From: Daniel Golle Date: Sat, 17 Sep 2022 19:11:12 +0000 (+0100) Subject: mac80211: rt2x00: replace patches with v3 of pending series X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=412fcf3d4400f84551f3ead0514834c62d94a251;p=openwrt%2Fstaging%2Fthess.git mac80211: rt2x00: replace patches with v3 of pending series See also patchwork for submission progress: https://patchwork.kernel.org/project/linux-wireless/cover/cover.1663445157.git.daniel@makrotopia.org/ Signed-off-by: Daniel Golle --- diff --git a/package/kernel/mac80211/patches/rt2x00/001-rt2x00-define-RF5592-in-init_eeprom-routine.patch b/package/kernel/mac80211/patches/rt2x00/001-rt2x00-define-RF5592-in-init_eeprom-routine.patch new file mode 100644 index 0000000000..351e24a4d5 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/001-rt2x00-define-RF5592-in-init_eeprom-routine.patch @@ -0,0 +1,52 @@ +From patchwork Sat Sep 17 20:26:27 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979242 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:26:27 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 01/16] rt2x00: define RF5592 in init_eeprom routine +Message-ID: + +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +From: Tomislav Požega + +Fix incorrect RF value encoded in EEPROM on devices with Ralink Rt5592 +PCIe radio (a single chip 2T2R 802.11abgn solution). + +Signed-off-by: Tomislav Požega +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -9435,6 +9435,8 @@ static int rt2800_init_eeprom(struct rt2 + rf = RF3853; + else if (rt2x00_rt(rt2x00dev, RT5350)) + rf = RF5350; ++ else if (rt2x00_rt(rt2x00dev, RT5592)) ++ rf = RF5592; + else + rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE); + diff --git a/package/kernel/mac80211/patches/rt2x00/002-rt2x00-add-throughput-LED-trigger.patch b/package/kernel/mac80211/patches/rt2x00/002-rt2x00-add-throughput-LED-trigger.patch new file mode 100644 index 0000000000..02d1f7a2e5 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/002-rt2x00-add-throughput-LED-trigger.patch @@ -0,0 +1,76 @@ +From patchwork Sat Sep 17 20:26:40 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979243 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:26:40 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 02/16] rt2x00: add throughput LED trigger +Message-ID: + <73f5ba4134e621462a26186449400cf0c1ac1730.1663445157.git.daniel@makrotopia.org> +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +From: David Bauer + +This adds a (currently missing) throughput LED trigger for the rt2x00 +driver. Previously, LED triggers had to be assigned to the netdev, which +was limited to a single VAP. + +Tested-by: Christoph Krapp +Signed-off-by: David Bauer +Acked-by: Stanislaw Gruszka +--- + drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +@@ -1093,6 +1093,19 @@ static void rt2x00lib_remove_hw(struct r + kfree(rt2x00dev->spec.channels_info); + } + ++static const struct ieee80211_tpt_blink rt2x00_tpt_blink[] = { ++ { .throughput = 0 * 1024, .blink_time = 334 }, ++ { .throughput = 1 * 1024, .blink_time = 260 }, ++ { .throughput = 2 * 1024, .blink_time = 220 }, ++ { .throughput = 5 * 1024, .blink_time = 190 }, ++ { .throughput = 10 * 1024, .blink_time = 170 }, ++ { .throughput = 25 * 1024, .blink_time = 150 }, ++ { .throughput = 54 * 1024, .blink_time = 130 }, ++ { .throughput = 120 * 1024, .blink_time = 110 }, ++ { .throughput = 265 * 1024, .blink_time = 80 }, ++ { .throughput = 586 * 1024, .blink_time = 50 }, ++}; ++ + static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) + { + struct hw_mode_spec *spec = &rt2x00dev->spec; +@@ -1174,6 +1187,11 @@ static int rt2x00lib_probe_hw(struct rt2 + + #undef RT2X00_TASKLET_INIT + ++ ieee80211_create_tpt_led_trigger(rt2x00dev->hw, ++ IEEE80211_TPT_LEDTRIG_FL_RADIO, ++ rt2x00_tpt_blink, ++ ARRAY_SIZE(rt2x00_tpt_blink)); ++ + /* + * Register HW. + */ diff --git a/package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch b/package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch deleted file mode 100644 index df4aab0d95..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 15eed6b853b7e06f08632ef3cbe6cc42ac3eb858 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Thu, 27 Dec 2018 15:05:26 +0100 -Subject: [PATCH 01/16] rt2x00: define RF5592 in init_eeprom routine -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -From: Tomislav Požega - -This patch fixes following crash on Linksys EA2750 during 5GHz wifi -init: - -[ 7.955153] rt2800pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4 -[ 7.962259] rt2800pci 0000:01:00.0: loaded eeprom from mtd device "Factory" -[ 7.969435] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected -[ 7.977348] ieee80211 phy0: rt2800_init_eeprom: Error - Invalid RF chipset 0x0000 detected -[ 7.985793] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device -[ 7.993569] CPU 0 Unable to handle kernel paging request at virtual address 00000024, epc == 800c8f54, ra == 80249ff8 -[ 8.004408] Oops[#1]: - -Signed-off-by: Tomislav Požega ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9435,6 +9435,8 @@ static int rt2800_init_eeprom(struct rt2 - rf = RF3853; - else if (rt2x00_rt(rt2x00dev, RT5350)) - rf = RF5350; -+ else if (rt2x00_rt(rt2x00dev, RT5592)) -+ rf = RF5592; - else - rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE); - diff --git a/package/kernel/mac80211/patches/rt2x00/003-rt2x00-add-support-for-external-PA-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/003-rt2x00-add-support-for-external-PA-on-MT7620.patch new file mode 100644 index 0000000000..216f583063 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/003-rt2x00-add-support-for-external-PA-on-MT7620.patch @@ -0,0 +1,125 @@ +From patchwork Sat Sep 17 20:26:55 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979244 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:26:55 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 03/16] rt2x00: add support for external PA on MT7620 +Message-ID: + +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +Implement support for external PA connected to MT7620A. + +Signed-off-by: Tomislav Požega +[pozega.tomislav@gmail.com: use chanreg and dccal helpers.] +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- + drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 + + .../net/wireless/ralink/rt2x00/rt2800lib.c | 52 ++++++++++++++++++- + 2 files changed, 52 insertions(+), 1 deletion(-) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h +@@ -2739,6 +2739,7 @@ enum rt2800_eeprom_word { + #define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f) + #define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0) + #define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600) ++#define EEPROM_NIC_CONF2_EXTERNAL_PA FIELD16(0x8000) + + /* + * EEPROM LNA +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -4368,6 +4368,43 @@ static void rt2800_config_channel(struct + rt2800_iq_calibrate(rt2x00dev, rf->channel); + } + ++ if (rt2x00_rt(rt2x00dev, RT6352)) { ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, ++ &rt2x00dev->cap_flags)) { ++ reg = rt2800_register_read(rt2x00dev, RF_CONTROL3); ++ reg |= 0x00000101; ++ rt2800_register_write(rt2x00dev, RF_CONTROL3, reg); ++ ++ reg = rt2800_register_read(rt2x00dev, RF_BYPASS3); ++ reg |= 0x00000101; ++ rt2800_register_write(rt2x00dev, RF_BYPASS3, reg); ++ ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0x73); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0x73); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0x73); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0xC8); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xA4); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x05); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x27); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0xC8); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xA4); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x05); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x27); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0xC8); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xA4); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x05); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 05, 0x00); ++ ++ rt2800_register_write(rt2x00dev, TX0_RF_GAIN_CORRECT, ++ 0x36303636); ++ rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN, ++ 0x6C6C6B6C); ++ rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN, ++ 0x6C6C6B6C); ++ } ++ } ++ + bbp = rt2800_bbp_read(rt2x00dev, 4); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); + rt2800_bbp_write(rt2x00dev, 4, bbp); +@@ -9566,7 +9603,8 @@ static int rt2800_init_eeprom(struct rt2 + */ + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); + +- if (rt2x00_rt(rt2x00dev, RT3352)) { ++ if (rt2x00_rt(rt2x00dev, RT3352) || ++ rt2x00_rt(rt2x00dev, RT6352)) { + if (rt2x00_get_field16(eeprom, + EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352)) + __set_bit(CAPABILITY_EXTERNAL_PA_TX0, +@@ -9577,6 +9615,18 @@ static int rt2800_init_eeprom(struct rt2 + &rt2x00dev->cap_flags); + } + ++ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2); ++ ++ if (rt2x00_rt(rt2x00dev, RT6352) && eeprom != 0 && eeprom != 0xffff) { ++ if (!rt2x00_get_field16(eeprom, ++ EEPROM_NIC_CONF2_EXTERNAL_PA)) { ++ __clear_bit(CAPABILITY_EXTERNAL_PA_TX0, ++ &rt2x00dev->cap_flags); ++ __clear_bit(CAPABILITY_EXTERNAL_PA_TX1, ++ &rt2x00dev->cap_flags); ++ } ++ } ++ + return 0; + } + diff --git a/package/kernel/mac80211/patches/rt2x00/004-rt2x00-move-up-and-reuse-busy-wait-functions.patch b/package/kernel/mac80211/patches/rt2x00/004-rt2x00-move-up-and-reuse-busy-wait-functions.patch new file mode 100644 index 0000000000..da453074a1 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/004-rt2x00-move-up-and-reuse-busy-wait-functions.patch @@ -0,0 +1,178 @@ +From patchwork Sat Sep 17 20:27:10 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979245 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:27:10 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 04/16] rt2x00: move up and reuse busy wait functions +Message-ID: + <3fdb9dc15e76a9f9c1948b4a3a1308a7a5677bb8.1663445157.git.daniel@makrotopia.org> +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +Move bbp_ready and rf_ready busy wait functions up in the code so they +can more easily be used. Allow specifying register mask in rf_ready +function which is useful for calibration routines which will be added +in follow-up commits. + +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- + .../net/wireless/ralink/rt2x00/rt2800lib.c | 99 +++++++++---------- + 1 file changed, 46 insertions(+), 53 deletions(-) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -2143,6 +2143,48 @@ void rt2800_config_erp(struct rt2x00_dev + } + EXPORT_SYMBOL_GPL(rt2800_config_erp); + ++static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev, ++ const struct rt2x00_field32 mask) ++{ ++ unsigned int i; ++ u32 reg; ++ ++ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { ++ reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); ++ if (!rt2x00_get_field32(reg, mask)) ++ return 0; ++ ++ udelay(REGISTER_BUSY_DELAY); ++ } ++ ++ rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n"); ++ return -EACCES; ++} ++ ++static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) ++{ ++ unsigned int i; ++ u8 value; ++ ++ /* ++ * BBP was enabled after firmware was loaded, ++ * but we need to reactivate it now. ++ */ ++ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); ++ rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); ++ msleep(1); ++ ++ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { ++ value = rt2800_bbp_read(rt2x00dev, 0); ++ if ((value != 0xff) && (value != 0x00)) ++ return 0; ++ udelay(REGISTER_BUSY_DELAY); ++ } ++ ++ rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); ++ return -EACCES; ++} ++ + static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev) + { + u32 reg; +@@ -3799,10 +3841,9 @@ static void rt2800_config_alc(struct rt2 + struct ieee80211_channel *chan, + int power_level) { + u16 eeprom, target_power, max_power; +- u32 mac_sys_ctrl, mac_status; ++ u32 mac_sys_ctrl; + u32 reg; + u8 bbp; +- int i; + + /* hardware unit is 0.5dBm, limited to 23.5dBm */ + power_level *= 2; +@@ -3838,16 +3879,8 @@ static void rt2800_config_alc(struct rt2 + /* Disable Tx/Rx */ + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + /* Check MAC Tx/Rx idle */ +- for (i = 0; i < 10000; i++) { +- mac_status = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); +- if (mac_status & 0x3) +- usleep_range(50, 200); +- else +- break; +- } +- +- if (i == 10000) +- rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n"); ++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY))) ++ rt2x00_warn(rt2x00dev, "RF busy while configuring ALC\n"); + + if (chan->center_freq > 2457) { + bbp = rt2800_bbp_read(rt2x00dev, 30); +@@ -6249,46 +6282,6 @@ static int rt2800_init_registers(struct + return 0; + } + +-static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) +-{ +- unsigned int i; +- u32 reg; +- +- for (i = 0; i < REGISTER_BUSY_COUNT; i++) { +- reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); +- if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) +- return 0; +- +- udelay(REGISTER_BUSY_DELAY); +- } +- +- rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n"); +- return -EACCES; +-} +- +-static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) +-{ +- unsigned int i; +- u8 value; +- +- /* +- * BBP was enabled after firmware was loaded, +- * but we need to reactivate it now. +- */ +- rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); +- rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); +- msleep(1); +- +- for (i = 0; i < REGISTER_BUSY_COUNT; i++) { +- value = rt2800_bbp_read(rt2x00dev, 0); +- if ((value != 0xff) && (value != 0x00)) +- return 0; +- udelay(REGISTER_BUSY_DELAY); +- } +- +- rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); +- return -EACCES; +-} + + static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev) + { +@@ -9110,7 +9103,7 @@ int rt2800_enable_radio(struct rt2x00_de + /* + * Wait BBP/RF to wake up. + */ +- if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev))) ++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY))) + return -EIO; + + /* diff --git a/package/kernel/mac80211/patches/rt2x00/005-rt2x00-add-RF-self-TXDC-calibration-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/005-rt2x00-add-RF-self-TXDC-calibration-for-MT7620.patch new file mode 100644 index 0000000000..4e98d6a375 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/005-rt2x00-add-RF-self-TXDC-calibration-for-MT7620.patch @@ -0,0 +1,106 @@ +From patchwork Sat Sep 17 20:27:26 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979246 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:27:26 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 05/16] rt2x00: add RF self TXDC calibration for MT7620 +Message-ID: + +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +From: Tomislav Požega + +Add TX self calibration based on mtk driver. + +Signed-off-by: Tomislav Požega +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- +v2: use ++i instead of i = i + 1 in loops + + .../net/wireless/ralink/rt2x00/rt2800lib.c | 48 +++++++++++++++++++ + 1 file changed, 48 insertions(+) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -8428,6 +8428,53 @@ static void rt2800_init_rfcsr_5592(struc + rt2800_led_open_drain_enable(rt2x00dev); + } + ++static void rt2800_rf_self_txdc_cal(struct rt2x00_dev *rt2x00dev) ++{ ++ u8 rfb5r1_org, rfb7r1_org, rfvalue; ++ u32 mac0518, mac051c, mac0528, mac052c; ++ u8 i; ++ ++ mac0518 = rt2800_register_read(rt2x00dev, RF_CONTROL0); ++ mac051c = rt2800_register_read(rt2x00dev, RF_BYPASS0); ++ mac0528 = rt2800_register_read(rt2x00dev, RF_CONTROL2); ++ mac052c = rt2800_register_read(rt2x00dev, RF_BYPASS2); ++ ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0); ++ rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0); ++ ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0xC); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x3306); ++ rt2800_register_write(rt2x00dev, RF_CONTROL2, 0x3330); ++ rt2800_register_write(rt2x00dev, RF_BYPASS2, 0xfffff); ++ rfb5r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1); ++ rfb7r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1); ++ ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, 0x4); ++ for (i = 0; i < 100; ++i) { ++ usleep_range(50, 100); ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1); ++ if ((rfvalue & 0x04) != 0x4) ++ break; ++ } ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rfb5r1_org); ++ ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, 0x4); ++ for (i = 0; i < 100; ++i) { ++ usleep_range(50, 100); ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1); ++ if ((rfvalue & 0x04) != 0x4) ++ break; ++ } ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, rfb7r1_org); ++ ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0); ++ rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, mac0518); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, mac051c); ++ rt2800_register_write(rt2x00dev, RF_CONTROL2, mac0528); ++ rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c); ++} ++ + static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, + bool set_bw, bool is_ht40) + { +@@ -9035,6 +9082,7 @@ static void rt2800_init_rfcsr_6352(struc + rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C); + ++ rt2800_rf_self_txdc_cal(rt2x00dev); + rt2800_bw_filter_calibration(rt2x00dev, true); + rt2800_bw_filter_calibration(rt2x00dev, false); + } diff --git a/package/kernel/mac80211/patches/rt2x00/006-rt2x00-add-r-calibration-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/006-rt2x00-add-r-calibration-for-MT7620.patch new file mode 100644 index 0000000000..7c69970166 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/006-rt2x00-add-r-calibration-for-MT7620.patch @@ -0,0 +1,203 @@ +From patchwork Sat Sep 17 20:27:41 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979247 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:27:41 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 06/16] rt2x00: add r calibration for MT7620 +Message-ID: + +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +From: Tomislav Požega + +Add r calibration code as found in mtk driver. + +Signed-off-by: Tomislav Požega +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- +v2: use rt2800_wait_bbp_rf_ready() + + drivers/net/wireless/ralink/rt2x00/rt2800.h | 2 + + .../net/wireless/ralink/rt2x00/rt2800lib.c | 133 ++++++++++++++++++ + 2 files changed, 135 insertions(+) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h +@@ -1016,6 +1016,8 @@ + */ + #define MAC_STATUS_CFG 0x1200 + #define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) ++#define MAC_STATUS_CFG_BBP_RF_BUSY_TX FIELD32(0x00000001) ++#define MAC_STATUS_CFG_BBP_RF_BUSY_RX FIELD32(0x00000002) + + /* + * PWR_PIN_CFG: +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -8475,6 +8475,138 @@ static void rt2800_rf_self_txdc_cal(stru + rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c); + } + ++static int rt2800_calcrcalibrationcode(struct rt2x00_dev *rt2x00dev, int d1, int d2) ++{ ++ int calcode = ((d2 - d1) * 1000) / 43; ++ ++ if ((calcode % 10) >= 5) ++ calcode += 10; ++ calcode = (calcode / 10); ++ ++ return calcode; ++} ++ ++static void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev) ++{ ++ u32 savemacsysctrl; ++ u8 saverfb0r1, saverfb0r34, saverfb0r35; ++ u8 saverfb5r4, saverfb5r17, saverfb5r18; ++ u8 saverfb5r19, saverfb5r20; ++ u8 savebbpr22, savebbpr47, savebbpr49; ++ u8 bytevalue = 0; ++ int rcalcode; ++ u8 r_cal_code = 0; ++ char d1 = 0, d2 = 0; ++ u8 rfvalue; ++ u32 MAC_RF_BYPASS0, MAC_RF_CONTROL0, MAC_PWR_PIN_CFG; ++ u32 maccfg; ++ ++ saverfb0r1 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); ++ saverfb0r34 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 34); ++ saverfb0r35 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35); ++ saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); ++ saverfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); ++ saverfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18); ++ saverfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19); ++ saverfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20); ++ ++ savebbpr22 = rt2800_bbp_read(rt2x00dev, 22); ++ savebbpr47 = rt2800_bbp_read(rt2x00dev, 47); ++ savebbpr49 = rt2800_bbp_read(rt2x00dev, 49); ++ ++ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ MAC_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0); ++ MAC_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0); ++ MAC_PWR_PIN_CFG = rt2800_register_read(rt2x00dev, PWR_PIN_CFG); ++ ++ maccfg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ maccfg &= (~0x04); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg); ++ ++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX))) ++ rt2x00_warn(rt2x00dev, "Wait MAC Tx Status to MAX !!!\n"); ++ ++ maccfg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ maccfg &= (~0x04); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg); ++ ++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX))) ++ rt2x00_warn(rt2x00dev, "Wait MAC Rx Status to MAX !!!