From: Florian Fainelli Date: Wed, 15 Feb 2012 21:13:11 +0000 (+0000) Subject: add Ralink V11ST-FE board support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3ceebbba14c46704f2b4f04a423d1ed2358319fb;p=openwrt%2Fstaging%2Frmilecki.git add Ralink V11ST-FE board support This board is equipped with: - 4MB of NOR Flash - 32MB of SDRAM - IC+ IP175C switch - one Mini-PCI slot SVN-Revision: 30561 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 262160490e9..b167c520bdc 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -69,6 +69,9 @@ get_status_led() { rt-n56u) status_led="asus:blue:power" ;; + v11st-fe) + status_led="v11st-fe:green:status" + ;; v22rw-2x2) status_led="v22rw-2x2:green:security" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 65b2cd39c8a..5e6fa420d77 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -58,6 +58,7 @@ case "$FIRMWARE" in nw718 | \ omni-emb | \ rt-n15 | \ + v11st-fe | \ v22rw-2x2 | \ w502u | \ wcr-150gn | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index bcd17f9d045..891a1a7b3c9 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -60,6 +60,9 @@ case $board in nw718) set_usb_led "nw718:amber:usb" ;; + v11st-fe) + set_wifi_led "rt2800pci-phy0::radio" + ;; w502u) set_usb_led "alfa:blue:usb" set_wifi_led "rt2800pci-phy0::radio" diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index 0f97bc3647e..a36341ca15b 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -50,6 +50,13 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "2" "4 8t" ;; + v11st-fe) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t" + ucidef_add_switch_vlan "switch0" "2" "0 5t" + ;; + wcr-150gn) ucidef_set_interface_lan_wan "eth0.2" "eth0.1" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 9c1a7dcb576..07bdf160511 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -122,6 +122,9 @@ ramips_board_name() { *"Sitecom WL-351 v1 002") name="wl-351" ;; + *"Ralink V11ST-FE") + name="v11st-fe" + ;; *"WLI-TX4-AG300N") name="wli-tx4-ag300n" ;; diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index fa6d9856650..d6c991133fd 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -16,6 +16,7 @@ enum ramips_mach_type { /* RT2880 based machines */ RAMIPS_MACH_F5D8235_V1, /* Belkin F5D8235 v1 */ RAMIPS_MACH_RT_N15, /* Asus RT-N15 */ + RAMIPS_MACH_V11ST_FE, /* Ralink V11ST-FE */ RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */ RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig index 4189d9eef0b..a2593e8850e 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig @@ -11,6 +11,11 @@ config RT288X_MACH_RT_N15 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT288X_MACH_V11ST_FE + bool "Ralink V11ST-FE board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT288X_MACH_WLI_TX4_AG300N bool "Buffalo WLI-TX4-AG300N board support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile index 5205706f3c1..473f8559982 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile @@ -15,5 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o +obj-$(CONFIG_RT288X_MACH_V11ST_FE) += mach-v11st-fe.o obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c new file mode 100644 index 00000000000..63146808644 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c @@ -0,0 +1,106 @@ +/* + * Ralink V11ST-FE board support + * + * Copyright (C) 2012 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +#define V11ST_FE_GPIO_STATUS_LED 12 +#define V11ST_FE_GPIO_BUTTON_WPS 0 + +#define V11ST_FE_KEYS_POLL_INTERVAL 20 +#define V11ST_FE_KEYS_DEBOUNCE_INTERVAL (3 * V11ST_FE_KEYS_POLL_INTERVAL) + +static struct gpio_led v11st_fe_leds_gpio[] __initdata = { + { + .name = "v11st-fe:green:status", + .gpio = V11ST_FE_GPIO_STATUS_LED, + .active_low = 1, + } +}; + +static struct gpio_keys_button v11st_fe_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = V11ST_FE_KEYS_DEBOUNCE_INTERVAL, + .gpio = V11ST_FE_GPIO_BUTTON_WPS, + } +}; + +static struct mtd_partition v11st_fe_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x140000, + }, { + .name = "rootfs", + .offset = 0x190000, + .size = 0x210000, + } +}; + +static void __init rt_v11st_fe_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + rt288x_flash0_data.nr_parts = ARRAY_SIZE(v11st_fe_partitions); + rt288x_flash0_data.parts = v11st_fe_partitions; + rt288x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(v11st_fe_leds_gpio), + v11st_fe_leds_gpio); + + ramips_register_gpio_buttons(-1, V11ST_FE_KEYS_POLL_INTERVAL, + ARRAY_SIZE(v11st_fe_gpio_buttons), + v11st_fe_gpio_buttons); + + rt288x_register_wifi(); + + /* Board is connected to an IC+ IP175C Fast Ethernet switch */ + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_eth_data.phy_mask = BIT(0); + rt288x_register_ethernet(); + + rt288x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_V11ST_FE, "V11ST-FE", "Ralink V11ST-FE", rt_v11st_fe_init); diff --git a/target/linux/ramips/rt288x/config-2.6.39 b/target/linux/ramips/rt288x/config-2.6.39 index aaed397469d..a84d5cac0bb 100644 --- a/target/linux/ramips/rt288x/config-2.6.39 +++ b/target/linux/ramips/rt288x/config-2.6.39 @@ -63,6 +63,7 @@ CONFIG_HW_HAS_PCI=y CONFIG_HW_RANDOM=m CONFIG_IMAGE_CMDLINE_HACK=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_IP17XX_PHY=y CONFIG_IRQ_CPU=y # CONFIG_LEDS_GPIO is not set CONFIG_MACH_NO_WESTBRIDGE=y @@ -96,6 +97,7 @@ CONFIG_RALINK_RT288X=y CONFIG_RAMIPS_WDT=y CONFIG_RT288X_MACH_F5D8235_V1=y CONFIG_RT288X_MACH_RT_N15=y +CONFIG_RT288X_MACH_V11ST_FE=y CONFIG_RT288X_MACH_WLI_TX4_AG300N=y CONFIG_RT288X_MACH_WZR_AGL300NH=y CONFIG_RTL8366S_PHY=y diff --git a/target/linux/ramips/rt288x/config-3.2 b/target/linux/ramips/rt288x/config-3.2 index 186950cab7c..1ae35b5bb96 100644 --- a/target/linux/ramips/rt288x/config-3.2 +++ b/target/linux/ramips/rt288x/config-3.2 @@ -61,6 +61,7 @@ CONFIG_HW_HAS_PCI=y CONFIG_HW_RANDOM=m CONFIG_IMAGE_CMDLINE_HACK=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_IP17XX_PHY=y CONFIG_IRQ_CPU=y CONFIG_IRQ_FORCED_THREADING=y # CONFIG_LANTIQ is not set @@ -96,6 +97,7 @@ CONFIG_RALINK_RT288X=y CONFIG_RAMIPS_WDT=y CONFIG_RT288X_MACH_F5D8235_V1=y CONFIG_RT288X_MACH_RT_N15=y +CONFIG_RT288X_MACH_V11ST_FE=y CONFIG_RT288X_MACH_WLI_TX4_AG300N=y CONFIG_RT288X_MACH_WZR_AGL300NH=y CONFIG_RTL8366S_PHY=y