From: Florian Fainelli Date: Mon, 2 Apr 2007 17:14:23 +0000 (+0000) Subject: Entry point is now configurable via a Makefile variable. Entry point is detected... X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3d987ecbdb68b0b0ee47fbb970f747010f863f67;p=openwrt%2Fstaging%2Frobimarko.git Entry point is now configurable via a Makefile variable. Entry point is detected automatically (Gabor Juhos) SVN-Revision: 6841 --- diff --git a/target/linux/adm5120-2.6/image/lzma-loader/Makefile b/target/linux/adm5120-2.6/image/lzma-loader/Makefile index e2afb186e0..8ce2688234 100644 --- a/target/linux/adm5120-2.6/image/lzma-loader/Makefile +++ b/target/linux/adm5120-2.6/image/lzma-loader/Makefile @@ -1,4 +1,4 @@ -# +# # Copyright (C) 2006 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. @@ -8,6 +8,9 @@ include $(TOPDIR)/rules.mk +LOADER := loader +BZ_STARTUP_ORG := 0 + PKG_NAME := lzma-loader PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) @@ -16,18 +19,19 @@ $(PKG_BUILD_DIR)/.prepared: $(CP) ./src/* $(PKG_BUILD_DIR)/ touch $@ -$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared +$(PKG_BUILD_DIR)/$(LOADER).gz: $(PKG_BUILD_DIR)/.prepared $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \ - LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)" + LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)" \ + LOADER=$(LOADER) BZ_STARTUP_ORG=$(BZ_STARTUP_ORG) -download: +download: prepare: $(PKG_BUILD_DIR)/.prepared -compile: $(PKG_BUILD_DIR)/loader.gz +compile: $(PKG_BUILD_DIR)/$(LOADER).gz install: ifneq ($(TARGET),) install: compile - $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/ + $(CP) $(PKG_BUILD_DIR)/$(LOADER).gz $(PKG_BUILD_DIR)/$(LOADER).elf $(TARGET)/ endif clean: diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/Makefile b/target/linux/adm5120-2.6/image/lzma-loader/src/Makefile index 85a864674b..e94be307da 100644 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/Makefile +++ b/target/linux/adm5120-2.6/image/lzma-loader/src/Makefile @@ -3,7 +3,7 @@ # # Copyright 2001-2003, Broadcom Corporation # All Rights Reserved. -# +# # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS @@ -16,9 +16,15 @@ # Copyright 2005 Oleg I. Vdovikin # Cleaned up, modified for lzma support, removed from kernel # +# Copyright 2007 Gabor Juhos +# Modified to support user defined entry point address. +# Added support for make targets with different names +# -TEXT_START := 0x80001000 +LOADADDR := 0x80001000 BZ_TEXT_START := 0x80300000 +BZ_STARTUP_ORG := 0 +LOADER := loader OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S @@ -26,52 +32,41 @@ CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ -ffunction-sections -pipe -mlong-calls -fno-common \ -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB +CFLAGS += -DLOADADDR=$(LOADADDR) -D_LZMA_IN_CB -ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START) +ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_STARTUP_ORG=$(BZ_STARTUP_ORG) -SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/ +LDFLAGS = -static --gc-sections -no-warn-mismatch +LDFLAGS += -e startup -Ttext $(BZ_TEXT_START) -T loader.lds.in -OBJECTS := head.o data.o +OBJECTS := $(LOADER)-head.o decompress.o LzmaDecode.o -all: loader.gz loader.elf +all: $(LOADER).gz $(LOADER).elf # Don't build dependencies, this may die if $(CC) isn't gcc dep: install: -loader.gz: loader - gzip -nc9 $< > $@ - -loader.elf: loader.o - cp $< $@ - -loader: loader.o - $(OBJCOPY) $< $@ - -loader.o: loader.lds $(OBJECTS) - $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS) - -loader.lds: loader.lds.in Makefile - @sed "$(SEDFLAGS)" < $< > $@ +decompress.o: + $(CC) $(CFLAGS) -c decompress.c -o $@ -data.o: data.lds decompress.image - $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips +$(LOADER)-head.o: + $(CC) $(ASFLAGS) -c head.S -o $@ -data.lds: - @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@ +$(LOADER).gz: $(LOADER).bin + gzip -nc9 $< > $@ -decompress.image: decompress - $(OBJCOPY) $< $@ +$(LOADER).elf: $(LOADER).o + cp $< $@ -decompress: decompress.lds decompress.o LzmaDecode.o - $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o +$(LOADER).bin: $(LOADER).o + $(OBJCOPY) -O binary $< $@ -decompress.lds: decompress.lds.in Makefile - @sed "$(SEDFLAGS)" < $< > $@ +$(LOADER).o: $(OBJECTS) + $(LD) $(LDFLAGS) -o $@ $(OBJECTS) mrproper: clean clean: - rm -f loader.gz loader decompress *.lds *.o *.image + rm -f *.gz *.elf *.bin *.o diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c b/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c index d3610241f6..ec63ccb651 100644 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c +++ b/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c @@ -109,10 +109,10 @@ static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) val = *(unsigned int *)data; data += 4; } - + *bufferSize = 1; *buffer = ((unsigned char *)&val) + (offset++ & 3); - + return LZMA_RESULT_OK; } @@ -120,14 +120,16 @@ static __inline__ unsigned char get_byte(void) { unsigned char *buffer; UInt32 fake; - + return read_byte(0, &buffer, &fake), *buffer; } +int uart_write_str(char * str); + /* should be the first function */ -void entry(unsigned long reg_a0, unsigned long reg_a1, +void