From: Alexander Couzens <lynxis@fe80.eu>
Date: Sun, 17 Jan 2021 05:54:04 +0000 (+0100)
Subject: ipq40xx: split generic images into own file
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=378c7ff282101b204d2a29fa080ed66f2a14940d;p=openwrt%2Fstaging%2Fthess.git

ipq40xx: split generic images into own file

In preparation of the new mikrotik subtarget split the generic images
into generic.mk

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
---

diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile
index f10ff002dc..a764cb60af 100644
--- a/target/linux/ipq40xx/image/Makefile
+++ b/target/linux/ipq40xx/image/Makefile
@@ -1,10 +1,6 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
-DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
-DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
-
 define Device/Default
 	PROFILES := Default
 	KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
@@ -18,807 +14,6 @@ define Device/Default
 	IMAGE/sysupgrade.bin/squashfs :=
 endef
 
-define Device/FitImage
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-	KERNEL_NAME := Image
-endef
-
-define Device/FitImageLzma
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-	KERNEL_NAME := Image
-endef
-
-define Device/FitzImage
-	KERNEL_SUFFIX := -fit-zImage.itb
-	KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-	KERNEL_NAME := zImage
-endef
-
-define Device/UbiFit
-	KERNEL_IN_UBI := 1
-	IMAGES := nand-factory.ubi nand-sysupgrade.bin
-	IMAGE/nand-factory.ubi := append-ubi
-	IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
-endef
-
-define Device/DniImage
-	$(call Device/FitzImage)
-	NETGEAR_BOARD_ID :=
-	NETGEAR_HW_ID :=
-	IMAGES += factory.img
-	IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
-	IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
-		append-rootfs | pad-rootfs | append-metadata | check-size
-endef
-
-define Build/append-rootfshdr
-	mkimage -A $(LINUX_KARCH) \
-		-O linux -T filesystem \
-		-C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-		-n root.squashfs -d $(IMAGE_ROOTFS) $@.new
-	dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
-endef
-
-define Build/mkmylofw_32m
-	$(eval device_id=$(word 1,$(1)))
-	$(eval revision=$(word 2,$(1)))
-
-	let \
-		size="$$(stat -c%s $@)" \
-		pad="$(subst k,* 1024,$(BLOCKSIZE))" \
-		pad="(pad - (size % pad)) % pad" \
-		newsize='size + pad'; \
-		$(STAGING_DIR_HOST)/bin/mkmylofw \
-		-B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
-		-s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
-		$@.new
-	@mv $@.new $@
-endef
-
-define Build/qsdk-ipq-factory-nand-askey
-	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
-		askey_kernel $(IMAGE_KERNEL) \
-		askey_fs $(IMAGE_ROOTFS) \
-		ubifs $@
-	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
-	@mv $@.new $@
-endef
-
-define Build/SenaoFW
-	-$(STAGING_DIR_HOST)/bin/mksenaofw \
-		-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
-		-c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
-		-e $@ \
-		-o $@.new
-	@cp $@.new $@
-endef
-
-define Build/wrgg-image
-	mkwrggimg -i $@ \
-	-o $@.new \
-	-d "$(WRGG_DEVNAME)" \
-	-s "$(WRGG_SIGNATURE)" \
-	-v "" -m "" -B ""
-	mv $@.new $@
-endef
-
-define Device/8dev_habanero-dvk
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := 8devices
-	DEVICE_MODEL := Habanero DVK
-	IMAGE_SIZE := 30976k
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
-	IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
-endef
-TARGET_DEVICES += 8dev_habanero-dvk
-
-define Device/8dev_jalapeno-common
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	SOC := qcom-ipq4018
-endef
-
-define Device/8dev_jalapeno
-	$(call Device/8dev_jalapeno-common)
-	DEVICE_VENDOR := 8devices
-	DEVICE_MODEL := Jalapeno
-endef
-TARGET_DEVICES += 8dev_jalapeno
-
-define Device/alfa-network_ap120c-ac
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := ALFA Network
-	DEVICE_MODEL := AP120C-AC
-	SOC := qcom-ipq4018
-	DEVICE_PACKAGES := kmod-usb-acm \
-		kmod-tpm-i2c-atmel uboot-envtools
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	IMAGE_SIZE := 65536k
-	IMAGES := nand-factory.bin nand-sysupgrade.bin
-	IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-endef
-TARGET_DEVICES += alfa-network_ap120c-ac
-
-define Device/aruba_glenmorangie
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := Aruba
-	SOC := qcom-ipq4029
-	DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
-endef
-
-define Device/aruba_ap-303
-	$(call Device/aruba_glenmorangie)
-	DEVICE_MODEL := AP-303
-	DEVICE_PACKAGES += uboot-envtools
-endef
-TARGET_DEVICES += aruba_ap-303
-
-define Device/aruba_ap-303h
-	$(call Device/aruba_glenmorangie)
-	DEVICE_MODEL := AP-303H
-endef
-TARGET_DEVICES += aruba_ap-303h
-
-define Device/aruba_ap-365
-	$(call Device/aruba_glenmorangie)
-	DEVICE_MODEL := AP-365
-	DEVICE_PACKAGES += kmod-hwmon-ad7418 uboot-envtools
-endef
-TARGET_DEVICES += aruba_ap-365
-
-define Device/asus_map-ac2200
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := ASUS
-	DEVICE_MODEL := Lyra (MAP-AC2200)
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
-endef
-TARGET_DEVICES += asus_map-ac2200
-
-define Device/asus_rt-ac58u
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := ASUS
-	DEVICE_MODEL := RT-AC58U
-	SOC := qcom-ipq4018
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DTB_SIZE := 65536
-	IMAGE_SIZE := 20439364
-	FILESYSTEMS := squashfs
-#	Someone - in their infinite wisdom - decided to put the firmware
-#	version in front of the image name \03\00\00\04 => Version 3.0.0.4
-#	Since u-boot works with strings we either need another fixup step
-#	to add a version... or we are very careful not to add '\0' into that
-#	string and call it a day.... Yeah, we do the latter!
