From: Sebastian Schaper Date: Sat, 7 Jan 2023 12:45:44 +0000 (+0100) Subject: ramips: add support for D-Link DAP-X1860 A1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3c31f6b521bb5fc49e222a8f2bcd454b73452a0e;p=openwrt%2Fstaging%2Fnbd.git ramips: add support for D-Link DAP-X1860 A1 The DAP-X1860 is a wall-plug AX1800 repeater. Specifications: - MT7621, 256 MiB RAM, 128 MiB SPI NAND - MT7915 + MT7975 2x2 802.11ax (DBDC) - Ethernet: 1 port 10/100/1000 - LED RSSI bargraph (2x green, 1x red/orange), status and RSSI LEDs are incorrectly populated red/orange (should be red/green according to documentation) Installation: - Keep reset button pressed during plug-in - Web Recovery Updater is at 192.168.0.50 - Upload factory.bin, confirm flashing (seems to work best with Chromium-based browsers) Revert to OEM firmware: - tar -xvf DAP-X1860_RevA_Firmware_101b94.bin - openssl enc -d -md md5 -aes-256-cbc -in FWImage.st2 \ -out FWImage.st1 -k MB0dBx62oXJXDvt12lETWQ== - tar -xvf FWImage.st1 - flash kernel_DAP-X1860.bin via Recovery Signed-off-by: Sebastian Schaper --- diff --git a/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts new file mode 100644 index 0000000000..edc1c6544c --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "dlink,dap-x1860-a1", "mediatek,mt7621-soc"; + model = "D-Link DAP-X1860 A1"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_power_orange; + led-failsafe = &led_power_red; + led-running = &led_power_orange; + led-upgrade = &led_power_red; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power_red: power_red { + label = "red:power"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + + led_power_orange: power_orange { + label = "orange:power"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + rssihigh { + label = "green:rssihigh"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + + rssimedium { + label = "green:rssimedium"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + + rssilow_orange { + label = "orange:rssilow"; + gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + }; + + rssilow_green { + label = "green:rssilow"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + + virtual_flash { + compatible = "mtd-concat"; + + devices = <&fwconcat0 &fwconcat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x0 0x0>; + }; + }; + }; +}; + +&nand { + status = "okay"; + + mediatek,nmbm; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "config"; + reg = <0x80000 0x80000>; + read-only; + }; + + factory: partition@100000 { + label = "factory"; + reg = <0x100000 0x80000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_4: macaddr@4 { + reg = <0x4 0x6>; + }; + }; + + partition@180000 { + label = "kernel"; + reg = <0x180000 0x0800000>; + }; + + fwconcat0: partition@980000 { + label = "fwconcat0"; + reg = <0x980000 0x2c00000>; + }; + + partition@3580000 { + label = "manufacture"; + reg = <0x3580000 0x400000>; + read-only; + }; + + partition@3980000 { + label = "storage"; + reg = <0x3980000 0x680000>; + read-only; + }; + + fwconcat1: partition@4000000 { + label = "fwconcat1"; + reg = <0x4000000 0x3800000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + mediatek,disable-radar-background; + }; +}; + +ðernet { + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + gpio-controller; + #gpio-cells = <2>; + + ports { + port@0 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&state_default { + gpio { + groups = "uart2"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index cbcf67c236..2269833e48 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -478,6 +478,27 @@ define Device/cudy_x6 endef TARGET_DEVICES += cudy_x6 +define Device/dlink_dap-x1860-a1 + $(Device/dsa-migration) + IMAGE_SIZE := 53248k + DEVICE_VENDOR := D-Link + DEVICE_MODEL := DAP-X1860 + DEVICE_VARIANT := A1 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 8192k + KERNEL_LOADADDR := 0x82000000 + KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb + IMAGES += factory.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \ + check-size | elx-header 011b0060 8844A2D168B45A2D + DEVICE_PACKAGES := kmod-mt7915-firmware rssileds +endef +TARGET_DEVICES += dlink_dap-x1860-a1 + define Device/dlink_dir-8xx-a1 $(Device/dsa-migration) IMAGE_SIZE := 16000k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 9e0eaac941..5fafb9b50a 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -56,6 +56,13 @@ jcg,y2|\ xzwifi,creativebox-v1) ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan" ;; +dlink,dap-x1860-a1) + ucidef_set_rssimon "wlan1" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "orange:rssilow" "wlan1" "1" "25" + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "26" "100" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimedium" "wlan1" "51" "100" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "76" "100" + ;; dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index dea433dec4..9a8e385a31 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -11,6 +11,7 @@ ramips_setup_interfaces() ampedwireless,ally-00x19k|\ asus,rp-ac56|\ asus,rp-ac87|\ + dlink,dap-x1860-a1|\ edimax,re23s|\ mikrotik,ltap-2hnd|\ mikrotik,routerboard-m11g|\ diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 69ecaefd27..161bd942db 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -22,6 +22,13 @@ case "$board" in hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress ;; + dlink,dap-x1860-a1) + hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" + [ "$PHYNBR" = "0" ] && \ + macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && \ + macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress + ;; dlink,dir-853-a3) [ "$PHYNBR" = "0" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index fd856e6b3a..53ff9c016c 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -59,6 +59,7 @@ platform_do_upgrade() { beeline,smartbox-giga|\ beeline,smartbox-turbo|\ belkin,rt1800|\ + dlink,dap-x1860-a1|\ dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1|\