\n"); ++ ++ rfvalue = (MAC_RF_BYPASS0 | 0x3004); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, rfvalue); ++ rfvalue = (MAC_RF_CONTROL0 | (~0x3002)); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, rfvalue); ++ ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, 0x27); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, 0x80); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0x83); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x00); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x20); ++ ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x00); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 34, 0x13); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00); ++ ++ rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x1); ++ ++ rt2800_bbp_write(rt2x00dev, 47, 0x04); ++ rt2800_bbp_write(rt2x00dev, 22, 0x80); ++ usleep_range(100, 200); ++ bytevalue = rt2800_bbp_read(rt2x00dev, 49); ++ if (bytevalue > 128) ++ d1 = bytevalue - 256; ++ else ++ d1 = (char)bytevalue; ++ rt2800_bbp_write(rt2x00dev, 22, 0x0); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x01); ++ ++ rt2800_bbp_write(rt2x00dev, 22, 0x80); ++ usleep_range(100, 200); ++ bytevalue = rt2800_bbp_read(rt2x00dev, 49); ++ if (bytevalue > 128) ++ d2 = bytevalue - 256; ++ else ++ d2 = (char)bytevalue; ++ rt2800_bbp_write(rt2x00dev, 22, 0x0); ++ ++ rcalcode = rt2800_calcrcalibrationcode(rt2x00dev, d1, d2); ++ if (rcalcode < 0) ++ r_cal_code = 256 + rcalcode; ++ else ++ r_cal_code = (u8)rcalcode; ++ ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 7, r_cal_code); ++ ++ rt2800_bbp_write(rt2x00dev, 22, 0x0); ++ ++ bytevalue = rt2800_bbp_read(rt2x00dev, 21); ++ bytevalue |= 0x1; ++ rt2800_bbp_write(rt2x00dev, 21, bytevalue); ++ bytevalue = rt2800_bbp_read(rt2x00dev, 21); ++ bytevalue &= (~0x1); ++ rt2800_bbp_write(rt2x00dev, 21, bytevalue); ++ ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, saverfb0r1); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 34, saverfb0r34); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, saverfb0r35); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r4); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, saverfb5r17); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, saverfb5r18); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, saverfb5r19); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, saverfb5r20); ++ ++ rt2800_bbp_write(rt2x00dev, 22, savebbpr22); ++ rt2800_bbp_write(rt2x00dev, 47, savebbpr47); ++ rt2800_bbp_write(rt2x00dev, 49, savebbpr49); ++ ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, MAC_RF_BYPASS0); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, MAC_RF_CONTROL0); ++ ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); ++ rt2800_register_write(rt2x00dev, PWR_PIN_CFG, MAC_PWR_PIN_CFG); ++} ++ + static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, + bool set_bw, bool is_ht40) + { +@@ -9082,6 +9214,7 @@ static void rt2800_init_rfcsr_6352(struc + rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00); + rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C); + ++ rt2800_r_calibration(rt2x00dev); + rt2800_rf_self_txdc_cal(rt2x00dev); + rt2800_bw_filter_calibration(rt2x00dev, true); + rt2800_bw_filter_calibration(rt2x00dev, false); diff --git a/package/kernel/mac80211/patches/rt2x00/007-rt2x00-add-RXDCOC-calibration-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/007-rt2x00-add-RXDCOC-calibration-for-MT7620.patch new file mode 100644 index 0000000000..8da41e875a --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/007-rt2x00-add-RXDCOC-calibration-for-MT7620.patch @@ -0,0 +1,117 @@ +From patchwork Sat Sep 17 20:27:56 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979248 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:27:56 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 07/16] rt2x00: add RXDCOC calibration for MT7620 +Message-ID: + <850b30f652e88de30d79e968af4eb47aa5bc2511.1663445157.git.daniel@makrotopia.org> +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +From: Tomislav Požega + +Add RXDCOC calibration code from mtk driver. + +Signed-off-by: Tomislav Požega +[fixed typo reported by Serge Vasilugin ] +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- + .../net/wireless/ralink/rt2x00/rt2800lib.c | 60 +++++++++++++++++++ + 1 file changed, 60 insertions(+) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -8607,6 +8607,65 @@ static void rt2800_r_calibration(struct + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, MAC_PWR_PIN_CFG); + } + ++static void rt2800_rxdcoc_calibration(struct rt2x00_dev *rt2x00dev) ++{ ++ u8 bbpreg = 0; ++ u32 macvalue = 0; ++ u8 saverfb0r2, saverfb5r4, saverfb7r4, rfvalue; ++ int i; ++ ++ saverfb0r2 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); ++ rfvalue = saverfb0r2; ++ rfvalue |= 0x03; ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfvalue); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 141); ++ bbpreg = rt2800_bbp_read(rt2x00dev, 159); ++ bbpreg |= 0x10; ++ rt2800_bbp_write(rt2x00dev, 159, bbpreg); ++ ++ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x8); ++ ++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX))) ++ rt2x00_warn(rt2x00dev, "RF TX busy in RX RXDCOC calibration\n"); ++ ++ saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); ++ saverfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4); ++ saverfb5r4 = saverfb5r4 & (~0x40); ++ saverfb7r4 = saverfb7r4 & (~0x40); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x64); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r4); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, saverfb7r4); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 141); ++ bbpreg = rt2800_bbp_read(rt2x00dev, 159); ++ bbpreg = bbpreg & (~0x40); ++ rt2800_bbp_write(rt2x00dev, 159, bbpreg); ++ bbpreg |= 0x48; ++ rt2800_bbp_write(rt2x00dev, 159, bbpreg); ++ ++ for (i = 0; i < 10000; i++) { ++ bbpreg = rt2800_bbp_read(rt2x00dev, 159); ++ if ((bbpreg & 0x40) == 0) ++ break; ++ usleep_range(50, 100); ++ } ++ ++ bbpreg = rt2800_bbp_read(rt2x00dev, 159); ++ bbpreg = bbpreg & (~0x40); ++ rt2800_bbp_write(rt2x00dev, 159, bbpreg); ++ ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 141); ++ bbpreg = rt2800_bbp_read(rt2x00dev, 159); ++ bbpreg &= (~0x10); ++ rt2800_bbp_write(rt2x00dev, 159, bbpreg); ++ ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, saverfb0r2); ++} ++ + static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, + bool set_bw, bool is_ht40) + { +@@ -9216,6 +9275,7 @@ static void rt2800_init_rfcsr_6352(struc + + rt2800_r_calibration(rt2x00dev); + rt2800_rf_self_txdc_cal(rt2x00dev); ++ rt2800_rxdcoc_calibration(rt2x00dev); + rt2800_bw_filter_calibration(rt2x00dev, true); + rt2800_bw_filter_calibration(rt2x00dev, false); + } diff --git a/package/kernel/mac80211/patches/rt2x00/008-rt2x00-add-RXIQ-calibration-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/008-rt2x00-add-RXIQ-calibration-for-MT7620.patch new file mode 100644 index 0000000000..dc516da43a --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/008-rt2x00-add-RXIQ-calibration-for-MT7620.patch @@ -0,0 +1,434 @@ +From patchwork Sat Sep 17 20:28:10 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979249 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:28:10 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 08/16] rt2x00: add RXIQ calibration for MT7620 +Message-ID: + <033a39a697d51f6df258acea4c33608e0944fe4c.1663445157.git.daniel@makrotopia.org> +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +From: Tomislav Požega + +Add RXIQ calibration found in mtk driver. With old openwrt builds this +gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout). + +Signed-off-by: Tomislav Požega +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- +v2: use rt2800_wait_bbp_rf_ready(), fix indentation + + .../net/wireless/ralink/rt2x00/rt2800lib.c | 375 ++++++++++++++++++ + 1 file changed, 375 insertions(+) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -8666,6 +8666,380 @@ static void rt2800_rxdcoc_calibration(st + rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, saverfb0r2); + } + ++static u32 rt2800_do_sqrt_accumulation(u32 si) ++{ ++ u32 root, root_pre, bit; ++ char i; ++ ++ bit = 1 << 15; ++ root = 0; ++ for (i = 15; i >= 0; i = i - 1) { ++ root_pre = root + bit; ++ if ((root_pre * root_pre) <= si) ++ root = root_pre; ++ bit = bit >> 1; ++ } ++ ++ return root; ++} ++ ++static void rt2800_rxiq_calibration(struct rt2x00_dev *rt2x00dev) ++{ ++ u8 rfb0r1, rfb0r2, rfb0r42; ++ u8 rfb4r0, rfb4r19; ++ u8 rfb5r3, rfb5r4, rfb5r17, rfb5r18, rfb5r19, rfb5r20; ++ u8 rfb6r0, rfb6r19; ++ u8 rfb7r3, rfb7r4, rfb7r17, rfb7r18, rfb7r19, rfb7r20; ++ ++ u8 bbp1, bbp4; ++ u8 bbpr241, bbpr242; ++ u32 i; ++ u8 ch_idx; ++ u8 bbpval; ++ u8 rfval, vga_idx = 0; ++ int mi = 0, mq = 0, si = 0, sq = 0, riq = 0; ++ int sigma_i, sigma_q, r_iq, g_rx; ++ int g_imb; ++ int ph_rx; ++ u32 savemacsysctrl = 0; ++ u32 orig_RF_CONTROL0 = 0; ++ u32 orig_RF_BYPASS0 = 0; ++ u32 orig_RF_CONTROL1 = 0; ++ u32 orig_RF_BYPASS1 = 0; ++ u32 orig_RF_CONTROL3 = 0; ++ u32 orig_RF_BYPASS3 = 0; ++ u32 bbpval1 = 0; ++ static const u8 rf_vga_table[] = {0x20, 0x21, 0x22, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f}; ++ ++ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ orig_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0); ++ orig_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0); ++ orig_RF_CONTROL1 = rt2800_register_read(rt2x00dev, RF_CONTROL1); ++ orig_RF_BYPASS1 = rt2800_register_read(rt2x00dev, RF_BYPASS1); ++ orig_RF_CONTROL3 = rt2800_register_read(rt2x00dev, RF_CONTROL3); ++ orig_RF_BYPASS3 = rt2800_register_read(rt2x00dev, RF_BYPASS3); ++ ++ bbp1 = rt2800_bbp_read(rt2x00dev, 1); ++ bbp4 = rt2800_bbp_read(rt2x00dev, 4); ++ ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x0); ++ ++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY))) ++ rt2x00_warn(rt2x00dev, "Timeout waiting for MAC status in RXIQ calibration\n"); ++ ++ bbpval = bbp4 & (~0x18); ++ bbpval = bbp4 | 0x00; ++ rt2800_bbp_write(rt2x00dev, 4, bbpval); ++ ++ bbpval = rt2800_bbp_read(rt2x00dev, 21); ++ bbpval = bbpval | 1; ++ rt2800_bbp_write(rt2x00dev, 21, bbpval); ++ bbpval = bbpval & 0xfe; ++ rt2800_bbp_write(rt2x00dev, 21, bbpval); ++ ++ rt2800_register_write(rt2x00dev, RF_CONTROL1, 0x00000202); ++ rt2800_register_write(rt2x00dev, RF_BYPASS1, 0x00000303); ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) ++ rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x0101); ++ else ++ rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x0000); ++ ++ rt2800_register_write(rt2x00dev, RF_BYPASS3, 0xf1f1); ++ ++ rfb0r1 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); ++ rfb0r2 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); ++ rfb0r42 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); ++ rfb4r0 = rt2800_rfcsr_read_bank(rt2x00dev, 4, 0); ++ rfb4r19 = rt2800_rfcsr_read_bank(rt2x00dev, 4, 19); ++ rfb5r3 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3); ++ rfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); ++ rfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); ++ rfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18); ++ rfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19); ++ rfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20); ++ ++ rfb6r0 = rt2800_rfcsr_read_bank(rt2x00dev, 6, 0); ++ rfb6r19 = rt2800_rfcsr_read_bank(rt2x00dev, 6, 19); ++ rfb7r3 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 3); ++ rfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4); ++ rfb7r17 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 17); ++ rfb7r18 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 18); ++ rfb7r19 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 19); ++ rfb7r20 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 20); ++ ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x87); ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0x27); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x38); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x38); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x80); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 18, 0xC1); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 19, 0x60); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 20, 0x00); ++ ++ rt2800_bbp_write(rt2x00dev, 23, 0x0); ++ rt2800_bbp_write(rt2x00dev, 24, 0x0); ++ ++ rt2800_bbp_dcoc_write(rt2x00dev, 5, 0x0); ++ ++ bbpr241 = rt2800_bbp_read(rt2x00dev, 241); ++ bbpr242 = rt2800_bbp_read(rt2x00dev, 242); ++ ++ rt2800_bbp_write(rt2x00dev, 241, 0x10); ++ rt2800_bbp_write(rt2x00dev, 242, 0x84); ++ rt2800_bbp_write(rt2x00dev, 244, 0x31); ++ ++ bbpval = rt2800_bbp_dcoc_read(rt2x00dev, 3); ++ bbpval = bbpval & (~0x7); ++ rt2800_bbp_dcoc_write(rt2x00dev, 3, bbpval); ++ ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); ++ udelay(1); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000006); ++ usleep_range(1, 200); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003376); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006); ++ udelay(1); ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { ++ rt2800_bbp_write(rt2x00dev, 23, 0x06); ++ rt2800_bbp_write(rt2x00dev, 24, 0x06); ++ } else { ++ rt2800_bbp_write(rt2x00dev, 23, 0x02); ++ rt2800_bbp_write(rt2x00dev, 24, 0x02); ++ } ++ ++ for (ch_idx = 0; ch_idx < 2; ch_idx = ch_idx + 1) { ++ if (ch_idx == 0) { ++ rfval = rfb0r1 & (~0x3); ++ rfval = rfb0r1 | 0x1; ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfval); ++ rfval = rfb0r2 & (~0x33); ++ rfval = rfb0r2 | 0x11; ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfval); ++ rfval = rfb0r42 & (~0x50); ++ rfval = rfb0r42 | 0x10; ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfval); ++ ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006); ++ udelay(1); ++ ++ bbpval = bbp1 & (~0x18); ++ bbpval = bbpval | 0x00; ++ rt2800_bbp_write(rt2x00dev, 1, bbpval); ++ ++ rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x00); ++ } else { ++ rfval = rfb0r1 & (~0x3); ++ rfval = rfb0r1 | 0x2; ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfval); ++ rfval = rfb0r2 & (~0x33); ++ rfval = rfb0r2 | 0x22; ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfval); ++ rfval = rfb0r42 & (~0x50); ++ rfval = rfb0r42 | 0x40; ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfval); ++ ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002006); ++ udelay(1); ++ ++ bbpval = bbp1 & (~0x18); ++ bbpval = bbpval | 0x08; ++ rt2800_bbp_write(rt2x00dev, 1, bbpval); ++ ++ rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x01); ++ } ++ usleep_range(500, 1500); ++ ++ vga_idx = 0; ++ while (vga_idx < 11) { ++ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rf_vga_table[vga_idx]); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rf_vga_table[vga_idx]); ++ ++ rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x93); ++ ++ for (i = 0; i < 10000; i++) { ++ bbpval = rt2800_bbp_read(rt2x00dev, 159); ++ if ((bbpval & 0xff) == 0x93) ++ usleep_range(50, 100); ++ else ++ break; ++ } ++ ++ if ((bbpval & 0xff) == 0x93) { ++ rt2x00_warn(rt2x00dev, "Fatal Error: Calibration doesn't finish"); ++ goto restore_value; ++ } ++ for (i = 0; i < 5; i++) { ++ u32 bbptemp = 0; ++ u8 value = 0; ++ int result = 0; ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x1e); ++ rt2800_bbp_write(rt2x00dev, 159, i); ++ rt2800_bbp_write(rt2x00dev, 158, 0x22); ++ value = rt2800_bbp_read(rt2x00dev, 159); ++ bbptemp = bbptemp + (value << 24); ++ rt2800_bbp_write(rt2x00dev, 158, 0x21); ++ value = rt2800_bbp_read(rt2x00dev, 159); ++ bbptemp = bbptemp + (value << 16); ++ rt2800_bbp_write(rt2x00dev, 158, 0x20); ++ value = rt2800_bbp_read(rt2x00dev, 159); ++ bbptemp = bbptemp + (value << 8); ++ rt2800_bbp_write(rt2x00dev, 158, 0x1f); ++ value = rt2800_bbp_read(rt2x00dev, 159); ++ bbptemp = bbptemp + value; ++ ++ if (i < 2 && (bbptemp & 0x800000)) ++ result = (bbptemp & 0xffffff) - 0x1000000; ++ else if (i == 4) ++ result = bbptemp; ++ else ++ result = bbptemp; ++ ++ if (i == 0) ++ mi = result / 4096; ++ else if (i == 1) ++ mq = result / 4096; ++ else if (i == 2) ++ si = bbptemp / 4096; ++ else if (i == 3) ++ sq = bbptemp / 4096; ++ else ++ riq = result / 4096; ++ } ++ ++ bbpval1 = si - mi * mi; ++ rt2x00_dbg(rt2x00dev, ++ "RXIQ si=%d, sq=%d, riq=%d, bbpval %d, vga_idx %d", ++ si, sq, riq, bbpval1, vga_idx); ++ ++ if (bbpval1 >= (100 * 100)) ++ break; ++ ++ if (bbpval1 <= 100) ++ vga_idx = vga_idx + 9; ++ else if (bbpval1 <= 158) ++ vga_idx = vga_idx + 8; ++ else if (bbpval1 <= 251) ++ vga_idx = vga_idx + 7; ++ else if (bbpval1 <= 398) ++ vga_idx = vga_idx + 6; ++ else if (bbpval1 <= 630) ++ vga_idx = vga_idx + 5; ++ else if (bbpval1 <= 1000) ++ vga_idx = vga_idx + 4; ++ else if (bbpval1 <= 1584) ++ vga_idx = vga_idx + 3; ++ else if (bbpval1 <= 2511) ++ vga_idx = vga_idx + 2; ++ else ++ vga_idx = vga_idx + 1; ++ } ++ ++ sigma_i = rt2800_do_sqrt_accumulation(100 * (si - mi * mi)); ++ sigma_q = rt2800_do_sqrt_accumulation(100 * (sq - mq * mq)); ++ r_iq = 10 * (riq - (mi * mq)); ++ ++ rt2x00_dbg(rt2x00dev, "Sigma_i=%d, Sigma_q=%d, R_iq=%d", sigma_i, sigma_q, r_iq); ++ ++ if (sigma_i <= 1400 && sigma_i >= 1000 && ++ (sigma_i - sigma_q) <= 112 && ++ (sigma_i - sigma_q) >= -112 && ++ mi <= 32 && mi >= -32 && ++ mq <= 32 && mq >= -32) { ++ r_iq = 10 * (riq - (mi * mq)); ++ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n", ++ sigma_i, sigma_q, r_iq); ++ ++ g_rx = (1000 * sigma_q) / sigma_i; ++ g_imb = ((-2) * 128 * (1000 - g_rx)) / (1000 + g_rx); ++ ph_rx = (r_iq * 2292) / (sigma_i * sigma_q); ++ ++ if (ph_rx > 20 || ph_rx < -20) { ++ ph_rx = 0; ++ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL"); ++ } ++ ++ if (g_imb > 12 || g_imb < -12) { ++ g_imb = 0; ++ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL"); ++ } ++ } else { ++ g_imb = 0; ++ ph_rx = 0; ++ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n", ++ sigma_i, sigma_q, r_iq); ++ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL"); ++ } ++ ++ if (ch_idx == 0) { ++ rt2800_bbp_write(rt2x00dev, 158, 0x37); ++ rt2800_bbp_write(rt2x00dev, 159, g_imb & 0x3f); ++ rt2800_bbp_write(rt2x00dev, 158, 0x35); ++ rt2800_bbp_write(rt2x00dev, 159, ph_rx & 0x3f); ++ } else { ++ rt2800_bbp_write(rt2x00dev, 158, 0x55); ++ rt2800_bbp_write(rt2x00dev, 159, g_imb & 0x3f); ++ rt2800_bbp_write(rt2x00dev, 158, 0x53); ++ rt2800_bbp_write(rt2x00dev, 159, ph_rx & 0x3f); ++ } ++ } ++ ++restore_value: ++ rt2800_bbp_write(rt2x00dev, 158, 0x3); ++ bbpval = rt2800_bbp_read(rt2x00dev, 159); ++ rt2800_bbp_write(rt2x00dev, 159, (bbpval | 0x07)); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x00); ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ rt2800_bbp_write(rt2x00dev, 1, bbp1); ++ rt2800_bbp_write(rt2x00dev, 4, bbp4); ++ rt2800_bbp_write(rt2x00dev, 241, bbpr241); ++ rt2800_bbp_write(rt2x00dev, 242, bbpr242); ++ ++ rt2800_bbp_write(rt2x00dev, 244, 0x00); ++ bbpval = rt2800_bbp_read(rt2x00dev, 21); ++ bbpval |= 0x1; ++ rt2800_bbp_write(rt2x00dev, 21, bbpval); ++ usleep_range(10, 200); ++ bbpval &= 0xfe; ++ rt2800_bbp_write(rt2x00dev, 21, bbpval); ++ ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfb0r1); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfb0r2); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfb0r42); ++ ++ rt2800_rfcsr_write_bank(rt2x00dev, 4, 0, rfb4r0); ++ rt2800_rfcsr_write_bank(rt2x00dev, 4, 19, rfb4r19); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rfb5r3); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rfb5r4); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, rfb5r17); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, rfb5r18); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, rfb5r19); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, rfb5r20); ++ ++ rt2800_rfcsr_write_bank(rt2x00dev, 6, 0, rfb6r0); ++ rt2800_rfcsr_write_bank(rt2x00dev, 6, 19, rfb6r19); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 3, rfb7r3); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, rfb7r4); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 17, rfb7r17); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 18, rfb7r18); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 19, rfb7r19); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 20, rfb7r20); ++ ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000006); ++ udelay(1); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); ++ udelay(1); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, orig_RF_CONTROL0); ++ udelay(1); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, orig_RF_BYPASS0); ++ rt2800_register_write(rt2x00dev, RF_CONTROL1, orig_RF_CONTROL1); ++ rt2800_register_write(rt2x00dev, RF_BYPASS1, orig_RF_BYPASS1); ++ rt2800_register_write(rt2x00dev, RF_CONTROL3, orig_RF_CONTROL3); ++ rt2800_register_write(rt2x00dev, RF_BYPASS3, orig_RF_BYPASS3); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); ++} ++ + static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, + bool set_bw, bool is_ht40) + { +@@ -9278,6 +9652,7 @@ static void rt2800_init_rfcsr_6352(struc + rt2800_rxdcoc_calibration(rt2x00dev); + rt2800_bw_filter_calibration(rt2x00dev, true); + rt2800_bw_filter_calibration(rt2x00dev, false); ++ rt2800_rxiq_calibration(rt2x00dev); + } + + static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) diff --git a/package/kernel/mac80211/patches/rt2x00/009-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/009-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch new file mode 100644 index 0000000000..6b27f6a705 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/009-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch @@ -0,0 +1,52 @@ +From patchwork Sat Sep 17 20:28:29 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979250 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:28:29 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 09/16] rt2x00: don't run Rt5592 IQ calibration on MT7620 +Message-ID: + <31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org> +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +The function rt2800_iq_calibrate is intended for Rt5592 only. +Don't call it for MT7620 which has it's own calibration functions. + +Reported-by: Serge Vasilugin +Signed-off-by: Daniel Golle +--- +v2: test for RT5592 instead of !RT6352 + + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -4398,7 +4398,8 @@ static void rt2800_config_channel(struct + reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain; + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); + +- rt2800_iq_calibrate(rt2x00dev, rf->channel); ++ if (rt2x00_rt(rt2x00dev, RT5592)) ++ rt2800_iq_calibrate(rt2x00dev, rf->channel); + } + + if (rt2x00_rt(rt2x00dev, RT6352)) { diff --git a/package/kernel/mac80211/patches/rt2x00/010-rt2x00-add-TX-LOFT-calibration-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/010-rt2x00-add-TX-LOFT-calibration-for-MT7620.patch new file mode 100644 index 0000000000..bb01ff1dca --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/010-rt2x00-add-TX-LOFT-calibration-for-MT7620.patch @@ -0,0 +1,982 @@ +From patchwork Sat Sep 17 20:28:43 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 8bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979251 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:28:43 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 10/16] rt2x00: add TX LOFT calibration for MT7620 +Message-ID: + +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +From: Tomislav Požega + +Add TX LOFT calibration from mtk driver. + +Signed-off-by: Tomislav Požega +Signed-off-by: Daniel Golle +--- +v2: use helper functions, make tables static const, remove useless + debug prints +v3: don't export function not used anywhere else +Reported-by: kernel test robot + + .../net/wireless/ralink/rt2x00/rt2800lib.c | 902 ++++++++++++++++++ + .../net/wireless/ralink/rt2x00/rt2800lib.h | 10 + + 2 files changed, 912 insertions(+) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -9041,6 +9041,907 @@ restore_value: + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); + } + ++static void rt2800_rf_configstore(struct rt2x00_dev *rt2x00dev, ++ struct rf_reg_pair rf_reg_record[][13], u8 chain) ++{ ++ u8 rfvalue = 0; ++ ++ if (chain == CHAIN_0) { ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); ++ rf_reg_record[CHAIN_0][0].bank = 0; ++ rf_reg_record[CHAIN_0][0].reg = 1; ++ rf_reg_record[CHAIN_0][0].