From: Antonio Nino Diaz Date: Fri, 23 Feb 2018 11:01:31 +0000 (+0000) Subject: Fix Foundation FVP instructions in User Guide X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=38d96de6062c1588f905818f94e137810522f4ea;p=project%2Fbcm63xx%2Fatf.git Fix Foundation FVP instructions in User Guide The Arm Trusted Firmware is built by default for ARMv8-A version 8.0. However, the Foundation FVP runs by default in the highest version of the architecture it supports. This causes problems when trying to run the Arm Trusted Firmware on it. This patch adds a note to the User Guide about this problem. Change-Id: I0220fe1a9c66c2292149ad4a7ffe5e27ba08ab28 Signed-off-by: Antonio Nino Diaz --- diff --git a/docs/user-guide.rst b/docs/user-guide.rst index 8cf15b8e..c9e87488 100644 --- a/docs/user-guide.rst +++ b/docs/user-guide.rst @@ -1582,6 +1582,7 @@ The following ``Foundation_Platform`` parameters should be used to boot Linux wi /Foundation_Platform \ --cores=4 \ + --arm-v8.0 \ --secure-memory \ --visualization \ --gicv3 \ @@ -1600,6 +1601,12 @@ Notes: and enable the GICv3 device in the model. Note that without this option, the Foundation FVP defaults to legacy (Versatile Express) memory map which is not supported by ARM Trusted Firmware. +- In order for the Arm Trusted Firmware to run correctly on the Foundation + Model the architecture versions must match. The Foundation FVP defaults to + the highest v8.x version it supports but the default build for Arm Trusted + Firmware is for v8.0. To avoid issues either start the Foundation Model to + use v8.0 architecture using the ``--arm-v8.0`` option or build Arm Trusted + Firmware with an appropriate value for ``ARM_ARCH_MINOR``. Running on the AEMv8 Base FVP with reset to BL1 entrypoint ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~