From: Hanqing Wong Date: Sat, 11 Mar 2017 07:44:33 +0000 (+0800) Subject: ramips: add support for Netgear R6220 X-Git-Tag: v18.06.0-rc1~3391 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=38bee61dab029a7608088f64da71c19cfc8cf267;p=openwrt%2Fstaging%2Fxback.git ramips: add support for Netgear R6220 This patch adds support for the Netgear R6220, aka Netgear AC1200 and R6220-100NAS. Specification: - SoC: MediaTek MT7621ST (880 MHz) - Falsh: 128 MiB (Macronix MX30LF1G08AA-TI) - RAM: 128 MiB (Nanya NT5CB64M16FP-DH) - Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - Serial baud rate of Bootloader and factory firmware: 57600 Installation through telnet: - Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port on the router. - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug (login if required, default: admin password) - You will see "Debug Enabled!" - Telnet 192.168.1.1 and login with "root" - ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for example. - cd /mnt/shares/myUdisk - mtd_write write rootfs.bin Rootfs - mtd_write write kernel.bin Kernel - reboot nmrpflash can be used to recover to the netgear firmware if a broken image was flashed. Signed-off-by: Hanqing Wong --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index e01ba5f602..66f0c97437 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -291,6 +291,11 @@ px-4885) set_wifi_led "$board:orange:wifi" set_usb_led "$board:blue:storage" ;; +r6220) + ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2 + set_wifi_led "$board:green:wifi" + set_usb_led "$board:green:usb" + ;; re6500) ucidef_set_led_default "power" "power" "$board:white:power" "1" ucidef_set_led_default "wifi" "wifi" "$board:orange:wifi" "1" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 9d3a9de292..828f461c4f 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -95,6 +95,7 @@ ramips_setup_interfaces() pbr-m1|\ psg1208|\ psg1218|\ + r6220|\ sap-g3200u3|\ sk-wb8|\ vr500|\ @@ -394,6 +395,10 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_binary factory 40) wan_mac=$(mtd_get_mac_binary factory 46) ;; + r6220) + wan_mac=$(mtd_get_mac_binary factory 4) + lan_mac=$(macaddr_add "$wan_mac" 1) + ;; rt-n56u) lan_mac=$(cat /sys/class/net/eth0/address) lan_mac=$(macaddr_setbit_la "$lan_mac") diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 54961371f8..3bdd2cf1c1 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -33,6 +33,7 @@ get_status_led() { nbg-419n|\ nbg-419n2|\ pwh2004|\ + r6220|\ vr500|\ wnce2001|\ wndr3700v5|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 91ce5fbd49..cdebab47cd 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -412,6 +412,9 @@ ramips_board_detect() { *"Q7") name="zte-q7" ;; + *"R6220") + name="r6220" + ;; *"RB750Gr3") name="rb750gr3" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 3245e2c1c8..7b12d97a00 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -229,7 +229,8 @@ platform_check_image() { } return 0 ;; - hc5962) + hc5962|\ + r6220) # these boards use metadata images return 0 ;; @@ -266,6 +267,7 @@ platform_pre_upgrade() { case "$board" in hc5962|\ + r6220|\ ubnt-erx) nand_do_upgrade "$ARGV" ;; diff --git a/target/linux/ramips/dts/R6220.dts b/target/linux/ramips/dts/R6220.dts new file mode 100644 index 0000000000..72c6fc7d5a --- /dev/null +++ b/target/linux/ramips/dts/R6220.dts @@ -0,0 +1,156 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include +#include + +/ { + model = "Netgear R6220"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "r6220:green:power"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "r6220:green:usb"; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "r6220:green:wan"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "r6220:green:wifi"; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "r6220:green:wps"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + wifi { + label = "wifi"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usbpower { + gpio-export,name = "usbpower"; + gpio-export,output = <1>; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "SC PID"; + reg = <0x100000 0x100000>; + read-only; + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "ubi"; + reg = <0x600000 0x1c00000>; + }; + + factory: partition@2e00000 { + label = "factory"; + reg = <0x2e00000 0x100000>; + read-only; + }; + + partition@4200000 { + label = "reserved"; + reg = <0x4200000 0x3c00000>; + }; +}; + +&pcie { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x00000004>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uart3", "jtag"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 6704f84dc5..a90cf17aa4 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -118,6 +118,23 @@ define Device/pbr-m1 endef TARGET_DEVICES += pbr-m1 +define Device/r6220 + DTS := R6220 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 4096k + KERNEL := $(KERNEL_DTB) | uImage lzma + IMAGE_SIZE := 28672k + UBINIZE_OPTS := -E 5 + IMAGES := sysupgrade.tar kernel.bin rootfs.bin + IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata + IMAGE/kernel.bin := append-kernel + IMAGE/rootfs.bin := append-ubi | check-size $$$$(IMAGE_SIZE) + DEVICE_TITLE := Netgear R6220 + DEVICE_PACKAGES := kmod-usb2 kmod-mt76 +endef +TARGET_DEVICES += r6220 + define Device/rb750gr3 DTS := RB750Gr3 IMAGE_SIZE := $(ralink_default_fw_size_16M)