From: Shiji Yang <yangshiji66@qq.com>
Date: Thu, 1 Feb 2024 11:39:51 +0000 (+0800)
Subject: ath79: add back board-2.bin to COMFAST devices
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3c7ce20d5cd08b54fffd73a38900534a22d0aeca;p=openwrt%2Fstaging%2Frobimarko.git

ath79: add back board-2.bin to COMFAST devices

The ath10k driver will load both pre-calibration data and board-2.bin
if board-2.bin exists. So it's not necessary to remove it. And this
change won't increase jffs2 image size.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
---

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 1acbf35947..a5d244d85b 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -185,7 +185,6 @@ case "$FIRMWARE" in
 		ath10k_patch_mac $(mtd_get_mac_binary art 0x6)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
 		;;
 	comfast,cf-e375ac|\
 	comfast,cf-e560ac|\
@@ -195,7 +194,6 @@ case "$FIRMWARE" in
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
 		;;
 	dlink,dir-842-c1|\
 	dlink,dir-842-c2|\