From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Wed, 5 Aug 2015 17:45:20 +0000 (-0700)
Subject: staging: comedi: me4000: usleep_range is preferred over udelay
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3fe6929bbbca11b015d182d4864d92d0bf5c244d;p=openwrt%2Fstaging%2Fblogic.git

staging: comedi: me4000: usleep_range is preferred over udelay

Fix checkpatch issue: "CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt".  `udelay()` is only used in the
firmware upload process.  Replace them with `usleep_range()` with a
reasonable upper limit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 3974f59c0478..74c16dbd1f8b 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -345,7 +345,7 @@ static int me4000_xilinx_download(struct comedi_device *dev,
 	inb(xilinx_iobase + 0xC8);
 
 	/* Wait until /INIT pin is set */
-	udelay(20);
+	usleep_range(20, 1000);
 	val = inl(devpriv->plx_regbase + PLX9052_INTCSR);
 	if (!(val & PLX9052_INTCSR_LI2STAT)) {
 		dev_err(dev->class_dev, "Can't init Xilinx\n");
@@ -362,11 +362,11 @@ static int me4000_xilinx_download(struct comedi_device *dev,
 		      (((unsigned int)data[1] & 0xff) << 16) +
 		      (((unsigned int)data[2] & 0xff) << 8) +
 		      ((unsigned int)data[3] & 0xff);
-	udelay(10);
+	usleep_range(10, 1000);
 
 	for (i = 0; i < file_length; i++) {
 		outb(data[16 + i], xilinx_iobase);
-		udelay(10);
+		usleep_range(10, 1000);
 
 		/* Check if BUSY flag is low */
 		val = inl(devpriv->plx_regbase + PLX9052_CNTRL);