From: Stuart Yoder Date: Thu, 2 Jul 2015 05:59:02 +0000 (+0530) Subject: armv8/fsl-lsch3: partition stream IDs X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=39da644ea86beb8786c09bd536a184a8642c9e10;p=project%2Fbcm63xx%2Fu-boot.git armv8/fsl-lsch3: partition stream IDs Stream IDs on ls2085a devices are not hardwired and are programmed by sw. There are a limited number of stream IDs available, and the partitioning of them is scenario dependent. This header defines the partitioning between legacy, PCI, and DPAA2 devices. Signed-off-by: Stuart Yoder Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun --- diff --git a/arch/arm/include/asm/arch-fsl-lsch3/ls2085a_stream_id.h b/arch/arm/include/asm/arch-fsl-lsch3/ls2085a_stream_id.h new file mode 100644 index 0000000000..5c945309a9 --- /dev/null +++ b/arch/arm/include/asm/arch-fsl-lsch3/ls2085a_stream_id.h @@ -0,0 +1,64 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ +#ifndef __FSL_STREAM_ID_H +#define __FSL_STREAM_ID_H + +/* Stream IDs on ls2085a devices are not hardwired and are + * programmed by sw. There are a limited number of stream IDs + * available, and the partitioning of them is scenario dependent. + * This header defines the partitioning between legacy, PCI, + * and DPAA2 devices. + * + * This partitiong can be customized in this file depending + * on the specific hardware config-- e.g. perhaps not all + * PEX controllers are in use. + * + * On LS2085 stream IDs are programmed in AMQ registers (32-bits) for + * each of the different bus masters. The relationship between + * the AMQ registers and stream IDs is defined in the table below: + * AMQ bit streamID bit + * --------------------------- + * PL[18] 9 + * BMT[17] 8 + * VA[16] 7 + * [15] - + * ICID[14:7] - + * ICID[6:0] 6-0 + * ---------------------------- + */ + +#define AMQ_PL_MASK (0x1 << 18) /* priviledge bit */ +#define AMQ_BMT_MASK (0x1 << 17) /* bypass bit */ + +#define FSL_INVALID_STREAM_ID 0 + +#define FSL_BYPASS_AMQ (AMQ_PL_MASK | AMQ_BMT_MASK) + +/* legacy devices */ +#define FSL_USB1_STREAM_ID 1 +#define FSL_USB2_STREAM_ID 2 +#define FSL_SDMMC_STREAM_ID 3 +#define FSL_SATA1_STREAM_ID 4 +#define FSL_SATA2_STREAM_ID 5 +#define FSL_DMA_STREAM_ID 6 + +/* PCI - programmed in PEXn_LUT by OS */ +/* 4 IDs per controller */ +#define FSL_PEX1_STREAM_ID_START 7 +#define FSL_PEX1_STREAM_ID_END 10 +#define FSL_PEX2_STREAM_ID_START 11 +#define FSL_PEX2_STREAM_ID_END 14 +#define FSL_PEX3_STREAM_ID_START 15 +#define FSL_PEX3_STREAM_ID_END 18 +#define FSL_PEX4_STREAM_ID_START 19 +#define FSL_PEX4_STREAM_ID_END 22 + +/* DPAA2 - set in MC DPC and alloced by MC */ +#define FSL_DPAA2_STREAM_ID_START 23 +#define FSL_DPAA2_STREAM_ID_END 63 + +#endif diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index b2babfbdc7..8e26fa432a 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -474,7 +474,7 @@ int mc_init(void) out_le32(&mc_ccsr_regs->reg_mcfbalr, reg_mcfbalr); out_le32(&mc_ccsr_regs->reg_mcfbahr, (u32)(mc_ram_aligned_base_addr >> 32)); - out_le32(&mc_ccsr_regs->reg_mcfapr, MCFAPR_BYPASS_ICID_MASK); + out_le32(&mc_ccsr_regs->reg_mcfapr, FSL_BYPASS_AMQ); /* * Tell the MC that we want delayed DPL deployment. diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 951410df23..60e5532ef5 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -19,6 +19,7 @@ #define CONFIG_ARM_ERRATA_828024 #define CONFIG_ARM_ERRATA_826974 +#include #include #if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2)) #define CONFIG_SYS_HAS_SERDES diff --git a/include/fsl-mc/fsl_mc.h b/include/fsl-mc/fsl_mc.h index 0e799f5c35..9106f25f68 100644 --- a/include/fsl-mc/fsl_mc.h +++ b/include/fsl-mc/fsl_mc.h @@ -21,10 +21,6 @@ #define GCR1_M2_DE_RST BIT(14) #define GCR1_M_ALL_DE_RST (GCR1_M1_DE_RST | GCR1_M2_DE_RST) #define GSR_FS_MASK 0x3fffffff -#define MCFAPR_PL_MASK (0x1 << 18) -#define MCFAPR_BMT_MASK (0x1 << 17) -#define MCFAPR_BYPASS_ICID_MASK \ - (MCFAPR_PL_MASK | MCFAPR_BMT_MASK) #define SOC_MC_PORTALS_BASE_ADDR ((void __iomem *)0x00080C000000) #define SOC_QBMAN_PORTALS_BASE_ADDR ((void __iomem *)0x000818000000)