From: Manoharan, Rajkumar Date: Tue, 14 Feb 2017 20:27:16 +0000 (-0800) Subject: mac80211: use DECLARE_EWMA for mesh_fail_avg X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3eb0928fc3e4b4702462164b399acddb7f0f09fd;p=openwrt%2Fstaging%2Fblogic.git mac80211: use DECLARE_EWMA for mesh_fail_avg As moving average is not considering fractional part, it will get stuck at the same level after certain state. For example, with current values, it can get stuck at 96. Fortunately the current threshold 95%, but if it were increased to 96 or more mesh paths would never be deactivated. Fix failure average movement by using EWMA helpers, which does take into account fractional parts. Signed-off-by: Rajkumar Manoharan [johannes: pick a larger EWMA factor for more precision with the limited range that we will feed into it, adjust to new API] Signed-off-by: Johannes Berg --- diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index b747c9645e43..d07ee3ca07ee 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -307,10 +307,11 @@ void ieee80211s_update_metric(struct ieee80211_local *local, failed = !(txinfo->flags & IEEE80211_TX_STAT_ACK); - /* moving average, scaled to 100 */ - sta->mesh->fail_avg = - ((80 * sta->mesh->fail_avg + 5) / 100 + 20 * failed); - if (sta->mesh->fail_avg > 95) + /* moving average, scaled to 100. + * feed failure as 100 and success as 0 + */ + ewma_mesh_fail_avg_add(&sta->mesh->fail_avg, failed * 100); + if (ewma_mesh_fail_avg_read(&sta->mesh->fail_avg) > 95) mesh_plink_broken(sta); } @@ -325,6 +326,8 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, int rate, err; u32 tx_time, estimated_retx; u64 result; + unsigned long fail_avg = + ewma_mesh_fail_avg_read(&sta->mesh->fail_avg); /* Try to get rate based on HW/SW RC algorithm. * Rate is returned in units of Kbps, correct this @@ -336,7 +339,7 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, if (rate) { err = 0; } else { - if (sta->mesh->fail_avg >= 100) + if (fail_avg >= 100) return MAX_METRIC; sta_set_rate_info_tx(sta, &sta->tx_stats.last_rate, &rinfo); @@ -344,7 +347,7 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, if (WARN_ON(!rate)) return MAX_METRIC; - err = (sta->mesh->fail_avg << ARITH_SHIFT) / 100; + err = (fail_avg << ARITH_SHIFT) / 100; } /* bitrate is in units of 100 Kbps, while we need rate in units of @@ -484,6 +487,9 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, ? mpath->exp_time : exp_time; mesh_path_activate(mpath); spin_unlock_bh(&mpath->state_lock); + ewma_mesh_fail_avg_init(&sta->mesh->fail_avg); + /* init it at a low value - 0 start is tricky */ + ewma_mesh_fail_avg_add(&sta->mesh->fail_avg, 1); mesh_path_tx_pending(mpath); /* draft says preq_id should be saved to, but there does * not seem to be any use for it, skipping by now @@ -522,6 +528,9 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, ? mpath->exp_time : exp_time; mesh_path_activate(mpath); spin_unlock_bh(&mpath->state_lock); + ewma_mesh_fail_avg_init(&sta->mesh->fail_avg); + /* init it at a low value - 0 start is tricky */ + ewma_mesh_fail_avg_add(&sta->mesh->fail_avg, 1); mesh_path_tx_pending(mpath); } else spin_unlock_bh(&mpath->state_lock); diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index f0e6175a9821..98a3b1c0c338 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -829,6 +829,9 @@ void mesh_path_fix_nexthop(struct mesh_path *mpath, struct sta_info *next_hop) mpath->flags = MESH_PATH_FIXED | MESH_PATH_SN_VALID; mesh_path_activate(mpath); spin_unlock_bh(&mpath->state_lock); + ewma_mesh_fail_avg_init(&next_hop->mesh->fail_avg); + /* init it at a low value - 0 start is tricky */ + ewma_mesh_fail_avg_add(&next_hop->mesh->fail_avg, 1); mesh_path_tx_pending(mpath); } diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index e65cda34d2bc..cc413f52108e 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -324,6 +324,9 @@ struct ieee80211_fast_rx { struct rcu_head rcu_head; }; +/* we use only values in the range 0-100, so pick a large precision */ +DECLARE_EWMA(mesh_fail_avg, 20, 8) + /** * struct mesh_sta - mesh STA information * @plink_lock: serialize access to plink fields @@ -369,7 +372,7 @@ struct mesh_sta { enum nl80211_mesh_power_mode nonpeer_pm; /* moving percentage of failed MSDUs */ - unsigned int fail_avg; + struct ewma_mesh_fail_avg fail_avg; }; DECLARE_EWMA(signal, 10, 8)