From: Christian Marangi Date: Wed, 20 Mar 2024 00:21:39 +0000 (+0100) Subject: kernel/ipq806x: Restore kernel files for v6.1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3bf06ea9b3841688b5c3aa99a24f8ec0b4f5280f;p=openwrt%2Fopenwrt.git kernel/ipq806x: Restore kernel files for v6.1 This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html for the original discussion. Signed-off-by: Christian Marangi --- diff --git a/target/linux/ipq806x/config-6.1 b/target/linux/ipq806x/config-6.1 new file mode 100644 index 0000000000..18325c0346 --- /dev/null +++ b/target/linux/ipq806x/config-6.1 @@ -0,0 +1,538 @@ +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_APQ_GCC_8084 is not set +# CONFIG_APQ_MMCC_8084 is not set +CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_ARCH_IPQ40XX is not set +CONFIG_ARCH_KEEP_MEMBLOCK=y +# CONFIG_ARCH_MDM9615 is not set +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +# CONFIG_ARCH_MSM8909 is not set +# CONFIG_ARCH_MSM8916 is not set +CONFIG_ARCH_MSM8960=y +CONFIG_ARCH_MSM8974=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MULTIPLATFORM=y +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y +CONFIG_ARM_ATAG_DTB_COMPAT_IGNORE_MEM=y +CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_CPU_SUSPEND=y +# CONFIG_ARM_CPU_TOPOLOGY is not set +CONFIG_ARM_GIC=y +CONFIG_ARM_HAS_GROUP_RELOCS=y +CONFIG_ARM_IPQ806X_FAB_DEVFREQ=y +CONFIG_ARM_KRAIT_CACHE_DEVFREQ=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_ARM_PATCH_IDIV=y +CONFIG_ARM_PATCH_PHYS_VIRT=y +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set +CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y +CONFIG_ARM_QCOM_SPM_CPUIDLE=y +# CONFIG_ARM_SMMU is not set +CONFIG_ARM_THUMB=y +CONFIG_ARM_UNWIND=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BOUNCE=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y +CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" +CONFIG_CC_NO_ARRAY_BOUNDS=y +CONFIG_CLKSRC_QCOM=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE_OVERRIDE=y +CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_CONTEXT_TRACKING=y +CONFIG_CONTEXT_TRACKING_IDLE=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_SPECTRE=y +CONFIG_CPU_THERMAL=y +CONFIG_CPU_THUMB_CAPABLE=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +# CONFIG_CRC32_SARWATE is not set +CONFIG_CRC32_SLICEBY8=y +CONFIG_CRC8=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_DEV_QCOM_RNG=y +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_DRBG_HMAC=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y +CONFIG_CRYPTO_LIB_SHA1=y +CONFIG_CRYPTO_LIB_SHA256=y +CONFIG_CRYPTO_LIB_UTILS=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_ZSTD=y +CONFIG_CURRENT_POINTER_IN_TPIDRURO=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_GPIO=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +CONFIG_DEVFREQ_GOV_PASSIVE=y +# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set +# CONFIG_DEVFREQ_GOV_POWERSAVE is not set +# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set +# CONFIG_DEVFREQ_GOV_USERSPACE is not set +# CONFIG_DEVFREQ_THERMAL is not set +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_OPS=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DTC=y +CONFIG_DT_IDLE_STATES=y +# CONFIG_DWMAC_GENERIC is not set +CONFIG_DWMAC_IPQ806X=y +# CONFIG_DWMAC_QCOM_ETHQOS is not set +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_EXCLUSIVE_SYSTEM_RAM=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FWNODE_MDIO=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_FW_LOADER_SYSFS=y +CONFIG_GCC11_NO_ARRAY_BOUNDS=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_VDSO_32=y +CONFIG_GLOB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_CDEV=y +CONFIG_GRO_CELLS=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_SMP=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HOTPLUG_CPU=y +CONFIG_HWMON=y +CONFIG_HWSPINLOCK=y +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_HW_RANDOM=y +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +# CONFIG_I2C_QCOM_CCI is not set +CONFIG_I2C_QUP=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_IOMMU_DEBUGFS is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set +CONFIG_IOMMU_SUPPORT=y +# CONFIG_IPQ_APSS_PLL is not set +# CONFIG_IPQ_GCC_4019 is not set +# CONFIG_IPQ_GCC_6018 is not set +CONFIG_IPQ_GCC_806X=y +# CONFIG_IPQ_GCC_8074 is not set +# CONFIG_IPQ_LCC_806X is not set +CONFIG_IRQCHIP=y +CONFIG_IRQSTACKS=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_KMAP_LOCAL=y +CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y +CONFIG_KPSS_XCC=y +CONFIG_KRAITCC=y +CONFIG_KRAIT_CLOCKS=y +CONFIG_KRAIT_L2_ACCESSORS=y +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_DEVRES=y +CONFIG_MDIO_GPIO=y +CONFIG_MDIO_IPQ8064=y +# CONFIG_MDM_GCC_9615 is not set +# CONFIG_MDM_LCC_9615 is not set +CONFIG_MEMFD_CREATE=y +# CONFIG_MFD_HI6421_SPMI is not set +CONFIG_MFD_QCOM_RPM=y +# CONFIG_MFD_SPMI_PMIC is not set +CONFIG_MFD_SYSCON=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGRATION=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_CQHCI=y +CONFIG_MMC_QCOM_DML=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_MSM=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MSM_GCC_8660=y +# CONFIG_MSM_GCC_8909 is not set +# CONFIG_MSM_GCC_8916 is not set +# CONFIG_MSM_GCC_8939 is not set +# CONFIG_MSM_GCC_8960 is not set +# CONFIG_MSM_GCC_8974 is not set +# CONFIG_MSM_GCC_8976 is not set +# CONFIG_MSM_GCC_8994 is not set +# CONFIG_MSM_GCC_8996 is not set +# CONFIG_MSM_GCC_8998 is not set +# CONFIG_MSM_GPUCC_8998 is not set +# CONFIG_MSM_IOMMU is not set +# CONFIG_MSM_LCC_8960 is not set +# CONFIG_MSM_MMCC_8960 is not set +# CONFIG_MSM_MMCC_8974 is not set +# CONFIG_MSM_MMCC_8996 is not set +# CONFIG_MSM_MMCC_8998 is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_NAND_QCOM=y +CONFIG_MTD_QCOMSMEM_PARTS=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_FIT_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEON=y +CONFIG_NET_DEVLINK=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_QCA8K=y +CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y +CONFIG_NET_DSA_TAG_QCA=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NET_SELFTESTS=y +CONFIG_NET_SWITCHDEV=y +CONFIG_NLS=y +CONFIG_NO_HZ=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=2 +CONFIG_NVMEM=y +CONFIG_NVMEM_LAYOUTS=y +CONFIG_NVMEM_QCOM_QFPROM=y +# CONFIG_NVMEM_QCOM_SEC_QFPROM is not set +# CONFIG_NVMEM_SPMI_SDAM is not set +CONFIG_NVMEM_SYSFS=y +CONFIG_NVMEM_U_BOOT_ENV=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_PADATA=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PAGE_POOL=y +CONFIG_PAGE_SIZE_LESS_THAN_256KB=y +CONFIG_PAGE_SIZE_LESS_THAN_64KB=y +CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_DW=y +CONFIG_PCIE_DW_HOST=y +CONFIG_PCIE_QCOM=y +CONFIG_PCI_DEBUG=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PCS_XPCS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PHYLIB_LEDS=y +CONFIG_PHYLINK=y +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +# CONFIG_PHY_QCOM_EDP is not set +# CONFIG_PHY_QCOM_IPQ4019_USB is not set +CONFIG_PHY_QCOM_IPQ806X_SATA=y +# CONFIG_PHY_QCOM_IPQ806X_USB is not set +# CONFIG_PHY_QCOM_PCIE2 is not set +# CONFIG_PHY_QCOM_QMP is not set +# CONFIG_PHY_QCOM_QUSB2 is not set +# CONFIG_PHY_QCOM_USB_HS_28NM is not set +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set +# CONFIG_PHY_QCOM_USB_SS is not set +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +CONFIG_PINCTRL_IPQ8064=y +# CONFIG_PINCTRL_MDM9615 is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_MSM8226 is not set +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8909 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +# CONFIG_PINCTRL_SDX65 is not set +CONFIG_PM_DEVFREQ=y +# CONFIG_PM_DEVFREQ_EVENT is not set +CONFIG_PM_OPP=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_MSM=y +CONFIG_POWER_SUPPLY=y +CONFIG_PPS=y +CONFIG_PREEMPT_NONE_BUILD=y +CONFIG_PRINTK_TIME=y +CONFIG_PTP_1588_CLOCK=y +CONFIG_PTP_1588_CLOCK_OPTIONAL=y +CONFIG_QCA83XX_PHY=y +# CONFIG_QCM_DISPCC_2290 is not set +# CONFIG_QCM_GCC_2290 is not set +# CONFIG_QCOM_A53PLL is not set +CONFIG_QCOM_ADM=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_CLK_RPM=y +# CONFIG_QCOM_COMMAND_DB is not set +# CONFIG_QCOM_CPR is not set +# CONFIG_QCOM_EBI2 is not set +# CONFIG_QCOM_GENI_SE is not set +CONFIG_QCOM_GSBI=y +CONFIG_QCOM_HFPLL=y +# CONFIG_QCOM_ICC_BWMON is not set +# CONFIG_QCOM_IOMMU is not set +# CONFIG_QCOM_LLCC is not set +CONFIG_QCOM_NET_PHYLIB=y +# CONFIG_QCOM_OCMEM is not set +# CONFIG_QCOM_PDC is not set +# CONFIG_QCOM_RMTFS_MEM is not set +CONFIG_QCOM_RPMCC=y +# CONFIG_QCOM_RPMH is not set +CONFIG_QCOM_SCM=y +# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set +CONFIG_QCOM_SMEM=y +# CONFIG_QCOM_SMSM is not set +CONFIG_QCOM_SOCINFO=y +CONFIG_QCOM_SPM=y +# CONFIG_QCOM_STATS is not set +CONFIG_QCOM_TCSR=y +CONFIG_QCOM_TSENS=y +CONFIG_QCOM_WDT=y +# CONFIG_QCS_GCC_404 is not set +# CONFIG_QCS_Q6SSTOP_404 is not set +# CONFIG_QCS_TURING_404 is not set +CONFIG_RANDSTRUCT_NONE=y +CONFIG_RAS=y +CONFIG_RATIONAL=y +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_QCOM_LABIBB is not set +CONFIG_REGULATOR_QCOM_RPM=y +# CONFIG_REGULATOR_QCOM_SPMI is not set +# CONFIG_REGULATOR_QCOM_USB_VBUS is not set +# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set +CONFIG_RESET_CONTROLLER=y +# CONFIG_RESET_QCOM_AOSS is not set +# CONFIG_RESET_QCOM_PDC is not set +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_I2C_AND_SPI=y +CONFIG_RTC_MC146818_LIB=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +# CONFIG_SC_CAMCC_7280 is not set +# CONFIG_SC_DISPCC_7180 is not set +# CONFIG_SC_GCC_7180 is not set +# CONFIG_SC_GCC_8280XP is not set +# CONFIG_SC_GPUCC_7180 is not set +# CONFIG_SC_LPASSCC_7280 is not set +# CONFIG_SC_LPASS_CORECC_7180 is not set +# CONFIG_SC_LPASS_CORECC_7280 is not set +# CONFIG_SC_MSS_7180 is not set +# CONFIG_SC_VIDEOCC_7180 is not set +# CONFIG_SDM_CAMCC_845 is not set +# CONFIG_SDM_DISPCC_845 is not set +# CONFIG_SDM_GCC_660 is not set +# CONFIG_SDM_GCC_845 is not set +# CONFIG_SDM_GPUCC_845 is not set +# CONFIG_SDM_LPASSCC_845 is not set +# CONFIG_SDM_VIDEOCC_845 is not set +# CONFIG_SDX_GCC_65 is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SGL_ALLOC=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +# CONFIG_SM_CAMCC_8450 is not set +# CONFIG_SM_GCC_8150 is not set +# CONFIG_SM_GCC_8250 is not set +# CONFIG_SM_GCC_8450 is not set +# CONFIG_SM_GPUCC_6350 is not set +# CONFIG_SM_GPUCC_8150 is not set +# CONFIG_SM_GPUCC_8250 is not set +# CONFIG_SM_GPUCC_8350 is not set +# CONFIG_SM_VIDEOCC_8150 is not set +# CONFIG_SM_VIDEOCC_8250 is not set +CONFIG_SOCK_RX_QUEUE_MAPPING=y +CONFIG_SOC_BUS=y +CONFIG_SOFTIRQ_ON_OWN_STACK=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +CONFIG_SPI_QUP=y +CONFIG_SPMI=y +# CONFIG_SPMI_HISI3670 is not set +CONFIG_SPMI_MSM_PMIC_ARB=y +# CONFIG_SPMI_PMIC_CLKDIV is not set +CONFIG_SRCU=y +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y +CONFIG_SWPHY=y +CONFIG_SWP_EMULATE=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_THERMAL=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +# CONFIG_UCLAMP_TASK is not set +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_UNWINDER_ARM=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_WATCHDOG_CORE=y +CONFIG_XPS=y +CONFIG_XXHASH=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZSTD_COMMON=y +CONFIG_ZSTD_COMPRESS=y +CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/ipq806x/patches-6.1/001-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch b/target/linux/ipq806x/patches-6.1/001-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch new file mode 100644 index 0000000000..9395f1b241 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/001-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch @@ -0,0 +1,60 @@ +From 09be1a39e685d8c5edd471fd1cac9a8f8280d2de Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Tue, 8 Nov 2022 22:17:34 +0100 +Subject: [PATCH] clk: qcom: kpss-xcc: register it as clk provider + +krait-cc use this driver for the secondary mux. Register it as a clk +provider to correctly use this clk in other drivers. + +Signed-off-by: Christian Marangi +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221108211734.3707-1-ansuelsmth@gmail.com +--- + drivers/clk/qcom/kpss-xcc.c | 13 +++++++++---- + 1 file changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/clk/qcom/kpss-xcc.c ++++ b/drivers/clk/qcom/kpss-xcc.c +@@ -31,12 +31,13 @@ MODULE_DEVICE_TABLE(of, kpss_xcc_match_t + + static int kpss_xcc_driver_probe(struct platform_device *pdev) + { ++ struct device *dev = &pdev->dev; + const struct of_device_id *id; + void __iomem *base; + struct clk_hw *hw; + const char *name; + +- id = of_match_device(kpss_xcc_match_table, &pdev->dev); ++ id = of_match_device(kpss_xcc_match_table, dev); + if (!id) + return -ENODEV; + +@@ -45,7 +46,7 @@ static int kpss_xcc_driver_probe(struct + return PTR_ERR(base); + + if (id->data) { +- if (of_property_read_string_index(pdev->dev.of_node, ++ if (of_property_read_string_index(dev->of_node, + "clock-output-names", + 0, &name)) + return -ENODEV; +@@ -55,12 +56,16 @@ static int kpss_xcc_driver_probe(struct + base += 0x28; + } + +- hw = devm_clk_hw_register_mux_parent_data_table(&pdev->dev, name, aux_parents, ++ hw = devm_clk_hw_register_mux_parent_data_table(dev, name, aux_parents, + ARRAY_SIZE(aux_parents), 0, + base, 0, 0x3, + 0, aux_parent_map, NULL); ++ if (IS_ERR(hw)) ++ return PTR_ERR(hw); + +- return PTR_ERR_OR_ZERO(hw); ++ of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get, hw); ++ ++ return 0; + } + + static struct platform_driver kpss_xcc_driver = { diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch new file mode 100644 index 0000000000..65c1fc17f2 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/002-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch @@ -0,0 +1,27 @@ +From 3198106a99e73dbc4c02bd5128cec0997c73af82 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Tue, 8 Nov 2022 22:58:27 +0100 +Subject: [PATCH 1/6] clk: qcom: krait-cc: use devm variant for clk notifier + register + +Use devm variant for clk notifier register and correctly handle free +resource on driver remove. + +Signed-off-by: Christian Marangi +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221108215827.30475-1-ansuelsmth@gmail.com +--- + drivers/clk/qcom/krait-cc.