From: Hauke Mehrtens Date: Sun, 9 Aug 2020 17:47:17 +0000 (+0200) Subject: pistachio: Make patches and configuration apply on to of 5.4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3cd9219e5e16aa38606ea82e4fadb1e0f5f39743;p=openwrt%2Fstaging%2Fnbd.git pistachio: Make patches and configuration apply on to of 5.4 This refreshes the patches, removes patches already applied upstream and removes the SPI NAND framework to use the upstream version. In addition it also refreshes the kernel configuration. Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/pistachio/Makefile b/target/linux/pistachio/Makefile index c13f63bd18..0bf04dcc56 100644 --- a/target/linux/pistachio/Makefile +++ b/target/linux/pistachio/Makefile @@ -14,6 +14,7 @@ CPU_TYPE:=24kc CPU_SUBTYPE:=24kf KERNEL_PATCHVER:=4.14 +KERNEL_TESTING_PATCHVER:=5.4 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/pistachio/config-5.4 b/target/linux/pistachio/config-5.4 index 8b24b68a05..c4637c1372 100644 --- a/target/linux/pistachio/config-5.4 +++ b/target/linux/pistachio/config-5.4 @@ -1,23 +1,21 @@ -CONFIG_ARCH_BINFMT_ELF_STATE=y +CONFIG_ARCH_32BIT_OFF_T=y CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y +CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y +CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set -# CONFIG_ARCH_HAS_SG_CHAIN is not set -# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set -# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set +CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y +CONFIG_ARCH_HAS_UNCACHED_SEGMENT=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y CONFIG_ARCH_MMAP_RND_BITS_MAX=15 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_SD=y @@ -31,12 +29,13 @@ CONFIG_CLKSRC_PISTACHIO=y CONFIG_CLONE_BACKWARDS=y CONFIG_COMMON_CLK=y # CONFIG_COMMON_CLK_BOSTON is not set +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CONNECTOR=y CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_LOAD_STORE_LR=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_CPU_HAS_RIXI=y CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y @@ -49,7 +48,6 @@ CONFIG_CPU_MIPSR2_IRQ_VI=y CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y CONFIG_CPU_PM=y CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y CONFIG_CPU_RMAP=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_HIGHMEM=y @@ -64,6 +62,8 @@ CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y @@ -74,34 +74,46 @@ CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_ZSTD=y CONFIG_CSRC_R4K=y CONFIG_DMADEVICES=y CONFIG_DMA_ENGINE=y CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y CONFIG_DMA_OF=y CONFIG_DMA_VIRTUAL_CHANNELS=y CONFIG_DTC=y -# CONFIG_DWMAC_DWC_QOS_ETH is not set CONFIG_DWMAC_GENERIC=y CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_8250=y +CONFIG_EFI_EARLYCON=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y CONFIG_FIXED_PHY=y +CONFIG_FONT_8x16=y +CONFIG_FONT_AUTOSELECT=y +CONFIG_FONT_SUPPORT=y +CONFIG_FS_IOMAP=y CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y +CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_GENERIC_ATOMIC64=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_IO=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y CONFIG_GENERIC_IRQ_IPI=y CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_LIB_ASHLDI3=y +CONFIG_GENERIC_LIB_ASHRDI3=y +CONFIG_GENERIC_LIB_CMPDI2=y +CONFIG_GENERIC_LIB_LSHRDI3=y +CONFIG_GENERIC_LIB_UCMPDI2=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_PHY=y CONFIG_GENERIC_PINCONF=y @@ -112,21 +124,18 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GPIOLIB=y CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_GRO_CELLS is not set CONFIG_HANDLE_DOMAIN_IRQ=y CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -# CONFIG_HAVE_ARCH_BITREVERSE is not set +CONFIG_HAVE_ARCH_COMPILER_H=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_HAVE_CLK=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_HAVE_CONTEXT_TRACKING=y @@ -134,27 +143,30 @@ CONFIG_HAVE_COPY_THREAD_TLS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_HAVE_DEBUG_KMEMLEAK=y CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FAST_GUP=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_VDSO=y CONFIG_HAVE_IDE=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_KVM=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_HAVE_NET_DSA=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HOTPLUG_CPU=y +CONFIG_HZ=250 +CONFIG_HZ_250=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_IMG=y @@ -171,6 +183,7 @@ CONFIG_JBD2=y CONFIG_LEDS_PWM=y CONFIG_LIBFDT=y CONFIG_LKDTM=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y @@ -179,11 +192,14 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0 CONFIG_MDIO_BUS=y CONFIG_MDIO_DEVICE=y +CONFIG_MEMFD_CREATE=y CONFIG_MFD_SYSCON=y CONFIG_MICREL_PHY=y +CONFIG_MIGRATION=y CONFIG_MIPS=y CONFIG_MIPS_ASID_BITS=8 CONFIG_MIPS_ASID_SHIFT=0 +CONFIG_MIPS_CBPF_JIT=y CONFIG_MIPS_CLOCK_VSYSCALL=y CONFIG_MIPS_CM=y # CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set @@ -192,37 +208,34 @@ CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y CONFIG_MIPS_CPC=y CONFIG_MIPS_CPS=y # CONFIG_MIPS_CPS_CPUIDLE is not set -# CONFIG_MIPS_CPS_NS16550 is not set +# CONFIG_MIPS_CPS_NS16550_BOOL is not set CONFIG_MIPS_CPS_PM=y CONFIG_MIPS_CPU_SCACHE=y # CONFIG_MIPS_ELF_APPENDED_DTB is not set CONFIG_MIPS_EXTERNAL_TIMER=y CONFIG_MIPS_GIC=y -# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set CONFIG_MIPS_MT=y CONFIG_MIPS_MT_FPAFF=y CONFIG_MIPS_MT_SMP=y CONFIG_MIPS_NO_APPENDED_DTB=y +CONFIG_MIPS_NR_CPU_NR_MAP=4 CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y # CONFIG_MIPS_RAW_APPENDED_DTB is not set CONFIG_MIPS_SPRAM=y -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_MMC=y CONFIG_MMC_BLOCK=y CONFIG_MMC_DW=y +# CONFIG_MMC_DW_BLUEFIELD is not set # CONFIG_MMC_DW_EXYNOS is not set +# CONFIG_MMC_DW_HI3798CV200 is not set # CONFIG_MMC_DW_K3 is not set CONFIG_MMC_DW_PLTFM=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_CORE=y CONFIG_MTD_SPI_NAND=y -CONFIG_MTD_SPI_NAND_DEVICES=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384 @@ -242,7 +255,6 @@ CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y CONFIG_NO_HZ=y CONFIG_NO_HZ_COMMON=y CONFIG_NO_HZ_IDLE=y -# CONFIG_NO_IOPORT_MAP is not set CONFIG_NR_CPUS=4 CONFIG_OF=y CONFIG_OF_ADDRESS=y @@ -250,14 +262,17 @@ CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_FLATTREE=y CONFIG_OF_GPIO=y CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y CONFIG_OF_MDIO=y CONFIG_OF_NET=y CONFIG_PADATA=y +CONFIG_PAGE_POOL=y CONFIG_PCI_DRIVERS_LEGACY=y CONFIG_PERF_USE_VMALLOC=y CONFIG_PGTABLE_LEVELS=2 # CONFIG_PGTABLE_MAPPING is not set CONFIG_PHYLIB=y +CONFIG_PHYLINK=y CONFIG_PHY_PISTACHIO_USB=y CONFIG_PINCTRL=y CONFIG_PINCTRL_PISTACHIO=y @@ -279,9 +294,7 @@ CONFIG_RATIONAL=y CONFIG_RCU_NEED_SEGCBLIST=y CONFIG_RCU_STALL_COMMON=y CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y @@ -294,18 +307,22 @@ CONFIG_SCHED_INFO=y CONFIG_SCSI=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SERIAL_8250_DW=y -# CONFIG_SERIAL_8250_FSL is not set +CONFIG_SERIAL_8250_DWLIB=y +CONFIG_SERIAL_MCTRL_GPIO=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SGL_ALLOC=y CONFIG_SG_POOL=y CONFIG_SMP=y CONFIG_SMP_UP=y CONFIG_SPI=y CONFIG_SPI_IMG_SPFI=y CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y CONFIG_SRAM=y CONFIG_SRCU=y CONFIG_STMMAC_ETH=y CONFIG_STMMAC_PLATFORM=y +# CONFIG_STMMAC_SELFTESTS is not set CONFIG_SWPHY=y CONFIG_SYNC_R4K=y CONFIG_SYSCTL_EXCEPTION_TRACE=y @@ -321,6 +338,7 @@ CONFIG_SYS_SUPPORTS_RELOCATABLE=y CONFIG_SYS_SUPPORTS_SCHED_SMT=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_TARGET_ISA_REV=2 CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TIMER_OF=y CONFIG_TIMER_PROBE=y @@ -331,12 +349,12 @@ CONFIG_UBIFS_FS=y # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UBIFS_FS_ZSTD=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_COMMON=y CONFIG_USB_DWC2=y CONFIG_USB_DWC2_DUAL_ROLE=y -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_HCD_PLATFORM is not set CONFIG_USB_GADGET=y @@ -348,7 +366,10 @@ CONFIG_USE_OF=y CONFIG_WATCHDOG_CORE=y CONFIG_WEAK_ORDERING=y CONFIG_XPS=y +CONFIG_XXHASH=y CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y CONFIG_ZSMALLOC=y # CONFIG_ZSMALLOC_STAT is not set +CONFIG_ZSTD_COMPRESS=y +CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/pistachio/patches-5.4/101-dmaengine-img-mdc-Handle-early-status-read.patch b/target/linux/pistachio/patches-5.4/101-dmaengine-img-mdc-Handle-early-status-read.patch index 92293f8796..031a4e3e5e 100644 --- a/target/linux/pistachio/patches-5.4/101-dmaengine-img-mdc-Handle-early-status-read.patch +++ b/target/linux/pistachio/patches-5.4/101-dmaengine-img-mdc-Handle-early-status-read.patch @@ -16,7 +16,7 @@ Signed-off-by: Damien Horsley --- a/drivers/dma/img-mdc-dma.c +++ b/drivers/dma/img-mdc-dma.c -@@ -620,25 +620,33 @@ static enum dma_status mdc_tx_status(str +@@ -618,25 +618,33 @@ static enum dma_status mdc_tx_status(str (MDC_CMDS_PROCESSED_CMDS_DONE_MASK + 1); /* diff --git a/target/linux/pistachio/patches-5.4/102-spi-img-spfi-Implement-dual-and-quad-mode.patch b/target/linux/pistachio/patches-5.4/102-spi-img-spfi-Implement-dual-and-quad-mode.patch index 15a5d3c806..9966ae71a9 100644 --- a/target/linux/pistachio/patches-5.4/102-spi-img-spfi-Implement-dual-and-quad-mode.patch +++ b/target/linux/pistachio/patches-5.4/102-spi-img-spfi-Implement-dual-and-quad-mode.patch @@ -28,7 +28,7 @@ Signed-off-by: Ezequiel Garcia --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c -@@ -40,7 +40,8 @@ +@@ -37,7 +37,8 @@ #define SPFI_CONTROL_SOFT_RESET BIT(11) #define SPFI_CONTROL_SEND_DMA BIT(10) #define SPFI_CONTROL_GET_DMA BIT(9) @@ -38,7 +38,7 @@ Signed-off-by: Ezequiel Garcia #define SPFI_CONTROL_TMODE_SHIFT 5 #define SPFI_CONTROL_TMODE_MASK 0x7 #define SPFI_CONTROL_TMODE_SINGLE 0 -@@ -51,6 +52,10 @@ +@@ -48,6 +49,10 @@ #define SPFI_TRANSACTION 0x18 #define SPFI_TRANSACTION_TSIZE_SHIFT 16 #define SPFI_TRANSACTION_TSIZE_MASK 0xffff @@ -49,7 +49,7 @@ Signed-off-by: Ezequiel Garcia #define SPFI_PORT_STATE 0x1c #define SPFI_PORT_STATE_DEV_SEL_SHIFT 20 -@@ -87,6 +92,7 @@ +@@ -84,6 +89,7 @@ */ #define SPFI_32BIT_FIFO_SIZE 64 #define SPFI_8BIT_FIFO_SIZE 16 @@ -57,7 +57,7 @@ Signed-off-by: Ezequiel Garcia struct img_spfi { struct device *dev; -@@ -103,6 +109,8 @@ struct img_spfi { +@@ -100,6 +106,8 @@ struct img_spfi { struct dma_chan *tx_ch; bool tx_dma_busy; bool rx_dma_busy; @@ -66,7 +66,7 @@ Signed-off-by: Ezequiel Garcia }; struct img_spfi_device_data { -@@ -123,9 +131,11 @@ static inline void spfi_start(struct img +@@ -120,9 +128,11 @@ static inline void spfi_start(struct img { u32 val; @@ -81,7 +81,7 @@ Signed-off-by: Ezequiel Garcia } static inline void spfi_reset(struct img_spfi *spfi) -@@ -138,12 +148,21 @@ static int spfi_wait_all_done(struct img +@@ -135,12 +145,21 @@ static int spfi_wait_all_done(struct img { unsigned long timeout = jiffies + msecs_to_jiffies(50); diff --git a/target/linux/pistachio/patches-5.4/103-spi-img-spfi-set-device-select-bits-for-SPFI-port-st.patch b/target/linux/pistachio/patches-5.4/103-spi-img-spfi-set-device-select-bits-for-SPFI-port-st.patch deleted file mode 100644 index ba70348da9..0000000000 --- a/target/linux/pistachio/patches-5.4/103-spi-img-spfi-set-device-select-bits-for-SPFI-port-st.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 145f5369510b86cd55c659388a26a0cc267f8874 Mon Sep 17 00:00:00 2001 -From: Ionela Voinescu -Date: Mon, 1 Feb 2016 10:58:08 +0000 -Subject: spi: img-spfi: set device select bits for SPFI port state - -Even if the chip select line is not controlled by the SPFI -hardware, the device select bits need to be set to specify -the chip select line in use for the hardware to know what -parameters to use for the current transfer. - -Signed-off-by: Ionela Voinescu ---- - drivers/spi/spi-img-spfi.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/spi/spi-img-spfi.c -+++ b/drivers/spi/spi-img-spfi.c -@@ -438,6 +438,9 @@ static int img_spfi_prepare(struct spi_m - u32 val; - - val = spfi_readl(spfi, SPFI_PORT_STATE); -+ val &= ~(SPFI_PORT_STATE_DEV_SEL_MASK << -+ SPFI_PORT_STATE_DEV_SEL_SHIFT); -+ val |= msg->spi->chip_select << SPFI_PORT_STATE_DEV_SEL_SHIFT; - if (msg->spi->mode & SPI_CPHA) - val |= SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select); - else diff --git a/target/linux/pistachio/patches-5.4/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch b/target/linux/pistachio/patches-5.4/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch index 6c9e6b5a76..9050dae187 100644 --- a/target/linux/pistachio/patches-5.4/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch +++ b/target/linux/pistachio/patches-5.4/104-spi-img-spfi-use-device-0-configuration-for-all-devi.patch @@ -15,7 +15,7 @@ Signed-off-by: Ionela Voinescu --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c -@@ -437,18 +437,23 @@ static int img_spfi_prepare(struct spi_m +@@ -434,18 +434,23 @@ static int img_spfi_prepare(struct spi_m struct img_spfi *spfi = spi_master_get_devdata(master); u32 val; @@ -44,7 +44,7 @@ Signed-off-by: Ionela Voinescu spfi_writel(spfi, val, SPFI_PORT_STATE); return 0; -@@ -548,11 +553,15 @@ static void img_spfi_config(struct spi_m +@@ -545,11 +550,15 @@ static void img_spfi_config(struct spi_m div = DIV_ROUND_UP(clk_get_rate(spfi->spfi_clk), xfer->speed_hz); div = clamp(512 / (1 << get_count_order(div)), 1, 128); diff --git a/target/linux/pistachio/patches-5.4/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch b/target/linux/pistachio/patches-5.4/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch index 0067b0ea4a..182897cd5a 100644 --- a/target/linux/pistachio/patches-5.4/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch +++ b/target/linux/pistachio/patches-5.4/105-spi-img-spfi-RX-maximum-burst-size-for-DMA-is-8.patch @@ -29,7 +29,7 @@ Signed-off-by: Ionela Voinescu --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c -@@ -346,12 +346,11 @@ static int img_spfi_start_dma(struct spi +@@ -343,12 +343,11 @@ static int img_spfi_start_dma(struct spi if (xfer->len % 4 == 0) { rxconf.src_addr = spfi->phys + SPFI_RX_32BIT_VALID_DATA; rxconf.src_addr_width = 4; @@ -43,7 +43,7 @@ Signed-off-by: Ionela Voinescu dmaengine_slave_config(spfi->rx_ch, &rxconf); rxdesc = dmaengine_prep_slave_sg(spfi->rx_ch, xfer->rx_sg.sgl, -@@ -370,12 +369,11 @@ static int img_spfi_start_dma(struct spi +@@ -367,12 +366,11 @@ static int img_spfi_start_dma(struct spi if (xfer->len % 4 == 0) { txconf.dst_addr = spfi->phys + SPFI_TX_32BIT_VALID_DATA; txconf.dst_addr_width = 4; diff --git a/target/linux/pistachio/patches-5.4/106-spi-img-spfi-finish-every-transfer-cleanly.patch b/target/linux/pistachio/patches-5.4/106-spi-img-spfi-finish-every-transfer-cleanly.patch index 0f958314e3..cffb72ee33 100644 --- a/target/linux/pistachio/patches-5.4/106-spi-img-spfi-finish-every-transfer-cleanly.patch +++ b/target/linux/pistachio/patches-5.4/106-spi-img-spfi-finish-every-transfer-cleanly.patch @@ -24,7 +24,7 @@ Signed-off-by: Ionela Voinescu --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c -@@ -83,6 +83,14 @@ +@@ -80,6 +80,14 @@ #define SPFI_INTERRUPT_SDE BIT(1) #define SPFI_INTERRUPT_SDTRIG BIT(0) @@ -39,7 +39,7 @@ Signed-off-by: Ionela Voinescu /* * There are four parallel FIFOs of 16 bytes each. The word buffer * (*_32BIT_VALID_DATA) accesses all four FIFOs at once, resulting in an -@@ -144,6 +152,23 @@ static inline void spfi_reset(struct img +@@ -141,6 +149,23 @@ static inline void spfi_reset(struct img spfi_writel(spfi, 0, SPFI_CONTROL); } @@ -63,7 +63,7 @@ Signed-off-by: Ionela Voinescu static int spfi_wait_all_done(struct img_spfi *spfi) { unsigned long timeout = jiffies + msecs_to_jiffies(50); -@@ -152,19 +177,9 @@ static int spfi_wait_all_done(struct img +@@ -149,19 +174,9 @@ static int spfi_wait_all_done(struct img return 0; while (time_before(jiffies, timeout)) { @@ -85,7 +85,7 @@ Signed-off-by: Ionela Voinescu cpu_relax(); } -@@ -296,6 +311,8 @@ static int img_spfi_start_pio(struct spi +@@ -293,6 +308,8 @@ static int img_spfi_start_pio(struct spi } ret = spfi_wait_all_done(spfi); @@ -94,7 +94,7 @@ Signed-off-by: Ionela Voinescu if (ret < 0) return ret; -@@ -311,8 +328,10 @@ static void img_spfi_dma_rx_cb(void *dat +@@ -308,8 +325,10 @@ static void img_spfi_dma_rx_cb(void *dat spin_lock_irqsave(&spfi->lock, flags); spfi->rx_dma_busy = false; @@ -106,7 +106,7 @@ Signed-off-by: Ionela Voinescu spin_unlock_irqrestore(&spfi->lock, flags); } -@@ -325,8 +344,10 @@ static void img_spfi_dma_tx_cb(void *dat +@@ -322,8 +341,10 @@ static void img_spfi_dma_tx_cb(void *dat spin_lock_irqsave(&spfi->lock, flags); spfi->tx_dma_busy = false; diff --git a/target/linux/pistachio/patches-5.4/107-clockevents-Retry-programming-min-delta-up-to-10-tim.patch b/target/linux/pistachio/patches-5.4/107-clockevents-Retry-programming-min-delta-up-to-10-tim.patch deleted file mode 100644 index 857823b783..0000000000 --- a/target/linux/pistachio/patches-5.4/107-clockevents-Retry-programming-min-delta-up-to-10-tim.patch +++ /dev/null @@ -1,66 +0,0 @@ -From b46f8c74afdd30cd52bfdcc2231470a0bab04416 Mon Sep 17 00:00:00 2001 -From: James Hogan -Date: Fri, 22 Apr 2016 18:22:45 +0100 -Subject: clockevents: Retry programming min delta up to 10 times - -Under virtualisation it is possible to get unexpected latency during a -clockevent device's set_next_event() callback which can make it return --ETIME even for a delta based on min_delta_ns. - -The clockevents_program_min_delta() implementation for -CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=n doesn't handle retries when this -happens, nor does clockevents_program_event() or its callers when force -is true (for example hrtimer_reprogram()). This can result in hangs -until the clock event device does a full period. - -It isn't appropriate to use MIN_ADJUST in this case as occasional -hypervisor induced high latency will cause min_delta_ns to quickly -increase to the maximum. -Instead, borrow the retry pattern from the MIN_ADJUST case, but without -making adjustments. We retry up to 10 times before giving up. - -(picked https://patchwork.kernel.org/patch/8909491/) - -Signed-off-by: James Hogan ---- - kernel/time/clockevents.c | 26 +++++++++++++++++++------- - 1 file changed, 19 insertions(+), 7 deletions(-) - ---- a/kernel/time/clockevents.c -+++ b/kernel/time/clockevents.c -@@ -281,16 +281,28 @@ static int clockevents_program_min_delta - { - unsigned long long clc; - int64_t delta; -+ int i; - -- delta = dev->min_delta_ns; -- dev->next_event = ktime_add_ns(ktime_get(), delta); -+ for (i = 0;;) { -+ delta = dev->min_delta_ns; -+ dev->next_event = ktime_add_ns(ktime_get(), delta); - -- if (clockevent_state_shutdown(dev)) -- return 0; -+ if (clockevent_state_shutdown(dev)) -+ return 0; - -- dev->retries++; -- clc = ((unsigned long long) delta * dev->mult) >> dev->shift; -- return dev->set_next_event((unsigned long) clc, dev); -+ dev->retries++; -+ clc = ((unsigned long long) delta * dev->mult) >> dev->shift; -+ if (dev->set_next_event((unsigned long) clc, dev) == 0) -+ return 0; -+ -+ if (++i > 9) { -+ /* -+ * We tried 10 times to program the device with the -+ * given min_delta_ns. Get out of here. -+ */ -+ return -ETIME; -+ } -+ } - } - - #endif /* CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST */ diff --git a/target/linux/pistachio/patches-5.4/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch b/target/linux/pistachio/patches-5.4/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch index 5329ad62d0..6fddbe269a 100644 --- a/target/linux/pistachio/patches-5.4/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch +++ b/target/linux/pistachio/patches-5.4/108-clk-pistachio-Fix-wrong-SDHost-card-speed.patch @@ -20,7 +20,7 @@ Signed-off-by: Govindraj Raja --- a/drivers/clk/pistachio/clk-pistachio.c +++ b/drivers/clk/pistachio/clk-pistachio.c -@@ -44,7 +44,7 @@ static struct pistachio_gate pistachio_g +@@ -41,7 +41,7 @@ static struct pistachio_gate pistachio_g GATE(CLK_AUX_ADC_INTERNAL, "aux_adc_internal", "sys_internal_div", 0x104, 22), GATE(CLK_AUX_ADC, "aux_adc", "aux_adc_div", 0x104, 23), @@ -29,7 +29,7 @@ Signed-off-by: Govindraj Raja GATE(CLK_BT, "bt", "bt_div", 0x104, 25), GATE(CLK_BT_DIV4, "bt_div4", "bt_div4_div", 0x104, 26), GATE(CLK_BT_DIV8, "bt_div8", "bt_div8_div", 0x104, 27), -@@ -54,6 +54,7 @@ static struct pistachio_gate pistachio_g +@@ -51,6 +51,7 @@ static struct pistachio_gate pistachio_g static struct pistachio_fixed_factor pistachio_ffs[] __initdata = { FIXED_FACTOR(CLK_WIFI_DIV4, "wifi_div4", "wifi_pll", 4), FIXED_FACTOR(CLK_WIFI_DIV8, "wifi_div8", "wifi_pll", 8), @@ -39,7 +39,7 @@ Signed-off-by: Govindraj Raja static struct pistachio_div pistachio_divs[] __initdata = { --- a/include/dt-bindings/clock/pistachio-clk.h +++ b/include/dt-bindings/clock/pistachio-clk.h -@@ -21,6 +21,7 @@ +@@ -18,6 +18,7 @@ /* Fixed-factor clocks */ #define CLK_WIFI_DIV4 16 #define CLK_WIFI_DIV8 17 diff --git a/target/linux/pistachio/patches-5.4/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch b/target/linux/pistachio/patches-5.4/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch index 22fc42b988..cec424a0ce 100644 --- a/target/linux/pistachio/patches-5.4/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch +++ b/target/linux/pistachio/patches-5.4/109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch @@ -28,7 +28,7 @@ Signed-off-by: Ian Pozella --- a/arch/mips/boot/dts/img/pistachio_marduk.dts +++ b/arch/mips/boot/dts/img/pistachio_marduk.dts -@@ -120,7 +120,7 @@ +@@ -117,7 +117,7 @@ &sdhost { status = "okay"; @@ -37,7 +37,7 @@ Signed-off-by: Ian Pozella disable-wp; }; -@@ -130,6 +130,7 @@ +@@ -127,6 +127,7 @@ &pin_sdhost_data { drive-strength = <2>; diff --git a/target/linux/pistachio/patches-5.4/401-mtd-nor-support-mtd-name-from-device-tree.patch b/target/linux/pistachio/patches-5.4/401-mtd-nor-support-mtd-name-from-device-tree.patch index 065a0b77bc..5d2f9284ab 100644 --- a/target/linux/pistachio/patches-5.4/401-mtd-nor-support-mtd-name-from-device-tree.patch +++ b/target/linux/pistachio/patches-5.4/401-mtd-nor-support-mtd-name-from-device-tree.patch @@ -10,17 +10,17 @@ Signed-off-by: Abhimanyu Vishwakarma --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -2671,6 +2671,7 @@ int spi_nor_scan(struct spi_nor *nor, co - struct device *dev = nor->dev; +@@ -4931,6 +4931,7 @@ int spi_nor_scan(struct spi_nor *nor, co struct mtd_info *mtd = &nor->mtd; struct device_node *np = spi_nor_get_flash_node(nor); + struct spi_nor_flash_parameter *params = &nor->params; + const char __maybe_unused *of_mtd_name = NULL; int ret; int i; -@@ -2746,7 +2747,12 @@ int spi_nor_scan(struct spi_nor *nor, co - spi_nor_wait_till_ready(nor); - } +@@ -4993,7 +4994,12 @@ int spi_nor_scan(struct spi_nor *nor, co + /* Init flash parameters based on flash_info struct and SFDP */ + spi_nor_init_params(nor); - if (!mtd->name) +#ifdef CONFIG_MTD_OF_PARTS diff --git a/target/linux/pistachio/patches-5.4/411-mtd-nand-Check-length-of-ID-before-reading-bits-per-.patch b/target/linux/pistachio/patches-5.4/411-mtd-nand-Check-length-of-ID-before-reading-bits-per-.patch deleted file mode 100644 index 3311de645f..0000000000 --- a/target/linux/pistachio/patches-5.4/411-mtd-nand-Check-length-of-ID-before-reading-bits-per-.