From: David Lechner Date: Sun, 19 Nov 2017 20:12:06 +0000 (-0600) Subject: dt-bindings: Add binding for Ilitek ILI9225 display panels X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3fd8d9e00f44b7057aa02a50b06e8320cc822526;p=openwrt%2Fstaging%2Fblogic.git dt-bindings: Add binding for Ilitek ILI9225 display panels This adds a new binding for display panels that use an Ilitek ILI9225 controller. The "ilitek,ili9225-2.2in-176x220" device listed has no identification markings whatsoever and an hour of googling turned up nothing, hence the use of the size and resolution in the name instead of a model name. An example of this nameless device can be found at: https://github.com/Nkawu/TFT_22_ILI9225 Signed-off-by: David Lechner Acked-by: Rob Herring Signed-off-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/msgid/1511122328-31133-3-git-send-email-david@lechnology.com --- diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9225.txt b/Documentation/devicetree/bindings/display/ilitek,ili9225.txt new file mode 100644 index 000000000000..21607a541c33 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9225.txt @@ -0,0 +1,25 @@ +Ilitek ILI9225 display panels + +This binding is for display panels using an Ilitek ILI9225 controller in SPI +mode. + +Required properties: +- compatible: "ilitek,ili9225-2.2in-176x220" +- rs-gpios: Register select signal +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + display@0{ + compatible = "ilitek,ili9225-2.2in-176x220"; + reg = <0>; + spi-max-frequency = <12000000>; + rs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + };