From: Vittorio Gambaletta (VittGam) <openwrt@vittgam.net>
Date: Wed, 4 May 2016 19:22:19 +0000 (+0200)
Subject: ramips: Don't use a VLAN for the single ethernet port of the A5-V11.
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=39f035fdc70e44b60c2c2f4881bf96d5ad8a2440;p=openwrt%2Fstaging%2Fthess.git

ramips: Don't use a VLAN for the single ethernet port of the A5-V11.

This router only has one ethernet port, so a VLAN is useless here, now that the rt3050 TCP bug that happened without VLANs has been fixed for a very long time.

Add this router to the VLAN-less config that is used by other single-port routers.

Also fix MAC address detection code since this router has no WAN port.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
---

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index c54d46c2db..36b7b76008 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -35,6 +35,7 @@ ramips_setup_interfaces()
 	case $board in
 	3g150b|\
 	3g300m|\
+	a5-v11|\
 	all0256n|\
 	all5002|\
 	all5003|\
@@ -93,10 +94,6 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
 		;;
-	a5-v11)
-		ucidef_add_switch "switch0" \
-			"0:lan" "6t@eth0"
-		;;
 	ar670w|\
 	ar725w|\
 	rt-n15|\
@@ -242,7 +239,6 @@ ramips_setup_macs()
 	local wan_mac=""
 
 	case $board in
-	a5-v11|\
 	bc2|\
 	broadway|\
 	d105|\
@@ -286,6 +282,7 @@ ramips_setup_macs()
 		[ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		;;
+	a5-v11|\
 	ht-tm02)
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		;;