From: Matthew Hagan Date: Sat, 29 Jan 2022 00:03:11 +0000 (+0900) Subject: ipq807x: add Edgecore EAP102 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3daeb3d6df9a8a1e68e58c2459b9feccfb6daf5d;p=project%2Ffirmware%2Fqca-wireless.git ipq807x: add Edgecore EAP102 The Edgecore EAP102 is a wall/ceiling mountable AP. The AP can be powered by either PoE or AC adapter. Device info: - IPQ8071-A SoC - 1GiB RAM - 256MiB NAND flash - 32MiB SPI NOR - 2 Ethernet ports - 1 Console port - 2GHz/5GHz AX WLAN - 2 USB 2.0 ports Install instructions: Prerequistes - TFTP server, preferrably within 192.168.1.0/24 Console cable plugged in (115200 8N1 no flow control) 1. Power on device and interrupt u-boot to obtain u-boot CLI 2. set serverip to IP address of the TFTP server: `setenv serverip 192.168.1.250` 3. Download image from TFTP server: `tftpboot 0x44000000 openwrt-ipq807x-generic-edgecore_eap102-squashfs-nand-factory.ubi` 4. Flash ubi image to both partitions and reset: `sf probe imxtract 0x44000000 ubi nand device 0 nand erase 0x0 0x3400000 nand erase 0x3c00000 0x3400000 nand write $fileaddr 0x0 $filesize nand write $fileaddr 0x3c00000 $filesize reset` Signed-off-by: Matthew Hagan --- diff --git a/board-edgecore_eap102.ipq8074 b/board-edgecore_eap102.ipq8074 new file mode 100644 index 0000000..36d0f42 Binary files /dev/null and b/board-edgecore_eap102.ipq8074 differ