-	UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
-	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
-		kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += asus_rt-ac58u
-
-define Device/avm_fritzbox-4040
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := AVM
-	DEVICE_MODEL := FRITZ!Box 4040
-	SOC := qcom-ipq4018
-	BOARD_NAME := fritz4040
-	IMAGE_SIZE := 29056k
-	UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
-	UBOOT_PARTITION_SIZE := 524288
-	IMAGES += eva.bin
-	IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
-	DEVICE_PACKAGES := fritz-tffs fritz-caldata
-endef
-TARGET_DEVICES += avm_fritzbox-4040
-
-define Device/avm_fritzbox-7530
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := AVM
-	DEVICE_MODEL := FRITZ!Box 7530
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
-endef
-TARGET_DEVICES += avm_fritzbox-7530
-
-define Device/avm_fritzrepeater-1200
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := AVM
-	DEVICE_MODEL := FRITZ!Repeater 1200
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
-endef
-TARGET_DEVICES += avm_fritzrepeater-1200
-
-define Device/avm_fritzrepeater-3000
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := AVM
-	DEVICE_MODEL := FRITZ!Repeater 3000
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
-endef
-TARGET_DEVICES += avm_fritzrepeater-3000
-
-define Device/buffalo_wtr-m2133hp
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Buffalo
-	DEVICE_MODEL := WTR-M2133HP
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-endef
-TARGET_DEVICES += buffalo_wtr-m2133hp
-
-define Device/cellc_rtl30vw
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
-	KERNEL_NAME := Image
-	KERNEL_IN_UBI :=
-	IMAGES := nand-factory.bin nand-sysupgrade.bin
-	IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
-	IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
-	DEVICE_VENDOR := Cell C
-	DEVICE_MODEL := RTL30VW
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@5
-	KERNEL_INSTALL := 1
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 57344k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
-endef
-TARGET_DEVICES += cellc_rtl30vw
-
-define Device/cilab_meshpoint-one
-	$(call Device/8dev_jalapeno-common)
-	DEVICE_VENDOR := Crisis Innovation Lab
-	DEVICE_MODEL := MeshPoint.One
-	DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
-endef
-TARGET_DEVICES += cilab_meshpoint-one
-
-define Device/compex_wpj419
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Compex
-	DEVICE_MODEL := WPJ419
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@12
-	KERNEL_INSTALL := 1
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	FILESYSTEMS := squashfs
-endef
-TARGET_DEVICES += compex_wpj419
-
-define Device/compex_wpj428
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Compex
-	DEVICE_MODEL := WPJ428
-	SOC := qcom-ipq4028
-	DEVICE_DTS_CONFIG := config@4
-	BLOCKSIZE := 64k
-	IMAGE_SIZE := 31232k
-	KERNEL_SIZE := 4096k
-	IMAGES += cpximg-6a04.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
-	DEVICE_PACKAGES := kmod-gpio-beeper
-endef
-TARGET_DEVICES += compex_wpj428
-
-define Device/devolo_magic-2-wifi-next
-	$(call Device/FitImage)
-	DEVICE_VENDOR := devolo
-	DEVICE_MODEL := Magic 2 WiFi next
-	SOC := qcom-ipq4018
-	KERNEL_SIZE := 4096k
-
-	# If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
-	# it will bootm it, just like we want for the initramfs.
-	KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
-		append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
-
-	IMAGE_SIZE := 26624k
-	IMAGES := sysupgrade.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next uboot-envtools
-endef
-TARGET_DEVICES += devolo_magic-2-wifi-next
-
-define Device/dlink_dap-2610
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := D-Link
-	DEVICE_MODEL := DAP-2610
-	SOC := qcom-ipq4018
-	DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
-	BLOCKSIZE := 64k
-	WRGG_DEVNAME := /dev/mtdblock/8
-	WRGG_SIGNATURE := wapac30_dkbs_dap2610
-	IMAGE_SIZE := 14080k
-	IMAGES += factory.bin
-	# Bootloader expects a special 160 byte header which is added by
-	# wrgg-image.
-	# Factory image size must be larger than 6MB, and size in wrgg header must
-	# match actual factory image size to be flashable from D-Link http server.
-	# Bootloader verifies checksum of wrgg image before booting, thus jffs2
-	# cannot be part of the wrgg image. This is solved in the factory image by
-	# having the rootfs at the end of the image (without pad-rootfs). And in
-	# the sysupgrade image only the kernel is included in the wrgg checksum,
-	# but this is not flashable from the D-link http server.
-	# append-rootfs must start on an erase block boundary.
