From: Nicolas Thill Date: Fri, 27 Jul 2007 03:07:52 +0000 (+0000) Subject: update ar7 to 2.6.22.1 (thanks to Matteo Croce for his great help) X-Git-Tag: reboot~28515 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=39127ef8bfc4b94d499432a517ce7f8cdd63d3d5;p=openwrt%2Fstaging%2Flynxis.git update ar7 to 2.6.22.1 (thanks to Matteo Croce for his great help) SVN-Revision: 8189 --- diff --git a/package/ar7-atm/patches/100-compile_fix.patch b/package/ar7-atm/patches/100-compile_fix.patch index bd081c48e7..2abd433ae2 100644 --- a/package/ar7-atm/patches/100-compile_fix.patch +++ b/package/ar7-atm/patches/100-compile_fix.patch @@ -344,17 +344,13 @@ diff -urN sangam_atm-07.01.00.10/tn7atm.c sangam-atm-0.3/tn7atm.c dgprintf (1, "Leave tn7atm_close\n"); } -@@ -1518,8 +1467,11 @@ +@@ -1518,8 +1467,7 @@ * firewall is on */ dgprintf (3, "pushing the skb...\n"); - - skb->stamp = vcc->timestamp = xtime; -+ { -+ struct timeval tv; -+ do_gettimeofday(&tv); -+ skb_set_timestamp(skb, &tv); -+ } ++ __net_timestamp(skb); xdump ((unsigned char *) skb->data, skb->len, 5); diff --git a/target/linux/ar7-2.6/Makefile b/target/linux/ar7-2.6/Makefile index e6056b2f93..2dd8c82a8b 100644 --- a/target/linux/ar7-2.6/Makefile +++ b/target/linux/ar7-2.6/Makefile @@ -11,7 +11,7 @@ BOARD:=ar7 BOARDNAME:=TI AR7 FEATURES:=squashfs jffs2 atm -LINUX_VERSION:=2.6.21.5 +LINUX_VERSION:=2.6.22.1 define Target/Description Build firmware images for TI AR7 based routers diff --git a/target/linux/ar7-2.6/config/default b/target/linux/ar7-2.6/config/default index f45cdeb346..ecfa805894 100644 --- a/target/linux/ar7-2.6/config/default +++ b/target/linux/ar7-2.6/config/default @@ -6,8 +6,9 @@ CONFIG_AR7_GPIO=y CONFIG_AR7_WDT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ATM_DRIVERS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ATMEL is not set +CONFIG_ATM_DRIVERS=y CONFIG_BASE_SMALL=0 # CONFIG_BCM43XX is not set CONFIG_BITREVERSE=y @@ -46,9 +47,11 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_DDB5477 is not set +CONFIG_DEVPORT=y # CONFIG_DM9000 is not set CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y CONFIG_FIXED_MII_100_FDX=y # CONFIG_FIXED_MII_10_FDX is not set CONFIG_FIXED_PHY=y @@ -57,6 +60,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set # CONFIG_GEN_RTC is not set +CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y # CONFIG_HERMES is not set @@ -80,35 +84,19 @@ CONFIG_LEDS_AR7=y # CONFIG_MACH_VR41XX is not set CONFIG_MIPS=y # CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_EV64120 is not set CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_MIPS_MTX1 is not set CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set # CONFIG_MOMENCO_OCELOT_3 is not set # CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set CONFIG_MTD=y # CONFIG_MTD_ABSENT is not set CONFIG_MTD_AR7_PARTS=y @@ -142,7 +130,6 @@ CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # CONFIG_MTD_ONENAND is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_PCI is not set @@ -157,12 +144,10 @@ CONFIG_MTD_PHYSMAP_START=0x10000000 # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_SLRAM is not set -CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_NETDEV_1000 is not set # CONFIG_NET_PCI is not set CONFIG_NET_SCH_FIFO=y # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NETDEV_1000 is not set -CONFIG_NODES_SHIFT=6 # CONFIG_PAGE_SIZE_16KB is not set CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set @@ -178,6 +163,7 @@ CONFIG_PHYLIB=y # CONFIG_RTC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_PCI=y # CONFIG_SGI_IP22 is not set @@ -198,8 +184,10 @@ CONFIG_SERIAL_8250_PCI=y CONFIG_SWAP_IO_SPACE=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_KGDB=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set @@ -207,34 +195,4 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_TRAD_SIGNALS=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_USB is not set -CONFIG_DEBUG_DEVRES=n -CONFIG_DEBUG_DRIVER=n -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_KOBJECT=n -CONFIG_DEBUG_LIST=n -CONFIG_DEBUG_LOCKING_API_SELFTESTS=n -CONFIG_DEBUG_LOCK_ALLOC=n -CONFIG_DEBUG_MUTEXES=n -CONFIG_DEBUG_RT_MUTEXES=n -CONFIG_DEBUG_SHIRQ=n -CONFIG_DEBUG_SLAB=n -CONFIG_DEBUG_SPINLOCK=n -CONFIG_DEBUG_SPINLOCK_SLEEP=n -CONFIG_DEBUG_STACK_USAGE=n -CONFIG_DEBUG_VM=n -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_EARLY_PRINTK=y -CONFIG_FAULT_INJECTION=n -CONFIG_FORCED_INLINING=y -CONFIG_GDB_CONSOLE=y -CONFIG_IP_DCCP_DEBUG=n -CONFIG_KALLSYMS_ALL=n -CONFIG_KGDB=y -CONFIG_MIPS_UNCACHED=n -CONFIG_PCI_DEBUG=n -CONFIG_PROVE_LOCKING=n -CONFIG_RCU_TORTURE_TEST=n -CONFIG_RT_MUTEX_TESTER=n -CONFIG_RUNTIME_DEBUG=n -CONFIG_SCHEDSTATS=n -CONFIG_TIMER_STATS=n +# CONFIG_VGASTATE is not set diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/memory.c b/target/linux/ar7-2.6/files/arch/mips/ar7/memory.c index 8ff571ce27..99faf217b7 100644 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/memory.c +++ b/target/linux/ar7-2.6/files/arch/mips/ar7/memory.c @@ -60,132 +60,13 @@ static int __init memsize(void) return size; } -#ifdef CONFIG_NEED_MULTIPLE_NODES -static bootmem_data_t node_bootmem_data; -pg_data_t __node_data[1] = { - { - .bdata = &node_bootmem_data - }, -}; -EXPORT_SYMBOL(__node_data); - -unsigned long max_mapnr; -struct page *mem_map; -EXPORT_SYMBOL(max_mapnr); -EXPORT_SYMBOL(mem_map); - -static unsigned long setup_zero_pages(void) -{ - unsigned int order = 3; - unsigned long size; - struct page *page; - - empty_zero_page = __get_free_pages(GFP_KERNEL | __GFP_ZERO, order); - if (!empty_zero_page) - panic("Oh boy, that early out of memory?"); - - page = virt_to_page(empty_zero_page); - split_page(page, order); - while (page < virt_to_page(empty_zero_page + (PAGE_SIZE << order))) { - SetPageReserved(page); - page++; - } - - size = PAGE_SIZE << order; - zero_page_mask = (size - 1) & PAGE_MASK; - - return 1UL << order; -} - -extern void pagetable_init(void); - -void __init paging_init(void) -{ - unsigned long zones_size[MAX_NR_ZONES] = { 0, }; - - pagetable_init(); - - zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn; - - free_area_init_node(0, NODE_DATA(0), zones_size, ARCH_PFN_OFFSET, NULL); -} - -static struct kcore_list kcore_mem, kcore_vmalloc; - -void __init mem_init(void) -{ - unsigned long codesize, reservedpages, datasize, initsize; - unsigned long tmp, ram; - unsigned long kernel_start, kernel_end; - - kernel_start = PFN_DOWN(CPHYSADDR((unsigned long)&_text)); - kernel_end = PFN_UP(CPHYSADDR((unsigned long)&_end)); - for (tmp = min_low_pfn + 1; tmp < kernel_start; tmp++) { - ClearPageReserved(pfn_to_page(tmp)); - init_page_count(pfn_to_page(tmp)); - free_page((unsigned long)__va(tmp << PAGE_SHIFT)); - } - - totalram_pages += free_all_bootmem(); - totalram_pages -= setup_zero_pages(); /* Setup zeroed pages. */ - - reservedpages = ram = 0; - for (tmp = min_low_pfn; tmp <= max_low_pfn; tmp++) { - ram++; - if (PageReserved(pfn_to_page(tmp))) - if ((tmp < kernel_start) || (tmp > kernel_end)) - reservedpages++; - } - num_physpages = ram; - - codesize = (unsigned long) &_etext - (unsigned long) &_text; - datasize = (unsigned long) &_edata - (unsigned long) &_etext; - initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; - - kclist_add(&kcore_mem, __va(min_low_pfn), - (max_low_pfn - min_low_pfn) << PAGE_SHIFT); - kclist_add(&kcore_vmalloc, (void *)VMALLOC_START, - VMALLOC_END - VMALLOC_START); - - printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, " - "%ldk reserved, %ldk data, %ldk init)\n", - (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), - ram << (PAGE_SHIFT-10), - codesize >> 10, - reservedpages << (PAGE_SHIFT-10), - datasize >> 10, - initsize >> 10); -} -#endif - void __init prom_meminit(void) { unsigned long pages; -#ifdef CONFIG_NEED_MULTIPLE_NODES - unsigned long kernel_start, kernel_end; - unsigned long free_pages; - unsigned long bootmap_size; -#endif pages = memsize() >> PAGE_SHIFT; add_memory_region(ARCH_PFN_OFFSET << PAGE_SHIFT, pages << PAGE_SHIFT, BOOT_MEM_RAM); - -#ifdef CONFIG_NEED_MULTIPLE_NODES - kernel_start = PFN_DOWN(CPHYSADDR((unsigned long)&_text)); - kernel_end = PFN_UP(CPHYSADDR((unsigned long)&_end)); - min_low_pfn = ARCH_PFN_OFFSET; - max_low_pfn = ARCH_PFN_OFFSET + pages; - max_mapnr = max_low_pfn; - free_pages = pages - (kernel_end - min_low_pfn); - bootmap_size = init_bootmem_node(NODE_DATA(0), kernel_end, - ARCH_PFN_OFFSET, max_low_pfn); - - free_bootmem(PFN_PHYS(kernel_end), free_pages << PAGE_SHIFT); - memory_present(0, min_low_pfn, max_low_pfn); - reserve_bootmem(PFN_PHYS(kernel_end), bootmap_size); - mem_map = NODE_DATA(0)->node_mem_map; -#endif } void __init prom_free_prom_memory(void) diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c b/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c index c61e20a6c1..b9f7d0e9f9 100644 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c +++ b/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c @@ -32,6 +32,7 @@ #include #include #include +#include #include struct plat_vlynq_data { diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/prom.c b/target/linux/ar7-2.6/files/arch/mips/ar7/prom.c index 08904dee71..28397427d0 100644 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/prom.c +++ b/target/linux/ar7-2.6/files/arch/mips/ar7/prom.c @@ -33,6 +33,7 @@ #include #include +#include #define MAX_ENTRY 80 @@ -41,72 +42,6 @@ struct env_var { char *value; }; -struct psp_chip_map { - u16 chip; - char *names[50]; -}; - -/* I hate this. No. *I* *HATE* *THIS* */ -static __initdata struct psp_chip_map psp_chip_map[] = { - { - .chip = AR7_CHIP_7100, - .names = { - "dummy", "cpufrequency", "memsize", - "flashsize", "modetty0", "modetty1", "prompt", - "bootcfg", "maca", "macb", "usb_rndis_mac", - "macap", "my_ipaddress", "server_ipaddress", - "bline_maca", "bline_macb", "bline_rndis", - "bline_atm", "usb_pid", "usb_vid", - "usb_eppolli", "gateway_ipaddress", - "subnet_mask", "usb_serial", "usb_board_mac", - "remote_user", "remote_pass", "remote_dir", - "sysfrequency", "link_timeout", "mac_port", - "path", "hostname", "tftpcfg", "buildops", - "tftp_fo_fname", "tftp_fo_ports", - "console_state", "mipsfrequency", - }, - }, - { - .chip = AR7_CHIP_7200, - .names = { - "dummy", "cpufrequency", "memsize", - "flashsize", "modetty0", "modetty1", "prompt", - "bootcfg", "maca", "macb", "usb_rndis_mac", - "macap", "my_ipaddress", "server_ipaddress", - "bline_maca", "bline_macb", "bline_rndis", - "bline_atm", "usb_pid", "usb_vid", - "usb_eppolli", "gateway_ipaddress", - "subnet_mask", "usb_serial", "usb_board_mac", - "remote_user", "remote_pass", "remote_dir", - "sysfrequency", "link_timeout", "mac_port", - "path", "hostname", "tftpcfg", "buildops", - "tftp_fo_fname", "tftp_fo_ports", - "console_state", "mipsfrequency", - }, - }, - { - .chip = AR7_CHIP_7300, - .names = { - "dummy", "cpufrequency", "memsize", - "flashsize", "modetty0", "modetty1", "prompt", - "bootcfg", "maca", "macb", "usb_rndis_mac", - "macap", "my_ipaddress", "server_ipaddress", - "bline_maca", "bline_macb", "bline_rndis", - "bline_atm", "usb_pid", "usb_vid", - "usb_eppolli", "gateway_ipaddress", - "subnet_mask", "usb_serial", "usb_board_mac", - "remote_user", "remote_pass", "remote_dir", - "sysfrequency", "link_timeout", "mac_port", - "path", "hostname", "tftpcfg", "buildops", - "tftp_fo_fname", "tftp_fo_ports", - "console_state", "mipsfrequency", - }, - }, - { - .chip = 0x0, - }, -}; - static struct env_var adam2_env[MAX_ENTRY] = { { 0, }, }; char * prom_getenv(char *name) @@ -155,15 +90,71 @@ struct psbl_rec { static __initdata char psp_env_version[] = "TIENV0.8"; -struct psp_env_var { - unsigned char num; - unsigned char ctrl; - unsigned short csum; - unsigned char len; - unsigned char data[11]; +struct psp_env_chunk { + u8 num; + u8 ctrl; + u16 csum; + u8 len; + char data[11]; +} __attribute__ ((packed)); + +struct psp_var_map_entry { + u8 num; + char *value; +}; + +static struct psp_var_map_entry psp_var_map[] = { + { 1, "cpufrequency" }, + { 2, "memsize" }, + { 3, "flashsize" }, + { 4, "modetty0" }, + { 5, "modetty1" }, + { 8, "maca" }, + { 9, "macb" }, + { 28, "sysfrequency" }, + { 38, "mipsfrequency" }, }; -static char psp_env_data[2048] = { 0, }; +/* + +Well-known variable (num is looked up in table above for matching variable name) +Example: cpufrequency=211968000 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ +| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF | ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ + +Name=Value pair in a single chunk +Example: NAME=VALUE ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ +| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0 | ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ + +Name=Value pair in 2 chunks (len is the number of chunks) +Example: bootloaderVersion=1.3.7.15 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ +| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V | ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ +| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0 | ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ + +Data is padded with 0xFF + +*/ + +#define PSP_ENV_SIZE 4096 + +static char psp_env_data[PSP_ENV_SIZE] = { 0, }; + +static char * __init lookup_psp_var_map(u8 num) +{ + int i; + + for (i = 0; i < sizeof(psp_var_map); i++) + if (psp_var_map[i].num == num) + return psp_var_map[i].value; + + return NULL; +} static void __init add_adam2_var(char *name, char *value) { @@ -180,41 +171,29 @@ static void __init add_adam2_var(char *name, char *value) } } -static int __init parse_psp_env(void *start) +static int __init parse_psp_env(void *psp_env_base) { - int i, j; - u16 chip; - struct psp_chip_map *map; - char *src, *dest, *name, *value; - struct psp_env_var *vars = start; - - chip = ar7_chip_id(); - for (map = psp_chip_map; map->chip; map++) - if (map->chip == chip) - break; + int i, n; + char *name, *value; + struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data; - if (!map->chip) - return -EINVAL; + memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE); i = 1; - j = 0; - dest = psp_env_data; - while (vars[i].num < 0xff) { - src = vars[i].data; - if (vars[i].num) { - strcpy(dest, map->names[vars[i].num]); - name = dest; + n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk); + while (i < n) { + if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n)) + break; + value = chunks[i].data; + if (chunks[i].num) { + name = lookup_psp_var_map(chunks[i].num); } else { - strcpy(dest, src); - name = dest; - src += strlen(src) + 1; - } - dest += strlen(dest) + 1; - strcpy(dest, src); - value = dest; - dest += strlen(dest) + 1; - add_adam2_var(name, value); - i += vars[i].len; + name = value; + value += strlen(name) + 1; + } + if (name) + add_adam2_var(name, value); + i += chunks[i].len; } return 0; } diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/setup.c b/target/linux/ar7-2.6/files/arch/mips/ar7/setup.c index 6c9c1bf7bd..4abc39f1df 100644 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/setup.c +++ b/target/linux/ar7-2.6/files/arch/mips/ar7/setup.c @@ -116,6 +116,9 @@ void __init plat_mem_setup(void) ioport_resource.end = ~0; iomem_resource.start = 0; iomem_resource.end = ~0; + + printk("%s, ID: 0x%04x, Revision: 0x%02x\n", get_system_type(), + ar7_chip_id(), ar7_chip_rev()); } console_initcall(ar7_init_console); diff --git a/target/linux/ar7-2.6/files/drivers/net/cpmac.c b/target/linux/ar7-2.6/files/drivers/net/cpmac.c index 1be7cb8ddd..7d46677080 100644 --- a/target/linux/ar7-2.6/files/drivers/net/cpmac.c +++ b/target/linux/ar7-2.6/files/drivers/net/cpmac.c @@ -1173,9 +1173,9 @@ int __devinit cpmac_init(void) #warning FIXME: unhardcode gpio&reset bits ar7_gpio_disable(26); ar7_gpio_disable(27); - ar7_device_reset(17); - ar7_device_reset(21); - ar7_device_reset(26); + ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); + ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); + ar7_device_reset(AR7_RESET_BIT_EPHY); cpmac_mii.reset(&cpmac_mii); diff --git a/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h b/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h index 3e6a50c324..e8e32a0b83 100644 --- a/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h +++ b/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h @@ -53,7 +53,10 @@ #define AR7_RESET_SOFTWARE 0x4 #define AR7_RESET_STATUS 0x8 -#define AR7_RESET_BIT_MDIO 22 +#define AR7_RESET_BIT_CPMAC_LO 17 +#define AR7_RESET_BIT_CPMAC_HI 21 +#define AR7_RESET_BIT_MDIO 22 +#define AR7_RESET_BIT_EPHY 26 /* GPIO control registers */ #define AR7_GPIO_INPUT 0x0 @@ -83,8 +86,6 @@ struct plat_dsl_data { int reset_bit_sar; }; -extern char *prom_getenv(char *envname); - extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; static inline u16 ar7_chip_id(void) diff --git a/target/linux/ar7-2.6/files/include/asm-mips/ar7/prom.h b/target/linux/ar7-2.6/files/include/asm-mips/ar7/prom.h