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -62,7 +62,7 @@ static int krait_notifier_register(struc + int ret = 0; + + mux->clk_nb.notifier_call = krait_notifier_cb; +- ret = clk_notifier_register(clk, &mux->clk_nb); ++ ret = devm_clk_notifier_register(dev, clk, &mux->clk_nb); + if (ret) + dev_err(dev, "failed to register clock notifier: %d\n", ret); + diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-02-clk-qcom-krait-cc-fix-wrong-parent-order-for-seconda.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-02-clk-qcom-krait-cc-fix-wrong-parent-order-for-seconda.patch new file mode 100644 index 0000000000..2dcb69399c --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/002-v6.2-02-clk-qcom-krait-cc-fix-wrong-parent-order-for-seconda.patch @@ -0,0 +1,46 @@ +From 8e456411abcbf899c04740b9dbb3dcefcd61c946 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 9 Nov 2022 01:56:27 +0100 +Subject: [PATCH 2/6] clk: qcom: krait-cc: fix wrong parent order for secondary + mux + +The secondary mux parent order is swapped. +This currently doesn't cause problems as the secondary mux is used for idle +clk and as a safe clk source while reprogramming the hfpll. + +Each mux have 2 or more output but he always have a safe source to +switch while reprogramming the connected pll. We use a clk notifier to +switch to the correct parent before clk core can apply the correct rate. +The parent to switch is hardcoded in the mux struct. + +For the secondary mux the safe source to use is the qsb parent as it's +the only fixed clk as the acpus_aux is a pll that can source from pxo or +from pll8. + +The hardcoded safe parent for the secondary mux is set to index 0 that +in the secondary mux map is set to 2. + +But the index 0 is actually acpu_aux in the parent list. + +Fix the swapped parents to correctly handle idle frequency and output a +sane clk_summary report. + +Signed-off-by: Christian Marangi +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221109005631.3189-1-ansuelsmth@gmail.com +--- + drivers/clk/qcom/krait-cc.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -116,8 +116,8 @@ krait_add_sec_mux(struct device *dev, in + int ret; + struct krait_mux_clk *mux; + static const char *sec_mux_list[] = { +- "acpu_aux", + "qsb", ++ "acpu_aux", + }; + struct clk_init_data init = { + .parent_names = sec_mux_list, diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-03-clk-qcom-krait-cc-also-enable-secondary-mux-and-div-.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-03-clk-qcom-krait-cc-also-enable-secondary-mux-and-div-.patch new file mode 100644 index 0000000000..6261a940d7 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/002-v6.2-03-clk-qcom-krait-cc-also-enable-secondary-mux-and-div-.patch @@ -0,0 +1,68 @@ +From 18ae57b1e8abee6c453381470f6e18991d2901a8 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 9 Nov 2022 01:56:28 +0100 +Subject: [PATCH 3/6] clk: qcom: krait-cc: also enable secondary mux and div + clk + +clk-krait ignore any rate change if clk is not flagged as enabled. +Correctly enable the secondary mux and div clk to correctly change rate +instead of silently ignoring the request. + +Signed-off-by: Christian Marangi +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221109005631.3189-2-ansuelsmth@gmail.com +--- + drivers/clk/qcom/krait-cc.c | 21 ++++++++++++++++++++- + 1 file changed, 20 insertions(+), 1 deletion(-) + +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -80,6 +80,7 @@ krait_add_div(struct device *dev, int id + }; + const char *p_names[1]; + struct clk *clk; ++ int cpu; + + div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); + if (!div) +@@ -103,6 +104,17 @@ krait_add_div(struct device *dev, int id + } + + clk = devm_clk_register(dev, &div->hw); ++ if (IS_ERR(clk)) ++ goto err; ++ ++ /* clk-krait ignore any rate change if mux is not flagged as enabled */ ++ if (id < 0) ++ for_each_online_cpu(cpu) ++ clk_prepare_enable(div->hw.clk); ++ else ++ clk_prepare_enable(div->hw.clk); ++ ++err: + kfree(p_names[0]); + kfree(init.name); + +@@ -113,7 +125,7 @@ static int + krait_add_sec_mux(struct device *dev, int id, const char *s, + unsigned int offset, bool unique_aux) + { +- int ret; ++ int cpu, ret; + struct krait_mux_clk *mux; + static const char *sec_mux_list[] = { + "qsb", +@@ -165,6 +177,13 @@ krait_add_sec_mux(struct device *dev, in + if (ret) + goto unique_aux; + ++ /* clk-krait ignore any rate change if mux is not flagged as enabled */ ++ if (id < 0) ++ for_each_online_cpu(cpu) ++ clk_prepare_enable(mux->hw.clk); ++ else ++ clk_prepare_enable(mux->hw.clk); ++ + unique_aux: + if (unique_aux) + kfree(sec_mux_list[0]); diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-04-clk-qcom-krait-cc-handle-secondary-mux-sourcing-out-.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-04-clk-qcom-krait-cc-handle-secondary-mux-sourcing-out-.patch new file mode 100644 index 0000000000..fabb299f42 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/002-v6.2-04-clk-qcom-krait-cc-handle-secondary-mux-sourcing-out-.patch @@ -0,0 +1,48 @@ +From e5dc1a4c01510da8438dddfdf4200b79d73990dc Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 9 Nov 2022 01:56:29 +0100 +Subject: [PATCH 4/6] clk: qcom: krait-cc: handle secondary mux sourcing out of + acpu_aux + +Some bootloader may leave the system in an even more undefined state +with the secondary mux of L2 or other cores sourcing out of the acpu_aux +parent. This results in the clk set to the PXO rate or a PLL8 rate. + +The current logic to reset the mux and set them to a defined state only +handle if the mux are configured to source out of QSB. Change this and +force a new and defined state if the current clk is lower than the aux +rate. This way we can handle any wrong configuration where the mux is +sourcing out of QSB (rate 225MHz, currently set to a virtual rate of 1), +PXO rate (rate 25MHz) or PLL8 (needs to be configured to run at 384Mhz). + +Signed-off-by: Christian Marangi +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221109005631.3189-3-ansuelsmth@gmail.com +--- + drivers/clk/qcom/krait-cc.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -383,8 +383,8 @@ static int krait_cc_probe(struct platfor + */ + cur_rate = clk_get_rate(l2_pri_mux_clk); + aux_rate = 384000000; +- if (cur_rate == 1) { +- pr_info("L2 @ QSB rate. Forcing new rate.\n"); ++ if (cur_rate < aux_rate) { ++ pr_info("L2 @ Undefined rate. Forcing new rate.\n"); + cur_rate = aux_rate; + } + clk_set_rate(l2_pri_mux_clk, aux_rate); +@@ -394,8 +394,8 @@ static int krait_cc_probe(struct platfor + for_each_possible_cpu(cpu) { + clk = clks[cpu]; + cur_rate = clk_get_rate(clk); +- if (cur_rate == 1) { +- pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu); ++ if (cur_rate < aux_rate) { ++ pr_info("CPU%d @ Undefined rate. Forcing new rate.\n", cpu); + cur_rate = aux_rate; + } + diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-05-clk-qcom-krait-cc-convert-to-devm_clk_hw_register.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-05-clk-qcom-krait-cc-convert-to-devm_clk_hw_register.patch new file mode 100644 index 0000000000..049b1fa49f --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/002-v6.2-05-clk-qcom-krait-cc-convert-to-devm_clk_hw_register.patch @@ -0,0 +1,104 @@ +From 8ea9fb841a7e528bc8ae79d726ce951dcf7b46e2 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 9 Nov 2022 01:56:30 +0100 +Subject: [PATCH 5/6] clk: qcom: krait-cc: convert to devm_clk_hw_register + +clk_register is now deprecated. Convert the driver to devm_clk_hw_register. + +Signed-off-by: Christian Marangi +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221109005631.3189-4-ansuelsmth@gmail.com +--- + drivers/clk/qcom/krait-cc.c | 31 +++++++++++++++++++------------ + 1 file changed, 19 insertions(+), 12 deletions(-) + +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -79,8 +79,7 @@ krait_add_div(struct device *dev, int id + .flags = CLK_SET_RATE_PARENT, + }; + const char *p_names[1]; +- struct clk *clk; +- int cpu; ++ int cpu, ret; + + div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); + if (!div) +@@ -103,8 +102,8 @@ krait_add_div(struct device *dev, int id + return -ENOMEM; + } + +- clk = devm_clk_register(dev, &div->hw); +- if (IS_ERR(clk)) ++ ret = devm_clk_hw_register(dev, &div->hw); ++ if (ret) + goto err; + + /* clk-krait ignore any rate change if mux is not flagged as enabled */ +@@ -118,7 +117,7 @@ err: + kfree(p_names[0]); + kfree(init.name); + +- return PTR_ERR_OR_ZERO(clk); ++ return ret; + } + + static int +@@ -137,7 +136,6 @@ krait_add_sec_mux(struct device *dev, in + .ops = &krait_mux_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; +- struct clk *clk; + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) +@@ -166,14 +164,16 @@ krait_add_sec_mux(struct device *dev, in + if (unique_aux) { + sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s); + if (!sec_mux_list[0]) { +- clk = ERR_PTR(-ENOMEM); ++ ret = -ENOMEM; + goto err_aux; + } + } + +- clk = devm_clk_register(dev, &mux->hw); ++ ret = devm_clk_hw_register(dev, &mux->hw); ++ if (ret) ++ goto unique_aux; + +- ret = krait_notifier_register(dev, clk, mux); ++ ret = krait_notifier_register(dev, mux->hw.clk, mux); + if (ret) + goto unique_aux; + +@@ -189,7 +189,7 @@ unique_aux: + kfree(sec_mux_list[0]); + err_aux: + kfree(init.name); +- return PTR_ERR_OR_ZERO(clk); ++ return ret; + } + + static struct clk * +@@ -241,11 +241,18 @@ krait_add_pri_mux(struct device *dev, in + goto err_p2; + } + +- clk = devm_clk_register(dev, &mux->hw); ++ ret = devm_clk_hw_register(dev, &mux->hw); ++ if (ret) { ++ clk = ERR_PTR(ret); ++ goto err_p3; ++ } ++ ++ clk = mux->hw.clk; + + ret = krait_notifier_register(dev, clk, mux); + if (ret) +- goto err_p3; ++ clk = ERR_PTR(ret); ++ + err_p3: + kfree(p_names[2]); + err_p2: diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-06-clk-qcom-krait-cc-convert-to-parent_data-API.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-06-clk-qcom-krait-cc-convert-to-parent_data-API.patch new file mode 100644 index 0000000000..453a37dfc0 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/002-v6.2-06-clk-qcom-krait-cc-convert-to-parent_data-API.patch @@ -0,0 +1,414 @@ +From 56a655e1c41a86445cf2de656649ad93424b2a63 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 9 Nov 2022 01:56:31 +0100 +Subject: [PATCH 6/6] clk: qcom: krait-cc: convert to parent_data API + +Modernize the krait-cc driver to parent-data API and refactor to drop +any use of parent_names. From Documentation all the required clocks should +be declared in DTS so fw_name can be correctly used to get the parents +for all the muxes. .name is also declared to save compatibility with old +DT. + +While at it also drop some hardcoded index and introduce an enum to make +index values more clear. + +Signed-off-by: Christian Marangi +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221109005631.3189-5-ansuelsmth@gmail.com +--- + drivers/clk/qcom/krait-cc.c | 202 ++++++++++++++++++++---------------- + 1 file changed, 112 insertions(+), 90 deletions(-) + +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -15,6 +15,16 @@ + + #include "clk-krait.h" + ++enum { ++ cpu0_mux = 0, ++ cpu1_mux, ++ cpu2_mux, ++ cpu3_mux, ++ l2_mux, ++ ++ clks_max, ++}; ++ + static unsigned int sec_mux_map[] = { + 2, + 0, +@@ -69,21 +79,23 @@ static int krait_notifier_register(struc + return ret; + } + +-static int ++static struct clk_hw * + krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) + { + struct krait_div2_clk *div; ++ static struct clk_parent_data p_data[1]; + struct clk_init_data init = { +- .num_parents = 1, ++ .num_parents = ARRAY_SIZE(p_data), + .ops = &krait_div2_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; +- const char *p_names[1]; ++ struct clk_hw *clk; ++ char *parent_name; + int cpu, ret; + + div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); + if (!div) +- return -ENOMEM; ++ return ERR_PTR(-ENOMEM); + + div->width = 2; + div->shift = 6; +@@ -93,18 +105,25 @@ krait_add_div(struct device *dev, int id + + init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s); + if (!init.name) +- return -ENOMEM; ++ return ERR_PTR(-ENOMEM); + +- init.parent_names = p_names; +- p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); +- if (!p_names[0]) { +- kfree(init.name); +- return -ENOMEM; ++ init.parent_data = p_data; ++ parent_name = kasprintf(GFP_KERNEL, "hfpll%s", s); ++ if (!parent_name) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_parent_name; + } + ++ p_data[0].fw_name = parent_name; ++ p_data[0].name = parent_name; ++ + ret = devm_clk_hw_register(dev, &div->hw); +- if (ret) +- goto err; ++ if (ret) { ++ clk = ERR_PTR(ret); ++ goto err_clk; ++ } ++ ++ clk = &div->hw; + + /* clk-krait ignore any rate change if mux is not flagged as enabled */ + if (id < 0) +@@ -113,33 +132,36 @@ krait_add_div(struct device *dev, int id + else + clk_prepare_enable(div->hw.clk); + +-err: +- kfree(p_names[0]); ++err_clk: ++ kfree(parent_name); ++err_parent_name: + kfree(init.name); + +- return ret; ++ return clk; + } + +-static int ++static struct clk_hw * + krait_add_sec_mux(struct device *dev, int id, const char *s, + unsigned int offset, bool unique_aux) + { + int cpu, ret; + struct krait_mux_clk *mux; +- static const char *sec_mux_list[] = { +- "qsb", +- "acpu_aux", ++ static struct clk_parent_data sec_mux_list[2] = { ++ { .name = "qsb", .fw_name = "qsb" }, ++ {}, + }; + struct clk_init_data init = { +- .parent_names = sec_mux_list, ++ .parent_data = sec_mux_list, + .num_parents = ARRAY_SIZE(sec_mux_list), + .ops = &krait_mux_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; ++ struct clk_hw *clk; ++ char *parent_name; + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) +- return -ENOMEM; ++ return ERR_PTR(-ENOMEM); + + mux->offset = offset; + mux->lpl = id >= 0; +@@ -159,23 +181,33 @@ krait_add_sec_mux(struct device *dev, in + + init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); + if (!init.name) +- return -ENOMEM; ++ return ERR_PTR(-ENOMEM); + + if (unique_aux) { +- sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s); +- if (!sec_mux_list[0]) { +- ret = -ENOMEM; ++ parent_name = kasprintf(GFP_KERNEL, "acpu%s_aux", s); ++ if (!parent_name) { ++ clk = ERR_PTR(-ENOMEM); + goto err_aux; + } ++ sec_mux_list[1].fw_name = parent_name; ++ sec_mux_list[1].name = parent_name; ++ } else { ++ sec_mux_list[1].name = "apu_aux"; + } + + ret = devm_clk_hw_register(dev, &mux->hw); +- if (ret) +- goto unique_aux; ++ if (ret) { ++ clk = ERR_PTR(ret); ++ goto err_clk; ++ } ++ ++ clk = &mux->hw; + + ret = krait_notifier_register(dev, mux->hw.clk, mux); +- if (ret) +- goto unique_aux; ++ if (ret) { ++ clk = ERR_PTR(ret); ++ goto err_clk; ++ } + + /* clk-krait ignore any rate change if mux is not flagged as enabled */ + if (id < 0) +@@ -184,28 +216,29 @@ krait_add_sec_mux(struct device *dev, in + else + clk_prepare_enable(mux->hw.clk); + +-unique_aux: ++err_clk: + if (unique_aux) +- kfree(sec_mux_list[0]); ++ kfree(parent_name); + err_aux: + kfree(init.name); +- return ret; ++ return clk; + } + +-static struct clk * +-krait_add_pri_mux(struct device *dev, int id, const char *s, +- unsigned int offset) ++static struct clk_hw * ++krait_add_pri_mux(struct device *dev, struct clk_hw *hfpll_div, struct clk_hw *sec_mux, ++ int id, const char *s, unsigned int offset) + { + int ret; + struct krait_mux_clk *mux; +- const char *p_names[3]; ++ static struct clk_parent_data p_data[3]; + struct clk_init_data init = { +- .parent_names = p_names, +- .num_parents = ARRAY_SIZE(p_names), ++ .parent_data = p_data, ++ .num_parents = ARRAY_SIZE(p_data), + .ops = &krait_mux_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; +- struct clk *clk; ++ struct clk_hw *clk; ++ char *hfpll_name; + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) +@@ -223,55 +256,44 @@ krait_add_pri_mux(struct device *dev, in + if (!init.name) + return ERR_PTR(-ENOMEM); + +- p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); +- if (!p_names[0]) { ++ hfpll_name = kasprintf(GFP_KERNEL, "hfpll%s", s); ++ if (!hfpll_name) { + clk = ERR_PTR(-ENOMEM); +- goto err_p0; ++ goto err_hfpll; + } + +- p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s); +- if (!p_names[1]) { +- clk = ERR_PTR(-ENOMEM); +- goto err_p1; +- } ++ p_data[0].fw_name = hfpll_name; ++ p_data[0].name = hfpll_name; + +- p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); +- if (!p_names[2]) { +- clk = ERR_PTR(-ENOMEM); +- goto err_p2; +- } ++ p_data[1].hw = hfpll_div; ++ p_data[2].hw = sec_mux; + + ret = devm_clk_hw_register(dev, &mux->hw); + if (ret) { + clk = ERR_PTR(ret); +- goto err_p3; ++ goto err_clk; + } + +- clk = mux->hw.clk; ++ clk = &mux->hw; + +- ret = krait_notifier_register(dev, clk, mux); ++ ret = krait_notifier_register(dev, mux->hw.clk, mux); + if (ret) + clk = ERR_PTR(ret); + +-err_p3: +- kfree(p_names[2]); +-err_p2: +- kfree(p_names[1]); +-err_p1: +- kfree(p_names[0]); +-err_p0: ++err_clk: ++ kfree(hfpll_name); ++err_hfpll: + kfree(init.name); + return clk; + } + + /* id < 0 for L2, otherwise id == physical CPU number */ +-static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux) ++static struct clk_hw *krait_add_clks(struct device *dev, int id, bool unique_aux) + { +- int ret; ++ struct clk_hw *hfpll_div, *sec_mux, *pri_mux; + unsigned int offset; + void *p = NULL; + const char *s; +- struct clk *clk; + + if (id >= 0) { + offset = 0x4501 + (0x1000 * id); +@@ -283,22 +305,23 @@ static struct clk *krait_add_clks(struct + s = "_l2"; + } + +- ret = krait_add_div(dev, id, s, offset); +- if (ret) { +- clk = ERR_PTR(ret); ++ hfpll_div = krait_add_div(dev, id, s, offset); ++ if (IS_ERR(hfpll_div)) { ++ pri_mux = hfpll_div; + goto err; + } + +- ret = krait_add_sec_mux(dev, id, s, offset, unique_aux); +- if (ret) { +- clk = ERR_PTR(ret); ++ sec_mux = krait_add_sec_mux(dev, id, s, offset, unique_aux); ++ if (IS_ERR(sec_mux)) { ++ pri_mux = sec_mux; + goto err; + } + +- clk = krait_add_pri_mux(dev, id, s, offset); ++ pri_mux = krait_add_pri_mux(dev, hfpll_div, sec_mux, id, s, offset); ++ + err: + kfree(p); +- return clk; ++ return pri_mux; + } + + static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data) +@@ -306,7 +329,7 @@ static struct clk *krait_of_get(struct o + unsigned int idx = clkspec->args[0]; + struct clk **clks = data; + +- if (idx >= 5) { ++ if (idx >= clks_max) { + pr_err("%s: invalid clock index %d\n", __func__, idx); + return ERR_PTR(-EINVAL); + } +@@ -327,9 +350,8 @@ static int krait_cc_probe(struct platfor + const struct of_device_id *id; + unsigned long cur_rate, aux_rate; + int cpu; +- struct clk *clk; +- struct clk **clks; +- struct clk *l2_pri_mux_clk; ++ struct clk_hw *mux, *l2_pri_mux; ++ struct clk *clk, **clks; + + id = of_match_device(krait_cc_match_table, dev); + if (!id) +@@ -348,21 +370,21 @@ static int krait_cc_probe(struct platfor + } + + /* Krait configurations have at most 4 CPUs and one L2 */ +- clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL); ++ clks = devm_kcalloc(dev, clks_max, sizeof(*clks), GFP_KERNEL); + if (!clks) + return -ENOMEM; + + for_each_possible_cpu(cpu) { +- clk = krait_add_clks(dev, cpu, id->data); ++ mux = krait_add_clks(dev, cpu, id->data); + if (IS_ERR(clk)) + return PTR_ERR(clk); +- clks[cpu] = clk; ++ clks[cpu] = mux->clk; + } + +- l2_pri_mux_clk = krait_add_clks(dev, -1, id->data); +- if (IS_ERR(l2_pri_mux_clk)) +- return PTR_ERR(l2_pri_mux_clk); +- clks[4] = l2_pri_mux_clk; ++ l2_pri_mux = krait_add_clks(dev, -1, id->data); ++ if (IS_ERR(l2_pri_mux)) ++ return PTR_ERR(l2_pri_mux); ++ clks[l2_mux] = l2_pri_mux->clk; + + /* + * We don't want the CPU or L2 clocks to be turned off at late init +@@ -372,7 +394,7 @@ static int krait_cc_probe(struct platfor + * they take over. + */ + for_each_online_cpu(cpu) { +- clk_prepare_enable(l2_pri_mux_clk); ++ clk_prepare_enable(clks[l2_mux]); + WARN(clk_prepare_enable(clks[cpu]), + "Unable to turn on CPU%d clock", cpu); + } +@@ -388,16 +410,16 @@ static int krait_cc_probe(struct platfor + * two different rates to force a HFPLL reinit under all + * circumstances. + */ +- cur_rate = clk_get_rate(l2_pri_mux_clk); ++ cur_rate = clk_get_rate(clks[l2_mux]); + aux_rate = 384000000; + if (cur_rate < aux_rate) { + pr_info("L2 @ Undefined rate. Forcing new rate.\n"); + cur_rate = aux_rate; + } +- clk_set_rate(l2_pri_mux_clk, aux_rate); +- clk_set_rate(l2_pri_mux_clk, 2); +- clk_set_rate(l2_pri_mux_clk, cur_rate); +- pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000); ++ clk_set_rate(clks[l2_mux], aux_rate); ++ clk_set_rate(clks[l2_mux], 2); ++ clk_set_rate(clks[l2_mux], cur_rate); ++ pr_info("L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000); + for_each_possible_cpu(cpu) { + clk = clks[cpu]; + cur_rate = clk_get_rate(clk); diff --git a/target/linux/ipq806x/patches-6.1/003-v6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch b/target/linux/ipq806x/patches-6.1/003-v6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch new file mode 100644 index 0000000000..7e65f4cdff --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/003-v6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch @@ -0,0 +1,28 @@ +From c9713e4ede1e5d044b64fe4d3cbb84223625637f Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Tue, 25 Oct 2022 01:38:17 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq8064: disable mmc-ddr-1_8v for sdcc1 + +It was reported non working mmc with this option enabled. +Both mmc for ipq8064 are supplied by a fixed 3.3v regulator so mmc can't +be run at 1.8v. +Disable it to restore correct functionality of this SoC feature. + +Tested-by: Hendrik Koerner +Signed-off-by: Christian Marangi +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221024233817.27410-1-ansuelsmth@gmail.com +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 - + 1 file changed, 1 deletion(-) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -756,7 +756,6 @@ + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; +- mmc-ddr-1_8v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; diff --git a/target/linux/ipq806x/patches-6.1/004-v6.2-01-thermal-drivers-qcom-tsens-Init-debugfs-only-with-su.patch b/target/linux/ipq806x/patches-6.1/004-v6.2-01-thermal-drivers-qcom-tsens-Init-debugfs-only-with-su.patch new file mode 100644 index 0000000000..76df0f5681 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/004-v6.2-01-thermal-drivers-qcom-tsens-Init-debugfs-only-with-su.patch @@ -0,0 +1,42 @@ +From de48d8766afcd97d147699aaff78a338081c9973 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Sat, 22 Oct 2022 14:56:55 +0200 +Subject: [PATCH 1/3] thermal/drivers/qcom/tsens: Init debugfs only with + successful probe + +Calibrate and tsens_register can fail or PROBE_DEFER. This will cause a +double or a wrong init of the debugfs information. Init debugfs only +with successful probe fixing warning about directory already present. + +Signed-off-by: Christian Marangi +Acked-by: Thara Gopinath +Link: https://lore.kernel.org/r/20221022125657.22530-2-ansuelsmth@gmail.com +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/qcom/tsens.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -918,8 +918,6 @@ int __init init_common(struct tsens_priv + if (tsens_version(priv) >= VER_0_1) + tsens_enable_irq(priv); + +- tsens_debug_init(op); +- + err_put_device: + put_device(&op->dev); + return ret; +@@ -1156,7 +1154,11 @@ static int tsens_probe(struct platform_d + } + } + +- return tsens_register(priv); ++ ret = tsens_register(priv); ++ if (!ret) ++ tsens_debug_init(pdev); ++ ++ return ret; + } + + static int tsens_remove(struct platform_device *pdev) diff --git a/target/linux/ipq806x/patches-6.1/004-v6.2-02-thermal-drivers-qcom-tsens-Fix-wrong-version-id-dbg_.patch b/target/linux/ipq806x/patches-6.1/004-v6.2-02-thermal-drivers-qcom-tsens-Fix-wrong-version-id-dbg_.patch new file mode 100644 index 0000000000..10f1e36b58 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/004-v6.2-02-thermal-drivers-qcom-tsens-Fix-wrong-version-id-dbg_.patch @@ -0,0 +1,29 @@ +From c7e077e921fa94e0c06c8d14af6c0504c8a5f4bd Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Sat, 22 Oct 2022 14:56:56 +0200 +Subject: [PATCH 2/3] thermal/drivers/qcom/tsens: Fix wrong version id + dbg_version_show + +For VER_0 the version was incorrectly reported as 0.1.0. + +Fix that and correctly report the major version for this old tsens +revision. + +Signed-off-by: Christian Marangi +Link: https://lore.kernel.org/r/20221022125657.22530-3-ansuelsmth@gmail.com +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/qcom/tsens.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -692,7 +692,7 @@ static int dbg_version_show(struct seq_f + return ret; + seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver); + } else { +- seq_puts(s, "0.1.0\n"); ++ seq_printf(s, "0.