-	IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
-	IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
-endef
-TARGET_DEVICES += dlink_dap-2610
-
-define Device/edgecore_ecw5211
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Edgecore
-	DEVICE_MODEL := ECW5211
-	SOC := qcom-ipq4018
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools
-endef
-TARGET_DEVICES += edgecore_ecw5211
-
-define Device/edgecore_oap100
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Edgecore
-	DEVICE_MODEL := OAP100
-	SOC := qcom-ipq4019
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	IMAGES := nand-sysupgrade.bin
-	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
-	DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
-endef
-TARGET_DEVICES += edgecore_oap100
-
-define Device/engenius_eap1300
-	$(call Device/FitImage)
-	DEVICE_VENDOR := EnGenius
-	DEVICE_MODEL := EAP1300
-	DEVICE_DTS_CONFIG := config@4
-	BOARD_NAME := eap1300
-	SOC := qcom-ipq4018
-	KERNEL_SIZE := 5120k
-	IMAGE_SIZE := 25344k
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += engenius_eap1300
-
-define Device/engenius_eap2200
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := EnGenius
-	DEVICE_MODEL := EAP2200
-	SOC := qcom-ipq4019
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
-endef
-TARGET_DEVICES += engenius_eap2200
-
-define Device/engenius_emd1
-	$(call Device/FitImage)
-	DEVICE_VENDOR := EnGenius
-	DEVICE_MODEL := EMD1
-	DEVICE_DTS_CONFIG := config@4
-	SOC := qcom-ipq4018
-	IMAGE_SIZE := 30720k
-	IMAGES += factory.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
-endef
-TARGET_DEVICES += engenius_emd1
-
-define Device/engenius_emr3500
-	$(call Device/FitImage)
-	DEVICE_VENDOR := EnGenius
-	DEVICE_MODEL := EMR3500
-	DEVICE_DTS_CONFIG := config@4
-	SOC := qcom-ipq4018
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 30720k
-	IMAGES += factory.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
-endef
-TARGET_DEVICES += engenius_emr3500
-
-define Device/engenius_ens620ext
-	$(call Device/FitImage)
-	DEVICE_VENDOR := EnGenius
-	DEVICE_MODEL := ENS620EXT
-	SOC := qcom-ipq4018
-	DEVICE_DTS_CONFIG := config@4
-	BLOCKSIZE := 64k
-	PAGESIZE := 256
-	BOARD_NAME := ENS620EXT
-	VENDOR_ID := 0x0101
-	PRODUCT_ID := 0x79
-	PRODUCT_ID_NEW := 0xA4
-	DATECODE := 190507
-	FW_VER := 3.1.2
-	FW_VER_NEW := 3.5.6
-	CW_VER := 1.8.99
-	IMAGE_SIZE := 21312k
-	KERNEL_SIZE := 5120k
-	FILESYSTEMS := squashfs
-	IMAGES += factory_30.bin factory_35.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
-	IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
-	IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
-endef
-TARGET_DEVICES += engenius_ens620ext
-
-define Device/ezviz_cs-w3-wd1200g-eup
-	$(call Device/FitImage)
-	DEVICE_VENDOR := EZVIZ
-	DEVICE_MODEL := CS-W3-WD1200G
-	DEVICE_VARIANT := EUP
-	DEVICE_DTS_CONFIG := config@4
-	IMAGE_SIZE := 14848k
-	SOC := qcom-ipq4018
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
-		append-metadata
-	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
-		ipq-wifi-ezviz_cs-w3-wd1200g-eup
-endef
-TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
-
-define Device/glinet_gl-ap1300
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := GL.iNet
-	DEVICE_MODEL := GL-AP1300
-	SOC := qcom-ipq4018
-	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	IMAGE_SIZE := 131072k
-	KERNEL_INSTALL := 1
-	DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
-endef
-TARGET_DEVICES += glinet_gl-ap1300
-
-define Device/glinet_gl-b1300
-	$(call Device/FitImage)
-	DEVICE_VENDOR := GL.iNet
-	DEVICE_MODEL := GL-B1300
-	BOARD_NAME := gl-b1300
-	SOC := qcom-ipq4029
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 26624k
-	IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += glinet_gl-b1300
-
-define Device/glinet_gl-s1300
-	$(call Device/FitImage)
-	DEVICE_VENDOR := GL.iNet
-	DEVICE_MODEL := GL-S1300
-	SOC := qcom-ipq4029
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 26624k
-	IMAGES := sysupgrade.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
-endef
-TARGET_DEVICES += glinet_gl-s1300
-
-define Device/linksys_ea6350v3
-	# The Linksys EA6350v3 has a uboot bootloader that does not
-	# support either booting lzma kernel images nor booting UBI
-	# partitions. This uboot, however, supports raw kernel images and
-	# gzipped images.
-	#
-	# As for the time of writing this, the device will boot the kernel
-	# from a fixed address with a fixed length of 3MiB. Also, the
-	# device has a hard-coded kernel command line that requieres the
-	# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
-	# Oh... and the kernel partition overlaps with the rootfs
-	# partition (the same for alt_kernel and alt_rootfs).
-	#
-	# If you are planing re-partitioning the device, you may want to
-	# keep those details in mind:
-	# 1. The kernel adresses you should honor are 0x00000000 and
-	#    0x02800000 respectively.
-	# 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
-	# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
-	# 4. The kernel command line from uboot is harcoded to boot with
-	#    rootfs either in mtd11 or mtd13.
