From: Rob Herring Date: Fri, 13 Jul 2012 09:44:01 +0000 (+0000) Subject: ARM: Remove unused stack and irq config defines X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3d6ba91e793808d1612152e9f9b8c51b3ca6c926;p=project%2Fbcm63xx%2Fu-boot.git ARM: Remove unused stack and irq config defines CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present in most ARM board config files. IRQs are only enabled for 1 config, so remove the unused config options for IRQ and FIQ stack size as well. Cc: Albert ARIBAUD Signed-off-by: Rob Herring --- diff --git a/include/configs/SX1.h b/include/configs/SX1.h index ea09368993..93d031ca85 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -35,8 +35,6 @@ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000 /* the SX1 has 12MHz input clock */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -139,17 +137,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 6ad4a6befe..06adc947b0 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -49,8 +49,6 @@ /* input clock of PLL (VCMA9 has 12MHz input clock) */ #define CONFIG_SYS_CLK_FREQ 12000000 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -191,16 +189,6 @@ #define CONFIG_IDENT_STRING "\n(c) 2003 - 2011 by MPL AG Switzerland, " \ "MEV-10080-001 " VERSION_TAG -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h index a2b347a828..5a8d01009a 100644 --- a/include/configs/a320evb.h +++ b/include/configs/a320evb.h @@ -39,8 +39,6 @@ /* * CPU and Board Configuration Options */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #undef CONFIG_SKIP_LOWLEVEL_INIT /* @@ -104,17 +102,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - /* * Size of malloc() pool */ diff --git a/include/configs/actux1.h b/include/configs/actux1.h index bdd2239d8e..de29eb9ef2 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -105,12 +105,6 @@ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113842 diff --git a/include/configs/actux2.h b/include/configs/actux2.h index c55571c128..d2cc26c2a2 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -98,12 +98,6 @@ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113042 diff --git a/include/configs/actux3.h b/include/configs/actux3.h index 78ee2b598f..7165db09b0 100644 --- a/include/configs/actux3.h +++ b/include/configs/actux3.h @@ -96,13 +96,6 @@ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113442 diff --git a/include/configs/actux4.h b/include/configs/actux4.h index c1105df595..c34dca2c2d 100644 --- a/include/configs/actux4.h +++ b/include/configs/actux4.h @@ -103,12 +103,6 @@ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113003 diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h index 6bf0addcb5..b6e3844699 100644 --- a/include/configs/adp-ag101.h +++ b/include/configs/adp-ag101.h @@ -144,13 +144,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* * Size of malloc() pool */ diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index 747d061001..ef55e35564 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -144,13 +144,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* * Size of malloc() pool */ diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h index 35f88cc39d..eea44db356 100644 --- a/include/configs/adp-ag102.h +++ b/include/configs/adp-ag102.h @@ -218,13 +218,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* * Size of malloc() pool */ diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 6715cb4b11..041ca219da 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -170,9 +170,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif #endif diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index a8a6b8ed9c..a3752bca67 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -233,9 +233,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif -/* Unsupported features */ -#undef CONFIG_USE_IRQ - #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 54ab3ebd3f..f24b44d5e8 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -47,7 +47,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -255,13 +254,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index ed0a601df2..95f8d78854 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -47,7 +47,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -252,13 +251,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index aebca71ec3..b8ca8a849f 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -66,7 +66,6 @@ /* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ #define CONFIG_SYS_CLK_FREQ V_SCLK -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -206,13 +205,6 @@ #define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 2abcaffeef..bf20065afd 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -224,7 +224,4 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE SZ_32K /* regular stack */ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* Unsure if to big or to small*/ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* Unsure if to big or to small*/ #endif /* __AT91RM9200EK_CONFIG_H__ */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index ef25fa5e0c..f921fac64d 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -55,7 +55,6 @@ /* Misc CPU related */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -237,10 +236,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 014437b5e0..19acf64fa2 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -41,7 +41,6 @@ #include #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -239,10 +238,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 4309f71f16..73af3aff8a 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -47,7 +47,6 @@ #define CONFIG_AT91SAM9263EK 1 /* It's an AT91SAM9263EK Board */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 @@ -353,8 +352,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#undef CONFIG_USE_IRQ - #endif diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 1d5fc8f73e..6191cdf0fb 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -40,7 +40,6 @@ #define CONFIG_AT91SAM9M10G45EK #define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -179,10 +178,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index c5952e9319..8178b32a84 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -41,7 +41,6 @@ #define CONFIG_ARCH_CPU_INIT #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 @@ -189,8 +188,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#undef CONFIG_USE_IRQ - #endif diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index 97fdc2c9c6..756f40956b 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -101,15 +101,6 @@ #define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /* * DRAM Map */ diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h index 14b81460b7..312fd947be 100644 --- a/include/configs/ca9x4_ct_vxp.h +++ b/include/configs/ca9x4_ct_vxp.h @@ -105,13 +105,6 @@ #define LINUX_BOOT_PARAM_ADDR 0x60000200 #define CONFIG_BOOTDELAY 2 -/* Stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 0x60000000 /* SDRAM Bank #1 */ diff --git a/include/configs/calimain.h b/include/configs/calimain.h index 8141fd796f..5c2b35d584 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -161,7 +161,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (16 << 20)) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ /* * Serial Driver info diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 771ac9c3b1..91ab812840 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -146,7 +146,6 @@ #define CONFIG_MX_CYCLIC /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "cam_enc_4xx> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -191,7 +190,6 @@ #define CONFIG_TIMESTAMP /* U-Boot memory configuration */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* test 16MB RAM */ diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index 408e91832b..d2fd72a4a5 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -31,8 +31,6 @@ #define CONFIG_KS8695 1 /* it is a KS8695 CPU */ #define CONFIG_CM4008 1 /* it is an OpenGear CM4008 boad */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 @@ -95,17 +93,6 @@ #define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */ -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h index d85a6001a2..0e7a217433 100644 --- a/include/configs/cm41xx.h +++ b/include/configs/cm41xx.h @@ -31,8 +31,6 @@ #define CONFIG_KS8695 1 /* it is a KS8695 CPU */ #define CONFIG_CM41xx 1 /* it is an OpenGear CM41xx boad */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 @@ -95,17 +93,6 @@ #define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */ -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 6eeb2d3b7d..46c556ddc8 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -57,7 +57,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 @@ -278,13 +277,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 1f02f3feef..ae84344e47 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -116,17 +116,6 @@ #define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - /* * DRAM Map */ diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index a877066c4b..d65415a62c 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -51,7 +51,6 @@ #define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_BOARD_EARLY_INIT_F @@ -511,10 +510,4 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32 * 1024) - -#if defined(CONFIG_USE_IRQ) -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index dc676dffdb..15d56c346d 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -46,7 +46,6 @@ #define CONFIG_ARM920T #define CONFIG_AT91RM9200 #define CONFIG_CPUAT91 -#undef CONFIG_USE_IRQ #define USE_920T_MMU #include /* needed for port definitions */ @@ -211,15 +210,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32 * 1024) -#define CONFIG_STACKSIZE_IRQ (4 * 1024) -#define CONFIG_STACKSIZE_FIQ (4 * 1024) - - -#if defined(CONFIG_USE_IRQ) -#error CONFIG_USE_IRQ not supported -#endif - #define CONFIG_DEVICE_NULLDEV #define CONFIG_SILENT_CONSOLE diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 51dc6643d9..f7ac256a0f 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -53,7 +53,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ (32 << 20)) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ /* * Serial Driver info @@ -157,7 +156,6 @@ /* * U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #undef CONFIG_MISC_INIT_R #undef CONFIG_BOOTDELAY #define CONFIG_BOOTFILE "uImage" /* Boot file name */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 7af81e8b45..09a9660929 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -74,7 +74,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index a30d24c29b..de795a2ae2 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -131,7 +131,6 @@ #define CONFIG_MX_CYCLIC /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "DM355 EVM # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -170,7 +169,6 @@ #define CONFIG_NET_RETRY_COUNT 10 /* U-Boot memory configuration */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 1cd3d2eae7..88e6673837 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -99,7 +99,6 @@ #define CONFIG_MX_CYCLIC /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "DM355 LEOPARD # " #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -130,7 +129,6 @@ #define CONFIG_NET_RETRY_COUNT 10 /* U-Boot memory configuration */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index bcf10ca55e..6a331aa9f5 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -165,7 +165,6 @@ #define CONFIG_MX_CYCLIC /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "DM36x EVM # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -202,7 +201,6 @@ #define CONFIG_TIMESTAMP /* U-Boot memory configuration */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 6734ea3190..366c77f010 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -54,7 +54,6 @@ extern unsigned int davinci_arm_clk_get(void); #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE (256 << 20) /* DDR size 256MB */ @@ -108,7 +107,6 @@ extern unsigned int davinci_arm_clk_get(void); #endif /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "DM6467 EVM > " /* Monitor Command Prompt */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index e4443ec89e..ab9cedd077 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -74,7 +74,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ @@ -157,7 +156,6 @@ /*==============================*/ /* U-Boot general configuration */ /*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R #undef CONFIG_BOOTDELAY #define CONFIG_BOOTFILE "uImage" /* Boot file name */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 93df4ffe3c..8eb7af921c 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ #define DDR_4BANKS /* 4-bank DDR2 (128MB) */ @@ -101,7 +100,6 @@ /*==============================*/ /* U-Boot general configuration */ /*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R #undef CONFIG_BOOTDELAY #define CONFIG_BOOTFILE "uImage" /* Boot file name */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 23b0ba7003..958b19ad30 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ #define DDR_4BANKS /* 4-bank DDR2 (128MB) */ @@ -88,7 +87,6 @@ #define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ #define CONFIG_SYS_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */ /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R #define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds. */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 36a8c0668a..3d8d392e87 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ #define DDR_4BANKS /* 4-bank DDR2 (128MB) */ @@ -147,7 +146,6 @@ /*==============================*/ /* U-Boot general configuration */ /*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R #undef CONFIG_BOOTDELAY #define CONFIG_BOOTFILE "uImage" /* Boot file name */ diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 9f15ffb0fd..18d7374ba9 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -41,7 +41,6 @@ * Memory configurations */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_STACKSIZE SZ_32K #define CONFIG_SYS_MALLOC_LEN SZ_1M #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 1f44a42810..de75dafc97 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -59,7 +59,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -276,9 +275,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 diff --git a/include/configs/dig297.h b/include/configs/dig297.h index f123675aad..dda758269a 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -64,7 +64,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -259,17 +258,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h index 4eda91e7f4..a2af1e37fe 100644 --- a/include/configs/dvlhost.h +++ b/include/configs/dvlhost.h @@ -104,13 +104,6 @@ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113442 diff --git a/include/configs/ea20.h b/include/configs/ea20.h index a9caa814d5..337d504923 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -65,7 +65,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ /* * Serial Driver info diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 4d8be2b01e..d4104de5f2 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -61,8 +61,6 @@ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - /* * ARM asynchronous clock */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 6a67aa572c..f0fb48828a 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -228,7 +228,6 @@ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_STACKSIZE 0x00100000 #define CONFIG_SYS_LOAD_ADDR 0x00800000 #define CONFIG_SYS_MEMTEST_START 0x00400000 #define CONFIG_SYS_MEMTEST_END 0x007fffff diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index 143b0f01f4..439b5f3fe2 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -245,13 +245,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index b99492c05b..e2e0d5c2d0 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -71,7 +71,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ /* * Serial Driver info diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index f89e9ead92..14a0f02c5e 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -48,13 +48,12 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ #define CONFIG_SYS_HZ 1000 -#undef CONFIG_USE_IRQ /* Running w/o interrupts */ /* 32kB internal SRAM */ #define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */ #define CONFIG_SRAM_SIZE (32 << 10) -#define CONFIG_STACKSIZE (CONFIG_SRAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_STACKSIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) /* 128MB SDRAM in 1 bank */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 46939d4356..4350518939 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -146,14 +146,6 @@ #define CONFIG_SYS_HZ 1000 - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* * Physical Memory Map */ diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index 4f2600e8f6..73ab4c8375 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -87,7 +87,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ /* * Serial Driver info diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 897bc3937c..62cc08cebd 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -94,17 +94,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x800000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index af793e199b..5468a1a210 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -230,13 +230,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* * Physical Memory Map * diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h index 17fa4a13d3..567061aee3 100644 --- a/include/configs/ima3-mx53.h +++ b/include/configs/ima3-mx53.h @@ -133,9 +133,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE_ADDR diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 7d2876b9c5..b3f382c59b 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -94,7 +94,6 @@ #define CONFIG_SYS_MEMTEST_START 0xA0000000 #define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */ #define PHYS_SDRAM_1 0xA0000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index a340e97f00..8cca478578 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -138,13 +138,6 @@ #define CONFIG_CMDLINE_EDITING 1 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index a412cf61ee..b21621ca9e 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -142,13 +142,6 @@ #define CONFIG_CMDLINE_EDITING -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* * Physical Memory Map */ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 2252d93833..2770c82b59 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -101,17 +101,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index ca2d92d79f..d5043df6f0 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -112,17 +112,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index 2badadbc3b..7b9d36d5df 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -32,7 +32,6 @@ #define CONFIG_SYS_TEXT_BASE 0x10000000 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET @@ -204,8 +203,6 @@ #define CONFIG_SYS_MALLOC_LEN (10 << 20) #define CONFIG_SYS_MEM_TOP_HIDE (4 << 20) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - /* * Clock reset generator init */ @@ -292,8 +289,4 @@ #define CONFIG_SYS_DDR2_INIT_DRIC1_10 0x0005 #define CONFIG_SYS_DDR2_INIT_DRIC2_10 0x0002 -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/jornada.h b/include/configs/jornada.h index 84ad2d874c..d499abe4af 100644 --- a/include/configs/jornada.h +++ b/include/configs/jornada.h @@ -33,7 +33,6 @@ /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_DCACHE_OFF -#undef CONFIG_USE_IRQ /* Console setting */ @@ -88,12 +87,6 @@ #define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 } -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_32BIT diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 0d5ecd5588..27b77d3dab 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -158,7 +158,6 @@ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ #define CONFIG_NR_DRAM_BANKS 4 -#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ /* diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 4b9b290826..0a1d1e09a6 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -44,7 +44,6 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_DOS_PARTITION #define CONFIG_SYS_TEXT_BASE 0x0 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_DCACHE_OFF @@ -135,17 +134,6 @@ #define CONFIG_SYS_MMC_BASE 0xF0000000 #endif -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /* * Physical Memory Map */ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index f5cbbf345c..c52755e3ca 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -85,7 +85,6 @@ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ -#define CONFIG_STACKSIZE (128 * 1024) /* 128 KB stack */ #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */ #define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index c14cb851c5..733022e785 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -312,13 +312,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* * Physical Memory Map */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 1e897e23e0..31f2a8cf13 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -68,7 +68,6 @@ #define CONFIG_REVISION_TAG #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_MISC_INIT_R /* Call misc_init_r */ -#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ #define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ @@ -221,10 +220,4 @@ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -# error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 27b489902b..7086d1d0e8 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -105,7 +105,6 @@ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ -#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 665e33d868..3ede042ade 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -35,7 +35,6 @@ #define CONFIG_ARM920T 1 /* This is an ARM920T Core */ #define CONFIG_IMX 1 /* It's a Motorola MC9328 SoC */ #define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* * Select serial console configuration @@ -132,17 +131,6 @@ #define CONFIG_SYS_HZ 3686400 #define CONFIG_SYS_CPUSPEED 0x141 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index efca287539..359a308305 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -49,9 +49,6 @@ #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2) #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Serial Info */ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 4d06cf654c..fca58939f2 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -74,7 +74,6 @@ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */ -#define CONFIG_STACKSIZE (128 * 1024) /* 128 KB stack */ #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ #define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ #define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index cc720e8083..081fbf6905 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -154,13 +154,6 @@ #define CONFIG_CMDLINE_EDITING 1 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 7634de72cb..17d3143eba 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -150,13 +150,6 @@ #define CONFIG_CMDLINE_EDITING -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 6eb5da5d84..9bc6bd4470 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -160,14 +160,6 @@ #define CONFIG_SYS_HZ 1000 - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* * Physical Memory Map */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 29ba24e0d5..ba4a4a623c 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -217,13 +217,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index b486253533..6ab4cde489 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -153,9 +153,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CSD0_BASE_ADDR diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index d6aa46d7b9..0a7983306d 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -164,9 +164,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE_ADDR diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 24ec140149..8cbaf08e0e 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -175,9 +175,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CSD0_BASE_ADDR diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 1982184c86..f54d328be0 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -152,9 +152,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CSD0_BASE_ADDR diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index a9c1b1545e..6c1789527c 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -140,7 +140,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 0d376ba5cf..4a6aafa546 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -194,7 +194,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 37a66aba13..d438efdae6 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -85,12 +85,6 @@ #define CONFIG_SYS_TEXT_BASE 0x00000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + (1<<20)) -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - #define CONFIG_SYS_MEMTEST_START 0x00000000 #define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h index f465a5606b..3f49c6f0b1 100644 --- a/include/configs/ns9750dev.h +++ b/include/configs/ns9750dev.h @@ -42,7 +42,6 @@ #define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4) #define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8) -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /*@TODO #define CONFIG_STATUS_LED*/ #define CONFIG_USE_IRQ @@ -126,10 +125,7 @@ /*----------------------------------------------------------------------- * Stack sizes - * - * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index f591a86ab5..7a7fa227c0 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -38,8 +38,6 @@ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000 /* the OMAP1510 Innovator has 12MHz input clock */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -136,17 +134,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 13762ccaf1..1abf2590ef 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -61,7 +61,6 @@ /* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ #define CONFIG_SYS_CLK_FREQ V_SCLK -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -192,17 +191,6 @@ #define CONFIG_SYS_PTV V_PTV /* 2^(PTV+1) */ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index e974824191..782a4c5988 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -51,7 +51,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 @@ -344,13 +343,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index b12ce2e4d9..d9578f47b0 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -29,8 +29,6 @@ #define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ #define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */ -#undef CONFIG_USE_IRQ /* no support for IRQs */ - /* * Clock related definitions */ @@ -52,12 +50,6 @@ /* Size of malloc pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -/* - * Stack sizes - * These values are used in start.S - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* * Physical Memory Map * Note 1: CS1 may or may not be populated diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 6d4faed085..b975a6c9a4 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -35,8 +35,6 @@ #define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */ #define CONFIG_OMAP_GPIO -#undef CONFIG_USE_IRQ /* no support for IRQs */ - #define CONFIG_SYS_TEXT_BASE 0x80400000 #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -286,13 +284,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* * Physical Memory Map */ diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 30ca312931..67af314652 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -56,7 +56,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 @@ -247,13 +246,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 92bd8fcafc..dd4b2c0e88 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -42,7 +42,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -231,13 +230,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 28f8a3ee42..8a8a5d1cc0 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -46,7 +46,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -217,13 +216,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 1d8b0abf3d..2a890c9c7e 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -61,7 +61,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -293,13 +292,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ - #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 0f72ebe8eb..891e6f4363 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -51,7 +51,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -248,13 +247,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 98b93f8c76..4447dff00d 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -53,7 +53,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -218,13 +217,6 @@ #define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */ #define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV)) -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using these settings - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index 2771839967..ee0c4b9d9b 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -49,7 +49,6 @@ #define V_OSCK 38400000 /* Clock output from T2 */ #define V_SCLK V_OSCK -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 @@ -206,17 +205,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ -#endif - /* * SDRAM Memory Map * Even though we use two CS all the memory diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 639d4a377e..40ca9bb98d 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -42,8 +42,6 @@ /* the OMAP5912 OSK has 12MHz input clock */ #define CONFIG_SYS_CLK_FREQ 12000000 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 /* Required for ramdisk support */ @@ -138,17 +136,6 @@ #define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index 4d6de16734..4f0a6c1358 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -52,7 +52,6 @@ #define V_OSCK 19200000 /* Clock output from T2 */ #define V_SCLK V_OSCK -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT @@ -209,17 +208,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ -#endif - /* * SDRAM Memory Map * Even though we use two CS all the memory diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index f1cadb25fa..f24b765ee8 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -47,8 +47,6 @@ #define CONFIG_SYS_CLK_FREQ 13000000 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 @@ -147,18 +145,6 @@ #define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ - -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/origen.h b/include/configs/origen.h index 172bf1472b..1ab983493e 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -116,9 +116,6 @@ #define CONFIG_SYS_HZ 1000 -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ - /* ORIGEN has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ @@ -136,11 +133,6 @@ #undef CONFIG_CMD_IMLS #define CONFIG_IDENT_STRING " for ORIGEN" -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - #define CONFIG_CLK_1000_400_200 /* MIU (Memory Interleaving Unit) */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index 7abc42a4f5..fe4f3c0fa3 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -67,7 +67,6 @@ #define CONFIG_REVISION_TAG #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_MISC_INIT_R /* Call misc_init_r */ -#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ #define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ @@ -274,10 +273,4 @@ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -# error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 