EN, -+ par->vid_regs + GX_MISC); -+ -+ ret = 0; -+ break; -+ -+ case FBIOGGAMMA: -+ if (readl(par->vid_regs + GX_MISC) & GX_MISC_GAM_EN) -+ return -EINVAL; -+ -+ memset(gamma, 0, GXFB_GAMMA_SIZE); -+ writel(0, par->vid_regs + GX_GAR); -+ -+ for(i = 0; i < GXFB_GAMMA_DWORDS;i++) -+ gamma[i] = readl(par->vid_regs + GX_GDR); -+ -+ if (copy_to_user((void * __user) arg, gamma, GXFB_GAMMA_SIZE)) -+ ret = -EFAULT; -+ else -+ ret = 0; -+ -+ break; -+ -+#ifdef DEBUG -+ case FBIODUMPGP: -+ ret = 0; -+ dump_regs(info, 0); -+ break; -+ -+ case FBIODUMPDC: -+ ret = 0; -+ dump_regs(info, 1); -+ break; -+ -+ case FBIODUMPVP: -+ ret = 0; -+ dump_regs(info, 2); -+ break; -+ -+ case FBIODUMPFP: -+ ret = 0; -+ dump_regs(info, 3); -+ break; -+#endif -+ } -+ -+ return ret; -+} -+ - static struct fb_ops gxfb_ops = { - .owner = THIS_MODULE, - .fb_check_var = gxfb_check_var, - .fb_set_par = gxfb_set_par, - .fb_setcolreg = gxfb_setcolreg, - .fb_blank = gxfb_blank, -+ .fb_ioctl = gxfb_ioctl, - /* No HW acceleration for now. */ - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, -+ .fb_powerdown = gxfb_powerdown, -+ .fb_powerup = gxfb_powerup, - }; - - static struct fb_info * __init gxfb_init_fbinfo(struct device *dev) -@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init - return info; - } - --static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id) -+static int gxfb_console_notify(struct notifier_block *self, -+ unsigned long action, void *data) -+{ -+ if (gxfb_info != NULL) { -+ struct geodefb_par *par = gxfb_info->par; -+ par->fbactive = (action == CONSOLE_EVENT_SWITCH_TEXT) ? 0 : 1; -+ } -+ -+ return NOTIFY_OK; -+} -+ -+static struct notifier_block gxfb_console_notifier = { -+ .notifier_call = gxfb_console_notify -+}; -+ -+#ifdef CONFIG_PM -+ -+static int gxfb_suspend(struct pci_dev *pdev, pm_message_t state) -+{ -+ struct fb_info *info = pci_get_drvdata(pdev); -+ struct geodefb_par *par = info->par; -+ -+ if (pdev->dev.power.power_state.event == state.event) -+ return 0; -+ -+ if (state.event == PM_EVENT_SUSPEND) { -+ -+ acquire_console_sem(); -+ gxfb_powerdown(info); -+ -+ par->state = FB_POWER_STATE_OFF; -+ fb_set_suspend(info, 1); -+ -+ release_console_sem(); -+ } -+ -+ pdev->dev.power.power_state = state; -+ return 0; -+} -+ -+static int gxfb_resume(struct pci_dev *pdev) -+{ -+ struct fb_info *info = pci_get_drvdata(pdev); -+ -+ acquire_console_sem(); -+ -+ /* Turn the engine completely on */ -+ -+ if (gxfb_powerup(info)) -+ printk(KERN_ERR "gxfb: Powerup failed\n"); -+ -+ fb_set_suspend(info, 0); -+ release_console_sem(); -+ -+ pdev->dev.power.power_state = PMSG_ON; -+ return 0; -+} -+#endif -+ -+static int __init gxfb_probe(struct pci_dev *pdev, -+ const struct pci_device_id *id) - { - struct geodefb_par *par; -- struct fb_info *info; - int ret; - unsigned long val; - -- info = gxfb_init_fbinfo(&pdev->dev); -- if (!info) -+ struct fb_videomode *modedb_ptr; -+ int modedb_size; -+ -+ gxfb_info = gxfb_init_fbinfo(&pdev->dev); -+ if (gxfb_info == NULL) - return -ENOMEM; -- par = info->par; -+ -+ par = gxfb_info->par; - - /* GX display controller and GX video device. */ - par->dc_ops = &gx_dc_ops; - par->vid_ops = &gx_vid_ops; - -- if ((ret = gxfb_map_video_memory(info, pdev)) < 0) { -+ if ((ret = gxfb_map_video_memory(gxfb_info, pdev)) < 0) { - dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n"); - goto err; - } -@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_ - else - par->enable_crt = 1; - -- ret = fb_find_mode(&info->var, info, mode_option, -- gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16); -+ /* Get the current dotclock */ -+ -+ par->curdclk = (par->vid_ops->get_dclk) ? par->vid_ops->get_dclk(gxfb_info) : 0; -+ -+ /* We need to determine a display mode right now, so we will -+ * check to see if the DCON was previously detected by the BIOS -+ * and use that to make our mode database decision. -+ */ -+ -+ modedb_ptr = (struct fb_videomode *) gx_modedb; -+ modedb_size = ARRAY_SIZE(gx_modedb); -+ -+#ifdef CONFIG_OLPC -+ if (olpc_has_dcon()) { -+ modedb_ptr = (struct fb_videomode *) gx_dcon_modedb; -+ modedb_size = ARRAY_SIZE(gx_dcon_modedb); -+ } -+#endif -+ -+ ret = fb_find_mode(&gxfb_info->var, gxfb_info, mode_option, -+ modedb_ptr, modedb_size, NULL, 16); -+ - if (ret == 0 || ret == 4) { - dev_err(&pdev->dev, "could not find valid video mode\n"); - ret = -EINVAL; - goto err; - } - -+ /* Clear the screen of garbage, unless noclear was specified, -+ * in which case we assume the user knows what he is doing */ -+ -+ if (!noclear) -+ memset_io(gxfb_info->screen_base, 0, gxfb_info->fix.smem_len); -+ -+ gxfb_check_var(&gxfb_info->var, gxfb_info); -+ gxfb_set_par(gxfb_info); -+ -+ /* We are powered up */ -+ par->state = FB_POWER_STATE_ON; - -- /* Clear the frame buffer of garbage. */ -- memset_io(info->screen_base, 0, info->fix.smem_len); - -- gxfb_check_var(&info->var, info); -- gxfb_set_par(info); -+ console_event_register(&gxfb_console_notifier); - -- if (register_framebuffer(info) < 0) { -+ if (register_framebuffer(gxfb_info) < 0) { - ret = -EINVAL; - goto err; - } -- pci_set_drvdata(pdev, info); -- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id); -+ pci_set_drvdata(pdev, gxfb_info); -+ printk(KERN_INFO "fb%d: %s frame buffer device\n", gxfb_info->node, gxfb_info->fix.id); - return 0; - - err: -- if (info->screen_base) { -- iounmap(info->screen_base); -+ if (gxfb_info->screen_base) { -+ iounmap(gxfb_info->screen_base); - pci_release_region(pdev, 0); - } - if (par->vid_regs) { -@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_ - pci_release_region(pdev, 2); - } - -- if (info) -- framebuffer_release(info); -+ if (gxfb_info) -+ framebuffer_release(gxfb_info); -+ - return ret; - } - -@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev * - } - - static struct pci_device_id gxfb_id_table[] = { -- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO, -- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, -- 0xff0000, 0 }, -+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) }, - { 0, } - }; - -@@ -410,22 +623,30 @@ static struct pci_driver gxfb_driver = { - .id_table = gxfb_id_table, - .probe = gxfb_probe, - .remove = gxfb_remove, -+#ifdef CONFIG_PM -+ .suspend = gxfb_suspend, -+ .resume = gxfb_resume -+#endif - }; - - #ifndef MODULE --static int __init gxfb_setup(char *options) --{ -+static int __init gxfb_setup(char *options) { - - char *opt; - - if (!options || !*options) - return 0; - -- while ((opt = strsep(&options, ",")) != NULL) { -+ while((opt = strsep(&options, ",")) != NULL) { - if (!*opt) - continue; - -- mode_option = opt; -+ if (!strncmp(opt, "fbsize:", 7)) -+ fbsize = simple_strtoul(opt+7, NULL, 0); -+ else if (!strcmp(opt, "noclear")) -+ noclear = 1; -+ else -+ mode_option = opt; - } - - return 0; -@@ -444,7 +665,6 @@ static int __init gxfb_init(void) - #endif - return pci_register_driver(&gxfb_driver); - } -- - static void __exit gxfb_cleanup(void) - { - pci_unregister_driver(&gxfb_driver); -@@ -456,5 +676,8 @@ module_exit(gxfb_cleanup); - module_param(mode_option, charp, 0); - MODULE_PARM_DESC(mode_option, "video mode (x[-][@])"); - -+module_param(fbsize, int, 0); -+MODULE_PARM_DESC(fbsize, "video memory size"); -+ - MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX"); - MODULE_LICENSE("GPL"); -Index: linux-2.6.23.17/drivers/video/geode/lxfb.h -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/geode/lxfb.h -+++ linux-2.6.23.17/drivers/video/geode/lxfb.h -@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *); - void lx_get_gamma(struct fb_info *, unsigned int *, int); - void lx_set_gamma(struct fb_info *, unsigned int *, int); - unsigned int lx_framebuffer_size(void); -+int lx_shutdown(struct fb_info *); -+int lx_powerup(struct fb_info *); - int lx_blank_display(struct fb_info *, int); - void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int, - unsigned int, unsigned int); - -+ -+ -+/* ioctl() defines */ -+ -+#define FBIOSGAMMA _IOW('F', 0x20, void *) -+#define FBIOGGAMMA _IOW('F', 0x21, void *) -+ -+/* General definitions */ -+#define LXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */ -+#define LXFB_GAMMA_SIZE (LXFB_GAMMA_DWORDS * sizeof(unsigned int)) -+ - /* MSRS */ - - #define MSR_LX_GLD_CONFIG 0x48002001 -Index: linux-2.6.23.17/drivers/video/geode/lxfb_core.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/geode/lxfb_core.c -+++ linux-2.6.23.17/drivers/video/geode/lxfb_core.c -@@ -22,6 +22,7 @@ - #include - #include - #include -+#include - - #include "lxfb.h" - -@@ -35,186 +36,84 @@ static int fbsize; - */ - - const struct fb_videomode geode_modedb[] __initdata = { -- /* 640x480-60 */ -- { NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2, -+ /* 640x480-60 VESA */ -+ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2, -+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 640x480-75 VESA */ -+ { NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3, -+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 640x480-85 VESA */ -+ { NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3, -+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 800x600-60 VESA */ -+ { NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4, -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 800x600-75 VESA */ -+ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3, -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 800x600-85 VESA */ -+ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3, -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1024x768-60 VESA */ -+ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6, -+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1024x768-75 VESA */ -+ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3, -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1024x768-85 VESA */ -+ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3, -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1280x960-60 VESA */ -+ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3, -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1280x960-85 VESA */ -+ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3, -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1280x1024-60 VESA */ -+ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3, -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1280x1024-75 VESA */ -+ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3, -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1280x1024-85 VESA */ -+ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3, - FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 640x400-70 */ -- { NULL, 70, 640, 400, 39770, 40, 8, 28, 5, 96, 2, -- FB_SYNC_HOR_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 640x480-70 */ -- { NULL, 70, 640, 480, 35014, 88, 24, 15, 2, 64, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 640x480-72 */ -- { NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3, -- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 640x480-75 */ -- { NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3, -- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 640x480-85 */ -- { NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3, -- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 640x480-90 */ -- { NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 640x480-100 */ -- { NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 640x480-60 */ -- { NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2, -- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 800x600-56 */ -- { NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 800x600-60 */ -- { NULL, 60, 800, 600, 25131, 72, 32, 23, 1, 136, 4, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 800x600-70 */ -- { NULL, 70, 800, 600, 21873, 120, 40, 21, 4, 80, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 800x600-72 */ -- { NULL, 72, 800, 600, 20052, 64, 56, 23, 37, 120, 6, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 800x600-75 */ -- { NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 800x600-85 */ -- { NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 800x600-90 */ -- { NULL, 90, 800, 600, 16648, 128, 40, 28, 1, 88, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 800x600-100 */ -- { NULL, 100, 800, 600, 14667, 136, 48, 27, 1, 88, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 800x600-60 */ -- { NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4, -- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 1024x768-60 */ -- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6, -- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 1024x768-70 */ -- { NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6, -- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 1024x768-72 */ -- { NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1024x768-75 */ -- { NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1024x768-85 */ -- { NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1024x768-90 */ -- { NULL, 90, 1024, 768, 9981, 176, 64, 37, 1, 112, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1024x768-100 */ -- { NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1024x768-60 */ -- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6, -- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 1152x864-60 */ -- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1152x864-70 */ -- { NULL, 70, 1152, 864, 10254, 192, 72, 32, 8, 120, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1152x864-72 */ -- { NULL, 72, 1152, 864, 9866, 200, 72, 33, 7, 128, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1152x864-75 */ -- { NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1152x864-85 */ -- { NULL, 85, 1152, 864, 8357, 200, 72, 37, 3, 128, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1152x864-90 */ -- { NULL, 90, 1152, 864, 7719, 208, 80, 42, 9, 128, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1152x864-100 */ -- { NULL, 100, 1152, 864, 6947, 208, 80, 48, 3, 128, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1152x864-60 */ -- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3, -- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 1280x1024-60 */ -- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1280x1024-70 */ -- { NULL, 70, 1280, 1024, 7719, 224, 88, 38, 6, 136, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1280x1024-72 */ -- { NULL, 72, 1280, 1024, 7490, 224, 88, 39, 7, 136, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1280x1024-75 */ -- { NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1280x1024-85 */ -- { NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1280x1024-90 */ -- { NULL, 90, 1280, 1024, 5791, 240, 96, 51, 12, 144, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1280x1024-100 */ -- { NULL, 