-	$(call Device/FitzImage)
-	DEVICE_VENDOR := Linksys
-	DEVICE_MODEL := EA6350
-	DEVICE_VARIANT := v3
-	SOC := qcom-ipq4018
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 37888k
-	UBINIZE_OPTS := -E 5
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
-	DEVICE_PACKAGES := uboot-envtools
-endef
-TARGET_DEVICES += linksys_ea6350v3
-
-define Device/linksys_ea8300
-	$(call Device/FitzImage)
-	DEVICE_VENDOR := Linksys
-	DEVICE_MODEL := EA8300
-	SOC := qcom-ipq4019
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 87040k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
-	IMAGES += factory.bin
-	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
-	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += linksys_ea8300
-
-define Device/linksys_mr8300
-	$(call Device/FitzImage)
-	DEVICE_VENDOR := Linksys
-	DEVICE_MODEL := MR8300
-	SOC := qcom-ipq4019
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 87040k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
-	IMAGES += factory.bin
-	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
-	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += linksys_mr8300
-
-define Device/luma_wrtq-329acn
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Luma Home
-	DEVICE_MODEL := WRTQ-329ACN
-	SOC := qcom-ipq4018
-	DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio uboot-envtools
-	IMAGE_SIZE := 76632k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-endef
-TARGET_DEVICES += luma_wrtq-329acn
-
-define Device/meraki_mr33
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Cisco Meraki
-	DEVICE_MODEL := MR33
-	SOC := qcom-ipq4029
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
-endef
-TARGET_DEVICES += meraki_mr33
-
-define Device/mobipromo_cm520-79f
-	$(call Device/FitzImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := MobiPromo
-	DEVICE_MODEL := CM520-79F
-	SOC := qcom-ipq4019
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += mobipromo_cm520-79f
-
-define Device/netgear_ex61x0v2
-	$(call Device/DniImage)
-	DEVICE_VENDOR := NETGEAR
-	DEVICE_DTS_CONFIG := config@4
-	NETGEAR_BOARD_ID := EX6150v2series
-	NETGEAR_HW_ID := 29765285+16+0+128+2x2
-	IMAGE_SIZE := 14400k
-	SOC := qcom-ipq4018
-endef
-
-define Device/netgear_ex6100v2
-	$(call Device/netgear_ex61x0v2)
-	DEVICE_MODEL := EX6100
-	DEVICE_VARIANT := v2
-endef
-TARGET_DEVICES += netgear_ex6100v2
-
-define Device/netgear_ex6150v2
-	$(call Device/netgear_ex61x0v2)
-	DEVICE_MODEL := EX6150
-	DEVICE_VARIANT := v2
-endef
-TARGET_DEVICES += netgear_ex6150v2
-
-define Device/openmesh_a42
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := OpenMesh
-	DEVICE_MODEL := A42
-	SOC := qcom-ipq4018
-	DEVICE_DTS_CONFIG := config@om.a42
-	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
-	IMAGE_SIZE := 15616k
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := uboot-envtools
-endef
-TARGET_DEVICES += openmesh_a42
-
-define Device/openmesh_a62
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := OpenMesh
-	DEVICE_MODEL := A62
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@om.a62
-	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
-	IMAGE_SIZE := 15552k
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
-endef
-TARGET_DEVICES += openmesh_a62
-
-define Device/plasmacloud_pa1200
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := Plasma Cloud
-	DEVICE_MODEL := PA1200
-	SOC := qcom-ipq4018
-	DEVICE_DTS_CONFIG := config@pc.pa1200
-	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
-	IMAGE_SIZE := 15616k
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := uboot-envtools ipq-wifi-plasmacloud-pa1200
-endef
-TARGET_DEVICES += plasmacloud_pa1200
-
-define Device/plasmacloud_pa2200
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := Plasma Cloud
-	DEVICE_MODEL := PA2200
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@pc.pa2200
-	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
-	IMAGE_SIZE := 15552k
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200 uboot-envtools
-endef
-TARGET_DEVICES += plasmacloud_pa2200
-
-define Device/qcom_ap-dk01.1-c1
-	DEVICE_VENDOR := Qualcomm Atheros
-	DEVICE_MODEL := AP-DK01.1
-	DEVICE_VARIANT := C1
-	BOARD_NAME := ap-dk01.1-c1
-	SOC := qcom-ipq4019
-	DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
-	KERNEL_INSTALL := 1
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 26624k
-	$(call Device/FitImage)
-	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += qcom_ap-dk01.1-c1
-
-define Device/qcom_ap-dk04.1-c1
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Qualcomm Atheros
-	DEVICE_MODEL := AP-DK04.1
-	DEVICE_VARIANT := C1
-	SOC := qcom-ipq4019
-	DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
-	KERNEL_INSTALL := 1
-	KERNEL_SIZE := 4048k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := ap-dk04.1-c1
-endef
-TARGET_DEVICES += qcom_ap-dk04.1-c1
-
-define Device/qxwlan_e2600ac-c1
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Qxwlan
-	DEVICE_MODEL := E2600AC
-	DEVICE_VARIANT := C1
-	BOARD_NAME := e2600ac-c1
-	SOC := qcom-ipq4019
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 31232k
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
-endef
-TARGET_DEVICES += qxwlan_e2600ac-c1
-
-define Device/qxwlan_e2600ac-c2
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Qxwlan
-	DEVICE_MODEL := E2600AC
-	DEVICE_VARIANT := C2
-	SOC := qcom-ipq4019
-	KERNEL_INSTALL := 1
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
-endef
-TARGET_DEVICES += qxwlan_e2600ac-c2
-
-define Device/unielec_u4019-32m
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Unielec
-	DEVICE_MODEL := U4019
-	DEVICE_VARIANT := 32M
-	BOARD_NAME := u4019-32m
-	SOC := qcom-ipq4019
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 31232k
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += unielec_u4019-32m
-
-define Device/zyxel_nbg6617
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := ZyXEL
-	DEVICE_MODEL := NBG6617
-	SOC := qcom-ipq4018
-	KERNEL_SIZE := 4096k
-	ROOTFS_SIZE := 24960k
-	RAS_BOARD := NBG6617
-	RAS_ROOTFS_SIZE := 19840k
-	RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	IMAGES += factory.bin
-#	The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
-#	at least as large as the one of the initial firmware image (not the current
-#	one on the device). This only applies to the Web-UI, the bootlaoder ignores
-#	this minimum-size. However, the larger image can be flashed both ways.