decompress_entry(unsigned long reg_a0, unsigned long reg_a1, unsigned long reg_a2, unsigned long reg_a3, - unsigned long icache_size, unsigned long icache_lsize, + unsigned long icache_size, unsigned long icache_lsize, unsigned long dcache_size, unsigned long dcache_lsize) { unsigned int i; /* temp value */ @@ -140,13 +142,13 @@ void entry(unsigned long reg_a0, unsigned long reg_a1, callback.Read = read_byte; uart_write_str("decompress kernel ... "); - + /* look for trx header, 32-bit data access */ for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH)); ((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536); /* compressed kernel is in the partition 0 or 1 */ - if (((struct trx_header *)data)->offsets[1] > 65536) + if (((struct trx_header *)data)->offsets[1] > 65536) data += ((struct trx_header *)data)->offsets[0]; else data += ((struct trx_header *)data)->offsets[1]; @@ -169,7 +171,7 @@ void entry(unsigned long reg_a0, unsigned long reg_a1, ((unsigned int)get_byte() << 24); /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) + for (i = 0; i < 4; i++) get_byte(); /* decompress kernel */ @@ -188,11 +190,11 @@ void entry(unsigned long reg_a0, unsigned long reg_a1, } /* ********************************************************************* - * + * * ADM5120 UART driver File: dev_adm_uart.c - * + * * This is a console device driver for an ADM5120 UART - * + * ********************************************************************* * * Copyright 2006 @@ -226,7 +228,7 @@ int uart_write_hex(int val) { int i; int tmp; - + uart_write_str("0x"); for ( i=0 ; i<8 ; i++ ) { tmp = (val >> ((7-i) * 4 )) & 0xf; diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.lds.in b/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.lds.in index 33f56f8a09..e69de29bb2 100644 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.lds.in +++ b/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.lds.in @@ -1,20 +0,0 @@ -OUTPUT_ARCH(mips) -ENTRY(entry) -SECTIONS { - . = BZ_TEXT_START; - .text : { - *(.text.entry) - *(.text) - *(.rodata) - } - - .data : { - *(.data) - } - - .bss : { - *(.bss) - } - - workspace = .; -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/head.S b/target/linux/adm5120-2.6/image/lzma-loader/src/head.S index 7f0e9adc0d..3bfab9ff1b 100644 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/head.S +++ b/target/linux/adm5120-2.6/image/lzma-loader/src/head.S @@ -1,6 +1,6 @@ -/* Copyright 2007 Gabor Juhos */ +/* Copyright 2007 Gabor Juhos */ /* keep original values of the a0,a1,a2,a3 registers */ -/* cache manipulation adapted from Broadcom code */ +/* modifed to support user defined entry point address */ /* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */ /* cache manipulation adapted from Broadcom code */ /* idea taken from original bunzip2 decompressor code */ @@ -39,21 +39,44 @@ #define Index_Writeback_Inv_D 0x01 .text - LEAF(startup) + +#if (BZ_STARTUP_ORG) + .set noreorder + + b startup + nop + + .org BZ_STARTUP_ORG +#endif + +LEAF(startup) .set noreorder - - /* Copy decompressor code to the right place */ - li t0, BZ_TEXT_START - - la t1, code_start - la t2, code_stop -$L1: - lw t3, 0(t1) - sw t3, 0(t0) + + move t1, ra # save return address + la t0, __reloc_label # get linked address of label + bal __reloc_label # branch and link to label to + nop # get actual address +__reloc_label: + subu t0, ra, t0 # get reloc_delta + move ra, t1 # restore return address + + beqz t0, __reloc_end # if delta is 0 we are in the right place + nop + + /* Copy our code to the right place */ + la t1, _code_start # get linked address of _code_start + la t2, _code_end # get linked address of _code_end + addu t0, t0, t1 # calculate actual address of _code_start + +__reloc_copy: + lw t3, 0(t0) + sw t3, 0(t1) add t1, 4 - blt t1, t2, $L1 + blt t1, t2, __reloc_copy add t0, 4 +__reloc_end: + /* At this point we need to invalidate dcache and */ /* icache before jumping to new code */ @@ -100,10 +123,10 @@ $L1: .set mips0 bne t0,t1,1b addu t0,s1 - + nodc: /* Now we get to do it all again for the I$ */ - + move s3,zero /* just in case there is no icache */ move s4,zero @@ -147,20 +170,25 @@ nodc: addu t0,s3 noic: - li t0, BZ_TEXT_START - + /* Setup new "C" stack */ + la sp, _stack + addiu sp, -32 /* reserve stack for parameters */ -#if 0 +#if 0 sw a0, 0(sp) sw a1, 4(sp) sw a2, 8(sp) sw a3, 12(sp) -#endif +#endif sw s3, 16(sp) /* icache line size */ sw s4, 20(sp) /* icache size */ sw s1, 24(sp) /* dcache line size */ - jr t0 sw s2, 28(sp) /* dcache size */ - + + /* jump to the decompressor routine */ + la t0, decompress_entry + jr t0 + nop + .set reorder - END(startup) +END(startup) diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds.in b/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds.in index 20f2ea98ec..8c1bb9bd6a 100644 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds.in +++ b/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds.in @@ -1,17 +1,27 @@ OUTPUT_ARCH(mips) -ENTRY(startup) SECTIONS { - . = TEXT_START; .text : { + _code_start = .; *(.text) + *(.text.*) *(.rodata) + *(.rodata.*) + _code_end = .; } .data : { *(.data) + *(.data.*) } .bss : { *(.bss) + *(.bss.*) } + + . = ALIGN(16); + . = . + 8192; + _stack = .; + + workspace = .; }