index bb0b0c4d5b..10d6235102 100644 --- a/target/linux/ar7-2.6/files/include/asm-mips/ar7/prom.h +++ b/target/linux/ar7-2.6/files/include/asm-mips/ar7/prom.h @@ -21,7 +21,6 @@ #ifndef __PROM_H__ #define __PROM_H__ -extern void prom_init(void); extern char *prom_getenv(char *name); extern void prom_printf(char *fmt, ...); diff --git a/target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch b/target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch index 7d99e9be3f..0ab93b6caa 100644 --- a/target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch +++ b/target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch @@ -15,8 +15,8 @@ diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_KGDB + select SYS_SUPPORTS_LITTLE_ENDIAN -+ select NEED_MULTIPLE_NODES + select GENERIC_GPIO + select ZONE_DMA + @@ -24,7 +24,7 @@ diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig bool "Alchemy processor based machines" diff -urN linux-2.6.22/arch/mips/kernel/setup.c linux-2.6.22.new/arch/mips/kernel/setup.c ---- linux-2.6.22/arch/mips/kernel/setup.c 2007-07-09 01:32:17.000000000 +0200 +-- linux-2.6.22/arch/mips/kernel/setup.c 2007-07-09 01:32:17.000000000 +0200 +++ linux-2.6.22.new/arch/mips/kernel/setup.c 2007-07-11 02:32:39.000000000 +0200 @@ -258,7 +258,7 @@ * Initialize the bootmem allocator. It also setup initrd related data diff --git a/target/linux/ar7-2.6/patches/100-board_support.patch b/target/linux/ar7-2.6/patches/100-board_support.patch deleted file mode 100644 index 9702efa8ec..0000000000 --- a/target/linux/ar7-2.6/patches/100-board_support.patch +++ /dev/null @@ -1,106 +0,0 @@ -diff -Nru linux-2.6.19.2/arch/mips/Kconfig linux-ar7/arch/mips/Kconfig ---- linux-2.6.19.2/arch/mips/Kconfig 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/arch/mips/Kconfig 2007-01-29 21:52:21.000000000 +0700 -@@ -16,6 +16,21 @@ - prompt "System type" - default SGI_IP22 - -+config AR7 -+ bool "Texas Instruments AR7" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_KGDB -+ select NEED_MULTIPLE_NODES -+ select GENERIC_GPIO -+ - config MIPS_MTX1 - bool "4G Systems MTX-1 board" - select DMA_NONCOHERENT -diff -Nru linux-2.6.19.2/arch/mips/Makefile linux-ar7/arch/mips/Makefile ---- linux-2.6.19.2/arch/mips/Makefile 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/arch/mips/Makefile 2007-01-29 21:52:21.000000000 +0700 -@@ -158,6 +158,13 @@ - # - - # -+# Texas Instruments AR7 -+# -+core-$(CONFIG_AR7) += arch/mips/ar7/ -+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7 -+load-$(CONFIG_AR7) += 0xffffffff94100000 -+ -+# - # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. - # - core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -diff -Nru linux-2.6.19.2/arch/mips/kernel/setup.c linux-ar7/arch/mips/kernel/setup.c ---- linux-2.6.19.2orig/arch/mips/kernel/setup.c 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/arch/mips/kernel/setup.c 2007-03-04 22:32:13.000000000 +0700 -@@ -236,7 +236,7 @@ - * Initialize the bootmem allocator. It also setup initrd related data - * if needed. - */ --#ifdef CONFIG_SGI_IP27 -+#ifdef CONFIG_NEED_MULTIPLE_NODES - - static void __init bootmem_init(void) - { -@@ -244,7 +244,7 @@ - finalize_initrd(); - } - --#else /* !CONFIG_SGI_IP27 */ -+#else /* !CONFIG_NEED_MULTIPLE_NODES */ - - static void __init bootmem_init(void) - { -@@ -349,7 +349,7 @@ - finalize_initrd(); - } - --#endif /* CONFIG_SGI_IP27 */ -+#endif /* CONFIG_NEED_MULTIPLE_NODES */ - - /* - * arch_mem_init - initialize memory managment subsystem -diff -Nru linux-2.6.19.2/arch/mips/kernel/traps.c linux-ar7/arch/mips/kernel/traps.c ---- linux-2.6.19.2/arch/mips/kernel/traps.c 2007-01-11 02:10:37.000000000 +0700 -+++ linux-ar7/arch/mips/kernel/traps.c 2007-03-15 13:19:19.000000000 +0700 -@@ -1072,11 +1072,6 @@ - unsigned long exception_handlers[32]; - unsigned long vi_handlers[64]; - --/* -- * As a side effect of the way this is implemented we're limited -- * to interrupt handlers in the address range from -- * KSEG0 <= x < KSEG0 + 256mb on the Nevada. Oh well ... -- */ - void *set_except_vector(int n, void *addr) - { - unsigned long handler = (unsigned long) addr; -@@ -1084,9 +1079,15 @@ - - exception_handlers[n] = handler; - if (n == 0 && cpu_has_divec) { -- *(volatile