70b794db0f..835121ed3b 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -129,15 +129,6 @@ #define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /* * DRAM Map */ diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 7cf2c63bd8..bc88354c4a 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -130,15 +130,6 @@ #define CONFIG_SYS_HZ 3686400 /* Timer @ 3686400 Hz */ #define CONFIG_SYS_CPUSPEED 0x161 /* 400MHz;L=1 M=3 T=1 */ -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /* * DRAM Map */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 19b80d18e2..1e073177ed 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -118,17 +118,6 @@ #define CONFIG_IXP425_TIMER_CLK 66666666 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*************************************************************** * Platform/Board specific defines start here. ***************************************************************/ diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index cdb3593c4f..ecc72b72d4 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" #define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_SYS_TEXT_BASE 0 #define MACH_TYPE_PM9261 1187 @@ -380,10 +379,4 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index d202d0ad26..b60a9ade15 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263" #define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_SYS_TEXT_BASE 0 #define MACH_TYPE_PM9263 1475 @@ -412,10 +411,4 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index c766330bb2..460933f79d 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -188,10 +188,4 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index f143ed003c..ce9e7d115d 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -66,8 +66,6 @@ #define CONFIG_DOS_PARTITION 1 #define CONFIG_BOARD_LATE_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_DCACHE_OFF @@ -251,17 +249,6 @@ #define CONFIG_SYS_MMC_BASE 0xF0000000 #endif -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /* * Physical Memory Map */ diff --git a/include/configs/qong.h b/include/configs/qong.h index e824e17edd..485e1b1f04 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -212,12 +212,6 @@ #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_MISC_INIT_R -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 16be76457c..36f1a5700f 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -189,9 +189,6 @@ #define CONFIG_SYS_HZ 1000 -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ - /* Goni has 3 banks of DRAM, but swap the bank */ #define CONFIG_NR_DRAM_BANKS 3 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 721301f954..7727624c67 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -214,9 +214,6 @@ #define CONFIG_SYS_HZ 1000 -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */ - /* Universal has 2 banks of DRAM */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index 316e3fb925..4a1d25276e 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -182,10 +181,5 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif #endif diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index 1494a2ecc4..2336a8d4ec 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -27,7 +27,6 @@ #define CONFIG_ARM920T 1 /* this is an ARM920T CPU */ #define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */ #define CONFIG_SCB9328 1 /* on a scb9328tronix board */ -#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ #define CONFIG_IMX_SERIAL #define CONFIG_IMX_SERIAL1 @@ -100,13 +99,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) -#define CONFIG_STACKSIZE (120<<10) /* stack size */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ -#endif - /* SDRAM Setup Values 0x910a8300 Precharge Command CAS 3 0x910a8200 Precharge Command CAS 2 diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 8792c857c8..1c0978da8a 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -45,8 +45,6 @@ /* input clock of PLL (the SMDK2410 has 12MHz input clock) */ #define CONFIG_SYS_CLK_FREQ 12000000 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -148,17 +146,6 @@ #define CONFIG_LZO #define CONFIG_LZMA -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index eb1466c52b..e0a6deb0ee 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -133,9 +133,6 @@ #define CONFIG_RD_LVL -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ - #define CONFIG_NR_DRAM_BANKS 8 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index 04caeef968..d4dc8ef82d 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -141,13 +141,6 @@ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE 0x40000 /* regular stack 256KB */ - /********************************** Support Clock Settings ********************************** diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index fd9f96d462..22de3448e3 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -182,13 +182,6 @@ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ - /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 41d7780a0e..602337f4da 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -115,9 +115,6 @@ #define CONFIG_SYS_HZ 1000 -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ - /* SMDKV310 has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ @@ -135,11 +132,6 @@ #undef CONFIG_CMD_IMLS #define CONFIG_IDENT_STRING " for SMDKC210/V310" -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - #define CONFIG_CLK_1000_400_200 /* MIU (Memory Interleaving Unit) */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 8af3c02f34..218ca546bb 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -40,7 +40,6 @@ /* CPU */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -162,7 +161,6 @@ /* U-Boot memory settings */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) -#define CONFIG_STACKSIZE (256 << 10) /* Command line configuration */ #include diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index a6d1cfbcb0..192cda1438 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -233,14 +233,6 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO -/* Stack sizes */ -#define CONFIG_STACKSIZE (128*1024) - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) -#define CONFIG_STACKSIZE_FIQ (4*1024) -#endif - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x00000000 diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 24f6f7e952..375265d475 