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += zyxel_nbg6617
-
-define Device/zyxel_wre6606
-	$(call Device/FitImage)
-	DEVICE_VENDOR := ZyXEL
-	DEVICE_MODEL := WRE6606
-	DEVICE_DTS_CONFIG := config@4
-	SOC := qcom-ipq4018
-	IMAGE_SIZE := 13184k
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
-	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
-endef
-TARGET_DEVICES += zyxel_wre6606
+include $(SUBTARGET).mk
 
 $(eval $(call BuildImage))
diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
new file mode 100644
index 0000000000..9cd50e23ff
--- /dev/null
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -0,0 +1,809 @@
+
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
+DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
+
+define Device/FitImage
+	KERNEL_SUFFIX := -fit-uImage.itb
+	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_NAME := Image
+endef
+
+define Device/FitImageLzma
+	KERNEL_SUFFIX := -fit-uImage.itb
+	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_NAME := Image
+endef
+
+define Device/FitzImage
+	KERNEL_SUFFIX := -fit-zImage.itb
+	KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL_NAME := zImage
+endef
+
+define Device/UbiFit
+	KERNEL_IN_UBI := 1
+	IMAGES := nand-factory.ubi nand-sysupgrade.bin
+	IMAGE/nand-factory.ubi := append-ubi
+	IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/DniImage
+	$(call Device/FitzImage)
+	NETGEAR_BOARD_ID :=
+	NETGEAR_HW_ID :=
+	IMAGES += factory.img
+	IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
+	IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
+		append-rootfs | pad-rootfs | append-metadata | check-size
+endef
+
+define Build/append-rootfshdr
+	mkimage -A $(LINUX_KARCH) \
+		-O linux -T filesystem \
+		-C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+		-n root.squashfs -d $(IMAGE_ROOTFS) $@.new
+	dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
+endef
+
+define Build/mkmylofw_32m
+	$(eval device_id=$(word 1,$(1)))
+	$(eval revision=$(word 2,$(1)))
+
+	let \
+		size="$$(stat -c%s $@)" \
+		pad="$(subst k,* 1024,$(BLOCKSIZE))" \
+		pad="(pad - (size % pad)) % pad" \
+		newsize='size + pad'; \
+		$(STAGING_DIR_HOST)/bin/mkmylofw \
+		-B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
+		-s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
+		$@.new
+	@mv $@.new $@
+endef
+
+define Build/qsdk-ipq-factory-nand-askey
+	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
+		askey_kernel $(IMAGE_KERNEL) \
+		askey_fs $(IMAGE_ROOTFS) \
+		ubifs $@
+	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+	@mv $@.new $@
+endef
+
+define Build/SenaoFW
+	-$(STAGING_DIR_HOST)/bin/mksenaofw \
+		-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
+		-c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
+		-e $@ \
+		-o $@.new
+	@cp $@.new $@
+endef
+
+define Build/wrgg-image
+	mkwrggimg -i $@ \
+	-o $@.new \
+	-d "$(WRGG_DEVNAME)" \
+	-s "$(WRGG_SIGNATURE)" \
+	-v "" -m "" -B ""
+	mv $@.new $@
+endef
+
+define Device/8dev_habanero-dvk
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := 8devices
+	DEVICE_MODEL := Habanero DVK
+	IMAGE_SIZE := 30976k
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
+	IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
+endef
+TARGET_DEVICES += 8dev_habanero-dvk
+
+define Device/8dev_jalapeno-common
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	SOC := qcom-ipq4018
+endef
+
+define Device/8dev_jalapeno
+	$(call Device/8dev_jalapeno-common)
+	DEVICE_VENDOR := 8devices
+	DEVICE_MODEL := Jalapeno
+endef
+TARGET_DEVICES += 8dev_jalapeno
+
+define Device/alfa-network_ap120c-ac
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := ALFA Network
+	DEVICE_MODEL := AP120C-AC
+	SOC := qcom-ipq4018
+	DEVICE_PACKAGES := kmod-usb-acm \
+		kmod-tpm-i2c-atmel uboot-envtools
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 65536k
+	IMAGES := nand-factory.bin nand-sysupgrade.bin
+	IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += alfa-network_ap120c-ac
+
+define Device/aruba_glenmorangie
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Aruba
+	SOC := qcom-ipq4029
+	DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
+endef
+
+define Device/aruba_ap-303
+	$(call Device/aruba_glenmorangie)
+	DEVICE_MODEL := AP-303
+	DEVICE_PACKAGES += uboot-envtools
+endef
+TARGET_DEVICES += aruba_ap-303
+
+define Device/aruba_ap-303h
+	$(call Device/aruba_glenmorangie)
+	DEVICE_MODEL := AP-303H
+endef
+TARGET_DEVICES += aruba_ap-303h
+
+define Device/aruba_ap-365
+	$(call Device/aruba_glenmorangie)
+	DEVICE_MODEL := AP-365
+	DEVICE_PACKAGES += kmod-hwmon-ad7418 uboot-envtools
+endef
+TARGET_DEVICES += aruba_ap-365
+
+define Device/asus_map-ac2200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ASUS
+	DEVICE_MODEL := Lyra (MAP-AC2200)
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
+endef
+TARGET_DEVICES += asus_map-ac2200
+
+define Device/asus_rt-ac58u
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ASUS
+	DEVICE_MODEL := RT-AC58U
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DTB_SIZE := 65536
+	IMAGE_SIZE := 20439364
+	FILESYSTEMS := squashfs
+#	Someone - in their infinite wisdom - decided to put the firmware
+#	version in front of the image name \03\00\00\04 => Version 3.0.0.4
+#	Since u-boot works with strings we either need another fixup step
+#	to add a version... or we are very careful not to add '\0' into that
+#	string and call it a day.... Yeah, we do the latter!