100, 1280, 1024, 5212, 240, 96, 57, 6, 144, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1280x1024-60 */ -- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3, -- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 1600x1200-60 */ -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1600x1200-60 VESA */ - { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1600x1200-70 */ -- { NULL, 70, 1600, 1200, 5291, 304, 64, 46, 1, 192, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1600x1200-72 */ -- { NULL, 72, 1600, 1200, 5053, 288, 112, 47, 13, 176, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1600x1200-75 */ -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1600x1200-75 VESA */ - { NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1600x1200-85 */ -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1600x1200-85 VESA */ - { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1600x1200-90 */ -- { NULL, 90, 1600, 1200, 3981, 304, 128, 60, 1, 176, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1600x1200-100 */ -- { NULL, 100, 1600, 1200, 3563, 304, 128, 67, 1, 176, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1600x1200-60 */ -- { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3, - FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -- FB_VMODE_NONINTERLACED, 0 }, -- /* 1920x1440-60 */ -- { NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1920x1440-70 */ -- { NULL, 70, 1920, 1440, 3593, 360, 152, 55, 8, 208, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1920x1440-72 */ -- { NULL, 72, 1920, 1440, 3472, 360, 152, 68, 4, 208, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1920x1440-75 */ -- { NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -- /* 1920x1440-85 */ -- { NULL, 85, 1920, 1440, 2929, 368, 152, 68, 1, 216, 3, -- 0, FB_VMODE_NONINTERLACED, 0 }, -+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, -+ /* 1200x900-75 - CRT timings for the OLPC mode */ -+ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3, -+ 0, FB_VMODE_NONINTERLACED, 0 } - }; - -+#ifdef CONFIG_OLPC -+const struct fb_videomode olpc_dcon_modedb[] __initdata = { -+ /* The only mode the DCON has is 1200x900 */ -+ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, -+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, -+ FB_VMODE_NONINTERLACED, 0 } -+}; -+#endif -+ - static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) - { - if (var->xres > 1920 || var->yres > 1440) -@@ -379,16 +278,55 @@ static int __init lxfb_map_video_memory( - return 0; - } - -+static int lxfb_set_gamma(struct fb_info *info, void * __user data) -+{ -+ unsigned int gamma[LXFB_GAMMA_DWORDS]; -+ -+ if (copy_from_user(gamma, data, LXFB_GAMMA_SIZE)) -+ return -EFAULT; -+ -+ lx_set_gamma(info, gamma, LXFB_GAMMA_SIZE); -+ return 0; -+} -+ -+static int lxfb_get_gamma(struct fb_info *info, void * __user data) -+{ -+ unsigned int gamma[LXFB_GAMMA_DWORDS]; -+ memset(gamma, 0, sizeof(gamma)); -+ -+ lx_get_gamma(info, gamma, LXFB_GAMMA_DWORDS); -+ -+ return copy_to_user(data, gamma, LXFB_GAMMA_SIZE) ? -+ -EFAULT : 0; -+} -+ -+static int lxfb_ioctl( struct fb_info *info, unsigned int cmd, -+ unsigned long arg) -+{ -+ switch(cmd) { -+ case FBIOSGAMMA: -+ return lxfb_set_gamma(info, (void * __user) arg); -+ -+ case FBIOGGAMMA: -+ return lxfb_get_gamma(info, (void * __user) arg); -+ } -+ -+ return -ENOTTY; -+} -+ - static struct fb_ops lxfb_ops = { - .owner = THIS_MODULE, - .fb_check_var = lxfb_check_var, - .fb_set_par = lxfb_set_par, - .fb_setcolreg = lxfb_setcolreg, - .fb_blank = lxfb_blank, -+ .fb_ioctl = lxfb_ioctl, - /* No HW acceleration for now. */ - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, -+ .fb_powerdown = lx_shutdown, -+ .fb_powerup = lx_powerup, - }; - - static struct fb_info * __init lxfb_init_fbinfo(struct device *dev) -@@ -431,6 +369,45 @@ static struct fb_info * __init lxfb_init - return info; - } - -+#ifdef CONFIG_PM -+ -+static int lxfb_suspend(struct pci_dev *pdev, pm_message_t state) -+{ -+ struct fb_info *info = pci_get_drvdata(pdev); -+ -+ if (pdev->dev.power.power_state.event == state.event) -+ return 0; -+ -+ if (state.event == PM_EVENT_SUSPEND) { -+ -+ acquire_console_sem(); -+ lx_shutdown(info); -+ fb_set_suspend(info, 1); -+ release_console_sem(); -+ } -+ -+ pdev->dev.power.power_state = state; -+ return 0; -+} -+ -+static int lxfb_resume(struct pci_dev *pdev) -+{ -+ struct fb_info *info = pci_get_drvdata(pdev); -+ -+ acquire_console_sem(); -+ -+ /* Turn the engine completely on */ -+ -+ lx_powerup(info); -+ fb_set_suspend(info, 0); -+ release_console_sem(); -+ -+ pdev->dev.power.power_state = PMSG_ON; -+ return 0; -+} -+ -+#endif -+ - static int __init lxfb_probe(struct pci_dev *pdev, - const struct pci_device_id *id) - { -@@ -467,6 +444,13 @@ static int __init lxfb_probe(struct pci_ - modedb_ptr = (struct fb_videomode *) geode_modedb; - modedb_size = ARRAY_SIZE(geode_modedb); - -+#ifdef CONFIG_OLPC -+ if (olpc_has_dcon()) { -+ modedb_ptr = (struct fb_videomode *) olpc_dcon_modedb; -+ modedb_size = ARRAY_SIZE(olpc_dcon_modedb); -+ } -+#endif -+ - ret = fb_find_mode(&info->var, info, mode_option, - modedb_ptr, modedb_size, NULL, 16); - -@@ -556,6 +540,10 @@ static struct pci_driver lxfb_driver = { - .id_table = lxfb_id_table, - .probe = lxfb_probe, - .remove = lxfb_remove, -+#ifdef CONFIG_PM -+ .suspend = lxfb_suspend, -+ .resume = lxfb_resume -+#endif - }; - - #ifndef MODULE -Index: linux-2.6.23.17/drivers/video/geode/lxfb_ops.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/geode/lxfb_ops.c -+++ linux-2.6.23.17/drivers/video/geode/lxfb_ops.c -@@ -13,9 +13,13 @@ - #include - #include - #include -+#include - - #include "lxfb.h" - -+#define _GEODELX_ -+#include "geode_regs.h" -+ - /* TODO - * Support panel scaling - * Add acceleration -@@ -290,6 +294,19 @@ unsigned int lx_framebuffer_size(void) - { - unsigned int val; - -+#ifdef CONFIG_OLPC -+ if (machine_is_olpc() && !olpc_has_vsa()) { -+ u32 hi,lo; -+ rdmsr(MSR_LX_GLIU0_P2D_RO0, lo, hi); -+ -+ /* Top page number */ -+ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20); -+ val -= (lo & 0x000fffff); /* Subtract bottom page number */ -+ val += 1; /* Adjust page count */ -+ return (val << 12); -+ } -+#endif -+ - /* The frame buffer size is reported by a VSM in VSA II */ - /* Virtual Register Class = 0x02 */ - /* VG_MEM_SIZE (1MB units) = 0x00 */ -@@ -301,6 +318,34 @@ unsigned int lx_framebuffer_size(void) - return (val << 20); - } - -+void lx_set_gamma(struct fb_info *info, unsigned int *gamma, int len) -+{ -+ int i; -+ struct lxfb_par *par = info->par; -+ -+ writel(0, par->df_regs + DF_PAR); -+ -+ /* Sequential writes to the data register will increment the -+ address automatically */ -+ -+ for(i = 0; i < len; i++) -+ writel(gamma[i] & 0xFFFFFF, par->df_regs + DF_PDR); -+ -+ writel(readl(par->df_regs + DF_MISC) & ~DF_MISC_GAM_BYPASS, -+ par->df_regs + DF_MISC); -+} -+ -+void lx_get_gamma(struct fb_info *info, unsigned int *gamma, int len) -+{ -+ int i; -+ struct lxfb_par *par = info->par; -+ -+ writel(0, par->df_regs + DF_PAR); -+ -+ for(i = 0; i < len;i++) -+ gamma[i] = readl(par->df_regs + DF_PDR); -+} -+ - void lx_set_mode(struct fb_info *info) - { - struct lxfb_par *par = info->par; -@@ -313,6 +358,7 @@ void lx_set_mode(struct fb_info *info) - int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal; - - /* Unlock the DC registers */ -+ readl(par->dc_regs + DC_UNLOCK); - writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); - - lx_graphics_disable(info); -@@ -534,3 +580,285 @@ int lx_blank_display(struct fb_info *inf - - return 0; - } -+ -+static struct geoderegs saved_regs; -+ -+static void lx_save_regs(struct fb_info *info, struct geoderegs *regs) -+{ -+ struct lxfb_par *par = info->par; -+ int i; -+ -+ /* Wait for the command buffer to empty */ -+ while(!(readl(par->gp_regs + 0x44) & (1 << 4))); -+ -+ rdmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel); -+ rdmsrl(MSR_LX_GLCP_DOTPLL, regs->msr.dotpll); -+ rdmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg); -+ rdmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare); -+ -+ writel(0x4758, par->dc_regs + 0x00); -+ -+ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE); -+ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE); -+ memcpy(regs->vp.b, par->df_regs, VP_REG_SIZE); -+ memcpy(regs->fp.b, par->df_regs + VP_FP_START, FP_REG_SIZE); -+ -+ /* Save the palettes */ -+ writel(0, par->dc_regs + 0x70); -+ -+ for(i = 0; i < DC_PAL_SIZE; i++) -+ regs->pal[i] = readl(par->dc_regs + 0x74); -+ -+ writel(0, par->df_regs + 0x38); -+ -+ for(i = 0; i <= 0xFF; i++) -+ regs->gamma[i] = readl(par->df_regs + 0x40); -+} -+ -+static void lx_restore_regs(struct fb_info *info, struct geoderegs *regs) -+{ -+ struct lxfb_par *par = info->par; -+ u32 val, i; -+ -+ /* == DOTPLL == */ -+ -+ lx_set_dotpll((u32) (regs->msr.dotpll >> 32)); -+ -+ /* MSRs */ -+ -+ wrmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg); -+ -+ /* == GP == */ -+ -+ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00); -+ writel(regs->gp.r.src_offset, par->gp_regs + 0x04); -+ writel(regs->gp.r.stride, par->gp_regs + 0x08); -+ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C); -+ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10); -+ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14); -+ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18); -+ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C); -+ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20); -+ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24); -+ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28); -+ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C); -+ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30); -+ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34); -+ -+ /* Writing to these registers would cause a blt to happen */ -+ /* 0x38, 0x3c, 0x40 */ -+ -+ /* Status register (0x44) is read only */ -+ -+ writel(regs->gp.r.hst_src, par->gp_regs + 0x48); -+ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c); -+ writel(regs->gp.r.cmd_top, par->gp_regs + 0x50); -+ writel(regs->gp.r.cmd_bot, par->gp_regs + 0x54); -+ writel(regs->gp.r.cmd_read, par->gp_regs + 0x58); -+ writel(regs->gp.r.cmd_write, par->gp_regs + 0x5C); -+ writel(regs->gp.r.ch3_offset, par->gp_regs + 0x60); -+ writel(regs->gp.r.ch3_mode_str, par->gp_regs + 0x64); -+ writel(regs->gp.r.ch3_width, par->gp_regs + 0x6C); -+ writel(regs->gp.r.ch3_hsrc, par->gp_regs + 0x70); -+ -+ /* FIXME: Restore the LUT data here */ -+ -+ writel(regs->gp.r.int_cntrl, par->gp_regs + 0x70); -+ -+ /* == DC == */ -+ -+ /* Write the unlock value */ -+ writel(0x4758, par->dc_regs + 0x00); -+ -+ /* Write the palette data first */ -+ -+ writel(0, par->dc_regs + 0x70); -+ -+ for(i = 0; i < DC_PAL_SIZE; i++) -+ writel(regs->pal[i], par->dc_regs + 0x74); -+ -+ /* MSRs */ -+ wrmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare); -+ -+ /* Write the gcfg register without the enables */ -+ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04); -+ -+ /* Write the vcfg register without the enables */ -+ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08); -+ -+ /* Write the rest of the active registers */ -+ writel(regs->dc.r.arb, par->dc_regs + 0x0C); -+ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10); -+ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14); -+ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18); -+ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C); -+ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20); -+ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24); -+ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28); -+ writel(regs->dc.r.dctop, par->dc_regs + 0x2c); -+ writel(regs->dc.r.line_size, par->dc_regs + 0x30); -+ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34); -+ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38); -+ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40); -+ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44); -+ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48); -+ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50); -+ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54); -+ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58); -+ writel(regs->dc.r.fbactive, par->dc_regs + 0x5c); -+ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60); -+ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64); -+ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68); -+ -+ /* Skip register 0x6C (line_cnt), 0x70/0x74 (palette), -+ 0x78 (diagnostic), and 0x7c (diagnostic) -+ */ -+ -+ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80); -+ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84); -+ writel(regs->dc.r.dv_ctl, par->dc_regs + 0x88); -+ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C); -+ -+ writel(regs->dc.r.gfx_scale, par->dc_regs + 0x90); -+ writel(regs->dc.r.irq_filt_ctl, par->dc_regs + 0x94); -+ writel(regs->dc.r.filt_coeff1, par->dc_regs + 0x98); -+ writel(regs->dc.r.filt_coeff2, par->dc_regs + 0x9C); -+ writel(regs->dc.r.vbi_event_ctl, par->dc_regs + 0xA0); -+ -+ writel(regs->dc.r.vbi_odd_ctl, par->dc_regs + 0xA4); -+ writel(regs->dc.r.vbi_hor, par->dc_regs + 0xA8); -+ writel(regs->dc.r.vbi_ln_odd, par->dc_regs + 0xAC); -+ writel(regs->dc.r.vbi_ln_event, par->dc_regs + 0xB0); -+ writel(regs->dc.r.vbi_pitch, par->dc_regs + 0xB4); -+ writel(regs->dc.r.clr_key, par->dc_regs + 0xB8); -+ writel(regs->dc.r.clr_key_mask, par->dc_regs + 0xBC); -+ -+ writel(regs->dc.r.clr_key_x, par->dc_regs + 0xC0); -+ writel(regs->dc.r.clr_key_y, par->dc_regs + 0xC4); -+ writel(regs->dc.r.irq, par->dc_regs + 0xC8); -+ writel(regs->dc.r.genlk_ctrl, par->dc_regs + 0xD4); -+ -+ writel(regs->dc.r.vid_even_y_st_offset, par->dc_regs + 0xD8); -+ writel(regs->dc.r.vid_even_u_st_offset, par->dc_regs + 0xDC); -+ writel(regs->dc.r.vid_even_v_st_offset, par->dc_regs + 0xE0); -+ -+ writel(regs->dc.r.v_active_even_timing, par->dc_regs + 0xE4); -+ writel(regs->dc.r.v_blank_even_timing, par->dc_regs + 0xE8); -+ writel(regs->dc.r.v_sync_even_timing, par->dc_regs + 0xEC); -+ -+ /* == VP == */ -+ -+ /* MSR */ -+ wrmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel); -+ -+ /* Write gamma information first */ -+ -+ writel(0, par->df_regs + 0x38); -+ -+ for(i = 0; i <= 0xFF; i++) -+ writel((u32) regs->gamma[i], par->df_regs + 0x40); -+ -+ /* Don't enable video yet */ -+ writel((u32) regs->vp.r.vcfg & ~0x01, par->df_regs + 0x00); -+ -+ /* Don't enable the CRT yet */ -+ writel((u32) regs->vp.r.dcfg & ~0x0F, par->df_regs + 0x08); -+ -+ /* Write the rest of the VP registers */ -+ -+ writel((u32) regs->vp.r.vx, par->df_regs + 0x10); -+ writel((u32) regs->vp.r.vy, par->df_regs + 0x18); -+ writel((u32) regs->vp.r.vs, par->df_regs + 0x20); -+ writel((u32) regs->vp.r.vck, par->df_regs + 0x28); -+ writel((u32) regs->vp.r.vcm, par->df_regs + 0x30); -+ writel((u32) regs->vp.r.misc, par->df_regs + 0x50); -+ writel((u32) regs->vp.r.ccs, par->df_regs + 0x58); -+ writel((u32) regs->vp.r.vdc, par->df_regs + 0x78); -+ writel((u32) regs->vp.r.vco, par->df_regs + 0x80); -+ writel((u32) regs->vp.r.crc, par->df_regs + 0x88); -+ writel((u32) regs->vp.r.vde, par->df_regs + 0x98); -+ writel((u32) regs->vp.r.cck, par->df_regs + 0xA0); -+ writel((u32) regs->vp.r.ccm, par->df_regs + 0xA8); -+ writel((u32) regs->vp.r.cc1, par->df_regs + 0xB0); -+ writel((u32) regs->vp.r.cc2, par->df_regs + 0xB8); -+ writel((u32) regs->vp.r.a1x, par->df_regs + 0xC0); -+ writel((u32) regs->vp.r.a1y, par->df_regs + 0xC8); -+ writel((u32) regs->vp.r.a1c, par->df_regs + 0xD0); -+ writel((u32) regs->vp.r.a1t, par->df_regs + 0xD8); -+ writel((u32) regs->vp.r.a2x, par->df_regs + 0xE0); -+ writel((u32) regs->vp.r.a2y, par->df_regs + 0xE8); -+ writel((u32) regs->vp.r.a2c, par->df_regs + 0xF0); -+ writel((u32) regs->vp.r.a2t, par->df_regs + 0xF8); -+ writel((u32) regs->vp.r.a3x, par->df_regs + 0x100); -+ writel((u32) regs->vp.r.a3y, par->df_regs + 0x108); -+ writel((u32) regs->vp.r.a3c, par->df_regs + 0x110); -+ writel((u32) regs->vp.r.a3t, par->df_regs + 0x118); -+ writel((u32) regs->vp.r.vrr, par->df_regs + 0x120); -+ -+ writel((u32) regs->vp.r.vye, par->df_regs + 0x138); -+ writel((u32) regs->vp.r.a1ye, par->df_regs + 0x140); -+ writel((u32) regs->vp.r.a2ye, par->df_regs + 0x148); -+ writel((u32) regs->vp.r.a3ye, par->df_regs + 0x150); -+ -+ /* == FP == */ -+ -+ writel((u32) regs->fp.r.pt1, par->df_regs + 0x400); -+ writel((u32) regs->fp.r.pt2, par->df_regs + 0x408); -+ writel((u32) regs->fp.r.dfc, par->df_regs + 0x418); -+ writel(regs->fp.r.dca, par->df_regs + 0x448); -+ writel(regs->fp.r.dmd, par->df_regs + 0x450); -+ writel(regs->fp.r.crc, par->df_regs + 0x458); -+ -+ /* Final enables */ -+ -+ val = readl(par->df_regs + 0x410); -+ -+ /* Control the panel */ -+ if (regs->fp.r.pm & (1 << 24)) { -+ -+ if (!