u32 *)(ebase + 0x200) = 0x08000000 | -- (0x03ffffff & (handler >> 2)); -- flush_icache_range(ebase + 0x200, ebase + 0x204); -+ /* lui k0, 0x0000 */ -+ *(volatile u32 *)(CAC_BASE+0x200) = 0x3c1a0000 | (handler >> 16); -+ /* ori k0, 0x0000 */ -+ *(volatile u32 *)(CAC_BASE+0x204) = 0x375a0000 | (handler & 0xffff); -+ /* jr k0 */ -+ *(volatile u32 *)(CAC_BASE+0x208) = 0x03400008; -+ /* nop */ -+ *(volatile u32 *)(CAC_BASE+0x20C) = 0x00000000; -+ flush_icache_range(CAC_BASE+0x200, CAC_BASE+0x210); - } - return (void *)old_handler; - } diff --git a/target/linux/ar7-2.6/patches/110-flash.patch b/target/linux/ar7-2.6/patches/110-flash.patch deleted file mode 100644 index b104067540..0000000000 --- a/target/linux/ar7-2.6/patches/110-flash.patch +++ /dev/null @@ -1,39 +0,0 @@ -diff -Nru linux-2.6.19.2/drivers/mtd/Kconfig linux-ar7/drivers/mtd/Kconfig ---- linux-2.6.19.2/drivers/mtd/Kconfig 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/Kconfig 2007-02-03 22:47:10.000000000 +0700 -@@ -152,6 +152,12 @@ - for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. - -+config MTD_AR7_PARTS -+ tristate "TI AR7 partitioning support" -+ depends on MTD_PARTITIONS -+ ---help--- -+ TI AR7 partitioning support -+ - comment "User Modules And Translation Layers" - depends on MTD - -diff -Nru linux-2.6.19.2/drivers/mtd/Makefile linux-ar7/drivers/mtd/Makefile ---- linux-2.6.19.2/drivers/mtd/Makefile 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/Makefile 2007-02-03 22:02:27.000000000 +0700 -@@ -12,6 +12,7 @@ - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o -+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o -diff -Nru linux-2.6.19.2/drivers/mtd/maps/physmap.c linux-ar7/drivers/mtd/maps/physmap.c ---- linux-2.6.19.2/drivers/mtd/maps/physmap.c 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/maps/physmap.c 2007-02-03 21:57:11.000000000 +0700 -@@ -74,7 +74,7 @@ - - static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; - #ifdef CONFIG_MTD_PARTITIONS --static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL }; - #endif - - static int physmap_flash_probe(struct platform_device *dev) diff --git a/target/linux/ar7-2.6/patches/120-gpio_chrdev.patch b/target/linux/ar7-2.6/patches/120-gpio_chrdev.patch deleted file mode 100644 index 41a8b8e02f..0000000000 --- a/target/linux/ar7-2.6/patches/120-gpio_chrdev.patch +++ /dev/null @@ -1,30 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/char/Kconfig linux-2.6.19.2-ar7/drivers/char/Kconfig ---- linux-2.6.19.2-orig/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/Kconfig 2007-02-19 01:22:23.000000000 +0100 -@@ -920,6 +920,15 @@ - To compile this driver as a module, choose M here: the - module will be called mwave. - -+config AR7_GPIO -+ tristate "TI AR7 GPIO Support" -+ depends on AR7 -+ help -+ Give userspace access to the GPIO pins on the Texas Instruments AR7 -+ processors. -+ -+ If compiled as a module, it will be called ar7_gpio. -+ - config SCx200_GPIO - tristate "NatSemi SCx200 GPIO Support" - depends on SCx200 -diff -ruN linux-2.6.19.2-orig/drivers/char/Makefile linux-2.6.19.2-ar7/drivers/char/Makefile ---- linux-2.6.19.2-orig/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/Makefile 2007-02-19 01:22:23.000000000 +0100 -@@ -83,6 +83,7 @@ - obj-$(CONFIG_PPDEV) += ppdev.o - obj-$(CONFIG_NWBUTTON) += nwbutton.o - obj-$(CONFIG_NWFLASH) += nwflash.o -+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o - obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o - obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o - obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o diff --git a/target/linux/ar7-2.6/patches/130-leds.patch b/target/linux/ar7-2.6/patches/130-leds.patch deleted file mode 100644 index 261b712196..0000000000 --- a/target/linux/ar7-2.6/patches/130-leds.