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); ++ rf_reg_record[CHAIN_0][1].bank = 0; ++ rf_reg_record[CHAIN_0][1].reg = 2; ++ rf_reg_record[CHAIN_0][1].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35); ++ rf_reg_record[CHAIN_0][2].bank = 0; ++ rf_reg_record[CHAIN_0][2].reg = 35; ++ rf_reg_record[CHAIN_0][2].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); ++ rf_reg_record[CHAIN_0][3].bank = 0; ++ rf_reg_record[CHAIN_0][3].reg = 42; ++ rf_reg_record[CHAIN_0][3].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 0); ++ rf_reg_record[CHAIN_0][4].bank = 4; ++ rf_reg_record[CHAIN_0][4].reg = 0; ++ rf_reg_record[CHAIN_0][4].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 2); ++ rf_reg_record[CHAIN_0][5].bank = 4; ++ rf_reg_record[CHAIN_0][5].reg = 2; ++ rf_reg_record[CHAIN_0][5].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 34); ++ rf_reg_record[CHAIN_0][6].bank = 4; ++ rf_reg_record[CHAIN_0][6].reg = 34; ++ rf_reg_record[CHAIN_0][6].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3); ++ rf_reg_record[CHAIN_0][7].bank = 5; ++ rf_reg_record[CHAIN_0][7].reg = 3; ++ rf_reg_record[CHAIN_0][7].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); ++ rf_reg_record[CHAIN_0][8].bank = 5; ++ rf_reg_record[CHAIN_0][8].reg = 4; ++ rf_reg_record[CHAIN_0][8].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); ++ rf_reg_record[CHAIN_0][9].bank = 5; ++ rf_reg_record[CHAIN_0][9].reg = 17; ++ rf_reg_record[CHAIN_0][9].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18); ++ rf_reg_record[CHAIN_0][10].bank = 5; ++ rf_reg_record[CHAIN_0][10].reg = 18; ++ rf_reg_record[CHAIN_0][10].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19); ++ rf_reg_record[CHAIN_0][11].bank = 5; ++ rf_reg_record[CHAIN_0][11].reg = 19; ++ rf_reg_record[CHAIN_0][11].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20); ++ rf_reg_record[CHAIN_0][12].bank = 5; ++ rf_reg_record[CHAIN_0][12].reg = 20; ++ rf_reg_record[CHAIN_0][12].value = rfvalue; ++ } else if (chain == CHAIN_1) { ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); ++ rf_reg_record[CHAIN_1][0].bank = 0; ++ rf_reg_record[CHAIN_1][0].reg = 1; ++ rf_reg_record[CHAIN_1][0].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); ++ rf_reg_record[CHAIN_1][1].bank = 0; ++ rf_reg_record[CHAIN_1][1].reg = 2; ++ rf_reg_record[CHAIN_1][1].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35); ++ rf_reg_record[CHAIN_1][2].bank = 0; ++ rf_reg_record[CHAIN_1][2].reg = 35; ++ rf_reg_record[CHAIN_1][2].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); ++ rf_reg_record[CHAIN_1][3].bank = 0; ++ rf_reg_record[CHAIN_1][3].reg = 42; ++ rf_reg_record[CHAIN_1][3].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 0); ++ rf_reg_record[CHAIN_1][4].bank = 6; ++ rf_reg_record[CHAIN_1][4].reg = 0; ++ rf_reg_record[CHAIN_1][4].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 2); ++ rf_reg_record[CHAIN_1][5].bank = 6; ++ rf_reg_record[CHAIN_1][5].reg = 2; ++ rf_reg_record[CHAIN_1][5].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 34); ++ rf_reg_record[CHAIN_1][6].bank = 6; ++ rf_reg_record[CHAIN_1][6].reg = 34; ++ rf_reg_record[CHAIN_1][6].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 3); ++ rf_reg_record[CHAIN_1][7].bank = 7; ++ rf_reg_record[CHAIN_1][7].reg = 3; ++ rf_reg_record[CHAIN_1][7].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4); ++ rf_reg_record[CHAIN_1][8].bank = 7; ++ rf_reg_record[CHAIN_1][8].reg = 4; ++ rf_reg_record[CHAIN_1][8].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 17); ++ rf_reg_record[CHAIN_1][9].bank = 7; ++ rf_reg_record[CHAIN_1][9].reg = 17; ++ rf_reg_record[CHAIN_1][9].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 18); ++ rf_reg_record[CHAIN_1][10].bank = 7; ++ rf_reg_record[CHAIN_1][10].reg = 18; ++ rf_reg_record[CHAIN_1][10].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 19); ++ rf_reg_record[CHAIN_1][11].bank = 7; ++ rf_reg_record[CHAIN_1][11].reg = 19; ++ rf_reg_record[CHAIN_1][11].value = rfvalue; ++ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 20); ++ rf_reg_record[CHAIN_1][12].bank = 7; ++ rf_reg_record[CHAIN_1][12].reg = 20; ++ rf_reg_record[CHAIN_1][12].value = rfvalue; ++ } else { ++ rt2x00_warn(rt2x00dev, "Unknown chain = %u\n", chain); ++ } ++} ++ ++static void rt2800_rf_configrecover(struct rt2x00_dev *rt2x00dev, ++ struct rf_reg_pair rf_record[][13]) ++{ ++ u8 chain_index = 0, record_index = 0; ++ u8 bank = 0, rf_register = 0, value = 0; ++ ++ for (chain_index = 0; chain_index < 2; chain_index++) { ++ for (record_index = 0; record_index < 13; record_index++) { ++ bank = rf_record[chain_index][record_index].bank; ++ rf_register = rf_record[chain_index][record_index].reg; ++ value = rf_record[chain_index][record_index].value; ++ rt2800_rfcsr_write_bank(rt2x00dev, bank, rf_register, value); ++ rt2x00_dbg(rt2x00dev, "bank: %d, rf_register: %d, value: %x\n", ++ bank, rf_register, value); ++ } ++ } ++} ++ ++static void rt2800_setbbptonegenerator(struct rt2x00_dev *rt2x00dev) ++{ ++ rt2800_bbp_write(rt2x00dev, 158, 0xAA); ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xAB); ++ rt2800_bbp_write(rt2x00dev, 159, 0x0A); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xAC); ++ rt2800_bbp_write(rt2x00dev, 159, 0x3F); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xAD); ++ rt2800_bbp_write(rt2x00dev, 159, 0x3F); ++ ++ rt2800_bbp_write(rt2x00dev, 244, 0x40); ++} ++ ++static u32 rt2800_do_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx, u8 read_neg) ++{ ++ u32 macvalue = 0; ++ int fftout_i = 0, fftout_q = 0; ++ u32 ptmp = 0, pint = 0; ++ u8 bbp = 0; ++ u8 tidxi; ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x00); ++ rt2800_bbp_write(rt2x00dev, 159, 0x9b); ++ ++ bbp = 0x9b; ++ ++ while (bbp == 0x9b) { ++ usleep_range(10, 50); ++ bbp = rt2800_bbp_read(rt2x00dev, 159); ++ bbp = bbp & 0xff; ++ } ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xba); ++ rt2800_bbp_write(rt2x00dev, 159, tidx); ++ rt2800_bbp_write(rt2x00dev, 159, tidx); ++ rt2800_bbp_write(rt2x00dev, 159, tidx); ++ ++ macvalue = rt2800_register_read(rt2x00dev, 0x057C); ++ ++ fftout_i = (macvalue >> 16); ++ fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i; ++ fftout_q = (macvalue & 0xffff); ++ fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q; ++ ptmp = (fftout_i * fftout_i); ++ ptmp = ptmp + (fftout_q * fftout_q); ++ pint = ptmp; ++ rt2x00_dbg(rt2x00dev, "I = %d, Q = %d, power = %x\n", fftout_i, fftout_q, pint); ++ if (read_neg) { ++ pint = pint >> 1; ++ tidxi = 0x40 - tidx; ++ tidxi = tidxi & 0x3f; ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xba); ++ rt2800_bbp_write(rt2x00dev, 159, tidxi); ++ rt2800_bbp_write(rt2x00dev, 159, tidxi); ++ rt2800_bbp_write(rt2x00dev, 159, tidxi); ++ ++ macvalue = rt2800_register_read(rt2x00dev, 0x057C); ++ ++ fftout_i = (macvalue >> 16); ++ fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i; ++ fftout_q = (macvalue & 0xffff); ++ fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q; ++ ptmp = (fftout_i * fftout_i); ++ ptmp = ptmp + (fftout_q * fftout_q); ++ ptmp = ptmp >> 1; ++ pint = pint + ptmp; ++ } ++ ++ return pint; ++} ++ ++static u32 rt2800_read_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx) ++{ ++ u32 macvalue = 0; ++ int fftout_i = 0, fftout_q = 0; ++ u32 ptmp = 0, pint = 0; ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xBA); ++ rt2800_bbp_write(rt2x00dev, 159, tidx); ++ rt2800_bbp_write(rt2x00dev, 159, tidx); ++ rt2800_bbp_write(rt2x00dev, 159, tidx); ++ ++ macvalue = rt2800_register_read(rt2x00dev, 0x057C); ++ ++ fftout_i = (macvalue >> 16); ++ fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i; ++ fftout_q = (macvalue & 0xffff); ++ fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q; ++ ptmp = (fftout_i * fftout_i); ++ ptmp = ptmp + (fftout_q * fftout_q); ++ pint = ptmp; ++ ++ return pint; ++} ++ ++static void rt2800_write_dc(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 alc, u8 iorq, u8 dc) ++{ ++ u8 bbp = 0; ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xb0); ++ bbp = alc | 0x80; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++ ++ if (ch_idx == 0) ++ bbp = (iorq == 0) ? 0xb1 : 0xb2; ++ else ++ bbp = (iorq == 0) ? 0xb8 : 0xb9; ++ ++ rt2800_bbp_write(rt2x00dev, 158, bbp); ++ bbp = dc; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++} ++ ++static void rt2800_loft_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, ++ u8 alc_idx, u8 dc_result[][RF_ALC_NUM][2]) ++{ ++ u32 p0 = 0, p1 = 0, pf = 0; ++ char idx0 = 0, idx1 = 0; ++ u8 idxf[] = {0x00, 0x00}; ++ u8 ibit = 0x20; ++ u8 iorq; ++ char bidx; ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xb0); ++ rt2800_bbp_write(rt2x00dev, 159, 0x80); ++ ++ for (bidx = 5; bidx >= 0; bidx--) { ++ for (iorq = 0; iorq <= 1; iorq++) { ++ if (idxf[iorq] == 0x20) { ++ idx0 = 0x20; ++ p0 = pf; ++ } else { ++ idx0 = idxf[iorq] - ibit; ++ idx0 = idx0 & 0x3F; ++ rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idx0); ++ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); ++ } ++ ++ idx1 = idxf[iorq] + (bidx == 5 ? 0 : ibit); ++ idx1 = idx1 & 0x3F; ++ rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idx1); ++ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); ++ ++ rt2x00_dbg(rt2x00dev, "alc=%u, IorQ=%u, idx_final=%2x\n", ++ alc_idx, iorq, idxf[iorq]); ++ rt2x00_dbg(rt2x00dev, "p0=%x, p1=%x, pf=%x, idx_0=%x, idx_1=%x, ibit=%x\n", ++ p0, p1, pf, idx0, idx1, ibit); ++ ++ if (bidx != 5 && pf <= p0 && pf < p1) { ++ idxf[iorq] = idxf[iorq]; ++ } else if (p0 < p1) { ++ pf = p0; ++ idxf[iorq] = idx0 & 0x3F; ++ } else { ++ pf = p1; ++ idxf[iorq] = idx1 & 0x3F; ++ } ++ rt2x00_dbg(rt2x00dev, "IorQ=%u, idx_final[%u]:%x, pf:%8x\n", ++ iorq, iorq, idxf[iorq], pf); ++ ++ rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idxf[iorq]); ++ } ++ ibit = ibit >> 1; ++ } ++ dc_result[ch_idx][alc_idx][0] = idxf[0]; ++ dc_result[ch_idx][alc_idx][1] = idxf[1]; ++} ++ ++static void rt2800_iq_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 *ges, u8 *pes) ++{ ++ u32 p0 = 0, p1 = 0, pf = 0; ++ char perr = 0, gerr = 0, iq_err = 0; ++ char pef = 0, gef = 0; ++ char psta, pend; ++ char gsta, gend; ++ ++ u8 ibit = 0x20; ++ u8 first_search = 0x00, touch_neg_max = 0x00; ++ char idx0 = 0, idx1 = 0; ++ u8 gop; ++ u8 bbp = 0; ++ char bidx; ++ ++ for (bidx = 5; bidx >= 1; bidx--) { ++ for (gop = 0; gop < 2; gop++) { ++ if (gop == 1 || bidx < 4) { ++ if (gop == 0) ++ iq_err = gerr; ++ else ++ iq_err = perr; ++ ++ first_search = (gop == 0) ? (bidx == 3) : (bidx == 5); ++ touch_neg_max = (gop) ? ((iq_err & 0x0F) == 0x08) : ++ ((iq_err & 0x3F) == 0x20); ++ ++ if (touch_neg_max) { ++ p0 = pf; ++ idx0 = iq_err; ++ } else { ++ idx0 = iq_err - ibit; ++ bbp = (ch_idx == 0) ? ((gop == 0) ? 0x28 : 0x29) : ++ ((gop == 0) ? 0x46 : 0x47); ++ ++ rt2800_bbp_write(rt2x00dev, 158, bbp); ++ rt2800_bbp_write(rt2x00dev, 159, idx0); ++ ++ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1); ++ } ++ ++ idx1 = iq_err + (first_search ? 0 : ibit); ++ idx1 = (gop == 0) ? (idx1 & 0x0F) : (idx1 & 0x3F); ++ ++ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 : ++ (gop == 0) ? 0x46 : 0x47; ++ ++ rt2800_bbp_write(rt2x00dev, 158, bbp); ++ rt2800_bbp_write(rt2x00dev, 159, idx1); ++ ++ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1); ++ ++ rt2x00_dbg(rt2x00dev, ++ "p0=%x, p1=%x, pwer_final=%x, idx0=%x, idx1=%x, iq_err=%x, gop=%d, ibit=%x\n", ++ p0, p1, pf, idx0, idx1, iq_err, gop, ibit); ++ ++ if (!(!first_search && pf <= p0 && pf < p1)) { ++ if (p0 < p1) { ++ pf = p0; ++ iq_err = idx0; ++ } else { ++ pf = p1; ++ iq_err = idx1; ++ } ++ } ++ ++ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 : ++ (gop == 0) ? 0x46 : 0x47; ++ ++ rt2800_bbp_write(rt2x00dev, 158, bbp); ++ rt2800_bbp_write(rt2x00dev, 159, iq_err); ++ ++ if (gop == 0) ++ gerr = iq_err; ++ else ++ perr = iq_err; ++ ++ rt2x00_dbg(rt2x00dev, "IQCalibration pf=%8x (%2x, %2x) !\n", ++ pf, gerr & 0x0F, perr & 0x3F); ++ } ++ } ++ ++ if (bidx > 0) ++ ibit = (ibit >> 1); ++ } ++ gerr = (gerr & 0x08) ? (gerr & 0x0F) - 0x10 : (gerr & 0x0F); ++ perr = (perr & 0x20) ? (perr & 0x3F) - 0x40 : (perr & 0x3F); ++ ++ gerr = (gerr < -0x07) ? -0x07 : (gerr > 0x05) ? 0x05 : gerr; ++ gsta = gerr - 1; ++ gend = gerr + 2; ++ ++ perr = (perr < -0x1f) ? -0x1f : (perr > 0x1d) ? 0x1d : perr; ++ psta = perr - 1; ++ pend = perr + 2; ++ ++ for (gef = gsta; gef <= gend; gef = gef + 1) ++ for (pef = psta; pef <= pend; pef = pef + 1) { ++ bbp = (ch_idx == 0) ? 0x28 : 0x46; ++ rt2800_bbp_write(rt2x00dev, 158, bbp); ++ rt2800_bbp_write(rt2x00dev, 159, gef & 0x0F); ++ ++ bbp = (ch_idx == 0) ? 0x29 : 0x47; ++ rt2800_bbp_write(rt2x00dev, 158, bbp); ++ rt2800_bbp_write(rt2x00dev, 159, pef & 0x3F); ++ ++ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1); ++ if (gef == gsta && pef == psta) { ++ pf = p1; ++ gerr = gef; ++ perr = pef; ++ } else if (pf > p1) { ++ pf = p1; ++ gerr = gef; ++ perr = pef; ++ } ++ rt2x00_dbg(rt2x00dev, "Fine IQCalibration p1=%8x pf=%8x (%2x, %2x) !\n", ++ p1, pf, gef & 0x0F, pef & 0x3F); ++ } ++ ++ ges[ch_idx] = gerr & 0x0F; ++ pes[ch_idx] = perr & 0x3F; ++} ++ ++static void rt2800_rf_aux_tx0_loopback(struct rt2x00_dev *rt2x00dev) ++{ ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x21); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, 0x10); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x1b); ++ rt2800_rfcsr_write_bank(rt2x00dev, 4, 0, 0x81); ++ rt2800_rfcsr_write_bank(rt2x00dev, 4, 2, 0x81); ++ rt2800_rfcsr_write_bank(rt2x00dev, 4, 34, 0xee); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, 0x2d); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, 0x2d); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, 0x80); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xd7); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0xa2); ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x20); ++} ++ ++static void rt2800_rf_aux_tx1_loopback(struct rt2x00_dev *rt2x00dev) ++{ ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x22); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, 0x20); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x4b); ++ rt2800_rfcsr_write_bank(rt2x00dev, 6, 0, 0x81); ++ rt2800_rfcsr_write_bank(rt2x00dev, 6, 2, 0x81); ++ rt2800_rfcsr_write_bank(rt2x00dev, 6, 34, 0xee); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 3, 0x2d); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, 0x2d); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 17, 0x80); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 18, 0xd7); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 19, 0xa2); ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 20, 0x20); ++} ++ ++static void rt2800_loft_iq_calibration(struct rt2x00_dev *rt2x00dev) ++{ ++ struct rf_reg_pair rf_store[CHAIN_NUM][13]; ++ u32 macorg1 = 0; ++ u32 macorg2 = 0; ++ u32 macorg3 = 0; ++ u32 macorg4 = 0; ++ u32 macorg5 = 0; ++ u32 orig528 = 0; ++ u32 orig52c = 0; ++ ++ u32 savemacsysctrl = 0; ++ u32 macvalue = 0; ++ u32 mac13b8 = 0; ++ u32 p0 = 0, p1 = 0; ++ u32 p0_idx10 = 0, p1_idx10 = 0; ++ ++ u8 rfvalue; ++ u8 loft_dc_search_result[CHAIN_NUM][RF_ALC_NUM][2]; ++ u8 ger[CHAIN_NUM], per[CHAIN_NUM]; ++ ++ u8 vga_gain[] = {14, 14}; ++ u8 bbp = 0, ch_idx = 0, rf_alc_idx = 0, idx = 0; ++ u8 bbpr30, rfb0r39, rfb0r42; ++ u8 bbpr1; ++ u8 bbpr4; ++ u8 bbpr241, bbpr242; ++ u8 count_step; ++ ++ static const u8 rf_gain[] = {0x00, 0x01, 0x02, 0x04, 0x08, 0x0c}; ++ static const u8 rfvga_gain_table[] = {0x24, 0x25, 0x26, 0x27, 0x28, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, ++ 0x31, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3F}; ++ static const u8 bbp_2324gain[] = {0x16, 0x14, 0x12, 0x10, 0x0c, 0x08}; ++ ++ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG); ++ macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0); ++ macorg3 = rt2800_register_read(rt2x00dev, RF_BYPASS0); ++ macorg4 = rt2800_register_read(rt2x00dev, RF_CONTROL3); ++ macorg5 = rt2800_register_read(rt2x00dev, RF_BYPASS3); ++ mac13b8 = rt2800_register_read(rt2x00dev, 0x13b8); ++ orig528 = rt2800_register_read(rt2x00dev, RF_CONTROL2); ++ orig52c = rt2800_register_read(rt2x00dev, RF_BYPASS2); ++ ++ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ macvalue &= (~0x04); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); ++ ++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX))) ++ rt2x00_warn(rt2x00dev, "RF TX busy in LOFT IQ calibration\n"); ++ ++ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ macvalue &= (~0x08); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); ++ ++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX))) ++ rt2x00_warn(rt2x00dev, "RF RX busy in LOFT IQ calibration\n"); ++ ++ for (ch_idx = 0; ch_idx < 2; ch_idx++) ++ rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx); ++ ++ bbpr30 = rt2800_bbp_read(rt2x00dev, 30); ++ rfb0r39 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 39); ++ rfb0r42 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); ++ ++ rt2800_bbp_write(rt2x00dev, 30, 0x1F); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 39, 0x80); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x5B); ++ ++ rt2800_bbp_write(rt2x00dev, 23, 0x00); ++ rt2800_bbp_write(rt2x00dev, 24, 0x00); ++ ++ rt2800_setbbptonegenerator(rt2x00dev); ++ ++ for (ch_idx = 0; ch_idx < 2; ch_idx++) { ++ rt2800_bbp_write(rt2x00dev, 23, 0x00); ++ rt2800_bbp_write(rt2x00dev, 24, 0x00); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00); ++ rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x0000000F); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003306); ++ rt2800_register_write(rt2x00dev, 0x13b8, 0x10); ++ udelay(1); ++ ++ if (ch_idx == 0) ++ rt2800_rf_aux_tx0_loopback(rt2x00dev); ++ else ++ rt2800_rf_aux_tx1_loopback(rt2x00dev); ++ ++ udelay(1); ++ ++ if (ch_idx == 0) ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001004); ++ else ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002004); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x05); ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x01); ++ if (ch_idx == 0) ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ else ++ rt2800_bbp_write(rt2x00dev, 159, 0x01); ++ ++ vga_gain[ch_idx] = 18; ++ for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) { ++ rt2800_bbp_write(rt2x00dev, 23, bbp_2324gain[rf_alc_idx]); ++ rt2800_bbp_write(rt2x00dev, 24, bbp_2324gain[rf_alc_idx]); ++ ++ macvalue = rt2800_register_read(rt2x00dev, RF_CONTROL3); ++ macvalue &= (~0x0000F1F1); ++ macvalue |= (rf_gain[rf_alc_idx] << 4); ++ macvalue |= (rf_gain[rf_alc_idx] << 12); ++ rt2800_register_write(rt2x00dev, RF_CONTROL3, macvalue); ++ macvalue = (0x0000F1F1); ++ rt2800_register_write(rt2x00dev, RF_BYPASS3, macvalue); ++ ++ if (rf_alc_idx == 0) { ++ rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x21); ++ for (; vga_gain[ch_idx] > 0; ++ vga_gain[ch_idx] = vga_gain[ch_idx] - 2) { ++ rfvalue = rfvga_gain_table[vga_gain[ch_idx]]; ++ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue); ++ rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x00); ++ rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x00); ++ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); ++ rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x21); ++ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); ++ rt2x00_dbg(rt2x00dev, "LOFT AGC %d %d\n", p0, p1); ++ if ((p0 < 7000 * 7000) && (p1 < (7000 * 7000))) ++ break; ++ } ++ ++ rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x00); ++ rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x00); ++ ++ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx], ++ rfvga_gain_table[vga_gain[ch_idx]]); ++ ++ if (vga_gain[ch_idx] < 0) ++ vga_gain[ch_idx] = 0; ++ } ++ ++ rfvalue = rfvga_gain_table[vga_gain[ch_idx]]; ++ ++ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue); ++ ++ rt2800_loft_search(rt2x00dev, ch_idx, rf_alc_idx, loft_dc_search_result); ++ } ++ } ++ ++ for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) { ++ for (idx = 0; idx < 4; idx++) { ++ rt2800_bbp_write(rt2x00dev, 158, 0xB0); ++ bbp = (idx << 2) + rf_alc_idx; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++ rt2x00_dbg(rt2x00dev, " ALC %2x,", bbp); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xb1); ++ bbp = loft_dc_search_result[CHAIN_0][rf_alc_idx][0x00]; ++ bbp = bbp & 0x3F; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++ rt2x00_dbg(rt2x00dev, " I0 %2x,", bbp); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xb2); ++ bbp = loft_dc_search_result[CHAIN_0][rf_alc_idx][0x01]; ++ bbp = bbp & 0x3F; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++ rt2x00_dbg(rt2x00dev, " Q0 %2x,", bbp); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xb8); ++ bbp = loft_dc_search_result[CHAIN_1][rf_alc_idx][0x00]; ++ bbp = bbp & 0x3F; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++ rt2x00_dbg(rt2x00dev, " I1 %2x,", bbp); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0xb9); ++ bbp = loft_dc_search_result[CHAIN_1][rf_alc_idx][0x01]; ++ bbp = bbp & 0x3F; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++ rt2x00_dbg(rt2x00dev, " Q1 %2x\n", bbp); ++ } ++ } ++ ++ rt2800_bbp_write(rt2x00dev, 23, 0x00); ++ rt2800_bbp_write(rt2x00dev, 24, 0x00); ++ ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x00); ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ ++ bbp = 0x00; ++ rt2800_bbp_write(rt2x00dev, 244, 0x00); ++ ++ rt2800_bbp_write(rt2x00dev, 21, 0x01); ++ udelay(1); ++ rt2800_bbp_write(rt2x00dev, 21, 0x00); ++ ++ rt2800_rf_configrecover(rt2x00dev, rf_store); ++ ++ rt2800_register_write(rt2x00dev, TX_PIN_CFG, macorg1); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, macorg2); ++ udelay(1); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, macorg3); ++ rt2800_register_write(rt2x00dev, RF_CONTROL3, macorg4); ++ rt2800_register_write(rt2x00dev, RF_BYPASS3, macorg5); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); ++ rt2800_register_write(rt2x00dev, RF_CONTROL2, orig528); ++ rt2800_register_write(rt2x00dev, RF_BYPASS2, orig52c); ++ rt2800_register_write(rt2x00dev, 0x13b8, mac13b8); ++ ++ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG); ++ macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0); ++ macorg3 = rt2800_register_read(rt2x00dev, RF_BYPASS0); ++ macorg4 = rt2800_register_read(rt2x00dev, RF_CONTROL3); ++ macorg5 = rt2800_register_read(rt2x00dev, RF_BYPASS3); ++ ++ bbpr1 = rt2800_bbp_read(rt2x00dev, 1); ++ bbpr4 = rt2800_bbp_read(rt2x00dev, 4); ++ bbpr241 = rt2800_bbp_read(rt2x00dev, 241); ++ bbpr242 = rt2800_bbp_read(rt2x00dev, 242); ++ mac13b8 = rt2800_register_read(rt2x00dev, 0x13b8); ++ ++ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ macvalue &= (~0x04); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); ++ ++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_TX))) ++ rt2x00_warn(rt2x00dev, "RF TX busy in LOFT IQ calibration\n"); ++ ++ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); ++ macvalue &= (~0x08); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); ++ ++ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX))) ++ rt2x00_warn(rt2x00dev, "RF RX busy in LOFT IQ calibration\n"); ++ ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { ++ rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x00000101); ++ rt2800_register_write(rt2x00dev, RF_BYPASS3, 0x0000F1F1); ++ } ++ ++ rt2800_bbp_write(rt2x00dev, 23, 0x00); ++ rt2800_bbp_write(rt2x00dev, 24, 0x00); ++ ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { ++ rt2800_bbp_write(rt2x00dev, 4, bbpr4 & (~0x18)); ++ rt2800_bbp_write(rt2x00dev, 21, 0x01); ++ udelay(1); ++ rt2800_bbp_write(rt2x00dev, 21, 0x00); ++ ++ rt2800_bbp_write(rt2x00dev, 241, 0x14); ++ rt2800_bbp_write(rt2x00dev, 242, 0x80); ++ rt2800_bbp_write(rt2x00dev, 244, 0x31); ++ } else { ++ rt2800_setbbptonegenerator(rt2x00dev); ++ } ++ ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003306); ++ udelay(1); ++ ++ rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x0000000F); ++ ++ if (!test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { ++ rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x00000000); ++ rt2800_register_write(rt2x00dev, RF_BYPASS3, 0x0000F1F1); ++ } ++ ++ rt2800_register_write(rt2x00dev, 0x13b8, 0x00000010); ++ ++ for (ch_idx = 0; ch_idx < 2; ch_idx++) ++ rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx); ++ ++ rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x3B); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x3B); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x03); ++ rt2800_bbp_write(rt2x00dev, 159, 0x60); ++ rt2800_bbp_write(rt2x00dev, 158, 0xB0); ++ rt2800_bbp_write(rt2x00dev, 159, 0x80); ++ ++ for (ch_idx = 0; ch_idx < 2; ch_idx++) { ++ rt2800_bbp_write(rt2x00dev, 23, 0x00); ++ rt2800_bbp_write(rt2x00dev, 24, 0x00); ++ ++ if (ch_idx == 0) { ++ rt2800_bbp_write(rt2x00dev, 158, 0x01); ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { ++ bbp = bbpr1 & (~0x18); ++ bbp = bbp | 0x00; ++ rt2800_bbp_write(rt2x00dev, 1, bbp); ++ } ++ rt2800_rf_aux_tx0_loopback(rt2x00dev); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001004); ++ } else { ++ rt2800_bbp_write(rt2x00dev, 158, 0x01); ++ rt2800_bbp_write(rt2x00dev, 159, 0x01); ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags)) { ++ bbp = bbpr1 & (~0x18); ++ bbp = bbp | 0x08; ++ rt2800_bbp_write(rt2x00dev, 1, bbp); ++ } ++ rt2800_rf_aux_tx1_loopback(rt2x00dev); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002004); ++ } ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x05); ++ rt2800_bbp_write(rt2x00dev, 159, 0x04); ++ ++ bbp = (ch_idx == 0) ? 0x28 : 0x46; ++ rt2800_bbp_write(rt2x00dev, 158, bbp); ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { ++ rt2800_bbp_write(rt2x00dev, 23, 0x06); ++ rt2800_bbp_write(rt2x00dev, 24, 0x06); ++ count_step = 1; ++ } else { ++ rt2800_bbp_write(rt2x00dev, 23, 0x1F); ++ rt2800_bbp_write(rt2x00dev, 24, 0x1F); ++ count_step = 2; ++ } ++ ++ for (; vga_gain[ch_idx] < 19; vga_gain[ch_idx] = (vga_gain[ch_idx] + count_step)) { ++ rfvalue = rfvga_gain_table[vga_gain[ch_idx]]; ++ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue); ++ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue); ++ ++ bbp = (ch_idx == 0) ? 0x29 : 0x47; ++ rt2800_bbp_write(rt2x00dev, 158, bbp); ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0); ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) ++ p0_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A); ++ ++ bbp = (ch_idx == 0) ? 0x29 : 0x47; ++ rt2800_bbp_write(rt2x00dev, 158, bbp); ++ rt2800_bbp_write(rt2x00dev, 159, 0x21); ++ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0); ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags)) ++ p1_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A); ++ ++ rt2x00_dbg(rt2x00dev, "IQ AGC %d %d\n", p0, p1); ++ ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { ++ rt2x00_dbg(rt2x00dev, "IQ AGC IDX 10 %d %d\n", p0_idx10, p1_idx10); ++ if ((p0_idx10 > 7000 * 7000) || (p1_idx10 > 7000 * 7000)) { ++ if (vga_gain[ch_idx] != 0) ++ vga_gain[ch_idx] = vga_gain[ch_idx] - 1; ++ break; ++ } ++ } ++ ++ if ((p0 > 2500 * 2500) || (p1 > 2500 * 2500)) ++ break; ++ } ++ ++ if (vga_gain[ch_idx] > 18) ++ vga_gain[ch_idx] = 18; ++ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx], ++ rfvga_gain_table[vga_gain[ch_idx]]); ++ ++ bbp = (ch_idx == 0) ? 0x29 : 0x47; ++ rt2800_bbp_write(rt2x00dev, 158, bbp); ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ ++ rt2800_iq_search(rt2x00dev, ch_idx, ger, per); ++ } ++ ++ rt2800_bbp_write(rt2x00dev, 23, 0x00); ++ rt2800_bbp_write(rt2x00dev, 24, 0x00); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x28); ++ bbp = ger[CHAIN_0] & 0x0F; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x29); ++ bbp = per[CHAIN_0] & 0x3F; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x46); ++ bbp = ger[CHAIN_1] & 0x0F; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x47); ++ bbp = per[CHAIN_1] & 0x3F; ++ rt2800_bbp_write(rt2x00dev, 159, bbp); ++ ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { ++ rt2800_bbp_write(rt2x00dev, 1, bbpr1); ++ rt2800_bbp_write(rt2x00dev, 241, bbpr241); ++ rt2800_bbp_write(rt2x00dev, 242, bbpr242); ++ } ++ rt2800_bbp_write(rt2x00dev, 244, 0x00); ++ ++ rt2800_bbp_write(rt2x00dev, 158, 0x00); ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ rt2800_bbp_write(rt2x00dev, 158, 0xB0); ++ rt2800_bbp_write(rt2x00dev, 159, 0x00); ++ ++ rt2800_bbp_write(rt2x00dev, 30, bbpr30); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 39, rfb0r39); ++ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfb0r42); ++ ++ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) ++ rt2800_bbp_write(rt2x00dev, 4, bbpr4); ++ ++ rt2800_bbp_write(rt2x00dev, 21, 0x01); ++ udelay(1); ++ rt2800_bbp_write(rt2x00dev, 21, 0x00); ++ ++ rt2800_rf_configrecover(rt2x00dev, rf_store); ++ ++ rt2800_register_write(rt2x00dev, TX_PIN_CFG, macorg1); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00); ++ rt2800_register_write(rt2x00dev, RF_CONTROL0, macorg2); ++ udelay(1); ++ rt2800_register_write(rt2x00dev, RF_BYPASS0, macorg3); ++ rt2800_register_write(rt2x00dev, RF_CONTROL3, macorg4); ++ rt2800_register_write(rt2x00dev, RF_BYPASS3, macorg5); ++ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); ++ rt2800_register_write(rt2x00dev, 0x13b8, mac13b8); ++} ++ + static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, + bool set_bw, bool is_ht40) + { +@@ -9653,6 +10554,7 @@ static void rt2800_init_rfcsr_6352(struc + rt2800_rxdcoc_calibration(rt2x00dev); + rt2800_bw_filter_calibration(rt2x00dev, true); + rt2800_bw_filter_calibration(rt2x00dev, false); ++ rt2800_loft_iq_calibration(rt2x00dev); + rt2800_rxiq_calibration(rt2x00dev); + } + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h +@@ -17,6 +17,16 @@ + #define WCID_START 33 + #define WCID_END 222 + #define STA_IDS_SIZE (WCID_END - WCID_START + 2) ++#define CHAIN_0 0x0 ++#define CHAIN_1 0x1 ++#define RF_ALC_NUM 6 ++#define CHAIN_NUM 2 ++ ++struct rf_reg_pair { ++ u8 bank; ++ u8 reg; ++ u8 value; ++}; + + /* RT2800 driver data structure */ + struct rt2800_drv_data { diff --git a/package/kernel/mac80211/patches/rt2x00/011-rt2x00-move-helper-functions-up-in-file.patch b/package/kernel/mac80211/patches/rt2x00/011-rt2x00-move-helper-functions-up-in-file.patch new file mode 100644 index 0000000000..07a32b17be --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/011-rt2x00-move-helper-functions-up-in-file.patch @@ -0,0 +1,94 @@ +From patchwork Sat Sep 17 20:28:58 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979252 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:28:58 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 11/16] rt2x00: move helper functions up in file +Message-ID: + +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +Move register access helper functions up to the head of the file so +they can be used in all functions. + +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- + .../net/wireless/ralink/rt2x00/rt2800lib.c | 40 +++++++++---------- + 1 file changed, 20 insertions(+), 20 deletions(-) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -198,6 +198,26 @@ static void rt2800_rfcsr_write_dccal(str + rt2800_rfcsr_write_bank(rt2x00dev, 7, reg, value); + } + ++static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev, ++ const u8 reg, const u8 value) ++{ ++ rt2800_bbp_write(rt2x00dev, 158, reg); ++ rt2800_bbp_write(rt2x00dev, 159, value); ++} ++ ++static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg) ++{ ++ rt2800_bbp_write(rt2x00dev, 158, reg); ++ return rt2800_bbp_read(rt2x00dev, 159); ++} ++ ++static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev, ++ const u8 reg, const u8 value) ++{ ++ rt2800_bbp_write(rt2x00dev, 195, reg); ++ rt2800_bbp_write(rt2x00dev, 196, value); ++} ++ + static u8 rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev, + const unsigned int word) + { +@@ -6947,26 +6967,6 @@ static void rt2800_init_bbp_5592(struct + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + } + +-static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev, +- const u8 reg, const u8 value) +-{ +- rt2800_bbp_write(rt2x00dev, 195, reg); +- rt2800_bbp_write(rt2x00dev, 196, value); +-} +- +-static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev, +- const u8 reg, const u8 value) +-{ +- rt2800_bbp_write(rt2x00dev, 158, reg); +- rt2800_bbp_write(rt2x00dev, 159, value); +-} +- +-static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg) +-{ +- rt2800_bbp_write(rt2x00dev, 158, reg); +- return rt2800_bbp_read(rt2x00dev, 159); +-} +- + static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev) + { + u8 bbp; diff --git a/package/kernel/mac80211/patches/rt2x00/012-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/012-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch new file mode 100644 index 0000000000..e989205ba2 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/012-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch @@ -0,0 +1,56 @@ +From patchwork Sat Sep 17 20:29:13 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979253 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:29:13 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 12/16] rt2x00: fix HT20/HT40 bandwidth switch on MT7620 +Message-ID: + <1664d89ba149f7b0bcec18b2a2abaedf49654507.1663445157.git.daniel@makrotopia.org> +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +Add missing configuration of the channel bandwidth filter to the +channel setup function for MT7620. + +Reported-by: Serge Vasilugin +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -3855,6 +3855,14 @@ static void rt2800_config_channel_rf7620 + rfcsr |= tx_agc_fc; + rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr); + } ++ ++ if (conf_is_ht40(conf)) { ++ rt2800_bbp_glrt_write(rt2x00dev, 141, 0x10); ++ rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2f); ++ } else { ++ rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1a); ++ rt2800_bbp_glrt_write(rt2x00dev, 157, 0x40); ++ } + } + + static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev, diff --git a/package/kernel/mac80211/patches/rt2x00/013-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/013-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT7620.patch new file mode 100644 index 0000000000..3d7af17b16 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/013-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT7620.patch @@ -0,0 +1,52 @@ +From patchwork Sat Sep 17 20:29:26 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979254 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:29:26 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 13/16] rt2x00: set correct TX_SW_CFG1 MAC register for + MT7620 +Message-ID: + <4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org> +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the +vendor driver[1]. + +[1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 +Reported-by: Serge Vasilugin +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -5966,7 +5966,7 @@ static int rt2800_init_registers(struct + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); + } else if (rt2x00_rt(rt2x00dev, RT6352)) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401); +- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000); ++ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000); + rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0); diff --git a/package/kernel/mac80211/patches/rt2x00/014-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/014-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch new file mode 100644 index 0000000000..27b8d92cd2 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/014-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch @@ -0,0 +1,50 @@ +From patchwork Sat Sep 17 20:29:40 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979255 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:29:40 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 14/16] rt2x00: set VGC gain for both chains of MT7620 +Message-ID: + <29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org> +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +Set bbp66 for all chains of the MT7620. + +Reported-by: Serge Vasilugin +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -5743,7 +5743,8 @@ static inline void rt2800_set_vgc(struct + if (qual->vgc_level != vgc_level) { + if (rt2x00_rt(rt2x00dev, RT3572) || + rt2x00_rt(rt2x00dev, RT3593) || +- rt2x00_rt(rt2x00dev, RT3883)) { ++ rt2x00_rt(rt2x00dev, RT3883) || ++ rt2x00_rt(rt2x00dev, RT6352)) { + rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, + vgc_level); + } else if (rt2x00_rt(rt2x00dev, RT5592)) { diff --git a/package/kernel/mac80211/patches/rt2x00/015-rt2x00-set-SoC-wmac-clock-register.patch b/package/kernel/mac80211/patches/rt2x00/015-rt2x00-set-SoC-wmac-clock-register.patch new file mode 100644 index 0000000000..3cadc91da6 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/015-rt2x00-set-SoC-wmac-clock-register.patch @@ -0,0 +1,70 @@ +From patchwork Sat Sep 17 20:29:55 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979256 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +Date: Sat, 17 Sep 2022 21:29:55 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 15/16] rt2x00: set SoC wmac clock register +Message-ID: + <3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org> +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +Instead of using the default value 33 (pci), set US_CYC_CNT init based +on Programming guide: +If available, set chipset bus clock with fallback to cpu clock/3. + +Reported-by: Serge Vasilugin +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- + .../net/wireless/ralink/rt2x00/rt2800lib.c | 21 +++++++++++++++++++ + 1 file changed, 21 insertions(+) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -6229,6 +6229,27 @@ static int rt2800_init_registers(struct + reg = rt2800_register_read(rt2x00dev, US_CYC_CNT); + rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 125); + rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); ++ } else if (rt2x00_is_soc(rt2x00dev)) { ++ struct clk *clk = clk_get_sys("bus", NULL); ++ int rate; ++ ++ if (IS_ERR(clk)) { ++ clk = clk_get_sys("cpu", NULL); ++ ++ if (IS_ERR(clk)) { ++ rate = 125; ++ } else { ++ rate = clk_get_rate(clk) / 3000000; ++ clk_put(clk); ++ } ++ } else { ++ rate = clk_get_rate(clk) / 1000000; ++ clk_put(clk); ++ } ++ ++ reg = rt2800_register_read(rt2x00dev, US_CYC_CNT); ++ rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, rate); ++ rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); + } + + reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0); diff --git a/package/kernel/mac80211/patches/rt2x00/016-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/016-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch new file mode 100644 index 0000000000..5ddbbf1dd6 --- /dev/null +++ b/package/kernel/mac80211/patches/rt2x00/016-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch @@ -0,0 +1,79 @@ +From patchwork Sat Sep 17 20:30:09 2022 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +X-Patchwork-Submitter: Daniel Golle +X-Patchwork-Id: 12979257 +X-Patchwork-Delegate: kvalo@adurom.com +Return-Path: +X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on + aws-us-west-2-korg-lkml-1.web.codeaurora.org +Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) + by smtp.lore.kernel.org (Postfix) with ESMTP id E9118ECAAA1 + for ; + Sat, 17 Sep 2022 20:30:22 +0000 (UTC) +Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand + id S229639AbiIQUaV (ORCPT + ); + Sat, 17 Sep 2022 16:30:21 -0400 +Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53912 "EHLO + lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org + with ESMTP id S229628AbiIQUaT (ORCPT + ); + Sat, 17 Sep 2022 16:30:19 -0400 +Received: from fudo.makrotopia.org (fudo.makrotopia.org + [IPv6:2a07:2ec0:3002::71]) + by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1AEA822B27 + for ; + Sat, 17 Sep 2022 13:30:16 -0700 (PDT) +Received: from local + by fudo.makrotopia.org with esmtpsa + (TLS1.3:TLS_AES_256_GCM_SHA384:256) + (Exim 4.96) + (envelope-from ) + id 1oZeS7-0003ra-0k; + Sat, 17 Sep 2022 22:30:15 +0200 +Date: Sat, 17 Sep 2022 21:30:09 +0100 +From: Daniel Golle +To: linux-wireless@vger.kernel.org, Stanislaw Gruszka , + Helmut Schaa +Cc: Kalle Valo , + "David S. Miller" , + Eric Dumazet , + Jakub Kicinski , + Paolo Abeni , + Johannes Berg +Subject: [PATCH v3 16/16] rt2x00: correctly set BBP register 86 for MT7620 +Message-ID: + <257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org> +References: +MIME-Version: 1.0 +Content-Disposition: inline +In-Reply-To: +Precedence: bulk +List-ID: +X-Mailing-List: linux-wireless@vger.kernel.org + +Instead of 0 set the correct value for BBP register 86 for MT7620. + +Reported-by: Serge Vasilugin +Signed-off-by: Daniel Golle +Acked-by: Stanislaw Gruszka +--- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -4225,7 +4225,10 @@ static void rt2800_config_channel(struct + rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); +- rt2800_bbp_write(rt2x00dev, 86, 0); ++ if (rt2x00_rt(rt2x00dev, RT6352)) ++ rt2800_bbp_write(rt2x00dev, 86, 0x38); ++ else ++ rt2800_bbp_write(rt2x00dev, 86, 0); + } + + if (rf->channel <= 14) { diff --git a/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch b/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch index 21ed9882b0..ba16e85510 100644 --- a/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch +++ b/package/kernel/mac80211/patches/rt2x00/602-rt2x00-introduce-rt2x00eeprom.patch @@ -48,7 +48,7 @@ obj-$(CPTCFG_RT2X00_LIB_MMIO) += rt2x00mmio.o --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -@@ -37,6 +37,8 @@ struct rt2800_drv_data { +@@ -47,6 +47,8 @@ struct rt2800_drv_data { struct ieee80211_sta *wcid_to_sta[STA_IDS_SIZE]; }; @@ -57,7 +57,7 @@ struct rt2800_ops { u32 (*register_read)(struct rt2x00_dev *rt2x00dev, const unsigned int offset); -@@ -135,6 +137,15 @@ static inline int rt2800_read_eeprom(str +@@ -145,6 +147,15 @@ static inline int rt2800_read_eeprom(str { const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; @@ -127,7 +127,7 @@ DECLARE_KFIFO_PTR(txstatus_fifo, u32); --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1401,6 +1401,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de +@@ -1419,6 +1419,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup); INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep); @@ -138,7 +138,7 @@ /* * Let the driver probe the device to detect the capabilities. */ -@@ -1541,6 +1545,11 @@ void rt2x00lib_remove_dev(struct rt2x00_ +@@ -1559,6 +1563,11 @@ void rt2x00lib_remove_dev(struct rt2x00_ * Free the driver data. */ kfree(rt2x00dev->drv_data); diff --git a/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch b/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch index d78b76d7f5..acc8a8edb8 100644 --- a/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch +++ b/package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch @@ -8,7 +8,7 @@ #include "rt2x00.h" #include "rt2800lib.h" -@@ -9549,6 +9550,17 @@ static int rt2800_init_eeprom(struct rt2 +@@ -11131,6 +11132,17 @@ static int rt2800_init_eeprom(struct rt2 rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); diff --git a/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch b/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch index 0da9356e0c..5ef5fc8def 100644 --- a/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch +++ b/package/kernel/mac80211/patches/rt2x00/611-rt2x00-add-AP+STA-support.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1340,7 +1340,7 @@ static inline void rt2x00lib_set_if_comb +@@ -1358,7 +1358,7 @@ static inline void rt2x00lib_set_if_comb */ if_limit = &rt2x00dev->if_limits_ap; if_limit->max = rt2x00dev->ops->max_ap_intf; diff --git a/package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch b/package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch deleted file mode 100644 index c9cada6dbd..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/612-rt2x00-add-throughput-LED-trigger.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 208be6e22eba13408a0a3eb4c02256bc9ddfaf48 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 16 Dec 2019 20:47:06 +0100 -Subject: [PATCH 02/16] rt2x00: add throughput LED trigger -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -From: David Bauer - -This adds a (currently missing) throughput LED trigger for the rt2x00 -driver. Previously, LED triggers had to be assigned to the netdev, which -was limited to a single VAP. - -Tested-by: Christoph Krapp -Signed-off-by: David Bauer ---- - drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1125,6 +1125,19 @@ static void rt2x00lib_remove_hw(struct r - kfree(rt2x00dev->spec.channels_info); - } - -+static const struct ieee80211_tpt_blink rt2x00_tpt_blink[] = { -+ { .throughput = 0 * 1024, .blink_time = 334 }, -+ { .throughput = 1 * 1024, .blink_time = 260 }, -+ { .throughput = 2 * 1024, .blink_time = 220 }, -+ { .throughput = 5 * 1024, .blink_time = 190 }, -+ { .throughput = 10 * 1024, .blink_time = 170 }, -+ { .throughput = 25 * 1024, .blink_time = 150 }, -+ { .throughput = 54 * 1024, .blink_time = 130 }, -+ { .throughput = 120 * 1024, .blink_time = 110 }, -+ { .throughput = 265 * 1024, .blink_time = 80 }, -+ { .throughput = 586 * 1024, .blink_time = 50 }, -+}; -+ - static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) - { - struct hw_mode_spec *spec = &rt2x00dev->spec; -@@ -1206,6 +1219,11 @@ static int rt2x00lib_probe_hw(struct rt2 - - #undef RT2X00_TASKLET_INIT - -+ ieee80211_create_tpt_led_trigger(rt2x00dev->hw, -+ IEEE80211_TPT_LEDTRIG_FL_RADIO, -+ rt2x00_tpt_blink, -+ ARRAY_SIZE(rt2x00_tpt_blink)); -+ - /* - * Register HW. - */ diff --git a/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch deleted file mode 100644 index fe023cf77a..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 8dcdb02e3ad5f3d384c071e0a36670bb342bab35 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Wed, 19 Apr 2017 16:14:53 +0200 -Subject: [PATCH 03/16] rt2x00: add support for external PA on MT7620 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -Implement support for external PA connected to MT7620A. - -Signed-off-by: Tomislav Požega -[pozega.tomislav@gmail.com: use chanreg and dccal helpers.] -Signed-off-by: Daniel Golle ---- - drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 + - .../net/wireless/ralink/rt2x00/rt2800lib.c | 52 ++++++++++++++++++- - 2 files changed, 52 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h -@@ -2739,6 +2739,7 @@ enum rt2800_eeprom_word { - #define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f) - #define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0) - #define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600) -+#define EEPROM_NIC_CONF2_EXTERNAL_PA FIELD16(0x8000) - - /* - * EEPROM LNA ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -4369,6 +4369,43 @@ static void rt2800_config_channel(struct - rt2800_iq_calibrate(rt2x00dev, rf->channel); - } - -+ if (rt2x00_rt(rt2x00dev, RT6352)) { -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, -+ &rt2x00dev->cap_flags)) { -+ reg = rt2800_register_read(rt2x00dev, RF_CONTROL3); -+ reg |= 0x00000101; -+ rt2800_register_write(rt2x00dev, RF_CONTROL3, reg); -+ -+ reg = rt2800_register_read(rt2x00dev, RF_BYPASS3); -+ reg |= 0x00000101; -+ rt2800_register_write(rt2x00dev, RF_BYPASS3, reg); -+ -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0x73); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0x73); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0x73); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0xC8); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xA4); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x05); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x27); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0xC8); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xA4); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x05); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x27); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0xC8); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xA4); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x05); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 05, 0x00); -+ -+ rt2800_register_write(rt2x00dev, TX0_RF_GAIN_CORRECT, -+ 0x36303636); -+ rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN, -+ 0x6C6C6B6C); -+ rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN, -+ 0x6C6C6B6C); -+ } -+ } -+ - bbp = rt2800_bbp_read(rt2x00dev, 4); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); - rt2800_bbp_write(rt2x00dev, 4, bbp); -@@ -9578,7 +9615,8 @@ static int rt2800_init_eeprom(struct rt2 - */ - eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); - -- if (rt2x00_rt(rt2x00dev, RT3352)) { -+ if (rt2x00_rt(rt2x00dev, RT3352) || -+ rt2x00_rt(rt2x00dev, RT6352)) { - if (rt2x00_get_field16(eeprom, - EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352)) - __set_bit(CAPABILITY_EXTERNAL_PA_TX0, -@@ -9589,6 +9627,18 @@ static int rt2800_init_eeprom(struct rt2 - &rt2x00dev->cap_flags); - } - -+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2); -+ -+ if (rt2x00_rt(rt2x00dev, RT6352) && eeprom != 0 && eeprom != 0xffff) { -+ if (!rt2x00_get_field16(eeprom, -+ EEPROM_NIC_CONF2_EXTERNAL_PA)) { -+ __clear_bit(CAPABILITY_EXTERNAL_PA_TX0, -+ &rt2x00dev->cap_flags); -+ __clear_bit(CAPABILITY_EXTERNAL_PA_TX1, -+ &rt2x00dev->cap_flags); -+ } -+ } -+ - return 0; - } - diff --git a/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-RF-self-TXDC-calibration.patch b/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-RF-self-TXDC-calibration.patch deleted file mode 100644 index ed8a737a4c..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-RF-self-TXDC-calibration.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 21f2acf0f9e9da35fbdb96ee0aea97b02472030b Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 8 Jan 2018 13:42:27 +0100 -Subject: [PATCH 04/16] rt2x00: add RF self TXDC calibration for MT7620 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -From: Tomislav Požega - -Add TX self calibration based on mtk driver. - -Signed-off-by: Tomislav Požega ---- - .../net/wireless/ralink/rt2x00/rt2800lib.c | 48 +++++++++++++++++++ - 1 file changed, 48 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8436,6 +8436,53 @@ static void rt2800_init_rfcsr_5592(struc - rt2800_led_open_drain_enable(rt2x00dev); - } - -+static void rt2800_rf_self_txdc_cal(struct rt2x00_dev *rt2x00dev) -+{ -+ u8 rfb5r1_org, rfb7r1_org, rfvalue; -+ u32 mac0518, mac051c, mac0528, mac052c; -+ u8 i; -+ -+ mac0518 = rt2800_register_read(rt2x00dev, RF_CONTROL0); -+ mac051c = rt2800_register_read(rt2x00dev, RF_BYPASS0); -+ mac0528 = rt2800_register_read(rt2x00dev, RF_CONTROL2); -+ mac052c = rt2800_register_read(rt2x00dev, RF_BYPASS2); -+ -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0); -+ rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0); -+ -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0xC); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x3306); -+ rt2800_register_write(rt2x00dev, RF_CONTROL2, 0x3330); -+ rt2800_register_write(rt2x00dev, RF_BYPASS2, 0xfffff); -+ rfb5r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1); -+ rfb7r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, 0x4); -+ for (i = 0; i < 100; i = i + 1) { -+ usleep_range(50, 100); -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1); -+ if ((rfvalue & 0x04) != 0x4) -+ break; -+ } -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rfb5r1_org); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, 0x4); -+ for (i = 0; i < 100; i = i + 1) { -+ usleep_range(50, 100); -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1); -+ if ((rfvalue & 0x04) != 0x4) -+ break; -+ } -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, rfb7r1_org); -+ -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0); -+ rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, mac0518); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, mac051c); -+ rt2800_register_write(rt2x00dev, RF_CONTROL2, mac0528); -+ rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c); -+} -+ - static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, - bool set_bw, bool is_ht40) - { -@@ -9043,6 +9090,7 @@ static void rt2800_init_rfcsr_6352(struc - rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00); - rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C); - -+ rt2800_rf_self_txdc_cal(rt2x00dev); - rt2800_bw_filter_calibration(rt2x00dev, true); - rt2800_bw_filter_calibration(rt2x00dev, false); - } diff --git a/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch b/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch deleted file mode 100644 index 569b1083e5..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch +++ /dev/null @@ -1,192 +0,0 @@ -From b75efecd6473e6a044d214571c17cad8ae88ed42 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 8 Jan 2018 13:42:58 +0100 -Subject: [PATCH 05/16] rt2x00: add r calibration for MT7620 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -From: Tomislav Požega - -Add r calibration code as found in mtk driver. - -Signed-off-by: Tomislav Požega ---- - .../net/wireless/ralink/rt2x00/rt2800lib.c | 150 ++++++++++++++++++ - 1 file changed, 150 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8483,6 +8483,155 @@ static void rt2800_rf_self_txdc_cal(stru - rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c); - } - -+static int rt2800_calcrcalibrationcode(struct rt2x00_dev *rt2x00dev, int d1, int d2) -+{ -+ int calcode = ((d2 - d1) * 1000) / 43; -+ -+ if ((calcode % 10) >= 5) -+ calcode += 10; -+ calcode = (calcode / 10); -+ -+ return calcode; -+} -+ -+static void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev) -+{ -+ u32 savemacsysctrl; -+ u8 saverfb0r1, saverfb0r34, saverfb0r35; -+ u8 saverfb5r4, saverfb5r17, saverfb5r18; -+ u8 saverfb5r19, saverfb5r20; -+ u8 savebbpr22, savebbpr47, savebbpr49; -+ u8 bytevalue = 0; -+ int rcalcode; -+ u8 r_cal_code = 0; -+ char d1 = 0, d2 = 0; -+ u8 rfvalue; -+ u32 MAC_RF_BYPASS0, MAC_RF_CONTROL0, MAC_PWR_PIN_CFG; -+ u32 maccfg, macstatus; -+ int i; -+ -+ saverfb0r1 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); -+ saverfb0r34 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 34); -+ saverfb0r35 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35); -+ saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); -+ saverfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); -+ saverfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18); -+ saverfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19); -+ saverfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20); -+ -+ savebbpr22 = rt2800_bbp_read(rt2x00dev, 22); -+ savebbpr47 = rt2800_bbp_read(rt2x00dev, 47); -+ savebbpr49 = rt2800_bbp_read(rt2x00dev, 49); -+ -+ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ MAC_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0); -+ MAC_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0); -+ MAC_PWR_PIN_CFG = rt2800_register_read(rt2x00dev, PWR_PIN_CFG); -+ -+ maccfg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ maccfg &= (~0x04); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg); -+ -+ for (i = 0; i < 10000; i++) { -+ macstatus = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); -+ if (macstatus & 0x1) -+ usleep_range(50, 100); -+ else -+ break; -+ } -+ -+ if (i == 10000) -+ rt2x00_warn(rt2x00dev, "Wait MAC Tx Status to MAX !!!\n"); -+ -+ maccfg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ maccfg &= (~0x04); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg); -+ -+ for (i = 0; i < 10000; i++) { -+ macstatus = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); -+ if (macstatus & 0x2) -+ usleep_range(50, 100); -+ else -+ break; -+ } -+ -+ if (i == 10000) -+ rt2x00_warn(rt2x00dev, "Wait MAC Rx Status to MAX !!!\n"); -+ -+ rfvalue = (MAC_RF_BYPASS0 | 0x3004); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, rfvalue); -+ rfvalue = (MAC_RF_CONTROL0 | (~0x3002)); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, rfvalue); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, 0x27); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, 0x80); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0x83); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x00); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x20); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x00); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 34, 0x13); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00); -+ -+ rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x1); -+ -+ rt2800_bbp_write(rt2x00dev, 47, 0x04); -+ rt2800_bbp_write(rt2x00dev, 22, 0x80); -+ usleep_range(100, 200); -+ bytevalue = rt2800_bbp_read(rt2x00dev, 49); -+ if (bytevalue > 128) -+ d1 = bytevalue - 256; -+ else -+ d1 = (char)bytevalue; -+ rt2800_bbp_write(rt2x00dev, 22, 0x0); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x01); -+ -+ rt2800_bbp_write(rt2x00dev, 22, 0x80); -+ usleep_range(100, 200); -+ bytevalue = rt2800_bbp_read(rt2x00dev, 49); -+ if (bytevalue > 128) -+ d2 = bytevalue - 256; -+ else -+ d2 = (char)bytevalue; -+ rt2800_bbp_write(rt2x00dev, 22, 0x0); -+ -+ rcalcode = rt2800_calcrcalibrationcode(rt2x00dev, d1, d2); -+ if (rcalcode < 0) -+ r_cal_code = 256 + rcalcode; -+ else -+ r_cal_code = (u8)rcalcode; -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 7, r_cal_code); -+ -+ rt2800_bbp_write(rt2x00dev, 22, 0x0); -+ -+ bytevalue = rt2800_bbp_read(rt2x00dev, 21); -+ bytevalue |= 0x1; -+ rt2800_bbp_write(rt2x00dev, 21, bytevalue); -+ bytevalue = rt2800_bbp_read(rt2x00dev, 21); -+ bytevalue &= (~0x1); -+ rt2800_bbp_write(rt2x00dev, 21, bytevalue); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, saverfb0r1); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 34, saverfb0r34); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, saverfb0r35); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r4); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, saverfb5r17); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, saverfb5r18); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, saverfb5r19); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, saverfb5r20); -+ -+ rt2800_bbp_write(rt2x00dev, 22, savebbpr22); -+ rt2800_bbp_write(rt2x00dev, 47, savebbpr47); -+ rt2800_bbp_write(rt2x00dev, 49, savebbpr49); -+ -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, MAC_RF_BYPASS0); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, MAC_RF_CONTROL0); -+ -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); -+ rt2800_register_write(rt2x00dev, PWR_PIN_CFG, MAC_PWR_PIN_CFG); -+} -+ - static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, - bool set_bw, bool is_ht40) - { -@@ -9090,6 +9239,7 @@ static void rt2800_init_rfcsr_6352(struc - rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00); - rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C); - -+ rt2800_r_calibration(rt2x00dev); - rt2800_rf_self_txdc_cal(rt2x00dev); - rt2800_bw_filter_calibration(rt2x00dev, true); - rt2800_bw_filter_calibration(rt2x00dev, false); diff --git a/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-RXDCOC-calibration.patch b/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-RXDCOC-calibration.patch deleted file mode 100644 index fa732c97a6..