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -48,7 +48,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -183,12 +182,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* * Physical Memory Map */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 1c0d2350f4..4c02f20543 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -163,13 +163,7 @@ #define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ #define CONFIG_STACKBASE 0x2800000 /* 40MB */ -#define CONFIG_STACKSIZE 0x20000 /* 128K regular stack*/ /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index 2272ad27c2..23cab88ded 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -55,7 +55,6 @@ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_STACKSIZE (256*1024) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index def5306012..bc04a00945 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -59,7 +59,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -166,10 +165,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/top9000.h b/include/configs/top9000.h index 1a5f680682..7cc65773b4 100644 --- a/include/configs/top9000.h +++ b/include/configs/top9000.h @@ -71,7 +71,6 @@ /* Misc CPU related */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -303,9 +302,5 @@ extern void read_factory_r(void); /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN \ ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif #endif diff --git a/include/configs/trats.h b/include/configs/trats.h index d2dfc9ff22..cadb1e9d52 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -165,9 +165,6 @@ #define CONFIG_SYS_HZ 1000 -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */ - /* TRATS has 2 banks of DRAM */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 56336ae199..63c98dc723 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -58,7 +58,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -245,9 +244,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index b4ec8f0c3c..151059a939 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -46,8 +46,6 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_TEXT_BASE 0x0 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_DCACHE_OFF @@ -177,17 +175,6 @@ #define CONFIG_SYS_MMC_BASE 0xF0000000 #endif -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /* * Physical Memory Map */ diff --git a/include/configs/tt01.h b/include/configs/tt01.h index 2b2e7fd8cd..cc68a42e86 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -86,9 +86,6 @@ /* default load address, 1MB up the road */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1+0x100000) -/* The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Size of malloc() pool, make sure possible frame buffer fits */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 10*1024*1024) diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 6821528971..c8a49bba14 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -84,7 +84,6 @@ /* 8MB DRAM test */ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1+0x0800000) -#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */ /* * Serial Info diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h index b26efec570..1bb612826e 100644 --- a/include/configs/u8500_href.h +++ b/include/configs/u8500_href.h @@ -178,16 +178,6 @@ #define CONFIG_SYS_I2C_GPIOE_ADDR 0x42 /* GPIO expander chip addr */ #define CONFIG_TC35892_GPIO -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif /* * Physical Memory Map diff --git a/include/configs/vct.h b/include/configs/vct.h index 0a5ce6459c..b4b0949522 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -47,7 +47,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_STACKSIZE (256 << 10) #define CONFIG_SYS_MALLOC_LEN (1 << 20) #define CONFIG_SYS_BOOTPARAMS_LEN (128 << 10) #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 diff --git a/include/configs/versatile.h b/include/configs/versatile.h index ff23a92d91..38f5302e71 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -144,17 +144,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/vision2.h b/include/configs/vision2.h index f3e8491fe6..fba897c1ea 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -176,11 +176,6 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* * Physical Memory Map */ diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index 24f89c98e4..e2cf4f005e 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -29,7 +29,6 @@ /*--------------------------------------------------------------------------*/ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_ARM926EJS /* This is an ARM926EJS Core */ #define CONFIG_AT91FAMILY #define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/ @@ -379,8 +378,6 @@ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - #ifndef CONFIG_RAMLOAD #define CONFIG_BOOTCOMMAND "run nfsboot" #endif @@ -454,10 +451,4 @@ "erase 10060000 1007FFFF;reset\0" \ " " -/*--------------------------------------------------------------------------*/ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index 01f0b6ce5e..424a902456 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -165,14 +165,6 @@ #define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */ -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif /* * DRAM Map diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 0ed3bf4a8a..e399e95019 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -44,12 +44,8 @@ #define CONFIG_XAENIAX 1 /* on a xaeniax board */ #define CONFIG_SYS_TEXT_BASE 0x0 - #define CONFIG_BOARD_LATE_INIT - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_DCACHE_OFF @@ -181,17 +177,6 @@ #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector */ #define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /* * SMSC91C111 Network Card */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index 8e6377019b..8b7e05b9e5 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_BOARD_LATE_INIT -#undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_PREBOOT @@ -153,15 +152,6 @@ unsigned char zipitz2_spi_read(void); #define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /* * SRAM Map */ diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index c9f737d429..072945ad4a 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -171,6 +171,5 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ #endif /* __CONFIG_H */