From: Ashley Lee Date: Sat, 30 Dec 2023 14:54:54 +0000 (+0800) Subject: mediatek: add support for Ruijie RG-X60 Pro X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3de3c2bdfa6b757a1ac9fa4d9905e0d268d98e5f;p=openwrt%2Fstaging%2Fblogic.git mediatek: add support for Ruijie RG-X60 Pro This pull request ports Ruijie RG-X60 Pro router support to the main branch. Parameters: - SoC : MediaTek MT7986A Quad-core ARM Cortex-A53 2.0GHz - RAM : DDR3 512MiB (W634GU6QB) - Flash : SPI-NAND 128 MiB (W25N01GVZEIG) - WLAN : MediaTek MT7986A integration dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 4x4 - 5 GHz : a/n/ac/ax, MIMO 4x4 - Ethernet : 10/100/1000 Mbps x4 (MediaTek MT7531AE) 2500Mbps x 1 (Realtek RTL8221B-VB-CG) - UART : through-hole on PCB - [J500] GND, TX, RX, 3.3V (115200n1) - Buttons : Mesh, Reset - LEDs : 1x Power (Blue) 1x Turbo (Purple) - Power : 12 VDC, 3 A How to Installation: 1. Remove the case and connect the TTL cable to the corresponding position. 2. Power on the device and quickly press "down" on the keyboard, then U-Boot will stay in the menu. 3. Select "1. Upgrade Firmware", select "0. TFTP Client(Default)". 4. Input the IP address, input the Openwrt image file name to be flashed, start the TFTP server, and press "Enter". 5. Wait for the flashing to complete. How return to stock: 1. Remove the case and connect the TTL cable to the corresponding position. 2. Power on the device and quickly press "down" on the keyboard, then U-Boot will stay in the menu. 3. Select "1. Upgrade Firmware", select "0. TFTP Client(Default)". 4. Input the IP address, input the Stock “E-WEBOS” image file name to be flashed, start the TFTP server, and press "Enter". 5. Wait for the flashing to complete. About recovery: Connect uart, use u-boot menu to flash stock firmware image or boot OpenWrt initramfs image. About MAC Address: +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | WAN | 10:82:3D:XX:XX:9E | label | | LAN | 10:82:3D:XX:XX:9F | label+1 | | WLAN 2g | 10:82:3D:XX:XX:A0 | label+2 | | WLAN 5g | 10:82:3D:XX:XX:A1 | label+3 | +---------+-------------------+-----------+ Signed-off-by: Ashley Lee --- diff --git a/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts b/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts new file mode 100644 index 000000000000..80b614ac2282 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts @@ -0,0 +1,280 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include +#include +#include + +#include "mt7986a.dtsi" + +/ { + compatible = "ruijie,rg-x60-pro", "mediatek,mt7986a"; + model = "Ruijie RG-X60 Pro"; + + aliases { + serial0 = &uart0; + led-boot = &led_system; + led-failsafe = &led_alarm; + led-running = &led_system; + led-upgrade = &led_alarm; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x11002000"; + }; + + memory@40000000 { + reg = <0 0x40000000 0 0x20000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + label = "reset"; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-1 { + label = "mesh"; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds-gpio { + compatible = "gpio-leds"; + + led_system: led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 22 GPIO_ACTIVE_LOW>; + }; + + led_alarm: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy7>; + phy-mode = "2500base-x"; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + }; + + phy7: phy@7 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <7>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; + realtek,aldps-enable; + }; +}; + +&pio { + spi_flash_pins: spi-flash-pins-33-to-38 { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; + + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <20000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "product_info"; + reg = <0x580000 0x80000>; + read-only; + }; + + partition@600000 { + label = "kdump"; + reg = <0x600000 0x80000>; + read-only; + }; + + partition@680000 { + label = "ubi"; + reg = <0x680000 0x3f00000>; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&wifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wf_2g_5g_pins>; + + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index fcaeb698d773..f41af46cf353 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -27,6 +27,7 @@ mediatek_setup_interfaces() jdcloud,re-cp-03|\ mediatek,mt7981-rfb|\ netcore,n60|\ + ruijie,rg-x60-pro|\ unielec,u7981-01*|\ zbtlink,zbt-z8102ax) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1 @@ -160,6 +161,11 @@ mediatek_setup_macs() wan_mac=$(macaddr_add "$lan_mac" 1) label_mac=$wan_mac ;; + ruijie,rg-x60-pro) + label_mac=$(mtd_get_mac_ascii product_info ethaddr) + wan_mac=$label_mac + lan_mac=$(macaddr_add "$label_mac" 1) + ;; smartrg,sdg-8612|\ smartrg,sdg-8614|\ smartrg,sdg-8622|\ diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 90142b7fef25..dfb392e47359 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -127,6 +127,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress ;; + ruijie,rg-x60-pro) + addr=$(mtd_get_mac_ascii product_info ethaddr) + [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress + ;; smartrg,sdg-8612|\ smartrg,sdg-8614|\ smartrg,sdg-8622|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index fed550551f9d..a1aed507fd0e 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1051,6 +1051,16 @@ define Device/routerich_ax3000 endef TARGET_DEVICES += routerich_ax3000 +define Device/ruijie_rg-x60-pro + DEVICE_VENDOR := Ruijie + DEVICE_MODEL := RG-X60 Pro + DEVICE_DTS := mt7986a-ruijie-rg-x60-pro + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += ruijie_rg-x60-pro + define Device/tplink_tl-xdr-common DEVICE_VENDOR := TP-Link DEVICE_DTS_DIR := ../dts