From: Ander Conselvan de Oliveira Date: Mon, 1 Jun 2015 10:50:03 +0000 (+0200) Subject: drm/i915: Read hw state into an atomic state struct, v2. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=37ade41794e914103b8db417e480afd20dcea971;p=openwrt%2Fstaging%2Fblogic.git drm/i915: Read hw state into an atomic state struct, v2. To make this work we load the new hardware state into the atomic_state, then swap it with the sw state. This lets us change the force restore path in setup_hw_state() to use a single call to intel_mode_set() to restore all the previous state. As a nice bonus this kills off encoder->new_encoder, connector->new_enabled and crtc->new_enabled. They were used only to restore the state after a modeset. Changes since v1: - Make sure all possible planes are added with their crtc set, so they will be turned off on first modeset. Signed-off-by: Ander Conselvan de Oliveira Signed-off-by: Maarten Lankhorst Reviewed-by: Matt Roper Signed-off-by: Jani Nikula --- diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c index 4df6d2d7a9c8..e47e00e5b130 100644 --- a/drivers/gpu/drm/i915/intel_atomic.c +++ b/drivers/gpu/drm/i915/intel_atomic.c @@ -395,7 +395,7 @@ int intel_atomic_setup_scalers(struct drm_device *dev, return 0; } -static void +void intel_atomic_duplicate_dpll_state(struct drm_i915_private *dev_priv, struct intel_shared_dpll_config *shared_dpll) { diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 12d6da8f0465..c04bc80d1a65 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10312,7 +10312,7 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, retry: ret = drm_modeset_lock(&config->connection_mutex, ctx); if (ret) - goto fail_unlock; + goto fail; /* * Algorithm gets a little messy: @@ -10330,10 +10330,10 @@ retry: ret = drm_modeset_lock(&crtc->mutex, ctx); if (ret) - goto fail_unlock; + goto fail; ret = drm_modeset_lock(&crtc->primary->mutex, ctx); if (ret) - goto fail_unlock; + goto fail; old->dpms_mode = connector->dpms; old->load_detect_temp = false; @@ -10352,9 +10352,6 @@ retry: continue; if (possible_crtc->state->enable) continue; - /* This can occur when applying the pipe A quirk on resume. */ - if (to_intel_crtc(possible_crtc)->new_enabled) - continue; crtc = possible_crtc; break; @@ -10365,20 +10362,17 @@ retry: */ if (!crtc) { DRM_DEBUG_KMS("no pipe available for load-detect\n"); - goto fail_unlock; + goto fail; } ret = drm_modeset_lock(&crtc->mutex, ctx); if (ret) - goto fail_unlock; + goto fail; ret = drm_modeset_lock(&crtc->primary->mutex, ctx); if (ret) - goto fail_unlock; - intel_encoder->new_crtc = to_intel_crtc(crtc); - to_intel_connector(connector)->new_encoder = intel_encoder; + goto fail; intel_crtc = to_intel_crtc(crtc); - intel_crtc->new_enabled = true; old->dpms_mode = connector->dpms; old->load_detect_temp = true; old->release_fb = NULL; @@ -10446,9 +10440,7 @@ retry: intel_wait_for_vblank(dev, intel_crtc->pipe); return true; - fail: - intel_crtc->new_enabled = crtc->state->enable; -fail_unlock: +fail: drm_atomic_state_free(state); state = NULL; @@ -10494,10 +10486,6 @@ void intel_release_load_detect_pipe(struct drm_connector *connector, if (IS_ERR(crtc_state)) goto fail; - to_intel_connector(connector)->new_encoder = NULL; - intel_encoder->new_crtc = NULL; - intel_crtc->new_enabled = false; - connector_state->best_encoder = NULL; connector_state->crtc = NULL; @@ -11644,33 +11632,6 @@ static const struct drm_crtc_helper_funcs intel_helper_funcs = { .atomic_flush = intel_finish_crtc_commit, }; -/** - * intel_modeset_update_staged_output_state - * - * Updates the staged output configuration state, e.g. after we've read out the - * current hw state. - */ -static void intel_modeset_update_staged_output_state(struct drm_device *dev) -{ - struct intel_crtc *crtc; - struct intel_encoder *encoder; - struct intel_connector *connector; - - for_each_intel_connector(dev, connector) { - connector->new_encoder = - to_intel_encoder(connector->base.encoder); - } - - for_each_intel_encoder(dev, encoder) { - encoder->new_crtc = - to_intel_crtc(encoder->base.crtc); - } - - for_each_intel_crtc(dev, crtc) { - crtc->new_enabled = crtc->base.state->enable; - } -} - /* Transitional helper to copy current connector/encoder state to * connector->state. This is needed so that code that is partially * converted to atomic does the right thing. @@ -12201,7 +12162,6 @@ intel_modeset_update_state(struct drm_atomic_state *state) } drm_atomic_helper_update_legacy_modeset_state(state->dev, state); - intel_modeset_update_staged_output_state(state->dev); /* Double check state. */ for_each_crtc(dev, crtc) { @@ -12505,11 +12465,14 @@ check_connector_state(struct drm_device *dev) struct intel_connector *connector; for_each_intel_connector(dev, connector) { + struct drm_encoder *encoder = connector->base.encoder; + struct drm_connector_state *state = connector->base.state; + /* This also checks the encoder/connector hw state with the * ->get_hw_state callbacks. */ intel_connector_check_state(connector); - I915_STATE_WARN(&connector->new_encoder->base != connector->base.encoder, + I915_STATE_WARN(state->best_encoder != encoder, "connector's staged encoder doesn't match current encoder\n"); } } @@ -12529,8 +12492,6 @@ check_encoder_state(struct drm_device *dev) encoder->base.base.id, encoder->base.name); - I915_STATE_WARN(&encoder->new_crtc->base != encoder->base.crtc, - "encoder's stage crtc doesn't match current crtc\n"); I915_STATE_WARN(encoder->connectors_active && !encoder->base.crtc, "encoder's active_connectors set, but no crtc\n"); @@ -12540,6 +12501,9 @@ check_encoder_state(struct drm_device *dev) enabled = true; if (connector->base.dpms != DRM_MODE_DPMS_OFF) active = true; + + I915_STATE_WARN(connector->base.state->crtc != encoder->base.crtc, + "encoder's stage crtc doesn't match current crtc\n"); } /* * for MST connectors if we unplug the connector is gone @@ -12969,11 +12933,11 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc) * need to copy the staged config to the atomic state, otherwise the * mode set will just reapply the state the HW is already in. */ for_each_intel_encoder(dev, encoder) { - if (&encoder->new_crtc->base != crtc) + if (encoder->base.crtc != crtc) continue; for_each_intel_connector(dev, connector) { - if (connector->new_encoder != encoder) + if (connector->base.state->best_encoder != &encoder->base) continue; connector_state = drm_atomic_get_connector_state(state, &connector->base); @@ -12986,14 +12950,10 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc) } connector_state->crtc = crtc; - connector_state->best_encoder = &encoder->base; } } for_each_intel_crtc(dev, intel_crtc) { - if (intel_crtc->new_enabled == intel_crtc->base.enabled) - continue; - crtc_state = intel_atomic_get_crtc_state(state, intel_crtc); if (IS_ERR(crtc_state)) { DRM_DEBUG_KMS("Failed to add [CRTC:%d] to state: %ld\n", @@ -13002,9 +12962,6 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc) continue; } - crtc_state->base.active = crtc_state->base.enable = - intel_crtc->new_enabled; - if (&intel_crtc->base == crtc) drm_mode_copy(&crtc_state->base.mode, &crtc->mode); } @@ -15080,6 +15037,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) * ... */ plane = crtc->plane; to_intel_plane_state(crtc->base.primary->state)->visible = true; + crtc->base.primary->crtc = &crtc->base; crtc->plane = !plane; intel_crtc_control(&crtc->base, false); crtc->plane = plane; @@ -15243,99 +15201,225 @@ static bool primary_get_hw_state(struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; - if (!crtc->active) + if (!crtc->base.enabled) return false; return I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE; } -static void intel_modeset_readout_hw_state(struct drm_device *dev) +static int readout_hw_crtc_state(struct drm_atomic_state *state, + struct intel_crtc *crtc) { - struct drm_i915_private *dev_priv = dev->dev_private; - enum pipe pipe; - struct intel_crtc *crtc; - struct intel_encoder *encoder; - struct intel_connector *connector; - int i; + struct drm_i915_private *dev_priv = to_i915(state->dev); + struct intel_crtc_state *crtc_state; + struct drm_plane *primary = crtc->base.primary; + struct drm_plane_state *drm_plane_state; + struct intel_plane_state *plane_state; + int ret; - for_each_intel_crtc(dev, crtc) { - struct drm_plane *primary = crtc->base.primary; - struct intel_plane_state *plane_state; + crtc_state = intel_atomic_get_crtc_state(state, crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); - memset(crtc->config, 0, sizeof(*crtc->config)); - crtc->config->base.crtc = &crtc->base; + ret = drm_atomic_add_affected_planes(state, &crtc->base); + if (ret) + return ret; - crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE; + memset(crtc_state, 0, sizeof(*crtc_state)); + crtc_state->base.crtc = &crtc->base; + crtc_state->base.state = state; - crtc->active = dev_priv->display.get_pipe_config(crtc, - crtc->config); + crtc_state->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE; - crtc->base.state->enable = crtc->active; - crtc->base.state->active = crtc->active; - crtc->base.enabled = crtc->active; + crtc_state->base.enable = crtc_state->base.active = + crtc->base.enabled = dev_priv->display.get_pipe_config(crtc, crtc_state); - plane_state = to_intel_plane_state(primary->state); - plane_state->visible = primary_get_hw_state(crtc); + /* update transitional state */ + crtc->active = crtc_state->base.active; + crtc->config = crtc_state; - DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n", - crtc->base.base.id, - crtc->active ? "enabled" : "disabled"); - } + drm_plane_state = drm_atomic_get_plane_state(state, primary); + if (IS_ERR(drm_plane_state)) + return PTR_ERR(drm_plane_state); + + plane_state = to_intel_plane_state(drm_plane_state); + plane_state->visible = primary_get_hw_state(crtc); + if (plane_state->visible) { + primary->crtc = &crtc->base; + crtc_state->base.plane_mask |= 1 << drm_plane_index(primary); + } else + crtc_state->base.plane_mask &= ~(1 << drm_plane_index(primary)); + + DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n", + crtc->base.base.id, + crtc_state->base.active ? "enabled" : "disabled"); + + return 0; +} + +static int readout_hw_pll_state(struct drm_atomic_state *state) +{ + struct drm_i915_private *dev_priv = to_i915(state->dev); + struct intel_shared_dpll_config *shared_dpll; + struct intel_crtc *crtc; + struct intel_crtc_state *crtc_state; + int i; + + shared_dpll = intel_atomic_get_shared_dpll_state(state); for (i = 0; i < dev_priv->num_shared_dpll; i++) { struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; pll->on = pll->get_hw_state(dev_priv, pll, - &pll->config.hw_state); + &shared_dpll[i].hw_state); + pll->active = 0; - pll->config.crtc_mask = 0; - for_each_intel_crtc(dev, crtc) { - if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) { + shared_dpll[i].crtc_mask = 0; + + for_each_intel_crtc(state->dev, crtc) { + crtc_state = intel_atomic_get_crtc_state(state, crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); + + if (crtc_state->base.active && + crtc_state->shared_dpll == i) { pll->active++; - pll->config.crtc_mask |= 1 << crtc->pipe; + shared_dpll[i].crtc_mask |= + 1 << crtc->pipe; } } DRM_DEBUG_KMS("%s hw state readout: crtc_mask 0x%08x, on %i\n", - pll->name, pll->config.crtc_mask, pll->on); + pll->name, shared_dpll[i].crtc_mask, + pll->on); - if (pll->config.crtc_mask) + if (shared_dpll[i].crtc_mask) intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS); } - for_each_intel_encoder(dev, encoder) { - pipe = 0; + return 0; +} - if (encoder->get_hw_state(encoder, &pipe)) { - crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); - encoder->base.crtc = &crtc->base; - encoder->get_config(encoder, crtc->config); - } else { - encoder->base.crtc = NULL; - } +static struct