From: Ondrej Zary Date: Wed, 13 Jun 2012 20:25:39 +0000 (-0300) Subject: [media] radio-aimslab: Use LM7000 driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=39cca6b821d636f3f19c3f92c91b34a68f76f6d1;p=openwrt%2Fstaging%2Fblogic.git [media] radio-aimslab: Use LM7000 driver Convert radio-aimslab to use generic LM7000 driver. Tested with Reveal RA300. Signed-off-by: Ondrej Zary Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 98e0c8c20312..12c70e876f58 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -37,6 +37,7 @@ #include #include #include "radio-isa.h" +#include "lm7000.h" MODULE_AUTHOR("M. Kirkwood"); MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card."); @@ -72,55 +73,38 @@ static struct radio_isa_card *rtrack_alloc(void) return rt ? &rt->isa : NULL; } -/* The 128+64 on these outb's is to keep the volume stable while tuning. - * Without them, the volume _will_ creep up with each frequency change - * and bit 4 (+16) is to keep the signal strength meter enabled. - */ +#define AIMS_BIT_TUN_CE (1 << 0) +#define AIMS_BIT_TUN_CLK (1 << 1) +#define AIMS_BIT_TUN_DATA (1 << 2) +#define AIMS_BIT_VOL_CE (1 << 3) +#define AIMS_BIT_TUN_STRQ (1 << 4) +/* bit 5 is not connected */ +#define AIMS_BIT_VOL_UP (1 << 6) /* active low */ +#define AIMS_BIT_VOL_DN (1 << 7) /* active low */ -static void send_0_byte(struct radio_isa_card *isa, int on) +void rtrack_set_pins(void *handle, u8 pins) { - outb_p(128+64+16+on+1, isa->io); /* wr-enable + data low */ - outb_p(128+64+16+on+2+1, isa->io); /* clock */ - msleep(1); -} + struct radio_isa_card *isa = handle; + struct rtrack *rt = container_of(isa, struct rtrack, isa); + u8 bits = AIMS_BIT_VOL_DN | AIMS_BIT_VOL_UP | AIMS_BIT_TUN_STRQ; -static void send_1_byte(struct radio_isa_card *isa, int on) -{ - outb_p(128+64+16+on+4+1, isa->io); /* wr-enable+data high */ - outb_p(128+64+16+on+4+2+1, isa->io); /* clock */ - msleep(1); + if (!v4l2_ctrl_g_ctrl(rt->isa.mute)) + bits |= AIMS_BIT_VOL_CE; + + if (pins & LM7000_DATA) + bits |= AIMS_BIT_TUN_DATA; + if (pins & LM7000_CLK) + bits |= AIMS_BIT_TUN_CLK; + if (pins & LM7000_CE) + bits |= AIMS_BIT_TUN_CE; + + outb_p(bits, rt->isa.io); } static int rtrack_s_frequency(struct radio_isa_card *isa, u32 freq) { - int on = v4l2_ctrl_g_ctrl(isa->mute) ? 0 : 8; - int i; - - freq += 171200; /* Add 10.7 MHz IF */ - freq /= 800; /* Convert to 50 kHz units */ - - send_0_byte(isa, on); /* 0: LSB of frequency */ - - for (i = 0; i < 13; i++) /* : frequency bits (1-13) */ - if (freq & (1 << i)) - send_1_byte(isa, on); - else - send_0_byte(isa, on); - - send_0_byte(isa, on); /* 14: test bit - always 0 */ - send_0_byte(isa, on); /* 15: test bit - always 0 */ - - send_0_byte(isa, on); /* 16: band data 0 - always 0 */ - send_0_byte(isa, on); /* 17: band data 1 - always 0 */ - send_0_byte(isa, on); /* 18: band data 2 - always 0 */ - send_0_byte(isa, on); /* 19: time base - always 0 */ - - send_0_byte(isa, on); /* 20: spacing (0 = 25 kHz) */ - send_1_byte(isa, on); /* 21: spacing (1 = 25 kHz) */ - send_0_byte(isa, on); /* 22: spacing (0 = 25 kHz) */ - send_1_byte(isa, on); /* 23: AM/FM (FM = 1, always) */ + lm7000_set_freq(freq, isa, rtrack_set_pins); - outb(0xd0 + on, isa->io); /* volume steady + sigstr */ return 0; }