From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sun, 8 Jan 2006 09:01:11 +0000 (-0800)
Subject: [PATCH] cs89x0: cleanly implement ixdp2x01 and pnx0501 support
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3b68d70dffe255e7681d5725d96bc2b92a24bb9d;p=openwrt%2Fstaging%2Fblogic.git

[PATCH] cs89x0: cleanly implement ixdp2x01 and pnx0501 support

Implement suitable versions of the readword/writeword macros for ixdp2x01 and
pnx0501.  Handle the 32-bit spacing of the registers in these functions
instead of in the header file.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: dmitry pervushin <dpervushin@ru.mvista.com>
Cc: <dsaxena@plexity.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
---

diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 756d80adc47b..7abc9f858f98 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -338,6 +338,32 @@ out:
 }
 #endif
 
+#if defined(CONFIG_ARCH_IXDP2X01)
+static int
+readword(unsigned long base_addr, int portno)
+{
+	return (u16)__raw_readl(base_addr + (portno << 1));
+}
+
+static void
+writeword(unsigned long base_addr, int portno, int value)
+{
+	__raw_writel((u16)value, base_addr + (portno << 1));
+}
+#else
+#if defined(CONFIG_ARCH_PNX0501)
+static int
+readword(unsigned long base_addr, int portno)
+{
+	return inw(base_addr + (portno << 1));
+}
+
+static void
+writeword(unsigned long base_addr, int portno, int value)
+{
+	outw(value, base_addr + (portno << 1));
+}
+#else
 static int
 readword(unsigned long base_addr, int portno)
 {
@@ -349,6 +375,8 @@ writeword(unsigned long base_addr, int portno, int value)
 {
 	outw(value, base_addr + portno);
 }
+#endif
+#endif
 
 static int
 readreg(struct net_device *dev, int regno)
diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h
index decea264f121..bd954aaa636f 100644
--- a/drivers/net/cs89x0.h
+++ b/drivers/net/cs89x0.h
@@ -16,13 +16,6 @@
 
 #include <linux/config.h>
 
-#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
-/* IXDP2401/IXDP2801 uses dword-aligned register addressing */
-#define CS89x0_PORT(reg) ((reg) * 2)
-#else
-#define CS89x0_PORT(reg) (reg)
-#endif
-
 #define PP_ChipID 0x0000	/* offset   0h -> Corp -ID              */
 				/* offset   2h -> Model/Product Number  */
 				/* offset   3h -> Chip Revision Number  */
@@ -332,16 +325,16 @@
 #define RAM_SIZE	0x1000       /*  The card has 4k bytes or RAM */
 #define PKT_START PP_TxFrame  /*  Start of packet RAM */
 
-#define RX_FRAME_PORT	CS89x0_PORT(0x0000)
+#define RX_FRAME_PORT	0x0000
 #define TX_FRAME_PORT RX_FRAME_PORT
-#define TX_CMD_PORT	CS89x0_PORT(0x0004)
+#define TX_CMD_PORT	0x0004
 #define TX_NOW		0x0000       /*  Tx packet after   5 bytes copied */
 #define TX_AFTER_381	0x0040       /*  Tx packet after 381 bytes copied */
 #define TX_AFTER_ALL	0x00c0       /*  Tx packet after all bytes copied */
-#define TX_LEN_PORT	CS89x0_PORT(0x0006)
-#define ISQ_PORT	CS89x0_PORT(0x0008)
-#define ADD_PORT	CS89x0_PORT(0x000A)
-#define DATA_PORT	CS89x0_PORT(0x000C)
+#define TX_LEN_PORT	0x0006
+#define ISQ_PORT	0x0008
+#define ADD_PORT	0x000A
+#define DATA_PORT	0x000C
 
 #define EEPROM_WRITE_EN		0x00F0
 #define EEPROM_WRITE_DIS	0x0000