From: Waldemar Brodkorb Date: Thu, 17 Feb 2005 23:22:22 +0000 (+0000) Subject: add 2.4.29 dmesg X-Git-Tag: reboot~33456 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3f9367aebad2aaca54f3bff69133b7a2663e3b99;p=openwrt%2Fopenwrt.git add 2.4.29 dmesg SVN-Revision: 255 --- diff --git a/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt b/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt new file mode 100644 index 0000000000..20e1c95e1b --- /dev/null +++ b/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt @@ -0,0 +1,95 @@ +CPU revision is: 00024000 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005 +Determined physical RAM map: +memory: 01000000 @ 00000000 (usable) +On node 0 totalpages: 4096 +zone(0): 4096 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4710 rev 0 at 125 MHz +Using 62.400 MHz high precision timer. +!unable to setup serial console! +Calibrating delay loop... 82.94 BogoMIPS +Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) +Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) +Inode cache hash table entries: 1024 (order: 1, 8192 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 4096 (order: 2, 16384 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Fixing up bus 0 +PCI: Fixing up bridge +PCI: Setting latency timer of device 01:00.0 to 64 +PCI: Fixing up bus 1 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +PPP generic driver version 2.4.2 +Amd/Fujitsu Extended Query Table v1.0 at 0x0040 +Physically mapped flash: JEDEC Device ID is 0xCA. Assuming broken CFI table. +Physically mapped flash: Swapping erase regions for broken CFI table. +number of CFI chips: 1 +cfi_cmdset_0002: Disabling fast programming due to code brokenness. +Flash device: 0x400000 at 0x1fc00000 +Physically mapped flash: squashfs filesystem found at block 946 +Creating 5 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x003f0000 : "linux" +0x000ec990-0x001ceb48 : "rootfs" +mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only +0x003f0000-0x00400000 : "nvram" +0x001d0000-0x003f0000 : "OpenWrt" +sflash: chipcommon not found +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 1024 bind 2048) +ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (squashfs filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 100k freed +Warning: unable to open an initial console. +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 0000041a +using v1 hardware +led -> 00 +led -> 01 +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=FFFFFFFF +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:08.0 to 64 +5325E phy=FFFFFFFF +eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 01:02.0 to 64 +PCI: Enabling device 01:02.0 (0004 -> 0006) +eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +device eth2 entered promiscuous mode +eth2: attempt to add interface with same source address. +br0: port 2(eth2) entering learning state +br0: port 1(eth0) entering learning state +br0: port 2(eth2) entering forwarding state +br0: topology change detected, propagating +br0: port 1(eth0) entering forwarding state +br0: topology change detected, propagating +led -> 00