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/984-rt2x00-add-RXDCOC-calibration.patch +++ /dev/null @@ -1,109 +0,0 @@ -From 865823b63f608ac024d326a465ba8fc1a28868cd Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 8 Jan 2018 13:43:37 +0100 -Subject: [PATCH 06/16] rt2x00: add RXDCOC calibration for MT7620 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -From: Tomislav Požega - -Add RXDCOC calibration code from mtk driver. - -Signed-off-by: Daniel Golle -[fixed typo reported by Serge Vasilugin ] -Signed-off-by: Tomislav Požega ---- - .../net/wireless/ralink/rt2x00/rt2800lib.c | 65 +++++++++++++++++++ - 1 file changed, 65 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8632,6 +8632,70 @@ static void rt2800_r_calibration(struct - rt2800_register_write(rt2x00dev, PWR_PIN_CFG, MAC_PWR_PIN_CFG); - } - -+static void rt2800_rxdcoc_calibration(struct rt2x00_dev *rt2x00dev) -+{ -+ u8 bbpreg = 0; -+ u32 macvalue = 0, macvalue1 = 0; -+ u8 saverfb0r2, saverfb5r4, saverfb7r4, rfvalue; -+ int i; -+ -+ saverfb0r2 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); -+ rfvalue = saverfb0r2; -+ rfvalue |= 0x03; -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfvalue); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 141); -+ bbpreg = rt2800_bbp_read(rt2x00dev, 159); -+ bbpreg |= 0x10; -+ rt2800_bbp_write(rt2x00dev, 159, bbpreg); -+ -+ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x8); -+ -+ for (i = 0; i < 10000; i++) { -+ macvalue1 = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); -+ if (macvalue1 & 0x1) -+ usleep_range(50, 100); -+ else -+ break; -+ } -+ -+ saverfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); -+ saverfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4); -+ saverfb5r4 = saverfb5r4 & (~0x40); -+ saverfb7r4 = saverfb7r4 & (~0x40); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x64); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r4); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, saverfb7r4); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 141); -+ bbpreg = rt2800_bbp_read(rt2x00dev, 159); -+ bbpreg = bbpreg & (~0x40); -+ rt2800_bbp_write(rt2x00dev, 159, bbpreg); -+ bbpreg |= 0x48; -+ rt2800_bbp_write(rt2x00dev, 159, bbpreg); -+ -+ for (i = 0; i < 10000; i++) { -+ bbpreg = rt2800_bbp_read(rt2x00dev, 159); -+ if ((bbpreg & 0x40) == 0) -+ break; -+ usleep_range(50, 100); -+ } -+ -+ bbpreg = rt2800_bbp_read(rt2x00dev, 159); -+ bbpreg = bbpreg & (~0x40); -+ rt2800_bbp_write(rt2x00dev, 159, bbpreg); -+ -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 141); -+ bbpreg = rt2800_bbp_read(rt2x00dev, 159); -+ bbpreg &= (~0x10); -+ rt2800_bbp_write(rt2x00dev, 159, bbpreg); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, saverfb0r2); -+} -+ - static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, - bool set_bw, bool is_ht40) - { -@@ -9241,6 +9305,7 @@ static void rt2800_init_rfcsr_6352(struc - - rt2800_r_calibration(rt2x00dev); - rt2800_rf_self_txdc_cal(rt2x00dev); -+ rt2800_rxdcoc_calibration(rt2x00dev); - rt2800_bw_filter_calibration(rt2x00dev, true); - rt2800_bw_filter_calibration(rt2x00dev, false); - } diff --git a/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-RXIQ-calibration.patch b/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-RXIQ-calibration.patch deleted file mode 100644 index 59dbd1f506..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/985-rt2x00-add-RXIQ-calibration.patch +++ /dev/null @@ -1,427 +0,0 @@ -From 38b78ba60f6759968b19fe183a344a8612fef694 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 8 Jan 2018 13:43:56 +0100 -Subject: [PATCH 07/16] rt2x00: add RXIQ calibration for MT7620 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -From: Tomislav Požega - -Add RXIQ calibration found in mtk driver. With old openwrt builds this -gets us ~8Mbps more of RX bandwidth (test with iPA/eLNA layout). - -Signed-off-by: Tomislav Požega ---- - .../net/wireless/ralink/rt2x00/rt2800lib.c | 384 ++++++++++++++++++ - 1 file changed, 384 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8696,6 +8696,389 @@ static void rt2800_rxdcoc_calibration(st - rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, saverfb0r2); - } - -+static u32 rt2800_do_sqrt_accumulation(u32 si) -+{ -+ u32 root, root_pre, bit; -+ char i; -+ -+ bit = 1 << 15; -+ root = 0; -+ for (i = 15; i >= 0; i = i - 1) { -+ root_pre = root + bit; -+ if ((root_pre * root_pre) <= si) -+ root = root_pre; -+ bit = bit >> 1; -+ } -+ -+ return root; -+} -+ -+static void rt2800_rxiq_calibration(struct rt2x00_dev *rt2x00dev) -+{ -+ u8 rfb0r1, rfb0r2, rfb0r42; -+ u8 rfb4r0, rfb4r19; -+ u8 rfb5r3, rfb5r4, rfb5r17, rfb5r18, rfb5r19, rfb5r20; -+ u8 rfb6r0, rfb6r19; -+ u8 rfb7r3, rfb7r4, rfb7r17, rfb7r18, rfb7r19, rfb7r20; -+ -+ u8 bbp1, bbp4; -+ u8 bbpr241, bbpr242; -+ u32 i; -+ u8 ch_idx; -+ u8 bbpval; -+ u8 rfval, vga_idx = 0; -+ int mi = 0, mq = 0, si = 0, sq = 0, riq = 0; -+ int sigma_i, sigma_q, r_iq, g_rx; -+ int g_imb; -+ int ph_rx; -+ u32 savemacsysctrl = 0; -+ u32 orig_RF_CONTROL0 = 0; -+ u32 orig_RF_BYPASS0 = 0; -+ u32 orig_RF_CONTROL1 = 0; -+ u32 orig_RF_BYPASS1 = 0; -+ u32 orig_RF_CONTROL3 = 0; -+ u32 orig_RF_BYPASS3 = 0; -+ u32 macstatus, bbpval1 = 0; -+ u8 rf_vga_table[] = {0x20, 0x21, 0x22, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f}; -+ -+ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ orig_RF_CONTROL0 = rt2800_register_read(rt2x00dev, RF_CONTROL0); -+ orig_RF_BYPASS0 = rt2800_register_read(rt2x00dev, RF_BYPASS0); -+ orig_RF_CONTROL1 = rt2800_register_read(rt2x00dev, RF_CONTROL1); -+ orig_RF_BYPASS1 = rt2800_register_read(rt2x00dev, RF_BYPASS1); -+ orig_RF_CONTROL3 = rt2800_register_read(rt2x00dev, RF_CONTROL3); -+ orig_RF_BYPASS3 = rt2800_register_read(rt2x00dev, RF_BYPASS3); -+ -+ bbp1 = rt2800_bbp_read(rt2x00dev, 1); -+ bbp4 = rt2800_bbp_read(rt2x00dev, 4); -+ -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x0); -+ -+ for (i = 0; i < 10000; i++) { -+ macstatus = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); -+ if (macstatus & 0x3) -+ usleep_range(50, 100); -+ else -+ break; -+ } -+ -+ if (i == 10000) -+ rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n"); -+ -+ bbpval = bbp4 & (~0x18); -+ bbpval = bbp4 | 0x00; -+ rt2800_bbp_write(rt2x00dev, 4, bbpval); -+ -+ bbpval = rt2800_bbp_read(rt2x00dev, 21); -+ bbpval = bbpval | 1; -+ rt2800_bbp_write(rt2x00dev, 21, bbpval); -+ bbpval = bbpval & 0xfe; -+ rt2800_bbp_write(rt2x00dev, 21, bbpval); -+ -+ rt2800_register_write(rt2x00dev, RF_CONTROL1, 0x00000202); -+ rt2800_register_write(rt2x00dev, RF_BYPASS1, 0x00000303); -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) -+ rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x0101); -+ else -+ rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x0000); -+ -+ rt2800_register_write(rt2x00dev, RF_BYPASS3, 0xf1f1); -+ -+ rfb0r1 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); -+ rfb0r2 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); -+ rfb0r42 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); -+ rfb4r0 = rt2800_rfcsr_read_bank(rt2x00dev, 4, 0); -+ rfb4r19 = rt2800_rfcsr_read_bank(rt2x00dev, 4, 19); -+ rfb5r3 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3); -+ rfb5r4 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); -+ rfb5r17 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); -+ rfb5r18 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18); -+ rfb5r19 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19); -+ rfb5r20 = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20); -+ -+ rfb6r0 = rt2800_rfcsr_read_bank(rt2x00dev, 6, 0); -+ rfb6r19 = rt2800_rfcsr_read_bank(rt2x00dev, 6, 19); -+ rfb7r3 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 3); -+ rfb7r4 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4); -+ rfb7r17 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 17); -+ rfb7r18 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 18); -+ rfb7r19 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 19); -+ rfb7r20 = rt2800_rfcsr_read_bank(rt2x00dev, 7, 20); -+ -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x87); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0x27); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x38); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x38); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x80); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 18, 0xC1); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 19, 0x60); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 20, 0x00); -+ -+ rt2800_bbp_write(rt2x00dev, 23, 0x0); -+ rt2800_bbp_write(rt2x00dev, 24, 0x0); -+ -+ rt2800_bbp_dcoc_write(rt2x00dev, 5, 0x0); -+ -+ bbpr241 = rt2800_bbp_read(rt2x00dev, 241); -+ bbpr242 = rt2800_bbp_read(rt2x00dev, 242); -+ -+ rt2800_bbp_write(rt2x00dev, 241, 0x10); -+ rt2800_bbp_write(rt2x00dev, 242, 0x84); -+ rt2800_bbp_write(rt2x00dev, 244, 0x31); -+ -+ bbpval = rt2800_bbp_dcoc_read(rt2x00dev, 3); -+ bbpval = bbpval & (~0x7); -+ rt2800_bbp_dcoc_write(rt2x00dev, 3, bbpval); -+ -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); -+ udelay(1); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000006); -+ usleep_range(1, 200); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003376); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006); -+ udelay(1); -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { -+ rt2800_bbp_write(rt2x00dev, 23, 0x06); -+ rt2800_bbp_write(rt2x00dev, 24, 0x06); -+ } else { -+ rt2800_bbp_write(rt2x00dev, 23, 0x02); -+ rt2800_bbp_write(rt2x00dev, 24, 0x02); -+ } -+ -+ for (ch_idx = 0; ch_idx < 2; ch_idx = ch_idx + 1) { -+ if (ch_idx == 0) { -+ rfval = rfb0r1 & (~0x3); -+ rfval = rfb0r1 | 0x1; -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfval); -+ rfval = rfb0r2 & (~0x33); -+ rfval = rfb0r2 | 0x11; -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfval); -+ rfval = rfb0r42 & (~0x50); -+ rfval = rfb0r42 | 0x10; -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfval); -+ -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006); -+ udelay(1); -+ -+ bbpval = bbp1 & (~0x18); -+ bbpval = bbpval | 0x00; -+ rt2800_bbp_write(rt2x00dev, 1, bbpval); -+ -+ rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x00); -+ } else { -+ rfval = rfb0r1 & (~0x3); -+ rfval = rfb0r1 | 0x2; -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfval); -+ rfval = rfb0r2 & (~0x33); -+ rfval = rfb0r2 | 0x22; -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfval); -+ rfval = rfb0r42 & (~0x50); -+ rfval = rfb0r42 | 0x40; -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfval); -+ -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002006); -+ udelay(1); -+ -+ bbpval = bbp1 & (~0x18); -+ bbpval = bbpval | 0x08; -+ rt2800_bbp_write(rt2x00dev, 1, bbpval); -+ -+ rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x01); -+ } -+ usleep_range(500, 1500); -+ -+ vga_idx = 0; -+ while (vga_idx < 11) { -+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rf_vga_table[vga_idx]); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rf_vga_table[vga_idx]); -+ -+ rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x93); -+ -+ for (i = 0; i < 10000; i++) { -+ bbpval = rt2800_bbp_read(rt2x00dev, 159); -+ if ((bbpval & 0xff) == 0x93) -+ usleep_range(50, 100); -+ else -+ break; -+ } -+ -+ if ((bbpval & 0xff) == 0x93) { -+ rt2x00_warn(rt2x00dev, "Fatal Error: Calibration doesn't finish"); -+ goto restore_value; -+ } -+ -+ for (i = 0; i < 5; i++) { -+ u32 bbptemp = 0; -+ u8 value = 0; -+ int result = 0; -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x1e); -+ rt2800_bbp_write(rt2x00dev, 159, i); -+ rt2800_bbp_write(rt2x00dev, 158, 0x22); -+ value = rt2800_bbp_read(rt2x00dev, 159); -+ bbptemp = bbptemp + (value << 24); -+ rt2800_bbp_write(rt2x00dev, 158, 0x21); -+ value = rt2800_bbp_read(rt2x00dev, 159); -+ bbptemp = bbptemp + (value << 16); -+ rt2800_bbp_write(rt2x00dev, 158, 0x20); -+ value = rt2800_bbp_read(rt2x00dev, 159); -+ bbptemp = bbptemp + (value << 8); -+ rt2800_bbp_write(rt2x00dev, 158, 0x1f); -+ value = rt2800_bbp_read(rt2x00dev, 159); -+ bbptemp = bbptemp + value; -+ -+ if (i < 2 && (bbptemp & 0x800000)) -+ result = (bbptemp & 0xffffff) - 0x1000000; -+ else if (i == 4) -+ result = bbptemp; -+ else -+ result = bbptemp; -+ -+ if (i == 0) -+ mi = result / 4096; -+ else if (i == 1) -+ mq = result / 4096; -+ else if (i == 2) -+ si = bbptemp / 4096; -+ else if (i == 3) -+ sq = bbptemp / 4096; -+ else -+ riq = result / 4096; -+ } -+ -+ bbpval1 = si - mi * mi; -+ rt2x00_dbg(rt2x00dev, -+ "RXIQ si=%d, sq=%d, riq=%d, bbpval %d, vga_idx %d", -+ si, sq, riq, bbpval1, vga_idx); -+ -+ if (bbpval1 >= (100 * 100)) -+ break; -+ -+ if (bbpval1 <= 100) -+ vga_idx = vga_idx + 9; -+ else if (bbpval1 <= 158) -+ vga_idx = vga_idx + 8; -+ else if (bbpval1 <= 251) -+ vga_idx = vga_idx + 7; -+ else if (bbpval1 <= 398) -+ vga_idx = vga_idx + 6; -+ else if (bbpval1 <= 630) -+ vga_idx = vga_idx + 5; -+ else if (bbpval1 <= 1000) -+ vga_idx = vga_idx + 4; -+ else if (bbpval1 <= 1584) -+ vga_idx = vga_idx + 3; -+ else if (bbpval1 <= 2511) -+ vga_idx = vga_idx + 2; -+ else -+ vga_idx = vga_idx + 1; -+ } -+ -+ sigma_i = rt2800_do_sqrt_accumulation(100 * (si - mi * mi)); -+ sigma_q = rt2800_do_sqrt_accumulation(100 * (sq - mq * mq)); -+ r_iq = 10 * (riq - (mi * mq)); -+ -+ rt2x00_dbg(rt2x00dev, "Sigma_i=%d, Sigma_q=%d, R_iq=%d", sigma_i, sigma_q, r_iq); -+ -+ if (sigma_i <= 1400 && sigma_i >= 1000 && -+ (sigma_i - sigma_q) <= 112 && -+ (sigma_i - sigma_q) >= -112 && -+ mi <= 32 && mi >= -32 && -+ mq <= 32 && mq >= -32) { -+ r_iq = 10 * (riq - (mi * mq)); -+ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n", -+ sigma_i, sigma_q, r_iq); -+ -+ g_rx = (1000 * sigma_q) / sigma_i; -+ g_imb = ((-2) * 128 * (1000 - g_rx)) / (1000 + g_rx); -+ ph_rx = (r_iq * 2292) / (sigma_i * sigma_q); -+ -+ if (ph_rx > 20 || ph_rx < -20) { -+ ph_rx = 0; -+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL"); -+ } -+ -+ if (g_imb > 12 || g_imb < -12) { -+ g_imb = 0; -+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL"); -+ } -+ } else { -+ g_imb = 0; -+ ph_rx = 0; -+ rt2x00_dbg(rt2x00dev, "RXIQ Sigma_i=%d, Sigma_q=%d, R_iq=%d\n", -+ sigma_i, sigma_q, r_iq); -+ rt2x00_warn(rt2x00dev, "RXIQ calibration FAIL"); -+ } -+ -+ if (ch_idx == 0) { -+ rt2800_bbp_write(rt2x00dev, 158, 0x37); -+ rt2800_bbp_write(rt2x00dev, 159, g_imb & 0x3f); -+ rt2800_bbp_write(rt2x00dev, 158, 0x35); -+ rt2800_bbp_write(rt2x00dev, 159, ph_rx & 0x3f); -+ } else { -+ rt2800_bbp_write(rt2x00dev, 158, 0x55); -+ rt2800_bbp_write(rt2x00dev, 159, g_imb & 0x3f); -+ rt2800_bbp_write(rt2x00dev, 158, 0x53); -+ rt2800_bbp_write(rt2x00dev, 159, ph_rx & 0x3f); -+ } -+ } -+ -+restore_value: -+ rt2800_bbp_write(rt2x00dev, 158, 0x3); -+ bbpval = rt2800_bbp_read(rt2x00dev, 159); -+ rt2800_bbp_write(rt2x00dev, 159, (bbpval | 0x07)); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x00); -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ rt2800_bbp_write(rt2x00dev, 1, bbp1); -+ rt2800_bbp_write(rt2x00dev, 4, bbp4); -+ rt2800_bbp_write(rt2x00dev, 241, bbpr241); -+ rt2800_bbp_write(rt2x00dev, 242, bbpr242); -+ -+ rt2800_bbp_write(rt2x00dev, 244, 0x00); -+ bbpval = rt2800_bbp_read(rt2x00dev, 21); -+ bbpval |= 0x1; -+ rt2800_bbp_write(rt2x00dev, 21, bbpval); -+ usleep_range(10, 200); -+ bbpval &= 0xfe; -+ rt2800_bbp_write(rt2x00dev, 21, bbpval); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfb0r1); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfb0r2); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfb0r42); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 0, rfb4r0); -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 19, rfb4r19); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rfb5r3); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rfb5r4); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, rfb5r17); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, rfb5r18); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, rfb5r19); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, rfb5r20); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 0, rfb6r0); -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 19, rfb6r19); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 3, rfb7r3); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, rfb7r4); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 17, rfb7r17); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 18, rfb7r18); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 19, rfb7r19); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 20, rfb7r20); -+ -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000006); -+ udelay(1); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); -+ udelay(1); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, orig_RF_CONTROL0); -+ udelay(1); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, orig_RF_BYPASS0); -+ rt2800_register_write(rt2x00dev, RF_CONTROL1, orig_RF_CONTROL1); -+ rt2800_register_write(rt2x00dev, RF_BYPASS1, orig_RF_BYPASS1); -+ rt2800_register_write(rt2x00dev, RF_CONTROL3, orig_RF_CONTROL3); -+ rt2800_register_write(rt2x00dev, RF_BYPASS3, orig_RF_BYPASS3); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); -+} -+ - static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, - bool set_bw, bool is_ht40) - { -@@ -9308,6 +9691,7 @@ static void rt2800_init_rfcsr_6352(struc - rt2800_rxdcoc_calibration(rt2x00dev); - rt2800_bw_filter_calibration(rt2x00dev, true); - rt2800_bw_filter_calibration(rt2x00dev, false); -+ rt2800_rxiq_calibration(rt2x00dev); - } - - static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) diff --git a/package/kernel/mac80211/patches/rt2x00/986-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/986-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch deleted file mode 100644 index 0fdbaae6a4..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/986-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 5f921753b95927c964a5061b5b64c310b968ff3e Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 16 Sep 2022 20:43:14 +0100 -Subject: [PATCH 08/16] rt2x00: don't run Rt5592 IQ calibration on MT7620 -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -The function rt2800_iq_calibrate is intended for Rt5592 only. -Don't call it for MT7620 which has it's own calibration functions. - -Reported-by: Serge Vasilugin -Signed-off-by: Daniel Golle ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -4366,7 +4366,8 @@ static void rt2800_config_channel(struct - reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain; - rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); - -- rt2800_iq_calibrate(rt2x00dev, rf->channel); -+ if (!rt2x00_rt(rt2x00dev, RT6352)) -+ rt2800_iq_calibrate(rt2x00dev, rf->channel); - } - - if (rt2x00_rt(rt2x00dev, RT6352)) { diff --git a/package/kernel/mac80211/patches/rt2x00/987-rt2x00-add-TX-LOFT-calibration.patch b/package/kernel/mac80211/patches/rt2x00/987-rt2x00-add-TX-LOFT-calibration.patch deleted file mode 100644 index 4ce532be84..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/987-rt2x00-add-TX-LOFT-calibration.patch +++ /dev/null @@ -1,984 +0,0 @@ -From e02adea15f762d2add77b2b7714706f5c3c2f9c9 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Thu, 11 Jan 2018 19:53:49 +0100 -Subject: [PATCH 09/16] rt2x00: add TX LOFT calibration for MT7620 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -From: Tomislav Požega - -Add TX LOFT calibration from mtk driver. - -Signed-off-by: Tomislav Požega ---- - .../net/wireless/ralink/rt2x00/rt2800lib.c | 922 ++++++++++++++++++ - .../net/wireless/ralink/rt2x00/rt2800lib.h | 10 + - 2 files changed, 932 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9080,6 +9080,927 @@ restore_value: - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); - } - -+static void rt2800_rf_configstore(struct rt2x00_dev *rt2x00dev, -+ struct rf_reg_pair rf_reg_record[][13], u8 chain) -+{ -+ u8 rfvalue = 0; -+ -+ if (chain == CHAIN_0) { -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); -+ rf_reg_record[CHAIN_0][0].bank = 0; -+ rf_reg_record[CHAIN_0][0].reg = 1; -+ rf_reg_record[CHAIN_0][0].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); -+ rf_reg_record[CHAIN_0][1].bank = 0; -+ rf_reg_record[CHAIN_0][1].reg = 2; -+ rf_reg_record[CHAIN_0][1].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35); -+ rf_reg_record[CHAIN_0][2].bank = 0; -+ rf_reg_record[CHAIN_0][2].reg = 35; -+ rf_reg_record[CHAIN_0][2].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); -+ rf_reg_record[CHAIN_0][3].bank = 0; -+ rf_reg_record[CHAIN_0][3].reg = 42; -+ rf_reg_record[CHAIN_0][3].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 0); -+ rf_reg_record[CHAIN_0][4].bank = 4; -+ rf_reg_record[CHAIN_0][4].reg = 0; -+ rf_reg_record[CHAIN_0][4].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 2); -+ rf_reg_record[CHAIN_0][5].bank = 4; -+ rf_reg_record[CHAIN_0][5].reg = 2; -+ rf_reg_record[CHAIN_0][5].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 4, 34); -+ rf_reg_record[CHAIN_0][6].bank = 4; -+ rf_reg_record[CHAIN_0][6].reg = 34; -+ rf_reg_record[CHAIN_0][6].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 3); -+ rf_reg_record[CHAIN_0][7].bank = 5; -+ rf_reg_record[CHAIN_0][7].reg = 3; -+ rf_reg_record[CHAIN_0][7].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 4); -+ rf_reg_record[CHAIN_0][8].bank = 5; -+ rf_reg_record[CHAIN_0][8].reg = 4; -+ rf_reg_record[CHAIN_0][8].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 17); -+ rf_reg_record[CHAIN_0][9].bank = 5; -+ rf_reg_record[CHAIN_0][9].reg = 17; -+ rf_reg_record[CHAIN_0][9].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 18); -+ rf_reg_record[CHAIN_0][10].bank = 5; -+ rf_reg_record[CHAIN_0][10].reg = 18; -+ rf_reg_record[CHAIN_0][10].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 19); -+ rf_reg_record[CHAIN_0][11].bank = 5; -+ rf_reg_record[CHAIN_0][11].reg = 19; -+ rf_reg_record[CHAIN_0][11].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 20); -+ rf_reg_record[CHAIN_0][12].bank = 5; -+ rf_reg_record[CHAIN_0][12].reg = 20; -+ rf_reg_record[CHAIN_0][12].value = rfvalue; -+ } else if (chain == CHAIN_1) { -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 1); -+ rf_reg_record[CHAIN_1][0].bank = 0; -+ rf_reg_record[CHAIN_1][0].reg = 1; -+ rf_reg_record[CHAIN_1][0].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 2); -+ rf_reg_record[CHAIN_1][1].bank = 0; -+ rf_reg_record[CHAIN_1][1].reg = 2; -+ rf_reg_record[CHAIN_1][1].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 35); -+ rf_reg_record[CHAIN_1][2].bank = 0; -+ rf_reg_record[CHAIN_1][2].reg = 35; -+ rf_reg_record[CHAIN_1][2].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); -+ rf_reg_record[CHAIN_1][3].bank = 0; -+ rf_reg_record[CHAIN_1][3].reg = 42; -+ rf_reg_record[CHAIN_1][3].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 0); -+ rf_reg_record[CHAIN_1][4].bank = 6; -+ rf_reg_record[CHAIN_1][4].reg = 0; -+ rf_reg_record[CHAIN_1][4].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 2); -+ rf_reg_record[CHAIN_1][5].bank = 6; -+ rf_reg_record[CHAIN_1][5].reg = 2; -+ rf_reg_record[CHAIN_1][5].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 6, 34); -+ rf_reg_record[CHAIN_1][6].bank = 6; -+ rf_reg_record[CHAIN_1][6].reg = 34; -+ rf_reg_record[CHAIN_1][6].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 3); -+ rf_reg_record[CHAIN_1][7].bank = 7; -+ rf_reg_record[CHAIN_1][7].reg = 3; -+ rf_reg_record[CHAIN_1][7].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 4); -+ rf_reg_record[CHAIN_1][8].bank = 7; -+ rf_reg_record[CHAIN_1][8].reg = 4; -+ rf_reg_record[CHAIN_1][8].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 17); -+ rf_reg_record[CHAIN_1][9].bank = 7; -+ rf_reg_record[CHAIN_1][9].reg = 17; -+ rf_reg_record[CHAIN_1][9].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 18); -+ rf_reg_record[CHAIN_1][10].bank = 7; -+ rf_reg_record[CHAIN_1][10].reg = 18; -+ rf_reg_record[CHAIN_1][10].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 19); -+ rf_reg_record[CHAIN_1][11].bank = 7; -+ rf_reg_record[CHAIN_1][11].reg = 19; -+ rf_reg_record[CHAIN_1][11].value = rfvalue; -+ rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 20); -+ rf_reg_record[CHAIN_1][12].bank = 7; -+ rf_reg_record[CHAIN_1][12].reg = 20; -+ rf_reg_record[CHAIN_1][12].value = rfvalue; -+ } else { -+ rt2x00_warn(rt2x00dev, "Unknown chain = %u\n", chain); -+ } -+} -+ -+static void rt2800_rf_configrecover(struct rt2x00_dev *rt2x00dev, -+ struct rf_reg_pair rf_record[][13]) -+{ -+ u8 chain_index = 0, record_index = 0; -+ u8 bank = 0, rf_register = 0, value = 0; -+ -+ for (chain_index = 0; chain_index < 2; chain_index++) { -+ for (record_index = 0; record_index < 13; record_index++) { -+ bank = rf_record[chain_index][record_index].bank; -+ rf_register = rf_record[chain_index][record_index].reg; -+ value = rf_record[chain_index][record_index].value; -+ rt2800_rfcsr_write_bank(rt2x00dev, bank, rf_register, value); -+ rt2x00_dbg(rt2x00dev, "bank: %d, rf_register: %d, value: %x\n", -+ bank, rf_register, value); -+ } -+ } -+} -+ -+static void rt2800_setbbptonegenerator(struct rt2x00_dev *rt2x00dev) -+{ -+ rt2800_bbp_write(rt2x00dev, 158, 0xAA); -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xAB); -+ rt2800_bbp_write(rt2x00dev, 159, 0x0A); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xAC); -+ rt2800_bbp_write(rt2x00dev, 159, 0x3F); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xAD); -+ rt2800_bbp_write(rt2x00dev, 159, 0x3F); -+ -+ rt2800_bbp_write(rt2x00dev, 244, 0x40); -+} -+ -+static u32 rt2800_do_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx, u8 read_neg) -+{ -+ u32 macvalue = 0; -+ int fftout_i = 0, fftout_q = 0; -+ u32 ptmp = 0, pint = 0; -+ u8 bbp = 0; -+ u8 tidxi; -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x00); -+ rt2800_bbp_write(rt2x00dev, 159, 0x9b); -+ -+ bbp = 0x9b; -+ -+ while (bbp == 0x9b) { -+ usleep_range(10, 50); -+ bbp = rt2800_bbp_read(rt2x00dev, 159); -+ bbp = bbp & 0xff; -+ } -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xba); -+ rt2800_bbp_write(rt2x00dev, 159, tidx); -+ rt2800_bbp_write(rt2x00dev, 159, tidx); -+ rt2800_bbp_write(rt2x00dev, 159, tidx); -+ -+ macvalue = rt2800_register_read(rt2x00dev, 0x057C); -+ -+ fftout_i = (macvalue >> 16); -+ fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i; -+ fftout_q = (macvalue & 0xffff); -+ fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q; -+ ptmp = (fftout_i * fftout_i); -+ ptmp = ptmp + (fftout_q * fftout_q); -+ pint = ptmp; -+ rt2x00_dbg(rt2x00dev, "I = %d, Q = %d, power = %x\n", fftout_i, fftout_q, pint); -+ if (read_neg) { -+ pint = pint >> 1; -+ tidxi = 0x40 - tidx; -+ tidxi = tidxi & 0x3f; -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xba); -+ rt2800_bbp_write(rt2x00dev, 159, tidxi); -+ rt2800_bbp_write(rt2x00dev, 159, tidxi); -+ rt2800_bbp_write(rt2x00dev, 159, tidxi); -+ -+ macvalue = rt2800_register_read(rt2x00dev, 0x057C); -+ -+ fftout_i = (macvalue >> 16); -+ fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i; -+ fftout_q = (macvalue & 0xffff); -+ fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q; -+ ptmp = (fftout_i * fftout_i); -+ ptmp = ptmp + (fftout_q * fftout_q); -+ ptmp = ptmp >> 1; -+ pint = pint + ptmp; -+ } -+ -+ return pint; -+} -+ -+static u32 rt2800_read_fft_accumulation(struct rt2x00_dev *rt2x00dev, u8 tidx) -+{ -+ u32 macvalue = 0; -+ int fftout_i = 0, fftout_q = 0; -+ u32 ptmp = 0, pint = 0; -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xBA); -+ rt2800_bbp_write(rt2x00dev, 159, tidx); -+ rt2800_bbp_write(rt2x00dev, 159, tidx); -+ rt2800_bbp_write(rt2x00dev, 159, tidx); -+ -+ macvalue = rt2800_register_read(rt2x00dev, 0x057C); -+ -+ fftout_i = (macvalue >> 16); -+ fftout_i = (fftout_i & 0x8000) ? (fftout_i - 0x10000) : fftout_i; -+ fftout_q = (macvalue & 0xffff); -+ fftout_q = (fftout_q & 0x8000) ? (fftout_q - 0x10000) : fftout_q; -+ ptmp = (fftout_i * fftout_i); -+ ptmp = ptmp + (fftout_q * fftout_q); -+ pint = ptmp; -+ -+ return pint; -+} -+ -+static void rt2800_write_dc(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 alc, u8 iorq, u8 dc) -+{ -+ u8 bbp = 0; -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xb0); -+ bbp = alc | 0x80; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+ -+ if (ch_idx == 0) -+ bbp = (iorq == 0) ? 0xb1 : 0xb2; -+ else -+ bbp = (iorq == 0) ? 0xb8 : 0xb9; -+ -+ rt2800_bbp_write(rt2x00dev, 158, bbp); -+ bbp = dc; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+} -+ -+static void rt2800_loft_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, -+ u8 alc_idx, u8 dc_result[][RF_ALC_NUM][2]) -+{ -+ u32 p0 = 0, p1 = 0, pf = 0; -+ char idx0 = 0, idx1 = 0; -+ u8 idxf[] = {0x00, 0x00}; -+ u8 ibit = 0x20; -+ u8 iorq; -+ char bidx; -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xb0); -+ rt2800_bbp_write(rt2x00dev, 159, 0x80); -+ -+ for (bidx = 5; bidx >= 0; bidx--) { -+ for (iorq = 0; iorq <= 1; iorq++) { -+ rt2x00_dbg(rt2x00dev, "\n========================================================\n"); -+ -+ if (idxf[iorq] == 0x20) { -+ idx0 = 0x20; -+ p0 = pf; -+ } else { -+ idx0 = idxf[iorq] - ibit; -+ idx0 = idx0 & 0x3F; -+ rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idx0); -+ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); -+ } -+ -+ idx1 = idxf[iorq] + (bidx == 5 ? 0 : ibit); -+ idx1 = idx1 & 0x3F; -+ rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idx1); -+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); -+ -+ rt2x00_dbg(rt2x00dev, "alc=%u, IorQ=%u, idx_final=%2x\n", -+ alc_idx, iorq, idxf[iorq]); -+ rt2x00_dbg(rt2x00dev, "p0=%x, p1=%x, pf=%x, idx_0=%x, idx_1=%x, ibit=%x\n", -+ p0, p1, pf, idx0, idx1, ibit); -+ -+ if (bidx != 5 && pf <= p0 && pf < p1) { -+ idxf[iorq] = idxf[iorq]; -+ } else if (p0 < p1) { -+ pf = p0; -+ idxf[iorq] = idx0 & 0x3F; -+ } else { -+ pf = p1; -+ idxf[iorq] = idx1 & 0x3F; -+ } -+ rt2x00_dbg(rt2x00dev, "IorQ=%u, idx_final[%u]:%x, pf:%8x\n", -+ iorq, iorq, idxf[iorq], pf); -+ -+ rt2800_write_dc(rt2x00dev, ch_idx, 0, iorq, idxf[iorq]); -+ } -+ ibit = ibit >> 1; -+ } -+ dc_result[ch_idx][alc_idx][0] = idxf[0]; -+ dc_result[ch_idx][alc_idx][1] = idxf[1]; -+} -+ -+static void rt2800_iq_search(struct rt2x00_dev *rt2x00dev, u8 ch_idx, u8 *ges, u8 *pes) -+{ -+ u32 p0 = 0, p1 = 0, pf = 0; -+ char perr = 0, gerr = 0, iq_err = 0; -+ char pef = 0, gef = 0; -+ char psta, pend; -+ char gsta, gend; -+ -+ u8 ibit = 0x20; -+ u8 first_search = 0x00, touch_neg_max = 0x00; -+ char idx0 = 0, idx1 = 0; -+ u8 gop; -+ u8 bbp = 0; -+ char bidx; -+ -+ for (bidx = 5; bidx >= 1; bidx--) { -+ for (gop = 0; gop < 2; gop++) { -+ rt2x00_dbg(rt2x00dev, "\n==============================================\n"); -+ -+ if (gop == 1 || bidx < 4) { -+ if (gop == 0) -+ iq_err = gerr; -+ else -+ iq_err = perr; -+ -+ first_search = (gop == 0) ? (bidx == 3) : (bidx == 5); -+ touch_neg_max = (gop) ? ((iq_err & 0x0F) == 0x08) : -+ ((iq_err & 0x3F) == 0x20); -+ -+ if (touch_neg_max) { -+ p0 = pf; -+ idx0 = iq_err; -+ } else { -+ idx0 = iq_err - ibit; -+ bbp = (ch_idx == 0) ? ((gop == 0) ? 0x28 : 0x29) : -+ ((gop == 0) ? 0x46 : 0x47); -+ -+ rt2800_bbp_write(rt2x00dev, 158, bbp); -+ rt2800_bbp_write(rt2x00dev, 159, idx0); -+ -+ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1); -+ } -+ -+ idx1 = iq_err + (first_search ? 0 : ibit); -+ idx1 = (gop == 0) ? (idx1 & 0x0F) : (idx1 & 0x3F); -+ -+ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 : -+ (gop == 0) ? 0x46 : 0x47; -+ -+ rt2800_bbp_write(rt2x00dev, 158, bbp); -+ rt2800_bbp_write(rt2x00dev, 159, idx1); -+ -+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1); -+ -+ rt2x00_dbg(rt2x00dev, -+ "p0=%x, p1=%x, pwer_final=%x, idx0=%x, idx1=%x, iq_err=%x, gop=%d, ibit=%x\n", -+ p0, p1, pf, idx0, idx1, iq_err, gop, ibit); -+ -+ if (!(!first_search && pf <= p0 && pf < p1)) { -+ if (p0 < p1) { -+ pf = p0; -+ iq_err = idx0; -+ } else { -+ pf = p1; -+ iq_err = idx1; -+ } -+ } -+ -+ bbp = (ch_idx == 0) ? (gop == 0) ? 0x28 : 0x29 : -+ (gop == 0) ? 0x46 : 0x47; -+ -+ rt2800_bbp_write(rt2x00dev, 158, bbp); -+ rt2800_bbp_write(rt2x00dev, 159, iq_err); -+ -+ if (gop == 0) -+ gerr = iq_err; -+ else -+ perr = iq_err; -+ -+ rt2x00_dbg(rt2x00dev, "IQCalibration pf=%8x (%2x, %2x) !\n", -+ pf, gerr & 0x0F, perr & 0x3F); -+ } -+ } -+ -+ if (bidx > 0) -+ ibit = (ibit >> 1); -+ } -+ gerr = (gerr & 0x08) ? (gerr & 0x0F) - 0x10 : (gerr & 0x0F); -+ perr = (perr & 0x20) ? (perr & 0x3F) - 0x40 : (perr & 0x3F); -+ -+ gerr = (gerr < -0x07) ? -0x07 : (gerr > 0x05) ? 0x05 : gerr; -+ gsta = gerr - 1; -+ gend = gerr + 2; -+ -+ perr = (perr < -0x1f) ? -0x1f : (perr > 0x1d) ? 0x1d : perr; -+ psta = perr - 1; -+ pend = perr + 2; -+ -+ for (gef = gsta; gef <= gend; gef = gef + 1) -+ for (pef = psta; pef <= pend; pef = pef + 1) { -+ bbp = (ch_idx == 0) ? 0x28 : 0x46; -+ rt2800_bbp_write(rt2x00dev, 158, bbp); -+ rt2800_bbp_write(rt2x00dev, 159, gef & 0x0F); -+ -+ bbp = (ch_idx == 0) ? 0x29 : 0x47; -+ rt2800_bbp_write(rt2x00dev, 158, bbp); -+ rt2800_bbp_write(rt2x00dev, 159, pef & 0x3F); -+ -+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 1); -+ if (gef == gsta && pef == psta) { -+ pf = p1; -+ gerr = gef; -+ perr = pef; -+ } else if (pf > p1) { -+ pf = p1; -+ gerr = gef; -+ perr = pef; -+ } -+ rt2x00_dbg(rt2x00dev, "Fine IQCalibration p1=%8x pf=%8x (%2x, %2x) !\n", -+ p1, pf, gef & 0x0F, pef & 0x3F); -+ } -+ -+ ges[ch_idx] = gerr & 0x0F; -+ pes[ch_idx] = perr & 0x3F; -+} -+ -+static void rt2800_rf_aux_tx0_loopback(struct rt2x00_dev *rt2x00dev) -+{ -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x21); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, 0x10); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x1b); -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 0, 0x81); -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 2, 0x81); -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 34, 0xee); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, 0x2d); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, 0x2d); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, 0x80); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xd7); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0xa2); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x20); -+} -+ -+static void rt2800_rf_aux_tx1_loopback(struct rt2x00_dev *rt2x00dev) -+{ -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, 0x22); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, 0x20); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 35, 0x00); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x4b); -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 0, 0x81); -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 2, 0x81); -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 34, 0xee); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 3, 0x2d); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 4, 0x2d); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 17, 0x80); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 18, 0xd7); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 19, 0xa2); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 20, 0x20); -+} -+ -+void rt2800_loft_iq_calibration(struct rt2x00_dev *rt2x00dev) -+{ -+ struct rf_reg_pair rf_store[CHAIN_NUM][13]; -+ u32 macorg1 = 0; -+ u32 macorg2 = 0; -+ u32 macorg3 = 0; -+ u32 macorg4 = 0; -+ u32 macorg5 = 0; -+ u32 orig528 = 0; -+ u32 orig52c = 0; -+ -+ u32 savemacsysctrl = 0, mtxcycle = 0; -+ u32 macvalue = 0; -+ u32 mac13b8 = 0; -+ u32 p0 = 0, p1 = 0; -+ u32 p0_idx10 = 0, p1_idx10 = 0; -+ -+ u8 rfvalue; -+ u8 loft_dc_search_result[CHAIN_NUM][RF_ALC_NUM][2]; -+ u8 ger[CHAIN_NUM], per[CHAIN_NUM]; -+ u8 rf_gain[] = {0x00, 0x01, 0x02, 0x04, 0x08, 0x0c}; -+ u8 rfvga_gain_table[] = {0x24, 0x25, 0x26, 0x27, 0x28, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, -+ 0x31, 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3F}; -+ u8 vga_gain[] = {14, 14}; -+ u8 bbp_2324gain[] = {0x16, 0x14, 0x12, 0x10, 0x0c, 0x08}; -+ u8 bbp = 0, ch_idx = 0, rf_alc_idx = 0, idx = 0; -+ u8 bbpr30, rfb0r39, rfb0r42; -+ u8 bbpr1; -+ u8 bbpr4; -+ u8 bbpr241, bbpr242; -+ u8 count_step; -+ -+ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG); -+ macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0); -+ macorg3 = rt2800_register_read(rt2x00dev, RF_BYPASS0); -+ macorg4 = rt2800_register_read(rt2x00dev, RF_CONTROL3); -+ macorg5 = rt2800_register_read(rt2x00dev, RF_BYPASS3); -+ mac13b8 = rt2800_register_read(rt2x00dev, 0x13b8); -+ orig528 = rt2800_register_read(rt2x00dev, RF_CONTROL2); -+ orig52c = rt2800_register_read(rt2x00dev, RF_BYPASS2); -+ -+ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ macvalue &= (~0x04); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); -+ -+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) { -+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); -+ if (macvalue & 0x01) -+ usleep_range(50, 100); -+ else -+ break; -+ } -+ -+ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ macvalue &= (~0x08); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); -+ -+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) { -+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); -+ if (macvalue & 0x02) -+ usleep_range(50, 100); -+ else -+ break; -+ } -+ -+ for (ch_idx = 0; ch_idx < 2; ch_idx++) -+ rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx); -+ -+ bbpr30 = rt2800_bbp_read(rt2x00dev, 30); -+ rfb0r39 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 39); -+ rfb0r42 = rt2800_rfcsr_read_bank(rt2x00dev, 0, 42); -+ -+ rt2800_bbp_write(rt2x00dev, 30, 0x1F); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 39, 0x80); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, 0x5B); -+ -+ rt2800_bbp_write(rt2x00dev, 23, 0x00); -+ rt2800_bbp_write(rt2x00dev, 24, 0x00); -+ -+ rt2800_setbbptonegenerator(rt2x00dev); -+ -+ for (ch_idx = 0; ch_idx < 2; ch_idx++) { -+ rt2800_bbp_write(rt2x00dev, 23, 0x00); -+ rt2800_bbp_write(rt2x00dev, 24, 0x00); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00); -+ rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x0000000F); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003306); -+ rt2800_register_write(rt2x00dev, 0x13b8, 0x10); -+ udelay(1); -+ -+ if (ch_idx == 0) -+ rt2800_rf_aux_tx0_loopback(rt2x00dev); -+ else -+ rt2800_rf_aux_tx1_loopback(rt2x00dev); -+ -+ udelay(1); -+ -+ if (ch_idx == 0) -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001004); -+ else -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002004); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x05); -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x01); -+ if (ch_idx == 0) -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ else -+ rt2800_bbp_write(rt2x00dev, 159, 0x01); -+ -+ vga_gain[ch_idx] = 18; -+ for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) { -+ rt2800_bbp_write(rt2x00dev, 23, bbp_2324gain[rf_alc_idx]); -+ rt2800_bbp_write(rt2x00dev, 24, bbp_2324gain[rf_alc_idx]); -+ -+ macvalue = rt2800_register_read(rt2x00dev, RF_CONTROL3); -+ macvalue &= (~0x0000F1F1); -+ macvalue |= (rf_gain[rf_alc_idx] << 4); -+ macvalue |= (rf_gain[rf_alc_idx] << 12); -+ rt2800_register_write(rt2x00dev, RF_CONTROL3, macvalue); -+ macvalue = (0x0000F1F1); -+ rt2800_register_write(rt2x00dev, RF_BYPASS3, macvalue); -+ -+ if (rf_alc_idx == 0) { -+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x21); -+ for (; vga_gain[ch_idx] > 0; -+ vga_gain[ch_idx] = vga_gain[ch_idx] - 2) { -+ rfvalue = rfvga_gain_table[vga_gain[ch_idx]]; -+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue); -+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x00); -+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x00); -+ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); -+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x21); -+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x0A, 0); -+ rt2x00_dbg(rt2x00dev, "LOFT AGC %d %d\n", p0, p1); -+ if ((p0 < 7000 * 7000) && (p1 < (7000 * 7000))) -+ break; -+ } -+ -+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 0, 0x00); -+ rt2800_write_dc(rt2x00dev, ch_idx, 0, 1, 0x00); -+ -+ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx], -+ rfvga_gain_table[vga_gain[ch_idx]]); -+ -+ if (vga_gain[ch_idx] < 0) -+ vga_gain[ch_idx] = 0; -+ } -+ -+ rfvalue = rfvga_gain_table[vga_gain[ch_idx]]; -+ -+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue); -+ -+ rt2800_loft_search(rt2x00dev, ch_idx, rf_alc_idx, loft_dc_search_result); -+ } -+ } -+ -+ for (rf_alc_idx = 0; rf_alc_idx < 3; rf_alc_idx++) { -+ for (idx = 0; idx < 4; idx++) { -+ rt2800_bbp_write(rt2x00dev, 158, 0xB0); -+ bbp = (idx << 2) + rf_alc_idx; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+ rt2x00_dbg(rt2x00dev, " ALC %2x,", bbp); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xb1); -+ bbp = loft_dc_search_result[CHAIN_0][rf_alc_idx][0x00]; -+ bbp = bbp & 0x3F; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+ rt2x00_dbg(rt2x00dev, " I0 %2x,", bbp); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xb2); -+ bbp = loft_dc_search_result[CHAIN_0][rf_alc_idx][0x01]; -+ bbp = bbp & 0x3F; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+ rt2x00_dbg(rt2x00dev, " Q0 %2x,", bbp); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xb8); -+ bbp = loft_dc_search_result[CHAIN_1][rf_alc_idx][0x00]; -+ bbp = bbp & 0x3F; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+ rt2x00_dbg(rt2x00dev, " I1 %2x,", bbp); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0xb9); -+ bbp = loft_dc_search_result[CHAIN_1][rf_alc_idx][0x01]; -+ bbp = bbp & 0x3F; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+ rt2x00_dbg(rt2x00dev, " Q1 %2x\n", bbp); -+ } -+ } -+ -+ rt2800_bbp_write(rt2x00dev, 23, 0x00); -+ rt2800_bbp_write(rt2x00dev, 24, 0x00); -+ -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x00); -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ -+ bbp = 0x00; -+ rt2800_bbp_write(rt2x00dev, 244, 0x00); -+ -+ rt2800_bbp_write(rt2x00dev, 21, 0x01); -+ udelay(1); -+ rt2800_bbp_write(rt2x00dev, 21, 0x00); -+ -+ rt2800_rf_configrecover(rt2x00dev, rf_store); -+ -+ rt2800_register_write(rt2x00dev, TX_PIN_CFG, macorg1); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, macorg2); -+ udelay(1); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, macorg3); -+ rt2800_register_write(rt2x00dev, RF_CONTROL3, macorg4); -+ rt2800_register_write(rt2x00dev, RF_BYPASS3, macorg5); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); -+ rt2800_register_write(rt2x00dev, RF_CONTROL2, orig528); -+ rt2800_register_write(rt2x00dev, RF_BYPASS2, orig52c); -+ rt2800_register_write(rt2x00dev, 0x13b8, mac13b8); -+ -+ savemacsysctrl = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ macorg1 = rt2800_register_read(rt2x00dev, TX_PIN_CFG); -+ macorg2 = rt2800_register_read(rt2x00dev, RF_CONTROL0); -+ macorg3 = rt2800_register_read(rt2x00dev, RF_BYPASS0); -+ macorg4 = rt2800_register_read(rt2x00dev, RF_CONTROL3); -+ macorg5 = rt2800_register_read(rt2x00dev, RF_BYPASS3); -+ -+ bbpr1 = rt2800_bbp_read(rt2x00dev, 1); -+ bbpr4 = rt2800_bbp_read(rt2x00dev, 4); -+ bbpr241 = rt2800_bbp_read(rt2x00dev, 241); -+ bbpr242 = rt2800_bbp_read(rt2x00dev, 242); -+ mac13b8 = rt2800_register_read(rt2x00dev, 0x13b8); -+ -+ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ macvalue &= (~0x04); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); -+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) { -+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); -+ if (macvalue & 0x01) -+ usleep_range(50, 100); -+ else -+ break; -+ } -+ -+ macvalue = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); -+ macvalue &= (~0x08); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, macvalue); -+ for (mtxcycle = 0; mtxcycle < 10000; mtxcycle++) { -+ macvalue = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG); -+ if (macvalue & 0x02) -+ usleep_range(50, 100); -+ else -+ break; -+ } -+ -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { -+ rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x00000101); -+ rt2800_register_write(rt2x00dev, RF_BYPASS3, 0x0000F1F1); -+ } -+ -+ rt2800_bbp_write(rt2x00dev, 23, 0x00); -+ rt2800_bbp_write(rt2x00dev, 24, 0x00); -+ -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { -+ rt2800_bbp_write(rt2x00dev, 4, bbpr4 & (~0x18)); -+ rt2800_bbp_write(rt2x00dev, 21, 0x01); -+ udelay(1); -+ rt2800_bbp_write(rt2x00dev, 21, 0x00); -+ -+ rt2800_bbp_write(rt2x00dev, 241, 0x14); -+ rt2800_bbp_write(rt2x00dev, 242, 0x80); -+ rt2800_bbp_write(rt2x00dev, 244, 0x31); -+ } else { -+ rt2800_setbbptonegenerator(rt2x00dev); -+ } -+ -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00000004); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00003306); -+ udelay(1); -+ -+ rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x0000000F); -+ -+ if (!test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { -+ rt2800_register_write(rt2x00dev, RF_CONTROL3, 0x00000000); -+ rt2800_register_write(rt2x00dev, RF_BYPASS3, 0x0000F1F1); -+ } -+ -+ rt2800_register_write(rt2x00dev, 0x13b8, 0x00000010); -+ -+ for (ch_idx = 0; ch_idx < 2; ch_idx++) -+ rt2800_rf_configstore(rt2x00dev, rf_store, ch_idx); -+ -+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x3B); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x3B); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x03); -+ rt2800_bbp_write(rt2x00dev, 159, 0x60); -+ rt2800_bbp_write(rt2x00dev, 158, 0xB0); -+ rt2800_bbp_write(rt2x00dev, 159, 0x80); -+ -+ for (ch_idx = 0; ch_idx < 2; ch_idx++) { -+ rt2800_bbp_write(rt2x00dev, 23, 0x00); -+ rt2800_bbp_write(rt2x00dev, 24, 0x00); -+ -+ if (ch_idx == 0) { -+ rt2800_bbp_write(rt2x00dev, 158, 0x01); -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { -+ bbp = bbpr1 & (~0x18); -+ bbp = bbp | 0x00; -+ rt2800_bbp_write(rt2x00dev, 1, bbp); -+ } -+ rt2800_rf_aux_tx0_loopback(rt2x00dev); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001004); -+ } else { -+ rt2800_bbp_write(rt2x00dev, 158, 0x01); -+ rt2800_bbp_write(rt2x00dev, 159, 0x01); -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags)) { -+ bbp = bbpr1 & (~0x18); -+ bbp = bbp | 0x08; -+ rt2800_bbp_write(rt2x00dev, 1, bbp); -+ } -+ rt2800_rf_aux_tx1_loopback(rt2x00dev); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002004); -+ } -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x05); -+ rt2800_bbp_write(rt2x00dev, 159, 0x04); -+ -+ bbp = (ch_idx == 0) ? 