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/leds/Kconfig linux-2.6.19.2-ar7/drivers/leds/Kconfig ---- linux-2.6.19.2-orig/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/leds/Kconfig 2007-02-24 02:30:48.000000000 +0100 -@@ -19,6 +19,12 @@ - - comment "LED drivers" - -+config LEDS_AR7 -+ tristate "LED Support for the TI AR7" -+ depends LEDS_CLASS && AR7 -+ help -+ This option enables support for the LEDs on TI AR7. -+ - config LEDS_CORGI - tristate "LED Support for the Sharp SL-C7x0 series" - depends LEDS_CLASS && PXA_SHARP_C7xx -diff -ruN linux-2.6.19.2-orig/drivers/leds/Makefile linux-2.6.19.2-ar7/drivers/leds/Makefile ---- linux-2.6.19.2-orig/drivers/leds/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/leds/Makefile 2007-02-24 02:29:44.000000000 +0100 -@@ -5,6 +5,7 @@ - obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o - - # LED Platform Drivers -+obj-$(CONFIG_LEDS_AR7) += leds-ar7.o - obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o - obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o - obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o diff --git a/target/linux/ar7-2.6/patches/140-watchdog.patch b/target/linux/ar7-2.6/patches/140-watchdog.patch deleted file mode 100644 index 163df40ba6..0000000000 --- a/target/linux/ar7-2.6/patches/140-watchdog.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig ---- linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig 2007-02-26 12:49:29.000000000 +0100 -@@ -544,6 +544,12 @@ - - # MIPS Architecture - -+config AR7_WDT -+ tristate "TI AR7 Watchdog Timer" -+ depends on WATCHDOG && AR7 -+ help -+ Hardware driver for the TI AR7 Watchdog Timer. -+ - config INDYDOG - tristate "Indy/I2 Hardware Watchdog" - depends on WATCHDOG && SGI_IP22 -diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Makefile linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile ---- linux-2.6.19.2-orig/drivers/char/watchdog/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile 2007-02-26 12:46:36.000000000 +0100 -@@ -71,6 +71,7 @@ - obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o - - # MIPS Architecture -+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_INDYDOG) += indydog.o - - # S390 Architecture diff --git a/target/linux/ar7-2.6/patches/200-ethernet_driver.patch b/target/linux/ar7-2.6/patches/200-ethernet_driver.patch deleted file mode 100644 index ca603ad610..0000000000 --- a/target/linux/ar7-2.6/patches/200-ethernet_driver.patch +++ /dev/null @@ -1,30 +0,0 @@ -diff -Nru linux-2.6.19.2/drivers/net/Kconfig linux-ar7/drivers/net/Kconfig ---- linux-2.6.19.2/drivers/net/Kconfig 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/net/Kconfig 2007-01-29 21:52:22.000000000 +0700 -@@ -1777,6 +1777,15 @@ - workstations. - See . - -+config CPMAC -+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" -+ depends on NET_ETHERNET && EXPERIMENTAL && AR7 -+ select PHYLIB -+ select FIXED_PHY -+ select FIXED_MII_100_FDX -+ help -+ TI AR7 CPMAC Ethernet support -+ - config NET_POCKET - bool "Pocket and portable adapters" - depends on NET_ETHERNET && PARPORT -diff -Nru linux-2.6.19.2/drivers/net/Makefile linux-ar7/drivers/net/Makefile ---- linux-2.6.19.2/drivers/net/Makefile 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/net/Makefile 2007-01-29 21:52:22.000000000 +0700 -@@ -148,6 +148,7 @@ - obj-$(CONFIG_8139TOO) += 8139too.o - obj-$(CONFIG_ZNET) += znet.o - obj-$(CONFIG_LAN_SAA9730) += saa9730.o -+obj-$(CONFIG_CPMAC) += cpmac.o - obj-$(CONFIG_DEPCA) += depca.o - obj-$(CONFIG_EWRK3) += ewrk3.o - obj-$(CONFIG_ATP) += atp.o diff --git a/target/linux/ar7-2.6/patches/210-phy_fixed.patch b/target/linux/ar7-2.6/patches/210-phy_fixed.patch deleted file mode 100644 index 0ae2282c71..0000000000 --- a/target/linux/ar7-2.6/patches/210-phy_fixed.patch +++ /dev/null @@ -1,94 +0,0 @@ -Index: linux-2.6.21.4/drivers/net/phy/fixed.c -=================================================================== ---- linux-2.6.21.4.orig/drivers/net/phy/fixed.c 2007-06-11 16:30:06.418483448 +0200 -+++ linux-2.6.21.4/drivers/net/phy/fixed.c 2007-06-11 16:30:11.156763120 +0200 -@@ -187,6 +187,19 @@ - .driver = { .owner = THIS_MODULE,}, - }; - -+static void fixed_mdio_release (struct device * dev) -+{ -+ struct phy_device *phydev = container_of(dev, struct phy_device, dev); -+ struct mii_bus *bus = phydev->bus; -+ struct fixed_info *fixed = bus->priv; -+ -+ kfree(phydev); -+ kfree(bus->dev); -+ kfree(bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+} -+ - /*----------------------------------------------------------------------------- - * This func is used to create all the necessary stuff, bind - * the fixed