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 42ebff638003be18fab503b37de4ad7853244e95 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Sat, 25 Feb 2017 15:58:22 +0000 -Subject: mtd: nand: Check length of ID before reading bits per cell - -The table-based NAND identification currently reads the number -of bits per cell from the 3rd byte of the extended ID. This is done -for the so-called 'full ID' devices; i.e. devices that have a known -length ID. - -However, if the ID length is shorter than three, there's no 3rd byte, -and so it's wrong to read the bits per cell from there. Fix this by -adding a check for the ID length. - -(picked from http://lists.infradead.org/pipermail/linux-mtd/2014-December/056764.html) - -Signed-off-by: Ezequiel Garcia ---- - drivers/mtd/nand/nand_base.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -3803,7 +3803,8 @@ static bool find_full_id_nand(struct nan - mtd->erasesize = type->erasesize; - mtd->oobsize = type->oobsize; - -- chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]); -+ if (type->id_len > 2) -+ chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]); - chip->chipsize = (uint64_t)type->chipsize << 20; - chip->options |= type->options; - chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); diff --git a/target/linux/pistachio/patches-5.4/412-mtd-nand-Add-JEDEC-manufacturer-ID-for-Gigadevice.patch b/target/linux/pistachio/patches-5.4/412-mtd-nand-Add-JEDEC-manufacturer-ID-for-Gigadevice.patch deleted file mode 100644 index a967124c81..0000000000 --- a/target/linux/pistachio/patches-5.4/412-mtd-nand-Add-JEDEC-manufacturer-ID-for-Gigadevice.patch +++ /dev/null @@ -1,35 +0,0 @@ -From a4bc33b205fd9b1db862f1e45173dba57b0fa57f Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Sat, 25 Feb 2017 15:43:09 +0000 -Subject: mtd: nand: Add JEDEC manufacturer ID for Gigadevice - -This commit adds Gigadevice to the list of manufacturer ID and name strings. - -(picked from http://lists.infradead.org/pipermail/linux-mtd/2014-December/056765.html) - -Signed-off-by: Ezequiel Garcia ---- - drivers/mtd/nand/nand_ids.c | 1 + - include/linux/mtd/rawnand.h | 1 + - 2 files changed, 2 insertions(+) - ---- a/drivers/mtd/nand/nand_ids.c -+++ b/drivers/mtd/nand/nand_ids.c -@@ -184,6 +184,7 @@ static const struct nand_manufacturer na - {NAND_MFR_SANDISK, "SanDisk"}, - {NAND_MFR_INTEL, "Intel"}, - {NAND_MFR_ATO, "ATO"}, -+ {NAND_MFR_GIGADEVICE, "Gigadevice"}, - {NAND_MFR_WINBOND, "Winbond"}, - }; - ---- a/include/linux/mtd/rawnand.h -+++ b/include/linux/mtd/rawnand.h -@@ -1014,6 +1014,7 @@ static inline void *nand_get_manufacture - #define NAND_MFR_SANDISK 0x45 - #define NAND_MFR_INTEL 0x89 - #define NAND_MFR_ATO 0x9b -+#define NAND_MFR_GIGADEVICE 0xc8 - #define NAND_MFR_WINBOND 0xef - - diff --git a/target/linux/pistachio/patches-5.4/413-mtd-Introduce-SPI-NAND-framework.patch b/target/linux/pistachio/patches-5.4/413-mtd-Introduce-SPI-NAND-framework.patch deleted file mode 100644 index d1189eeb8c..0000000000 --- a/target/linux/pistachio/patches-5.4/413-mtd-Introduce-SPI-NAND-framework.patch +++ /dev/null @@ -1,707 +0,0 @@ -From 082a89a78e29b15008284df90441747cb742f149 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 2 Dec 2014 09:58:52 -0300 -Subject: mtd: Introduce SPI NAND framework - -Add a new framework, to support SPI NAND devices. The framework registers -a NAND chip and handles the generic SPI NAND protocol, calling device-specific -hooks for each SPI NAND command. - -The following is the stack design, from userspace to hardware. This commit -adds the "SPI NAND core" layer. - - Userspace - ------------------ - MTD - ------------------ - NAND core - ------------------ - SPI NAND core - ------------------ - SPI NAND device - ------------------ - SPI core - ------------------ - SPI master - ------------------ - Hardware - -(based on http://lists.infradead.org/pipermail/linux-mtd/2014-December/056763.html) - -Signed-off-by: Ionela Voinescu -Signed-off-by: Ezequiel Garcia -Signed-off-by: Ian Pozella ---- - drivers/mtd/Kconfig | 2 + - drivers/mtd/Makefile | 1 + - drivers/mtd/spi-nand/Kconfig | 7 + - drivers/mtd/spi-nand/Makefile | 1 + - drivers/mtd/spi-nand/spi-nand-base.c | 566 +++++++++++++++++++++++++++++++++++ - include/linux/mtd/spi-nand.h | 54 ++++ - 6 files changed, 631 insertions(+) - create mode 100644 drivers/mtd/spi-nand/Kconfig - create mode 100644 drivers/mtd/spi-nand/Makefile - create mode 100644 drivers/mtd/spi-nand/spi-nand-base.c - create mode 100644 include/linux/mtd/spi-nand.h - ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -373,6 +373,8 @@ source "drivers/mtd/onenand/Kconfig" - - source "drivers/mtd/lpddr/Kconfig" - -+source "drivers/mtd/spi-nand/Kconfig" -+ - source "drivers/mtd/spi-nor/Kconfig" - - source "drivers/mtd/ubi/Kconfig" ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -37,6 +37,7 @@ inftl-objs := inftlcore.o inftlmount.o - - obj-y += chips/ lpddr/ maps/ devices/ nand/ onenand/ tests/ - -+obj-$(CONFIG_MTD_SPI_NAND) += spi-nand/ - obj-$(CONFIG_MTD_SPI_NOR) += spi-nor/ - obj-$(CONFIG_MTD_UBI) += ubi/ - ---- /dev/null -+++ b/drivers/mtd/spi-nand/Kconfig -@@ -0,0 +1,7 @@ -+menuconfig MTD_SPI_NAND -+ tristate "SPI NAND device support" -+ depends on MTD -+ select MTD_NAND -+ help -+ This is the framework for the SPI NAND. -+ ---- /dev/null -+++ b/drivers/mtd/spi-nand/Makefile -@@ -0,0 +1 @@ -+obj-$(CONFIG_MTD_SPI_NAND) += spi-nand-base.o ---- /dev/null -+++ b/drivers/mtd/spi-nand/spi-nand-base.c -@@ -0,0 +1,566 @@ -+/* -+ * Copyright (C) 2014 Imagination Technologies Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; version 2 of the License. -+ * -+ * Notes: -+ * 1. Erase and program operations need to call write_enable() first, -+ * to clear the enable bit. This bit is cleared automatically after -+ * the erase or program operation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* Registers common to all devices */ -+#define SPI_NAND_LOCK_REG 0xa0 -+#define SPI_NAND_PROT_UNLOCK_ALL 0x0 -+ -+#define SPI_NAND_FEATURE_REG 0xb0 -+#define SPI_NAND_ECC_EN BIT(4) -+#define SPI_NAND_QUAD_EN BIT(0) -+ -+#define SPI_NAND_STATUS_REG 0xc0 -+#define SPI_NAND_STATUS_REG_ECC_MASK 0x3 -+#define SPI_NAND_STATUS_REG_ECC_SHIFT 4 -+#define SPI_NAND_STATUS_REG_PROG_FAIL BIT(3) -+#define SPI_NAND_STATUS_REG_ERASE_FAIL BIT(2) -+#define SPI_NAND_STATUS_REG_WREN BIT(1) -+#define SPI_NAND_STATUS_REG_BUSY BIT(0) -+ -+#define SPI_NAND_CMD_BUF_LEN 8 -+ -+/* Rewind and fill the buffer with 0xff */ -+static void spi_nand_clear_buffer(struct spi_nand *snand) -+{ -+ snand->buf_start = 0; -+ memset(snand->data_buf, 0xff, snand->buf_size); -+} -+ -+static int spi_nand_enable_ecc(struct spi_nand *snand) -+{ -+ int ret; -+ -+ ret = snand->read_reg(snand, SPI_NAND_FEATURE_REG, snand->buf); -+ if (ret) -+ return ret; -+ -+ snand->buf[0] |= SPI_NAND_ECC_EN; -+ ret = snand->write_reg(snand, SPI_NAND_FEATURE_REG, snand->buf); -+ if (ret) -+ return ret; -+ snand->ecc = true; -+ -+ return 0; -+} -+ -+static int spi_nand_disable_ecc(struct spi_nand *snand) -+{ -+ int ret; -+ -+ ret = snand->read_reg(snand, SPI_NAND_FEATURE_REG, snand->buf); -+ if (ret) -+ return ret; -+ -+ snand->buf[0] &= ~SPI_NAND_ECC_EN; -+ ret = snand->write_reg(snand, SPI_NAND_FEATURE_REG, snand->buf); -+ if (ret) -+ return ret; -+ snand->ecc = false; -+ -+ return 0; -+} -+ -+static int spi_nand_enable_quad(struct spi_nand *snand) -+{ -+ int ret; -+ -+ ret = snand->read_reg(snand, SPI_NAND_FEATURE_REG, snand->buf); -+ if (ret) -+ return ret; -+ -+ snand->buf[0] |= SPI_NAND_QUAD_EN; -+ ret = snand->write_reg(snand, SPI_NAND_FEATURE_REG, snand->buf); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+/* -+ * Wait until the status register busy bit is cleared. -+ * Returns a negatie errno on error or time out, and a non-negative status -+ * value if the device is ready. -+ */ -+static int spi_nand_wait_till_ready(struct spi_nand *snand) -+{ -+ unsigned long deadline = jiffies + msecs_to_jiffies(100); -+ bool timeout = false; -+ int ret; -+ -+ /* -+ * Perhaps we should set a different timeout for each -+ * operation (reset, read, write, erase). -+ */ -+ while (!timeout) { -+ if (time_after_eq(jiffies, deadline)) -+ timeout = true; -+ -+ ret = snand->read_reg(snand, SPI_NAND_STATUS_REG, snand->buf); -+ if (ret < 0) { -+ dev_err(snand->dev, "error reading status register\n"); -+ return ret; -+ } else if (!(snand->buf[0] & SPI_NAND_STATUS_REG_BUSY)) { -+ return snand->buf[0]; -+ } -+ -+ cond_resched(); -+ } -+ -+ dev_err(snand->dev, "operation timed out\n"); -+ -+ return -ETIMEDOUT; -+} -+ -+static int spi_nand_reset(struct spi_nand *snand) -+{ -+ int ret; -+ -+ ret = snand->reset(snand); -+ if (ret < 0) { -+ dev_err(snand->dev, "reset command failed\n"); -+ return ret; -+ } -+ -+ /* -+ * The NAND core won't wait after a device reset, so we need -+ * to do that here. -+ */ -+ ret = spi_nand_wait_till_ready(snand); -+ if (ret < 0) -+ return ret; -+ return 0; -+} -+ -+static int spi_nand_status(struct spi_nand *snand) -+{ -+ int ret, status; -+ -+ ret = snand->read_reg(snand, SPI_NAND_STATUS_REG, snand->buf); -+ if (ret < 0) { -+ dev_err(snand->dev, "error reading status register\n"); -+ return ret; -+ } -+ status = snand->buf[0]; -+ -+ /* Convert this into standard NAND_STATUS values */ -+ if (status & SPI_NAND_STATUS_REG_BUSY) -+ snand->buf[0] = 0; -+ else -+ snand->buf[0] = NAND_STATUS_READY; -+ -+ if (status & SPI_NAND_STATUS_REG_PROG_FAIL || -+ status & SPI_NAND_STATUS_REG_ERASE_FAIL) -+ snand->buf[0] |= NAND_STATUS_FAIL; -+ -+ /* -+ * Since we unlock the entire device at initialization, unconditionally -+ * set the WP bit to indicate it's not protected. -+ */ -+ snand->buf[0] |= NAND_STATUS_WP; -+ return 0; -+} -+ -+static int spi_nand_erase(struct spi_nand *snand, int page_addr) -+{ -+ int ret; -+ -+ ret = snand->write_enable(snand); -+ if (ret < 0) { -+ dev_err(snand->dev, "write enable command failed\n"); -+ return ret; -+ } -+ -+ ret = snand->block_erase(snand, page_addr); -+ if (ret < 0) { -+ dev_err(snand->dev, "block erase command failed\n"); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int spi_nand_write(struct spi_nand *snand) -+{ -+ int ret; -+ -+ /* Enable quad mode */ -+ ret = spi_nand_enable_quad(snand); -+ if (ret) { -+ dev_err(snand->dev, "error %d enabling quad mode\n", ret); -+ return ret; -+ } -+ /* Store the page to cache */ -+ ret = snand->store_cache(snand, 0, snand->buf_size, snand->data_buf); -+ if (ret < 0) { -+ dev_err(snand->dev, "error %d storing page 0x%x to cache\n", -+ ret, snand->page_addr); -+ return ret; -+ } -+ -+ ret = snand->write_enable(snand); -+ if (ret < 0) { -+ dev_err(snand->dev, "write enable command failed\n"); -+ return ret; -+ } -+ -+ /* Get page from the device cache into our internal buffer */ -+ ret = snand->write_page(snand, snand->page_addr); -+ if (ret < 0) { -+ dev_err(snand->dev, "error %d reading page 0x%x from cache\n", -+ ret, snand->page_addr); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int spi_nand_read_id(struct spi_nand *snand) -+{ -+ int ret; -+ -+ ret = snand->read_id(snand, snand->data_buf); -+ if (ret < 0) { -+ dev_err(snand->dev, "error %d reading ID\n", ret); -+ return ret; -+ } -+ return 0; -+} -+ -+static int spi_nand_read_page(struct spi_nand *snand, unsigned int page_addr, -+ unsigned int page_offset, size_t length) -+{ -+ unsigned int corrected = 0, ecc_error = 0; -+ int ret; -+ -+ /* Load a page into the cache register */ -+ ret = snand->load_page(snand, page_addr); -+ if (ret < 0) { -+ dev_err(snand->dev, "error %d loading page 0x%x to cache\n", -+ ret, page_addr); -+ return ret; -+ } -+ -+ ret = spi_nand_wait_till_ready(snand); -+ if (ret < 0) -+ return ret; -+ -+ if (snand->ecc) { -+ snand->get_ecc_status(ret, &corrected, &ecc_error); -+ snand->bitflips = corrected; -+ -+ /* -+ * If there's an ECC error, print a message and notify MTD -+ * about it. Then complete the read, to load actual data on -+ * the buffer (instead of the status result). -+ */ -+ if (ecc_error) { -+ dev_err(snand->dev, -+ "internal ECC error reading page 0x%x\n", -+ page_addr); -+ snand->nand_chip.mtd.ecc_stats.failed++; -+ } else { -+ snand->nand_chip.mtd.ecc_stats.corrected += corrected; -+ } -+ } -+ -+ /* Enable quad mode */ -+ ret = spi_nand_enable_quad(snand); -+ if (ret) { -+ dev_err(snand->dev, "error %d enabling quad mode\n", ret); -+ return ret; -+ } -+ /* Get page from the device cache into our internal buffer */ -+ ret = snand->read_cache(snand, page_offset, length, snand->data_buf); -+ if (ret < 0) { -+ dev_err(snand->dev, "error %d reading page 0x%x from cache\n", -+ ret, page_addr); -+ return ret; -+ } -+ return 0; -+} -+ -+static u8 spi_nand_read_byte(struct mtd_info *mtd) -+{ -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct spi_nand *snand = nand_get_controller_data(chip); -+ char val = 0xff; -+ -+ if (snand->buf_start < snand->buf_size) -+ val = snand->data_buf[snand->buf_start++]; -+ return val; -+} -+ -+static void spi_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len) -+{ -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct spi_nand *snand = nand_get_controller_data(chip); -+ size_t n = min_t(size_t, len, snand->buf_size - snand->buf_start); -+ -+ memcpy(snand->data_buf + snand->buf_start, buf, n); -+ snand->buf_start += n; -+} -+ -+static void spi_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len) -+{ -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct spi_nand *snand = nand_get_controller_data(chip); -+ size_t n = min_t(size_t, len, snand->buf_size - snand->buf_start); -+ -+ memcpy(buf, snand->data_buf + snand->buf_start, n); -+ snand->buf_start += n; -+} -+ -+static int spi_nand_write_page_hwecc(struct mtd_info *mtd, -+ struct nand_chip *chip, const uint8_t *buf, int oob_required, -+ int page) -+{ -+ chip->write_buf(mtd, buf, mtd->writesize); -+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); -+ -+ return 0; -+} -+ -+static int spi_nand_read_page_hwecc(struct mtd_info *mtd, -+ struct nand_chip *chip, uint8_t *buf, int oob_required, -+ int page) -+{ -+ struct spi_nand *snand = nand_get_controller_data(chip); -+ -+ chip->read_buf(mtd, buf, mtd->writesize); -+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -+ -+ return snand->bitflips; -+} -+ -+static int spi_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) -+{ -+ struct spi_nand *snand = nand_get_controller_data(chip); -+ int ret; -+ -+ ret = spi_nand_wait_till_ready(snand); -+ -+ if (ret < 0) { -+ return NAND_STATUS_FAIL; -+ } else if (ret & SPI_NAND_STATUS_REG_PROG_FAIL) { -+ dev_err(snand->dev, "page program failed\n"); -+ return NAND_STATUS_FAIL; -+ } else if (ret & SPI_NAND_STATUS_REG_ERASE_FAIL) { -+ dev_err(snand->dev, "block erase failed\n"); -+ return NAND_STATUS_FAIL; -+ } -+ -+ return NAND_STATUS_READY; -+} -+ -+static void spi_nand_cmdfunc(struct mtd_info *mtd, unsigned int command, -+ int column, int page_addr) -+{ -+ struct nand_chip *chip = mtd_to_nand(mtd); -+ struct spi_nand *snand = nand_get_controller_data(chip); -+ -+ /* -+ * In case there's any unsupported command, let's make sure -+ * we don't keep garbage around in the buffer. -+ */ -+ if (command != NAND_CMD_PAGEPROG) { -+ spi_nand_clear_buffer(snand); -+ snand->page_addr = 0; -+ } -+ -+ switch (command) { -+ case NAND_CMD_READ0: -+ spi_nand_read_page(snand, page_addr, 0, mtd->writesize); -+ break; -+ case NAND_CMD_READOOB: -+ spi_nand_disable_ecc(snand); -+ spi_nand_read_page(snand, page_addr, mtd->writesize, -+ mtd->oobsize); -+ spi_nand_enable_ecc(snand); -+ break; -+ case NAND_CMD_READID: -+ spi_nand_read_id(snand); -+ break; -+ case NAND_CMD_ERASE1: -+ spi_nand_erase(snand, page_addr); -+ break; -+ case NAND_CMD_ERASE2: -+ /* There's nothing to do here, as the erase is one-step */ -+ break; -+ case NAND_CMD_SEQIN: -+ snand->buf_start = column; -+ snand->page_addr = page_addr; -+ break; -+ case NAND_CMD_PAGEPROG: -+ spi_nand_write(snand); -+ break; -+ case NAND_CMD_STATUS: -+ spi_nand_status(snand); -+ break; -+ case NAND_CMD_RESET: -+ spi_nand_reset(snand); -+ break; -+ default: -+ dev_err(&mtd->dev, "unknown command 0x%x\n", command); -+ } -+} -+ -+static void spi_nand_select_chip(struct mtd_info *mtd, int chip) -+{ -+ /* We need this to override the default */ -+} -+ -+int spi_nand_check(struct spi_nand *snand) -+{ -+ if (!snand->dev) -+ return -ENODEV; -+ if (!snand->read_cache) -+ return -ENODEV; -+ if (!snand->load_page) -+ return -ENODEV; -+ if (!snand->store_cache) -+ return -ENODEV; -+ if (!snand->write_page) -+ return -ENODEV; -+ if (!snand->write_reg) -+ return -ENODEV; -+ if (!snand->read_reg) -+ return -ENODEV; -+ if (!snand->block_erase) -+ return -ENODEV; -+ if (!snand->reset) -+ return -ENODEV; -+ if (!snand->write_enable) -+ return -ENODEV; -+ if (!snand->write_disable) -+ return -ENODEV; -+ if (!snand->get_ecc_status) -+ return -ENODEV; -+ return 0; -+} -+ -+int spi_nand_register(struct spi_nand *snand, struct nand_flash_dev *flash_ids) -+{ -+ struct nand_chip *chip = &snand->nand_chip; -+ struct mtd_info *mtd = nand_to_mtd(chip); -+ struct device_node *np = snand->dev->of_node; -+ const char __maybe_unused *of_mtd_name = NULL; -+ int ret; -+ -+ /* Let's check all the hooks are in-place so we don't panic later */ -+ ret = spi_nand_check(snand); -+ if (ret) -+ return ret; -+ -+ nand_set_controller_data(chip, snand); -+ nand_set_flash_node(chip, np); -+ chip->read_buf = spi_nand_read_buf; -+ chip->write_buf = spi_nand_write_buf; -+ chip->read_byte = spi_nand_read_byte; -+ chip->cmdfunc = spi_nand_cmdfunc; -+ chip->waitfunc = spi_nand_waitfunc; -+ chip->select_chip = spi_nand_select_chip; -+ chip->options |= NAND_NO_SUBPAGE_WRITE; -+ chip->bits_per_cell = 1; -+ -+ mtd_set_ooblayout(mtd, snand->ooblayout); -+ chip->ecc.read_page = spi_nand_read_page_hwecc; -+ chip->ecc.write_page = spi_nand_write_page_hwecc; -+ chip->ecc.mode = NAND_ECC_HW; -+ -+ if (of_property_read_bool(np, "nand-on-flash-bbt")) -+ chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; -+ -+#ifdef CONFIG_MTD_OF_PARTS -+ of_property_read_string(np, "linux,mtd-name", &of_mtd_name); -+#endif -+ if (of_mtd_name) -+ mtd->name = of_mtd_name; -+ else -+ mtd->name = snand->name; -+ mtd->owner = THIS_MODULE; -+ -+ /* Allocate buffer to be used to read/write the internal registers */ -+ snand->buf = kmalloc(SPI_NAND_CMD_BUF_LEN, GFP_KERNEL); -+ if (!snand->buf) -+ return -ENOMEM; -+ -+ /* This is enabled at device power up but we'd better make sure */ -+ ret = spi_nand_enable_ecc(snand); -+ if (ret) -+ return ret; -+ -+ /* Preallocate buffer for flash identification (NAND_CMD_READID) */ -+ snand->buf_size = SPI_NAND_CMD_BUF_LEN; -+ snand->data_buf = kmalloc(snand->buf_size, GFP_KERNEL); -+ -+ ret = nand_scan_ident(mtd, 1, flash_ids); -+ if (ret) -+ return ret; -+ -+ /* -+ * SPI NAND has on-die ECC, which means we can correct as much as -+ * we are required to. This must be done after identification of -+ * the device. -+ */ -+ chip->ecc.strength = chip->ecc_strength_ds; -+ chip->ecc.size = chip->ecc_step_ds; -+ -+ /* -+ * Unlock all the device before calling nand_scan_tail. This is needed -+ * in case the in-flash bad block table needs to be created. -+ * We could override __nand_unlock(), but since it's not currently used -+ * by the NAND core we call this explicitly. -+ */ -+ snand->buf[0] = SPI_NAND_PROT_UNLOCK_ALL; -+ ret = snand->write_reg(snand, SPI_NAND_LOCK_REG, snand->buf); -+ if (ret) -+ return ret; -+ -+ /* Free the buffer and allocate a good one, to fit a page plus OOB */ -+ kfree(snand->data_buf); -+ -+ snand->buf_size = mtd->writesize + mtd->oobsize; -+ snand->data_buf = kmalloc(snand->buf_size, GFP_KERNEL); -+ if (!snand->data_buf) -+ return -ENOMEM; -+ -+ ret = nand_scan_tail(mtd); -+ if (ret) -+ return ret; -+ -+ return mtd_device_register(mtd, NULL, 0); -+} -+EXPORT_SYMBOL_GPL(spi_nand_register); -+ -+void spi_nand_unregister(struct spi_nand *snand) -+{ -+ kfree(snand->buf); -+ kfree(snand->data_buf); -+} -+EXPORT_SYMBOL_GPL(spi_nand_unregister); -+ -+MODULE_AUTHOR("Ezequiel Garcia "); -+MODULE_DESCRIPTION("Framework for SPI NAND"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/include/linux/mtd/spi-nand.h -@@ -0,0 +1,54 @@ -+/* -+ * Copyright (C) 2014 Imagination Technologies Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; version 2 of the License. -+ */ -+ -+#ifndef __LINUX_MTD_SPI_NAND_H -+#define __LINUX_MTD_SPI_NAND_H -+ -+#include -+#include -+ -+struct spi_nand { -+ struct nand_chip nand_chip; -+ struct device *dev; -+ const char *name; -+ -+ u8 *buf, *data_buf; -+ size_t buf_size; -+ off_t buf_start; -+ unsigned int page_addr; -+ unsigned int bitflips; -+ bool ecc; -+ struct mtd_ooblayout_ops *ooblayout; -+ -+ int (*reset)(struct spi_nand *snand); -+ int (*read_id)(struct spi_nand *snand, u8 *buf); -+ -+ int (*write_disable)(struct spi_nand *snand); -+ int (*write_enable)(struct spi_nand *snand); -+ -+ int (*read_reg)(struct spi_nand *snand, u8 opcode, u8 *buf); -+ int (*write_reg)(struct spi_nand *snand, u8 opcode, u8 *buf); -+ void (*get_ecc_status)(unsigned int status, -+ unsigned int *corrected, -+ unsigned int *ecc_errors); -+ -+ int (*store_cache)(struct spi_nand *snand, unsigned int page_offset, -+ size_t length, u8 *write_buf); -+ int (*write_page)(struct spi_nand *snand, unsigned int page_addr); -+ int (*load_page)(struct spi_nand *snand, unsigned int page_addr); -+ int (*read_cache)(struct spi_nand *snand, unsigned int page_offset, -+ size_t length, u8 *read_buf); -+ int (*block_erase)(struct spi_nand *snand, unsigned int page_addr); -+ -+ void *priv; -+}; -+ -+int spi_nand_register(struct spi_nand *snand, struct nand_flash_dev *flash_ids); -+void spi_nand_unregister(struct spi_nand *snand); -+ -+#endif diff --git a/target/linux/pistachio/patches-5.4/414-mtd-spi-nand-Support-Gigadevice-GD5F.patch