(val & 0x09)) -+ writel(regs->fp.r.pm, par->df_regs + 0x410); -+ } -+ else { -+ if (!(val & 0x05)) -+ writel(regs->fp.r.pm, par->df_regs + 0x410); -+ } -+ -+ /* Turn everything on */ -+ -+ writel(regs->dc.r.gcfg, par->dc_regs + 0x04); -+ writel((u32) regs->vp.r.vcfg, par->df_regs + 0x00); -+ writel((u32) regs->vp.r.dcfg, par->df_regs + 0x08); -+ writel(regs->dc.r.dcfg, par->dc_regs + 0x08); -+} -+ -+static int lx_power_on = 1; -+ -+int lx_shutdown(struct fb_info *info) -+{ -+ struct lxfb_par *par = info->par; -+ -+ if (lx_power_on == 0) -+ return 0; -+ -+ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); -+ lx_save_regs(info, &saved_regs); -+ lx_graphics_disable(info); -+ -+ lx_power_on = 0; -+ return 0; -+} -+ -+int lx_powerup(struct fb_info *info) -+{ -+ struct lxfb_par *par = info->par; -+ -+ if (lx_power_on == 1) -+ return 0; -+ -+ lx_restore_regs(info, &saved_regs); -+ writel(0, par->dc_regs + DC_UNLOCK); -+ -+ lx_power_on = 1; -+ return 0; -+} -Index: linux-2.6.23.17/drivers/video/geode/video_gx.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/geode/video_gx.c -+++ linux-2.6.23.17/drivers/video/geode/video_gx.c -@@ -16,10 +16,14 @@ - #include - #include - #include -+#include - - #include "geodefb.h" - #include "video_gx.h" -+#include "display_gx.h" - -+/* This structure is used to store the saved registers during suspend */ -+static struct geoderegs gx_saved_regs; - - /* - * Tables of register settings for various DOTCLKs. -@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_ - { 13888, POSTDIV3, 0x000007E1 }, /* 72.0000 */ - { 13426, PREMULT2, 0x00000F4A }, /* 74.4810 */ - { 13333, 0, 0x00000052 }, /* 75.0000 */ -- { 12698, 0, 0x00000056 }, /* 78.7500 */ -+ { 12698, 0, 0x00000056 }, /* 78.7500 */ - { 12500, POSTDIV3|PREMULT2, 0x00000709 }, /* 80.0000 */ - { 11135, PREMULT2, 0x00000262 }, /* 89.8000 */ - { 10582, 0, 0x000002D2 }, /* 94.5000 */ -@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_ - { 4357, 0, 0x0000057D }, /* 229.5000 */ - }; - --static void gx_set_dclk_frequency(struct fb_info *info) -+void gx_set_dclk_frequency(struct fb_info *info) - { -+ struct geodefb_par *par = info->par; - const struct gx_pll_entry *pll_table; - int pll_table_len; - int i, best_i; -@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct - do { - rdmsrl(MSR_GLCP_DOTPLL, dotpll); - } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK)); -+ -+ par->curdclk = pll_table[best_i].dotpll_value; - } - --static void --gx_configure_tft(struct fb_info *info) -+/* Find out the current clock - we will use this information to avoid -+ re-programming it if we don't need to */ -+ -+unsigned int gx_get_dclk(struct fb_info *info) - { -- struct geodefb_par *par = info->par; -- unsigned long val; -- unsigned long fp; -+ const struct gx_pll_entry *pll_table; -+ int pll_table_len; -+ u64 dotpll; -+ int i; - -- /* Set up the DF pad select MSR */ -+ if (cpu_data->x86_mask == 1) { -+ pll_table = gx_pll_table_14MHz; -+ pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz); -+ } else { -+ pll_table = gx_pll_table_48MHz; -+ pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz); -+ } - -- rdmsrl(GX_VP_MSR_PAD_SELECT, val); -- val &= ~GX_VP_PAD_SELECT_MASK; -- val |= GX_VP_PAD_SELECT_TFT; -- wrmsrl(GX_VP_MSR_PAD_SELECT, val); -+ rdmsrl(MSR_GLCP_DOTPLL, dotpll); - -- /* Turn off the panel */ -+ for(i = 0; i < pll_table_len; i++) { -+ if (pll_table[i].dotpll_value == (u32) (dotpll >> 32)) -+ break; -+ } -+ -+ return (i == pll_table_len) ? 0 : pll_table[i].pixclock; -+} - -- fp = readl(par->vid_regs + GX_FP_PM); -- fp &= ~GX_FP_PM_P; -- writel(fp, par->vid_regs + GX_FP_PM); - -- /* Set timing 1 */ -+#define CMP(val, mask, res) (((val) & (mask)) == (res)) - -- fp = readl(par->vid_regs + GX_FP_PT1); -- fp &= GX_FP_PT1_VSIZE_MASK; -- fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT; -- writel(fp, par->vid_regs + GX_FP_PT1); -+static void -+gx_configure_tft(struct fb_info *info) { - -- /* Timing 2 */ -- /* Set bits that are always on for TFT */ -+ struct geodefb_par *par = info->par; -+ u32 val, fp = 0, fp1, fp2, sync = 0; - -- fp = 0x0F100000; -+ /* Set up the DF pad select MSR */ - -- /* Add sync polarity */ -+ rdmsrl(GX_VP_MSR_PAD_SELECT, val); -+ -+ if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) { -+ val &= ~GX_VP_PAD_SELECT_MASK; -+ val |= GX_VP_PAD_SELECT_TFT; -+ wrmsrl(GX_VP_MSR_PAD_SELECT, val); -+ } - - if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) -- fp |= GX_FP_PT2_VSP; -+ sync |= GX_FP_PT2_VSP; - - if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) -- fp |= GX_FP_PT2_HSP; -+ sync |= GX_FP_PT2_HSP; - -- writel(fp, par->vid_regs + GX_FP_PT2); -+ /* We only need to turn off the panel if something changed */ - -- /* Set the dither control */ -- writel(0x70, par->vid_regs + GX_FP_DFC); -+ fp1 = readl(par->vid_regs + GX_FP_PT1); -+ fp2 = readl(par->vid_regs + GX_FP_PT2); -+ -+ if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) || -+ (fp2 != (0x0F100000 | sync))) { -+ -+ /* Turn off the panel */ -+ -+#ifdef NOTUSED -+ /* Do we really need to turn off the panel? */ -+ /* Possibly - we have a glitch somewhere */ - -- /* Enable the FP data and power (in case the BIOS didn't) */ -+ fp = readl(par->vid_regs + GX_FP_PM); -+ fp &= ~GX_FP_PM_P; -+ writel(fp, par->vid_regs + GX_FP_PM); -+#endif - -- fp = readl(par->vid_regs + GX_DCFG); -- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN; -- writel(fp, par->vid_regs + GX_DCFG); -+ /* Timing 1 */ -+ fp1 &= GX_FP_PT1_VSIZE_MASK; -+ fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT; -+ writel(fp, par->vid_regs + GX_FP_PT1); - -- /* Unblank the panel */ -+ /* Timing 2 */ -+ writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2); -+ } -+ -+ /* Set the dither control */ -+ if (readl(par->vid_regs + GX_FP_DFC) != 0x70) { -+ writel(0x70, par->vid_regs + GX_FP_DFC); -+ } -+ -+ /* Turn on the panel */ - - fp = readl(par->vid_regs + GX_FP_PM); -- fp |= GX_FP_PM_P; -- writel(fp, par->vid_regs + GX_FP_PM); -+ -+ if (!(fp & 0x09)) -+ writel(fp | GX_FP_PM_P, par->vid_regs + GX_FP_PM); - } - -+#define DCFG_DEFAULT_VAL GX_DCFG_CRT_SYNC_SKW_DFLT | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN | \ -+GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN -+ - static void gx_configure_display(struct fb_info *info) - { - struct geodefb_par *par = info->par; -- u32 dcfg, misc; -+ u32 dcfg, misc, sync = 0; - - /* Set up the MISC register */ -- - misc = readl(par->vid_regs + GX_MISC); - -- /* Power up the DAC */ -- misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); -+ /* We leave gamma enabled if it was already enabled. -+ Although the hardware enables it without setting -+ up the gamma table, the BIOS or bootloader ought -+ to have either disabled it or loaded a table by now */ - -- /* Disable gamma correction */ -- misc |= GX_MISC_GAM_EN; - -- writel(misc, par->vid_regs + GX_MISC); - -- /* Write the display configuration */ -- dcfg = readl(par->vid_regs + GX_DCFG); -+ if (par->enable_crt) { -+ /* Power up the CRT DACs */ -+ if (misc & ( GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN)) { -+ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); -+ writel(misc, par->vid_regs + GX_MISC); -+ } - -- /* Disable hsync and vsync */ -- dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); -- writel(dcfg, par->vid_regs + GX_DCFG); -+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) -+ sync |= GX_DCFG_CRT_HSYNC_POL; - -- /* Clear bits from existing mode. */ -- dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK -- | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL -- | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); -+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) -+ sync |= GX_DCFG_CRT_VSYNC_POL; -+ } -+ else { -+ /* Turn off the CRT DACs in FP mode - we don't need them */ -+ if ((misc & (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN))) { -+ misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); -+ writel(misc, par->vid_regs + GX_MISC); -+ } -+ } - -- /* Set default sync skew. */ -- dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT; -+ /* Write the display configuration */ -+ dcfg = readl(par->vid_regs + GX_DCFG); - -- /* Enable hsync and vsync. */ -- dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN; -+ if (!CMP(dcfg, DCFG_DEFAULT_VAL | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL, -+ DCFG_DEFAULT_VAL | sync)) { - -- /* Sync polarities. */ -- if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) -- dcfg |= GX_DCFG_CRT_HSYNC_POL; -- if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) -- dcfg |= GX_DCFG_CRT_VSYNC_POL; -+ /* Disable hsync and vsync */ -+ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); -+ writel(dcfg, par->vid_regs + GX_DCFG); - -- /* Enable the display logic */ -- /* Set up the DACS to blank normally */ -+ /* Clear bits from existing mode. */ -+ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK -+ | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL -+ | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); - -- dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN; -+ /* Set default sync skew. */ -+ dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT; - -- /* Enable the external DAC VREF? */ -+ /* Enable hsync and vsync. */ -+ dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN; - -- writel(dcfg, par->vid_regs + GX_DCFG); -+ /* Enable the display logic */ -+ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN; -+ -+ writel(dcfg, par->vid_regs + GX_DCFG); -+ } - - /* Set up the flat panel (if it is enabled) */ - -@@ -289,6 +348,100 @@ static void gx_configure_display(struct - gx_configure_tft(info); - } - -+int gxfb_powerdown(struct fb_info *info) -+{ -+ struct geodefb_par *par = info->par; -+ -+ /* We're already suspended */ -+ -+ if (par->state != FB_POWER_STATE_ON) -+ return 0; -+ -+ /* Save the registers */ -+ gx_save_regs(info, &gx_saved_regs); -+ -+ /* Shut down the engine */ -+ -+ writel(gx_saved_regs.vp.r.vcfg & ~0x01, par->vid_regs + GX_VCFG); -+ writel(gx_saved_regs.vp.r.dcfg & ~0x0F, par->vid_regs + GX_DCFG); -+ -+ /* Turn off the flat panel unless we are attached to a DCON */ -+ if (!olpc_has_dcon()) -+ writel(gx_saved_regs.fp.r.pm & ~GX_FP_PM_P, par->vid_regs + GX_FP_PM); -+ -+ writel(0x4758, par->dc_regs + DC_UNLOCK); -+ -+ writel(gx_saved_regs.dc.r.gcfg & ~0x0F, -+ par->dc_regs + DC_GENERAL_CFG); -+ -+ writel(gx_saved_regs.dc.r.dcfg & ~0x19, -+ par->dc_regs + DC_DISPLAY_CFG); -+ -+ par->state = FB_POWER_STATE_SUSPEND; -+ -+ return 0; -+} -+ -+int gxfb_powerup(struct fb_info *info) -+{ -+ struct geodefb_par *par = info->par; -+ u32 val; -+ -+ if (par->state == FB_POWER_STATE_SUSPEND) { -+ -+ writel(gx_saved_regs.dc.r.dcfg, -+ par->dc_regs + DC_DISPLAY_CFG); -+ -+ writel(gx_saved_regs.vp.r.vcfg, par->vid_regs + GX_VCFG); -+ writel(gx_saved_regs.vp.r.dcfg, par->vid_regs + GX_DCFG); -+ -+ val = readl(par->vid_regs + GX_FP_PM); -+ -+ /* power up the panel if it needs it; we don't always power it down */ -+ if (!(val & 0x09)) { -+ writel(gx_saved_regs.fp.r.pm, par->vid_regs + GX_FP_PM); -+ mdelay(64); -+ } -+ } -+ -+ /* If the panel is currently on its way up, then wait up to 100ms -+ for it */ -+ -+ if (readl(par->vid_regs + GX_FP_PM) & 0x08) { -+ int i; -+ -+ for(i = 0; i < 10; i++) { -+ if (readl(par->vid_regs + GX_FP_PM) & 0x01) -+ break; -+ -+ mdelay(10); -+ } -+ -+ if (i == 10) -+ printk(KERN_ERR "gxfb: Panel power up timed out\n"); -+ } -+ -+ if (par->state == FB_POWER_STATE_ON) -+ return 0; -+ -+ switch(par->state) { -+ case FB_POWER_STATE_OFF: -+ gx_restore_regs(info, &gx_saved_regs); -+ break; -+ -+ case FB_POWER_STATE_SUSPEND: -+ /* Do this because it will turn on the FIFO which will -+ start the line count */ -+ writel(gx_saved_regs.dc.r.gcfg, -+ par->dc_regs + DC_GENERAL_CFG); -+ writel(0x0, par->dc_regs + DC_UNLOCK); -+ break; -+ } -+ -+ par->state = FB_POWER_STATE_ON; -+ return 0; -+} -+ - static int gx_blank_display(struct fb_info *info, int blank_mode) - { - struct geodefb_par *par = info->par; -@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_in - default: - return -EINVAL; - } -+ - dcfg = readl(par->vid_regs + GX_DCFG); - dcfg &= ~(GX_DCFG_DAC_BL_EN - | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN); -@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_in - dcfg |= GX_DCFG_VSYNC_EN; - writel(dcfg, par->vid_regs + GX_DCFG); - -- /* Power on/off flat panel. */ -+ /* Power on/off flat panel */ - - if (par->enable_crt == 0) { - fp_pm = readl(par->vid_regs + GX_FP_PM); -@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_in - return 0; - } - -+extern struct fb_info *gxfb_info; -+ -+/* This function controls the flatpanel power sequencing - this is used -+ by the OLPC power management engine to enable the FP sequencing much -+ earlier in the resume process -+*/ -+ -+void gxfb_flatpanel_control(int state) -+{ -+ struct geodefb_par *par = gxfb_info->par; -+ u32 val, fp = readl(par->vid_regs + GX_FP_PM); -+ val = fp; -+ -+ /* Turn on the panel if it isn't aleady */ -+ -+ if (state) { -+ if (!