+	UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
+	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
+		kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-ac58u
+
+define Device/avm_fritzbox-4040
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Box 4040
+	SOC := qcom-ipq4018
+	BOARD_NAME := fritz4040
+	IMAGE_SIZE := 29056k
+	UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
+	UBOOT_PARTITION_SIZE := 524288
+	IMAGES += eva.bin
+	IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
+	DEVICE_PACKAGES := fritz-tffs fritz-caldata
+endef
+TARGET_DEVICES += avm_fritzbox-4040
+
+define Device/avm_fritzbox-7530
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Box 7530
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
+endef
+TARGET_DEVICES += avm_fritzbox-7530
+
+define Device/avm_fritzrepeater-1200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Repeater 1200
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
+endef
+TARGET_DEVICES += avm_fritzrepeater-1200
+
+define Device/avm_fritzrepeater-3000
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Repeater 3000
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
+endef
+TARGET_DEVICES += avm_fritzrepeater-3000
+
+define Device/buffalo_wtr-m2133hp
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Buffalo
+	DEVICE_MODEL := WTR-M2133HP
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+endef
+TARGET_DEVICES += buffalo_wtr-m2133hp
+
+define Device/cellc_rtl30vw
+	KERNEL_SUFFIX := -fit-uImage.itb
+	KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
+	KERNEL_NAME := Image
+	KERNEL_IN_UBI :=
+	IMAGES := nand-factory.bin nand-sysupgrade.bin
+	IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
+	IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
+	DEVICE_VENDOR := Cell C
+	DEVICE_MODEL := RTL30VW
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@5
+	KERNEL_INSTALL := 1
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 57344k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
+endef
+TARGET_DEVICES += cellc_rtl30vw
+
+define Device/cilab_meshpoint-one
+	$(call Device/8dev_jalapeno-common)
+	DEVICE_VENDOR := Crisis Innovation Lab
+	DEVICE_MODEL := MeshPoint.One
+	DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
+endef
+TARGET_DEVICES += cilab_meshpoint-one
+
+define Device/compex_wpj419
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Compex
+	DEVICE_MODEL := WPJ419
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@12
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	FILESYSTEMS := squashfs
+endef
+TARGET_DEVICES += compex_wpj419
+
+define Device/compex_wpj428
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Compex
+	DEVICE_MODEL := WPJ428
+	SOC := qcom-ipq4028
+	DEVICE_DTS_CONFIG := config@4
+	BLOCKSIZE := 64k
+	IMAGE_SIZE := 31232k
+	KERNEL_SIZE := 4096k
+	IMAGES += cpximg-6a04.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
+	DEVICE_PACKAGES := kmod-gpio-beeper
+endef
+TARGET_DEVICES += compex_wpj428
+
+define Device/devolo_magic-2-wifi-next
+	$(call Device/FitImage)
+	DEVICE_VENDOR := devolo
+	DEVICE_MODEL := Magic 2 WiFi next
+	SOC := qcom-ipq4018
+	KERNEL_SIZE := 4096k
+
+	# If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
+	# it will bootm it, just like we want for the initramfs.
+	KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
+		append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
+
+	IMAGE_SIZE := 26624k
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next uboot-envtools
+endef
+TARGET_DEVICES += devolo_magic-2-wifi-next
+
+define Device/dlink_dap-2610
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := D-Link
+	DEVICE_MODEL := DAP-2610
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
+	BLOCKSIZE := 64k
+	WRGG_DEVNAME := /dev/mtdblock/8
+	WRGG_SIGNATURE := wapac30_dkbs_dap2610
+	IMAGE_SIZE := 14080k
+	IMAGES += factory.bin
+	# Bootloader expects a special 160 byte header which is added by
+	# wrgg-image.
+	# Factory image size must be larger than 6MB, and size in wrgg header must
+	# match actual factory image size to be flashable from D-Link http server.
