From: John Crispin Date: Wed, 2 Jul 2014 07:42:44 +0000 (+0000) Subject: ralink: add Wansview NCS601W IP Camera X-Git-Tag: reboot~6700 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3d81a4ef822d9261d89338b6090558b0a370c853;p=openwrt%2Fopenwrt.git ralink: add Wansview NCS601W IP Camera Signed-off-by: John Crispin SVN-Revision: 41453 --- diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index d8bb095e45..b56fb63423 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -91,6 +91,7 @@ case "$FIRMWARE" in mpr-a1 | \ mpr-a2 | \ pwh2004 | \ + ncs601w | \ nbg-419n | \ nw718 | \ omni-emb | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 7612857844..4eef735d93 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -43,6 +43,7 @@ ramips_setup_interfaces() all5003 | \ broadway | \ dcs-930| \ + ncs601w | \ wnce2001) ucidef_add_switch "switch0" "1" "0" ucidef_set_interface_lan "eth0" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 697599341b..ca339b354c 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -301,6 +301,9 @@ ramips_board_detect() { *"WRTNODE") name="wrtnode" ;; + *"Wansview NCS601W") + name="ncs601w" + ;; *"Sercomm NA930") name="na930" ;; diff --git a/target/linux/ramips/dts/NCS601W.dts b/target/linux/ramips/dts/NCS601W.dts new file mode 100644 index 0000000000..dcf0e727a9 --- /dev/null +++ b/target/linux/ramips/dts/NCS601W.dts @@ -0,0 +1,110 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "NCS601W", "ralink,rt5350-soc"; + model = "Wansview NCS601W"; + + palmbus@10000000 { + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25fl064k"; + reg = <0 0>; + linux,modalias = "m25p80", "s25fl064k"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + ralink,portmap = <0x2f>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + +/* gpio-leds { + compatible = "gpio-leds"; + system { + label = "mpr-a1:blue:system"; + gpios = <&gpio0 20 1>; + }; + power { + label = "mpr-a1:red:power"; + gpios = <&gpio0 17 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio0 7 0>; + }; + root_hub { + gpio-export,name = "root_hub"; + gpio-export,output = <1>; + gpios = <&gpio0 12 0>; + }; + }; */ +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index ec3ef75de3..5b23035b4e 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -449,6 +449,8 @@ Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,N Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000) +Image/Build/Profile/NCS601W=$(call BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W) + nw718_mtd_size=3801088 Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory) @@ -596,6 +598,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/MPRA2,$(1)) $(call Image/Build/Profile/MZKW300NH2,$(1)) $(call Image/Build/Profile/NBG-419N,$(1)) + $(call Image/Build/Profile/NCS601W,$(1)) $(call Image/Build/Profile/NW718,$(1)) $(call Image/Build/Profile/OMNI-EMB,$(1)) $(call Image/Build/Profile/PSR-680W,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/wansview.mk b/target/linux/ramips/rt305x/profiles/wansview.mk new file mode 100644 index 0000000000..064cc0613d --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/wansview.mk @@ -0,0 +1,18 @@ +# +# Copyright (C) 2014 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/NCS601W + NAME:=Wansview NCS601W + PACKAGES:=kmod-video-core kmod-video-uvc \ + kmod-usb-core kmod-usb-ohci +endef + +define Profile/NCS601W/Description + Package set for Wansview NCS601W board +endef + +$(eval $(call Profile,NCS601W))