From: Maxim Anisimov Date: Wed, 18 Dec 2019 06:48:38 +0000 (+0300) Subject: ramips: fix leds for TP-Link Archer C20 v4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3a538db60abfc50b47ce1774f66d489700a50c00;p=openwrt%2Fstaging%2Fldir.git ramips: fix leds for TP-Link Archer C20 v4 - add "gpio" group for wan_orange led - use tpt triggers for wifi led indication - add wifi 5 GHz led support Signed-off-by: Maxim Anisimov [slight commit message adjustment] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ramips/dts/mt7628an_tplink_archer-c20-v4.dts b/target/linux/ramips/dts/mt7628an_tplink_archer-c20-v4.dts index 502c271ae2..8e3df9c676 100644 --- a/target/linux/ramips/dts/mt7628an_tplink_archer-c20-v4.dts +++ b/target/linux/ramips/dts/mt7628an_tplink_archer-c20-v4.dts @@ -42,11 +42,13 @@ wlan5g { label = "archer-c20-v4:green:wlan5g"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; wlan2g { label = "archer-c20-v4:green:wlan2g"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; wps { @@ -82,7 +84,7 @@ &state_default { gpio { - ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt"; + ralink,group = "i2s", "gpio", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt"; ralink,function = "gpio"; }; }; diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index f410c47eac..06b78eb195 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -55,7 +55,6 @@ tama,w06) tplink,archer-c20-v4) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0" ;; tplink,archer-c50-v3|\ tplink,archer-c50-v4)