From: LoveSy Date: Mon, 28 May 2018 01:46:28 +0000 (+0800) Subject: ramips: mmc: Fix init for MT7628AN X-Git-Tag: v19.07.0-rc1~3006 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3a8efaef00d6b7317c46fe6b7e923912d8bf3500;p=openwrt%2Fstaging%2Fhauke.git ramips: mmc: Fix init for MT7628AN There is another thing about crc to do when initialize SD card on MT7628. This commit is to fix this init issue. Signed-off-by: LoveSy --- diff --git a/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/mt6575_sd.h b/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/mt6575_sd.h index 33fa59a019..a3c50d0528 100644 --- a/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/mt6575_sd.h +++ b/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/mt6575_sd.h @@ -234,6 +234,7 @@ enum { #define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */ #define MSDC_IOCON_RSPL (0x1 << 1) /* RW */ #define MSDC_IOCON_DSPL (0x1 << 2) /* RW */ +#define MSDC_IOCON_WDSPL (0x1 << 8) /* RW */ #define MSDC_IOCON_DDLSEL (0x1 << 3) /* RW */ #define MSDC_IOCON_DDR50CKD (0x1 << 4) /* RW */ #define MSDC_IOCON_DSPLSEL (0x1 << 5) /* RW */ diff --git a/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c b/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c index 97ae927d2d..e1493290a0 100644 --- a/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c +++ b/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c @@ -1796,6 +1796,9 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) MSDC_SMPL_FALLING); sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, MSDC_SMPL_FALLING); + /* sdxc: set sample crc by clock falling edge. Added by zhangzf */ + if (ralink_soc == MT762X_SOC_MT7628AN) + sdr_set_field(MSDC_IOCON, MSDC_IOCON_WDSPL, MSDC_SMPL_FALLING); //} /* for tuning debug */ } else { /* default value */ sdr_write32(MSDC_IOCON, 0x00000000); @@ -2205,7 +2208,7 @@ static int msdc_drv_probe(struct platform_device *pdev) struct msdc_host *host; struct msdc_hw *hw; int ret; - u32 reg; + u32 reg, reg1; // Set the pins for sdxc to sdxc mode //FIXME: this should be done by pinctl and not by the sd driver @@ -2215,6 +2218,17 @@ static int msdc_drv_probe(struct platform_device *pdev) 0x60)) & ~(0x3 << 18); if (ralink_soc == MT762X_SOC_MT7620A) reg |= 0x1 << 18; + } + else if (ralink_soc == MT762X_SOC_MT7628AN) { + /* Fixed MT7628 SDXC init by zhangzf */ + reg &= ~((0x3 << 0)|(0x3 << 6)|(0x3 << 10)|(0x1 << 15)|(0x3 << 20)|(0x3 << 24)); + reg |= ((0x1 << 0)|(0x1 << 6)|(0x1 << 10)|(0x1 << 15)|(0x1 << 20)|(0x1 << 24)); +#if defined (CONFIG_MTK_MMC_EMMC_8BIT) + reg |= 0x3 << 26 | 0x3 << 28 | 0x3 << 30; +#endif + reg1 = sdr_read32((void __iomem *)(RALINK_SYSCTL_BASE + 0x1340)); + reg1 |= (0x1 << 11); //Normal mode(AP mode), SDXC CLK=PAD_GPIO0=GPIO11, driving = 8mA + sdr_write32((void __iomem *)(RALINK_SYSCTL_BASE + 0x1340), reg1); } else { reg = sdr_read32((void __iomem *)(RALINK_SYSCTL_BASE + 0x3c)); reg |= 0x1e << 16;