(val & 0x01)) -+ val |= GX_FP_PM_P; -+ } -+ else { -+ if (!(val & 0x02)) -+ val &= ~GX_FP_PM_P; -+ } -+ -+ if (val != fp) -+ writel(val, par->vid_regs + GX_FP_PM); -+} -+ - struct geode_vid_ops gx_vid_ops = { - .set_dclk = gx_set_dclk_frequency, -+ .get_dclk = gx_get_dclk, - .configure_display = gx_configure_display, - .blank_display = gx_blank_display, - }; -Index: linux-2.6.23.17/drivers/video/geode/video_gx.h -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/geode/video_gx.h -+++ linux-2.6.23.17/drivers/video/geode/video_gx.h -@@ -11,6 +11,8 @@ - #ifndef __VIDEO_GX_H__ - #define __VIDEO_GX_H__ - -+#include "geode_regs.h" -+ - extern struct geode_vid_ops gx_vid_ops; - - /* GX Flatpanel control MSR */ -@@ -20,6 +22,8 @@ extern struct geode_vid_ops gx_vid_ops; - - /* Geode GX video processor registers */ - -+#define GX_VCFG 0x0000 -+ - #define GX_DCFG 0x0008 - # define GX_DCFG_CRT_EN 0x00000001 - # define GX_DCFG_HSYNC_EN 0x00000002 -@@ -42,6 +46,14 @@ extern struct geode_vid_ops gx_vid_ops; - #define GX_MISC_DAC_PWRDN 0x00000400 - #define GX_MISC_A_PWRDN 0x00000800 - -+/* Gamma correction RAM - address and data registers */ -+ -+#define GX_GAR 0x038 -+#define GX_GDR 0x040 -+ -+#define GXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */ -+#define GXFB_GAMMA_SIZE (GXFB_GAMMA_DWORDS * sizeof(unsigned int)) -+ - /* Geode GX flat panel display control registers */ - - #define GX_FP_PT1 0x0400 -@@ -69,4 +81,13 @@ extern struct geode_vid_ops gx_vid_ops; - # define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull) - # define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull) - -+int gxfb_powerdown(struct fb_info *info); -+int gxfb_powerup(struct fb_info *info); -+ -+void gx_set_dclk_frequency(struct fb_info *info); -+unsigned int gx_get_dclk(struct fb_info *info); -+ -+void gx_save_regs(struct fb_info *info, struct geoderegs *regs); -+void gx_restore_regs(struct fb_info *info, struct geoderegs *regs); -+ - #endif /* !__VIDEO_GX_H__ */ -Index: linux-2.6.23.17/drivers/video/modedb.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/video/modedb.c -+++ linux-2.6.23.17/drivers/video/modedb.c -@@ -33,6 +33,8 @@ const char *global_mode_option; - * Standard video mode definitions (taken from XFree86) - */ - -+#define DEFAULT_MODEDB_INDEX 0 -+ - static const struct fb_videomode modedb[] = { - { - /* 640x400 @ 70 Hz, 31.5 kHz hsync */ -@@ -504,7 +506,8 @@ int fb_find_mode(struct fb_var_screeninf - } - - if (!default_mode) -- default_mode = &db[0]; -+ default_mode = (db == modedb) ? -+ &modedb[DEFAULT_MODEDB_INDEX] : &db[0]; - - if (!default_bpp) - default_bpp = 8; -Index: linux-2.6.23.17/fs/Kconfig -=================================================================== ---- linux-2.6.23.17.orig/fs/Kconfig -+++ linux-2.6.23.17/fs/Kconfig -@@ -1003,6 +1003,23 @@ config HUGETLBFS - config HUGETLB_PAGE - def_bool HUGETLBFS - -+config PROMFS_FS -+ tristate "PromFS IEEE 1275 file system support" -+ depends on SPARC || PPC || OLPC -+ help -+ PromFS is a file system interface to various IEEE-1275 compatible -+ firmwares. If you have such a firmware (Sparc64, PowerPC, and -+ some other architectures and embedded systems have such firmwares, -+ with names like "OpenBoot (tm)" and "OpenFirmware"), say Y here -+ to be able to access the firmware's device-tree from Linux. -+ -+ The firmware device-tree is available as a virtual file system, -+ can be mounted under /prom with the command "mount -t promfs -+ none /prom". -+ -+ To compile PromFS support as a module, choose M here; the module -+ will be called promfs. If unsure, choose M. -+ - config RAMFS - bool - default y -@@ -1229,6 +1246,14 @@ config JFFS2_FS_WRITEBUFFER - - NOR flash with transparent ECC - - DataFlash - -+config JFFS2_FS_WBUF_VERIFY -+ bool "Verify JFFS2 write-buffer reads" -+ depends on JFFS2_FS_WRITEBUFFER -+ default n -+ help -+ This causes JFFS2 to read back every page written through the -+ write-buffer, and check for errors. -+ - config JFFS2_SUMMARY - bool "JFFS2 summary support (EXPERIMENTAL)" - depends on JFFS2_FS && EXPERIMENTAL -@@ -1299,52 +1324,52 @@ config JFFS2_ZLIB - select ZLIB_DEFLATE - depends on JFFS2_FS - default y -- help -- Zlib is designed to be a free, general-purpose, legally unencumbered, -- lossless data-compression library for use on virtually any computer -- hardware and operating system. See for -- further information. -+ help -+ Zlib is designed to be a free, general-purpose, legally unencumbered, -+ lossless data-compression library for use on virtually any computer -+ hardware and operating system. See for -+ further information. - -- Say 'Y' if unsure. -+ Say 'Y' if unsure. - - config JFFS2_RTIME - bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS - depends on JFFS2_FS - default y -- help -- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. -+ help -+ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. - - config JFFS2_RUBIN - bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS - depends on JFFS2_FS - default n -- help -- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. -+ help -+ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. - - choice -- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS -- default JFFS2_CMODE_PRIORITY -- depends on JFFS2_FS -- help -- You can set here the default compression mode of JFFS2 from -- the available compression modes. Don't touch if unsure. -+ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS -+ default JFFS2_CMODE_PRIORITY -+ depends on JFFS2_FS -+ help -+ You can set here the default compression mode of JFFS2 from -+ the available compression modes. Don't touch if unsure. - - config JFFS2_CMODE_NONE -- bool "no compression" -- help -- Uses no compression. -+ bool "no compression" -+ help -+ Uses no compression. - - config JFFS2_CMODE_PRIORITY -- bool "priority" -- help -- Tries the compressors in a predefined order and chooses the first -- successful one. -+ bool "priority" -+ help -+ Tries the compressors in a predefined order and chooses the first -+ successful one. - - config JFFS2_CMODE_SIZE -- bool "size (EXPERIMENTAL)" -- help -- Tries all compressors and chooses the one which has the smallest -- result. -+ bool "size (EXPERIMENTAL)" -+ help -+ Tries all compressors and chooses the one which has the smallest -+ result. - - endchoice - -Index: linux-2.6.23.17/fs/Makefile -=================================================================== ---- linux-2.6.23.17.orig/fs/Makefile -+++ linux-2.6.23.17/fs/Makefile -@@ -110,6 +110,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/ - obj-$(CONFIG_FUSE_FS) += fuse/ - obj-$(CONFIG_UDF_FS) += udf/ - obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/ -+obj-$(CONFIG_PROMFS_FS) += promfs/ - obj-$(CONFIG_JFS_FS) += jfs/ - obj-$(CONFIG_XFS_FS) += xfs/ - obj-$(CONFIG_9P_FS) += 9p/ -Index: linux-2.6.23.17/fs/jffs2/background.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/background.c -+++ linux-2.6.23.17/fs/jffs2/background.c -@@ -23,8 +23,8 @@ static int jffs2_garbage_collect_thread( - void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c) - { - spin_lock(&c->erase_completion_lock); -- if (c->gc_task && jffs2_thread_should_wake(c)) -- send_sig(SIGHUP, c->gc_task, 1); -+ if (c->gc_task && jffs2_thread_should_wake(c)) -+ send_sig(SIGHUP, c->gc_task, 1); - spin_unlock(&c->erase_completion_lock); - } - -Index: linux-2.6.23.17/fs/jffs2/compr.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/compr.c -+++ linux-2.6.23.17/fs/jffs2/compr.c -@@ -5,7 +5,7 @@ - * Created by Arjan van de Ven - * - * Copyright © 2004 Ferenc Havasi , -- * University of Szeged, Hungary -+ * University of Szeged, Hungary - * - * For licensing information, see the file 'LICENCE' in this directory. - * -@@ -43,121 +43,122 @@ static uint32_t none_stat_compr_blocks=0 - * *datalen accordingly to show the amount of data which were compressed. - */ - uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, -- unsigned char *data_in, unsigned char **cpage_out, -- uint32_t *datalen, uint32_t *cdatalen) -+ unsigned char *data_in, unsigned char **cpage_out, -+ uint32_t *datalen, uint32_t *cdatalen) - { - int ret = JFFS2_COMPR_NONE; -- int compr_ret; -- struct jffs2_compressor *this, *best=NULL; -- unsigned char *output_buf = NULL, *tmp_buf; -- uint32_t orig_slen, orig_dlen; -- uint32_t best_slen=0, best_dlen=0; -- -- switch (jffs2_compression_mode) { -- case JFFS2_COMPR_MODE_NONE: -- break; -- case JFFS2_COMPR_MODE_PRIORITY: -- output_buf = kmalloc(*cdatalen,GFP_KERNEL); -- if (!output_buf) { -- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n"); -- goto out; -- } -- orig_slen = *datalen; -- orig_dlen = *cdatalen; -- spin_lock(&jffs2_compressor_list_lock); -- list_for_each_entry(this, &jffs2_compressor_list, list) { -- /* Skip decompress-only backwards-compatibility and disabled modules */ -- if ((!this->compress)||(this->disabled)) -- continue; -- -- this->usecount++; -- spin_unlock(&jffs2_compressor_list_lock); -- *datalen = orig_slen; -- *cdatalen = orig_dlen; -- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL); -- spin_lock(&jffs2_compressor_list_lock); -- this->usecount--; -- if (!compr_ret) { -- ret = this->compr; -- this->stat_compr_blocks++; -- this->stat_compr_orig_size += *datalen; -- this->stat_compr_new_size += *cdatalen; -- break; -- } -- } -- spin_unlock(&jffs2_compressor_list_lock); -- if (ret == JFFS2_COMPR_NONE) kfree(output_buf); -- break; -- case JFFS2_COMPR_MODE_SIZE: -- orig_slen = *datalen; -- orig_dlen = *cdatalen; -- spin_lock(&jffs2_compressor_list_lock); -- list_for_each_entry(this, &jffs2_compressor_list, list) { -- /* Skip decompress-only backwards-compatibility and disabled modules */ -- if ((!this->compress)||(this->disabled)) -- continue; -- /* Allocating memory for output buffer if necessary */ -- if ((this->compr_buf_sizecompr_buf)) { -- spin_unlock(&jffs2_compressor_list_lock); -- kfree(this->compr_buf); -- spin_lock(&jffs2_compressor_list_lock); -- this->compr_buf_size=0; -- this->compr_buf=NULL; -- } -- if (!this->compr_buf) { -- spin_unlock(&jffs2_compressor_list_lock); -- tmp_buf = kmalloc(orig_dlen,GFP_KERNEL); -- spin_lock(&jffs2_compressor_list_lock); -- if (!tmp_buf) { -- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen); -- continue; -- } -- else { -- this->compr_buf = tmp_buf; -- this->compr_buf_size = orig_dlen; -- } -- } -- this->usecount++; -- spin_unlock(&jffs2_compressor_list_lock); -- *datalen = orig_slen; -- *cdatalen = orig_dlen; -- compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL); -- spin_lock(&jffs2_compressor_list_lock); -- this->usecount--; -- if (!compr_ret) { -- if ((!best_dlen)||(best_dlen>*cdatalen)) { -- best_dlen = *cdatalen; -- best_slen = *datalen; -- best = this; -- } -- } -- } -- if (best_dlen) { -- *cdatalen = best_dlen; -- *datalen = best_slen; -- output_buf = best->compr_buf; -- best->compr_buf = NULL; -- best->compr_buf_size = 0; -- best->stat_compr_blocks++; -- best->stat_compr_orig_size += best_slen; -- best->stat_compr_new_size += best_dlen; -- ret = best->compr; -- } -- spin_unlock(&jffs2_compressor_list_lock); -- break; -- default: -- printk(KERN_ERR "JFFS2: unknow compression mode.\n"); -- } -+ int compr_ret; -+ struct jffs2_compressor *this, *best=NULL; -+ unsigned char *output_buf = NULL, *tmp_buf; -+ uint32_t orig_slen, orig_dlen; -+ uint32_t best_slen=0, best_dlen=0; -+ -+ switch (jffs2_compression_mode) { -+ case JFFS2_COMPR_MODE_NONE: -+ break; -+ case JFFS2_COMPR_MODE_PRIORITY: -+ output_buf = kmalloc(*cdatalen,GFP_KERNEL); -+ if (!output_buf) { -+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n"); -+ goto out; -+ } -+ orig_slen = *datalen; -+ orig_dlen = *cdatalen; -+ spin_lock(&jffs2_compressor_list_lock); -+ list_for_each_entry(this, &jffs2_compressor_list, list) { -+ /* Skip decompress-only backwards-compatibility and disabled modules */ -+ if ((!this->compress)||(this->disabled)) -+ continue; -+ -+ this->usecount++; -+ spin_unlock(&jffs2_compressor_list_lock); -+ *datalen = orig_slen; -+ *cdatalen = orig_dlen; -+ compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL); -+ spin_lock(&jffs2_compressor_list_lock); -+ this->usecount--; -+ if (!compr_ret) { -+ ret = this->compr; -+ this->stat_compr_blocks++; -+ this->stat_compr_orig_size += *datalen; -+ this->stat_compr_new_size += *cdatalen; -+ break; -+ } -+ } -+ spin_unlock(&jffs2_compressor_list_lock); -+ if (ret == JFFS2_COMPR_NONE) -+ kfree(output_buf); -+ break; -+ case JFFS2_COMPR_MODE_SIZE: -+ orig_slen = *datalen; -+ orig_dlen = *cdatalen; -+ spin_lock(&jffs2_compressor_list_lock); -+ list_for_each_entry(this, &jffs2_compressor_list, list) { -+ /* Skip decompress-only backwards-compatibility and disabled modules */ -+ if ((!this->compress)||(this->disabled)) -+ continue; -+ /* Allocating memory for output buffer if necessary */ -+ if ((this->compr_buf_sizecompr_buf)) { -+ spin_unlock(&jffs2_compressor_list_lock); -+ kfree(this->compr_buf); -+ spin_lock(&jffs2_compressor_list_lock); -+ this->compr_buf_size=0; -+ this->compr_buf=NULL; -+ } -+ if (!this->compr_buf) { -+ spin_unlock(&jffs2_compressor_list_lock); -+ tmp_buf = kmalloc(orig_dlen,GFP_KERNEL); -+ spin_lock(&jffs2_compressor_list_lock); -+ if (!tmp_buf) { -+ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen); -+ continue; -+ } -+ else { -+ this->compr_buf = tmp_buf; -+ this->compr_buf_size = orig_dlen; -+ } -+ } -+ this->usecount++; -+ spin_unlock(&jffs2_compressor_list_lock); -+ *datalen = orig_slen; -+ *cdatalen = orig_dlen; -+ compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL); -+ spin_lock(&jffs2_compressor_list_lock); -+ this->usecount--; -+ if (!compr_ret) { -+ if ((!best_dlen)||(best_dlen>*cdatalen)) { -+ best_dlen = *cdatalen; -+ best_slen = *datalen; -+ best = this; -+ } -+ } -+ } -+ if (best_dlen) { -+ *cdatalen = best_dlen; -+ *datalen = best_slen; -+ output_buf = best->compr_buf; -+ best->compr_buf = NULL; -+ best->compr_buf_size = 0; -+ best->stat_compr_blocks++; -+ best->stat_compr_orig_size += best_slen; -+ best->stat_compr_new_size += best_dlen; -+ ret = best->compr; -+ } -+ spin_unlock(&jffs2_compressor_list_lock); -+ break; -+ default: -+ printk(KERN_ERR "JFFS2: unknow compression mode.