From: Stijn Tintel Date: Fri, 6 Aug 2021 23:41:11 +0000 (+0300) Subject: qoriq: add support for WatchGuard Firebox M300 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3fda16078b9979be836df0d156ca0dc0a0778f91;p=openwrt%2Fstaging%2Fnbd.git qoriq: add support for WatchGuard Firebox M300 This device is based on NXP's QorIQ T2081QDS board, with a quad-core dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5 ethernet interfaces, of which 3 are connected to the ethernet ports on the front panel. The other 2 are internally connected to a Marvell 88E6171 switch; the other 5 ports of this switch are also connected to the ethernet ports on the front panel. Installation: write the sdcard image to an SD card. Stock U-Boot will not boot, wait for it to fail then run these commands: setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr' saveenv reset The default U-Boot boot entry will now boot OpenWrt from the SD card. Signed-off-by: Stijn Tintel Acked-by: Rui Salvaterra --- diff --git a/package/boot/uboot-envtools/files/qoriq b/package/boot/uboot-envtools/files/qoriq new file mode 100644 index 0000000000..d024a7f008 --- /dev/null +++ b/package/boot/uboot-envtools/files/qoriq @@ -0,0 +1,19 @@ +[ -e /etc/config/ubootenv ] && exit 0 + +touch /etc/config/ubootenv + +. /lib/uboot-envtools.sh +. /lib/functions.sh + +board=$(board_name) + +case "$board" in +watchguard,firebox-m300) + ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x2000" "0x10000" + ;; +esac + +config_load ubootenv +config_foreach ubootenv_add_app_config ubootenv + +exit 0 diff --git a/target/linux/qoriq/base-files/etc/board.d/02_network b/target/linux/qoriq/base-files/etc/board.d/02_network new file mode 100644 index 0000000000..35b7ce9f32 --- /dev/null +++ b/target/linux/qoriq/base-files/etc/board.d/02_network @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +. /lib/functions/uci-defaults.sh +. /lib/functions.sh +. /lib/functions/system.sh + +board_config_update +board=$(board_name) + +wg_set_opt_interface() { + local device="$1" + local offset="$2" + + ucidef_set_interface "$device" device "$device" protocol static ipaddr "10.0.${offset}.1" netmask 255.255.255.0 +} + +case "$board" in +watchguard,firebox-m300) + ucidef_set_interfaces_lan_wan "eth1" "eth0" + wg_set_opt_interface "eth2" "2" + + sweth_mac_offset=0x186d + + for sweth in /sys/class/net/sweth*; do + device="$(basename "$sweth")" + mac="$(mtd_get_mac_text wg_cfg0 "$sweth_mac_offset")" + switchports="$switchports $device" + ucidef_set_network_device_mac "$device" "$mac" + wg_set_opt_interface "$device" "${device#sweth}" + sweth_mac_offset=$(printf "0x%X\n" $(( $sweth_mac_offset + 0x14))) + done + + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/qoriq/base-files/lib/preinit/79_move_config b/target/linux/qoriq/base-files/lib/preinit/79_move_config new file mode 100644 index 0000000000..54dd579660 --- /dev/null +++ b/target/linux/qoriq/base-files/lib/preinit/79_move_config @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +. /lib/functions.sh +. /lib/upgrade/common.sh + +move_config() { + local partdev + + if export_bootdevice && export_partdevice partdev 1; then + mkdir -p /boot + mount -o rw,noatime "/dev/$partdev" /boot + [ -f "/boot/$BACKUP_FILE" ] && mv -f "/boot/$BACKUP_FILE" / + umount /boot + fi +} + +boot_hook_add preinit_mount_root move_config diff --git a/target/linux/qoriq/base-files/lib/upgrade/platform.sh b/target/linux/qoriq/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..1392d5eb22 --- /dev/null +++ b/target/linux/qoriq/base-files/lib/upgrade/platform.sh @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + case "$(board_name)" in + watchguard,firebox-m300) + legacy_sdcard_check_image "$1" + ;; + *) + return 0 + ;; + esac +} + +platform_copy_config() { + case "$(board_name)" in + watchguard,firebox-m300) + legacy_sdcard_copy_config "$1" + ;; + *) + return 0 + esac +} + +platform_do_upgrade() { + case "$(board_name)" in + watchguard,firebox-m300) + legacy_sdcard_do_upgrade "$1" + ;; + *) + default_do_upgrade "$1" + ;; + esac +} diff --git a/target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts b/target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts new file mode 100644 index 0000000000..54f7e06bc5 --- /dev/null +++ b/target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later +/* + * WatchGuard Firebox M300 Device Tree Source + * Based on t2081qds.dts from Linux 5.10 + * + * Copyright 2013 - 2015 Freescale Semiconductor Inc. + * Copyright 2020 - 2021 Stijn Tintel + */ + +/include/ "t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "WatchGuard Firebox M300"; + compatible = "watchguard,firebox-m300", "fsl,T2081QDS"; + + interrupt-parent = <&mpic>; + + aliases { + /delete-property/ ethernet0; + /delete-property/ ethernet1; + /delete-property/ ethernet2; + /delete-property/ ethernet3; + /delete-property/ ethernet4; + /delete-property/ ethernet5; + /delete-property/ ethernet6; + /delete-property/ ethernet7; + + ethernet0 = &enet7; + ethernet1 = &enet0; + ethernet2 = &enet1; + ethernet3 = &enet2; + ethernet4 = &enet3; + }; +}; + +&soc { +// Include first to make this the first interface +/include/ "qoriq-fman3-0-10g-1.dtsi" +}; + +// mdio-mux under &boardctrl + its aliases removed. causes crash: +// Oops: Machine check, sig: 7 [#1] + +/include/ "t2081si-post.dtsi" + +// add stuff below the include to make sure we override whatever is there + +&enet0 { + phy-connection-type = "sgmii"; + phy-handle = <&phy1>; +}; + +&enet1 { + phy-connection-type = "sgmii"; + phy-handle = <&phy2>; +}; + +&enet2 { + phy-connection-type = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&enet3 { + phy-connection-type = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&enet4 { + status = "disabled"; +}; + +&enet5 { + status = "disabled"; +}; + +&enet6 { + status = "disabled"; +}; + +&enet7 { + phy-connection-type = "sgmii"; + phy-handle = <&phy0>; +}; + +&ifc { + ranges = <0x00 0x00 0x0f 0xefc00000 0x400000>; + + nor@0,0 { + reg = <0x00 0x00 0x400000>; + + partition@0{ + reg = <0x0 0x10000>; + label = "qoriq-rcw"; + read-only; + }; + + partition@10000 { + reg = <0x10000 0x20000>; + label = "wg_cfg0"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "wg_cfg1"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x10000>; + label = "wg_mfg_data"; + read-only; + }; + + partition@50000 { + reg = <0x50000 0xb0000>; + label = "wg_bootopt_data_and_reserved"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0xb0000>; + label = "wg_extra_reserved_1"; + read-only; + }; + + partition@1B0000 { + reg = <0x1b0000 0xb0000>; + label = "wg_extra_reserved_2"; + read-only; + }; + + partition@260000 { + reg = <0x260000 0xc0000>; + label = "wg_u-boot_failsafe"; + read-only; + }; + + partition@320000 { + reg = <0x320000 0x10000>; + label = "qoriq-fman"; + read-only; + }; + + partition@330000 { + reg = <0x330000 0x10000>; + label = "u-boot-env"; + }; + + partition@340000 { + reg = <0x340000 0xc0000>; + label = "u-boot"; + read-only; + }; + }; + + nand@2,0 { + status = "disabled"; + }; +}; + +&mdio0 { + // m300 ethernet port 0 + phy0: ethernet-phy@0 { + reg = <0x00>; + }; + + // m300 ethernet port 1 + phy1: ethernet-phy@1 { + reg = <0x01>; + }; + + phy2: ethernet-phy@2 { + reg = <0x02>; + }; + + phy3: ethernet-phy@3 { + reg = <0x03>; + }; + + switch0: switch@10 { + compatible = "marvell,mv88e6085"; + reg = <0x10>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@0 { + reg = <0x00>; + interrupt-parent = <&switch0>; + }; + + switch0phy1: switch0phy1@1 { + reg = <0x01>; + interrupt-parent = <&switch0>; + }; + + switch0phy2: switch0phy2@2 { + reg = <0x02>; + interrupt-parent = <&switch0>; + }; + + switch0phy3: switch0phy3@3 { + reg = <0x03>; + interrupt-parent = <&switch0>; + }; + + switch0phy4: switch0phy4@4 { + reg = <0x04>; + interrupt-parent = <&switch0>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "sweth3"; + phy-handle = <&switch0phy0>; + }; + + port@1 { + reg = <1>; + label = "sweth4"; + phy-handle = <&switch0phy1>; + }; + + port@2 { + reg = <2>; + label = "sweth5"; + phy-handle = <&switch0phy2>; + }; + + port@3 { + reg = <3>; + label = "sweth6"; + phy-handle = <&switch0phy3>; + }; + + port@4 { + reg = <4>; + label = "sweth7"; + phy-handle = <&switch0phy4>; + }; + + // OEM bootlog suggests multiple ports are attached to switch + // Keep this until OEM supplies GPL sources + port@5 { + status = "disabled"; + + reg = "<5>"; + label = "cpu"; + ethernet = <&enet2>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&enet3>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&soc { + i2c@118000 { + tpm@29 { + compatible = "tpm,tpm_i2c_atmel"; + reg = <0x29>; + }; + hwmon@2c { + compatible = "winbond,w83793"; + reg = <0x2c>; + }; + hwmon@2d { + compatible = "winbond,w83793"; + reg = <0x2d>; + }; + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + pca9547@77 { + status = "disabled"; + }; + }; + + spi@110000 { + // DTS decompiled from OEM DTB contains flash@0 but doesn't work + // spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff + // disable for now + flash@0 { + status = "disabled"; + }; + + flash@1 { + status = "disabled"; + }; + + flash@2 { + status = "disabled"; + }; + }; +}; diff --git a/target/linux/qoriq/image/generic.mk b/target/linux/qoriq/image/generic.mk index e69de29bb2..0d7f5e4c10 100644 --- a/target/linux/qoriq/image/generic.mk +++ b/target/linux/qoriq/image/generic.mk @@ -0,0 +1,12 @@ +define Device/watchguard_firebox-m300 + DEVICE_VENDOR := WatchGuard + DEVICE_MODEL := Firebox M300 + DEVICE_DTS_DIR := $(DTS_DIR)/fsl + DEVICE_PACKAGES := \ + kmod-hwmon-w83793 kmod-ptp-qoriq kmod-rtc-rs5c372a kmod-tpm-i2c-atmel + KERNEL := kernel-bin | gzip | uImage gzip + IMAGES := sdcard.img.gz sysupgrade.img.gz + IMAGE/sysupgrade.img.gz := sdcard-img | gzip | append-metadata + IMAGE/sdcard.img.gz := sdcard-img | gzip +endef +TARGET_DEVICES += watchguard_firebox-m300