drm_connector_state * +get_connector_state_for_encoder(struct drm_atomic_state *state, + struct intel_encoder *encoder) +{ + struct drm_connector *connector; + struct drm_connector_state *connector_state; + int i; - encoder->connectors_active = false; - DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n", - encoder->base.base.id, - encoder->base.name, - encoder->base.crtc ? "enabled" : "disabled", - pipe_name(pipe)); - } + for_each_connector_in_state(state, connector, connector_state, i) + if (connector_state->best_encoder == &encoder->base) + return connector_state; + + return NULL; +} + +static int readout_hw_connector_encoder_state(struct drm_atomic_state *state) +{ + struct drm_device *dev = state->dev; + struct drm_i915_private *dev_priv = to_i915(state->dev); + struct intel_crtc *crtc; + struct drm_crtc_state *drm_crtc_state; + struct intel_crtc_state *crtc_state; + struct intel_encoder *encoder; + struct intel_connector *connector; + struct drm_connector_state *connector_state; + enum pipe pipe; for_each_intel_connector(dev, connector) { + connector_state = + drm_atomic_get_connector_state(state, &connector->base); + if (IS_ERR(connector_state)) + return PTR_ERR(connector_state); + if (connector->get_hw_state(connector)) { connector->base.dpms = DRM_MODE_DPMS_ON; - connector->encoder->connectors_active = true; connector->base.encoder = &connector->encoder->base; } else { connector->base.dpms = DRM_MODE_DPMS_OFF; connector->base.encoder = NULL; } + + /* We'll update the crtc field when reading encoder state */ + connector_state->crtc = NULL; + + connector_state->best_encoder = connector->base.encoder; + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n", connector->base.base.id, connector->base.name, connector->base.encoder ? "enabled" : "disabled"); } + + for_each_intel_encoder(dev, encoder) { + pipe = 0; + + connector_state = + get_connector_state_for_encoder(state, encoder); + + encoder->connectors_active = !!connector_state; + + if (encoder->get_hw_state(encoder, &pipe)) { + encoder->base.crtc = + dev_priv->pipe_to_crtc_mapping[pipe]; + crtc = to_intel_crtc(encoder->base.crtc); + + drm_crtc_state = + state->crtc_states[drm_crtc_index(&crtc->base)]; + crtc_state = to_intel_crtc_state(drm_crtc_state); + + encoder->get_config(encoder, crtc_state); + + if (connector_state) + connector_state->crtc = &crtc->base; + } else { + encoder->base.crtc = NULL; + } + + DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n", + encoder->base.base.id, + encoder->base.name, + encoder->base.crtc ? "enabled" : "disabled", + pipe_name(pipe)); + } + + return 0; +} + +static struct drm_atomic_state * +intel_modeset_readout_hw_state(struct drm_device *dev) +{ + struct intel_crtc *crtc; + int ret = 0; + + struct drm_atomic_state *state; + + state = drm_atomic_state_alloc(dev); + if (!state) + return ERR_PTR(-ENOMEM); + + state->acquire_ctx = dev->mode_config.acquire_ctx; + + for_each_intel_crtc(dev, crtc) { + ret = readout_hw_crtc_state(state, crtc); + if (ret) + goto err_free; + } + + ret = readout_hw_pll_state(state); + if (ret) + goto err_free; + + ret = readout_hw_connector_encoder_state(state); + if (ret) + goto err_free; + + return state; + +err_free: + drm_atomic_state_free(state); + return ERR_PTR(ret); } /* Scan out the current hw modeset state, sanitizes it and maps it into the drm @@ -15344,37 +15428,57 @@ void intel_modeset_setup_hw_state(struct drm_device *dev, bool force_restore) { struct drm_i915_private *dev_priv = dev->dev_private; - enum pipe pipe; - struct intel_crtc *crtc; + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; struct intel_encoder *encoder; + struct drm_atomic_state *state; + struct intel_shared_dpll_config shared_dplls[I915_NUM_PLLS]; int i; - intel_modeset_readout_hw_state(dev); - - /* - * Now that we have the config, copy it to each CRTC struct - * Note that this could go away if we move to using crtc_config - * checking everywhere. - */ - for_each_intel_crtc(dev, crtc) { - if (crtc->active && i915.fastboot) { - intel_mode_from_pipe_config(&crtc->base.mode, - crtc->config); - DRM_DEBUG_KMS("[CRTC:%d] found active mode: ", - crtc->base.base.id); - drm_mode_debug_printmodeline(&crtc->base.mode); - } + state = intel_modeset_readout_hw_state(dev); + if (IS_ERR(state)) { + DRM_ERROR("Failed to read out hw state\n"); + return; } + drm_atomic_helper_swap_state(dev, state); + + /* swap sw/hw dpll state */ + intel_atomic_duplicate_dpll_state(dev_priv, shared_dplls); + intel_shared_dpll_commit(state); + memcpy(to_intel_atomic_state(state)->shared_dpll, + shared_dplls, sizeof(*shared_dplls) * dev_priv->num_shared_dpll); + /* HW state is read out, now we need to sanitize this mess. */ for_each_intel_encoder(dev, encoder) { intel_sanitize_encoder(encoder); } - for_each_pipe(dev_priv, pipe) { - crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); - intel_sanitize_crtc(crtc); - intel_dump_pipe_config(crtc, crtc->config, + for_each_crtc_in_state(state, crtc, crtc_state, i) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + /* prevent unnneeded restores with force_restore */ + crtc_state->active_changed = + crtc_state->mode_changed = + crtc_state->planes_changed = false; + + if (crtc->enabled) { + intel_mode_from_pipe_config(&crtc->state->mode, + to_intel_crtc_state(crtc->state)); + + drm_mode_copy(&crtc->mode, &crtc->state->mode); + drm_mode_copy(&crtc->hwmode, + &crtc->state->adjusted_mode); + } + + intel_sanitize_crtc(intel_crtc); + + /* + * sanitize_crtc may have forced an update of crtc->state, + * so reload in intel_dump_pipe_config + */ + intel_dump_pipe_config(intel_crtc, + to_intel_crtc_state(crtc->state), "[setup_hw_state]"); } @@ -15398,20 +15502,17 @@ void intel_modeset_setup_hw_state(struct drm_device *dev, ilk_wm_get_hw_state(dev); if (force_restore) { - i915_redisable_vga(dev); + int ret; - /* - * We need to use raw interfaces for restoring state to avoid - * checking (bogus) intermediate states. - */ - for_each_pipe(dev_priv, pipe) { - struct drm_crtc *crtc = - dev_priv->pipe_to_crtc_mapping[pipe]; + i915_redisable_vga(dev); - intel_crtc_restore_mode(crtc); + ret = intel_set_mode(state); + if (ret) { + DRM_ERROR("Failed to restore previous mode\n"); + drm_atomic_state_free(state); } } else { - intel_modeset_update_staged_output_state(dev); + drm_atomic_state_free(state); } intel_modeset_check_state(dev); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index e15039800cf0..4aa10a5198f6 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -130,11 +130,6 @@ struct intel_fbdev { struct intel_encoder { struct drm_encoder base; - /* - * The new crtc this encoder will be driven from. Only differs from - * base->crtc while a modeset is in progress. - */ - struct intel_crtc *new_crtc; enum intel_output_type type; unsigned int cloneable; @@ -195,12 +190,6 @@ struct intel_connector { */ struct intel_encoder *encoder; - /* - * The new encoder this connector will be driven. Only differs from - * encoder while a modeset is in progress. - */ - struct intel_encoder *new_encoder; - /* Reads out the current hw, returning true if the connector is enabled * and active (i.e. dpms ON state). */ bool (*get_hw_state)(struct intel_connector *); @@ -535,7 +524,6 @@ struct intel_crtc { struct intel_initial_plane_config plane_config; struct intel_crtc_state *config; - bool new_enabled; /* reset counter value when the last flip was submitted */ unsigned int reset_counter; @@ -1416,6 +1404,8 @@ struct drm_atomic_state *intel_atomic_state_alloc(struct drm_device *dev); void intel_atomic_state_clear(struct drm_atomic_state *); struct intel_shared_dpll_config * intel_atomic_get_shared_dpll_state(struct drm_atomic_state *s); +void intel_atomic_duplicate_dpll_state(struct drm_i915_private *, + struct intel_shared_dpll_config *); static inline struct intel_crtc_state * intel_atomic_get_crtc_state(struct drm_atomic_state *state,