\n"); -+ } - out: -- if (ret == JFFS2_COMPR_NONE) { -- *cpage_out = data_in; -- *datalen = *cdatalen; -- none_stat_compr_blocks++; -- none_stat_compr_size += *datalen; -- } -- else { -- *cpage_out = output_buf; -- } -+ if (ret == JFFS2_COMPR_NONE) { -+ *cpage_out = data_in; -+ *datalen = *cdatalen; -+ none_stat_compr_blocks++; -+ none_stat_compr_size += *datalen; -+ } -+ else { -+ *cpage_out = output_buf; -+ } - return ret; - } - -@@ -165,8 +166,8 @@ int jffs2_decompress(struct jffs2_sb_inf - uint16_t comprtype, unsigned char *cdata_in, - unsigned char *data_out, uint32_t cdatalen, uint32_t datalen) - { -- struct jffs2_compressor *this; -- int ret; -+ struct jffs2_compressor *this; -+ int ret; - - /* Older code had a bug where it would write non-zero 'usercompr' - fields. Deal with it. */ -@@ -177,32 +178,32 @@ int jffs2_decompress(struct jffs2_sb_inf - case JFFS2_COMPR_NONE: - /* This should be special-cased elsewhere, but we might as well deal with it */ - memcpy(data_out, cdata_in, datalen); -- none_stat_decompr_blocks++; -+ none_stat_decompr_blocks++; - break; - case JFFS2_COMPR_ZERO: - memset(data_out, 0, datalen); - break; - default: -- spin_lock(&jffs2_compressor_list_lock); -- list_for_each_entry(this, &jffs2_compressor_list, list) { -- if (comprtype == this->compr) { -- this->usecount++; -- spin_unlock(&jffs2_compressor_list_lock); -- ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL); -- spin_lock(&jffs2_compressor_list_lock); -- if (ret) { -- printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret); -- } -- else { -- this->stat_decompr_blocks++; -- } -- this->usecount--; -- spin_unlock(&jffs2_compressor_list_lock); -- return ret; -- } -- } -+ spin_lock(&jffs2_compressor_list_lock); -+ list_for_each_entry(this, &jffs2_compressor_list, list) { -+ if (comprtype == this->compr) { -+ this->usecount++; -+ spin_unlock(&jffs2_compressor_list_lock); -+ ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL); -+ spin_lock(&jffs2_compressor_list_lock); -+ if (ret) { -+ printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret); -+ } -+ else { -+ this->stat_decompr_blocks++; -+ } -+ this->usecount--; -+ spin_unlock(&jffs2_compressor_list_lock); -+ return ret; -+ } -+ } - printk(KERN_WARNING "JFFS2 compression type 0x%02x not available.\n", comprtype); -- spin_unlock(&jffs2_compressor_list_lock); -+ spin_unlock(&jffs2_compressor_list_lock); - return -EIO; - } - return 0; -@@ -210,108 +211,108 @@ int jffs2_decompress(struct jffs2_sb_inf - - int jffs2_register_compressor(struct jffs2_compressor *comp) - { -- struct jffs2_compressor *this; -+ struct jffs2_compressor *this; - -- if (!comp->name) { -- printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n"); -- return -1; -- } -- comp->compr_buf_size=0; -- comp->compr_buf=NULL; -- comp->usecount=0; -- comp->stat_compr_orig_size=0; -- comp->stat_compr_new_size=0; -- comp->stat_compr_blocks=0; -- comp->stat_decompr_blocks=0; -- D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name)); -- -- spin_lock(&jffs2_compressor_list_lock); -- -- list_for_each_entry(this, &jffs2_compressor_list, list) { -- if (this->priority < comp->priority) { -- list_add(&comp->list, this->list.prev); -- goto out; -- } -- } -- list_add_tail(&comp->list, &jffs2_compressor_list); -+ if (!comp->name) { -+ printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n"); -+ return -1; -+ } -+ comp->compr_buf_size=0; -+ comp->compr_buf=NULL; -+ comp->usecount=0; -+ comp->stat_compr_orig_size=0; -+ comp->stat_compr_new_size=0; -+ comp->stat_compr_blocks=0; -+ comp->stat_decompr_blocks=0; -+ D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name)); -+ -+ spin_lock(&jffs2_compressor_list_lock); -+ -+ list_for_each_entry(this, &jffs2_compressor_list, list) { -+ if (this->priority < comp->priority) { -+ list_add(&comp->list, this->list.prev); -+ goto out; -+ } -+ } -+ list_add_tail(&comp->list, &jffs2_compressor_list); - out: -- D2(list_for_each_entry(this, &jffs2_compressor_list, list) { -- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); -- }) -+ D2(list_for_each_entry(this, &jffs2_compressor_list, list) { -+ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); -+ }) - -- spin_unlock(&jffs2_compressor_list_lock); -+ spin_unlock(&jffs2_compressor_list_lock); - -- return 0; -+ return 0; - } - - int jffs2_unregister_compressor(struct jffs2_compressor *comp) - { -- D2(struct jffs2_compressor *this;) -+ D2(struct jffs2_compressor *this;) -+ -+ D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name)); - -- D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name)); -+ spin_lock(&jffs2_compressor_list_lock); - -- spin_lock(&jffs2_compressor_list_lock); -+ if (comp->usecount) { -+ spin_unlock(&jffs2_compressor_list_lock); -+ printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n"); -+ return -1; -+ } -+ list_del(&comp->list); - -- if (comp->usecount) { -- spin_unlock(&jffs2_compressor_list_lock); -- printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n"); -- return -1; -- } -- list_del(&comp->list); -- -- D2(list_for_each_entry(this, &jffs2_compressor_list, list) { -- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); -- }) -- spin_unlock(&jffs2_compressor_list_lock); -- return 0; -+ D2(list_for_each_entry(this, &jffs2_compressor_list, list) { -+ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); -+ }) -+ spin_unlock(&jffs2_compressor_list_lock); -+ return 0; - } - - void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig) - { -- if (orig != comprbuf) -- kfree(comprbuf); -+ if (orig != comprbuf) -+ kfree(comprbuf); - } - - int __init jffs2_compressors_init(void) - { - /* Registering compressors */ - #ifdef CONFIG_JFFS2_ZLIB -- jffs2_zlib_init(); -+ jffs2_zlib_init(); - #endif - #ifdef CONFIG_JFFS2_RTIME -- jffs2_rtime_init(); -+ jffs2_rtime_init(); - #endif - #ifdef CONFIG_JFFS2_RUBIN -- jffs2_rubinmips_init(); -- jffs2_dynrubin_init(); -+ jffs2_rubinmips_init(); -+ jffs2_dynrubin_init(); - #endif - /* Setting default compression mode */ - #ifdef CONFIG_JFFS2_CMODE_NONE -- jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; -- D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");) -+ jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; -+ D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");) - #else - #ifdef CONFIG_JFFS2_CMODE_SIZE -- jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE; -- D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");) -+ jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE; -+ D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");) - #else -- D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");) -+ D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");) - #endif - #endif -- return 0; -+ return 0; - } - - int jffs2_compressors_exit(void) - { - /* Unregistering compressors */ - #ifdef CONFIG_JFFS2_RUBIN -- jffs2_dynrubin_exit(); -- jffs2_rubinmips_exit(); -+ jffs2_dynrubin_exit(); -+ jffs2_rubinmips_exit(); - #endif - #ifdef CONFIG_JFFS2_RTIME -- jffs2_rtime_exit(); -+ jffs2_rtime_exit(); - #endif - #ifdef CONFIG_JFFS2_ZLIB -- jffs2_zlib_exit(); -+ jffs2_zlib_exit(); - #endif -- return 0; -+ return 0; - } -Index: linux-2.6.23.17/fs/jffs2/compr.h -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/compr.h -+++ linux-2.6.23.17/fs/jffs2/compr.h -@@ -2,7 +2,7 @@ - * JFFS2 -- Journalling Flash File System, Version 2. - * - * Copyright © 2004 Ferenc Havasi , -- * University of Szeged, Hungary -+ * University of Szeged, Hungary - * - * For licensing information, see the file 'LICENCE' in this directory. - * -@@ -32,29 +32,29 @@ - #define JFFS2_ZLIB_PRIORITY 60 - - #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */ --#define JFFS2_DYNRUBIN_DISABLED /* for decompression */ -+#define JFFS2_DYNRUBIN_DISABLED /* for decompression */ - - #define JFFS2_COMPR_MODE_NONE 0 - #define JFFS2_COMPR_MODE_PRIORITY 1 - #define JFFS2_COMPR_MODE_SIZE 2 - - struct jffs2_compressor { -- struct list_head list; -- int priority; /* used by prirority comr. mode */ -- char *name; -- char compr; /* JFFS2_COMPR_XXX */ -- int (*compress)(unsigned char *data_in, unsigned char *cpage_out, -- uint32_t *srclen, uint32_t *destlen, void *model); -- int (*decompress)(unsigned char *cdata_in, unsigned char *data_out, -- uint32_t cdatalen, uint32_t datalen, void *model); -- int usecount; -- int disabled; /* if seted the compressor won't compress */ -- unsigned char *compr_buf; /* used by size compr. mode */ -- uint32_t compr_buf_size; /* used by size compr. mode */ -- uint32_t stat_compr_orig_size; -- uint32_t stat_compr_new_size; -- uint32_t stat_compr_blocks; -- uint32_t stat_decompr_blocks; -+ struct list_head list; -+ int priority; /* used by prirority comr. mode */ -+ char *name; -+ char compr; /* JFFS2_COMPR_XXX */ -+ int (*compress)(unsigned char *data_in, unsigned char *cpage_out, -+ uint32_t *srclen, uint32_t *destlen, void *model); -+ int (*decompress)(unsigned char *cdata_in, unsigned char *data_out, -+ uint32_t cdatalen, uint32_t datalen, void *model); -+ int usecount; -+ int disabled; /* if set the compressor won't compress */ -+ unsigned char *compr_buf; /* used by size compr. mode */ -+ uint32_t compr_buf_size; /* used by size compr. mode */ -+ uint32_t stat_compr_orig_size; -+ uint32_t stat_compr_new_size; -+ uint32_t stat_compr_blocks; -+ uint32_t stat_decompr_blocks; - }; - - int jffs2_register_compressor(struct jffs2_compressor *comp); -@@ -64,12 +64,12 @@ int jffs2_compressors_init(void); - int jffs2_compressors_exit(void); - - uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, -- unsigned char *data_in, unsigned char **cpage_out, -- uint32_t *datalen, uint32_t *cdatalen); -+ unsigned char *data_in, unsigned char **cpage_out, -+ uint32_t *datalen, uint32_t *cdatalen); - - int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, -- uint16_t comprtype, unsigned char *cdata_in, -- unsigned char *data_out, uint32_t cdatalen, uint32_t datalen); -+ uint16_t comprtype, unsigned char *cdata_in, -+ unsigned char *data_out, uint32_t cdatalen, uint32_t datalen); - - void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig); - -Index: linux-2.6.23.17/fs/jffs2/compr_rtime.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/compr_rtime.c -+++ linux-2.6.23.17/fs/jffs2/compr_rtime.c -@@ -104,7 +104,7 @@ static int jffs2_rtime_decompress(unsign - } - } - } -- return 0; -+ return 0; - } - - static struct jffs2_compressor jffs2_rtime_comp = { -Index: linux-2.6.23.17/fs/jffs2/compr_rubin.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/compr_rubin.c -+++ linux-2.6.23.17/fs/jffs2/compr_rubin.c -@@ -384,7 +384,7 @@ static int jffs2_rubinmips_decompress(un - void *model) - { - rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in, cpage_out, sourcelen, dstlen); -- return 0; -+ return 0; - } - - static int jffs2_dynrubin_decompress(unsigned char *data_in, -@@ -399,7 +399,7 @@ static int jffs2_dynrubin_decompress(uns - bits[c] = data_in[c]; - - rubin_do_decompress(256, bits, data_in+8, cpage_out, sourcelen-8, dstlen); -- return 0; -+ return 0; - } - - static struct jffs2_compressor jffs2_rubinmips_comp = { -Index: linux-2.6.23.17/fs/jffs2/compr_zlib.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/compr_zlib.c -+++ linux-2.6.23.17/fs/jffs2/compr_zlib.c -@@ -181,7 +181,7 @@ static int jffs2_zlib_decompress(unsigne - } - zlib_inflateEnd(&inf_strm); - mutex_unlock(&inflate_mutex); -- return 0; -+ return 0; - } - - static struct jffs2_compressor jffs2_zlib_comp = { -@@ -203,11 +203,11 @@ int __init jffs2_zlib_init(void) - - ret = alloc_workspaces(); - if (ret) -- return ret; -+ return ret; - - ret = jffs2_register_compressor(&jffs2_zlib_comp); - if (ret) -- free_workspaces(); -+ free_workspaces(); - - return ret; - } -Index: linux-2.6.23.17/fs/jffs2/dir.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/dir.c -+++ linux-2.6.23.17/fs/jffs2/dir.c -@@ -32,7 +32,7 @@ static int jffs2_mkdir (struct inode *,s - static int jffs2_rmdir (struct inode *,struct dentry *); - static int jffs2_mknod (struct inode *,struct dentry *,int,dev_t); - static int jffs2_rename (struct inode *, struct dentry *, -- struct inode *, struct dentry *); -+ struct inode *, struct dentry *); - - const struct file_operations jffs2_dir_operations = - { -@@ -770,7 +770,7 @@ static int jffs2_mknod (struct inode *di - } - - static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry, -- struct inode *new_dir_i, struct dentry *new_dentry) -+ struct inode *new_dir_i, struct dentry *new_dentry) - { - int ret; - struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb); -Index: linux-2.6.23.17/fs/jffs2/erase.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/erase.c -+++ linux-2.6.23.17/fs/jffs2/erase.c -@@ -38,8 +38,8 @@ static void jffs2_erase_block(struct jff - #ifdef __ECOS - ret = jffs2_flash_erase(c, jeb); - if (!ret) { -- jffs2_erase_succeeded(c, jeb); -- return; -+ jffs2_erase_succeeded(c, jeb); -+ return; - } - bad_offset = jeb->offset; - #else /* Linux */ -@@ -50,12 +50,14 @@ static void jffs2_erase_block(struct jff - instr = kmalloc(sizeof(struct erase_info) + sizeof(struct erase_priv_struct), GFP_KERNEL); - if (!instr) { - printk(KERN_WARNING "kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n"); -+ down(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - list_move(&jeb->list, &c->erase_pending_list); - c->erasing_size -= c->sector_size; - c->dirty_size += c->sector_size; - jeb->dirty_size = c->sector_size; - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - return; - } - -@@ -82,12 +84,14 @@ static void jffs2_erase_block(struct jff - if (ret == -ENOMEM || ret == -EAGAIN) { - /* Erase failed immediately. Refile it on the list */ - D1(printk(KERN_DEBUG "Erase at 0x%08x failed: %d. Refiling on erase_pending_list\n", jeb->offset, ret)); -+ down(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - list_move(&jeb->list, &c->erase_pending_list); - c->erasing_size -= c->sector_size; - c->dirty_size += c->sector_size; - jeb->dirty_size = c->sector_size; - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - return; - } - -@@ -114,6 +118,7 @@ void jffs2_erase_pending_blocks(struct j - jeb = list_entry(c->erase_complete_list.next, struct jffs2_eraseblock, list); - list_del(&jeb->list); - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - jffs2_mark_erased_block(c, jeb); - - if (!