+	# Bootloader verifies checksum of wrgg image before booting, thus jffs2
+	# cannot be part of the wrgg image. This is solved in the factory image by
+	# having the rootfs at the end of the image (without pad-rootfs). And in
+	# the sysupgrade image only the kernel is included in the wrgg checksum,
+	# but this is not flashable from the D-link http server.
+	# append-rootfs must start on an erase block boundary.
+	IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
+	IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
+	DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
+endef
+TARGET_DEVICES += dlink_dap-2610
+
+define Device/edgecore_ecw5211
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Edgecore
+	DEVICE_MODEL := ECW5211
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools
+endef
+TARGET_DEVICES += edgecore_ecw5211
+
+define Device/edgecore_oap100
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Edgecore
+	DEVICE_MODEL := OAP100
+	SOC := qcom-ipq4019
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGES := nand-sysupgrade.bin
+	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
+	DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
+endef
+TARGET_DEVICES += edgecore_oap100
+
+define Device/engenius_eap1300
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := EAP1300
+	DEVICE_DTS_CONFIG := config@4
+	BOARD_NAME := eap1300
+	SOC := qcom-ipq4018
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 25344k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += engenius_eap1300
+
+define Device/engenius_eap2200
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := EAP2200
+	SOC := qcom-ipq4019
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+endef
+TARGET_DEVICES += engenius_eap2200
+
+define Device/engenius_emd1
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := EMD1
+	DEVICE_DTS_CONFIG := config@4
+	SOC := qcom-ipq4018
+	IMAGE_SIZE := 30720k
+	IMAGES += factory.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
+endef
+TARGET_DEVICES += engenius_emd1
+
+define Device/engenius_emr3500
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := EMR3500
+	DEVICE_DTS_CONFIG := config@4
+	SOC := qcom-ipq4018
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 30720k
+	IMAGES += factory.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
+endef
+TARGET_DEVICES += engenius_emr3500
+
+define Device/engenius_ens620ext
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := ENS620EXT
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@4
+	BLOCKSIZE := 64k
+	PAGESIZE := 256
+	BOARD_NAME := ENS620EXT
+	VENDOR_ID := 0x0101
+	PRODUCT_ID := 0x79
+	PRODUCT_ID_NEW := 0xA4
+	DATECODE := 190507
+	FW_VER := 3.1.2
+	FW_VER_NEW := 3.5.6
+	CW_VER := 1.8.99
+	IMAGE_SIZE := 21312k
+	KERNEL_SIZE := 5120k
+	FILESYSTEMS := squashfs
+	IMAGES += factory_30.bin factory_35.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+	IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
+	IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
+endef
+TARGET_DEVICES += engenius_ens620ext
+
+define Device/ezviz_cs-w3-wd1200g-eup
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EZVIZ
+	DEVICE_MODEL := CS-W3-WD1200G
+	DEVICE_VARIANT := EUP
+	DEVICE_DTS_CONFIG := config@4
+	IMAGE_SIZE := 14848k
+	SOC := qcom-ipq4018
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+		append-metadata
+	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
+		ipq-wifi-ezviz_cs-w3-wd1200g-eup
+endef
+TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
+
+define Device/glinet_gl-ap1300
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-AP1300
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 131072k
+	KERNEL_INSTALL := 1
+	DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
+endef
+TARGET_DEVICES += glinet_gl-ap1300
+
+define Device/glinet_gl-b1300
+	$(call Device/FitImage)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-B1300
+	BOARD_NAME := gl-b1300
+	SOC := qcom-ipq4029
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 26624k
+	IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += glinet_gl-b1300
+
+define Device/glinet_gl-s1300
+	$(call Device/FitImage)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-S1300
+	SOC := qcom-ipq4029
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 26624k
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
+endef
+TARGET_DEVICES += glinet_gl-s1300
+
+define Device/linksys_ea6350v3
+	# The Linksys EA6350v3 has a uboot bootloader that does not
+	# support either booting lzma kernel images nor booting UBI
+	# partitions. This uboot, however, supports raw kernel images and
+	# gzipped images.
+	#
+	# As for the time of writing this, the device will boot the kernel
+	# from a fixed address with a fixed length of 3MiB. Also, the
+	# device has a hard-coded kernel command line that requieres the
+	# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
+	# Oh... and the kernel partition overlaps with the rootfs
+	# partition (the same for alt_kernel and alt_rootfs).
+	#
+	# If you are planing re-partitioning the device, you may want to
+	# keep those details in mind:
+	# 1. The kernel adresses you should honor are 0x00000000 and
+	#    0x02800000 respectively.
+	# 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
+	# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
+	# 4. The kernel command line from uboot is harcoded to boot with
+	#    rootfs either in mtd11 or mtd13.