b/target/linux/pistachio/patches-5.4/414-mtd-spi-nand-Support-Gigadevice-GD5F.patch deleted file mode 100644 index 1f1461061c..0000000000 --- a/target/linux/pistachio/patches-5.4/414-mtd-spi-nand-Support-Gigadevice-GD5F.patch +++ /dev/null @@ -1,524 +0,0 @@ -From 7723e59d483a883578115a73eb87eb7fff0ff724 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 28 Feb 2017 10:37:24 +0000 -Subject: mtd: spi-nand: Support Gigadevice GD5F - -This commit uses the recently introduced SPI NAND framework to support -the Gigadevice GD5F serial NAND device. - -The current support includes: - - * Page read and page program operations (using on-die ECC) - * Page out-of-band read - * Erase - * Reset - * Device status retrieval - * Device ID retrieval - -(based on http://lists.infradead.org/pipermail/linux-mtd/2014-December/056769.html) - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Ian Pozella ---- - drivers/mtd/spi-nand/Kconfig | 10 + - drivers/mtd/spi-nand/Makefile | 1 + - drivers/mtd/spi-nand/spi-nand-device.c | 472 +++++++++++++++++++++++++++++++++ - 3 files changed, 483 insertions(+) - create mode 100644 drivers/mtd/spi-nand/spi-nand-device.c - ---- a/drivers/mtd/spi-nand/Kconfig -+++ b/drivers/mtd/spi-nand/Kconfig -@@ -5,3 +5,13 @@ menuconfig MTD_SPI_NAND - help - This is the framework for the SPI NAND. - -+if MTD_SPI_NAND -+ -+config MTD_SPI_NAND_DEVICES -+ tristate "Support for SPI NAND devices" -+ default y -+ depends on MTD_SPI_NAND -+ help -+ Select this option if you require support for SPI NAND devices. -+ -+endif # MTD_SPI_NAND ---- a/drivers/mtd/spi-nand/Makefile -+++ b/drivers/mtd/spi-nand/Makefile -@@ -1 +1,2 @@ - obj-$(CONFIG_MTD_SPI_NAND) += spi-nand-base.o -+obj-$(CONFIG_MTD_SPI_NAND_DEVICES) += spi-nand-device.o ---- /dev/null -+++ b/drivers/mtd/spi-nand/spi-nand-device.c -@@ -0,0 +1,472 @@ -+/* -+ * Copyright (C) 2014 Imagination Technologies Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; version 2 of the License. -+ * -+ * Notes: -+ * 1. We avoid using a stack-allocated buffer for SPI messages. Using -+ * a kmalloced buffer is probably better, given we shouldn't assume -+ * any particular usage by SPI core. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* SPI NAND commands */ -+#define SPI_NAND_WRITE_ENABLE 0x06 -+#define SPI_NAND_WRITE_DISABLE 0x04 -+#define SPI_NAND_GET_FEATURE 0x0f -+#define SPI_NAND_SET_FEATURE 0x1f -+#define SPI_NAND_PAGE_READ 0x13 -+#define SPI_NAND_READ_CACHE 0x03 -+#define SPI_NAND_FAST_READ_CACHE 0x0b -+#define SPI_NAND_READ_CACHE_X2 0x3b -+#define SPI_NAND_READ_CACHE_X4 0x6b -+#define SPI_NAND_READ_CACHE_DUAL_IO 0xbb -+#define SPI_NAND_READ_CACHE_QUAD_IO 0xeb -+#define SPI_NAND_READ_ID 0x9f -+#define SPI_NAND_PROGRAM_LOAD 0x02 -+#define SPI_NAND_PROGRAM_LOAD4 0x32 -+#define SPI_NAND_PROGRAM_EXEC 0x10 -+#define SPI_NAND_PROGRAM_LOAD_RANDOM 0x84 -+#define SPI_NAND_PROGRAM_LOAD_RANDOM4 0xc4 -+#define SPI_NAND_BLOCK_ERASE 0xd8 -+#define SPI_NAND_RESET 0xff -+ -+#define SPI_NAND_GD5F_READID_LEN 2 -+ -+#define SPI_NAND_GD5F_ECC_MASK (BIT(0) | BIT(1) | BIT(2)) -+#define SPI_NAND_GD5F_ECC_UNCORR (BIT(0) | BIT(1) | BIT(2)) -+#define SPI_NAND_GD5F_ECC_SHIFT 4 -+ -+static int spi_nand_gd5f_ooblayout_256_ecc(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobregion) -+{ -+ if (section) -+ return -ERANGE; -+ -+ oobregion->offset = 128; -+ oobregion->length = 128; -+ -+ return 0; -+} -+ -+static int spi_nand_gd5f_ooblayout_256_free(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oobregion) -+{ -+ if (section) -+ return -ERANGE; -+ -+ oobregion->offset = 1; -+ oobregion->length = 127; -+ -+ return 0; -+} -+ -+static const struct mtd_ooblayout_ops spi_nand_gd5f_oob_256_ops = { -+ .ecc = spi_nand_gd5f_ooblayout_256_ecc, -+ .free = spi_nand_gd5f_ooblayout_256_free, -+}; -+ -+static struct nand_flash_dev spi_nand_flash_ids[] = { -+ { -+ .name = "SPI NAND 512MiB 3,3V", -+ .id = { NAND_MFR_GIGADEVICE, 0xb4 }, -+ .chipsize = 512, -+ .pagesize = SZ_4K, -+ .erasesize = SZ_256K, -+ .id_len = 2, -+ .oobsize = 256, -+ .ecc.strength_ds = 8, -+ .ecc.step_ds = 512, -+ }, -+ { -+ .name = "SPI NAND 512MiB 1,8V", -+ .id = { NAND_MFR_GIGADEVICE, 0xa4 }, -+ .chipsize = 512, -+ .pagesize = SZ_4K, -+ .erasesize = SZ_256K, -+ .id_len = 2, -+ .oobsize = 256, -+ .ecc.strength_ds = 8, -+ .ecc.step_ds = 512, -+ }, -+}; -+ -+enum spi_nand_device_variant { -+ SPI_NAND_GENERIC, -+ SPI_NAND_GD5F, -+}; -+ -+struct spi_nand_device_cmd { -+ -+ /* -+ * Command and address. I/O errors have been observed if a -+ * separate spi_transfer is used for command and address, -+ * so keep them together. -+ */ -+ u32 n_cmd; -+ u8 cmd[5]; -+ -+ /* Tx data */ -+ u32 n_tx; -+ u8 *tx_buf; -+ -+ /* Rx data */ -+ u32 n_rx; -+ u8 *rx_buf; -+ u8 rx_nbits; -+ u8 tx_nbits; -+}; -+ -+struct spi_nand_device { -+ struct spi_nand spi_nand; -+ struct spi_device *spi; -+ -+ struct spi_nand_device_cmd cmd; -+}; -+ -+static int spi_nand_send_command(struct spi_device *spi, -+ struct spi_nand_device_cmd *cmd) -+{ -+ struct spi_message message; -+ struct spi_transfer x[2]; -+ -+ if (!cmd->n_cmd) { -+ dev_err(&spi->dev, "cannot send an empty command\n"); -+ return -EINVAL; -+ } -+ -+ if (cmd->n_tx && cmd->n_rx) { -+ dev_err(&spi->dev, "cannot send and receive data at the same time\n"); -+ return -EINVAL; -+ } -+ -+ spi_message_init(&message); -+ memset(x, 0, sizeof(x)); -+ -+ /* Command and address */ -+ x[0].len = cmd->n_cmd; -+ x[0].tx_buf = cmd->cmd; -+ x[0].tx_nbits = cmd->tx_nbits; -+ spi_message_add_tail(&x[0], &message); -+ -+ /* Data to be transmitted */ -+ if (cmd->n_tx) { -+ x[1].len = cmd->n_tx; -+ x[1].tx_buf = cmd->tx_buf; -+ x[1].tx_nbits = cmd->tx_nbits; -+ spi_message_add_tail(&x[1], &message); -+ } -+ -+ /* Data to be received */ -+ if (cmd->n_rx) { -+ x[1].len = cmd->n_rx; -+ x[1].rx_buf = cmd->rx_buf; -+ x[1].rx_nbits = cmd->rx_nbits; -+ spi_message_add_tail(&x[1], &message); -+ } -+ -+ return spi_sync(spi, &message); -+} -+ -+static int spi_nand_device_reset(struct spi_nand *snand) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ cmd->n_cmd = 1; -+ cmd->cmd[0] = SPI_NAND_RESET; -+ -+ dev_dbg(snand->dev, "%s\n", __func__); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static int spi_nand_device_read_reg(struct spi_nand *snand, u8 opcode, u8 *buf) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ cmd->n_cmd = 2; -+ cmd->cmd[0] = SPI_NAND_GET_FEATURE; -+ cmd->cmd[1] = opcode; -+ cmd->n_rx = 1; -+ cmd->rx_buf = buf; -+ -+ dev_dbg(snand->dev, "%s: reg 0%x\n", __func__, opcode); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static int spi_nand_device_write_reg(struct spi_nand *snand, u8 opcode, u8 *buf) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ cmd->n_cmd = 2; -+ cmd->cmd[0] = SPI_NAND_SET_FEATURE; -+ cmd->cmd[1] = opcode; -+ cmd->n_tx = 1; -+ cmd->tx_buf = buf; -+ -+ dev_dbg(snand->dev, "%s: reg 0%x\n", __func__, opcode); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static int spi_nand_device_write_enable(struct spi_nand *snand) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ cmd->n_cmd = 1; -+ cmd->cmd[0] = SPI_NAND_WRITE_ENABLE; -+ -+ dev_dbg(snand->dev, "%s\n", __func__); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static int spi_nand_device_write_disable(struct spi_nand *snand) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ cmd->n_cmd = 1; -+ cmd->cmd[0] = SPI_NAND_WRITE_DISABLE; -+ -+ dev_dbg(snand->dev, "%s\n", __func__); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static int spi_nand_device_write_page(struct spi_nand *snand, -+ unsigned int page_addr) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ cmd->n_cmd = 4; -+ cmd->cmd[0] = SPI_NAND_PROGRAM_EXEC; -+ cmd->cmd[1] = (u8)((page_addr & 0xff0000) >> 16); -+ cmd->cmd[2] = (u8)((page_addr & 0xff00) >> 8); -+ cmd->cmd[3] = (u8)(page_addr & 0xff); -+ -+ dev_dbg(snand->dev, "%s: page 0x%x\n", __func__, page_addr); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static int spi_nand_device_store_cache(struct spi_nand *snand, -+ unsigned int page_offset, size_t length, -+ u8 *write_buf) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ struct spi_device *spi = snand_dev->spi; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ cmd->n_cmd = 3; -+ cmd->cmd[0] = spi->mode & SPI_TX_QUAD ? SPI_NAND_PROGRAM_LOAD4 : -+ SPI_NAND_PROGRAM_LOAD; -+ cmd->cmd[1] = (u8)((page_offset & 0xff00) >> 8); -+ cmd->cmd[2] = (u8)(page_offset & 0xff); -+ cmd->n_tx = length; -+ cmd->tx_buf = write_buf; -+ cmd->tx_nbits = spi->mode & SPI_TX_QUAD ? 