%d.0\n", priv->feat->ver_major); + } + + return 0; diff --git a/target/linux/ipq806x/patches-6.1/004-v6.2-03-thermal-drivers-qcom-tsens-Rework-debugfs-file-struc.patch b/target/linux/ipq806x/patches-6.1/004-v6.2-03-thermal-drivers-qcom-tsens-Rework-debugfs-file-struc.patch new file mode 100644 index 0000000000..63cce7974b --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/004-v6.2-03-thermal-drivers-qcom-tsens-Rework-debugfs-file-struc.patch @@ -0,0 +1,54 @@ +From 89992d95ed1046338c7866ef7bbe6de543a2af91 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Sat, 22 Oct 2022 14:56:57 +0200 +Subject: [PATCH 3/3] thermal/drivers/qcom/tsens: Rework debugfs file structure + +The current tsens debugfs structure is composed by: +- a tsens dir in debugfs with a version file +- a directory for each tsens istance with sensors file to dump all the + sensors value. + +This works on the assumption that we have the same version for each +istance but this assumption seems fragile and with more than one tsens +istance results in the version file not tracking each of them. + +A better approach is to just create a subdirectory for each tsens +istance and put there version and sensors debugfs file. + +Using this new implementation results in less code since debugfs entry +are created only on successful tsens probe. + +Signed-off-by: Christian Marangi +Link: https://lore.kernel.org/r/20221022125657.22530-4-ansuelsmth@gmail.com +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/qcom/tsens.c | 13 +++---------- + 1 file changed, 3 insertions(+), 10 deletions(-) + +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -704,21 +704,14 @@ DEFINE_SHOW_ATTRIBUTE(dbg_sensors); + static void tsens_debug_init(struct platform_device *pdev) + { + struct tsens_priv *priv = platform_get_drvdata(pdev); +- struct dentry *root, *file; + +- root = debugfs_lookup("tsens", NULL); +- if (!root) ++ priv->debug_root = debugfs_lookup("tsens", NULL); ++ if (!priv->debug_root) + priv->debug_root = debugfs_create_dir("tsens", NULL); +- else +- priv->debug_root = root; +- +- file = debugfs_lookup("version", priv->debug_root); +- if (!file) +- debugfs_create_file("version", 0444, priv->debug_root, +- pdev, &dbg_version_fops); + + /* A directory for each instance of the TSENS IP */ + priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root); ++ debugfs_create_file("version", 0444, priv->debug, pdev, &dbg_version_fops); + debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops); + } + #else diff --git a/target/linux/ipq806x/patches-6.1/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch b/target/linux/ipq806x/patches-6.1/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch new file mode 100644 index 0000000000..e0c195f1ab --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch @@ -0,0 +1,25 @@ +From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 09:31:44 +0100 +Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting + +Signed-off-by: John Crispin +--- + drivers/mtd/mtdpart.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/mtd/mtdpart.c ++++ b/drivers/mtd/mtdpart.c +@@ -51,7 +51,11 @@ static struct mtd_info *allocate_partiti + + /* allocate the partition structure */ + child = kzalloc(sizeof(*child), GFP_KERNEL); +- name = kstrdup(part->name, GFP_KERNEL); ++ /* "rootfs" conflicts with OpenWrt auto mounting */ ++ if (mtd_type_is_nand(parent) && !strcmp(part->name, "rootfs")) ++ name = "ubi"; ++ else ++ name = kstrdup(part->name, GFP_KERNEL); + if (!name || !child) { + printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n", + parent->name); diff --git a/target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch b/target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch new file mode 100644 index 0000000000..0a594b2688 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch @@ -0,0 +1,89 @@ +From bef5018abb7cf94efafdc05087b4c998891ae4ec Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Mon, 17 Jan 2022 23:39:34 +0100 +Subject: [PATCH v3 10/18] ARM: dts: qcom: add saw for l2 cache and kraitcc for + ipq8064 + +Add saw compatible for l2 cache and kraitcc node for ipq8064 dtsi. +Also declare clock-output-names for acc0 and acc1 and qsb fixed clock +for the secondary mux. + +Signed-off-by: Ansuel Smith +Tested-by: Jonathan McDowell +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 34 +++++++++++++++++++++++++++-- + 1 file changed, 32 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -301,6 +301,12 @@ + }; + + clocks { ++ qsb: qsb { ++ compatible = "fixed-clock"; ++ clock-frequency = <225000000>; ++ #clock-cells = <0>; ++ }; ++ + cxo_board: cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; +@@ -575,15 +581,30 @@ + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu_l2_aux"; ++ #clock-cells = <0>; ++ }; ++ ++ kraitcc: clock-controller { ++ compatible = "qcom,krait-cc-v1"; ++ clocks = <&gcc PLL9>, <&gcc PLL10>, <&gcc PLL12>, ++ <&acc0>, <&acc1>, <&l2cc>, <&qsb>, <&pxo_board>; ++ clock-names = "hfpll0", "hfpll1", "hfpll_l2", ++ "acpu0_aux", "acpu1_aux", "acpu_l2_aux", ++ "qsb", "pxo"; ++ #clock-cells = <1>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; ++ clock-output-names = "acpu0_aux"; ++ clocks = <&gcc PLL8_VOTE>, <&pxo_board>; ++ clock-names = "pll8_vote", "pxo"; ++ #clock-cells = <0>; + }; + + saw0: regulator@2089000 { +- compatible = "qcom,saw2"; ++ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; +@@ -591,14 +612,24 @@ + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; ++ clock-output-names = "acpu1_aux"; ++ clocks = <&gcc PLL8_VOTE>, <&pxo_board>; ++ clock-names = "pll8_vote", "pxo"; ++ #clock-cells = <0>; + }; + + saw1: regulator@2099000 { +- compatible = "qcom,saw2"; ++ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + ++ saw_l2: regulator@02012000 { ++ compatible = "qcom,saw2", "syscon"; ++ reg = <0x02012000 0x1000>; ++ regulator; ++ }; ++ + nss_common: syscon@03000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; diff --git a/target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch b/target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch new file mode 100644 index 0000000000..16e924b303 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch @@ -0,0 +1,268 @@ +From 076ebb6e1799c4c7a1d2e07510d88b9e9b57b551 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Tue, 18 Jan 2022 00:03:47 +0100 +Subject: [PATCH v3 13/18] ARM: dts: qcom: add opp table for cpu and l2 for + ipq8064 + +Add opp table for cpu and l2 cache. While the current cpufreq is +the generic one that doesn't scale the L2 cache, we add the l2 +cache opp anyway for the sake of completeness. This will be handy in the +future when a dedicated cpufreq driver is introduced for krait cores +that will correctly scale l2 cache with the core freq. + +Opp-level is set based on the logic of +0: idle level +1: normal level +2: turbo level + +Signed-off-by: Ansuel Smith +Tested-by: Jonathan McDowell +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 99 +++++++++++++++++++++++++++++ + 1 file changed, 99 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -48,6 +48,105 @@ + }; + }; + ++ opp_table_l2: opp_table_l2 { ++ compatible = "operating-points-v2"; ++ ++ opp-384000000 { ++ opp-hz = /bits/ 64 <384000000>; ++ opp-microvolt = <1100000>; ++ clock-latency-ns = <100000>; ++ opp-level = <0>; ++ }; ++ ++ opp-1000000000 { ++ opp-hz = /bits/ 64 <1000000000>; ++ opp-microvolt = <1100000>; ++ clock-latency-ns = <100000>; ++ opp-level = <1>; ++ }; ++ ++ opp-1200000000 { ++ opp-hz = /bits/ 64 <1200000000>; ++ opp-microvolt = <1150000>; ++ clock-latency-ns = <100000>; ++ opp-level = <2>; ++ }; ++ }; ++ ++ opp_table0: opp_table0 { ++ compatible = "operating-points-v2-kryo-cpu"; ++ nvmem-cells = <&speedbin_efuse>; ++ ++ /* ++ * Voltage thresholds are ++ */ ++ opp-384000000 { ++ opp-hz = /bits/ 64 <384000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>; ++ opp-microvolt-speed0-pvs1-v0 = <925000 878750 971250>; ++ opp-microvolt-speed0-pvs2-v0 = <875000 831250 918750>; ++ opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <0>; ++ }; ++ ++ opp-600000000 { ++ opp-hz = /bits/ 64 <600000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>; ++ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>; ++ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>; ++ opp-microvolt-speed0-pvs3-v0 = <850000 807500 892500>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <1>; ++ }; ++ ++ opp-800000000 { ++ opp-hz = /bits/ 64 <800000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>; ++ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>; ++ opp-microvolt-speed0-pvs2-v0 = <995000 945250 1044750>; ++ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <1>; ++ }; ++ ++ opp-1000000000 { ++ opp-hz = /bits/ 64 <1000000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>; ++ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>; ++ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>; ++ opp-microvolt-speed0-pvs3-v0 = <950000 902500 997500>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <1>; ++ }; ++ ++ opp-1200000000 { ++ opp-hz = /bits/ 64 <1200000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1200000 1140000 1260000>; ++ opp-microvolt-speed0-pvs1-v0 = <1125000 1068750 1181250>; ++ opp-microvolt-speed0-pvs2-v0 = <1075000 1021250 1128750>; ++ opp-microvolt-speed0-pvs3-v0 = <1000000 950000 1050000>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <2>; ++ }; ++ ++ opp-1400000000 { ++ opp-hz = /bits/ 64 <1400000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1250000 1187500 1312500>; ++ opp-microvolt-speed0-pvs1-v0 = <1175000 1116250 1233750>; ++ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>; ++ opp-microvolt-speed0-pvs3-v0 = <1050000 997500 1102500>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <2>; ++ }; ++ }; ++ + thermal-zones { + sensor0-thermal { + polling-delay-passive = <0>; +--- a/arch/arm/boot/dts/qcom-ipq8065.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi +@@ -6,3 +6,92 @@ + model = "Qualcomm Technologies, Inc. IPQ8065"; + compatible = "qcom,ipq8065", "qcom,ipq8064"; + }; ++ ++&opp_table_l2 { ++ /delete-node/opp-1200000000; ++ ++ opp-1400000000 { ++ opp-hz = /bits/ 64 <1400000000>; ++ opp-microvolt = <1150000>; ++ clock-latency-ns = <100000>; ++ opp-level = <2>; ++ }; ++}; ++ ++&opp_table0 { ++ /* ++ * On ipq8065 1.2 ghz freq is not present ++ * Remove it to make cpufreq work and not ++ * complain for missing definition ++ */ ++ ++ /delete-node/opp-1200000000; ++ ++ /* ++ * Voltage thresholds are ++ */ ++ opp-384000000 { ++ opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>; ++ opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>; ++ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>; ++ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>; ++ opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>; ++ opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>; ++ opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>; ++ }; ++ ++ opp-600000000 { ++ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>; ++ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>; ++ opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>; ++ opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>; ++ opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>; ++ opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>; ++ opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>; ++ }; ++ ++ opp-800000000 { ++ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>; ++ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>; ++ opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>; ++ opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>; ++ opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>; ++ opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>; ++ opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>; ++ }; ++ ++ opp-1000000000 { ++ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>; ++ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>; ++ opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>; ++ opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>; ++ opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>; ++ opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>; ++ opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>; ++ }; ++ ++ opp-1400000000 { ++ opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>; ++ opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>; ++ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>; ++ opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>; ++ opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>; ++ opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>; ++ opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>; ++ opp-level = <1>; ++ }; ++ ++ opp-1725000000 { ++ opp-hz = /bits/ 64 <1725000000>; ++ opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>; ++ opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>; ++ opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>; ++ opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>; ++ opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>; ++ opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>; ++ opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <100000>; ++ opp-level = <2>; ++ }; ++}; +--- a/arch/arm/boot/dts/qcom-ipq8062.