0x28 : 0x46; -+ rt2800_bbp_write(rt2x00dev, 158, bbp); -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { -+ rt2800_bbp_write(rt2x00dev, 23, 0x06); -+ rt2800_bbp_write(rt2x00dev, 24, 0x06); -+ count_step = 1; -+ } else { -+ rt2800_bbp_write(rt2x00dev, 23, 0x1F); -+ rt2800_bbp_write(rt2x00dev, 24, 0x1F); -+ count_step = 2; -+ } -+ -+ for (; vga_gain[ch_idx] < 19; vga_gain[ch_idx] = (vga_gain[ch_idx] + count_step)) { -+ rfvalue = rfvga_gain_table[vga_gain[ch_idx]]; -+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, rfvalue); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, rfvalue); -+ -+ bbp = (ch_idx == 0) ? 0x29 : 0x47; -+ rt2800_bbp_write(rt2x00dev, 158, bbp); -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ p0 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0); -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) -+ p0_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A); -+ -+ bbp = (ch_idx == 0) ? 0x29 : 0x47; -+ rt2800_bbp_write(rt2x00dev, 158, bbp); -+ rt2800_bbp_write(rt2x00dev, 159, 0x21); -+ p1 = rt2800_do_fft_accumulation(rt2x00dev, 0x14, 0); -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX1, &rt2x00dev->cap_flags)) -+ p1_idx10 = rt2800_read_fft_accumulation(rt2x00dev, 0x0A); -+ -+ rt2x00_dbg(rt2x00dev, "IQ AGC %d %d\n", p0, p1); -+ -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { -+ rt2x00_dbg(rt2x00dev, "IQ AGC IDX 10 %d %d\n", p0_idx10, p1_idx10); -+ if ((p0_idx10 > 7000 * 7000) || (p1_idx10 > 7000 * 7000)) { -+ if (vga_gain[ch_idx] != 0) -+ vga_gain[ch_idx] = vga_gain[ch_idx] - 1; -+ break; -+ } -+ } -+ -+ if ((p0 > 2500 * 2500) || (p1 > 2500 * 2500)) -+ break; -+ } -+ -+ if (vga_gain[ch_idx] > 18) -+ vga_gain[ch_idx] = 18; -+ rt2x00_dbg(rt2x00dev, "Used VGA %d %x\n", vga_gain[ch_idx], -+ rfvga_gain_table[vga_gain[ch_idx]]); -+ -+ bbp = (ch_idx == 0) ? 0x29 : 0x47; -+ rt2800_bbp_write(rt2x00dev, 158, bbp); -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ -+ rt2800_iq_search(rt2x00dev, ch_idx, ger, per); -+ } -+ -+ rt2800_bbp_write(rt2x00dev, 23, 0x00); -+ rt2800_bbp_write(rt2x00dev, 24, 0x00); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x28); -+ bbp = ger[CHAIN_0] & 0x0F; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x29); -+ bbp = per[CHAIN_0] & 0x3F; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x46); -+ bbp = ger[CHAIN_1] & 0x0F; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x47); -+ bbp = per[CHAIN_1] & 0x3F; -+ rt2800_bbp_write(rt2x00dev, 159, bbp); -+ -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) { -+ rt2800_bbp_write(rt2x00dev, 1, bbpr1); -+ rt2800_bbp_write(rt2x00dev, 241, bbpr241); -+ rt2800_bbp_write(rt2x00dev, 242, bbpr242); -+ } -+ rt2800_bbp_write(rt2x00dev, 244, 0x00); -+ -+ rt2800_bbp_write(rt2x00dev, 158, 0x00); -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ rt2800_bbp_write(rt2x00dev, 158, 0xB0); -+ rt2800_bbp_write(rt2x00dev, 159, 0x00); -+ -+ rt2800_bbp_write(rt2x00dev, 30, bbpr30); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 39, rfb0r39); -+ rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfb0r42); -+ -+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0, &rt2x00dev->cap_flags)) -+ rt2800_bbp_write(rt2x00dev, 4, bbpr4); -+ -+ rt2800_bbp_write(rt2x00dev, 21, 0x01); -+ udelay(1); -+ rt2800_bbp_write(rt2x00dev, 21, 0x00); -+ -+ rt2800_rf_configrecover(rt2x00dev, rf_store); -+ -+ rt2800_register_write(rt2x00dev, TX_PIN_CFG, macorg1); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x00); -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, macorg2); -+ udelay(1); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, macorg3); -+ rt2800_register_write(rt2x00dev, RF_CONTROL3, macorg4); -+ rt2800_register_write(rt2x00dev, RF_BYPASS3, macorg5); -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl); -+ rt2800_register_write(rt2x00dev, 0x13b8, mac13b8); -+} -+ - static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, - bool set_bw, bool is_ht40) - { -@@ -9692,6 +10613,7 @@ static void rt2800_init_rfcsr_6352(struc - rt2800_rxdcoc_calibration(rt2x00dev); - rt2800_bw_filter_calibration(rt2x00dev, true); - rt2800_bw_filter_calibration(rt2x00dev, false); -+ rt2800_loft_iq_calibration(rt2x00dev); - rt2800_rxiq_calibration(rt2x00dev); - } - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -@@ -17,6 +17,16 @@ - #define WCID_START 33 - #define WCID_END 222 - #define STA_IDS_SIZE (WCID_END - WCID_START + 2) -+#define CHAIN_0 0x0 -+#define CHAIN_1 0x1 -+#define RF_ALC_NUM 6 -+#define CHAIN_NUM 2 -+ -+struct rf_reg_pair { -+ u8 bank; -+ u8 reg; -+ u8 value; -+}; - - /* RT2800 driver data structure */ - struct rt2800_drv_data { diff --git a/package/kernel/mac80211/patches/rt2x00/988-rt2x00-move-helper-functions-up-in-file.patch b/package/kernel/mac80211/patches/rt2x00/988-rt2x00-move-helper-functions-up-in-file.patch deleted file mode 100644 index 7dc37eb826..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/988-rt2x00-move-helper-functions-up-in-file.patch +++ /dev/null @@ -1,78 +0,0 @@ -From f06bc3d756e7bfdaa03f060ae68797321b2e281a Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 16 Sep 2022 20:22:04 +0100 -Subject: [PATCH 10/16] rt2x00: move helper functions up in file -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -Move register access helper functions up to the head of the file so -they can be used in all functions. - -Signed-off-by: Daniel Golle ---- - .../net/wireless/ralink/rt2x00/rt2800lib.c | 40 +++++++++---------- - 1 file changed, 20 insertions(+), 20 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -199,6 +199,26 @@ static void rt2800_rfcsr_write_dccal(str - rt2800_rfcsr_write_bank(rt2x00dev, 7, reg, value); - } - -+static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev, -+ const u8 reg, const u8 value) -+{ -+ rt2800_bbp_write(rt2x00dev, 158, reg); -+ rt2800_bbp_write(rt2x00dev, 159, value); -+} -+ -+static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg) -+{ -+ rt2800_bbp_write(rt2x00dev, 158, reg); -+ return rt2800_bbp_read(rt2x00dev, 159); -+} -+ -+static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev, -+ const u8 reg, const u8 value) -+{ -+ rt2800_bbp_write(rt2x00dev, 195, reg); -+ rt2800_bbp_write(rt2x00dev, 196, value); -+} -+ - static u8 rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word) - { -@@ -6955,26 +6975,6 @@ static void rt2800_init_bbp_5592(struct - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - } - --static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev, -- const u8 reg, const u8 value) --{ -- rt2800_bbp_write(rt2x00dev, 195, reg); -- rt2800_bbp_write(rt2x00dev, 196, value); --} -- --static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev, -- const u8 reg, const u8 value) --{ -- rt2800_bbp_write(rt2x00dev, 158, reg); -- rt2800_bbp_write(rt2x00dev, 159, value); --} -- --static u8 rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, const u8 reg) --{ -- rt2800_bbp_write(rt2x00dev, 158, reg); -- return rt2800_bbp_read(rt2x00dev, 159); --} -- - static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev) - { - u8 bbp; diff --git a/package/kernel/mac80211/patches/rt2x00/989-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/989-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch deleted file mode 100644 index 6472bbc6f1..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/989-rt2x00-fix-HT20-HT40-bandwidth-switch-on-MT7620.patch +++ /dev/null @@ -1,40 +0,0 @@ -From d20eadcb4eac59c5168f48c33836fba32b8cd1ae Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 16 Sep 2022 20:26:03 +0100 -Subject: [PATCH 11/16] rt2x00: fix HT20/HT40 bandwidth switch on MT7620 -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -Add missing configuration of the channel bandwidth filter to the -channel setup function for MT7620. - -Reported-by: Serge Vasilugin -Signed-off-by: Daniel Golle ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -3814,6 +3814,14 @@ static void rt2800_config_channel_rf7620 - rfcsr |= tx_agc_fc; - rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr); - } -+ -+ if (conf_is_ht40(conf)) { -+ rt2800_bbp_glrt_write(rt2x00dev, 141, 0x10); -+ rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2f); -+ } else { -+ rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1a); -+ rt2800_bbp_glrt_write(rt2x00dev, 157, 0x40); -+ } - } - - static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev, diff --git a/package/kernel/mac80211/patches/rt2x00/990-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT762.patch b/package/kernel/mac80211/patches/rt2x00/990-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT762.patch deleted file mode 100644 index 2ab1ccee23..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/990-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT762.patch +++ /dev/null @@ -1,35 +0,0 @@ -From fa8914fe29543be586e9bbc00c7209e2808f0a13 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 16 Sep 2022 20:28:40 +0100 -Subject: [PATCH 12/16] rt2x00: set correct TX_SW_CFG1 MAC register for MT7620 -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the -vendor driver[1]. - -[1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 -Reported-by: Serge Vasilugin -Signed-off-by: Daniel Golle ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -5934,7 +5934,7 @@ static int rt2800_init_registers(struct - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); - } else if (rt2x00_rt(rt2x00dev, RT6352)) { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401); -- rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000); -+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001); - rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); - rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000); - rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0); diff --git a/package/kernel/mac80211/patches/rt2x00/991-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/991-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch deleted file mode 100644 index 4d1700b24e..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/991-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 5b62ef26e5f17c5cdf19c05e32e2c1da9988480d Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 16 Sep 2022 20:31:15 +0100 -Subject: [PATCH 13/16] rt2x00: set VGC gain for both chains of MT7620 -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -Set bbp66 for all chains of the MT7620. - -Reported-by: Serge Vasilugin -Signed-off-by: Daniel Golle ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -5711,7 +5711,8 @@ static inline void rt2800_set_vgc(struct - if (qual->vgc_level != vgc_level) { - if (rt2x00_rt(rt2x00dev, RT3572) || - rt2x00_rt(rt2x00dev, RT3593) || -- rt2x00_rt(rt2x00dev, RT3883)) { -+ rt2x00_rt(rt2x00dev, RT3883) || -+ rt2x00_rt(rt2x00dev, RT6352)) { - rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, - vgc_level); - } else if (rt2x00_rt(rt2x00dev, RT5592)) { diff --git a/package/kernel/mac80211/patches/rt2x00/992-rt2x00-set-SoC-wmac-clock-register.patch b/package/kernel/mac80211/patches/rt2x00/992-rt2x00-set-SoC-wmac-clock-register.patch deleted file mode 100644 index 194d7d6cfd..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/992-rt2x00-set-SoC-wmac-clock-register.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 6569ed4ba88105d7ee877abba8f22e4965a29856 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 16 Sep 2022 20:38:20 +0100 -Subject: [PATCH 14/16] rt2x00: set SoC wmac clock register -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -Instead of using the default value 33 (pci), set US_CYC_CNT init based -on Programming guide: -If available, set chipset bus clock with fallback to cpu clock/3. - -Reported-by: Serge Vasilugin -Signed-off-by: Daniel Golle ---- - .../net/wireless/ralink/rt2x00/rt2800lib.c | 21 +++++++++++++++++++ - 1 file changed, 21 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -6197,6 +6197,27 @@ static int rt2800_init_registers(struct - reg = rt2800_register_read(rt2x00dev, US_CYC_CNT); - rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 125); - rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); -+ } else if (rt2x00_is_soc(rt2x00dev)) { -+ struct clk *clk = clk_get_sys("bus", NULL); -+ int rate; -+ -+ if (IS_ERR(clk)) { -+ clk = clk_get_sys("cpu", NULL); -+ -+ if (IS_ERR(clk)) { -+ rate = 125; -+ } else { -+ rate = clk_get_rate(clk) / 3000000; -+ clk_put(clk); -+ } -+ } else { -+ rate = clk_get_rate(clk) / 1000000; -+ clk_put(clk); -+ } -+ -+ reg = rt2800_register_read(rt2x00dev, US_CYC_CNT); -+ rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, rate); -+ rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); - } - - reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0); diff --git a/package/kernel/mac80211/patches/rt2x00/993-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/993-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch deleted file mode 100644 index 0b673bcc91..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/993-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 3ae108de9e64e44c724ce150d804c56a4e72ea4e Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 16 Sep 2022 20:42:11 +0100 -Subject: [PATCH 15/16] rt2x00: correctly set BBP register 86 for MT7620 -To: linux-wireless@vger.kernel.org, - Stanislaw Gruszka , - Helmut Schaa -Cc: Kalle Valo , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Johannes Berg - -Instead of 0 set the correct value for BBP register 86 for MT7620. - -Reported-by: Serge Vasilugin -Signed-off-by: Daniel Golle ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -4193,7 +4193,10 @@ static void rt2800_config_channel(struct - rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); -- rt2800_bbp_write(rt2x00dev, 86, 0); -+ if (rt2x00_rt(rt2x00dev, RT6352)) -+ rt2800_bbp_write(rt2x00dev, 86, 0x38); -+ else -+ rt2800_bbp_write(rt2x00dev, 86, 0); - } - - if (rf->channel <= 14) { diff --git a/package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch b/package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch index 3d5849b8b2..deaa03be6c 100644 --- a/package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch +++ b/package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch @@ -52,7 +52,7 @@ Signed-off-by: Daniel Golle static const unsigned int rt2800_eeprom_map[EEPROM_WORD_COUNT] = { [EEPROM_CHIP_ID] = 0x0000, [EEPROM_VERSION] = 0x0001, -@@ -4436,6 +4454,29 @@ static void rt2800_config_channel(struct +@@ -4469,6 +4487,29 @@ static void rt2800_config_channel(struct rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN, 0x6C6C6B6C); } @@ -82,7 +82,7 @@ Signed-off-by: Daniel Golle } bbp = rt2800_bbp_read(rt2x00dev, 4); -@@ -10641,6 +10682,7 @@ static void rt2800_init_rfcsr_6352(struc +@@ -10583,6 +10624,7 @@ static void rt2800_init_rfcsr_6352(struc rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00); rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C); @@ -90,7 +90,7 @@ Signed-off-by: Daniel Golle rt2800_r_calibration(rt2x00dev); rt2800_rf_self_txdc_cal(rt2x00dev); rt2800_rxdcoc_calibration(rt2x00dev); -@@ -10648,6 +10690,22 @@ static void rt2800_init_rfcsr_6352(struc +@@ -10590,6 +10632,22 @@ static void rt2800_init_rfcsr_6352(struc rt2800_bw_filter_calibration(rt2x00dev, false); rt2800_loft_iq_calibration(rt2x00dev); rt2800_rxiq_calibration(rt2x00dev); diff --git a/package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch b/package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch index de09186618..dab6e05ffd 100644 --- a/package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch +++ b/package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ralink/rt2x00/rt2800.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h -@@ -1042,6 +1042,11 @@ +@@ -1044,6 +1044,11 @@ #define MIMO_PS_CFG_RX_STBY_POL FIELD32(0x00000010) #define MIMO_PS_CFG_RX_RX_STBY0 FIELD32(0x00000020) @@ -14,7 +14,7 @@ */ --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -3736,14 +3736,16 @@ static void rt2800_config_channel_rf7620 +@@ -3778,14 +3778,16 @@ static void rt2800_config_channel_rf7620 rt2x00_set_field8(&rfcsr, RFCSR19_K, rf->rf4); rt2800_rfcsr_write(rt2x00dev, 19, rfcsr); @@ -39,7 +39,7 @@ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); rt2x00_set_field8(&rfcsr, RFCSR1_TX2_EN_MT7620, -@@ -3777,18 +3779,23 @@ static void rt2800_config_channel_rf7620 +@@ -3819,18 +3821,23 @@ static void rt2800_config_channel_rf7620 rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x20); } @@ -73,9 +73,9 @@ if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) { if (conf_is_ht40(conf)) { -@@ -3896,25 +3903,29 @@ static void rt2800_config_alc(struct rt2 - if (i == 10000) - rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n"); +@@ -3929,25 +3936,29 @@ static void rt2800_config_alc(struct rt2 + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY))) + rt2x00_warn(rt2x00dev, "RF busy while configuring ALC\n"); - if (chan->center_freq > 2457) { - bbp = rt2800_bbp_read(rt2x00dev, 30); @@ -121,7 +121,7 @@ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl); rt2800_vco_calibration(rt2x00dev); -@@ -5978,18 +5989,33 @@ static int rt2800_init_registers(struct +@@ -6011,18 +6022,33 @@ static int rt2800_init_registers(struct } else if (rt2x00_rt(rt2x00dev, RT5350)) { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); } else if (rt2x00_rt(rt2x00dev, RT6352)) { @@ -167,7 +167,7 @@ reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1); rt2x00_set_field32(®, TX_ALC_CFG_1_ROS_BUSY_EN, 0); rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg); -@@ -7134,14 +7160,16 @@ static void rt2800_init_bbp_6352(struct +@@ -7127,14 +7153,16 @@ static void rt2800_init_bbp_6352(struct rt2800_bbp_write(rt2x00dev, 188, 0x00); rt2800_bbp_write(rt2x00dev, 189, 0x00); @@ -192,7 +192,7 @@ /* BBP for G band GLRT function (BBP_128 ~ BBP_221) */ rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00); -@@ -10466,31 +10494,36 @@ static void rt2800_init_rfcsr_6352(struc +@@ -10408,31 +10436,36 @@ static void rt2800_init_rfcsr_6352(struc rt2800_rfcsr_write(rt2x00dev, 42, 0x5B); rt2800_rfcsr_write(rt2x00dev, 43, 0x00); @@ -254,7 +254,7 @@ /* Initialize RF channel register to default value */ rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03); -@@ -10556,63 +10589,71 @@ static void rt2800_init_rfcsr_6352(struc +@@ -10498,63 +10531,71 @@ static void rt2800_init_rfcsr_6352(struc rt2800_rfcsr_write_bank(rt2x00dev, 6, 45, 0xC5); @@ -383,7 +383,7 @@ /* Initialize RF DC calibration register to default value */ rt2800_rfcsr_write_dccal(rt2x00dev, 0, 0x47); -@@ -10675,12 +10716,17 @@ static void rt2800_init_rfcsr_6352(struc +@@ -10617,12 +10658,17 @@ static void rt2800_init_rfcsr_6352(struc rt2800_rfcsr_write_dccal(rt2x00dev, 62, 0x00); rt2800_rfcsr_write_dccal(rt2x00dev, 63, 0x00);