From: Koen Vandeputte Date: Mon, 29 May 2017 09:58:01 +0000 (+0200) Subject: imx6: disable UART dma X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3b4241071dd42e966bc4f120c91b55b4d377865c;p=openwrt%2Fstaging%2Flinusw.git imx6: disable UART dma Fixes these prints on boot: [ 13.785600] imx-uart 2020000.serial: DMA transaction error. [ 13.793134] imx-uart 2020000.serial: DMA transaction error. [ 13.798721] imx-uart 2020000.serial: DMA transaction error. Based on following upstream patch by Tim Harvey (Gateworks): https://github.com/Gateworks/openwrt/commit/80a01b6582f94c4547f39d3a25e0a1e9b6eb9877 TX complete DMA messages are getting missed. This is also currently an issue in mainline. For now we will disable DMA in serial/imx.c. This resolves an issue encountered with RS485 transmit. Signed-off-by: Koen Vandeputte --- diff --git a/target/linux/imx6/patches-4.9/210-disable-uart-dma.patch b/target/linux/imx6/patches-4.9/210-disable-uart-dma.patch new file mode 100644 index 0000000000..6abbb93301 --- /dev/null +++ b/target/linux/imx6/patches-4.9/210-disable-uart-dma.patch @@ -0,0 +1,23 @@ +Based on following upstream patch by Tim Harvey (Gateworks): + +https://github.com/Gateworks/openwrt/commit/80a01b6582f94c4547f39d3a25e0a1e9b6eb9877 + +TX complete DMA messages are getting missed. +This is also currently an issue in mainline. +For now we will disable DMA in serial/imx.c. + +This resolves an issue encountered with RS485 transmit. + +--- a/drivers/tty/serial/imx.c ++++ b/drivers/tty/serial/imx.c +@@ -1268,10 +1268,6 @@ static int imx_startup(struct uart_port + + writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); + +- /* Can we enable the DMA support? */ +- if (!uart_console(port) && !sport->dma_is_inited) +- imx_uart_dma_init(sport); +- + spin_lock_irqsave(&sport->port.lock, flags); + /* Reset fifo's and state machines */ + i = 100;