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi +@@ -6,3 +6,39 @@ + model = "Qualcomm Technologies, Inc. IPQ8062"; + compatible = "qcom,ipq8062", "qcom,ipq8064"; + }; ++ ++&opp_table0 { ++ /delete-node/opp-1200000000; ++ /delete-node/opp-1400000000; ++ ++ /* ++ * Voltage thresholds are ++ */ ++ opp-384000000 { ++ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>; ++ opp-microvolt-speed0-pvs1-v0 = < 925000 878750 971250>; ++ opp-microvolt-speed0-pvs2-v0 = < 875000 831250 918750>; ++ opp-microvolt-speed0-pvs3-v0 = < 800000 760000 840000>; ++ }; ++ ++ opp-600000000 { ++ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>; ++ opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>; ++ opp-microvolt-speed0-pvs2-v0 = < 925000 878750 971250>; ++ opp-microvolt-speed0-pvs3-v0 = < 850000 807500 892500>; ++ }; ++ ++ opp-800000000 { ++ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>; ++ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>; ++ opp-microvolt-speed0-pvs2-v0 = < 995000 945250 1044750>; ++ opp-microvolt-speed0-pvs3-v0 = < 900000 855000 945000>; ++ }; ++ ++ opp-1000000000 { ++ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>; ++ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>; ++ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>; ++ opp-microvolt-speed0-pvs3-v0 = < 950000 902500 997500>; ++ }; ++}; diff --git a/target/linux/ipq806x/patches-6.1/107-15-ARM-dts-qcom-add-multiple-missing-binding-for-cpu.patch b/target/linux/ipq806x/patches-6.1/107-15-ARM-dts-qcom-add-multiple-missing-binding-for-cpu.patch new file mode 100644 index 0000000000..cf27aaa08b --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/107-15-ARM-dts-qcom-add-multiple-missing-binding-for-cpu.patch @@ -0,0 +1,153 @@ +From 211fc0c0a63c99b68663a27182e643316c2d8cbe Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Tue, 18 Jan 2022 00:07:57 +0100 +Subject: [PATCH v3 15/18] ARM: dts: qcom: add multiple missing binding for cpu + and l2 for ipq8064 + +Add multiple binding for cpu node, l2 node and add idle-states +definition for ipq8064 dtsi. + +Signed-off-by: Ansuel Smith +Tested-by: Jonathan McDowell +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 36 +++++++++++++++++++++++++++++ + 1 file changed, 36 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -30,6 +30,15 @@ + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; ++ clocks = <&kraitcc 0>, <&kraitcc 4>; ++ clock-names = "cpu", "l2"; ++ clock-latency = <100000>; ++ operating-points-v2 = <&opp_table0>; ++ voltage-tolerance = <5>; ++ cooling-min-state = <0>; ++ cooling-max-state = <10>; ++ #cooling-cells = <2>; ++ cpu-idle-states = <&CPU_SPC>; + }; + + cpu1: cpu@1 { +@@ -40,11 +49,35 @@ + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; ++ clocks = <&kraitcc 1>, <&kraitcc 4>; ++ clock-names = "cpu", "l2"; ++ clock-latency = <100000>; ++ operating-points-v2 = <&opp_table0>; ++ voltage-tolerance = <5>; ++ cooling-min-state = <0>; ++ cooling-max-state = <10>; ++ #cooling-cells = <2>; ++ cpu-idle-states = <&CPU_SPC>; ++ }; ++ ++ idle-states { ++ CPU_SPC: spc { ++ compatible = "qcom,idle-state-spc"; ++ status = "disabled"; ++ entry-latency-us = <400>; ++ exit-latency-us = <900>; ++ min-residency-us = <3000>; ++ }; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; ++ qcom,saw = <&saw_l2>; ++ ++ clocks = <&kraitcc 4>; ++ clock-names = "l2"; ++ operating-points-v2 = <&opp_table_l2>; + }; + }; + +--- a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi +@@ -2,6 +2,18 @@ + + #include "qcom-ipq8064.dtsi" + ++&cpu0 { ++ cpu-supply = <&smb208_s2a>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&smb208_s2b>; ++}; ++ ++&L2 { ++ l2-supply = <&smb208_s1a>; ++}; ++ + &rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; +--- a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi +@@ -2,6 +2,18 @@ + + #include "qcom-ipq8064-v2.0.dtsi" + ++&cpu0 { ++ cpu-supply = <&smb208_s2a>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&smb208_s2b>; ++}; ++ ++&L2 { ++ l2-supply = <&smb208_s1a>; ++}; ++ + &rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; +--- a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi +@@ -2,6 +2,18 @@ + + #include "qcom-ipq8062.dtsi" + ++&cpu0 { ++ cpu-supply = <&smb208_s2a>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&smb208_s2b>; ++}; ++ ++&L2 { ++ l2-supply = <&smb208_s1a>; ++}; ++ + &rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; +--- a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi +@@ -2,6 +2,18 @@ + + #include "qcom-ipq8065.dtsi" + ++&cpu0 { ++ cpu-supply = <&smb208_s2a>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&smb208_s2b>; ++}; ++ ++&L2 { ++ l2-supply = <&smb208_s1a>; ++}; ++ + &rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; diff --git a/target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch b/target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch new file mode 100644 index 0000000000..6be9334e7d --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch @@ -0,0 +1,29 @@ +From 6c94e0184e56f9e9f1f5d5f54b20758433e498d2 Mon Sep 17 00:00:00 2001 +From: Christian 'Ansuel' Marangi +Date: Wed, 15 Jun 2022 16:47:09 +0200 +Subject: [PATCH 1/2] ARM: dts: qcom: fix wrong nad_pins definition for ipq806x + +Fix wrong nand_pings definition for bias-disable pins. + +Signed-off-by: Christian 'Ansuel' Marangi +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 7 ++----- + 1 file changed, 2 insertions(+), 5 deletions(-) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -599,12 +599,9 @@ + }; + + nand_pins: nand_pins { +- mux { ++ disable { + pins = "gpio34", "gpio35", "gpio36", +- "gpio37", "gpio38", "gpio39", +- "gpio40", "gpio41", "gpio42", +- "gpio43", "gpio44", "gpio45", +- "gpio46", "gpio47"; ++ "gpio37", "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; diff --git a/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch b/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch new file mode 100644 index 0000000000..a35bb3874f --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch @@ -0,0 +1,188 @@ +From 504188183408fac0f61b59f5ed8ea1773fe43669 Mon Sep 17 00:00:00 2001 +From: Christian 'Ansuel' Marangi +Date: Wed, 15 Jun 2022 16:59:30 +0200 +Subject: [PATCH 2/2] ARM: dts: qcom: add MDIO dedicated controller node for + ipq806x + +Add MDIO dedicated controller attached to gmac0 and fix rb3011 dts to +correctly use the new tag. + +Signed-off-by: Christian 'Ansuel' Marangi +--- + arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 134 +++++++++++----------- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++ + 2 files changed, 81 insertions(+), 67 deletions(-) + +--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +@@ -25,73 +25,6 @@ + device_type = "memory"; + }; + +- mdio0: mdio-0 { +- status = "okay"; +- compatible = "virtual,mdio-gpio"; +- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, +- <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; +- #address-cells = <1>; +- #size-cells = <0>; +- +- pinctrl-0 = <&mdio0_pins>; +- pinctrl-names = "default"; +- +- switch0: switch@10 { +- compatible = "qca,qca8337"; +- #address-cells = <1>; +- #size-cells = <0>; +- +- dsa,member = <0 0>; +- +- pinctrl-0 = <&sw0_reset_pin>; +- pinctrl-names = "default"; +- +- reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; +- reg = <0x10>; +- +- ports { +- #address-cells = <1>; +- #size-cells = <0>; +- +- switch0cpu: port@0 { +- reg = <0>; +- label = "cpu"; +- ethernet = <&gmac0>; +- phy-mode = "rgmii-id"; +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; +- }; +- +- port@1 { +- reg = <1>; +- label = "sw1"; +- }; +- +- port@2 { +- reg = <2>; +- label = "sw2"; +- }; +- +- port@3 { +- reg = <3>; +- label = "sw3"; +- }; +- +- port@4 { +- reg = <4>; +- label = "sw4"; +- }; +- +- port@5 { +- reg = <5>; +- label = "sw5"; +- }; +- }; +- }; +- }; +- + mdio1: mdio-1 { + status = "okay"; + compatible = "virtual,mdio-gpio"; +@@ -222,6 +155,73 @@ + status = "okay"; + }; + ++&mdio0 { ++ status = "okay"; ++ compatible = "virtual,mdio-gpio"; ++ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, ++ <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pinctrl-0 = <&mdio0_pins>; ++ pinctrl-names = "default"; ++ ++ switch0: switch@10 { ++ compatible = "qca,qca8337"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ dsa,member = <0 0>; ++ ++ pinctrl-0 = <&sw0_reset_pin>; ++ pinctrl-names = "default"; ++ ++ reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; ++ reg = <0x10>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ switch0cpu: port@0 { ++ reg = <0>; ++ label = "cpu"; ++ ethernet = <&gmac0>; ++ phy-mode = "rgmii-id"; ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "sw1"; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "sw2"; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "sw3"; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "sw4"; ++ }; ++ ++ port@5 { ++ reg = <5>; ++ label = "sw5"; ++ }; ++ }; ++ }; ++}; ++ + &gmac0 { + status = "okay"; + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -476,6 +476,20 @@ + snps,blen = <16 0 0 0 0 0 0>; + }; + ++ mdio0: mdio@37000000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ compatible = "qcom,ipq8064-mdio", "syscon"; ++ reg = <0x37000000 0x200000>; ++ resets = <&gcc GMAC_CORE1_RESET>; ++ reset-names = "stmmaceth"; ++ clocks = <&gcc GMAC_CORE1_CLK>; ++ clock-names = "stmmaceth"; ++ ++ status = "disabled"; ++ }; ++ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; diff --git a/target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch b/target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch new file mode 100644 index 0000000000..9de7328879 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch @@ -0,0 +1,235 @@ +From b044ae89862132a86fb511648e9c52ea3cdf8c30 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 5 Aug 2020 14:19:23 +0200 +Subject: [PATCH 1/4] devfreq: qcom: Add L2 Krait Cache devfreq scaling driver + +Qcom L2 Krait CPUs use the generic cpufreq-dt driver and doesn't actually +scale the Cache frequency when the CPU frequency is changed. This +devfreq driver register with the cpu notifier and scale the Cache +based on the max Freq across all core as the CPU cache is shared across +all of them. If provided this also scale the voltage of the regulator +attached to the CPU cache. The scaling logic is based on the CPU freq +and the 3 scaling interval are set by the device dts. + +Signed-off-by: Christian Marangi +--- + drivers/devfreq/Kconfig | 11 ++ + drivers/devfreq/Makefile | 1 + + drivers/devfreq/krait-cache-devfreq.c | 188 ++++++++++++++++++++++++++ + 3 files changed, 200 insertions(+) + create mode 100644 drivers/devfreq/krait-cache-devfreq.c + +--- a/drivers/devfreq/Kconfig ++++ b/drivers/devfreq/Kconfig +@@ -151,6 +151,17 @@ config ARM_SUN8I_A33_MBUS_DEVFREQ + This adds the DEVFREQ driver for the MBUS controller in some + Allwinner sun8i (A33 through H3) and sun50i (A64 and H5) SoCs. + ++config ARM_KRAIT_CACHE_DEVFREQ ++ tristate "Scaling support for Krait CPU Cache Devfreq" ++ depends on ARCH_QCOM || COMPILE_TEST ++ select DEVFREQ_GOV_PASSIVE ++ help ++ This adds the DEVFREQ driver for the Krait CPU L2 Cache shared by all cores. ++ ++ The driver register with the cpufreq notifier and find the right frequency ++ based on the max frequency across all core and the range set in the device ++ dts. If provided this scale also the regulator attached to the l2 cache. ++ + source "drivers/devfreq/event/Kconfig" + + endif # PM_DEVFREQ +--- a/drivers/devfreq/Makefile ++++ b/drivers/devfreq/Makefile +@@ -15,6 +15,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ) + + obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o + obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o + obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o ++obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o + + # DEVFREQ Event Drivers + obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/ +--- /dev/null ++++ b/drivers/devfreq/krait-cache-devfreq.c +@@ -0,0 +1,181 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "governor.h" ++ ++struct krait_cache_data { ++ struct clk *clk; ++ unsigned long idle_freq; ++ int token; ++}; ++ ++static int krait_cache_config_clk(struct device *dev, struct opp_table *opp_table, ++ struct dev_pm_opp *old_opp, struct dev_pm_opp *opp, ++ void *data, bool scaling_down) ++{ ++ struct krait_cache_data *kdata; ++ unsigned long old_freq, freq; ++ unsigned long idle_freq; ++ struct clk *clk; ++ int ret; ++ ++ kdata = dev_get_drvdata(dev); ++ idle_freq = kdata->idle_freq; ++ clk = kdata->clk; ++ ++ old_freq = dev_pm_opp_get_freq(old_opp); ++ freq = dev_pm_opp_get_freq(opp); ++ ++ /* ++ * Set to idle bin if switching from normal to high bin ++ * or vice versa. It has been notice that a bug is triggered ++ * in cache scaling when more than one bin is scaled, to fix ++ * this we first need to transition to the base rate and then ++ * to target rate ++ */ ++ if (likely(freq != idle_freq && old_freq != idle_freq)) { ++ ret = clk_set_rate(clk, idle_freq); ++ if (ret) ++ return ret; ++ } ++ ++ return clk_set_rate(clk, freq); ++}; ++ ++static int krait_cache_get_cur_freq(struct device *dev, unsigned long *freq) ++{ ++ struct krait_cache_data *data = dev_get_drvdata(dev); ++ ++ *freq = clk_get_rate(data->clk); ++ ++ return 0; ++}; ++ ++static int krait_cache_target(struct device *dev, unsigned long *freq, ++ u32 flags) ++{ ++ struct dev_pm_opp *opp; ++ ++ opp = dev_pm_opp_find_freq_ceil(dev, freq); ++ if (unlikely(IS_ERR(opp))) ++ return PTR_ERR(opp); ++ ++ dev_pm_opp_put(opp); ++ ++ return dev_pm_opp_set_rate(dev, *freq); ++}; ++ ++static int krait_cache_get_dev_status(struct device *dev, ++ struct devfreq_dev_status *stat) ++{ ++ struct krait_cache_data *data = dev_get_drvdata(dev); ++ ++ stat->busy_time = 0; ++ stat->total_time = 0; ++ stat->current_frequency = clk_get_rate(data->clk); ++ ++ return 0; ++}; ++ ++static struct devfreq_dev_profile krait_cache_devfreq_profile = { ++ .target = krait_cache_target, ++ .get_dev_status = krait_cache_get_dev_status, ++ .get_cur_freq = krait_cache_get_cur_freq ++}; ++ ++static struct devfreq_passive_data devfreq_gov_data = { ++ .parent_type = CPUFREQ_PARENT_DEV, ++}; ++ ++static int krait_cache_probe(struct platform_device *pdev) ++{ ++ struct dev_pm_opp_config config = { }; ++ struct device *dev = &pdev->dev; ++ struct krait_cache_data *data; ++ struct devfreq *devfreq; ++ struct dev_pm_opp *opp; ++ struct clk *clk; ++ int ret, token; ++ ++ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); ++ if (!data) ++ return -ENOMEM; ++ ++ clk = devm_clk_get(dev, "l2"); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ ++ config.regulator_names = (const char *[]){ "l2", NULL }; ++ config.clk_names = (const char *[]){ "l2", NULL }; ++ config.config_clks = krait_cache_config_clk; ++ ++ token = dev_pm_opp_set_config(dev, &config); ++ if (token < 0) ++ return token; ++ ++ ret = devm_pm_opp_of_add_table(dev); ++ if (ret) ++ goto free_opp; ++ ++ opp = dev_pm_opp_find_freq_ceil(dev, &data->idle_freq); ++ if (IS_ERR(opp)) { ++ ret = PTR_ERR(opp); ++ goto free_opp; ++ } ++ dev_pm_opp_put(opp); ++ ++ data->token = token; ++ data->clk = clk; ++ dev_set_drvdata(dev, data); ++ devfreq = devm_devfreq_add_device(dev, &krait_cache_devfreq_profile, ++ DEVFREQ_GOV_PASSIVE, &devfreq_gov_data); ++ if (IS_ERR(devfreq)) { ++ ret = PTR_ERR(devfreq); ++ goto free_opp; ++ } ++ ++ return 0; ++ ++free_opp: ++ dev_pm_opp_clear_config(token); ++ return ret; ++}; ++ ++static int krait_cache_remove(struct platform_device *pdev) ++{ ++ struct krait_cache_data *data = dev_get_drvdata(&pdev->dev); ++ ++ dev_pm_opp_clear_config(data->token); ++ ++ return 0; ++}; ++ ++static const struct of_device_id krait_cache_match_table[] = { ++ { .compatible = "qcom,krait-cache" }, ++ {} ++}; ++ ++static struct platform_driver krait_cache_driver = { ++ .probe = krait_cache_probe, ++ .remove = krait_cache_remove, ++ .driver = { ++ .name = "krait-cache-scaling", ++ .of_match_table = krait_cache_match_table, ++ }, ++}; ++module_platform_driver(krait_cache_driver); ++ ++MODULE_DESCRIPTION("Krait CPU Cache Scaling driver"); ++MODULE_AUTHOR("Christian Marangi "); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch b/target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch new file mode 100644 index 0000000000..45f05dd423 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch @@ -0,0 +1,50 @@ +From ef124ad0ff8abfbf4ebe3fe6d7dcef4541dec13a Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 16 Jun 2022 18:39:21 +0200 +Subject: [PATCH] ARM: dts: qcom: add krait-cache compatible for ipq806x dtsi + +Add qcom,krait-cache compatible to enable cache devfreq driver for +ipq806x SoC and move the L2 node to the soc node to make the devfreq +driver correctly probe. + +Signed-off-by: Christian Marangi +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 22 +++++++++++----------- + 1 file changed, 11 insertions(+), 11 deletions(-) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -69,16 +69,6 @@ + min-residency-us = <3000>; + }; + }; +- +- L2: l2-cache { +- compatible = "cache"; +- cache-level = <2>; +- qcom,saw = <&saw_l2>; +- +- clocks = <&kraitcc 4>; +- clock-names = "l2"; +- operating-points-v2 = <&opp_table_l2>; +- }; + }; + + opp_table_l2: opp_table_l2 { +@@ -1409,6 +1399,16 @@ + #reset-cells = <1>; + }; + ++ L2: l2-cache { ++ compatible = "cache", "qcom,krait-cache"; ++ cache-level = <2>; ++ qcom,saw = <&saw_l2>; ++ ++ clocks = <&kraitcc 4>; ++ clock-names = "l2"; ++ operating-points-v2 = <&opp_table_l2>; ++ }; ++ + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; diff --git a/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch b/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch new file mode 100644 index 0000000000..c9cd3ebdf7 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch @@ -0,0 +1,203 @@ +From 13f075999935bb696dbab63243923179f06fa05e Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 16 Jun 2022 19:56:08 +0200 +Subject: [PATCH 3/4] devfreq: add ipq806x fabric scaling driver + +Add ipq806x fabric scaling driver using the devfreq passive governor. + +Signed-off-by: Christian Marangi +--- + drivers/devfreq/Kconfig | 11 ++ + drivers/devfreq/Makefile | 1 + + drivers/devfreq/ipq806x-fab-devfreq.c | 155 ++++++++++++++++++++++++++ + 3 files changed, 167 insertions(+) + create mode 100644 drivers/devfreq/ipq806x-fab-devfreq.c + +--- a/drivers/devfreq/Kconfig ++++ b/drivers/devfreq/Kconfig +@@ -162,6 +162,17 @@ config ARM_KRAIT_CACHE_DEVFREQ + based on the max frequency across all core and the range set in the device + dts. If provided this scale also the regulator attached to the l2 cache. + ++config ARM_IPQ806X_FAB_DEVFREQ ++ tristate "Scaling support for ipq806x Soc Fabric" ++ depends on ARCH_QCOM || COMPILE_TEST ++ select DEVFREQ_GOV_PASSIVE ++ help ++ This adds the DEVFREQ driver for the ipq806x Soc Fabric. ++ ++ The driver register with the cpufreq notifier and find the right frequency ++ based on the max frequency across all core and the range set in the device ++ dts. ++ + source "drivers/devfreq/event/Kconfig" + + endif # PM_DEVFREQ +--- a/drivers/devfreq/Makefile ++++ b/drivers/devfreq/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += + obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o + obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o + obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o ++obj-$(CONFIG_ARM_IPQ806X_FAB_DEVFREQ) += ipq806x-fab-devfreq.o + + # DEVFREQ Event Drivers + obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/ +--- /dev/null ++++ b/drivers/devfreq/ipq806x-fab-devfreq.c +@@ -0,0 +1,155 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "governor.h" ++ ++struct ipq806x_fab_data { ++ struct clk *fab_clk; ++ struct clk *ddr_clk; ++}; ++ ++static int ipq806x_fab_get_cur_freq(struct device *dev, unsigned long *freq) ++{ ++ struct ipq806x_fab_data *data = dev_get_drvdata(dev); ++ ++ *freq = clk_get_rate(data->fab_clk); ++ ++ return 0; ++}; ++ ++static int ipq806x_fab_target(struct device *dev, unsigned long *freq, ++ u32 flags) ++{ ++ struct ipq806x_fab_data *data = dev_get_drvdata(dev); ++ struct dev_pm_opp *opp; ++ int ret; ++ ++ opp = dev_pm_opp_find_freq_ceil(dev, freq); ++ if (unlikely(IS_ERR(opp))) ++ return PTR_ERR(opp); ++ ++ dev_pm_opp_put(opp); ++ ++ ret = clk_set_rate(data->fab_clk, *freq); ++ if (ret) ++ return ret; ++ ++ return clk_set_rate(data->ddr_clk, *freq); ++}; ++ ++static int ipq806x_fab_get_dev_status(struct device *dev, ++ struct devfreq_dev_status *stat) ++{ ++ struct ipq806x_fab_data *data = dev_get_drvdata(dev); ++ ++ stat->busy_time = 0; ++ stat->total_time = 0; ++ stat->current_frequency = clk_get_rate(data->fab_clk); ++ ++ return 0; ++}; ++ ++static struct devfreq_dev_profile ipq806x_fab_devfreq_profile = { ++ .target = ipq806x_fab_target, ++ .get_dev_status = ipq806x_fab_get_dev_status, ++ .get_cur_freq = ipq806x_fab_get_cur_freq ++}; ++ ++static struct devfreq_passive_data devfreq_gov_data = { ++ .parent_type = CPUFREQ_PARENT_DEV, ++}; ++ ++static int ipq806x_fab_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct ipq806x_fab_data *data; ++ struct devfreq *devfreq; ++ struct clk *clk; ++ int ret; ++ ++ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); ++ if (!data) ++ return -ENOMEM; ++ ++ clk = devm_clk_get(dev, "apps-fab-clk"); ++ if (IS_ERR(clk)) { ++ dev_err_probe(dev, PTR_ERR(clk), "failed to get apps fab clk\n"); ++ return PTR_ERR(clk); ++ } ++ ++ clk_prepare_enable(clk); ++ data->fab_clk = clk; ++ ++ clk = devm_clk_get(dev, "ddr-fab-clk"); ++ if (IS_ERR(clk)) { ++ dev_err_probe(dev, PTR_ERR(clk), "failed to get ddr fab clk\n"); ++ goto err_ddr; ++ } ++ ++ clk_prepare_enable(clk); ++ data->ddr_clk = clk; ++ ++ ret = dev_pm_opp_of_add_table(dev); ++ if (ret) { ++ dev_err(dev, "failed to parse fab freq thresholds\n"); ++ return ret; ++ } ++ ++ dev_set_drvdata(dev, data); ++ ++ devfreq = devm_devfreq_add_device(&pdev->dev, &ipq806x_fab_devfreq_profile, ++ DEVFREQ_GOV_PASSIVE, &devfreq_gov_data); ++ if (IS_ERR(devfreq)) ++ dev_pm_opp_remove_table(dev); ++ ++ return PTR_ERR_OR_ZERO(devfreq); ++ ++err_ddr: ++ clk_unprepare(data->fab_clk); ++ clk_put(data->fab_clk); ++ return PTR_ERR(clk); ++}; ++ ++static int ipq806x_fab_remove(struct platform_device *pdev) ++{ ++ struct ipq806x_fab_data *data = dev_get_drvdata(&pdev->dev); ++ ++ clk_unprepare(data->fab_clk); ++ clk_put(data->fab_clk); ++ ++ clk_unprepare(data->ddr_clk); ++ clk_put(data->ddr_clk); ++ ++ dev_pm_opp_remove_table(&pdev->dev); ++ ++ return 0; ++}; ++ ++static const struct of_device_id ipq806x_fab_match_table[] = { ++ { .compatible = "qcom,fab-scaling" }, ++ {} ++}; ++ ++static struct platform_driver ipq806x_fab_driver = { ++ .probe = ipq806x_fab_probe, ++ .remove = ipq806x_fab_remove, ++ .driver = { ++ .name = "ipq806x-fab-scaling", ++ .of_match_table = ipq806x_fab_match_table, ++ }, ++}; ++module_platform_driver(ipq806x_fab_driver); ++ ++MODULE_DESCRIPTION("ipq806x Fab Scaling driver"); ++MODULE_AUTHOR("Christian Marangi "); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch b/target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch new file mode 100644 index 0000000000..24e0ecf619 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch @@ -0,0 +1,48 @@ +From c3573f0907dadb0a6e9933aae2a46a489abcbd48 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 16 Jun 2022 20:03:05 +0200 +Subject: [PATCH 4/4] ARM: dts: qcom: add fab scaling node for ipq806x + +Add fabric scaling node for ipq806x to correctly scale apps and ddr +fabric clk. + +Signed-off-by: Christian Marangi +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -170,6 +170,18 @@ + }; + }; + ++ opp_table_fab: opp_table_fab { ++ compatible = "operating-points-v2"; ++ ++ opp-533000000 { ++ opp-hz = /bits/ 64 <533000000>; ++ }; ++ ++ opp-400000000 { ++ opp-hz = /bits/ 64 <400000000>; ++ }; ++ }; ++ + thermal-zones { + sensor0-thermal { + polling-delay-passive = <0>; +@@ -1409,6 +1421,13 @@ + operating-points-v2 = <&opp_table_l2>; + }; + ++ fab-scaling { ++ compatible = "qcom,fab-scaling"; ++ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>; ++ clock-names = "apps-fab-clk", "ddr-fab-clk"; ++ operating-points-v2 = <&opp_table_fab>; ++ }; ++ + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; diff --git a/target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch b/target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch new file mode 100644 index 0000000000..c30c245d0a --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch @@ -0,0 +1,47 @@ +From 666c1b745e93ccddde841d5057c33f97b29a316a Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 15 Sep 2022 02:19:28 +0200 +Subject: [PATCH 3/9] clk: qcom: krait-cc: handle qsb clock defined in DTS + +qsb fixed clk may be defined in DTS and correctly passed in the clocks +list. Add related code to handle this and modify the logic to +dynamically read qsb clock frequency. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 14 +++++++++++--- + 1 file changed, 11 insertions(+), 3 deletions(-) + +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -348,7 +348,7 @@ static int krait_cc_probe(struct platfor + { + struct device *dev = &pdev->dev; + const struct of_device_id *id; +- unsigned long cur_rate, aux_rate; ++ unsigned long cur_rate, aux_rate, qsb_rate; + int cpu; + struct clk_hw *mux, *l2_pri_mux; + struct clk *clk, **clks; +@@ -357,11 +357,19 @@ static int krait_cc_probe(struct platfor + if (!id) + return -ENODEV; + +- /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */ +- clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); ++ /* ++ * Per Documentation qsb should be provided from DTS. ++ * To address old implementation, register the fixed clock anyway. ++ * Rate is 1 because 0 causes problems for __clk_mux_determine_rate ++ */ ++ clk = clk_get(dev, "qsb"); ++ if (IS_ERR(clk)) ++ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); + if (IS_ERR(clk)) + return PTR_ERR(clk); + ++ qsb_rate = clk_get_rate(clk); ++ + if (!id->data) { + clk = clk_register_fixed_factor(dev, "acpu_aux", + "gpll0_vote", 0, 1, 2); diff --git a/target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch b/target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch new file mode 100644 index 0000000000..e2f78f79fb --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch @@ -0,0 +1,36 @@ +From fca6f185a9d9ef0892a719bc6da955b22d326ec7 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 15 Sep 2022 02:24:33 +0200 +Subject: [PATCH 4/9] clk: qcom: krait-cc: register REAL qsb fixed clock + +With some tools it was discovered the real frequency of the qsb fixed +clock. While not 100% correct it's still better than using 1 as a dummy +frequency. +Correctly register the qsb fixed clock with the frequency of 225 MHz +instead of 1. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -25,6 +25,8 @@ enum { + clks_max, + }; + ++#define QSB_RATE 2250000000 ++ + static unsigned int sec_mux_map[] = { + 2, + 0, +@@ -364,7 +366,7 @@ static int krait_cc_probe(struct platfor + */ + clk = clk_get(dev, "qsb"); + if (IS_ERR(clk)) +- clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); ++ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, QSB_RATE); + if (IS_ERR(clk)) + return PTR_ERR(clk); + diff --git a/target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch b/target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch new file mode 100644 index 0000000000..d95a63fc44 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch @@ -0,0 +1,44 @@ +From 2399d181557d94ae9a2686926cd25768f132e4b4 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 18 Mar 2022 16:12:14 +0100 +Subject: [PATCH 7/9] clk: qcom: krait-cc: drop pr_info and use dev_info + +Replace pr_info() with dev_info() to provide better diagnostics. