From: Daniel Golle Date: Mon, 7 Oct 2024 14:33:21 +0000 (+0100) Subject: mediatek: use NVMEM framework on all Adtran devices X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3e6de5d77a8b8cda1e02250179d964b840c203fa;p=openwrt%2Fstaging%2Fnbd.git mediatek: use NVMEM framework on all Adtran devices Use NVMEM framework to assign MAC addresses and WiFi EEPROM data on all Adtran SmartRG devices. Signed-off-by: Daniel Golle --- diff --git a/target/linux/mediatek/dts/mt7986a-smartrg-bonanza-peak.dtsi b/target/linux/mediatek/dts/mt7986a-smartrg-bonanza-peak.dtsi index 038a76ad73..deab53dc45 100644 --- a/target/linux/mediatek/dts/mt7986a-smartrg-bonanza-peak.dtsi +++ b/target/linux/mediatek/dts/mt7986a-smartrg-bonanza-peak.dtsi @@ -14,8 +14,7 @@ / { aliases { serial0 = &uart0; - ethernet0 = &gmac0; - ethernet1 = &gmac1; + label-mac-device = &gmac1; led-boot = &led_status_green; led-failsafe = &led_status_red; led-running = &led_status_white; @@ -188,16 +187,17 @@ gmac0: mac@0 { compatible = "mediatek,eth-mac"; reg = <0>; - + nvmem-cells = <&macaddr 1>; + nvmem-cell-names = "mac-address"; phy-mode = "2500base-x"; }; gmac1: mac@1 { - label = "wan"; - compatible = "mediatek,eth-mac"; reg = <1>; - + label = "wan"; + nvmem-cells = <&macaddr 0>; + nvmem-cell-names = "mac-address"; phy-mode = "2500base-x"; }; @@ -254,6 +254,47 @@ no-sd; no-sdio; status = "okay"; + + card@0 { + compatible = "mmc-card"; + reg = <0>; + + block { + compatible = "block-device"; + + partitions { + block-partition-factory { + partname = "factory"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + eeprom_factory_a0000: eeprom@a0000 { + reg = <0xa0000 0x1000>; + }; + }; + }; + + block-partition-mfginfo { + partname = "mfginfo"; + + nvmem-layout { + compatible = "adtran,mfginfo"; + + macaddr: mfg-mac { + #nvmem-cell-cells = <1>; + }; + }; + }; + }; + }; + }; }; &pcie { @@ -266,6 +307,9 @@ radio0: mt7915@0,0 { reg = <0x0000 0 0 0 0>; + + nvmem-cells = <&eeprom_factory_a0000>, <&macaddr 4>; + nvmem-cell-names = "eeprom", "mac-address"; }; }; }; @@ -275,9 +319,28 @@ }; &wifi { - status = "okay"; + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; pinctrl-names = "default"; pinctrl-0 = <&wf_2g_5g_pins>; + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + band@0 { + /* 2.4 GHz */ + reg = <0>; + nvmem-cells = <&macaddr 2>; + nvmem-cell-names = "mac-address"; + }; + + band@1 { + /* lower 5 GHz */ + reg = <1>; + nvmem-cells = <&macaddr 3>; + nvmem-cell-names = "mac-address"; + }; }; &pio { diff --git a/target/linux/mediatek/dts/mt7988a-smartrg-mt-stuart.dtsi b/target/linux/mediatek/dts/mt7988a-smartrg-mt-stuart.dtsi index ccf85fc110..a3db288d27 100644 --- a/target/linux/mediatek/dts/mt7988a-smartrg-mt-stuart.dtsi +++ b/target/linux/mediatek/dts/mt7988a-smartrg-mt-stuart.dtsi @@ -15,8 +15,7 @@ / { aliases { serial0 = &uart0; - ethernet0 = &gmac0; - ethernet1 = &gmac1; + label-mac-device = &gmac1; led-boot = &led_sys_green; led-failsafe = &led_sys_blue; led-running = &led_sys_white; @@ -250,21 +249,30 @@ }; &gmac0 { + nvmem-cells = <&macaddr 1>; + nvmem-cell-names = "mac-address"; + status = "okay"; }; &gmac1 { + nvmem-cells = <&macaddr 0>; + nvmem-cell-names = "mac-address"; label = "wan"; - status = "okay"; phy-mode = "usxgmii"; + + status = "okay"; }; &gmac2 { + nvmem-cells = <&macaddr 1>; + nvmem-cell-names = "mac-address"; label = "lan1"; - status = "okay"; phy-mode = "usxgmii"; phy-connection-type = "usxgmii"; phy = <&phy8>; + + status = "okay"; }; &gsw_phy0 { @@ -513,6 +521,18 @@ }; }; }; + + block-partition-mfginfo { + partname = "mfginfo"; + + nvmem-layout { + compatible = "adtran,mfginfo"; + + macaddr: mfg-mac { + #nvmem-cell-cells = <1>; + }; + }; + }; }; }; }; @@ -532,6 +552,27 @@ nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <2400000 2500000>, <5170000 5835000>, <5945000 7125000>; + + band@0 { + /* 2.4 GHz */ + reg = <0>; + nvmem-cells = <&macaddr 4>; + nvmem-cell-names = "mac-address"; + }; + + band@1 { + /* 5 GHz */ + reg = <1>; + nvmem-cells = <&macaddr 10>; + nvmem-cell-names = "mac-address"; + }; + + band@2 { + /* 6 GHz */ + reg = <2>; + nvmem-cells = <&macaddr 6>; + nvmem-cell-names = "mac-address"; + }; }; }; }; diff --git a/target/linux/mediatek/dts/mt7988d-smartrg-SDG-8733A.dts b/target/linux/mediatek/dts/mt7988d-smartrg-SDG-8733A.dts index 54fbbea0ba..b72ef48bea 100644 --- a/target/linux/mediatek/dts/mt7988d-smartrg-SDG-8733A.dts +++ b/target/linux/mediatek/dts/mt7988d-smartrg-SDG-8733A.dts @@ -62,6 +62,8 @@ &gmac1 { label = "lan"; + nvmem-cells = <&macaddr 1>; + nvmem-cell-names = "mac-address"; phy-mode = "internal"; phy-connection-type = "internal"; phy = <&int_2p5g_phy>; @@ -69,6 +71,8 @@ &gmac2 { label = "wan"; + nvmem-cells = <&macaddr 0>; + nvmem-cell-names = "mac-address"; phy-mode = "usxgmii"; phy-connection-type = "usxgmii"; phy = <&phy8>; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 74ee571bc0..d532d75b99 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -162,16 +162,6 @@ mediatek_setup_macs() wan_mac=$label_mac lan_mac=$(macaddr_add "$label_mac" 1) ;; - smartrg,sdg-8612|\ - smartrg,sdg-8614|\ - smartrg,sdg-8622|\ - smartrg,sdg-8632|\ - smartrg,sdg-8733|\ - smartrg,sdg-8734) - label_mac=$(mmc_get_mac_ascii mfginfo MFG_MAC) - wan_mac=$label_mac - lan_mac=$(macaddr_add "$label_mac" 1) - ;; xiaomi,mi-router-ax3000t|\ xiaomi,mi-router-ax3000t-ubootmod|\ xiaomi,mi-router-wr30u-stock|\ diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata index c6900e6ebd..d97e5c8354 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata @@ -7,21 +7,6 @@ board=$(board_name) case "$FIRMWARE" in -"mediatek/mt7915_eeprom.bin") - case "$board" in - smartrg,sdg-8622) - caldata_extract_mmc "factory" 0xa0000 0x1000 - ;; - esac - ;; -"mediatek/mt7916_eeprom.bin") - case "$board" in - acer,predator-w6|\ - smartrg,sdg-8632) - caldata_extract_mmc "factory" 0xa0000 0x1000 - ;; - esac - ;; "mediatek/mt7981_eeprom_mt7976_dbdc.bin") case "$board" in ubnt,unifi-6-plus) @@ -36,12 +21,6 @@ case "$FIRMWARE" in ln -sf /tmp/tp_data/MT7986_EEPROM.bin \ /lib/firmware/$FIRMWARE ;; - smartrg,sdg-8612|\ - smartrg,sdg-8614|\ - smartrg,sdg-8622|\ - smartrg,sdg-8632) - caldata_extract_mmc "factory" 0x0 0x1000 - ;; esac ;; "mediatek/mt7986_eeprom_mt7976.bin") diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 3600e32340..3042858353 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -139,23 +139,6 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress ;; - smartrg,sdg-8612|\ - smartrg,sdg-8614|\ - smartrg,sdg-8622|\ - smartrg,sdg-8632) - addr=$(mmc_get_mac_ascii mfginfo MFG_MAC) - [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress - [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress - [ "$PHYNBR" = "2" ] && macaddr_add $addr 4 > /sys${DEVPATH}/macaddress - ;; - smartrg,sdg-8733|\ - smartrg,sdg-8733a|\ - smartrg,sdg-8734) - addr=$(mmc_get_mac_ascii mfginfo MFG_MAC) - [ "$PHYNBR" = "0" ] && macaddr_add $addr 4 > /sys${DEVPATH}/macaddress - [ "$PHYNBR" = "1" ] && macaddr_add $addr a > /sys${DEVPATH}/macaddress - [ "$PHYNBR" = "2" ] && macaddr_add $addr 6 > /sys${DEVPATH}/macaddress - ;; tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ tplink,tl-xdr6088) diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh index 65bd517824..0497d7dfa2 100644 --- a/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh +++ b/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh @@ -22,26 +22,6 @@ preinit_set_mac_address() { addr=$(get_mac_binary "/tmp/tp_data/default-mac" 0) ip link set dev eth1 address "$(macaddr_add $addr 1)" ;; - smartrg,sdg-8612|\ - smartrg,sdg-8614|\ - smartrg,sdg-8733|\ - smartrg,sdg-8734) - addr=$(mmc_get_mac_ascii mfginfo MFG_MAC) - lan_addr=$(macaddr_add $addr 1) - ip link set dev wan address "$addr" - ip link set dev eth0 address "$lan_addr" - ip link set dev lan1 address "$lan_addr" - ip link set dev lan2 address "$lan_addr" - ip link set dev lan3 address "$lan_addr" - ip link set dev lan4 address "$lan_addr" - ;; - smartrg,sdg-8622|\ - smartrg,sdg-8632|\ - smartrg,sdg-8733a) - addr=$(mmc_get_mac_ascii mfginfo MFG_MAC) - ip link set dev wan address "$addr" - ip link set dev lan address "$(macaddr_add $addr 1)" - ;; *) ;; esac