phy driver and register all it on the mdio_bus_type. -@@ -221,6 +234,12 @@ - } - - fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL); -+ if (NULL == fixed->regs) { -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed); -+ return -ENOMEM; -+ } - fixed->regs_num = MII_REGS_NUM; - fixed->phy_status.speed = speed; - fixed->phy_status.duplex = duplex; -@@ -249,8 +268,11 @@ - fixed->phydev = phydev; - - if(NULL == phydev) { -- err = -ENOMEM; -- goto device_create_fail; -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+ return -ENOMEM; - } - - phydev->irq = PHY_IGNORE_INTERRUPT; -@@ -262,8 +284,34 @@ - else - snprintf(phydev->dev.bus_id, BUS_ID_SIZE, - "fixed@%d:%d", speed, duplex); -+ - phydev->bus = new_bus; - -+#if 1 -+ phydev->dev.driver = &fixed_mdio_driver.driver; -+ phydev->dev.release = fixed_mdio_release; -+ -+ err = phydev->dev.driver->probe(&phydev->dev); -+ if(err < 0) { -+ printk(KERN_ERR "Phy %s: problems with fixed driver\n", -+ phydev->dev.bus_id); -+ kfree(phydev); -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+ return err; -+ } -+ -+ down_write(&phydev->dev.bus->subsys.rwsem); -+ err = device_register(&phydev->dev); -+ if(err) { -+ printk(KERN_ERR "Phy %s failed to register\n", -+ phydev->dev.bus_id); -+ } -+ -+ return 0; -+#else - err = device_register(&phydev->dev); - if(err) { - printk(KERN_ERR "Phy %s failed to register\n", -@@ -306,6 +354,7 @@ - kfree(fixed); - - return err; -+#endif - } - - diff --git a/target/linux/ar7-2.6/patches/500-serial_kludge.patch b/target/linux/ar7-2.6/patches/500-serial_kludge.patch deleted file mode 100644 index 959c5cfe4c..0000000000 --- a/target/linux/ar7-2.6/patches/500-serial_kludge.patch +++ /dev/null @@ -1,52 +0,0 @@ -diff -Nru linux-2.6.19.2/include/linux/serialP.h linux-ar7/include/linux/serialP.h ---- linux-2.6.19.2/include/linux/serialP.h 2007-01-17 01:24:01.000000000 +0700 -+++ linux-ar7/include/linux/serialP.h 2007-03-22 22:36:48.000000000 +0700 -@@ -135,6 +135,9 @@ - * the interrupt line _up_ instead of down, so if we register the IRQ - * while the UART is in that state, we die in an IRQ storm. */ - #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) -+#elif defined(CONFIG_AR7) -+/* This is how it is set up by bootloader... */ -+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 | UART_MCR_RTS | UART_MCR_DTR) - #else - #define ALPHA_KLUDGE_MCR 0 - #endif -diff -Nru linux-2.6.19.2/include/linux/serial_core.h linux-ar7/include/linux/serial_core.h ---- linux-2.6.19.2/include/linux/serial_core.h 2007-01-11 02:10:37.000000000 +0700 -+++ linux-ar7/include/linux/serial_core.h 2007-03-22 22:50:13.000000000 +0700 -@@ -39,7 +39,8 @@ - #define PORT_RSA 13 - #define PORT_NS16550A 14 - #define PORT_XSCALE 15 --#define PORT_MAX_8250 15 /* max port ID */ -+#define PORT_AR7 16 -+#define PORT_MAX_8250 16 /* max port ID */ - - /* - * ARM specific type numbers. These are not currently guaranteed -diff -Nru linux-2.6.19.2/drivers/serial/8250.c linux-ar7/drivers/serial/8250.c ---- linux-2.6.19.2/drivers/serial/8250.c 2007-01-11 02:10:37.000000000 +0700 -+++ linux-ar7/drivers/serial/8250.c 2007-03-22 22:45:17.000000000 +0700 -@@ -251,6 +251,13 @@ - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_UUE, - }, -+ [PORT_AR7] = { -+ .name = "TI-AR7", -+ .fifo_size = 16, -+ .tx_loadsz = 16, -+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, -+ .flags = UART_CAP_FIFO | UART_CAP_AFE, -+ }, - }; - - #ifdef CONFIG_SERIAL_8250_AU1X00 -@@ -2243,7 +2250,7 @@ - { - struct uart_8250_port *up = (struct uart_8250_port *)port; - -- wait_for_xmitr(up, UART_LSR_THRE); -+ wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_TX, ch); - } - diff --git a/target/linux/ar7-2.6/patches/900-git-fix.diff b/target/linux/ar7-2.6/patches/900-git-fix.diff deleted file mode 100644 index 2c5323a9d5..0000000000 --- a/target/linux/ar7-2.6/patches/900-git-fix.diff +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-2.6.19.orig/scripts/setlocalversion 2006-11-30 04:57:37.000000000 +0700 -+++ linux-2.6.19/scripts/setlocalversion 2006-12-25 12:50:53.000000000 +0700 -@@ -1,6 +1,8 @@ - #!/bin/sh - # Print additional version information for non-release trees. - -+exit 0 -+ - usage() { - echo "Usage: $0 [srctree]" >&2 - exit 1