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -423,25 +423,25 @@ static int krait_cc_probe(struct platfor + cur_rate = clk_get_rate(clks[l2_mux]); + aux_rate = 384000000; + if (cur_rate < aux_rate) { +- pr_info("L2 @ Undefined rate. Forcing new rate.\n"); ++ dev_info(dev, "L2 @ Undefined rate. Forcing new rate.\n"); + cur_rate = aux_rate; + } + clk_set_rate(clks[l2_mux], aux_rate); + clk_set_rate(clks[l2_mux], 2); + clk_set_rate(clks[l2_mux], cur_rate); +- pr_info("L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000); ++ dev_info(dev, "L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000); + for_each_possible_cpu(cpu) { + clk = clks[cpu]; + cur_rate = clk_get_rate(clk); + if (cur_rate < aux_rate) { +- pr_info("CPU%d @ Undefined rate. Forcing new rate.\n", cpu); ++ dev_info(dev, "CPU%d @ Undefined rate. Forcing new rate.\n", cpu); + cur_rate = aux_rate; + } + + clk_set_rate(clk, aux_rate); + clk_set_rate(clk, 2); + clk_set_rate(clk, cur_rate); +- pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); ++ dev_info(dev, "CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); + } + + of_clk_add_provider(dev->of_node, krait_of_get, clks); diff --git a/target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch b/target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch new file mode 100644 index 0000000000..8f88e06991 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch @@ -0,0 +1,88 @@ +From 6a77cf3f5f95ec0058e1b4d1ada018748cb0b83b Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 15 Sep 2022 03:33:13 +0200 +Subject: [PATCH 9/9] clk: qcom: krait-cc: rework mux reset logic and reset + hfpll + +Rework and clean mux reset logic. +Compact it to a for loop to handle both CPU and L2 in one place. +Move hardcoded aux_rate to define and add a new hfpll_rate value to +reset hfpll settings. +Change logic to now reset the hfpll to the lowest value of 600 Mhz and +then restoring the previous frequency. This permits to reset the hfpll if +the primary mux was set to source out of the secondary mux. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/krait-cc.c | 50 +++++++++++++++++-------------------- + 1 file changed, 23 insertions(+), 27 deletions(-) + +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -25,7 +25,9 @@ enum { + clks_max, + }; + +-#define QSB_RATE 2250000000 ++#define QSB_RATE 225000000 ++#define AUX_RATE 384000000 ++#define HFPLL_RATE 600000000 + + static unsigned int sec_mux_map[] = { + 2, +@@ -350,7 +352,7 @@ static int krait_cc_probe(struct platfor + { + struct device *dev = &pdev->dev; + const struct of_device_id *id; +- unsigned long cur_rate, aux_rate, qsb_rate; ++ unsigned long cur_rate, qsb_rate; + int cpu; + struct clk_hw *mux, *l2_pri_mux; + struct clk *clk, **clks; +@@ -420,28 +422,29 @@ static int krait_cc_probe(struct platfor + * two different rates to force a HFPLL reinit under all + * circumstances. + */ +- cur_rate = clk_get_rate(clks[l2_mux]); +- aux_rate = 384000000; +- if (cur_rate < aux_rate) { +- dev_info(dev, "L2 @ Undefined rate. Forcing new rate.\n"); +- cur_rate = aux_rate; +- } +- clk_set_rate(clks[l2_mux], aux_rate); +- clk_set_rate(clks[l2_mux], 2); +- clk_set_rate(clks[l2_mux], cur_rate); +- dev_info(dev, "L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000); +- for_each_possible_cpu(cpu) { ++ for (cpu = 0; cpu < 5; cpu++) { ++ const char *l2_s = "L2"; ++ char cpu_s[5]; ++ + clk = clks[cpu]; ++ if (!clk) ++ continue; ++ ++ if (cpu < 4) ++ snprintf(cpu_s, 5, "CPU%d", cpu); ++ + cur_rate = clk_get_rate(clk); +- if (cur_rate < aux_rate) { +- dev_info(dev, "CPU%d @ Undefined rate. Forcing new rate.\n", cpu); +- cur_rate = aux_rate; ++ if (cur_rate < AUX_RATE) { ++ dev_info(dev, "%s @ Undefined rate. Forcing new rate.\n", ++ cpu < 4 ? cpu_s : l2_s); ++ cur_rate = AUX_RATE; + } + +- clk_set_rate(clk, aux_rate); +- clk_set_rate(clk, 2); ++ clk_set_rate(clk, AUX_RATE); ++ clk_set_rate(clk, HFPLL_RATE); + clk_set_rate(clk, cur_rate); +- dev_info(dev, "CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); ++ dev_info(dev, "%s @ %lu KHz\n", cpu < 4 ? cpu_s : l2_s, ++ clk_get_rate(clk) / 1000); + } + + of_clk_add_provider(dev->of_node, krait_of_get, clks); diff --git a/target/linux/ipq806x/patches-6.1/122-05-clk-qcom-clk-krait-generilize-div-functions.patch b/target/linux/ipq806x/patches-6.1/122-05-clk-qcom-clk-krait-generilize-div-functions.patch new file mode 100644 index 0000000000..a7c0f046c8 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/122-05-clk-qcom-clk-krait-generilize-div-functions.patch @@ -0,0 +1,156 @@ +From 908c361b3c3a139eb3e6a798cb620a6da7514d5c Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 23 Sep 2022 19:05:39 +0200 +Subject: [PATCH 2/4] clk: qcom: clk-krait: generilize div functions + +Generilize div functions and remove hardcode to a divisor of 2. +This is just a cleanup and permit to make it more clear the settings of +the devisor when used by the krait-cc driver. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/clk-krait.c | 57 ++++++++++++++++++++---------------- + drivers/clk/qcom/clk-krait.h | 11 ++++--- + drivers/clk/qcom/krait-cc.c | 7 +++-- + 3 files changed, 42 insertions(+), 33 deletions(-) + +--- a/drivers/clk/qcom/clk-krait.c ++++ b/drivers/clk/qcom/clk-krait.c +@@ -97,53 +97,58 @@ const struct clk_ops krait_mux_clk_ops = + EXPORT_SYMBOL_GPL(krait_mux_clk_ops); + + /* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */ +-static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate, ++static long krait_div_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) + { +- *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2); +- return DIV_ROUND_UP(*parent_rate, 2); ++ struct krait_div_clk *d = to_krait_div_clk(hw); ++ ++ *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), ++ rate * d->divisor); ++ ++ return DIV_ROUND_UP(*parent_rate, d->divisor); + } + +-static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate, ++static int krait_div_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) + { +- struct krait_div2_clk *d = to_krait_div2_clk(hw); ++ struct krait_div_clk *d = to_krait_div_clk(hw); ++ u8 div_val = krait_div_to_val(d->divisor); + unsigned long flags; +- u32 val; +- u32 mask = BIT(d->width) - 1; +- +- if (d->lpl) +- mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift; +- else +- mask <<= d->shift; ++ u32 regval; + + spin_lock_irqsave(&krait_clock_reg_lock, flags); +- val = krait_get_l2_indirect_reg(d->offset); +- val &= ~mask; +- krait_set_l2_indirect_reg(d->offset, val); ++ regval = krait_get_l2_indirect_reg(d->offset); ++ ++ regval &= ~(d->mask << d->shift); ++ regval |= (div_val & d->mask) << d->shift; ++ ++ if (d->lpl) { ++ regval &= ~(d->mask << (d->shift + LPL_SHIFT)); ++ regval |= (div_val & d->mask) << (d->shift + LPL_SHIFT); ++ } ++ ++ krait_set_l2_indirect_reg(d->offset, regval); + spin_unlock_irqrestore(&krait_clock_reg_lock, flags); + + return 0; + } + + static unsigned long +-krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) ++krait_div_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) + { +- struct krait_div2_clk *d = to_krait_div2_clk(hw); +- u32 mask = BIT(d->width) - 1; ++ struct krait_div_clk *d = to_krait_div_clk(hw); + u32 div; + + div = krait_get_l2_indirect_reg(d->offset); + div >>= d->shift; +- div &= mask; +- div = (div + 1) * 2; ++ div &= d->mask; + +- return DIV_ROUND_UP(parent_rate, div); ++ return DIV_ROUND_UP(parent_rate, krait_val_to_div(div)); + } + +-const struct clk_ops krait_div2_clk_ops = { +- .round_rate = krait_div2_round_rate, +- .set_rate = krait_div2_set_rate, +- .recalc_rate = krait_div2_recalc_rate, ++const struct clk_ops krait_div_clk_ops = { ++ .round_rate = krait_div_round_rate, ++ .set_rate = krait_div_set_rate, ++ .recalc_rate = krait_div_recalc_rate, + }; +-EXPORT_SYMBOL_GPL(krait_div2_clk_ops); ++EXPORT_SYMBOL_GPL(krait_div_clk_ops); +--- a/drivers/clk/qcom/clk-krait.h ++++ b/drivers/clk/qcom/clk-krait.h +@@ -25,17 +25,20 @@ struct krait_mux_clk { + + extern const struct clk_ops krait_mux_clk_ops; + +-struct krait_div2_clk { ++struct krait_div_clk { + u32 offset; +- u8 width; ++ u32 mask; ++ u8 divisor; + u32 shift; + bool lpl; + + struct clk_hw hw; + }; + +-#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw) ++#define to_krait_div_clk(_hw) container_of(_hw, struct krait_div_clk, hw) ++#define krait_div_to_val(_div) ((_div) / 2) - 1 ++#define krait_val_to_div(_val) ((_val) + 1) * 2 + +-extern const struct clk_ops krait_div2_clk_ops; ++extern const struct clk_ops krait_div_clk_ops; + + #endif +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -86,11 +86,11 @@ static int krait_notifier_register(struc + static struct clk_hw * + krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) + { +- struct krait_div2_clk *div; ++ struct krait_div_clk *div; + static struct clk_parent_data p_data[1]; + struct clk_init_data init = { + .num_parents = ARRAY_SIZE(p_data), +- .ops = &krait_div2_clk_ops, ++ .ops = &krait_div_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; + struct clk_hw *clk; +@@ -101,7 +101,8 @@ krait_add_div(struct device *dev, int id + if (!div) + return ERR_PTR(-ENOMEM); + +- div->width = 2; ++ div->mask = 0x3; ++ div->divisor = 2; + div->shift = 6; + div->lpl = id >= 0; + div->offset = offset; diff --git a/target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch b/target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch new file mode 100644 index 0000000000..0df29a0787 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch @@ -0,0 +1,31 @@ +From ac84ac819a2e8fd3d87122b452c502a386c54437 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Tue, 5 Jul 2022 18:30:18 +0200 +Subject: [PATCH v2 4/4] clk: qcom: gcc-ipq806x: remove cc_register_board for + pxo and cxo + +Now that these clock are defined as fixed clk in dts, we can drop the +register_board_clk for cxo_board and pxo_board in gcc_ipq806x_probe. + +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/gcc-ipq806x.c | 8 -------- + 1 file changed, 8 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq806x.c ++++ b/drivers/clk/qcom/gcc-ipq806x.c +@@ -3386,14 +3386,6 @@ static int gcc_ipq806x_probe(struct plat + struct regmap *regmap; + int ret; + +- ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 25000000); +- if (ret) +- return ret; +- +- ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 25000000); +- if (ret) +- return ret; +- + if (of_machine_is_compatible("qcom,ipq8065")) { + ubi32_core1_src_clk.freq_tbl = clk_tbl_nss_ipq8065; + ubi32_core2_src_clk.freq_tbl = clk_tbl_nss_ipq8065; diff --git a/target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch new file mode 100644 index 0000000000..397c4481ab --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch @@ -0,0 +1,121 @@ +From: Christian Lamparter +Subject: SoC: add qualcomm syscon +--- a/drivers/soc/qcom/Makefile ++++ b/drivers/soc/qcom/Makefile +@@ -23,6 +23,7 @@ obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o + obj-$(CONFIG_QCOM_SPM) += spm.o + obj-$(CONFIG_QCOM_STATS) += qcom_stats.o + obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o ++obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o + obj-$(CONFIG_QCOM_APR) += apr.o + obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o + obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o +--- a/drivers/soc/qcom/Kconfig ++++ b/drivers/soc/qcom/Kconfig +@@ -213,6 +213,13 @@ config QCOM_STATS + various SoC level low power modes statistics and export to debugfs + interface. + ++config QCOM_TCSR ++ tristate "QCOM Top Control and Status Registers" ++ depends on ARCH_QCOM ++ help ++ Say y here to enable TCSR support. The TCSR provides control ++ functions for various peripherals. ++ + config QCOM_WCNSS_CTRL + tristate "Qualcomm WCNSS control driver" + depends on ARCH_QCOM || COMPILE_TEST +--- /dev/null ++++ b/drivers/soc/qcom/qcom_tcsr.c +@@ -0,0 +1,64 @@ ++/* ++ * Copyright (c) 2014, The Linux foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License rev 2 and ++ * only rev 2 as published by the free Software foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define TCSR_USB_PORT_SEL 0xb0 ++ ++static int tcsr_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ const struct device_node *node = pdev->dev.of_node; ++ void __iomem *base; ++ u32 val; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { ++ dev_err(&pdev->dev, "setting usb port select = %d\n", val); ++ writel(val, base + TCSR_USB_PORT_SEL); ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id tcsr_dt_match[] = { ++ { .compatible = "qcom,tcsr", }, ++ { }, ++}; ++ ++MODULE_DEVICE_TABLE(of, tcsr_dt_match); ++ ++static struct platform_driver tcsr_driver = { ++ .driver = { ++ .name = "tcsr", ++ .owner = THIS_MODULE, ++ .of_match_table = tcsr_dt_match, ++ }, ++ .probe = tcsr_probe, ++}; ++ ++module_platform_driver(tcsr_driver); ++ ++MODULE_AUTHOR("Andy Gross "); ++MODULE_DESCRIPTION("QCOM TCSR driver"); ++MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/include/dt-bindings/soc/qcom,tcsr.h +@@ -0,0 +1,23 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++#ifndef __DT_BINDINGS_QCOM_TCSR_H ++#define __DT_BINDINGS_QCOM_TCSR_H ++ ++#define TCSR_USB_SELECT_USB3_P0 0x1 ++#define TCSR_USB_SELECT_USB3_P1 0x2 ++#define TCSR_USB_SELECT_USB3_DUAL 0x3 ++ ++/* TCSR A/B REG */ ++#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 ++#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 ++ ++#endif diff --git a/target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch b/target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch new file mode 100644 index 0000000000..c9583549d0 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch @@ -0,0 +1,37 @@ +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1589,6 +1589,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN + + endchoice + ++config CMDLINE_OVERRIDE ++ bool "Use alternative cmdline from device tree" ++ help ++ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can ++ be used, this is not a good option for kernels that are shared across ++ devices. This setting enables using "chosen/cmdline-override" as the ++ cmdline if it exists in the device tree. ++ + config CMDLINE + string "Default kernel command string" + default "" +--- a/drivers/of/fdt.c ++++ b/drivers/of/fdt.c +@@ -1187,6 +1187,17 @@ int __init early_init_dt_scan_chosen(cha + if (p != NULL && l > 0) + strlcat(cmdline, p, min_t(int, strlen(cmdline) + (int)l, COMMAND_LINE_SIZE)); + ++ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different ++ * device tree option of chosen/bootargs-override. This is ++ * helpful on boards where u-boot sets bootargs, and is unable ++ * to be modified. ++ */ ++#ifdef CONFIG_CMDLINE_OVERRIDE ++ p = of_get_flat_dt_prop(node, "bootargs-override", &l); ++ if (p != NULL && l > 0) ++ strlcpy(cmdline, p, min((int)l, COMMAND_LINE_SIZE)); ++#endif ++ + handle_cmdline: + /* + * CONFIG_CMDLINE is meant to be a default in case nothing else diff --git a/target/linux/ipq806x/patches-6.1/901-01-ARM-decompressor-support-memory-start-validation-.patch b/target/linux/ipq806x/patches-6.1/901-01-ARM-decompressor-support-memory-start-validation-.patch new file mode 100644 index 0000000000..04e2a0c57e --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/901-01-ARM-decompressor-support-memory-start-validation-.patch @@ -0,0 +1,75 @@ +From 2f86b9b71a11f86e3d850214ab781ebb17d7260e Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 19 Jan 2024 19:48:30 +0100 +Subject: [PATCH v2 1/2] ARM: decompressor: support memory start validation for + appended DTB + +There is currently a problem with a very specific sets of kernel config +and AUTO_ZRELADDR. + +For the most common case AUTO_ZRELADDR check the PC register and +calculate the start of the physical memory. Then fdt_check_mem_start is +called to make sure the detected value makes sense by comparing it with +what is present in DTB in the memory nodes and if additional fixup are +required with the use of linux,usable-memory-range in the chosen node to +hardcode usable memory range in case some reserved space needs to be +addressed. With the help of this function the right address is +calculated and the kernel correctly decompress and loads. + +Things starts to become problematic when in the mix, +CONFIG_ARM_APPENDED_DTB is used. This is a particular kernel config is +used when legacy systems doesn't support passing a DTB directly and a +DTB is appended at the end of the image. + +In such case, fdt_check_mem_start is skipped in AUTO_ZRELADDR iteration +as the appended DTB can be augumented later with ATAGS passed from the +bootloader (if CONFIG_ARM_ATAG_DTB_COMPAT is enabled). + +The main problem and what this patch address is the fact that +fdt_check_mem_start is never called later when the appended DTB is +augumented, hence any fixup and validation is not done making AUTO_ZRELADDR +detection inconsistent and most of the time wrong. + +Add support in head.S for this by checking if AUTO_ZRELADDR is enabled +and calling fdt_check_mem_start with the appended DTB and the augumented +values permitting legacy device to provide info in DTB instead of +disabling AUTO_ZRELADDR and hardcoding the physical address offsets. + +Signed-off-by: Christian Marangi +Reviewed-by: Geert Uytterhoeven +Reviewed-by: Linus Walleij +--- + arch/arm/boot/compressed/head.S | 22 ++++++++++++++++++++++ + 1 file changed, 22 insertions(+) + +--- a/arch/arm/boot/compressed/head.S ++++ b/arch/arm/boot/compressed/head.S +@@ -443,6 +443,28 @@ restart: adr r0, LC1 + add r6, r6, r5 + add r10, r10, r5 + add sp, sp, r5 ++ ++#ifdef CONFIG_AUTO_ZRELADDR ++ /* ++ * Validate calculated start of physical memory with appended DTB. ++ * In the first iteration for physical memory start calculation, ++ * we skipped validating it as it could have been augumented by ++ * ATAGS stored at an offset from the same start of physical memory. ++ * ++ * We now have parsed them and augumented the appended DTB if asked ++ * so we can finally validate the start of physical memory. ++ * ++ * This is needed to apply additional fixup with ++ * linux,usable-memory-range or to make sure AUTO_ZRELADDR detected ++ * the correct value. ++ */ ++ sub r0, r4, #TEXT_OFFSET @ revert to base address ++ mov r1, r8 @ use appended DTB ++ bl fdt_check_mem_start ++ ++ /* Determine final kernel image address. */ ++ add r4, r0, #TEXT_OFFSET ++#endif + dtb_check_done: + #endif + diff --git a/target/linux/ipq806x/patches-6.1/901-02-ARM-decompressor-add-option-to-ignore-MEM-ATAGs.patch b/target/linux/ipq806x/patches-6.1/901-02-ARM-decompressor-add-option-to-ignore-MEM-ATAGs.patch new file mode 100644 index 0000000000..2e4c4de545 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/901-02-ARM-decompressor-add-option-to-ignore-MEM-ATAGs.patch @@ -0,0 +1,54 @@ +From 781d7cd4c3364e9d38fa12a342c5ad4c7e33a5ba Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 19 Jan 2024 20:33:10 +0100 +Subject: [PATCH v2 2/2] ARM: decompressor: add option to ignore MEM ATAGs + +Some bootloaders can pass broken MEM ATAGs that provide hardcoded +information about mounted RAM size and physical location. +Example booloader provide RAM of size 1.7Gb but actual mounted RAM +size is 512Mb causing kernel panic. + +Add option CONFIG_ARM_ATAG_DTB_COMPAT_IGNORE_MEM to ignore these ATAG +and not augument appended DTB memory node. + +Signed-off-by: Christian Marangi +Acked-by: Linus Walleij +--- + arch/arm/Kconfig | 12 ++++++++++++ + arch/arm/boot/compressed/atags_to_fdt.c | 4 ++++ + 2 files changed, 16 insertions(+) + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1570,6 +1570,18 @@ config ARM_ATAG_DTB_COMPAT + bootloaders, this option allows zImage to extract the information + from the ATAG list and store it at run time into the appended DTB. + ++config ARM_ATAG_DTB_COMPAT_IGNORE_MEM ++ bool "Ignore MEM ATAG information from bootloader" ++ depends on ARM_ATAG_DTB_COMPAT ++ help ++ Some bootloaders can pass broken MEM ATAGs that provide hardcoded ++ information about mounted RAM size and physical location. ++ Example booloader provide RAM of size 1.7Gb but actual mounted RAM ++ size is 512Mb causing kernel panic. ++ ++ Enable this option if MEM ATAGs should be ignored and the memory ++ node in the appended DTB should NOT be augumented. ++ + choice + prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT + default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER +--- a/arch/arm/boot/compressed/atags_to_fdt.c ++++ b/arch/arm/boot/compressed/atags_to_fdt.c +@@ -169,6 +169,10 @@ int atags_to_fdt(void *atag_list, void * + setprop_string(fdt, "/chosen", "bootargs", + atag->u.cmdline.cmdline); + } else if (atag->hdr.tag == ATAG_MEM) { ++ /* Bootloader MEM ATAG are broken and should be ignored */ ++ if (IS_ENABLED(CONFIG_ARM_ATAG_DTB_COMPAT_IGNORE_MEM)) ++ continue; ++ + if (memcount >= sizeof(mem_reg_property)/4) + continue; + if (!atag->u.mem.size) diff --git a/target/linux/ipq806x/patches-6.1/902-ARM-decompressor-support-for-ATAGs-rootblock-parsing.patch b/target/linux/ipq806x/patches-6.1/902-ARM-decompressor-support-for-ATAGs-rootblock-parsing.patch new file mode 100644 index 0000000000..60b80fefe1 --- /dev/null +++ b/target/linux/ipq806x/patches-6.1/902-ARM-decompressor-support-for-ATAGs-rootblock-parsing.patch @@ -0,0 +1,197 @@ +From 13bb6d8dd9138927950a520a288401db82871dc9 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Sun, 21 Jan 2024 23:36:57 +0100 +Subject: [PATCH] ARM: decompressor: support for ATAGs rootblock parsing + +The command-line arguments provided by the boot loader will be +appended to a new device tree property: bootloader-args. + +If there is a property "append-rootblock" in DT under /chosen +and a root= option in bootloaders command line it will be parsed +and added to DT bootargs with the form: XX. + +This is usefull in dual boot systems, to get the current root partition +without afecting the rest of the system. + +Signed-off-by: Adrian Panella +[ reworked to a cleaner patch ] +Signed-off-by: Christian Marangi +--- + arch/arm/Kconfig | 10 +++ + arch/arm/boot/compressed/atags_to_fdt.c | 102 ++++++++++++++++++++++-- + init/main.c | 12 +++ + 3 files changed, 117 insertions(+), 7 deletions(-) + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1599,6 +1599,16 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN + The command-line arguments provided by the boot loader will be + appended to the the device tree bootargs property. + ++config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE ++ bool "Append rootblock parsing bootloader's kernel arguments" ++ help ++ The command-line arguments provided by the boot loader will be ++ appended to a new device tree property: bootloader-args. ++ ++ If there is a property "append-rootblock" in DT under /chosen ++ and a root= option in bootloaders command line it will be parsed ++ and added to DT bootargs with the form: XX. ++ + endchoice + + config CMDLINE_OVERRIDE +--- a/arch/arm/boot/compressed/atags_to_fdt.c ++++ b/arch/arm/boot/compressed/atags_to_fdt.c +@@ -3,7 +3,8 @@ + #include + #include + +-#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) || \ ++ defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) + #define do_extend_cmdline 1 + #else + #define do_extend_cmdline 0 +@@ -69,6 +70,83 @@ static uint32_t get_cell_size(const void + return cell_size; + } + ++/** ++ * taken from arch/x86/boot/string.c ++ * local_strstr - Find the first substring in a %NUL terminated string ++ * @s1: The string to be searched ++ * @s2: The string to search for ++ */ ++static char *local_strstr(const char *s1, const char *s2) ++{ ++ size_t l1, l2; ++ ++ l2 = strlen(s2); ++ if (!l2) ++ return (char *)s1; ++ l1 = strlen(s1); ++ while (l1 >= l2) { ++ l1--; ++ if (!memcmp(s1, s2, l2)) ++ return (char *)s1; ++ s1++; ++ } ++ return NULL; ++} ++ ++static char *append_rootblock(char *dest, const char *str, int len, void *fdt) ++{ ++ char *ptr, *end, *tmp; ++ const char *root="root="; ++ const char *find_rootblock; ++ int i, l; ++ const char *rootblock; ++ ++ find_rootblock = getprop(fdt, "/chosen", "find-rootblock", &l); ++ if (!find_rootblock) ++ find_rootblock = root; ++ ++ /* ARM doesn't have __HAVE_ARCH_STRSTR, so it was copied from x86 */ ++ ptr = local_strstr(str, find_rootblock); ++ if (!ptr) ++ return dest; ++ ++ end = strchr(ptr, ' '); ++ end = end ? (end - 1) : (strchr(ptr, 0) - 1); ++ ++ /* Some boards ubi.mtd=XX,ZZZZ, so let's check for '," too. */ ++ tmp = strchr(ptr, ','); ++ if (tmp) ++ end = end < tmp ? end : tmp - 1; ++ ++ /* ++ * find partition number ++ * (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX | ubi.mtd=XX,ZZZZ ) ++ */ ++ for (i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); ++ ++ ptr = end + 1; ++ ++ /* if append-rootblock property is set use it to append to command line */ ++ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); ++ if (rootblock != NULL) { ++ if (*dest != ' ') { ++ *dest = ' '; ++ dest++; ++ len++; ++ } ++ ++ if (len + l + i <= COMMAND_LINE_SIZE) { ++ memcpy(dest, rootblock, l); ++ dest += l - 1; ++ ++ memcpy(dest, ptr, i); ++ dest += i; ++ } ++ } ++ ++ return dest; ++} ++ + static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) + { + char cmdline[COMMAND_LINE_SIZE]; +@@ -86,13 +164,23 @@ static void merge_fdt_bootargs(void *fdt + ptr += len - 1; + } + +- /* and append the ATAG_CMDLINE */ + if (fdt_cmdline) { +- len = strlen(fdt_cmdline); +- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { +- *ptr++ = ' '; +- memcpy(ptr, fdt_cmdline, len); +- ptr += len; ++ if (IS_ENABLED(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)) { ++ /* ++ * save original bootloader args ++ * and append ubi.mtd with root partition number ++ * to current cmdline ++ */ ++ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); ++ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); ++ } else { ++ /* and append the ATAG_CMDLINE */ ++ len = strlen(fdt_cmdline); ++ if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { ++ *ptr++ = ' '; ++ memcpy(ptr, fdt_cmdline, len); ++ ptr += len; ++ } + } + } + *ptr = '\0'; +--- a/init/main.c ++++ b/init/main.c +@@ -28,6 +28,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -995,6 +996,17 @@ asmlinkage __visible void __init __no_sa + pr_notice("Kernel command line: %s\n", saved_command_line); + /* parameters may set static keys */ + jump_label_init(); ++ ++ /* Show bootloader's original command line for reference */ ++ if (IS_ENABLED(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) && of_chosen) { ++ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); ++ ++ if(prop) ++ pr_notice("Bootloader command line (ignored): %s\n", prop); ++ else ++ pr_notice("Bootloader command line not present\n"); ++ } ++ + parse_early_param(); + after_dashes = parse_args("Booting kernel", + static_command_line, __start___param,