--count) { -@@ -134,6 +139,7 @@ void jffs2_erase_pending_blocks(struct j - jffs2_free_jeb_node_refs(c, jeb); - list_add(&jeb->list, &c->erasing_list); - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - - jffs2_erase_block(c, jeb); - -@@ -142,23 +148,25 @@ void jffs2_erase_pending_blocks(struct j - } - - /* Be nice */ -- cond_resched(); -+ yield(); -+ down(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - } - - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - done: - D1(printk(KERN_DEBUG "jffs2_erase_pending_blocks completed\n")); -- -- up(&c->erase_free_sem); - } - - static void jffs2_erase_succeeded(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) - { - D1(printk(KERN_DEBUG "Erase completed successfully at 0x%08x\n", jeb->offset)); -+ down(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - list_move_tail(&jeb->list, &c->erase_complete_list); - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - /* Ensure that kupdated calls us again to mark them clean */ - jffs2_erase_pending_trigger(c); - } -@@ -172,22 +180,26 @@ static void jffs2_erase_failed(struct jf - failed too many times. */ - if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) { - /* We'd like to give this block another try. */ -+ down(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - list_move(&jeb->list, &c->erase_pending_list); - c->erasing_size -= c->sector_size; - c->dirty_size += c->sector_size; - jeb->dirty_size = c->sector_size; - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - return; - } - } - -+ down(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - c->erasing_size -= c->sector_size; - c->bad_size += c->sector_size; - list_move(&jeb->list, &c->bad_list); - c->nr_erasing_blocks--; - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - wake_up(&c->erase_wait); - } - -@@ -317,6 +329,33 @@ static int jffs2_block_check_erase(struc - size_t retlen; - int ret = -EIO; - -+ if (c->mtd->point) { -+ unsigned long *wordebuf; -+ -+ ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size, &retlen, (unsigned char **)&ebuf); -+ if (ret) { -+ D1(printk(KERN_DEBUG "MTD point failed %d\n", ret)); -+ goto do_flash_read; -+ } -+ if (retlen < c->sector_size) { -+ /* Don't muck about if it won't let us point to the whole erase sector */ -+ D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", retlen)); -+ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size); -+ goto do_flash_read; -+ } -+ wordebuf = ebuf-sizeof(*wordebuf); -+ retlen /= sizeof(*wordebuf); -+ do { -+ if (*++wordebuf != ~0) -+ break; -+ } while(--retlen); -+ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size); -+ if (retlen) -+ printk(KERN_WARNING "Newly-erased block contained word 0x%lx at offset 0x%08x\n", -+ *wordebuf, jeb->offset + c->sector_size-retlen*sizeof(*wordebuf)); -+ return 0; -+ } -+ do_flash_read: - ebuf = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!ebuf) { - printk(KERN_WARNING "Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n", jeb->offset); -@@ -417,6 +456,7 @@ static void jffs2_mark_erased_block(stru - jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, c->cleanmarker_size, NULL); - } - -+ down(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - c->erasing_size -= c->sector_size; - c->free_size += jeb->free_size; -@@ -429,23 +469,28 @@ static void jffs2_mark_erased_block(stru - c->nr_erasing_blocks--; - c->nr_free_blocks++; - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - wake_up(&c->erase_wait); - return; - - filebad: -+ down(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - /* Stick it on a list (any list) so erase_failed can take it - right off again. Silly, but shouldn't happen often. */ - list_add(&jeb->list, &c->erasing_list); - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - jffs2_erase_failed(c, jeb, bad_offset); - return; - - refile: - /* Stick it back on the list from whence it came and come back later */ - jffs2_erase_pending_trigger(c); -+ down(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - list_add(&jeb->list, &c->erase_complete_list); - spin_unlock(&c->erase_completion_lock); -+ up(&c->erase_free_sem); - return; - } -Index: linux-2.6.23.17/fs/jffs2/gc.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/gc.c -+++ linux-2.6.23.17/fs/jffs2/gc.c -@@ -556,7 +556,7 @@ static int jffs2_garbage_collect_pristin - - node = kmalloc(rawlen, GFP_KERNEL); - if (!node) -- return -ENOMEM; -+ return -ENOMEM; - - ret = jffs2_flash_read(c, ref_offset(raw), rawlen, &retlen, (char *)node); - if (!ret && retlen != rawlen) -@@ -624,7 +624,7 @@ static int jffs2_garbage_collect_pristin - - if (ret || (retlen != rawlen)) { - printk(KERN_NOTICE "Write of %d bytes at 0x%08x failed. returned %d, retlen %zd\n", -- rawlen, phys_ofs, ret, retlen); -+ rawlen, phys_ofs, ret, retlen); - if (retlen) { - jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, rawlen, NULL); - } else { -Index: linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/jffs2_fs_sb.h -+++ linux-2.6.23.17/fs/jffs2/jffs2_fs_sb.h -@@ -106,6 +106,9 @@ struct jffs2_sb_info { - - uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */ - -+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY -+ unsigned char *wbuf_verify; /* read-back buffer for verification */ -+#endif - #ifdef CONFIG_JFFS2_FS_WRITEBUFFER - unsigned char *wbuf; /* Write-behind buffer for NAND flash */ - uint32_t wbuf_ofs; -Index: linux-2.6.23.17/fs/jffs2/nodelist.h -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/nodelist.h -+++ linux-2.6.23.17/fs/jffs2/nodelist.h -@@ -127,7 +127,7 @@ static inline struct jffs2_inode_cache * - return ((struct jffs2_inode_cache *)raw); - } - -- /* flash_offset & 3 always has to be zero, because nodes are -+ /* flash_offset & 3 always has to be zero, because nodes are - always aligned at 4 bytes. So we have a couple of extra bits - to play with, which indicate the node's status; see below: */ - #define REF_UNCHECKED 0 /* We haven't yet checked the CRC or built its inode */ -@@ -197,7 +197,7 @@ struct jffs2_inode_cache { - #define RAWNODE_CLASS_XATTR_DATUM 1 - #define RAWNODE_CLASS_XATTR_REF 2 - --#define INOCACHE_HASHSIZE 128 -+#define INOCACHE_HASHSIZE 1024 - - #define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size) - -Index: linux-2.6.23.17/fs/jffs2/nodemgmt.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/nodemgmt.c -+++ linux-2.6.23.17/fs/jffs2/nodemgmt.c -@@ -154,7 +154,7 @@ int jffs2_reserve_space_gc(struct jffs2_ - while(ret == -EAGAIN) { - ret = jffs2_do_reserve_space(c, minsize, len, sumsize); - if (ret) { -- D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret)); -+ D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret)); - } - } - spin_unlock(&c->erase_completion_lock); -@@ -423,7 +423,12 @@ struct jffs2_raw_node_ref *jffs2_add_phy - even after refiling c->nextblock */ - if ((c->nextblock || ((ofs & 3) != REF_OBSOLETE)) - && (jeb != c->nextblock || (ofs & ~3) != jeb->offset + (c->sector_size - jeb->free_size))) { -- printk(KERN_WARNING "argh. node added in wrong place\n"); -+ printk(KERN_WARNING "argh. node added in wrong place at 0x%08x(%d)\n", ofs & ~3, ofs & 3); -+ if (c->nextblock) -+ printk(KERN_WARNING "nextblock 0x%08x", c->nextblock->offset); -+ else -+ printk(KERN_WARNING "No nextblock"); -+ printk(", expected at %08x\n", jeb->offset + (c->sector_size - jeb->free_size)); - return ERR_PTR(-EINVAL); - } - #endif -Index: linux-2.6.23.17/fs/jffs2/readinode.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/readinode.c -+++ linux-2.6.23.17/fs/jffs2/readinode.c -@@ -211,7 +211,7 @@ static void jffs2_kill_tn(struct jffs2_s - * ordering. - * - * Returns 0 if the node was handled (including marking it obsolete) -- * < 0 an if error occurred -+ * < 0 an if error occurred - */ - static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, - struct jffs2_readinode_info *rii, -@@ -862,8 +862,8 @@ static inline int read_unknown(struct jf - JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n", - ref_offset(ref)); - JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n", -- je16_to_cpu(un->magic), je16_to_cpu(un->nodetype), -- je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc)); -+ je16_to_cpu(un->magic), je16_to_cpu(un->nodetype), -+ je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc)); - jffs2_mark_node_obsolete(c, ref); - return 0; - } -Index: linux-2.6.23.17/fs/jffs2/scan.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/scan.c -+++ linux-2.6.23.17/fs/jffs2/scan.c -@@ -877,7 +877,7 @@ scan_more: - switch (je16_to_cpu(node->nodetype) & JFFS2_COMPAT_MASK) { - case JFFS2_FEATURE_ROCOMPAT: - printk(KERN_NOTICE "Read-only compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs); -- c->flags |= JFFS2_SB_FLAG_RO; -+ c->flags |= JFFS2_SB_FLAG_RO; - if (!(jffs2_is_readonly(c))) - return -EROFS; - if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen))))) -Index: linux-2.6.23.17/fs/jffs2/security.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/security.c -+++ linux-2.6.23.17/fs/jffs2/security.c -@@ -38,9 +38,9 @@ int jffs2_init_security(struct inode *in - } - rc = do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, value, len, 0); - -- kfree(name); -- kfree(value); -- return rc; -+ kfree(name); -+ kfree(value); -+ return rc; - } - - /* ---- XATTR Handler for "security.*" ----------------- */ -Index: linux-2.6.23.17/fs/jffs2/summary.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/summary.c -+++ linux-2.6.23.17/fs/jffs2/summary.c -@@ -2,10 +2,10 @@ - * JFFS2 -- Journalling Flash File System, Version 2. - * - * Copyright © 2004 Ferenc Havasi , -- * Zoltan Sogor , -- * Patrik Kluba , -- * University of Szeged, Hungary -- * 2006 KaiGai Kohei -+ * Zoltan Sogor , -+ * Patrik Kluba , -+ * University of Szeged, Hungary -+ * 2006 KaiGai Kohei - * - * For licensing information, see the file 'LICENCE' in this directory. - * -Index: linux-2.6.23.17/fs/jffs2/summary.h -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/summary.h -+++ linux-2.6.23.17/fs/jffs2/summary.h -@@ -2,9 +2,9 @@ - * JFFS2 -- Journalling Flash File System, Version 2. - * - * Copyright © 2004 Ferenc Havasi , -- * Zoltan Sogor , -- * Patrik Kluba , -- * University of Szeged, Hungary -+ * Zoltan Sogor , -+ * Patrik Kluba , -+ * University of Szeged, Hungary - * - * For licensing information, see the file 'LICENCE' in this directory. - * -Index: linux-2.6.23.17/fs/jffs2/wbuf.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/wbuf.c -+++ linux-2.6.23.17/fs/jffs2/wbuf.c -@@ -220,6 +220,47 @@ static struct jffs2_raw_node_ref **jffs2 - return NULL; - } - -+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY -+static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf, -+ uint32_t ofs) -+{ -+ int ret; -+ size_t retlen; -+ char *eccstr; -+ -+ ret = c->mtd->read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify); -+ if (ret && ret != -EUCLEAN && ret != -EBADMSG) { -+ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x failed: %d\n", c->wbuf_ofs, ret); -+ return ret; -+ } else if (retlen != c->wbuf_pagesize) { -+ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x gave short read: %zd not %d.\n", ofs, retlen, c->wbuf_pagesize); -+ return -EIO; -+ } -+ if (!memcmp(buf, c->wbuf_verify, c->wbuf_pagesize)) -+ return 0; -+ -+ if (ret == -EUCLEAN) -+ eccstr = "corrected"; -+ else if (ret == -EBADMSG) -+ eccstr = "correction failed"; -+ else -+ eccstr = "OK or unused"; -+ -+ printk(KERN_WARNING "Write verify error (ECC %s) at %08x. Wrote:\n", -+ eccstr, c->wbuf_ofs); -+ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1, -+ c->wbuf, c->wbuf_pagesize, 0); -+ -+ printk(KERN_WARNING "Read back:\n"); -+ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1, -+ c->wbuf_verify, c->wbuf_pagesize, 0); -+ -+ return -EIO; -+} -+#else -+#define jffs2_verify_write(c,b,o) (0) -+#endif -+ - /* Recover from failure to write wbuf. Recover the nodes up to the - * wbuf, not the one which we were starting to try to write. */ - -@@ -380,7 +421,7 @@ static void jffs2_wbuf_recover(struct jf - ret = c->mtd->write(c->mtd, ofs, towrite, &retlen, - rewrite_buf); - -- if (ret || retlen != towrite) { -+ if (ret || retlen != towrite || jffs2_verify_write(c, rewrite_buf, ofs)) { - /* Argh. We tried. Really we did. */ - printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n"); - kfree(buf); -@@ -587,15 +628,16 @@ static int __jffs2_flush_wbuf(struct jff - - ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf); - -- if (ret || retlen != c->wbuf_pagesize) { -- if (ret) -- printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n",ret); -- else { -- printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n", -- retlen, c->wbuf_pagesize); -- ret = -EIO; -- } -- -+ if (ret) { -+ printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n", ret); -+ goto wfail; -+ } else if (retlen != c->wbuf_pagesize) { -+ printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n", -+ retlen, c->wbuf_pagesize); -+ ret = -EIO; -+ goto wfail; -+ } else if ((ret = jffs2_verify_write(c, c->wbuf, c->wbuf_ofs))) { -+ wfail: - jffs2_wbuf_recover(c); - - return ret; -@@ -966,8 +1008,8 @@ exit: - - #define NR_OOB_SCAN_PAGES 4 - --/* For historical reasons we use only 12 bytes for OOB clean marker */ --#define OOB_CM_SIZE 12 -+/* For historical reasons we use only 8 bytes for OOB clean marker */ -+#define OOB_CM_SIZE 8 - - static const struct jffs2_unknown_node oob_cleanmarker = - { -@@ -1021,8 +1063,8 @@ int jffs2_check_oob_empty(struct jffs2_s - /* - * Check for a valid cleanmarker. - * Returns: 0 if a valid cleanmarker was found -- * 1 if no cleanmarker was found -- * negative error code if an error occurred -+ * 1 if no cleanmarker was found -+ * negative error code if an error occurred - */ - int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c, - struct jffs2_eraseblock *jeb) -@@ -1138,11 +1180,22 @@ int jffs2_nand_flash_setup(struct jffs2_ - return -ENOMEM; - } - -+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY -+ c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL); -+ if (!c->wbuf_verify) { -+ kfree(c->oobbuf); -+ kfree(c->wbuf); -+ return -ENOMEM; -+ } -+#endif - return 0; - } - - void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c) - { -+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY -+ kfree(c->wbuf_verify); -+#endif - kfree(c->wbuf); - kfree(c->oobbuf); - } -Index: linux-2.6.23.17/fs/jffs2/xattr.h -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/xattr.h -+++ linux-2.6.23.17/fs/jffs2/xattr.h -@@ -75,7 +75,7 @@ extern void jffs2_build_xattr_subsystem( - extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c); - - extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c, -- uint32_t xid, uint32_t version); -+ uint32_t xid, uint32_t version); - - extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic); - extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic); -Index: linux-2.6.23.17/fs/jffs2/xattr_user.c -=================================================================== ---- linux-2.6.23.17.orig/fs/jffs2/xattr_user.c -+++ linux-2.6.23.17/fs/jffs2/xattr_user.c -@@ -17,7 +17,7 @@ - #include "nodelist.h" - - static int jffs2_user_getxattr(struct inode *inode, const char *name, -- void *buffer, size_t size) -+ void *buffer, size_t size) - { - if (!strcmp(name, "")) - return -EINVAL; -@@ -25,7 +25,7 @@ static int jffs2_user_getxattr(struct in - } - - static int jffs2_user_setxattr(struct inode *inode, const char *name, const void *buffer, -- size_t size, int flags) -+ size_t size, int flags) - { - if (!strcmp(name, "")) - return -EINVAL; -Index: linux-2.6.23.17/include/asm-i386/geode.h -=================================================================== ---- linux-2.6.23.17.orig/include/asm-i386/geode.h -+++ linux-2.6.23.17/include/asm-i386/geode.h -@@ -135,6 +135,55 @@ static inline void geode_gpio_event_pme( - geode_gpio_setup_event(gpio, pair, 1); - } - -+/* MFGPT */ -+ -+#define MFGPT_TIMER_ANY -1 -+ -+#define MFGPT_DOMAIN_WORKING 1 -+#define MFGPT_DOMAIN_STANDBY 2 -+#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY) -+ -+#define MFGPT_CMP1 0 -+#define MFGPT_CMP2 1 -+ -+#define MFGPT_EVENT_IRQ 0 -+#define MFGPT_EVENT_NMI 1 -+#define MFGPT_EVENT_RESET 3 -+ -+#define MFGPT_REG_CMP1 0 -+#define MFGPT_REG_CMP2 2 -+#define MFGPT_REG_COUNTER 4 -+#define MFGPT_REG_SETUP 6 -+ -+#define MFGPT_SETUP_CNTEN (1 << 15) -+#define MFGPT_SETUP_CMP2 (1 << 14) -+#define MFGPT_SETUP_CMP1 (1 << 13) -+#define MFGPT_SETUP_SETUP (1 << 12) -+#define MFGPT_SETUP_STOPEN (1 << 11) -+#define MFGPT_SETUP_EXTEN (1 << 10) -+#define MFGPT_SETUP_REVEN (1 << 5) -+#define MFGPT_SETUP_CLKSEL (1 << 4) -+ -+static inline void geode_mfgpt_write(int timer, u16 reg, u16 value) -+{ -+ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); -+ outw(value, base + reg + (timer * 8)); -+} -+ -+static inline u16 geode_mfgpt_read(int timer, u16 reg) -+{ -+ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); -+ return inw(base + reg + (timer * 8)); -+} -+ -+extern int __init geode_mfgpt_detect(void); -+extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable); -+extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable); -+extern int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner); -+ -+#define geode_mfgpt_setup_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),1) -+#define geode_mfgpt_release_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),0) -+ - /* Specific geode tests */ - - static inline int is_geode_gx(void) -Index: linux-2.6.23.17/include/asm-i386/setup.h -=================================================================== ---- linux-2.6.23.17.orig/include/asm-i386/setup.h -+++ linux-2.6.23.17/include/asm-i386/setup.h -@@ -24,6 +24,7 @@ - #define OLD_CL_BASE_ADDR 0x90000 - #define OLD_CL_OFFSET 0x90022 - #define NEW_CL_POINTER 0x228 /* Relative to real mode data */ -+#define OFW_INFO_OFFSET 0xb0 /* Relative to real mode data */ - - #ifndef __ASSEMBLY__ - -Index: linux-2.6.23.17/include/linux/console.h -=================================================================== ---- linux-2.6.23.17.orig/include/linux/console.h -+++ linux-2.6.23.17/include/linux/console.h -@@ -121,14 +121,11 @@ extern void console_stop(struct console - extern void console_start(struct console *); - extern int is_console_locked(void); - --#ifndef CONFIG_DISABLE_CONSOLE_SUSPEND -+extern int serial_console_suspend_enabled; -+ - /* Suspend and resume console messages over PM events */ - extern void suspend_console(void); - extern void resume_console(void); --#else --static inline void suspend_console(void) {} --static inline void resume_console(void) {} --#endif /* CONFIG_DISABLE_CONSOLE_SUSPEND */ - - int mda_console_init(void); - void prom_con_init(void); -Index: linux-2.6.23.17/include/linux/fb.h -=================================================================== ---- linux-2.6.23.17.orig/include/linux/fb.h -+++ linux-2.6.23.17/include/linux/fb.h -@@ -664,6 +664,12 @@ struct fb_ops { - /* restore saved state */ - void (*fb_restore_state)(struct fb_info *info); - -+ /* Shut down the graphics engine to save power */ -+ int (*fb_powerdown)(struct fb_info *info); -+ -+ /* Power it back up */ -+ int (*fb_powerup)(struct fb_info *info); -+ - /* get capability given var */ - void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps, - struct fb_var_screeninfo *var); -@@ -943,6 +949,9 @@ extern int fb_get_color_depth(struct fb_ - extern int fb_get_options(char *name, char **option); - extern int fb_new_modelist(struct fb_info *info); - -+extern int fb_powerdown(struct fb_info *info); -+extern int fb_powerup(struct fb_info *info); -+ - extern struct fb_info *registered_fb[FB_MAX]; - extern int num_registered_fb; - extern struct class *fb_class; -Index: linux-2.6.23.17/include/linux/mtd/onenand.h -=================================================================== ---- linux-2.6.23.17.orig/include/linux/mtd/onenand.h -+++ linux-2.6.23.17/include/linux/mtd/onenand.h -@@ -60,6 +60,7 @@ struct onenand_bufferram { - * @erase_shift: [INTERN] number of address bits in a block - * @page_shift: [INTERN] number of address bits in a page - * @page_mask: [INTERN] a page per block mask -+ * @writesize: [INTERN] a real page size - * @bufferram_index: [INTERN] BufferRAM index - * @bufferram: [INTERN] BufferRAM info - * @readw: [REPLACEABLE] hardware specific function for read short -@@ -100,6 +101,7 @@ struct onenand_chip { - unsigned int erase_shift; - unsigned int page_shift; - unsigned int page_mask; -+ unsigned int writesize; - - unsigned int bufferram_index; - struct onenand_bufferram bufferram[MAX_BUFFERRAM]; -@@ -140,6 +142,8 @@ struct onenand_chip { - #define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) - #define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) - #define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1) -+#define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0) -+#define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1) - - #define ONENAND_GET_SYS_CFG1(this) \ - (this->read_word(this->base + ONENAND_REG_SYS_CFG1)) -@@ -149,6 +153,13 @@ struct onenand_chip { - #define ONENAND_IS_DDP(this) \ - (this->device_id & ONENAND_DEVICE_IS_DDP) - -+#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM -+#define ONENAND_IS_2PLANE(this) \ -+ (this->options & ONENAND_HAS_2PLANE) -+#else -+#define ONENAND_IS_2PLANE(this) (0) -+#endif -+ - /* Check byte access in OneNAND */ - #define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1) - -@@ -157,6 +168,7 @@ struct onenand_chip { - */ - #define ONENAND_HAS_CONT_LOCK (0x0001) - #define ONENAND_HAS_UNLOCK_ALL (0x0002) -+#define ONENAND_HAS_2PLANE (0x0004) - #define ONENAND_PAGEBUF_ALLOC (0x1000) - #define ONENAND_OOBBUF_ALLOC (0x2000) - -Index: linux-2.6.23.17/include/linux/mtd/onenand_regs.h -=================================================================== ---- linux-2.6.23.17.orig/include/linux/mtd/onenand_regs.h -+++ linux-2.6.23.17/include/linux/mtd/onenand_regs.h -@@ -74,6 +74,8 @@ - - #define ONENAND_DEVICE_DENSITY_512Mb (0x002) - #define ONENAND_DEVICE_DENSITY_1Gb (0x003) -+#define ONENAND_DEVICE_DENSITY_2Gb (0x004) -+#define ONENAND_DEVICE_DENSITY_4Gb (0x005) - - /* - * Version ID Register F002h (R) -@@ -111,6 +113,8 @@ - #define ONENAND_CMD_READOOB (0x13) - #define ONENAND_CMD_PROG (0x80) - #define ONENAND_CMD_PROGOOB (0x1A) -+#define ONENAND_CMD_2X_PROG (0x7D) -+#define ONENAND_CMD_2X_CACHE_PROG (0x7F) - #define ONENAND_CMD_UNLOCK (0x23) - #define ONENAND_CMD_LOCK (0x2A) - #define ONENAND_CMD_LOCK_TIGHT (0x2C) -Index: linux-2.6.23.17/include/linux/vt_kern.h -=================================================================== ---- linux-2.6.23.17.orig/include/linux/vt_kern.h -+++ linux-2.6.23.17/include/linux/vt_kern.h -@@ -95,4 +95,23 @@ struct vt_spawn_console { - }; - extern struct vt_spawn_console vt_spawn_con; - -+/* A notifier list for console events */ -+extern struct raw_notifier_head console_notifier_list; -+ -+/* Called when the FG console switches to KD_TEXT mode */ -+#define CONSOLE_EVENT_SWITCH_TEXT 0x01 -+ -+/* Called when the FG console switches to KD_GRAPHICS mode */ -+#define CONSOLE_EVENT_SWITCH_GRAPHICS 0x02 -+ -+static inline int console_event_register(struct notifier_block *n) -+{ -+ return raw_notifier_chain_register(&console_notifier_list, n); -+} -+ -+static inline int console_event_unregister(struct notifier_block *n) -+{ -+ return raw_notifier_chain_unregister(&console_notifier_list, n); -+} -+ - #endif /* _VT_KERN_H */ -Index: linux-2.6.23.17/kernel/power/console.c -=================================================================== ---- linux-2.6.23.17.orig/kernel/power/console.c -+++ linux-2.6.23.17/kernel/power/console.c -@@ -9,7 +9,7 @@ - #include - #include "power.h" - --#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) -+#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) && !defined(CONFIG_DISABLE_SUSPEND_VT_SWITCH) - #define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1) - - static int orig_fgconsole, orig_kmsg; diff --git a/target/linux/olpc/patches/110-olpc_sound.patch b/target/linux/olpc/patches/110-olpc_sound.patch deleted file mode 100644 index c322e46f53..0000000000 --- a/target/linux/olpc/patches/110-olpc_sound.patch +++ /dev/null @@ -1,414 +0,0 @@ -Index: linux-2.6.23.17/include/sound/ac97_codec.h -=================================================================== ---- linux-2.6.23.17.orig/include/sound/ac97_codec.h -+++ linux-2.6.23.17/include/sound/ac97_codec.h -@@ -281,10 +281,12 @@ - /* specific - Analog Devices */ - #define AC97_AD_TEST 0x5a /* test register */ - #define AC97_AD_TEST2 0x5c /* undocumented test register 2 */ -+#define AC97_AD_HPFD_SHIFT 12 /* High Pass Filter Disable */ - #define AC97_AD_CODEC_CFG 0x70 /* codec configuration */ - #define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */ - #define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */ - #define AC97_AD_MISC 0x76 /* Misc Control Bits */ -+#define AC97_AD_VREFD_SHIFT 2 /* V_REFOUT Disable (AD1888) */ - - /* specific - Cirrus Logic */ - #define AC97_CSR_ACMODE 0x5e /* AC Mode Register */ -Index: linux-2.6.23.17/sound/pci/ac97/ac97_codec.c -=================================================================== ---- linux-2.6.23.17.orig/sound/pci/ac97/ac97_codec.c -+++ linux-2.6.23.17/sound/pci/ac97/ac97_codec.c -@@ -49,7 +49,7 @@ module_param(enable_loopback, bool, 0444 - MODULE_PARM_DESC(enable_loopback, "Enable AC97 ADC/DAC Loopback Control"); - - #ifdef CONFIG_SND_AC97_POWER_SAVE --static int power_save; -+static int power_save = 1; - module_param(power_save, bool, 0644); - MODULE_PARM_DESC(power_save, "Enable AC97 power-saving control"); - #endif -Index: linux-2.6.23.17/sound/pci/ac97/ac97_patch.c -=================================================================== ---- linux-2.6.23.17.orig/sound/pci/ac97/ac97_patch.c -+++ linux-2.6.23.17/sound/pci/ac97/ac97_patch.c -@@ -1973,8 +1973,9 @@ static const struct snd_kcontrol_new snd - .get = snd_ac97_ad1888_lohpsel_get, - .put = snd_ac97_ad1888_lohpsel_put - }, -- AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1), -- AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1), -+ AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1), -+ AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, -+ AC97_AD_HPFD_SHIFT, 1, 1), - AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -Index: linux-2.6.23.17/sound/pci/cs5535audio/Makefile -=================================================================== ---- linux-2.6.23.17.orig/sound/pci/cs5535audio/Makefile -+++ linux-2.6.23.17/sound/pci/cs5535audio/Makefile -@@ -8,5 +8,9 @@ ifeq ($(CONFIG_PM),y) - snd-cs5535audio-objs += cs5535audio_pm.o - endif - -+ifdef CONFIG_OLPC -+snd-cs5535audio-objs += cs5535audio_olpc.o -+endif -+ - # Toplevel Module Dependency - obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o -Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.c -=================================================================== ---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio.c -+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.c -@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac - return snd_cs5535audio_codec_read(cs5535au, reg); - } - --static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au) -+static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au) - { - struct snd_card *card = cs5535au->card; - struct snd_ac97_bus *pbus; -@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct - return err; - - memset(&ac97, 0, sizeof(ac97)); -- ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM; -+ ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM -+ | AC97_SCAP_POWER_SAVE; - ac97.private_data = cs5535au; - ac97.pci = cs5535au->pci; - -+ /* olpc_prequirks is dummied out if not olpc */ -+ olpc_prequirks(card, &ac97); -+ - if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) { - snd_printk(KERN_ERR "mixer failed\n"); - return err; -@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct - - snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk); - -+ /* olpc_quirks is dummied out if not olpc */ -+ if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) { -+ snd_printk(KERN_ERR "olpc quirks failed\n"); -+ return err; -+ } -+ - return 0; - } - -@@ -206,7 +216,6 @@ static void process_bm1_irq(struct cs553 - static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id) - { - u16 acc_irq_stat; -- u8 bm_stat; - unsigned char count; - struct cs5535audio *cs5535au = dev_id; - -@@ -217,7 +226,7 @@ static irqreturn_t snd_cs5535audio_inter - - if (!acc_irq_stat) - return IRQ_NONE; -- for (count = 0; count < 10; count++) { -+ for (count = 0; count < 4; count++) { - if (acc_irq_stat & (1 << count)) { - switch (count) { - case IRQ_STS: -@@ -232,26 +241,9 @@ static irqreturn_t snd_cs5535audio_inter - case BM1_IRQ_STS: - process_bm1_irq(cs5535au); - break; -- case BM2_IRQ_STS: -- bm_stat = cs_readb(cs5535au, ACC_BM2_STATUS); -- break; -- case BM3_IRQ_STS: -- bm_stat = cs_readb(cs5535au, ACC_BM3_STATUS); -- break; -- case BM4_IRQ_STS: -- bm_stat = cs_readb(cs5535au, ACC_BM4_STATUS); -- break; -- case BM5_IRQ_STS: -- bm_stat = cs_readb(cs5535au, ACC_BM5_STATUS); -- break; -- case BM6_IRQ_STS: -- bm_stat = cs_readb(cs5535au, ACC_BM6_STATUS); -- break; -- case BM7_IRQ_STS: -- bm_stat = cs_readb(cs5535au, ACC_BM7_STATUS); -- break; - default: -- snd_printk(KERN_ERR "Unexpected irq src\n"); -+ snd_printk(KERN_ERR "Unexpected irq src: " -+ "0x%x\n", acc_irq_stat); - break; - } - } -Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.h -=================================================================== ---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio.h -+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio.h -@@ -16,57 +16,28 @@ - #define ACC_IRQ_STATUS 0x12 - #define ACC_BM0_CMD 0x20 - #define ACC_BM1_CMD 0x28 --#define ACC_BM2_CMD 0x30 --#define ACC_BM3_CMD 0x38 --#define ACC_BM4_CMD 0x40 --#define ACC_BM5_CMD 0x48 --#define ACC_BM6_CMD 0x50 --#define ACC_BM7_CMD 0x58 - #define ACC_BM0_PRD 0x24 - #define ACC_BM1_PRD 0x2C --#define ACC_BM2_PRD 0x34 --#define ACC_BM3_PRD 0x3C --#define ACC_BM4_PRD 0x44 --#define ACC_BM5_PRD 0x4C --#define ACC_BM6_PRD 0x54 --#define ACC_BM7_PRD 0x5C - #define ACC_BM0_STATUS 0x21 - #define ACC_BM1_STATUS 0x29 --#define ACC_BM2_STATUS 0x31 --#define ACC_BM3_STATUS 0x39 --#define ACC_BM4_STATUS 0x41 --#define ACC_BM5_STATUS 0x49 --#define ACC_BM6_STATUS 0x51 --#define ACC_BM7_STATUS 0x59 - #define ACC_BM0_PNTR 0x60 - #define ACC_BM1_PNTR 0x64 --#define ACC_BM2_PNTR 0x68 --#define ACC_BM3_PNTR 0x6C --#define ACC_BM4_PNTR 0x70 --#define ACC_BM5_PNTR 0x74 --#define ACC_BM6_PNTR 0x78 --#define ACC_BM7_PNTR 0x7C -+ - /* acc_codec bar0 reg bits */ - /* ACC_IRQ_STATUS */ - #define IRQ_STS 0 - #define WU_IRQ_STS 1 - #define BM0_IRQ_STS 2 - #define BM1_IRQ_STS 3 --#define BM2_IRQ_STS 4 --#define BM3_IRQ_STS 5 --#define BM4_IRQ_STS 6 --#define BM5_IRQ_STS 7 --#define BM6_IRQ_STS 8 --#define BM7_IRQ_STS 9 - /* ACC_BMX_STATUS */ - #define EOP (1<<0) - #define BM_EOP_ERR (1<<1) - /* ACC_BMX_CTL */ --#define BM_CTL_EN 0x00000001 --#define BM_CTL_PAUSE 0x00000011 --#define BM_CTL_DIS 0x00000000 --#define BM_CTL_BYTE_ORD_LE 0x00000000 --#define BM_CTL_BYTE_ORD_BE 0x00000100 -+#define BM_CTL_EN 0x01 -+#define BM_CTL_PAUSE 0x03 -+#define BM_CTL_DIS 0x00 -+#define BM_CTL_BYTE_ORD_LE 0x00 -+#define BM_CTL_BYTE_ORD_BE 0x04 - /* cs5535 specific ac97 codec register defines */ - #define CMD_MASK 0xFF00FFFF - #define CMD_NEW 0x00010000 -@@ -106,8 +77,8 @@ struct cs5535audio_dma { - struct snd_pcm_substream *substream; - unsigned int buf_addr, buf_bytes; - unsigned int period_bytes, periods; -- int suspended; - u32 saved_prd; -+ int pcm_open_flag; - }; - - struct cs5535audio { -@@ -123,8 +94,21 @@ struct cs5535audio { - struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS]; - }; - -+#ifdef CONFIG_PM - int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state); - int snd_cs5535audio_resume(struct pci_dev *pci); -+#endif -+ -+#ifdef CONFIG_OLPC -+void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit; -+int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit; -+int olpc_ai_enable(struct snd_ac97 *ac97, u8 val); -+#else -+#define olpc_prequirks(arg,arg2) do {} while (0) -+#define olpc_quirks(arg,arg2) (0) -+#define olpc_ai_enable(a, v) (0) -+#endif -+ - int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio); - - #endif /* __SOUND_CS5535AUDIO_H */ -Index: linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pcm.c -=================================================================== ---- linux-2.6.23.17.orig/sound/pci/cs5535audio/cs5535audio_pcm.c -+++ linux-2.6.23.17/sound/pci/cs5535audio/cs5535audio_pcm.c -@@ -164,6 +164,7 @@ static int cs5535audio_build_dma_packets - jmpprd_addr = cpu_to_le32(lastdesc->addr + - (sizeof(struct cs5535audio_dma_desc)*periods)); - -+ dma->substream = substream; - dma->period_bytes = period_bytes; - dma->periods = periods; - spin_lock_irq(&cs5535au->reg_lock); -@@ -241,6 +242,7 @@ static void cs5535audio_clear_dma_packet - { - snd_dma_free_pages(&dma->desc_buf); - dma->desc_buf.area = NULL; -+ dma->substream = NULL; - } - - static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream, -@@ -260,6 +262,9 @@ static int snd_cs5535audio_hw_params(str - err = cs5535audio_build_dma_packets(cs5535au, dma, substream, - params_periods(hw_params), - params_period_bytes(hw_params)); -+ if (!err) -+ dma->pcm_open_flag = 1; -+ - return err; - } - -@@ -268,6 +273,15 @@ static int snd_cs5535audio_hw_free(struc - struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream); - struct cs5535audio_dma *dma = substream->runtime->private_data; - -+ if (dma->pcm_open_flag) { -+ if (substream == cs5535au->playback_substream) -+ snd_ac97_update_power(cs5535au->ac97, -+ AC97_PCM_FRONT_DAC_RATE, 0); -+ else -+ snd_ac97_update_power(cs5535au->ac97, -+ AC97_PCM_LR_ADC_RATE, 0); -+ dma->pcm_open_flag = 0; -+ } - cs5535audio_clear_dma_packets(cs5535au, dma, substream); - return snd_pcm_lib_free_pages(substream); - } -@@ -298,14 +312,12 @@ static int snd_cs5535audio_trigger(struc - break; - case SNDRV_PCM_TRIGGER_RESUME: - dma->ops->enable_dma(cs5535au); -- dma->suspended = 0; - break; - case SNDRV_PCM_TRIGGER_STOP: - dma->ops->disable_dma(cs5535au); - break; - case SNDRV_PCM_TRIGGER_SUSPEND: - dma->ops->disable_dma(cs5535au); -- dma->suspended = 1; - break; - default: - snd_printk(KERN_ERR "unhandled trigger\n"); -@@ -344,6 +356,7 @@ static int snd_cs5535audio_capture_open( - int err; - struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; -+ struct snd_ac97 *ac97 = cs5535au->ac97; - - runtime->hw = snd_cs5535audio_capture; - cs5535au->capture_substream = substream; -@@ -352,11 +365,29 @@ static int snd_cs5535audio_capture_open( - if ((err = snd_pcm_hw_constraint_integer(runtime, - SNDRV_PCM_HW_PARAM_PERIODS)) < 0) - return err; -- return 0; -+ -+#ifdef CONFIG_OLPC -+ /* Disable Analog Input */ -+ olpc_ai_enable(ac97, 0); -+ /* Enable V_ref bias while recording. */ -+ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<ac97; -+ -+ /* Disable Analog Input */ -+ olpc_ai_enable(ac97, 0); -+ /* Disable V_ref bias. */ -+ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<pcm); -+ snd_ac97_suspend(cs5535au->ac97); - for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) { - struct cs5535audio_dma *dma = &cs5535au->dmas[i]; -- if (dma && dma->substream && !dma->suspended) -+ if (dma && dma->substream) - dma->saved_prd = dma->ops->read_prd(cs5535au); - } -- snd_pcm_suspend_all(cs5535au->pcm); -- snd_ac97_suspend(cs5535au->ac97); - /* save important regs, then disable aclink in hw */ - snd_cs5535audio_stop_hardware(cs5535au); - -+ if (pci_save_state(pci)) { -+ printk(KERN_ERR "cs5535audio: pci_save_state failed!\n"); -+ return -EIO; -+ } - pci_disable_device(pci); -- pci_save_state(pci); - pci_set_power_state(pci, pci_choose_state(pci, state)); - return 0; - } -@@ -89,7 +92,12 @@ int snd_cs5535audio_resume(struct pci_de - int i; - - pci_set_power_state(pci, PCI_D0); -- pci_restore_state(pci); -+ if (pci_restore_state(pci) < 0) { -+ printk(KERN_ERR "cs5535audio: pci_restore_state failed, " -+ "disabling device\n"); -+ snd_card_disconnect(card); -+ return -EIO; -+ } - if (pci_enable_device(pci) < 0) { - printk(KERN_ERR "cs5535audio: pci_enable_device failed, " - "disabling device\n"); -@@ -112,17 +120,17 @@ int snd_cs5535audio_resume(struct pci_de - if (!timeout) - snd_printk(KERN_ERR "Failure getting AC Link ready\n"); - -- /* we depend on ac97 to perform the codec power up */ -- snd_ac97_resume(cs5535au->ac97); - /* set up rate regs, dma. actual initiation is done in trig */ - for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) { - struct cs5535audio_dma *dma = &cs5535au->dmas[i]; -- if (dma && dma->substream && dma->suspended) { -+ if (dma && dma->substream) { - dma->substream->ops->prepare(dma->substream); - dma->ops->setup_prd(cs5535au, dma->saved_prd); - } - } -- -+ -+ /* we depend on ac97 to perform the codec power up */ -+ snd_ac97_resume(cs5535au->ac97); - snd_power_change_state(card, SNDRV_CTL_POWER_D0); - - return 0; diff --git a/target/linux/olpc/patches/200-fix_dcon_id.patch b/target/linux/olpc/patches/200-fix_dcon_id.patch deleted file mode 100644 index 73860f9b84..0000000000 --- a/target/linux/olpc/patches/200-fix_dcon_id.patch +++ /dev/null @@ -1,12 +0,0 @@ -Index: linux-2.6.23.17/include/linux/i2c-id.h -=================================================================== ---- linux-2.6.23.17.orig/include/linux/i2c-id.h -+++ linux-2.6.23.17/include/linux/i2c-id.h -@@ -119,6 +119,7 @@ - #define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */ - #define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */ - #define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */ -+#define I2C_DRIVERID_DCON 93 - - #define I2C_DRIVERID_I2CDEV 900 - #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */ diff --git a/target/linux/olpc/patches/300-block2mtd_init.patch b/target/linux/olpc/patches/300-block2mtd_init.patch deleted file mode 100644 index a922b4e2a9..0000000000 --- a/target/linux/olpc/patches/300-block2mtd_init.patch +++ /dev/null @@ -1,235 +0,0 @@ -Index: linux-2.6.23.17/drivers/mtd/devices/block2mtd.c -=================================================================== ---- linux-2.6.23.17.orig/drivers/mtd/devices/block2mtd.c -+++ linux-2.6.23.17/drivers/mtd/devices/block2mtd.c -@@ -20,6 +20,8 @@ - #include - #include - #include -+#include -+#include - - #define VERSION "$Revision: 1.30 $" - -@@ -27,6 +29,12 @@ - #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) - #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args) - -+struct retry { -+ struct list_head list; -+ const char *val; -+}; -+ -+static LIST_HEAD(retry_list); - - /* Info for the block device */ - struct block2mtd_dev { -@@ -38,10 +46,36 @@ struct block2mtd_dev { - char devname[0]; - }; - -+static int block2mtd_setup2(const char *val); - - /* Static info about the MTD, used in cleanup_module */ - static LIST_HEAD(blkmtd_device_list); - -+static int add_retry(const char *val) -+{ -+ struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL); -+ -+ INIT_LIST_HEAD(&r->list); -+ r->val = val; -+ list_add(&r->list, &retry_list); -+ -+ return 0; -+} -+ -+static int __init process_retries(void) -+{ -+ struct list_head *p, *tmp; -+ -+ list_for_each_safe(p, tmp, &retry_list) { -+ struct retry *r = list_entry(p, struct retry, list); -+ block2mtd_setup2(r->val); -+ msleep(100); -+ list_del(p); -+ kfree(r); -+ } -+ return 0; -+} -+rootfs_initcall(process_retries); - - static struct page *page_read(struct address_space *mapping, int index) - { -@@ -518,7 +552,10 @@ static int block2mtd_setup2(const char * - if (token[2] && (strlen(token[2]) + 1 > 80)) - parse_err("mtd device name too long"); - -- add_device(name, erase_size, token[2]); -+ if (add_device(name, erase_size, token[2]) == NULL) { -+ add_retry(val); -+ return 0; -+ } - - return 0; - } -@@ -534,8 +571,11 @@ static int block2mtd_setup(const char *v - and block2mtd_init() has already been called, - we can parse the argument now. */ - -- if (block2mtd_init_called) -+ if (block2mtd_init_called) { -+ /* if the call failed (e.g. because the device does not exist yet) -+ * then try again just before attempting to mount the rootfs */ - return block2mtd_setup2(val); -+ } - - /* During early boot stage, we only save the parameters - here. We must parse them later: if the param passed -Index: linux-2.6.23.17/init/do_mounts.c -=================================================================== ---- linux-2.6.23.17.orig/init/do_mounts.c -+++ linux-2.6.23.17/init/do_mounts.c -@@ -241,16 +241,8 @@ static int __init fs_names_setup(char *s - return 1; - } - --static unsigned int __initdata root_delay; --static int __init root_delay_setup(char *str) --{ -- root_delay = simple_strtoul(str, NULL, 0); -- return 1; --} -- - __setup("rootflags=", root_data_setup); - __setup("rootfstype=", fs_names_setup); --__setup("rootdelay=", root_delay_setup); - - static void __init get_fs_names(char *page) - { -@@ -426,18 +418,6 @@ void __init prepare_namespace(void) - { - int is_floppy; - -- if (root_delay) { -- printk(KERN_INFO "Waiting %dsec before mounting root device...\n", -- root_delay); -- ssleep(root_delay); -- } -- -- /* wait for the known devices to complete their probing */ -- while (driver_probe_done() != 0) -- msleep(100); -- -- md_run_setup(); -- - if (saved_root_name[0]) { - root_device_name = saved_root_name; - if (!strncmp(root_device_name, "mtd", 3)) { -Index: linux-2.6.23.17/init/main.c -=================================================================== ---- linux-2.6.23.17.orig/init/main.c -+++ linux-2.6.23.17/init/main.c -@@ -65,6 +65,7 @@ - #ifdef CONFIG_X86_LOCAL_APIC - #include - #endif -+#include "do_mounts.h" - - /* - * This is one of the first .c files built. Error out early if we have compiler -@@ -662,13 +663,14 @@ static int __init initcall_debug_setup(c - __setup("initcall_debug", initcall_debug_setup); - - extern initcall_t __initcall_start[], __initcall_end[]; -+extern initcall_t __root_initcall_start[], __root_initcall_end[]; - --static void __init do_initcalls(void) -+static void __init do_initcalls(initcall_t *start, initcall_t *end) - { - initcall_t *call; - int count = preempt_count(); - -- for (call = __initcall_start; call < __initcall_end; call++) { -+ for (call = start; call < end; call++) { - ktime_t t0, t1, delta; - char *msg = NULL; - char msgbuf[40]; -@@ -737,7 +739,7 @@ static void __init do_basic_setup(void) - usermodehelper_init(); - driver_init(); - init_irq_proc(); -- do_initcalls(); -+ do_initcalls(__initcall_start, __initcall_end); - } - - static int __initdata nosoftlockup; -@@ -810,6 +812,14 @@ static int noinline init_post(void) - panic("No init found. Try passing init= option to kernel."); - } - -+static unsigned int __initdata root_delay; -+static int __init root_delay_setup(char *str) -+{ -+ root_delay = simple_strtoul(str, NULL, 0); -+ return 1; -+} -+__setup("rootdelay=", root_delay_setup); -+ - static int __init kernel_init(void * unused) - { - lock_kernel(); -@@ -851,6 +861,17 @@ static int __init kernel_init(void * unu - - if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) { - ramdisk_execute_command = NULL; -+ if (root_delay) { -+ printk(KERN_INFO "Waiting %dsec before mounting root device...\n", -+ root_delay); -+ ssleep(root_delay); -+ } -+ /* wait for the known devices to complete their probing */ -+ while (driver_probe_done() != 0) -+ msleep(100); -+ md_run_setup(); -+ do_initcalls(__root_initcall_start, __root_initcall_end); -+ - prepare_namespace(); - } - -Index: linux-2.6.23.17/arch/i386/kernel/vmlinux.lds.S -=================================================================== ---- linux-2.6.23.17.orig/arch/i386/kernel/vmlinux.lds.S -+++ linux-2.6.23.17/arch/i386/kernel/vmlinux.lds.S -@@ -146,6 +146,11 @@ SECTIONS - INITCALLS - __initcall_end = .; - } -+ .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) { -+ __root_initcall_start = .; -+ INITCALLS_ROOT -+ __root_initcall_end = .; -+ } - .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { - __con_initcall_start = .; - *(.con_initcall.init) -Index: linux-2.6.23.17/include/asm-generic/vmlinux.lds.h -=================================================================== ---- linux-2.6.23.17.orig/include/asm-generic/vmlinux.lds.h -+++ linux-2.6.23.17/include/asm-generic/vmlinux.lds.h -@@ -243,12 +243,14 @@ - *(.initcall4s.init) \ - *(.initcall5.init) \ - *(.initcall5s.init) \ -- *(.initcallrootfs.init) \ - *(.initcall6.init) \ - *(.initcall6s.init) \ - *(.initcall7.init) \ - *(.initcall7s.init) - -+#define INITCALLS_ROOT \ -+ *(.initcallrootfs.init) -+ - #define PERCPU(align) \ - . = ALIGN(align); \ - __per_cpu_start = .; \