From: Sebastian Schaper Date: Mon, 20 May 2024 21:43:09 +0000 (+0200) Subject: ramips: add support for 7Links WLR-1230 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3d6cbe287afb445f06059d78b8467228ec1e57de;p=openwrt%2Fstaging%2Fansuel.git ramips: add support for 7Links WLR-1230 The WLR-1230 (ZX-5207) is an AC1200 Wave 2 outdoor repeater with sector antennas for wall or pole mounting. The device is manufactured by Todaair and meant to be used with a tuya-based app, there is no webinterface for configuration. Specifications: - MT7628AN, 8 MiB SPI NOR flash, 64 MiB RAM, 2x2 802.11n - MT7613 2x2 802.11ac Wave 2 - 802.3af PoE or 12V 1A 5.5x2.1 power supply (included) - 3 LEDs WLAN, LAN, RES; PWR LED is not software-controllable TFTP installation: - rename sysupgrade to `firmware_auto.bin` - provide at 192.168.1.10 during boot HTTP installation: - keep reset button pressed for 5 seconds during power on (LEDs flash slowly, then quickly to confirm, then remain steady on) - recovery web interface is at 192.168.1.1, upload sysupgrade Opening the device - two screws are located in the bottom left and right corners underneath the label, inner tray slides out easily initramfs boot - open device, connect serial console (pins are labelled) - keep pressing `4` during second tftp attempt to enter uboot shell - run `tftpboot 82000000` to avoid memory overlap, then `bootm` Signed-off-by: Sebastian Schaper --- diff --git a/target/linux/ramips/dts/mt7628an_7links_wlr-1230.dts b/target/linux/ramips/dts/mt7628an_7links_wlr-1230.dts new file mode 100644 index 0000000000..098658bbe3 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_7links_wlr-1230.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7628an_7links_wlr-12xx.dtsi" + +/ { + compatible = "7links,wlr-1230", "mediatek,mt7628an-soc"; + model = "7Links WLR-1230"; + + leds { + compatible = "gpio-leds"; + + led_res: res { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan { + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + lan { + function = LED_FUNCTION_LAN; + color = ; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + }; + + aliases { + led-boot = &led_res; + led-failsafe = &led_res; + led-running = &led_res; + led-upgrade = &led_res; + label-mac-device = ðernet; + }; +}; diff --git a/target/linux/ramips/dts/mt7628an_7links_wlr-12xx.dtsi b/target/linux/ramips/dts/mt7628an_7links_wlr-12xx.dtsi new file mode 100644 index 0000000000..1fe2cfe6f0 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_7links_wlr-12xx.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7628an.dtsi" +#include +#include +#include + +/ { + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x400>; + }; + + macaddr_factory_4: macaddr@4 { + reg = <0x4 0x6>; + }; + + eeprom_factory_8000: eeprom@8000 { + reg = <0x8000 0x4da8>; + }; + }; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + compatible = "denx,uimage"; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "gpio", "refclk", "wdt", "wled_an"; + function = "gpio"; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5000000 6000000>; + nvmem-cells = <&eeprom_factory_8000>; + nvmem-cell-names = "eeprom"; + }; +}; + +ðernet { + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; +}; + +&esw { + mediatek,portdisable = <0x2f>; +}; + +&wmac { + status = "okay"; + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; +}; + +&usbphy { + status = "disabled"; +}; + +&ehci { + status = "disabled"; +}; + +&ohci { + status = "disabled"; +}; + diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index b33a789398..aa547e81a7 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -29,6 +29,20 @@ define Build/ravpower-wd009-factory endef +define Device/7links_wlr-12xx + IMAGE_SIZE := 7872k + DEVICE_VENDOR := 7Links + DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | check-size | append-metadata +endef + +define Device/7links_wlr-1230 + $(Device/7links_wlr-12xx) + DEVICE_MODEL := WLR-1230 +endef +TARGET_DEVICES += 7links_wlr-1230 + define Device/alfa-network_awusfree1 IMAGE_SIZE := 7872k DEVICE_VENDOR := ALFA Network diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 324b57124f..3e0b70cc20 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -7,6 +7,9 @@ board=$(board_name) board_config_update case $board in +7links,wlr-1230) + ucidef_set_led_switch "lan" "lan" "orange:lan" "switch0" "0x10" + ;; alfa-network,awusfree1) ucidef_set_led_netdev "wifi_led" "wifi" "blue:wlan" "wlan0" ;; diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 96381b88b0..3eca7e61e8 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -8,6 +8,7 @@ ramips_setup_interfaces() local board="$1" case $board in + 7links,wlr-1230|\ alfa-network,awusfree1|\ d-team,pbr-d1|\ dlink,dap-1325-a1|\