From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 14 Oct 2010 00:14:59 +0000 (+0000)
Subject: ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3941621dbcc805e37d2582132d03b2b62c220738;p=openwrt%2Fstaging%2Fjow.git

ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)

SVN-Revision: 23432
---

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/dir-600-a1/network b/target/linux/ar71xx/base-files/etc/defconfig/dir-600-a1/network
index 2108d3ae8e..de201bf5ec 100644
--- a/target/linux/ar71xx/base-files/etc/defconfig/dir-600-a1/network
+++ b/target/linux/ar71xx/base-files/etc/defconfig/dir-600-a1/network
@@ -4,12 +4,8 @@ config interface loopback
 	option ipaddr	127.0.0.1
 	option netmask	255.0.0.0
 
-config interface eth
-	option ifname	eth0
-	option proto	none
-
 config interface lan
-	option ifname	'lan1 lan2 lan3 lan4'
+	option ifname	eth0
 	option type	bridge
 	option proto	static
 	option ipaddr	192.168.1.1
@@ -18,3 +14,11 @@ config interface lan
 config interface wan
 	option ifname	eth1
 	option proto	dhcp
+
+config switch eth0
+	option enable_vlan	1
+
+config switch_vlan
+	option device	eth0
+	option vlan	1
+	option ports	"0 1 2 3 4"
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c
index 438d19468d..5c36402e34 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c
@@ -133,7 +133,24 @@ static void __init dir_600_a1_setup(void)
 					ARRAY_SIZE(dir_600_a1_gpio_buttons),
 					dir_600_a1_gpio_buttons);
 
-	ap91_eth_init(NULL);
+	ar71xx_eth1_data.has_ar7240_switch = 1;
+	ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+	ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
+
+	/* WAN port */
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	/* LAN ports */
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.speed = SPEED_1000;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+	ar71xx_add_device_mdio(0x0);
+	ar71xx_add_device_eth(1);
+	ar71xx_add_device_eth(0);
+
 	ap91_pci_init(ee, mac);
 }