From: Edmunt Pienkowsky <roed@onet.eu>
Date: Sat, 21 Oct 2017 09:07:43 +0000 (+0200)
Subject: ramips: fix Youku-YK1 support
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3eae19acee79d40ecb151a23f1f79110995f9386;p=openwrt%2Fstaging%2Fhauke.git

ramips: fix Youku-YK1 support

Remove the ephy-pins from the ethernet device tree node. The ephy-pins
are useed to controll the ePHY LEDs and this board doesn't have these.
Instead one of the ePHY pins is used in GPIO mode to control the WAN
LED.

Use the switch LED trigger to control the WAN LED. Move the power LED
handling to diag.sh to show the boot status via this LED.

Add the missing kernel packages for USB and microSD card reader to the
default package selection.

Fix the maximum image size value. The board has a 32MByte flash chip.

Fixes: FS#1055

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
[make the commit message more verbose, remove GPIO pinmux for pins not
used as GPIOs]
Signed-off-by: Mathias Kresin <dev@kresin.me>
---

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 2956defca8..e8c29fa037 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -387,9 +387,9 @@ zte-q7)
 	set_wifi_led "$board:blue:status"
 	;;
 youku-yk1)
-	ucidef_set_led_default "power" "power" "$board:blue:power" "1"
 	set_wifi_led "$board:blue:air"
 	set_usb_led "$board:blue:usb"
+	ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x10"
 	;;
 esac
 
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index cf3d2ca9c9..fa0391ca9b 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -122,7 +122,8 @@ get_status_led() {
 	wli-tx4-ag300n|\
 	wt3020|\
 	y1|\
-	y1s)
+	y1s|\
+	youku-yk1)
 		status_led="$board:blue:power"
 		;;
 	db-wrt01|\
diff --git a/target/linux/ramips/dts/YOUKU-YK1.dts b/target/linux/ramips/dts/YOUKU-YK1.dts
index 260f86ab96..8c87981edf 100644
--- a/target/linux/ramips/dts/YOUKU-YK1.dts
+++ b/target/linux/ramips/dts/YOUKU-YK1.dts
@@ -95,7 +95,7 @@
 &pinctrl {
 	state_default: pinctrl0 {
 		default {
-			ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+			ralink,group = "i2c", "rgmii1", "ephy", "wled";
 			ralink,function = "gpio";
 		};
 	};
@@ -103,7 +103,6 @@
 
 &ethernet {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ephy_pins>;
 	mtd-mac-address = <&factory 0x4>;
 	mediatek,portmap = "llllw";
 };
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index ccf8d521f5..1736d9f480 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -382,8 +382,9 @@ TARGET_DEVICES += zte-q7
 
 define Device/youku-yk1
   DTS := YOUKU-YK1
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+  IMAGE_SIZE := $(ralink_default_fw_size_32M)
   DEVICE_TITLE := YOUKU YK1
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += youku-yk1