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := EA6350
+	DEVICE_VARIANT := v3
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_SIZE := 3072k
+	IMAGE_SIZE := 37888k
+	UBINIZE_OPTS := -E 5
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
+	DEVICE_PACKAGES := uboot-envtools
+endef
+TARGET_DEVICES += linksys_ea6350v3
+
+define Device/linksys_ea8300
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := EA8300
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 3072k
+	IMAGE_SIZE := 87040k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
+	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += linksys_ea8300
+
+define Device/linksys_mr8300
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := MR8300
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 3072k
+	IMAGE_SIZE := 87040k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
+	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += linksys_mr8300
+
+define Device/luma_wrtq-329acn
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Luma Home
+	DEVICE_MODEL := WRTQ-329ACN
+	SOC := qcom-ipq4018
+	DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio uboot-envtools
+	IMAGE_SIZE := 76632k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+endef
+TARGET_DEVICES += luma_wrtq-329acn
+
+define Device/meraki_mr33
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Cisco Meraki
+	DEVICE_MODEL := MR33
+	SOC := qcom-ipq4029
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
+endef
+TARGET_DEVICES += meraki_mr33
+
+define Device/mobipromo_cm520-79f
+	$(call Device/FitzImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := MobiPromo
+	DEVICE_MODEL := CM520-79F
+	SOC := qcom-ipq4019
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += mobipromo_cm520-79f
+
+define Device/netgear_ex61x0v2
+	$(call Device/DniImage)
+	DEVICE_VENDOR := NETGEAR
+	DEVICE_DTS_CONFIG := config@4
+	NETGEAR_BOARD_ID := EX6150v2series
+	NETGEAR_HW_ID := 29765285+16+0+128+2x2
+	IMAGE_SIZE := 14400k
+	SOC := qcom-ipq4018
+endef
+
+define Device/netgear_ex6100v2
+	$(call Device/netgear_ex61x0v2)
+	DEVICE_MODEL := EX6100
+	DEVICE_VARIANT := v2
+endef
+TARGET_DEVICES += netgear_ex6100v2
+
+define Device/netgear_ex6150v2
+	$(call Device/netgear_ex61x0v2)
+	DEVICE_MODEL := EX6150
+	DEVICE_VARIANT := v2
+endef
+TARGET_DEVICES += netgear_ex6150v2
+
+define Device/openmesh_a42
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := OpenMesh
+	DEVICE_MODEL := A42
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@om.a42
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15616k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := uboot-envtools
+endef
+TARGET_DEVICES += openmesh_a42
+
+define Device/openmesh_a62
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := OpenMesh
+	DEVICE_MODEL := A62
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@om.a62
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15552k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
+endef
+TARGET_DEVICES += openmesh_a62
+
+define Device/plasmacloud_pa1200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Plasma Cloud
+	DEVICE_MODEL := PA1200
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@pc.pa1200
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15616k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := uboot-envtools ipq-wifi-plasmacloud-pa1200
+endef
+TARGET_DEVICES += plasmacloud_pa1200
+
+define Device/plasmacloud_pa2200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Plasma Cloud
+	DEVICE_MODEL := PA2200
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@pc.pa2200
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15552k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200 uboot-envtools
+endef
+TARGET_DEVICES += plasmacloud_pa2200
+
+define Device/qcom_ap-dk01.1-c1
+	DEVICE_VENDOR := Qualcomm Atheros
+	DEVICE_MODEL := AP-DK01.1
+	DEVICE_VARIANT := C1
+	BOARD_NAME := ap-dk01.1-c1
+	SOC := qcom-ipq4019
+	DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
+	KERNEL_INSTALL := 1
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 26624k
+	$(call Device/FitImage)
+	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += qcom_ap-dk01.1-c1
+
+define Device/qcom_ap-dk04.1-c1
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Qualcomm Atheros
+	DEVICE_MODEL := AP-DK04.1
+	DEVICE_VARIANT := C1
+	SOC := qcom-ipq4019
+	DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
+	KERNEL_INSTALL := 1
+	KERNEL_SIZE := 4048k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := ap-dk04.1-c1
+endef
+TARGET_DEVICES += qcom_ap-dk04.1-c1
+
+define Device/qxwlan_e2600ac-c1
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Qxwlan
+	DEVICE_MODEL := E2600AC
+	DEVICE_VARIANT := C1
+	BOARD_NAME := e2600ac-c1
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 31232k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
+endef
+TARGET_DEVICES += qxwlan_e2600ac-c1
+
+define Device/qxwlan_e2600ac-c2
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Qxwlan
+	DEVICE_MODEL := E2600AC
+	DEVICE_VARIANT := C2
+	SOC := qcom-ipq4019
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
+endef
+TARGET_DEVICES += qxwlan_e2600ac-c2
+
+define Device/unielec_u4019-32m
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Unielec
+	DEVICE_MODEL := U4019
+	DEVICE_VARIANT := 32M
+	BOARD_NAME := u4019-32m
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 31232k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += unielec_u4019-32m
+
+define Device/zyxel_nbg6617
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ZyXEL
+	DEVICE_MODEL := NBG6617
+	SOC := qcom-ipq4018
+	KERNEL_SIZE := 4096k
+	ROOTFS_SIZE := 24960k
+	RAS_BOARD := NBG6617
+	RAS_ROOTFS_SIZE := 19840k
+	RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	IMAGES += factory.bin
+#	The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
+#	at least as large as the one of the initial firmware image (not the current
+#	one on the device). This only applies to the Web-UI, the bootlaoder ignores
+#	this minimum-size. However, the larger image can be flashed both ways.
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += zyxel_nbg6617
+
+define Device/zyxel_wre6606
+	$(call Device/FitImage)
+	DEVICE_VENDOR := ZyXEL
+	DEVICE_MODEL := WRE6606
+	DEVICE_DTS_CONFIG := config@4
+	SOC := qcom-ipq4018
+	IMAGE_SIZE := 13184k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
+	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+endef
+TARGET_DEVICES += zyxel_wre6606
+
+$(eval $(call BuildImage))