From: Vignesh R Date: Mon, 11 Jun 2018 06:09:56 +0000 (+0530) Subject: pwm: tiehrpwm: Fix disabling of output of PWMs X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=38dabd91ff0bde33352ca3cc65ef515599b77a05;p=openwrt%2Fstaging%2Fblogic.git pwm: tiehrpwm: Fix disabling of output of PWMs pwm-tiehrpwm driver disables PWM output by putting it in low output state via active AQCSFRC register in ehrpwm_pwm_disable(). But, the AQCSFRC shadow register is not updated. Therefore, when shadow AQCSFRC register is re-enabled in ehrpwm_pwm_enable() (say to enable second PWM output), previous settings are lost as shadow register value is loaded into active register. This results in things like PWMA getting enabled automatically, when PWMB is enabled and vice versa. Fix this by updating AQCSFRC shadow register as well during ehrpwm_pwm_disable(). Fixes: 19891b20e7c2 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM") Cc: stable@vger.kernel.org Signed-off-by: Vignesh R Signed-off-by: Thierry Reding --- diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index 768176f54d5e..f7b8a86fa5c5 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -381,6 +381,8 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) aqcsfrc_mask = AQCSFRC_CSFA_MASK; } + /* Update shadow register first before modifying active register */ + ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val); /* * Changes to immediate action on Action Qualifier. This puts * Action Qualifier control on PWM output from next TBCLK