4 : 1; -+ -+ dev_dbg(snand->dev, "%s: offset 0x%x\n", __func__, page_offset); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static int spi_nand_device_load_page(struct spi_nand *snand, -+ unsigned int page_addr) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ cmd->n_cmd = 4; -+ cmd->cmd[0] = SPI_NAND_PAGE_READ; -+ cmd->cmd[1] = (u8)((page_addr & 0xff0000) >> 16); -+ cmd->cmd[2] = (u8)((page_addr & 0xff00) >> 8); -+ cmd->cmd[3] = (u8)(page_addr & 0xff); -+ -+ dev_dbg(snand->dev, "%s: page 0x%x\n", __func__, page_addr); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static int spi_nand_device_read_cache(struct spi_nand *snand, -+ unsigned int page_offset, size_t length, -+ u8 *read_buf) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ struct spi_device *spi = snand_dev->spi; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ if ((spi->mode & SPI_RX_DUAL) || (spi->mode & SPI_RX_QUAD)) -+ cmd->n_cmd = 5; -+ else -+ cmd->n_cmd = 4; -+ cmd->cmd[0] = (spi->mode & SPI_RX_QUAD) ? SPI_NAND_READ_CACHE_X4 : -+ ((spi->mode & SPI_RX_DUAL) ? SPI_NAND_READ_CACHE_X2 : -+ SPI_NAND_READ_CACHE); -+ cmd->cmd[1] = 0; /* dummy byte */ -+ cmd->cmd[2] = (u8)((page_offset & 0xff00) >> 8); -+ cmd->cmd[3] = (u8)(page_offset & 0xff); -+ cmd->cmd[4] = 0; /* dummy byte */ -+ cmd->n_rx = length; -+ cmd->rx_buf = read_buf; -+ cmd->rx_nbits = (spi->mode & SPI_RX_QUAD) ? 4 : -+ ((spi->mode & SPI_RX_DUAL) ? 2 : 1); -+ -+ dev_dbg(snand->dev, "%s: offset 0x%x\n", __func__, page_offset); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static int spi_nand_device_block_erase(struct spi_nand *snand, -+ unsigned int page_addr) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ cmd->n_cmd = 4; -+ cmd->cmd[0] = SPI_NAND_BLOCK_ERASE; -+ cmd->cmd[1] = (u8)((page_addr & 0xff0000) >> 16); -+ cmd->cmd[2] = (u8)((page_addr & 0xff00) >> 8); -+ cmd->cmd[3] = (u8)(page_addr & 0xff); -+ -+ dev_dbg(snand->dev, "%s: block 0x%x\n", __func__, page_addr); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static int spi_nand_gd5f_read_id(struct spi_nand *snand, u8 *buf) -+{ -+ struct spi_nand_device *snand_dev = snand->priv; -+ struct spi_nand_device_cmd *cmd = &snand_dev->cmd; -+ -+ memset(cmd, 0, sizeof(struct spi_nand_device_cmd)); -+ cmd->n_cmd = 1; -+ cmd->cmd[0] = SPI_NAND_READ_ID; -+ cmd->n_rx = SPI_NAND_GD5F_READID_LEN; -+ cmd->rx_buf = buf; -+ -+ dev_dbg(snand->dev, "%s\n", __func__); -+ -+ return spi_nand_send_command(snand_dev->spi, cmd); -+} -+ -+static void spi_nand_gd5f_ecc_status(unsigned int status, -+ unsigned int *corrected, -+ unsigned int *ecc_error) -+{ -+ unsigned int ecc_status = (status >> SPI_NAND_GD5F_ECC_SHIFT) & -+ SPI_NAND_GD5F_ECC_MASK; -+ -+ *ecc_error = (ecc_status == SPI_NAND_GD5F_ECC_UNCORR) ? 1 : 0; -+ if (*ecc_error == 0) -+ *corrected = (ecc_status > 1) ? (2 + ecc_status) : 0; -+} -+ -+static int spi_nand_device_probe(struct spi_device *spi) -+{ -+ enum spi_nand_device_variant variant; -+ struct spi_nand_device *priv; -+ struct spi_nand *snand; -+ int ret; -+ -+ priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ snand = &priv->spi_nand; -+ -+ snand->read_cache = spi_nand_device_read_cache; -+ snand->load_page = spi_nand_device_load_page; -+ snand->store_cache = spi_nand_device_store_cache; -+ snand->write_page = spi_nand_device_write_page; -+ snand->write_reg = spi_nand_device_write_reg; -+ snand->read_reg = spi_nand_device_read_reg; -+ snand->block_erase = spi_nand_device_block_erase; -+ snand->reset = spi_nand_device_reset; -+ snand->write_enable = spi_nand_device_write_enable; -+ snand->write_disable = spi_nand_device_write_disable; -+ snand->dev = &spi->dev; -+ snand->priv = priv; -+ -+ /* This'll mean we won't need to specify any specific compatible string -+ * for a given device, and instead just support spi-nand. -+ */ -+ variant = spi_get_device_id(spi)->driver_data; -+ switch (variant) { -+ case SPI_NAND_GD5F: -+ snand->read_id = spi_nand_gd5f_read_id; -+ snand->get_ecc_status = spi_nand_gd5f_ecc_status; -+ snand->ooblayout = &spi_nand_gd5f_oob_256_ops; -+ break; -+ default: -+ dev_err(snand->dev, "unknown device\n"); -+ return -ENODEV; -+ } -+ -+ spi_set_drvdata(spi, snand); -+ priv->spi = spi; -+ -+ ret = spi_nand_register(snand, spi_nand_flash_ids); -+ if (ret) -+ return ret; -+ return 0; -+} -+ -+static int spi_nand_device_remove(struct spi_device *spi) -+{ -+ struct spi_nand *snand = spi_get_drvdata(spi); -+ -+ spi_nand_unregister(snand); -+ -+ return 0; -+} -+ -+const struct spi_device_id spi_nand_id_table[] = { -+ { "spi-nand", SPI_NAND_GENERIC }, -+ { "gd5f", SPI_NAND_GD5F }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(spi, spi_nand_id_table); -+ -+static struct spi_driver spi_nand_device_driver = { -+ .driver = { -+ .name = "spi_nand_device", -+ .owner = THIS_MODULE, -+ }, -+ .id_table = spi_nand_id_table, -+ .probe = spi_nand_device_probe, -+ .remove = spi_nand_device_remove, -+}; -+module_spi_driver(spi_nand_device_driver); -+ -+MODULE_AUTHOR("Ezequiel Garcia "); -+MODULE_DESCRIPTION("SPI NAND device support"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-add-nor-partition-name.patch b/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-add-nor-partition-name.patch index 6af11eaa36..a8d021373b 100644 --- a/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-add-nor-partition-name.patch +++ b/target/linux/pistachio/patches-5.4/901-MIPS-DTS-img-marduk-add-nor-partition-name.patch @@ -10,7 +10,7 @@ Signed-off-by: Ian Pozella --- a/arch/mips/boot/dts/img/pistachio_marduk.dts +++ b/arch/mips/boot/dts/img/pistachio_marduk.dts -@@ -90,6 +90,7 @@ +@@ -87,6 +87,7 @@ compatible = "spansion,s25fl016k", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; diff --git a/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-add-nand-device-support.patch b/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-add-nand-device-support.patch index bd03f08126..d95f1af94d 100644 --- a/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-add-nand-device-support.patch +++ b/target/linux/pistachio/patches-5.4/902-MIPS-DTS-img-marduk-add-nand-device-support.patch @@ -10,12 +10,12 @@ Signed-off-by: Abhimanyu Vishwakarma --- a/arch/mips/boot/dts/img/pistachio_marduk.dts +++ b/arch/mips/boot/dts/img/pistachio_marduk.dts -@@ -92,6 +92,17 @@ +@@ -89,6 +89,17 @@ spi-max-frequency = <50000000>; linux,mtd-name = "spi-nor"; }; + flash@1 { -+ compatible = "gigadevice,gd5f"; ++ compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <50000000>; + nand-on-flash-bbt;